Charged gold nanoparticles in non-polar solvents: 10-min synthesis and 2D self-assembly

Investigation of interactions between biological thiols and gold nanoparticles by capillary electrophoresis with laser-induced fluorescence

Biological thiols spontaneously form a stable Au-S dative bond with gold nanoparticles (AuNP) that might be used for their selective extraction and enrichment in biological samples. In this work, interactions of selected biological thiols (glutathione, cysteine, homocysteine [Hcys], cysteamine [CA], and N-acetylcysteine) with AuNP stabilized by different capping agents (citrate, Tween 20, Brij 35, CTAB, SDS) were investigated by UV-Vis spectroscopy and capillary electrophoresis with laser-induced fluorescence. Spectrophotometric measurements showed aggregation of Hcys and CA with AuNP. In contrast, it was confirmed by CE-LIF that biological thiols were adsorbed to all types of AuNP. Citrate-capped AuNP were selected for AuNP-based extraction of biological thiols from exhaled breath condensate (EBC). Dithiothreitol was utilized for desorption of biological thiols from the AuNP surface, which was followed by derivatization with eosin-5-maleimide and CE-LIF analysis. AuNP-based extraction increased the sensitivity of CE-LIF analysis; however, further optimization of methodology is necessary for accurate quantification of biological thiols in EBC.

Stimuli-responsive nanoparticle self-assembly at complex fluid interfaces: a new insight into dynamic surface chemistry

The self-assembly of core/shell nanoparticles (NPs) at fluid interfaces is a rapidly evolving area with tremendous potential in various fields, including biomedicine, display devices, catalysts, and sensors. This review provides an in-depth exploration of the current state-of-the-art in the programmed design of stimuli-responsive NP assemblies, with a specific focus on inorganic core/organic shell NPs below 100 nm for their responsive adsorption properties at fluid and polymer interfaces. The interface properties, such as ligands, charge, and surface chemistry, play a significant role in dictating the forces and energies governing both NP-NP and NP-hosting matrix interactions. We highlight the fundamental principles governing the reversible surface chemistry of NPs and present detailed experimental examples in the following three key aspects of stimuli-responsive NP assembly: (i) stimuli-driven assembly of NPs at the air/liquid interface, (ii) reversible NP assembly at the liquid/liquid interface, including films and Pickering emulsions, and (iii) hybrid NP assemblies at the polymer/polymer and polymer/water interfaces that exhibit stimuli-responsive behaviors. Finally, we address current challenges in existing approaches and offer a new perspective on the advances in this field.

Machine-learning assisted multicolor platform for multiplex detection of antibiotics in environmental water samples

Antibiotic (AB) resistance is one of daunting challenges of our time, attributed to overuse of ABs and usage of AB-contaminated food resources. Due to their detrimental impact on human health, development of visual detection methods for multiplex sensing of ABs is a top priority. In present study, a colorimetric sensor array consisting of two types of gold nanoparticles (AuNPs) were designed for identification and determination of ABs. Design principle of the probe was based on aggregation of AuNPs in the presence of ABs at different buffer conditions. The utilization of machine learning algorithms in this design enables classification and quantification of ABs in various samples. The response profile of the array was analyzed using linear discriminant analysis algorithm for classification of ABs. This colorimetric sensor array is capable of accurate distinguishing between individual ABs and their combinations. Partial least squares regression was also applied for quantitation purposes. The obtained analytical figures of merit demonstrated the potential applicability of the developed sensor array in multiplex detection of ABs. The response profiles of the array were linearly correlated to the concentrations of ABs in a wide range of concentration with limit of detections of 0.05, 0.03, 0.04, 0.01, 0.06, 0.05 and 0.04 μg.mL-1 for azithromycin, amoxicillin, ciprofloxacin, clindamycin, cefixime, doxycycline and metronidazole respectively. The practical applicability of this method was further investigated by analysis of mixture samples of ABs and determination of ABs in river and underground water with successful verification.

Microwave Synthesis of Au Nanoparticles in the Presence of Tetrahydrothiophenocucurbituril

The preparation of gold nanoparticles (AuNPs) from tetrachloroauric acid in the presence of tetrahydrothiophenocucurbit[n]uril (THTmQ[n]) has been effectively achieved in a microwave reactor. The reaction was performed in the presence of an excess of the tetrahydrothiopheno function in a partial reductant role, while the remainder formed AuNP-THTmQ[n] conjugates after the reduction was completed with formic acid. An affinity for the AuNPs by the THTmQ[n] was observed in the purification of the NPs via centrifugation, removal of the supernatant and resuspension of the conjugate.

Enhancement of cellular uptake by increasing the number of encapsulated gold nanoparticles in polymeric micelles

We apply a combination of polycaprolactone (PCL)-thiol ligand functionalization with flow-controlled microfluidic block copolymer self-assembly to produce biocompatible gold nanoparticle (GNP)-loaded micellar polymer nanoparticles (GNP-PNPs) in which GNPs are encapsulated within PCL cores surrounded by an external layer of poly(ethylene glycol) (PEG). By varying both the relative amount of block copolymer and the microfluidic flow rate, a series of GNP-PNPs are produced in which the mean number of GNPs per PNP in the < 50-nm fraction (Zave,d< 50 nm) varies between 0.1 and 1.9 while the external PEG surface is constant. Zave,d< 50 nm values are determined by statistical analysis of TEM images and compared with the results of cell uptake experiments on MDA-MB-231 cancer cells. For Zave,d< 50 nm ≤ 1 (including a control sample of individual GNPs also with a PEG surface layer), cell uptake is relatively constant, but increases sharply for Zave,d< 50 nm > 1, with a factor of 7 enhancement as Zave,d< 50 nm increases from 1 to ∼2. Enabled by the shear processing control provided by the microfluidic chip, these results provide the first evidence that cellular uptake can be enhanced specifically by increasing the number of GNPs per vector, with other parameters, including polymeric material, internal structure, and external surface chemistry, held constant. They also demonstrate a versatile platform for packaging GNPs in biocompatible polymeric carriers with flow-controlled formulation optimization for various therapeutic and diagnostic applications.

Electric Field-Driven Self-Assembly of Gold Nanoparticle Monolayers on Silicon Substrates

Nanoparticles (NPs) bridge the gap between bulk materials and their equivalent molecular/atomic counterparts. The physical, optical, and electronic properties of individual NPs alter with the changes in their surrounding environment at the nanoscale. Similarly, the characteristics of thin films of NPs depend on their lateral and volumetric densities. Thus, attaining single monolayers of these NPs would play a vital role in the improved characteristics of semiconductor devices such as nanosensors, field effect transistors, and energy harvesting devices. Developing nanosensors, for instance, requires precise methods to fabricate a monolayer of NPs on selected substrates for sensing and other applications. Herein, we developed a physical fabrication method to form a monolayer of NPs on a planar silicon surface by creating an electric field of intensity 5.71 × 104 V/m between parallel plates of a capacitor, by applying a DC voltage. The physics of monolayer formation caused by an externally applied electric field on the gold NPs (Au-NPs) of size 20 nm in diameter and possesses a zeta potential of -250 to -290 mV, is further analyzed with the help of the finite element simulation. The enhanced electric field, in the order of 108 V/m, around the Au-NPs indicates a high surface charge density on the NPs, which results in a high electric force per unit area that guides them to settle uniformly on the surface of the silicon substrate.

Controlling Atomic-Scale Restructuring and Cleaning of Gold Nanogap Multilayers for Surface-Enhanced Raman Scattering Sensing

We demonstrate the reliable creation of multiple layers of Au nanoparticles in random close-packed arrays with sub-nm gaps as a sensitive surface-enhanced Raman scattering substrate. Using oxygen plasma etching, all the original molecules creating the nanogaps can be removed and replaced with scaffolding ligands that deliver extremely consistent gap sizes below 1 nm. This allows precision tailoring of the chemical environment of the nanogaps which is crucial for practical Raman sensing applications. Because the resulting aggregate layers are easily accessible from opposite sides by fluids and by light, high-performance fluidic sensing cells are enabled. The ability to cyclically clean off analytes and reuse these films is shown, exemplified by sensing of toluene, volatile organic compounds, and paracetamol, among others.

Green Approach for the Simultaneous Synthesis and Separation of Gold Nanoparticles

Gold nanoparticles (AuNPs) have diagnostic and therapeutic applications as they are biocompatible and can be surface-functionalized. The use of organic solvents in the synthesis of AuNPs hampers their applications in the medicinal field. The large-scale production of nanoparticles requires their simultaneous synthesis and separation. Self-assembly of nanoparticles at the fluid-fluid interface facilitates their separation from the bulk and eliminates a downstream processing step. In this work, we exploit this in an aqueous two-phase system (ATPS) to synthesize and separate stable AuNPs. The ATPS was based on polyethylene glycol (PEG) and trisodium citrate dihydrate (citrate) as both these compounds can reduce Au ions. After the synthesis of nanoparticles, using one of the solutes, a complementary solution containing the other solute is added to form a two-phase system to facilitate self-assembly at the interface. The nanoparticles synthesized in different phases are characterized using UV-visible spectroscopy, scanning electron microscopy, and transmission electron microscopy. The AuNPs synthesized using the citrate solution are found to be unstable. Particles synthesized using the ATPS with PEG-600 are trapped at the interface while those using PEG-6000 remain in the bulk. Continuous synthesis and separation of nanoparticles in slug flow in a millichannel are demonstrated as a first step for large-scale controlled synthesis.

A Review on Self-Assembly of Colloidal Nanoparticles into Clusters, Patterns, and Films: Emerging Synthesis Techniques and Applications

The colloidal synthesis of functional nanoparticles has gained tremendous scientific attention in the last decades. In parallel to these advancements, another rapidly growing area is the self-assembly or self-organization of these colloidal nanoparticles. First, the organization of nanoparticles into ordered structures is important for obtaining functional interfaces that extend or even amplify the intrinsic properties of the constituting nanoparticles at a larger scale. The synthesis of large-scale interfaces using complex or intricately designed nanostructures as building blocks, requires highly controllable self-assembly techniques down to the nanoscale. In certain cases, for example, when dealing with plasmonic nanoparticles, the assembly of the nanoparticles further enhances their properties by coupling phenomena. In other cases, the process of self-assembly itself is useful in the final application such as in sensing and drug delivery, amongst others. In view of the growing importance of this field, this review provides a comprehensive overview of the recent developments in the field of nanoparticle self-assembly and their applications. For clarity, the self-assembled nanostructures are classified into two broad categories: finite clusters/patterns, and infinite films. Different state-of-the-art techniques to obtain these nanostructures are discussed in detail, before discussing the applications where the self-assembly significantly enhances the performance of the process.

Recent Trends in Lateral Flow Immunoassays with Optical Nanoparticles

Rapid, accurate, and convenient diagnosis is essential for effective disease management. Various detection methods, such as enzyme-linked immunosorbent assay, have been extensively used, with lateral flow immunoassay (LFIA) recently emerging as a major diagnostic tool. Nanoparticles (NPs) with characteristic optical properties are used as probes for LFIA, and researchers have presented various types of optical NPs with modified optical properties. Herein, we review the literature on LFIA with optical NPs for the detection of specific targets in the context of diagnostics.

Gold-oxoborate nanocomposite-coated orthodontic brackets gain antibacterial properties while remaining safe for eukaryotic cells

The study's main objective is to limit bacterial biofilm formation on fixed orthodontic appliances. Bacterial biofilm formation on such devices (e.g., brackets) causes enamel demineralization, referred to as white spot lesions (WSL). WSL is significant health, social and economic problem. We provide a nanotechnology-based solution utilizing a nanocomposite of gold nanoparticles embedded in a polyoxoborate matrix (BOA: B-boron, O-oxygen, A-gold, Latin aurum). The nanocomposite is fully inorganic, and the coating protocol is straightforward, effective, and ecologically friendly (low waste and water-based). Prepared coatings are mechanically stable against brushing with a toothbrush (up to 100 min of brushing). Bacteria adhesion and antibacterial properties are tested against Streptococcus mutans-common bacteria in the oral cavity. BOA reduces the adhesion of bacteria by around 78%, that is, from around 7.99 × 10⁵  ± 1.33 × 10⁵  CFU per bracket to 1.69 × 10⁵  ± 3.07 × 10⁴  CFU per bracket of S. mutans detached from unmodified and modified brackets, respectively. Modified fixed orthodontic brackets remain safe for eukaryotic cells and meet ISO 10993-5:2009 requirements for medical devices. The gathered data show that BOA deposited on orthodontic appliances provides a viable preventive measure against bacteria colonization, which presents frequent and significant complications of orthodontic treatment.

Hybrid gold-silica nanoparticles for plasmonic applications: A comparison study of synthesis methods for increasing gold coverage

The current work focuses on the synthesis of hybrid nanoparticles (NPs) made of a silica core (Si NPs) coated with discrete gold nanoparticles (Au NPs), which exhibit localized surface plasmon resonance (LSPR) properties. This plasmonic effect is directly related to the nanoparticles size and arrangement. In this paper, we explore a wide range of size for the silica cores (80, 150, 400, and 600 nm) and for the gold NPs (8, 10, and 30 nm). Some rational comparison between different functionalization techniques and different synthesis methods for the Au NPs are proposed, related to the optical properties and colloidal stability in time. An optimized, robust and reliable synthesis route is established, which improves the gold density and homogeneity. The performances of these hybrid nanoparticles are evaluated in order to be used in the shape of a dense layer for pollutant detection in gas or liquids, and find numerous applications as a cheap and new optical device.

Properties, Applications and Toxicities of Organotrialkoxysilane-Derived Functional Metal Nanoparticles and Their Multimetallic Analogues

Sol-gel chemistry offers a very unique tool for nanoscale mastering of material preparation from metal alkoxides [...].

Machine-learning assisted multiplex detection of catecholamine neurotransmitters with a colorimetric sensor array

Catecholamine neurotransmitters (CNs), such as dopamine (DA), epinephrine (EP), norepinephrine (NEP), and levodopa (LD), are recognized as the primary biomarkers of a variety of neurological illnesses. Therefore, simultaneous monitoring of these biomarkers is highly recommended for clinical diagnosis and treatment. In this study, a high-performance colorimetric artificial tongue has been proposed for the multiplex detection of CNs. Different aggregation behaviors of gold nanoparticles in the presence of CNs under various buffering conditions generate unique fingerprint response patterns. Under various buffering conditions, the distinct acidity constants of CNs, and consequently their predominant species at a given pH, drive the aggregation of gold nanoparticles (AuNPs). The utilization of machine learning algorithms in this design enables classification and quantification of CNs in various samples. The response profile of the array was analyzed using the linear discriminant analysis algorithm for classification of CNs. This colorimetric sensor array is capable of accurately distinguishing between individual neurotransmitters and their combinations. Partial least squares regression was also applied for quantitation purposes. The obtained analytical figures of merit (FOMs) and linear ranges of 0.6-9 μM (R² = 0.99) for DA, 0.1-10 μM (R² = 0.99) for EP, 0.1-9 μM (R² = 0.99) for NEP and 1-70 μM (R² = 0.99) for LD demonstrated the potential applicability of the developed sensor array in precise and accurate determination of CNs. Finally, the feasibility of the array was validated in human urine samples as a complex biological fluid with LODs of 0.3, 0.5, 0.2, and 1.9 μM for DA, EP, NEP, and LD, respectively.

Use of metal nanoparticles for preconcentration and analysis of biological thiols

Metal nanoparticles (NPs) exhibit several unique physicochemical properties, including redox activity, surface plasmon resonance, ability to quench fluorescence, biocompatibility, or a high surface-to-volume ratio. They are being increasingly used in analysis and preconcentration of thiol containing compounds, because they are able to spontaneously form a stable Au/Ag/Cu-S dative bond. They thus find wide application in environmental and particularly in medical science, especially in the analysis of biological thiols, the endogenous compounds that play a significant role in many biological systems. In this review article, we provide an overview of various types of NPs that have been applied in analysis and preconcentration of biological thiols, mainly in human biological fluids. We first discuss shortly the types of NPs and their synthesis, properties, and their ability to interact with thiol compounds. Then we outline the sample preconcentration and analysis methods that were used for this purpose with special emphasis on optical, electrochemical, and separation techniques.

Synthesis of novel hybrid mesoporous gold iron oxide nanoconstructs for enhanced catalytic reduction and remediation of toxic organic pollutants

The development of highly efficient, rapid, and recyclable nanocatalysts for effective elimination of toxic environmental contaminants remains a high priority in various industrial applications. Herein, we report the preparation of hybrid mesoporous gold-iron oxide nanoparticles (Au-IO NPs) via the nanocasting "inverse hard-templated replication" approach. Dispersed Au NPs were anchored on amine-functionalized iron oxide incorporated APMS (IO@APMS-amine), followed by etching of the silica template to afford hybrid mesoporous Au-IO NPs. The obtained nanoconstructs were fully characterized using electron microscopy, N₂ physisorption, and various spectroscopic techniques. Owing to their magnetic properties, high surface areas, large pore volumes, and mesoporous nature (S _BET = 124 m² g^-1, V _pore = 0.33 cm³ g^-1, and d _pore = 4.5 nm), the resulting Au-IO mesostructures were employed for catalytic reduction of nitroarenes (i.e. nitrophenol and nitroaniline), two of the most common toxic organic pollutants. It was found that these Au-IO NPs act as highly efficient nanocatalysts showing exceptional stabilities (>3 months), enhanced catalytic efficiencies in very short times (∼100% conversions within only 25-60 s), and excellent recyclabilities (up to 8 cycles). The kinetic pseudo-first-order apparent reaction rate constants (k _app) were calculated to be equal to 8.8 × 10^-3 and 23.5 × 10^-3 s^-1 for 2-nitrophenol and 2-nitroaniline reduction, respectively. To our knowledge, this is considered one of the best and fastest Au-based nanocatalysts reported for the catalytic reduction of nitroarenes, promoted mainly by the synergistic cooperation of their high surface area, large pore volume, mesoporous nature, and enhanced Au-NP dispersions. The unique mesoporous hybrid Au-IO nanoconstructs synthesized here make them novel, stable, and approachable nanocatalyst platform for various catalytic industrial processes.

Micro-patterns of gold nanoparticles assembled by photovoltaic optoelectronic tweezers: application to plasmonic fluorescence enhancement

Noble metal nanostructures are well-known for their ability to increase the efficiency of different optical or physical phenomena due to their plasmonic behavior. This work presents a simple strategy to obtain Au plasmonic patterns by optically induced nanoparticle assembly and its application as fluorescence enhancement platforms. This strategy is based on the so-called photovoltaic optoelectronic tweezers (PVOT) being the first time they are used for fabricating Au periodic micro-patterns. Fringe patterns with a sub-structure of aggregates, assembled from individual spherical nanoparticles of 3.5 or 170 nm diameters, are successfully obtained. The spatial distribution of the aggregates is controlled with micrometric accuracy and the patterns can be arranged over large-scale active areas (tens of mm²). The outcome for the ultra-small (3.5 nm) particles is particularly relevant because this diameter is the smallest one manipulated by PVOT so far. Testing experiments of plasmonic fluorescence enhancement show that the 170-nm patterns present a much better plasmonic behavior. For the 170-nm platform they reveal a 10-fold enhancement factor in the fluorescence of Rhodamine-B dye molecules and a 3-fold one for tagged DNA biomolecules. Hence, the results suggest that these latter plasmonic platforms are good candidates for efficient bio-imaging and biosensing techniques, among other applications.

Effect of the Dispersion Process and Nanoparticle Quality on Chemical Sensing Performance

On the surface of chemiresistive films, the scarce heterogeneity of a molecularly capped gold nanoparticle (MCGNP) colloidal dispersion and uneven evaporation of the MCGNP-contained drying drop applied to this surface are among the main factors that affect reproducibility, and repeatable fabrication of thin films of MCGNPs. This article shows that an increase in reproducibility and repeatability is possible using a dispersant and a surfactant during the deposition and annealing processes of the MCGNP. The results show higher sensitivity and accuracy of the sensors for the detection of volatile organic compounds in air and an increased limit of detection. These simple and practical additions might serve as a launching pad for fabrication of other types of thin-film-based sensors.

Heterostructures Based on Cobalt Phthalocyanine Films Decorated with Gold Nanoparticles for the Detection of Low Concentrations of Ammonia and Nitric Oxide

This work is aimed at the development of new heterostructures based on cobalt phthalocyanines (CoPc) and gold nanoparticles (AuNPs), and the evaluation of the prospects of their use to determine low concentrations of ammonia and nitric oxide. For this purpose, CoPc films were decorated with AuNPs by gas-phase methods (MOCVD and PVD) and drop-casting (DC), and their chemiresistive sensor response to low concentrations of NO (10–50 ppb) and NH₃ (1–10 ppm) was investigated. A comparative analysis of the characteristics of heterostructures depending on the preparation methods was carried out. The composition, structure, and morphology of the resulting hybrid films were studied by X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma atomic emission (ICP-AES) spectroscopy, as well as electron microscopy methods to discuss the effect of these parameters on the sensor response of hybrid films to ammonia and nitric oxide. It was shown that regardless of the fabrication method, the response of Au/CoPc heterostructures to NH₃ and NO gases increased with an increase in the concentration of gold. The sensor response of Au/CoPc heterostructures to NH₃ increased 2–3.3 times compared to CoPc film, whereas in the case of NO it increased up to 16 times. The detection limits of the Au/CoPc heterostructure with a gold content of ca. 2.1 µg/cm² for NH₃ and NO were 0.1 ppm and 4 ppb, respectively. It was shown that Au/CoPc heterostructures can be used for the detection of NH₃ in a gas mixture simulating exhaled air (N₂—74%, O₂—16%, H₂O—6%, CO₂—4%).

Methods for Enhanced Fluorescence Detection of Proteins by using Entrapped Gold Nanoparticles in Membranes

Measuring protein levels from biofluids can provide important insight into human health and disease during various physiological and pathological conditions. In many situations, sensitive methods are required for protein quantification because at the early stages of many diseases, proteins in biofluids are present at very low concentrations. Here, a new and simple method is presented in the form of Basic and Alternative Protocols for an immunoassay performed on a nitrocellulose membrane, followed by the addition of gold nanoparticles prior to measuring fluorescence with a microscope. The assay protocol was optimized to achieve 3D metal-enhanced fluorescence (MEF) with increased antibody-binding capacity and enhanced fluorescence signals, improving assay sensitivity. Using different concentrations of spiked fluorescently labeled IgGs in pooled normal human plasma, a lower detection limit of 29 ng/ml was achieved. This limit of detection was found to be a thousand-fold lower than the conventional 2D assay and one order of magnitude lower than when the assay was performed on a 3D membrane without MEF. This method provides an easy way to improve immunoassay sensitivity, and it can be simply transferred to other labs. It also can extend to fluorescence detection of other analytes beyond proteins. © 2022 Wiley Periodicals LLC. Basic Protocol: Assay in nitrocellulose membrane with entrapped AuNPs using commercially available AuNPs Alternative Protocol: Assay in nitrocellulose membrane with entrapped AuNPs using lab-made AuNPs.

Recent Advances in Metal/Alloy Nano Coatings for Carbon Nanotubes Based on Electroless Plating

A large number of researches on the electroless plating of carbon nanotubes and their applications after plating have emerged, which has attracted more and more attention. In this review article, the existing electroless plating methods for carbon nanotubes were briefly summarized, and the surface coatings were listed and analyzed in detail. At last, the related applications after electroless metal/alloy coatings of carbon nanotubes were discussed in detail. This study aims to provide a reference for the research and improvement of different electroless metals/alloys coatings of carbon nanotubes. After a clear understanding of the electroless metal/alloy coatings of carbon nanotubes, the appropriate coating can be selected according to the actual situation, so that the carbon nanotubes after plating can be used as reinforcement and modification materials for better satisfaction of the needs, and the application of plated carbon nanotubes has reference significance in more fields.

Electrodeformation of White Blood Cells Enriched with Gold Nanoparticles

The elasticity of white blood cells (WBCs) provides valuable insight into the condition of the cells themselves, the presence of some diseases, as well as immune system activity. In this work, we describe a novel process of refined control of WBCs’ elasticity through a combined use of gold nanoparticles (AuNPs) and the microelectrode array device. The capture and controlled deformation of gold nanoparticles enriched white blood cells in vitro are demonstrated and quantified. Gold nanoparticles enhance the effect of electrically induced deformation and make the DEP-related processes more controllable.

Gold-Polymer Nanocomposites for Future Therapeutic and Tissue Engineering Applications

Gold nanoparticles (AuNPs) have been extensively investigated for their use in various biomedical applications. Owing to their biocompatibility, simple surface modifications, and electrical and unique optical properties, AuNPs are considered promising nanomaterials for use in in vitro disease diagnosis, in vivo imaging, drug delivery, and tissue engineering applications. The functionality of AuNPs may be further expanded by producing hybrid nanocomposites with polymers that provide additional functions, responsiveness, and improved biocompatibility. Polymers may deliver large quantities of drugs or genes in therapeutic applications. A polymer alters the surface charges of AuNPs to improve or modulate cellular uptake efficiency and their biodistribution in the body. Furthermore, designing the functionality of nanocomposites to respond to an endo- or exogenous stimulus, such as pH, enzymes, or light, may facilitate the development of novel therapeutic applications. In this review, we focus on the recent progress in the use of AuNPs and Au-polymer nanocomposites in therapeutic applications such as drug or gene delivery, photothermal therapy, and tissue engineering.

Surface functionalization of nanomaterials by aryl diazonium salts for biomedical sciences

Nanoparticles (NPs) can be prepared by simple reactions and methods from a number of materials. Their small size opens up a number of applications in different fields, among which biomedicine, including: i) drug delivery, ii) biosensors, iii) bioimaging, iv) antibacterial activity. To be able to perform such tasks, NPs must be modified with a variety of functional molecules, such as drugs, targeting groups, chemical tags or antibacterial agents, and must also be prevented from aggregation. The attachment must be stable to resist during the transportation to the targeted location. Diazonium salts, which have been widely used for coupling applications and surface modification, fulfil such criteria. Moreover, they are simple to prepare and can be easily substituted with a large number of organic groups. This review describes the use of these compounds in nanomedicine with a focus on the construction of nanohybrids derived from metal, oxide and carbon-based NPs as well as viruses.

Gold-Polyoxoborates Nanocomposite Prohibits Adsorption of Bacteriophages on Inner Surfaces of Polypropylene Labware and Protects Samples from Bacterial and Yeast Infections

Bacteriophages (phages) are a specific type of viruses that infect bacteria. Because of growing antibiotic resistance among bacterial strains, phage-based therapies are becoming more and more attractive. The critical problem is the storage of bacteriophages. Recently, it was found that bacteriophages might adsorb on the surfaces of plastic containers, effectively decreasing the titer of phage suspensions. Here, we showed that a BOA nanocomposite (gold nanoparticles embedded in polyoxoborate matrix) deposited onto the inner walls of the containers stabilizes phage suspensions against uncontrolled adsorption and titer decrease. Additionally, BOA provides antibacterial and antifungal protection. The application of BOA assures safe and sterile means for the storage of bacteriophages.

Fabricating and printing chemiresistors based on monolayer-capped metal nanoparticles

Chemiresistors that are based on monolayer-capped metal nanoparticles (MCNPs) have been used in a wide variety of innovative sensing applications, including detection and monitoring of diagnostic markers in body fluids, explosive materials, environmental contaminations and food quality control. The sensing mechanism is based on reversible swelling or aggregation and/or changes in dielectric constant of the MCNPs. In this protocol, we describe a procedure for producing MCNP-based chemiresistive sensors that is reproducible from device to device and from batch to batch. The approach relies on three main steps: (i) controlled synthesis of gold MCNPs, (ii) fabrication of electrodes that are surrounded with a microbarrier ring to confine the deposited MCNP solution and (iii) a tailor-made drying process to enable evaporation of solvent residues from the MCNP sensing layer to prevent a coffee-ring effect. Application of this approach has been shown to produce devices with ±1.5% variance-a value consistent with the criterion for commercial sensors-as well as long shelf life and stability. Fabrication of chemical sensors based on dodecanethiol- or 2-ethylhexanethiol-capped MCNPs with this approach provides high sensitivity and accuracy in the detection of volatile organic compounds (e.g., octane and decane), toxic gaseous species (e.g., HCl and NH₃) in air and simulated mixtures of lung and gastric cancer from exhaled breath.

Physicochemical defect guided dewetting of ultrathin films to fabricate nanoscale patterns

Pathways to fabricate self-organized nanostructures have been identified exploiting the instabilities of ultrathin (<100 nm) polystyrene (PS) film on the polydimethylsiloxane (PDMS) substrates loaded with discrete and closely packed gold nanoparticles (AuNPs). The AuNPs were deposited on the PDMS substrates by chemical treatment, and the size and periodicity of the AuNPs were varied before coating the PS films. The study unveils that the physicochemical heterogeneity created by the AuNPs on the PDMS surface could guide the hole-formation, influence the average spacing between the holes formed at the initial dewetting stage, and affects the spacing and periodicity of the droplets formed at the end of the dewetting phase. The size and spacing of the holes and the droplets could be tuned by varying the nanoparticle loading on the PDMS substrate. Interestingly, as compared to the dewetting of PS films on the homogeneous PDMS surfaces, the AuNP guided dewetted patterns show ten-fold miniaturization, leading to the formation of the micro-holes and nanodroplets. The spacing between the droplets could also see a ten-fold reduction resulting in high-density random patterns on the PDMS substrate. Further, the use of a physicochemical substrate with varying density of physicochemical heterogeneities could impose a long-range order to the dewetted patterns to develop a gradient surface. The reported results can be of significance in the fabrication of high-density nanostructures exploiting the self-organized instabilities of thin polymers films.

Self-assembly of colloidal nanoparticles into 2D arrays at water-oil interfaces: rational construction of stable SERS substrates with accessible enhancing surfaces and tailored plasmonic response

Self-assembly at water-oil interfaces has been shown to be a cheap, convenient and efficient route to obtain densely packed layers of plasmonic nanoparticles which have small interparticle distances. This creates highly plasmonically active materials that can be used to give strong SERS enhancement and whose structure means that they are well suited to creating the highly stable, reproducible and uniform substrates that are needed to allow routine and accurate quantitative SERS measurements. A variety of methods have been developed to induce nanoparticle self-assembly at water-oil interfaces, fine tune the surface chemistry and adjust the position of the nanoparticles at the interface but only some of these are compatible with eventual use in SERS, where it is important that target molecules can access the active surface unimpeded. Similarly, it is useful to transform liquid plasmonic arrays into easy-to-handle free-standing solid films but these can only be used as solid SERS substrates if the process leaves the surface nanoparticles exposed. Here, we review the progress made in these research areas and discuss how these developments may lead towards achieving rational construction of tailored SERS substrates for sensitive and quantitative SERS analysis.

Review of the Mechanism of Nanocarriers and Technological Developments in the Field of Nanoparticles for Applications in Cancer Theragnostics

Cancer cannot be controlled by the usage of drugs alone, and thus, nanotechnology is an important technique that can provide the drug with an impetus to act more effectively. There is adequate availability of anticancer drugs that are classified as alkylating agents, hormones, or antimetabolites. Nanoparticle (NP) carriers increase the residence time of the drug, thereby enhancing the survival rate of the drug, which otherwise gets washed off owing to the small size of the drug particles by the excretory system. For example, for enhancing the circulation, a coating of nonfouling polymers like PEG and dextran is done. Famous drugs such as doxorubicin (DOX) are commonly encapsulated inside the nanocomposite. The various classes of nanoparticles are used to enhance drug delivery by aiding it to fight against the tumor. Targeted therapy aims to attack the cells with features common to the cancer cells while minimizing damage to the normal cell, and these therapies work in one in four ways. Some block the cancer cells from reproducing newer cells, others release toxic substances to kill the cancer cells, some stimulate the immune system to destroy the cancer cells, and some block the growth of more blood vessels around cancer cells, which starve the cells of the nutrients, which is needed for their growth. This review aims to testify the advancements nanotechnology has brought in cancer therapy, and its statements are supported with recent research findings and clinical trial results.

Nanoplasmonic sensor array for the detection and discrimination of pesticide residues in citrus fruits

Great attention has been directed towards developing rapid and straightforward methods for the identification of various pesticides that are usually used simultaneously in citrus fruits. The extensive use of diverse classes of pesticides in citrus fruits and their high toxicity may cause serious diseases in the human body. In the current study, a non-enzymatic sensor array has been developed for the identification and discrimination of five different pesticides belonging to diverse classes, including organophosphate, carbamate, and bipyridylium. For this aim, two gold nanoparticles (AuNPs) with different capping agents, citrate and borohydride, were used as sensing elements. The aggregation-induced spectra alterations of AuNPs were utilized to identify the pesticides in a wide range of concentrations (20-5000 ng mL-1). We have employed data visualization methods (i.e., heat maps, bar plots, and color difference maps), a supervised pattern recognition method (i.e., linear discrimination analysis), and partial least squares regression to qualitatively and quantitatively determine the pesticides. Finally, the practical applicability of the developed sensor array was evaluated for the identification of target pesticides in lime peel. The outcomes revealed that the probe could accurately verify the absence or presence of the pesticides in lime fruit.

Ligand structure and adsorption free energy of nanocrystals on solid substrates

We present an investigation on the absorption of alkylthiolated nanocrystals on a solid substrate. We calculate adsorption free energies and report a number of effects induced by the substrate. Nearest neighbor distances and bonding free energies are significantly different than for a free floating case, there is a weakening of bonding free energies among nanocrystals, and the adsorption is manifestly anisotropic, i.e., stronger along certain directions of the nanocrystal core. We contend that this last result accounts for the Bain transition (fcc → bcc) observed in experimental results. We report the presence of vortices induced by the substrate, which explain the increased nearest neighbor distance among nanocrystals, which is in excellent quantitative agreement with experimental results and with the predictions of the Orbifold Topological Model. Implications for the assembly of nanostructures and future experiments are also discussed.

Role of gold nanoparticles in advanced biomedical applications

Gold nanoparticles (GNPs) have generated keen interest among researchers in recent years due to their excellent physicochemical properties. In general, GNPs are biocompatible, amenable to desired functionalization, non-corroding, and exhibit size and shape dependent optical and electronic properties. These excellent properties of GNPs exhibit their tremendous potential for use in diverse biomedical applications. Herein, we have evaluated the recent advancements of GNPs to highlight their exceptional potential in the biomedical field. Special focus has been given to emerging biomedical applications including bio-imaging, site specific drug/gene delivery, nano-sensing, diagnostics, photon induced therapeutics, and theranostics. We have also elaborated on the basics, presented a historical preview, and discussed the synthesis strategies, functionalization methods, stabilization techniques, and key properties of GNPs. Lastly, we have concluded this article with key findings and unaddressed challenges. Overall, this review is a complete package to understand the importance and achievements of GNPs in the biomedical field.

Design, Synthesis, Computational and Biological Evaluation of 4-Amino-3,5-dimercapto-1,2,4-triazole Surface Functionalized Gold Nanoparticles

Gold nanoparticles (AuNPs) are an obvious choice for rapid advance in nanotechnology due to their amenability of synthesis, functionalization and less toxicity. Functionalization of AuNP surface with 4-amino-3,5-dimercapto-1,2,4-triazole (ADMT) ligand as ADMT-AuNPs was investigated with the aim to probe the suitability of innovative product to develop new antibacterial and anticancer strategies. Various characterization studies like UV-spectra, Zeta size, Zeta potential, XRD, SEM, TEM and FTIR results of AuNPs and ADMT-AuNPs have been performed to study the structural and electronic properties. The studies revealed that the functionalized nanoparticles are highly crystalline in nature with the sizes ranging between 20-22 and 50-55 nm for AuNPs and ADMT-AuNPs, respectively with FCC structures. The characterization data reveals that the synthesized nanoparticles are stable and presence of strong interactions between the metallic surface and the organic ligand. Further, ADMT-AuNPs showed good antibacterial activity against Gram-positive and Gram-negative bacteria. MTT assay exhibited the cell viability with an IC50 value of 45.32 % v/v for ADMT-AuNPs against breast adenocarcinoma (MCF-7) cell lines. Molecular characterization i.e., in silico docking analysis helped in identifying and organizing the structural similarity/diversity at the molecular level. The in silico study indicated that the structure S1a has good glide score and glide energy for H-bonding among the possible conformations against bacterial and breast cancer protein. Molecular docking studies confirmed the introduction of conformational changes that are essential to surpass the potential energy barriers of ADMT-AuNPs for biocompatibility and proved that they hold a promising future in the medical field.

Solvent assisted size effect on AuNPs and significant inhibition on K562 cells

Herein, the synthesis and characterization of ideal size (∼10 and 40 nm, in diameter) AuNPs (gold nanoparticles) were reported. Two different organic solvents such as DMF (dimethyl formamide) and NMPL (N-methyl-2-pyrrolidone) were used to synthesize AuNPs along with agents reducing agents such as NaBH4 (sodium borohydrate) and Na3C6H5O7 (sodium citrate). The combination of [(HAuCl4)-(DMF)-(NaBH4)] gives AuNPs with an avg. size of 10.2 nm. Similarly, the combination of [(HAuCl4)-(NMPL)-(Na3C6H5O7)] gives AuNPs with an avg. size of 40.4 nm. The morphology of these nanoscale AuNPs has been characterized through TEM and HRTEM imaging followed by SAED for lattice parameters such as d-spacing value (2.6 Å/0.26 nm) of crystalline metal (Au) nanoparticles. Further, these unique and ideal nanoscale AuNPs were used to evaluate the potential working efficacy by using in vitro cell based studies on K562 (leukaemia) blood cancer cells. From the MTT assay results around 88% cell inhibition was measured for ∼10 nm sized AuNPs. The treated cells were stained with different fluorescent dyes such as FITC, DAPI, Rho-6G and their ruptured morphology has been reported in the respective sections. These types of ideal sized metal (Au) nanoparticles are recommended for various theranostics such as to cure breast, colon, lung and liver cancers.

A Novel Strategy for Fabricating a Strong Nanoparticle Monolayer and Its Enhanced Mechanism

This work presents the preparation of cross-linking Au nanoparticle (NP) monolayer membranes by the thiol exchange reaction and their enhanced mechanical properties. Dithiol molecules were used as a cross-linking mediator to connect the adjacent nanoparticles by replacing the original alkanethiol ligand in the monolayer. After cross-linking, the membrane integrity was maintained and no significant fracture was observed, which is crucial for the membrane serving as a nanodevice. TEM (Transmission Electron Microscopy), UV–Vis absorption spectrum, and GISAXS (grazing incidence small angle X-ray scattering) were performed to characterize the nanostructure before and after cross-linking. All results proved that the interparticle distance in the monolayer was controllably changed by using dithiols of different lengths as the cross-linking agent. Moreover, the modulus of the cross-linking monolayer was measured by atomic force microscopy (AFM) and the result showed that the membrane with a longer dithiol molecule had a larger modulus, which might derive from the unbroken and intact structure of the cross-linking monolayer due to the selected appropriately lengthed dithiol. This study provides a new way of producing a nanoparticle monolayer membrane with enhanced mechanical properties.

Synthesis of Single-Nanometer-Sized Gold Nanoparticles in Liquid-Liquid Dispersion System by Femtosecond Laser Irradiation

Gold nanoparticles (AuNPs) show unique optical properties and catalytic activities, and their synthesis from gold ions has been widely studied. One of the additive-reagent-free and noncontact production procedures is the reduction of gold ions in solution by femtosecond laser pulses; however, the aggregation of AuNPs is unavoidable in homogeneous solution. Here, we report the synthesis of single-nanometer-sized AuNPs in a mixture of aqueous HAuCl₄ solution and n-hexane (the mixture) and in aqueous HAuCl₄ solution (the aqueous solution) by femtosecond laser irradiation in the absence of any additive reagents. Transmission electron microscopy revealed that circlelike colonies consisting of well-separated AuNPs were obtained from the mixture, while highly stacked and agglomerated AuNPs were obtained from the aqueous solution. The mean size of AuNPs in the mixture was nearly independent of the laser irradiation time, whereas that obtained in aqueous solution was gradually shifted to smaller size by laser irradiation period. We propose that the adsorption of primary AuNPs on the surface of hexane microdroplets and the fragmentation of large AuNPs in water by successive laser pulses retain single-nanometer-sized AuNPs in the mixture. The use of liquid-liquid interface on hexane microdroplets in aqueous solution provides a simple and useful environment to synthesize small AuNPs without the aid of surfactants or capping agents.

Binary Thiol-Capped Gold Nanoparticle Monolayer Films for Quantitative Surface-Enhanced Raman Scattering Analysis

Surface-enhanced Raman scattering (SERS) can provide fingerprint information of analyte molecules with unparalleled sensitivity. However, quantitative analysis using SERS has remained one of the major challenges owing to the difficulty of obtaining reproducible SERS substrates with high-density hotspots. Here, we report the rational design and fabrication of a binary thiol-capped gold nanoparticle (AuNP) monolayer film (MLF) as a substrate for highly sensitive and quantitative SERS analysis. The two thiol ligands chemically bonded to the AuNPs play different roles: dodecanethiol with a long alkyl chain controls the interparticle gaps and electromagnetic coupling among AuNPs and 4-mercaptopyridine works as a Raman internal standard (IS). The binary thiol-capped AuNPs can self-assemble into an ordered MLF with high-density hotspots and uniformly distributed IS. The as-prepared MLF has been demonstrated as a reliable SERS substrate for quantitative detection of fungicide malachite green in aqueous solution, with a high enhancement factor (up to 3.3 × 10⁷) and a low detection limit (100 pM). Moreover, the MLF SERS substrate is flexible and transparent, which has enabled in situ detection of trace fungicide residues in a shrimp tissue.

Generalized On-Demand Production of Nanoparticle Monolayers on Arbitrary Solid Surfaces via Capillarity-Mediated Inverse Transfer

Century-old Langmuir monolayer deposition still represents the most convenient approach to the production of monolayers of colloidal nanoparticles on solid substrates for practical biological and chemical-sensing applications. However, this approach simply yields arbitrarily shaped large monolayers on a flat surface and is strongly limited by substrate topography and interfacial energy. Here, we describe a generalized and facile method of rapidly producing uniform monolayers of various colloidal nanoparticles on arbitrary solid substrates by using an ordinary capillary tube. Our method is based on an interesting finding of inversion phenomenon of a nanoparticle-laden air-water interface by flowing through a capillary tube in a manner that prevents the particles from adhesion to the capillary sidewall, thereby presenting the nanoparticles face-first at the tube's opposite end for direct and one-step deposition onto a substrate. We show that our method not only allows the placement of a nanoparticle monolayer at target locations of solid substrates regardless of their surface geometry and adhesion but also enables the production of monolayers containing nanoparticles with different size, shape, surface charge, and composition. To explore the potential of our approach, we demonstrate the facile integration of gold nanoparticle monolayers into microfluidic devices for the real-time monitoring of molecular Raman signals under dynamic flow conditions. Moreover, we successfully extend the use of our method to developing on-demand Raman sensors that can be built directly on the surface of consumer products for practical chemical sensing and fingerprinting. Specifically, we achieve both the pinpoint deposition of gold nanoparticle monolayers and sensitive molecular detection from the deposited region on clothing fabric for the detection of illegal drug substances, a single grain of rice and an orange for pesticide monitoring, and a $100 bill as a potential anti-counterfeit measure, respectively. We believe that our method will provide unique opportunities to expand the utility of colloidal nanoparticles and to greatly improve the accessibility of nanoparticle-based sensing technologies.

Control of Silver Coating on Raman Label Incorporated Gold Nanoparticles Assembled Silica Nanoparticles

Signal reproducibility in surface-enhanced Raman scattering (SERS) remains a challenge, limiting the scope of the quantitative applications of SERS. This drawback in quantitative SERS sensing can be overcome by incorporating internal standard chemicals between the core and shell structures of metal nanoparticles (NPs). Herein, we prepared a SERS-active core Raman labeling compound (RLC) shell material, based on Au⁻Ag NPs and assembled silica NPs (SiO₂@Au@RLC@Ag NPs). Three types of RLCs were used as candidates for internal standards, including 4-mercaptobenzoic acid (4-MBA), 4-aminothiophenol (4-ATP) and 4-methylbenzenethiol (4-MBT), and their effects on the deposition of a silver shell were investigated. The formation of the Ag shell was strongly dependent on the concentration of the silver ion. The negative charge of SiO₂@Au@RLCs facilitated the formation of an Ag shell. In various pH solutions, the size of the Ag NPs was larger at a low pH and smaller at a higher pH, due to a decrease in the reduction rate. The results provide a deeper understanding of features in silver deposition, to guide further research and development of a strong and reliable SERS probe based on SiO₂@Au@RLC@Ag NPs.