Structural Transformation of Au−Pd Bimetallic Nanoclusters on Thermal Heating and Cooling: A Dynamic Analysis

Tuning the surface properties of AuPd nanoparticles for adsorption of O and CO

Bimetallic nanoparticles are attracting increasing attention as effective catalysts because they can exhibit higher efficiencies than their monometallic counterparts. Recent studies show that PdAu nanoparticles can exhibit truly impressive catalytic activity, due to the synergistic effect of their properties. However, fine-tuning the catalytic activity requires an understanding of the full picture of the processes taking place in bimetallic particles of different compositions and structures. Here we study the influence of the structure and composition of PdAu nanoparticles on their electronic properties, charge distribution and adsorption properties (CO and O) using ab initio calculations. Two types of nanoparticles were considered: core-shell (Pd@Au and Au@Pd) and bimetallic alloy (Au-Pd) with an average diameter of 2 nm (321 atoms), having either fcc, icosahedral or amorphous structures. The results obtained on surface charges show the possibility of fine-tuning the surface properties of nanoparticles by modifying their atomic structure and composition. In addition, the adsorption of O and CO on the surface of PdAu nanoparticles with fcc structure has been studied. The obtained adsorption data correlate with the surface charge redistribution and the d-band center. The results of this study thus open up great prospects for tuning the catalytic properties of nanocatalysts by modifying their local atomic environment.

Two-Steps Versus One-Step Solidification Pathways of Binary Metallic Nanodroplets

The solidification of AgCo, AgNi, and AgCu nanodroplets is studied by molecular dynamics simulations in the size range of 2-8 nm. All these systems tend to phase separate in the bulk solid with surface segregation of Ag. Despite these similarities, the simulations reveal clear differences in the solidification pathways. AgCo and AgNi already separate in the liquid phase, and they solidify in configurations close to equilibrium. They can show a two-step solidification process in which Co-/Ni-rich parts solidify at higher temperatures than the Ag-rich part. AgCu does not separate in the liquid and solidifies in one step, thereby remaining in a kinetically trapped state down to room temperature. The solidification mechanisms and the size dependence of the solidification temperatures are analyzed, finding qualitatively different behaviors in AgCo/AgNi compared to AgCu. These differences are rationalized by an analytical model.

Theoretical design of a technetium-like alloy and its catalytic properties

Based on the concept of density of states (DOS) engineering, we theoretically designed a pseudo-Tc material (Mo-Ru alloy) and investigated its electronic structure, phase stability and catalytic activity by using density functional theory. Through comparing the DOS shape, peak distribution, and DOS area differences between Tc and the Mo-Ru alloy, we noticed that bcc-Mo8Ru8 and hcp-Mo8Ru8 had the most similar electronic structures to Tc. The excess energies after entropy correction of hcp-Mo8Ru8 and bcc-Mo8Ru8 are stable when the temperature is up to 765 and 745 K, respectively. These results provided the possibility of pseudo-Tc alloy (hcp-Mo8Ru8 and bcc-Mo8Ru8) synthesis. Finally, according to reaction coordinate analysis, the similar catalytic activity between hcp-Mo8Ru8 and Tc have been demonstrated in CO oxidation and N2 dissociation. In N2 dissociation, Tc has a suitable ratio of transition state (TS) barrier to reaction energy which make Tc an efficient catalyst for NH3 synthesis, in addition to our designed pseudo-Tc (hcp-MoRu) because of the similar electronic structures. Our finding provides valuable insight into materials and catalyst design.

Atomic-Scale Structure and Stress Release Mechanism in Core-Shell Nanoparticles

Core-shell nanoparticles find applications in catalysts, sensors, and theranostics. The full internal 3D atomic structure, however, cannot be resolved by current imaging and diffraction techniques. We analyzed the atomic positions and stress-release mechanism in a cubic Au-Pd core-shell nanoparticle in approximately 1000 times higher resolution than current experimental techniques using large-scale molecular dynamics simulation to overcome these limitations. The core-shell nanocube of 73 nm size was modeled similarly to solution synthesis by random epitaxial deposition of a 4 nm thick shell of Pd atoms onto a Au core of 65 nm side length using reliable interatomic potentials. The internal structure reveals specific deformations and stress relaxation mechanisms that are caused by the +4.8% lattice mismatch of gold relative to palladium and differential confinement of extended particle facets, edges, and corners by one, two, or three Au-Pd interfaces, respectively. The three-dimensional lattice strain causes long-range, arc-like bending of atomic rows along the faces and edges of the particle, especially near the Au-Pd interface, a bulging deformation of the Pd shell, and stacking faults in the Pd shell at the corners of the particle. The strain pattern and mechanism of stress release were further characterized by profiles of the atomic layer spacing in the principal crystallographic directions. Accordingly, strain in the Pd shell is several times larger in the extended facets than near the edges and corners of the nanoparticle, which likely affects adsorption, optical, and electrochemical properties. The findings are consistent with available experimental data, including 3D reconstructions of the same cubic nanoparticle by coherent diffractive imaging (CDI) and may be verified by more powerful experimental techniques in the future. The stress release mechanisms are representative for cubic core-shell nanoparticles with fcc structure and can be explored for different shapes by the same methods.

Structural Rearrangement of Au-Pd Nanoparticles under Reaction Conditions: An ab Initio Molecular Dynamics Study

The structure, composition, and atomic distribution of nanoalloys under operating conditions are of significant importance for their catalytic activity. In the present work, we use ab initio molecular dynamics simulations to understand the structural behavior of Au-Pd nanoalloys supported on rutile TiO₂ under different conditions. We find that the Au-Pd structure is strongly dependent on the redox properties of the support, originating from strong metal-support interactions. Under reducing conditions, Pd atoms are inclined to move toward the metal/oxide interface, as indicated by a significant increase of Pd-Ti bonds. This could be attributed to the charge localization at the interface that leads to Coulomb attractions to positively charged Pd atoms. In contrast, under oxidizing conditions, Pd atoms would rather stay inside or on the exterior of the nanoparticle. Moreover, Pd atoms on the alloy surface can be stabilized by hydrogen adsorption, forming Pd-H bonds, which are stronger than Au-H bonds. Our work offers critical insights into the structure and redox properties of Au-Pd nanoalloy catalysts under working conditions.

Silver-Free Gold Nanocages with Near-Infrared Extinctions

This article reports the preparation of silver-free Au nanocages from cubic palladium templates. Pd nanocubes were subjected to galvanic replacement with Au³⁺ to produce Pd@Au nanocages having tunable dimensions (i.e., edge length, gold layer thickness, and hollow pore size), which allowed selectable positioning of the optical extinction maxima from the visible to the near infrared. These new nanocages circumvent the problems associated with previous Ag-derived gold alloy nanocages, which suffer from the toxicity of residual silver and the possible fragmentation of such alloyed nanostructures, thereby limiting their potential applications. In contrast, the present materials represent stable, nontoxic, tunable, and hollow plasmonic nanostructures.

Electronic Structure and Phase Stability of PdPt Nanoparticles

To understand the origin of the physicochemical nature of bimetallic PdPt nanoparticles, we theoretically investigated the phase stability and electronic structure employing the PdPt nanoparticles models consisting of 711 atoms (ca. 3 nm). For the Pd-Pt core-shell nanoparticle, the PdPt solid-solution phase was found to be a thermodynamically stable phase in the nanoparticle as the result of difference in surface energy of Pd and Pt nanoparticles and configurational entropy effect, while it is well known that the Pd and Pt are the immiscible combination in the bulk phase. The electronic structure of nanoparticles is conducted to find that the electron transfer occurs locally within surface and subsurface layers. In addition, the electron transfer from Pd to Pt at the interfacial layers in core-shell nanoparticles is observed, which leads to unique geometrical and electronic structure changes. Our results show a clue for the tunability of the electronic structure of nanoparticles by controlling the arrangement in the nanoparticles.

Propene adsorption on gold–palladium nanoalloys supported on bundle nanotubes

Propene adsorption on (Pd–Au)_N nanoalloys supported on carbon nanotube (CNT) bundles has been investigated using molecular dynamics (MD) simulations at 300 K.

A facile route to model catalysts: the synthesis of Au@Pd core-shell nanoparticles on γ-Fe₂O₃ (0001)

A straightforward method of synthesising Au@Pd core-shell particles on a well characterised γ-Fe₂O₃ (0001) substrate has been developed which will enable fundamental studies into the surface chemistry of these catalytically interesting systems. Au and Pd were sequentially deposited onto a γ-Fe₂O₃ (0001) substrate in ultra high vacuum by metal vapour deposition and probed by LEIS and STM. Deposition of Au followed by heating at 573 K formed nanoparticles of 5 to 10 nm in diameter whereas subsequent deposition of Pd produced smaller nanoparticles of 2 to 4 nm diameter. At this stage, LEIS shows both metals to be present but heating the combined system to 573 K resulted in the loss of the Au signal in the LEIS and disappearance of the smaller particles from the STM images indicating the formation of Au@Pd core-shell structures.

Configuration of microbially synthesized Pd-Au nanoparticles studied by STEM-based techniques

Bimetallic Pd-Au particles synthesized using Desulfovibrio desulfuricans bacteria are characterized using scanning transmission electron microscopy (STEM) with a high-angle annular dark field (HAADF) detector combined with energy dispersive x-ray (EDX) silicon drift detector (SDD) elemental mapping and plasmon electron energy-loss spectroscopy (EELS). When combined with EDX, theoretical considerations or EELS, the atomic-number contrast (Z-contrast) provided by HAADF-STEM is effective in characterizing the compositional configuration of the bimetallic nanoparticles. Homogeneous mixing and complex segregations have been found for different particles in this work. The EELS study has also found different behaviours corresponding to surface plasmon resonances in different regions of a single particle due to its heterogeneity and anisotropy. HAADF-STEM tomography has been performed to obtain three-dimensional (3D) visualization of the nanoparticles.

Structural analysis of PdAu dendrimer-encapsulated bimetallic nanoparticles

PdAu dendrimer-encapsulated nanoparticles (DENs) were prepared via sequential reduction of the component metals. When Au is reduced onto 55-atom, preformed Pd DEN cores, analysis by UV-vis spectroscopy, electron microscopy, and extended X-ray absorption fine structure (EXAFS) spectroscopy leads to a model consistent with inversion of the two metals. That is, Au migrates into the core and Pd resides on the surface. However, when Pd is reduced onto a 55-atom Au core, the expected Au core-Pd shell structure results. In this latter case, the EXAFS analysis suggests partial oxidation of the relatively thick Pd shell. When the DENs are extracted from their protective dendrimer stabilizers by alkylthiols, the resulting monolayer-protected clusters retain their original Au core-Pd shell structures. The structural analysis is consistent with a study of nanoparticle-catalyzed conversion of resazurin to resorufin. The key conclusion from this work is that correlation of structure to catalytic function for very small, bimetallic nanoparticles requires detailed information about atomic configuration.

Two-stage melting of Au-Pd nanoparticles

Several series of molecular dynamics runs were performed to simulate the melting transition of bimetallic cuboctahedral nanoparticles of gold-palladium at different relative concentrations to study their structural properties before, in, and after the transition. The simulations were made in the canonical ensemble, each series covering a range of temperatures from 300 to 980 K, using the Rafii-Tabar version of the Sutton and Chen interatomic potential for metallic alloys. We found that the melting transition temperature has a strong dependence on the relative concentrations of the atomic species. We also found that, previous to the melting transition, the outer layer of the nanoparticle gets disordered in what can be thought as a premelting stage, where Au atoms near the surface migrate to the surface and remain there after the particle melts as a whole. The melting of the surface below Tm is consistent with studies of the interaction of a TEM electron beam with Au and Au-Pd nanoparticles.

Structural Selection and Amorphization of Small Ni−Ti Bimetallic Clusters

Classical molecular dynamics simulation is used for structural thermodynamic analysis of Ni-Ti bimetallic clusters. Experimental observation for the nanoclusters synthesized by the bioreduction method is used to consolidate the conclusion. The results demonstrate that Ni-Ti nanoclusters as small as 2-3 nm are not energetically favorable for common ordered geometrical arrangements such as cuboctahedron, decahedron, and icosahedron, though they can be synthesized experimentally. For the elemental distribution, Ni and Ti tend to aggregate separately. In the cases under study, eutectic-like and Ni-core/Ti-shell structures can keep their basic shape and elemental distribution during long periods of relaxation at room temperature. For other cases such as solid solution and Ti-core/Ni-shell, the structures amorphized and the elements tend to distribute uniformly even though they are at temperatures as low as room temperature. Experimental evidence was obtained by the analysis of biosynthesized nanoparticles using transmission electron microscopy techniques. This allowed determination of the partial amorphized structures of small bimetallic particles with cubic and multiple twined-like structures.