Comparison of the Magnetic Properties of Metastable Hexagonal Close-Packed Ni Nanoparticles with Those of the Stable Face-Centered Cubic Ni Nanoparticles

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

ZnO-ferromagnetic metal vertically aligned nanocomposite thin films for magnetic, optical and acoustic metamaterials

Magnetoacoustic waves generated in piezoelectric and ferromagnetic coupled nanocomposite films through magnetically driven surface acoustic waves present great promise of loss-less data transmission. In this work, ferromagnetic metals of Ni, Co and Co x Ni1-x are coupled with a piezoelectric ZnO matrix in a vertically-aligned nanocomposite (VAN) thin film platform. Oxidation was found to occur in the cases of ZnO-Co, forming a ZnO-CoO VAN, while only very minor oxidation was found in the case of ZnO-Ni VAN. An alloy approach of Co x Ni1-x has been explored to overcome the oxidation during growth. Detailed microstructural analysis reveals limited oxidation of both metals and distinct phase separation between the ZnO and the metallic phases. Highly anisotropic properties including anisotropic ferromagnetic properties and hyperbolic dielectric functions are found in the ZnO-Ni and ZnO-Co x Ni1-x systems. The magnetic metal-ZnO-based hybrid metamaterials in this report present great potential in coupling of optical, magnetic, and piezoelectric properties towards future magnetoacoustic wave devices.

Gamma-radiation induced synthesis of freestanding nickel nanoparticles

A versatile method to produce metallic nickel nanoparticles is demonstrated. Metallic Ni nanoparticles have been synthesized from aqueous solution of NiCl₂ using γ-radiation induced reduction. To prevent Ni re-oxidation, post-irradiation treatment was elaborated. Structural and compositional analyses were executed using X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. These studies reveal that the synthesized material consists of fcc Ni particles having size of 3.47 ± 0.71 nm. The nanoparticles have a tendency to agglomerate to the larger clusters. The latter are partially oxidized to form thin amorphous/poor-crystalline Ni(OH)₂/NiO layers at the surface. Magnetization measurements demonstrate that the nanomaterial exhibit ferromagnetic-like behaviour with magnetization 30% lower than that in bulk Ni. The large active surface area (ECSA, 39.2 m² g^-1) and good electrochemical reversibility, confirmed by the electrochemical studies, make the synthesized material a potential candidate as an active component for energy storage devices.

Functionalization of biopolymer fibers with magnetic nanoparticles

Hybrid fibers consisting of biopolymers and inorganic nanoparticles are receiving increasing attention due to their unique properties. Commonly, the nanoparticles are chosen for their intrinsic properties such as magnetic, thermal, or electrical conductivity. The biopolymer component of the hybrid fiber is chosen for its mechanical properties and ability to act as a scaffold or matrix for the nanoparticles. While there are many fiber-forming synthetic polymers, there has been a recent interest in replacing these systems with biopolymers due to their sustainability, biocompatibility, nontoxicity, and biodegradability. Fibers made from biopolymers have one additional benefit over synthetic polymers as they make good scaffolds for embedding nanoparticles without the need of any additional bonding agents. In particular, naturally occurring biopolymers such as proteins exhibit a myriad of interactions with nanoparticles, including ionic, H-bonding, covalent, Van der Waals, and electrostatic interactions. The diverse range of interactions between magnetic nanoparticles and biopolymers makes resulting hybrid fibers of particular interest as magnetic-responsive materials. Magnetically responsive hybrid biopolymer fibers have many features, including enhanced thermal stabilities, strong mechanical toughness, and perhaps most interestingly multifunctionality, allowing for a wide range of applications. These applications range from biosensing, filtration, UV shielding, antimicrobial, and medical applications, to name a few. Here, we review established hybrid fibers consisting of biopolymers and nanoparticles with a primary focus on biopolymers doped with magnetic nanoparticles and their various putative applications.

Influence of heating rate, temperature, pressure on the structure, and phase transition of amorphous Ni material: A molecular dynamics study

The present article is aimed to investigate influence of the heating rate, temperature (T), pressure (P) on the structure and phase transition of amorphous Ni material with heating rate 2 × 105, 2 × 106 and 2 × 107 K/s at T = 300 K; T = 300, 400, 500, 600, 700, 800, 900 and 1000 K at heating rate 2 × 106 K/s; T = 300, 621 and 900 K at P = 1, 2, 3, 4 and 5 GPa by molecular dynamics simulation method with Sutton-Chen embedded potential and periodic boundary conditions. The structure of amorphous Ni material determined through the radial distribution function, the total energy, the size and the average coordination number. The phase transition and the glass transition temperature determined through the relationship between the total energy and temperature. The result shows that when the heating rate increases, the first peak's position for the radial distribution function is 2.45 Å and a constant, the first peak's height, the total energy and the size increase, the average coordination number decreases from 13 to 12. When temperature increases from 300 to 1000 K at P = 0 GPa, the position decreases from 2.45 Å to 2.40 Å, the average coordination number is 13 and a constant, glass transition temperature is 631 K, the total energy increases, the size increases and happens the phase transition from the amorphous state to the liquid state. When pressure increases from 0 GPa to 5 GPa at T = 300, 621 and 900 K, the position decreases, the height increases, the total energy increases, the size decreases, the average coordination number decreases from 13 to 12, that shows with amorphous Ni material when increasing heating rate, T, P lead to structural change, phase transition of materials is significant.

Synthesis of Metallic Nanocrystals: From Noble Metals to Base Metals

Metallic nanocrystals exhibit superior properties to their bulk counterparts because of the reduced sizes, diverse morphologies, and controllable exposed crystal facets. Therefore, the fabrication of metal nanocrystals and the adjustment of their properties for different applications have attracted wide attention. One of the typical examples is the fabrication of nanocrystals encased with high-index facets, and research on their magnified catalytic activities and selections. Great accomplishment has been achieved within the field of noble metals such as Pd, Pt, Ag, and Au. However, it remains challenging in the fabrication of base metal nanocrystals such as Ni, Cu, and Co with various structures, shapes, and sizes. In this paper, the synthesis of metal nanocrystals is reviewed. An introduction is briefly given to the metal nanocrystals and the importance of synthesis, and then commonly used synthesis methods for metallic nanocrystals are summarized, followed by specific examples of metal nanocrystals including noble metals, alloys, and base metals. The synthesis of base metal nanocrystals is far from satisfactory compared to the tremendous success achieved in noble metals. Afterwards, we present a discussion on specific synthesis methods suitable for base metals, including seed-mediated growth, ligand control, oriented attachment, chemical etching, and Oswald ripening, based on the comprehensive consideration of thermodynamics, kinetics, and physical restrictions. At the end, conclusions are drawn through the prospect of the future development direction.

Stabilizing and Activating Metastable Nickel Nanocrystals for Highly Efficient Hydrogen Evolution Electrocatalysis

Exploring high-performance and cost-efficient electrocatalysts with unusual metastable phase offers opportunities for improving the electrochemical hydrogen generation, while it remains a great challenge to achieve them with desirable activity and stability. Herein, we report that the doping engineering in a metastable, hexagonal-close-packed nickel (hcp Ni) electrocatalyst is a largely unrevealed yet important factor in achieving an extremely active and stable electrocatalyst toward alkaline hydrogen evolution reaction (HER). Theoretical predications and experimental results suggest that, while the stability of metastable hcp Ni electrocatalyst can be largely improved via the manganese (Mn) doping due to the lower formation energy and lattice stabilization, the MnO/hcp Ni surface promotes the HER via intrinsic favorable H₂O adsorption and fast water dissociation kinetics. Consequently, the Mn-doped hcp Ni electrocatalyst shows a small overpotential of 80 mV at 10 mA/cm² and a low Tafel slope of 68 mV/dec. The result is even approaching that of the commercial Pt/C, being one of the best reported non-noble metal HER electrocatalysts in alkaline media. Under long-term chronopotentiometry measurement, such electrocatalyst can endure at least 10 h with negligible activity decay and structure change. The present work demonstrates the dimension in boosting the electrocatalysis by doping engineering of metastable electrocatalysts.

Syntheses and Properties of Metal Nanomaterials with Novel Crystal Phases

In recent decades, researchers have devoted tremendous effort into the rational design and controlled synthesis of metal nanomaterials with well-defined size, morphology, composition, and structure, and great achievements have been reached. However, the crystal-phase engineering of metal nanomaterials still remains a big challenge. Recent research has revealed that the crystal phase of metal nanomaterials can significantly alter their properties, arising from the distinct atomic arrangement and modified electronic structure. Until now, it has been relatively uncommon to synthesize metal nanomaterials with novel crystal phases in spite of the fact that these nanostructures would be promising for various applications. Here, the research progress regarding the fine control of noble metal (Au, Ag, Ru, Rh, Pd) and non-noble metal (Fe, Co, Ni) nanomaterials with novel crystal phases is reviewed. First, synthesis strategies and their phase transformations are summarized, while highlighting the peculiar characteristics of each element. The phase-dependent properties are then discussed by providing representative examples. Finally, the challenges and perspectives in this emerging field are proposed.

Radiation-induced synthesis of nanoscale Co- and Ni-based electro-catalysts on carbon for the oxygen reduction reaction

A facile synthesis of 3d-metal based electro-catalysts directly incorporated into a carbon support was carried out by γ-radiation.

Effect of Particle Size on the Magnetic Properties of Ni Nanoparticles Synthesized with Trioctylphosphine as the Capping Agent

Magnetic cores of passive components are required to have low hysteresis loss, which is dependent on the coercive force. Since it is well known that the coercive force becomes zero at the superparamagnetic regime below a certain critical size, we attempted to synthesize Ni nanoparticles in a size-controlled fashion and investigated the effect of particle size on the magnetic properties. Ni nanoparticles were synthesized by the reduction of Ni acetylacetonate in oleylamine at 220 °C with trioctylphosphine (TOP) as the capping agent. An increase in the TOP/Ni ratio resulted in the size decrease. We succeeded in synthesizing superparamagnetic Ni nanoparticles with almost zero coercive force at particle size below 20 nm by the TOP/Ni ratio of 0.8. However, the saturation magnetization values became smaller with decrease in the size. The saturation magnetizations of the Ni nanoparticles without capping layers were calculated based on the assumption that the interior atoms of the nanoparticles were magnetic, whereas the surface-oxidized atoms were non-magnetic. The measured and calculated saturation magnetization values decreased in approximately the same fashion as the TOP/Ni ratio increased, indicating that the decrease could be mainly attributed to increases in the amounts of capping layer and oxidized surface atoms.

61Ni synchrotron radiation-based Mössbauer spectroscopy of nickel-based nanoparticles with hexagonal structure

We measured the synchrotron-radiation (SR)-based Mössbauer spectra of Ni-based nanoparticles with a hexagonal structure that were synthesised by chemical reduction. To obtain Mössbauer spectra of the nanoparticles without ⁶¹Ni enrichment, we developed a measurement system for ⁶¹Ni SR-based Mössbauer absorption spectroscopy without X-ray windows between the ⁶¹Ni₈₄V₁₆ standard energy alloy and detector. The counting rate of the ⁶¹Ni nuclear resonant scattering in the system was enhanced by the detection of internal conversion electrons and the close proximity between the energy standard and the detector. The spectrum measured at 4 K revealed the internal magnetic field of the nanoparticles was 3.4 ± 0.9 T, corresponding to a Ni atomic magnetic moment of 0.3 Bohr magneton. This differs from the value of Ni₃C and the theoretically predicted value of hexagonal-close-packed (hcp)-Ni and suggested the nanoparticle possessed intermediate carbon content between hcp-Ni and Ni₃C of approximately 10 atomic % of Ni. The improved ⁶¹Ni Mössbauer absorption measurement system is also applicable to various Ni materials without ⁶¹Ni enrichment, such as Ni hydride nanoparticles.

Nickel nanoparticles with hcp structure: Preparation, deposition as thin films and application as electrochemical sensor

Hexagonal close packed (hcp) nickel nanoparticles stabilized by polyvinylpyrrolidone (PVP) were synthesized through the thermal treatment of face centered cubic (fcc) nickel nanoparticles. Controlling both the temperature of the heat treatment and the amount of PVP was possible the control of the hcp/fcc rate in the samples, where the higher Ni/PVP ratio produces only the hcp-nickel phase (average size of 8.9 nm) highly stable in air. The crystalline structure, the presence of PVP, the size of the nanoparticles and the stability of the hcp-nickel were confirmed using X-ray diffractometry, Fourier transform infrared spectroscopy, transmission electron microscopy, Raman spectroscopy, scanning electron microscopy and thermogravimetric analysis. Thin films of hcp and fcc nickel nanoparticles were prepared through a biphasic system and deposited over indium-doped tin oxide (ITO) substrates, which were electrochemically characterized and applied as glycerol amperometric sensors in NaOH medium. Parameters as the number of cycles applied and the scan rate were evaluated and indicate that hcp nickel nanoparticles are more reactive to form Ni(OH)2 and lead to more electroactive Ni(OH)2 structure. The hcp nickel nanoparticles-modified electrode showed the best sensitivity (0.258 μA L μmol(-1)) and detection limit (2.4 μmol L(-1)) toward glycerol.

Facile synthesis of nickel based nanostructures from Ni[EMIM]Cl2 ionic liquid precursor: effects of thermal and chemical methods on the properties of nanoparticles

Graphical representation of the preparation of ionic liquid precursor for the preparation of Ni nanostructures.

Facile one-pot synthesis of highly monodisperse nickel microspheres with raised nickel dots and their adsorption performance for heavy metal ions

Monodispersed Ni microspheres with surfaces uniformly covered by Ni dots were constructed through a facile solvothermal synthesis, showing an improved ability to remove Cd²⁺ ions even at high concentrations in water.

Promoting effect of Co in Ni(m)Co(n) (m + n = 4) bimetallic electrocatalysts for methanol oxidation reaction

Ni-based bimetallic alloys have superior physiochemical characteristics compared to monometallic Ni. In this study, a new type of low cost bimetallic NimCon (n + m = 4) electrocatalysts with high active surface were synthesized on Ti substrate through a hydrogen evolution assisted electrodeposition method. The as-prepared NimCon were characterized by XRD, EDS, and SEM. It was revealed that the composition, surface morphology, as well as the crystal phase structure of the bimetallic NimCon electrocatalysts were significantly changed with the increased content of cobalt. Electrochemical measurements showed that the bimetallic NimCon catalysts, compared with the monometallic Ni, have superior catalytic activity and stability toward the methanol electrooxidation reaction. Additionally, Ni2Co2 sample presented the highest oxidation current density and the best durability. The mechanism study based on electrochemical experiments and density functional theory based calculations showed that the doping of Co in NimCon can signally improve the surface coverage of the redox species, weaken the CO adsorption, as well as adjust the CH3OH adsorption. Such understanding is of important directive significance to design efficient nonprecious catalysts.

Anomalous self-reduction of layered double hydroxide (LDH): from α-Ni(OH)2 to hexagonal close packing (HCP) Ni/NiO by annealing without a reductant

An anomalous self-reduction phenomenon can occur for Ni LDH synthesized from an ionic liquid system.

Trioctylphosphine as self-assembly inducer

Nickel nanoparticles (NPs) of different shapes and sizes in polydispersed as well as monodispersed forms were synthesized using trioctylphosphine (TOP), triphenylphosphine (TPP), oleylamine (OA) and their combinations as surfactants to study their self-assembly inducing capabilities. Randomly agglomerated polydispersed NPs were found for TPP and OA, and TPP or OA separately. However, in consolidation with the earlier report of Singh et al., J. Mater. Chem. C, 2014, 2, 8918, NPs formed using TOP only and a combination of TOP with OA naturally exhibited monodispersed NPs associated with natural nanolattice formation without any other external force or surfactants, demonstrating clearly the self-inducing capacity of TOP into monodispersed NPs and their self-assembled nanolattices. Fourier-transformed infra-red (FTIR) data clearly indicated the capping of these surfactants along with acetylacetonate ligands from nickel acetylacetonate precursor on the surface of the NPs. Remarkably, the narrowest zeta potential (ζ) base-widths were observed for samples possessing a self-assembled nanolattice, compared to the broader ones for randomly agglomerated particles.

Size-controlled synthesis, characterization and electrocatalytic behaviors of polymer-protected nickel nanoparticles: a comparison with respect to two polymers

A facile reduction of nickel chloride in aqueous solution with sodium borohydride leads to fairly monodisperse, and electrochemically active nickel nanoparticles by the separate use of a capping polymer like polyvinyl pyrrolidone (PVP) and polyacrylic acid (PAA).

Chemical synthesis and structural characterization of highly disordered N colloidal nanoparticles

This work focuses on synthetic methods to produce monodisperse Ni colloidal nanoparticles (NPs), in the 4-16 nm size range, and their structural characterization. Narrow size distribution nanoparticles were obtained by high-temperature reduction of a nickel salt and the production of tunable sizes of the Ni NPs was improved compared to other methods previously described. The as-synthesized nanoparticles exhibited spherical shape and highly disordered structure, as it could be assigned by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). Annealing at high temperature in organic solvent resulted in an increase of nanoparticle atomic ordering; in this case, the XRD pattern showed an fcc-like structure. Complementary data obtained by X-ray absorption spectroscopy confirmed the complex structure of these nanoparticles. Temperature dependence of the magnetic susceptibility of these highly disordered Ni NPs showed the magnetic behavior cannot be described by the conventional superparamagnetic theory, claiming the importance of the internal structure in the magnetic behavior of such nanomaterials.