Aggregate Transitions in Mixtures of Anionic Sulfonate Gemini Surfactant with Cationic Ammonium Single-Chain Surfactant

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

Wormlike micellar solutions formed by an anionic surfactant and a cationic surfactant with two head groups

Innovation in the molecular structure of surfactants is important for the preparation of soft materials with novel properties. In this study, we synthesized a cationic surfactant, N1,N1,N1,N1,N3,N3,N3-pentamethyl-N3-(3-stearamidopropyl)propane-1,3-diammonium bromide, hereafter referred to as C18-DQA. Unlike conventional cationic surfactants, C18-DQA contains two quaternary ammonium head groups and a long-saturated alkyl chain equal to a chain length of 21 carbon atoms. C18-DQA exhibits a low Krafft point of ∼0 °C and a water solubility >1000 mM at 25 °C. The critical micelle concentration (cmc) of C18-DQA was determined to be 0.59 mM using the Nile red method. C18-DQA was mixed with sodium laurate (SL) at different molar ratios to produce transparent solutions with excellent viscoelasticity over a wide concentration range. The 1 : 1.5 molar ratio C18-DQA/SL mixed solutions exhibited gel-like behavior for a total surfactant concentration of 2.88 wt% (75 mM). The solution with a total surfactant concentration of 300 mM (120 mM C18-DQA and 180 mM SL) achieved a maximum zero-shear viscosity (η0) of 4224 Pa s. Cryogenic transmission electron microscopy analysis revealed the formation of extremely long wormlike micelles, with a cross-sectional diameter of 5 nm and contour length >3 μm, in the mixed solutions. C18-DQA and SL molecules were drawn close by electrostatic attractions, leading to a suitable molecular geometry for the extensive growth of wormlike micelles. This work will act as an important reference for the future preparation of highly viscoelastic solutions by mixing cationic and anionic surfactants. The proposed system is also expected to have potential applications in cosmetic formulations, home care products, and oilfield fracturing fluids.

Effects of inorganic metal ions on the mixture of single polyoxyethylene chain carboxylate surfactant and Gemini quaternary ammonium surfactant

Anionic and cationic surfactants have high surface activity due to their strong synergistic effect. However, the traditional ionic surfactants with excellent application properties are easy to precipitate in the mixture...

Thermodynamic insights and molecular environments into catanionic surfactant systems: Influence of chain length and molar ratio

HYPOTHESIS

Imidazolium-based Ionic liquids as new generation cationic surfactants can provide designable alkyl chain length. In the catanionic surfactant systems, the alkyl chain lengths and molar ratios can greatly influence the interactions such as electrostatic and hydrophobic interaction. The variation in these interactions has a significant effect on the molecular environments of the self-assembly structure, and this process is always accompanied by the transition of aggregates and release or consumption of heat. Hence, it is of interest to study the relationship between intermolecular interactions, molecular environments, self-assembly structure and the change in energy of system in the catanionic surfactant mixed systems.

EXPERIMENTS

The enthalpy change ΔH of titrations the imidazolium-based into SDS micelle solution was studied to characterize the heat by using isothermal titration calorimetry (ITC) during the transitions of the aggregate structures. The corresponding self-assembly structure was monitored via cryogenic transmission electron microscopy (cryo-TEM). Employing proton magnetic resonance (¹H NMR), we focus on the interactions between imidazolium-based ILs and SDS based on the variations in the molecular environments of aggregates.

FINDINGS

Of these imidazolium-based ionic liquids/SDS system, the 1-octyl-3-methylimidazolium ([OMIM]Cl)/SDS system shows several features such as intense energy absorption and releasing processes, which indicate the formation of high entanglement wormlike micelles and vesicles. This is related to the formation of self-adjusting state between the SDS and [OMIM]Cl molecules due to the balance between the electrostatic interaction and hydrophobic interaction. Varying the alkyl chain length appears to cause significant differences to the molecular environments. From the molecular environments, three different models about the polarity of the catanionic surfactant molecules are used to explain the balance of the intermolecular interactions.

Responsive morphology transition from micelles to vesicles based on dynamic covalent surfactants

A dynamic covalent bond is widely used to fabricate stimuli responsive systems due to its reversible molecular recognition properties. In this study, we developed a pH-responsive morphology transition system based on a mixture of a cationic surfactant CTAB and two nonamphiphilic precursors, 4-hydroxybenzaldehyde (HB) and octylamine (OA), at a molar ratio of 100 : 60 : 60 (CTAB/HB/OA). The morphology transition of CTAB/HB/OA was characterized by 1H NMR spectroscopy, Fourier transform infrared spectroscopy, macroscopic appearance observation, dynamic light scattering, and rheological and cryo-TEM measurements. The phase behavior of CTAB/HB/OA solutions underwent transition from a water-like fluid to a transparent gel-like solution and then converted into a turbid low-viscosity solution upon increasing the pH. Upon increasing the pH from 4.93 to 7.99, the morphology was transformed from spherical micelles to wormlike micelles. Upon further increasing the pH to 12.02, the wormlike micelles gradually disappeared with the formation of vesicles. Thus, a morphology transition from micelles to vesicles can be triggered by varying the pH of CTAB/HB/OA solutions. This drastic variation in morphology behavior was attributed to the pH dependent ionization and formation of the anionic surfactant HB-OA-. Besides, over 3 cycles of morphological alternation among spherical micelles, wormlike micelles and vesicles of the CTAB/HB/OA solutions can be obtained by adjusting the pH.

Surfactant Aggregates Encapsulating and Modulating: An Effective Way to Generate Selective and Discriminative Fluorescent Sensors

The heterogeneous structure and dynamic balancing nature of surfactant aggregates make them attractive in developing fluorescent sensors. They can provide a number of advantages, e.g., enhanced fluorescence stability and quantum yield, detection capability in aqueous solutions, and easy operation. Thus, various strategies have been used to construct surfactant aggregate-based fluorescent sensors. Surfactant aggregates play various roles in different strategies and realize multiple sensing behaviors. Many new functions have been discovered for surfactant aggregates in constructing fluorescent sensors. In this feature article, we briefly summarize the development of surfactant aggregate-based fluorescent sensors and their applications in three different types of sensing: selective sensing, multiple analyte sensing, and cross-reactive sensing. For each type of sensing, the design strategies and the roles of surfactant aggregates are particularly introduced. An understanding of these aspects will help to expand the applications of surfactant assemblies in the sensing field.

Aggregation Behavior of Sodium Dioctyl Sulfosuccinate in Deep Eutectic Solvents and Their Mixtures with Water: An Account of Solvent's Polarity, Cohesiveness, and Solvent Structure

An anionic surfactant sodium dioctyl sulfosuccinate (AOT) aggregates in deep eutectic solvents (DESs) and their mixtures with water (up to 50% w/w) in a contrasting manner. Two DESs, a mixture of choline chloride + urea and choline chloride + ethylene glycol, commonly known as Reline and Ethaline, respectively, are used as solvents. Behavior of AOT at air-solution interface and aggregation in bulk is investigated using surface tension, conductivity, fluorescence, and dynamic light scattering measurements. The obtained results are correlated with structural aspects of solvent systems as well as with inherent properties of solvent such as Kamlet-Taft polarity parameters, degree of cohesiveness derived from Gordon parameter (G), and cohesive energy density. It is observed that the spontaneity of aggregation in neat DESs or DES-water mixtures follows a trend reflected by various solvent parameters. However, characteristic properties of aggregation in water does not fit into this trend, where critical aggregation concentration of AOT is found in between 30 and 50% (w/w) of respective DES-water mixtures. 1H NMR and 1H-1H 2D NOESY spectroscopy is employed to get insights into reason behind this anomalous behavior. It is observed that AOT forms self-assembled structures similar to that of other surfactants in neat DESs, whereas it undergoes nanosegregation in DESs-water mixtures. The present results are expected to be useful for colloidal aspects of DESs and their mixtures with water.

Self-Assembly of Amphiphiles into Vesicles and Fibrils: Investigation of Structure and Dynamics Using Spectroscopy and Microscopy Techniques

Amphiphiles are a class of molecules which are known to assemble into a variety of nanostructures. The understanding and applications of self-assembled systems are based on what has been learned from biology. Among the vast number of self-assemblies, in this article, we have described the formation, characterization, and dynamics of two important biologically inspired assemblies: vesicles and fibrils. Vesicles, which can be classified into several categories depending on the sizes and components, are of great interest due to their potential applications in drug delivery and as nanoscale reactors. The structure and dynamics of vesicles can also mimic the complex geometry of the cell membrane. On the other hand, the self-assembly of proteins, peptides, and even single amino acids leads to a number of degenerative disorders. Thus, a complete understanding of these self-assembled systems is necessary. In this article, we discuss recent work on vesicular aggregates composed of phospholipids, fatty acids, and ionic as well as nonionic surfactants and single amino acid-based fibrils such as phenylalanine and tyrosine. Beside the characterization, we also emphasize the excited-state dynamics inside the aggregates for a proper understanding of the organization, reactivity, and heterogeneity of the aggregates.

Surfactant and Cyclodextrin Induced Vesicle to Micelle to Vesicle Transformation in Aqueous Medium

The physicochemical behavior and characteristics of lipid vesicles and micelles in aqueous medium are greatly tuned by changing the ambient physical parameters, such as temperature, pH, and ionic strength. The process is also controlled by external additives and the nature of the surfactants. In this work, we have used water-soluble surfactant and cyclodextrin to transform lipid vesicles to micelles to vesicles without changing the physical ambience. In this regard, we have used a special pyrene-tagged guest compound that readily forms excimer in water and thus acts as a reporter for the process. Giant lipid vesicles (biological cell mimics) are disrupted by cationic surfactants to form mixed elongated micelles that transform to vesicles on applying a cyclodextrin host.

A pH-responsive wormlike micellar system of a noncovalent interaction-based surfactant with a tunable molecular structure

Responsive wormlike micelles are very useful in a number of applications, whereas it is still challenging to create dramatic viscosity changes in wormlike micellar systems. Here we developed a pH-responsive wormlike micellar system based on a noncovalent constructed surfactant, which is formed by the complexation of N-erucamidopropyl-N,N-dimethylamine (UC₂₂AMPM) and citric acid at the molar ratio of 3 : 1 (EACA). The phase behavior, aggregate microstructure and viscoelasticity of EACA solutions were investigated by macroscopic appearance observation, rheological and cryo-TEM measurements. It was found that the phase behavior of EACA solutions undergoes transition from transparent viscoelastic fluids to opalescent solutions and then phase separation with white floaters upon increasing the pH. Upon increasing the pH from 2.03 to 6.17, the viscosity of wormlike micelles in the transparent solutions continuously increased and reached ∼683 000 mPa s at pH 6.17. As the pH was adjusted to 7.31, the opalescent solution shows a water-like flowing behaviour and the η₀ rapidly declines to ∼1 mPa s. Thus, dramatic viscosity changes of about 6 magnitudes can be triggered by varying the pH values without any deterioration of the EACA system. This drastic variation in rheological behavior is attributed to the pH dependent interaction between UC₂₂AMPM and citric acid. Furthermore, the dependence on concentration and temperature of the rheological behavior of EACA solutions was also studied to assist in obtaining the desired pH-responsive viscosity changes.

5-Methyl Salicylic Acid-Induced Thermo Responsive Reversible Transition in Surface Active Ionic Liquid Assemblies: A Spectroscopic Approach

This article describes the formation of stable unilamellar vesicles involving surface active ionic liquid (SAIL), 1-hexadecyl-3-methylimidazolium chloride (C16mimCl), and 5-methyl salicylic acid (5mS). Turbidity, dynamic light scattering (DLS), transmission electron microscopy (TEM), and viscosity measurements suggest that C16mimCl containing micellar aggregates are transformed to elongated micelle and finally into vesicular aggregates with the addition of 5mS. Besides, we have also investigated the photophysical aspects of a hydrophobic (coumarin 153, C153) and a hydrophilic molecule (rhodamine 6G (R6G) perchlorate) during 5mS-induced micelle to vesicle transition. The rotational motion of C153 becomes slower, whereas faster motion is observed for R6G during micelle to vesicle transition. Moreover, the fluorescence correlation spectroscopy (FCS) measurements suggest that the translational diffusion of hydrophobic probe becomes slower in C16mimCl-5mS aggregates in comparison to C16mimCl micelle. However, a reverse trend in translational diffusion motion of hydrophilic molecule has been observed in C16mimCl-5mS aggregates. Moreover, we have also found that the C16mimCl-5mS containing vesicles are transformed into micelles upon enhanced temperature, and it is further confirmed by turbidity, DLS measurements that this transition is a reversible one. Finally, temperature-induced rotational motion of C153 and R6G has been monitored in C16mimCl-5mS aggregates to get a complete scenario regarding the temperature-induced vesicle to micelle transition.

Structural Transition of Cinnamate-Based Light-Responsive Ionic Liquids in Aqueous Solutions and Their Light-Tunable Rheological Properties

Light-responsive wormlike micelles have important applications in fields such as microfluids, photoswichable fluids, and rheology control. However, single-component light-responsive wormlike micelles formed only from a single tail surfactant have not been reported in literature. In this work, self-assembly behavior of 1-alkyl-3-methylimidazolium trans-ortho-methoxycinnamate [Cnmim][OMCA] (n = 8, 10, 12, 14, 16) ionic liquids in aqueous solutions is studied by UV-vis spectroscopy, viscosity, rheology, conductivity, and cryo-TEM measurements. It is found for the first time that, among the single tail ionic liquid surfactants studied, [C16mim][OMCA] can form wormlike micelles in aqueous solutions without any additives and light irradiation. Then these wormlike micelles are able to transform into cylindrical micelles under UV light irradiation, resulting in significantly tunable rheological properties of the solutions. The photoisomerization of anion of [C16mim][OMCA] from trans- to cis-isomer as well as the relative hydrophilicity and structural feature of the cis-isomer are suggested to be responsible for such transition.

The cholesterol aided micelle to vesicle transition of a cationic gemini surfactant (14-4-14) in aqueous medium

Cholesterol aided micelle to vesicle transition of cationic gemini surfactant (14-4-14) in solution has been investigated.

Self-Assembly and Rheological Properties of a Pseudogemini Surfactant Formed in a Salt-Free Catanionic Surfactant Mixture in Water

The surface and bulk properties of bola-type dicarboxylic acid (sebacic acid, SA) and zwitterionic surfactant tetradecyldimethylamine oxide (C14DMAO) mixtures in aqueous solutions were studied. Surface tension measurements indicate a pronounced synergistic effect between SA and C14DMAO. In bulk aqueous solutions, rich phase behavior was observed with a varied SA-to-C14DMAO ratio (ρ) and a total surfactant concentration. Typically at ρ = 0.5, a novel pseudogemini surfactant (C14-S-C14) forms, driven by electrostatic interaction and hydrogen bonding. The C14-S-C14/H2O system exhibits rich phase behavior induced by the transition of aggregates. With increasing concentration of C14-S-C14, one can observe a viscous L1 phase, an L1/Lα two-phase region where a birefringent Lα phase is on the top of an L1 phase, a single Lα phase, and finally a mixture of an Lα phase and a precipitate. Microstructures formed in the Lα phases were determined by freeze-fracture transmission electron microscopy (FF-TEM) and cryogenic-transmission electron microscopy (cryo-TEM) observations. Polymorphic aggregation behavior was observed with the formation of a variety of bilayer structures including unilamellar vesicles, onions, and open and hyperbranched bilayers. Rheological measurements showed that the Lα phases are viscoelastic and sensitive to temperature where a quick loss of viscoelasticity was observed at elevated temperature.

Unusual pH-regulated surface adsorption and aggregation behavior of a series of asymmetric gemini amino-acid surfactants

A new series of pH-regulated asymmetric amino-acid gemini surfactants N,N'-dialkyl-N,N'-diacetate ethylenediamine (Ace(m)-2-Ace(n)), differing by the asymmetric degree and length of the carbon tails (m = 8 and 10, n = 10, 12, 14, and 16), were synthesized in three steps. On the basis of pKa values obtained by pH titration, surface tension, fluorescence, dynamic light scattering (DLS), and transmission electron microscopy (TEM) measurements were performed to study the surface adsorption and aggregation properties in aqueous Ace(m)-2-Ace(n) solution. The new compounds have higher surface activity and better pH adaptability in comparison with that of symmetric gemini surfactants Ace(n)-2-Ace(n). The molecule behavior of Ace(m)-2-Ace(n) can be adjusted by either the hydrophobic group or the pH. With increasing alkyl chain length, the surface adsorption declines but its ability to form aggregates increases. We find that pH can promote the self-assembly transition of Ace(m)-2-Ace(n) from surfactant monomers to aggregates through protonation between H(+) and the tertiary nitrogen group. TEM data further confirm the pH-regulated molecular self-assembly process and the existence of vesicles at neutral or weak acidic pH. pH-recyclability is found to be reversible by pH-light transmittance recycle tests.

How does the surface charge of ionic surfactant and cholesterol forming vesicles control rotational and translational motion of rhodamine 6G perchlorate (R6G ClO₄)?

The rotational dynamics and translational diffusion of a hydrophilic organic molecule, rhodamine 6G perchlorate (R6G ClO4) in small unilamellar vesicles formed by two different ionic surfactants, cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS), with cholesterol have been investigated using fluorescence spectroscopic methods. Moreover, in this article the formation of vesicle using anionic surfactant, SDS at different cholesterol-to-surfactant molar ratio (expressed by Q value (Q = [cholesterol]/[surfactant])) has also been reported. Visual observation, dynamic light scattering (DLS) study, turbidity measurement, steady state fluorescence anisotropy (r0) measurement, and eventually microscopic images reveal the formation of small unilamellar vesicles in aqueous solution. Also, in this study, an attempt has been made to observe whether the cationic probe molecule, rhodamine 6G (R6G) experiences similar or different microenvironment in cholesterol-SDS and cholesterol-CTAB assemblies with increase in cholesterol concentration. The influence of cholesterol on rotational and translational diffusion of R6G molecules has been investigated by monitoring UV-vis absorption, fluorescence, time-resolved fluorescence anisotropy, and finally fluorescence correlation spectroscopy (FCS) measurements. In cholesterol-SDS assemblies, due to the strong electrostatic attractive interaction between the negatively charged surface of vesicle and cationic R6G molecules, the rotational and diffusion motion of R6G becomes slower. However, in cholesterol-CTAB aggregates, the enhanced hydrophobicity and electrostatic repulsion induces the migration of R6G from vesicle bilayer to aqueous phase. The experimental observations suggest that the surface charge of vesicles has a stronger influence than the hydrophobicity of the vesicle bilayer on the rotational and diffusion motion of R6G molecules.

Gemini surfactants from natural amino acids

In this review, we report the most important contributions in the structure, synthesis, physicochemical (surface adsorption, aggregation and phase behaviour) and biological properties (toxicity, antimicrobial activity and biodegradation) of Gemini natural amino acid-based surfactants, and some potential applications, with an emphasis on the use of these surfactants as non-viral delivery system agents. Gemini surfactants derived from basic (Arg, Lys), neutral (Ser, Ala, Sar), acid (Asp) and sulphur containing amino acids (Cys) as polar head groups, and Geminis with amino acids/peptides in the spacer chain are reviewed.

Spontaneous transition of micelle-vesicle-micelle in a mixture of cationic surfactant and anionic surfactant-like ionic liquid: a pure nonlipid small unilamellar vesicular template used for solvent and rotational relaxation study

The micelle-vesicle-micelle transition in aqueous mixtures of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and the anionic surfactant-like ionic liquid 1-butyl-3-methylimidazolium octyl sulfate, [C4mim][C8SO4] has been investigated by using dynamic light scattering (DLS), transmission electron microscopy (TEM), surface tension, conductivity, and fluorescence anisotropy at different volume fractions of surfactant. The surface tension value decreases sharply with increasing CTAB concentration up to ∼0.38 volume fraction and again increases up to ∼0.75 volume fraction of CTAB. Depending upon their relative amount, these surfactants either mixed together to form vesicles and/or micelles, or both of these structures were in equilibrium. Fluorescence anisotropy of 1,6-diphenyl-1,3,5-hexatriene (DPH), incorporated in this system at different composition of surfactant indicates the formation of micelle and vesicle structures. The apparent hydrodynamic diameter of these large multilamellar vesicles is about ∼200 nm-300 nm obtained by DLS measurement and finally confirmed by TEM micrographs. The large multilamellar vesicles are transformed into small unilamellar ones by sonication using a Lab-line instruments probe sonicator with a diameter of ∼90-125 nm. To investigate the heterogeneity, solvent, and rotational relaxation of coumarin-153 (C-153) have been investigated in these unilamellar vesicles by using picosecond time-resolved fluorescence spectroscopic technique. The solvation dynamics of C-153 in these vesicles is found to be biexponential with average time constant ∼580 ps. This indicates the slow relaxation of water molecules in the surfactant bilayer. In accordance with solvation dynamics, fluorescence anisotropy analysis of C-153 in unilamellar vesicles also indicates hindered rotation compared to bulk water.