Conformational properties of oxazole-amino acids: effect of the intramolecular N-H···N hydrogen bond

Insight into the Structure of Victorin, the Host-Selective Toxin from the Oat Pathogen Cochliobolus victoriae. Studies of the Unique Dehydroamino Acid β-Chlorodehydroalanine

Victorins, a family of peptide toxins, produced by the fungal pathogen Cochliobolus victoriae and responsible for disease of some oat varieties, contain a β-chlorodehydroalanine residue, ΔAla(βCl). To determine the conformational properties of this unique dehydroamino acid, a series of model compounds was studied using X-ray, NMR, and FT-IR methods, supported by theoretical calculations. The ΔAla(βCl) geometrical isomers differ in conformational profile. The isomer Z prefers the helical conformation α (φ, ψ = -61°, -24°), PPII type conformation β (φ, ψ = -47°, 136°), and semiextended conformation β2 (φ, ψ = -116°, 9°) in weakly and more polar solutions. The isomer E prefers mainly the extended conformation C5 (φ, ψ = -177°, 160°), but with an increase of the environment polarity also conformations β (φ, ψ = -44°, 132°) and α (φ, ψ = -53°, -39°). In the most stable conformations the N-H···Cl hydrogen bond (5^γ) occurs, created between the chlorine atom of the side chain and the N-H donor of the flanking amide group. The method of synthesis of the β-chlorodehydroalanine residue is proposed, by chlorination of dehydroalanine and then the photoisomerization from the isomer Z to E. The presented results indicate that the assignment of the geometrical isomer of the ΔAla(βCl) residue in naturally occurring victorins still remains an open question, despite being crucial for biological activity.

Ribosomal Synthesis of Peptides Bearing Noncanonical Backbone Structures via Chemical Posttranslational Modifications

Noncanonical peptide backbone structures, such as heterocycles and non-α-amino acids, are characteristic building blocks present in peptidic natural products. To achieve ribosomal synthesis of designer peptides bearing such noncanonical backbone structures, we have devised translation-compatible precursor residues and their chemical posttranslational modification processes. In this chapter, we describe the detailed procedures for the in vitro translation of peptides containing the precursor residues by means of genetic code reprogramming technology and posttranslational generation of objective noncanonical backbone structures.

Imidazole-amino acids. Conformational switch under tautomer and pH change

Replacement of the main chain peptide bond by imidazole ring seems to be a promising tool for the peptide-based drug design, due to the specific prototropic tautomeric as well as amphoteric properties. In this study, we present that both tautomer and pH change can cause a conformational switch of the studied residues of alanine (1-4) and dehydroalanine (5-8) with the C-terminal peptide group replaced by imidazole. The DFT methods are applied and an environment of increasing polarity is simulated. The conformational maps (Ramachandram diagrams) are presented and the stability of possible conformations is discussed. The neutral forms, tautomers τ (1) and π (2), adapt the conformations αRτ (φ, ψ = - 75°, - 114°) and C7eq (φ, ψ = - 75°, 66°), respectively. Their torsion angles ψ differ by about 180°, which results in a considerable impact on the peptide chain conformation. The cation form (3) adapts both these conformations, whereas the anion analogue (4) prefers the conformations C5 (φ, ψ = - 165°, - 178°) and β2 (φ, ψ ~ - 165°, - 3°). Dehydroamino acid analogues, the tautomers τ (5) and π (6) as well as the anion form (8), have a strong tendency toward the conformations β2 (φ, ψ = - 179°, 0°) and C5 (φ, ψ = - 180°, 180°). The preferences of the protonated imidazolium form (7) depend on the environment. The imidazole ring, acting as a donor or acceptor of the hydrogen bonds created within the studied residues, has a profound effect on the type of conformation.

Direct Spectroscopic Evidence for Charge-Assisted Hydrogen-Bond Formation between Ionizable Organic Chemicals and Carbonaceous Materials

The direct evidence for the formation of charge-assisted hydrogen bond (CAHB) between the charged groups of ionizable organic chemicals (IOCs) and carbonaceous materials with similar proton affinity remains elusive. We therefore selected three pharmaceutical contaminants (PCs) as representative IOCs to provide the direct evidence of CAHB formation between IOCs and functionalized carbon nanotubes (CNTs) and its intensity/contribution to PC sorption on CNTs by NMR, FTIR, and DFT analyses. Sorption of PCs on functionalized CNTs resulted in the FTIR characteristic peak that appeared at a higher frequency (3787 cm^-1) and the ¹H NMR characteristic peak that emerged at an extremely low-field region (<18.0 ppm), which can be used as the direct spectroscopic evidence for CAHB formation. Both homonuclear CAHB (HM-CAHB, e.g., [O-H···O]^-) and heteronuclear CAHB (HT-CAHB, e.g., [N⁺-H···O^-]/[O-H···N]⁺) exhibited a much higher sorption energy (|E_ads| ≥ 56.24 kJ/mol) than ordinary hydrogen bond (OHB, |E_ads| ≤ 6.136 kJ/mol), leading to a greater sorption contribution (HM-/HT-CAHB ≥ 42.3%, OHB ≤ 36.5%) and irreversibility (hysteresis index: HM-/HT-CAHB ≥ 1.69, OHB ≤ 0.43) of PCs on CNTs. This work presents the direct evidence for CAHB formation between IOCs and CNTs, which is significant for understanding and predicting the environmental fate and risk of IOCs, thus providing new insights for controlling their pollution using specifically designed carbonaceous materials.

Synthesis of Tetrapeptides Containing Dehydroalanine, Dehydrophenylalanine and Oxazole as Building Blocks for Construction of Foldamers and Bioinspired Catalysts

The incorporation of dehydroamino acid or fragments of oxazole into peptide chain is accompanied by a distorted three-dimensional structure and additionally enables the introduction of non-typical side-chain substituents. Thus, such compounds could be building blocks for obtaining novel foldamers and/or artificial enzymes (artzymes). In this paper, effective synthetic procedures leading to such building blocks-tetrapeptides containing glycyldehydroalanine, glycyldehydrophenylalanine, and glycyloxazole subunits-are described. Peptides containing serine were used as substrates for their conversion into peptides containing dehydroalanine and aminomethyloxazole-4-carboxylic acid while considering possible requirements for the introduction of these fragments into long-chain peptides at the last steps of synthesis.

Thiazole-amino acids: influence of thiazole ring on conformational properties of amino acid residues

Post-translational modified thiazole-amino acid (Xaa-Tzl) residues have been found in macrocyclic peptides (e.g., thiopeptides and cyanobactins), which mostly inhibit protein synthesis in Gram + bacteria. Conformational study of the series of model compounds containing this structural motif with alanine, dehydroalanine, dehydrobutyrine and dehydrophenylalanine were performed using DFT method in various environments. The solid-state crystal structure conformations of thiazole-amino acid residues retrieved from the Cambridge Structural Database were also analysed. The studied structural units tend to adopt the unique semi-extended β2 conformation; which is stabilised mainly by N-H⋯NTzl hydrogen bond, and for dehydroamino acids also by π-electron conjugation. The conformational preferences of amino acids with a thiazole ring were compared with oxazole analogues and the role of the sulfur atom in stabilising the conformations of studied peptides was discussed.

Tritylamine as an Ammonia Surrogate in the Ugi Reaction Provides Access to Unprecedented 5-Sulfamido Oxazoles Using Burgess-type Reagents

Starting from a wide range of α-acylamino amide substructures synthesized using tritylamine as an ammonia surrogate in the Ugi reaction, Burgess-type reagents enable cyclodehydration and afford unprecedented oxazole scaffolds with four points of diversity, including a sulfamide moiety in the 5-position. The synthetic procedure employs readily available starting materials and proceeds smoothly under mild reaction conditions with good tolerance for a variety of functional groups, coming to fill a gap in the field of oxazole compounds.

Posttranslational chemical installation of azoles into translated peptides

Azoles are five-membered heterocycles often found in the backbones of peptidic natural products and synthetic peptidomimetics. Here, we report a method of ribosomal synthesis of azole-containing peptides involving specific ribosomal incorporation of a bromovinylglycine derivative into the nascent peptide chain and its chemoselective conversion to a unique azole structure. The chemoselective conversion was achieved by posttranslational dehydrobromination of the bromovinyl group and isomerization in aqueous media under fairly mild conditions. This method enables us to install exotic azole groups, oxazole and thiazole, at designated positions in the peptide chain with both linear and macrocyclic scaffolds and thereby expand the repertoire of building blocks in the mRNA-templated synthesis of designer peptides.

Azoles are five-membered heterocycles found in peptidic natural products and synthetic peptiodomimetics. Here the authors demonstrate a posttranslational chemical modification method for in vitro ribosomal synthesis of peptides with exotic azole groups at specific positions.

Unraveling the protonation site of oxazole and solvation with hydrophobic ligands by infrared photodissociation spectroscopy

Infrared spectroscopy reveals exclusive N-protonation of the oxazole ring and bifurcated or linear hydrogen bonding with hydrophobic N₂and Ar ligands.

Conformational preferences and synthesis of isomers Z and E of oxazole-dehydrophenylalanine

Dehydrophenylalanine, ΔPhe, is the most commonly studied α,β-dehydroamino acid. In nature, further modifications of the α,β-dehydroamino acids were found, for example, replacement of the C-terminal amide group by oxazole ring. The conformational properties of oxazole-dehydrophenylalanine residue (ΔPhe-Ozl), both isomers Z and E, were investigated. To determine all possible conformations, theoretical calculations were performed using Ac-(Z/E)-ΔPhe-Ozl(4-Me) model compounds at M06-2X/6-31++G(d,p) level of theory. Ac-(Z/E)-ΔPhe-Ozl-4-COOEt compounds were synthesized and the conformational preferences of each isomer, Z and E, were investigated using FTIR and NMR-NOE in solutions of increasing polarity (CHCl3 , DMSO-d6). The solid-state low-temperature structures of Ac-(Z)-ΔPhe-Ozl-4-COOEt and its intermediate analog Ac-(Z)-ΔPhe-Ozn(4-OH)-4-COOEt were also determined. In a weakly polar environment, the ΔPhe-Ozl residue has a tendency to adopt the conformation β2 with the calculated φ and ψ angles of -127° and 0° for the isomer Z and -170° and 26° for the isomer E. The increase of environment polarity favors the helical conformation α and the beta-turn like conformation β, but the conformation β2 seems to be still accessible. The (E)-ΔPhe-Ozl residue can be obtained from the isomer Z in photoisomerization reaction. However, hydroxyl-oxazoline-dehydrophenylalanine ΔPhe-Ozn(4-OH) decomposes in such conditions. Alternatively, (E)-ΔPhe-NH2 can be applied as a substrate in the Hantzsch reaction. © 2016 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 106: 283-294, 2016.

A base promoted multigram synthesis of aminoisoxazoles: valuable building blocks for drug discovery and peptidomimetics

An easy access to a large panel of aminoisoxazoles starting from commonly available amino acids.