Fine-tuned nanostructures assembled from L-lysine-functionalized perylene bisimides

Using Solution History to Control Hydrogel Properties of a Perylene Bisimide

pH dependence on water soluble aggregates is well-known in the field of low molecular weight gelators (LMWGs), with different aggregates sometimes having very different properties depending on their final pH. This aggregation determines their applications and performance. Here, we investigate the pH dependence of perylene bisimide gels; initially solutions are formed at a high pH and gels form as the pH is decreased. We find it is not only the final pH but also the starting pH that can impact the resulting gel. We use small angle neutron scattering (SANS), rheology, 1 H NMR spectroscopy and absorption spectroscopy to examine the effect of starting pH on gelation kinetics and final gel properties. Adjusting the solution from pH 9 (where there are few or no aggregates) to pH 6 results in the formation of different worm-like micelles than the ones directly formed at pH 6, leading to again gels with different mechanical properties. This work highlights the importance of controlling the pH of solutions before gelation, but also opens up more possible morphologies and therefore more properties from the same molecule.

Self-Assembly, Bioactivity, and Nanomaterials Applications of Peptide Conjugates with Bulky Aromatic Terminal Groups

The self-assembly and structural and functional properties of peptide conjugates containing bulky terminal aromatic substituents are reviewed with a particular focus on bioactivity. Terminal moieties include Fmoc [fluorenylmethyloxycarbonyl], naphthalene, pyrene, naproxen, diimides of naphthalene or pyrene, and others. These provide a driving force for self-assembly due to π-stacking and hydrophobic interactions, in addition to the hydrogen bonding, electrostatic, and other forces between short peptides. The balance of these interactions leads to a propensity to self-assembly, even for conjugates to single amino acids. The hybrid molecules often form hydrogels built from a network of β-sheet fibrils. The properties of these as biomaterials to support cell culture, or in the development of molecules that can assemble in cells (in response to cellular enzymes, or otherwise) with a range of fascinating bioactivities such as anticancer or antimicrobial activity, are highlighted. In addition, applications of hydrogels as slow-release drug delivery systems and in catalysis and other applications are discussed. The aromatic nature of the substituents also provides a diversity of interesting optoelectronic properties that have been demonstrated in the literature, and an overview of this is also provided. Also discussed are coassembly and enzyme-instructed self-assembly which enable precise tuning and (stimulus-responsive) functionalization of peptide nanostructures.

Photocatalytic performance of heterojunction S-Tyr-NDI-Tyr/TiO2 formed by self-assembled naphthalimide derivatives and titanium dioxide

In this paper, a type of heterojunction photocatalyst S-Tyr-NDI-Tyr/TiO₂ was prepared by self-assembly of tyrosine-substituted naphthamide (NDA) and bonding with titanium dioxide. The self-assembly process and driving force of monomer M-Tyr-NDI-Tyr were simulated by theoretical calculation. Taking atenolol as the target pollutant, the photocatalytic performance of the heterojunction photocatalyst under visible light was studied, and the degradation products were analyzed by mass spectrometry. The environmental toxicity of photocatalytic process was evaluated by luminescent bacteria. The principle of high photocatalytic activity of S-Tyr-NDI-Tyr/TiO₂ heterojunction photocatalyst was proposed by analyzing the fluorescence spectrum, photocurrent density and resistance, electron paramagnetic resonance spectrum, free radical capture experiment and energy band position of S-Tyr-NDI-Tyr/TiO₂ heterojunction photocatalyst. In addition, the photocatalytic degradation of different pollutants by S-Tyr-NDI-Tyr/TiO₂ heterojunction photocatalyst was also studied. This work will provide a useful example for the further development of new and efficient organic supramolecular/inorganic semiconductor composite photocatalysts.

Supramolecular Nanostructures Based on Perylene Diimide Bioconjugates: From Self-Assembly to Applications

Self-assembling π-conjugated systems constitute efficient building blocks for the construction of supramolecular structures with tailored functional properties. In this context, perylene diimide (PDI) has attracted attention owing to its chemical robustness, thermal and photo-stability, and outstanding optical and electronic properties. Recently, the conjugation of PDI derivatives to biological molecules, including oligonucleotides and peptides, has opened new avenues for the design of nanoassemblies with unique structures and functionalities. In the present review, we offer a comprehensive summary of supramolecular bio-assemblies based on PDI. After briefly presenting the physicochemical, structural, and optical properties of PDI derivatives, we discuss the synthesis, self-assembly, and applications of PDI bioconjugates.

Metal-organic cycle-based multistage assemblies

Different from polymers or peptides (lacking metals), metal–organic cycles (MOCs) have properties which arise from the combination of metals and common nonmetal elements and topologies. The development of MOC supramolecular materials is in its infancy, and how the coordination bonds work to make the corresponding suprastructures is unknown. This has limited the potential application of these MOC-based materials. Considering the applications of individual MOCs, the study and discovery of the unique factors in MOC-involved multilevel self-assembly are critical to further our knowledge of the underlying molecular mechanisms of metal-containing compounds. Here, a systematic study of MOC assembly in various solvent systems has confirmed the critical role of coordination linkers in tuning the shape and size of the MOC-derived suprastructures.

It is well known that chemical compositions and structural arrangements of materials have a great influence on their resultant properties. Diverse functional materials have been constructed by using either biomolecules (peptides, DNA, and RNA) in nature or artificially synthesized molecules (polymers and pillararenes). The relationships between traditional building blocks (such as peptides) have been widely investigated, for example how hydrogen bonds work in the peptide multistage assembly process. However, in contrast to traditional covalent bond-based building blocks-based assembly, suprastructures formed by noncovalent bonds are more influenced by specific bond features, but to date only a few results have been reported based on noncovalent bond-based building block multistage assembly. Here, three metal–organic cycles (MOCs) were used to show how coordination bonds influence the bimetallacycle conformation then lead to the topology differences of MOC multilevel ordered materials. It was found that the coordination linker (isophthalate-Pt-pyridine) is an important factor to tune the shape and size of the MOC-derived suprastructures.

Stimuli-Responsive Transformable Supramolecular Nanotubes

Supramolecular nanotubes produced by self-assembly of organic molecules can have unique structural features such as a one-dimensional morphology with no branching, distinguishable inner and outer surfaces and membrane walls, or a structure that is hollow and has a high aspect ratio. Incorporation of functional groups that respond to external chemical or physical stimuli into the constituent organic molecules of supramolecular nanotubes allows us to drastically change the structure of the nanotubes by applying such stimuli. This ability affords an array of controllable approaches for the encapsulation, storage, and release of guest compounds, which is expected to be useful in the fields of physics, chemistry, biology, and medicine. In this article, I review the supramolecular nanotubes developed by our group that exhibit morphological transformations in response to pH, chemical reaction, light, temperature, or moisture.

Review on application of perylene diimide (PDI)-based materials in environment: Pollutant detection and degradation

Environment pollution is getting serious and various poisonous contaminants with chemical durability, biotoxicity and bioaccumulation have been widespreadly discovered in municipal wastewaters and surface water. The detection and removal of pollutants show great significance for the protection of human health and other organisms. Due to its distinctive physical and chemical properties, perylene diimide (PDI) has received widespread attention from different research fields, especially in the area of environment. In this review, a comprehensive summary of the development of PDI-based materials in fluorescence detection and advanced oxidation technology for environment was introduced. Firstly, we chiefly presented the recent progress about the synthesis of PDI and PDI-based nanomaterials. Then, their application in fluorescence detection for environment was presented and categorized, principally including the detection of heavy metal ions, harmful anions and organic contaminants in the environment. In addition, the application of PDI and PDI-based materials in different advanced oxidation technologies for environment, such as photocatalysis, photoelectrocatalysis, Fenton and Fenton-like reaction and persulfate activation, was also summarized. At last, the challenges and future prospects of PDI-based materials in environmental applications were discussed. This review focuses on presenting the practical applications of PDI and PDI-based materials as fluorescent probes or catalysts (especially photocatalysts) in the detection of hazardous substances or catalytic elimination of organic contaminants. The contents are aimed at supplying the researchers with a deeper understanding of PDI and PDI-based materials and encouraging their further development in environmental applications.

Growth of Extra-Large Chromophore Supramolecular Polymers for Enhanced Hydrogen Production

The control of morphology in bioinspired chromophore assemblies is key to the rational design of functional materials for light harvesting. We investigate here morphological changes in perylene monoimide chromophore assemblies during thermal annealing in aqueous environments of high ionic strength to screen electrostatic repulsion. We found that annealing under these conditions leads to the growth of extra-large ribbon-shaped crystalline supramolecular polymers of widths from about 100 nm to several micrometers and lengths from 1 to 10 μm while still maintaining a unimolecular thickness. This growth process was monitored by variable-temperature absorbance spectroscopy, synchrotron X-ray scattering, and confocal microscopy. The extra-large single-crystal-like supramolecular polymers are highly porogenic, thus creating loosely packed hydrogel scaffolds that showed greatly enhanced photocatalytic hydrogen production with turnover numbers as high as 13 500 over ∼110 h compared to 7500 when smaller polymers are used. Our results indicate great functional opportunities in thermally and pathway-controlled supramolecular polymerization.

Supramolecular fibrous gels with helical pitch tunable by polarity of alcohol solvents

A sugar-based, low-molecular-weight gelator 16AG, can gelatinize primary alcohols by forming supramolecular fibers. We obtained non-helical, tape-like fibers in methanol and ethanol but helical fibers in alcohols with at least three carbons. The pitch of the helical fibers became shorter with increasing carbon number.

Monolayer nanosheets formed by liquid exfoliation of charge-assisted hydrogen-bonded frameworks

Hydrogen-bonded organic frameworks (HOFs) are a diverse and tunable class of materials, but their potential as free-standing two-dimensional nanomaterials has yet to be explored. Here we report the self-assembly of two layered hydrogen-bonded frameworks based on strong, charge-assisted hydrogen-bonding between carboxylate and amidinium groups. Ultrasound-assisted liquid exfoliation of both materials readily produces monolayer hydrogen-bonded organic nanosheets (HONs) with micron-sized lateral dimensions. The HONs show remarkable stability and maintain their extended crystallinity and monolayer structures even after being suspended in water at 80 °C for three days. These systems also exhibit efficient fluorescence quenching of an organic dye in organic solvents, superior to the quenching ability of the bulk frameworks. We anticipate that this approach will provide a route towards a diverse new family of molecular two-dimensional materials.

Interlayer hydrogen bond-assisted poly(perylene diimide) photocatalysts to improve the oxygen evolution under visible light

The interlayer hydrogen bond-assisted poly(PDI) photocatalyst BU-PDI exhibits the highest oxygen evolution rate of 46.8 μmol h−1 under visible-light irradiation because its huge built-in electric field improves the charge separation and migration.

Tunable low-dimensional self-assembly of H-shaped bichromophoric perylenediimide Gemini in solution

A material with diverse self-assembled morphologies is extremely important and highly desirable because such samples can provide tunable optical and electronic properties, which are critical in applications such as organic photovoltaics, microelectronics and bio-imaging. Moreover, the synthesis and controllable self-assembly of H-shaped bichromophoric perylenediimides (PDIs) are needed to advance these materials in organic photovoltaics, microelectronics and bio-imaging; however, this has remained a great challenge thus far. Here, we successfully synthesize a novel H-shaped bichromophoric PDI Gemini through the palladium-catalyzed coupling reaction. The as-prepared PDI Gemini exhibited unprecedented tunable self-assembly behavior in solution, yielding diverse low-dimensional superstructures, such as one-dimensional (1D) helices, two-dimensional (2D) rectangular nanocrystals, pyramid-shaped parallelograms, ultralarge micro-sheets, and uniform nanospheres, under different self-assembly conditions. Of particular interest, the 2D hierarchical superstructures along with their formation mechanisms represent the first finding in the self-assembly of PDI-based molecules. This study opens a new avenue for tunable self-assembly of conjugated molecules and affords opportunities for the fabrication of novel self-assembled optical and electronic materials based on PDI molecules.

Soft-Matter Nanotubes: A Platform for Diverse Functions and Applications

Self-assembled organic nanotubes made of single or multiple molecular components can be classified into soft-matter nanotubes (SMNTs) by contrast with hard-matter nanotubes, such as carbon and other inorganic nanotubes. To date, diverse self-assembly processes and elaborate template procedures using rationally designed organic molecules have produced suitable tubular architectures with definite dimensions, structural complexity, and hierarchy for expected functions and applications. Herein, we comprehensively discuss every functions and possible applications of a wide range of SMNTs as bulk materials or single components. This Review highlights valuable contributions mainly in the past decade. Fifteen different families of SMNTs are discussed from the viewpoints of chemical, physical, biological, and medical applications, as well as action fields (e.g., interior, wall, exterior, whole structure, and ensemble of nanotubes). Chemical applications of the SMNTs are associated with encapsulating materials and sensors. SMNTs also behave, while sometimes undergoing morphological transformation, as a catalyst, template, liquid crystal, hydro-/organogel, superhydrophobic surface, and micron size engine. Physical functions pertain to ferro-/piezoelectricity and energy migration/storage, leading to the applications to electrodes or supercapacitors, and mechanical reinforcement. Biological functions involve artificial chaperone, transmembrane transport, nanochannels, and channel reactors. Finally, medical functions range over drug delivery, nonviral gene transfer vector, and virus trap.

Supramolecular Self-Assembly of Perylene Bisimide Derivatives Assisted by Various Groups

Anthra[2,1,9-def:6,5,10-d'e'f']diisoquinoline-1,3,8,10(2H,9H)-tetraone, namely, perylene bisimides (PBIs), belong to n-type organic semiconductors and possess potential applications in optoelectronic devices. The properties/performance of fabricated nanostructures/devices could be greatly influenced by both molecular structures of PBI building blocks and corresponding arrangement in assembled nanostructures. Many efforts have been made to modify the PBI core and then investigate the nanostructures and properties. However, it is still a great challenge to comprehensively understand the influence of molecular structures on the intermolecular interactions, the self-assembled structures, and the resulting performance. In the present contribution, we mainly summarize recent research aspects on supramolecular assembly behaviors of PBI derivatives assisted by various functional groups. First, a short introduction is given about basic molecular structure, properties, and self-assembly of PBI derivatives. Then, we mainly discuss the modulation of self-assembly of PBIs via introducing various functional groups (flexible or nonflexible chains, and biomolecules especially amino-acid-based groups). After that, the assembly of PBI derivatives from out-of-equilibrium states is described. Finally, a perspective is provided on the design of novel PBI derivatives and the fabrication of unique nanostructures with superior properties.

Photoswitchable Self-Assembly/Disassembly of Near-Infrared Fluorophores

A new photoswitchable near-infrared fluorophore (TDI-4DTE) with a symmetric structure exhibited reversible photo-controllable self-assembly and disassembly. The modification of π-conjugated terrylenediimide with four dithienylethene groups not only induced photoswitchable near-infrared fluorescence, but also photoregulated reversible precipitation-dissolution with microscopic and macroscopic polymorphism. Upon 302 nm UV-light irradiation, a noticeable precipitation was observed within seconds. The precipitate was gradually dissolved again in half an hour upon visible light irradiation. Different microscopic morphologies of the precipitates, including nanoparticles, nanofibrils and nanosheets, were observed when altering the intensity of the 302 nm light irradiation, indicating the dynamic control process of self-assembly. Upon UV-light irradiation, TDI-4DTE nanosheets were also obtained as a solid polymeric film, whereas well-defined nanoribbons with molecular monolayer thickness formed at the oil/water interface with slower assembly dynamics.

Convenient fabrication of conjugated polymer semiconductor nanotubes and their application in organic electronics

Organic heterojunction is indispensable in organic electronic devices, such as organic solar cells, organic light-emitting diodes and so on. Fabrication of core-shell nanostructure provides a feasible and novel way to prepare organic heterojunction, which is beneficial for miniaturization and integration of organic electronic devices. Fabrication of nanotubes which constitute the core-shell structure in large quantity is the key for the realization of application. In this work, a simple and convenient method to prepare nanotubes using conjugated copolymer of perylene diimide and dithienothiophene (P(PDI-DTT)) was demonstrated. The relationship between preparation conditions (solvent atmosphere, solution concentration and pore diameter of templates) and morphology of nanostructure was studied systematically. P(PDI-DTT) nanotubes could be fabricated in regular shape and large quantity by preparing the solution with appropriate concentration and placing anodic aluminium oxide template with nanopore diameter of 200 nm in the solvent atmosphere. The tubular structure was confirmed by scanning electron microscopy. P(PDI-DTT) nanotubes exhibited electron mobility of 0.02 cm2 V-1 s-1 in field-effect transistors under ambient condition. Light-emitting nanostructures were successfully fabricated by incorporating tetraphenylethylene into polymer nanotubes.

Controllable morphology and self-assembly of one-dimensional luminescent crystals based on alkyl-fluoro-substituted dithienophenazines

A class of dithienophenazine derivatives, 9,10-difluoro-2,5-dialkyldithieno[3,2-a:2′,3′-c]phenazine (F-n, n = 4, 5, 6, 7 and 8), modified with various lengths of linear alkyl chains were synthesized and used as building blocks to assemble luminescent one-dimensional (1D) nano/microcrystals.

Morphogenesis and Optoelectronic Properties of Supramolecular Assemblies of Chiral Perylene Diimides in a Binary Solvent System

Chiral supramolecular structures are attracting great attention due to their specific properties and high potential in chiral sensing and separation. Herein, supramolecular assembling behaviors of chiral perylene diimides have been systematically investigated in a mixed solution of tetrahydrofuran and water. They exhibit remarkably different morphologies and chiral aggregation behaviors depending on the mixing ratio of the solvents, i.e., the fraction of water. The morphogenesis and optoelectronic properties of chiral supramolecular structures have been thoroughly studied using a range of experimental and theoretical methods to investigate the morphological effects of chiral supramolecular assemblies on the electrical performances and photogenerated charge-carrier behaviors. In addition, chiral perylene diimides have been discriminated by combining vibrational circular dichroism with theoretical calculations, for the first time. The chiral supramolecular nanostructures developed herein strongly absorb visible spectral region and exhibit high photoresponsivity and detectivity, opening up new opportunities for practical applications in optoelectronics.

In situ polymerization of supramolecular nanorods assembled from polymerizable perylene bisimide

Dimethacryl amide functionalized perylene bisimide monomer was synthesized, in-situ free radical polymerization was then performed in the organized state to maintain the assembly structures.

Perylenediimide-based glycoclusters as high affinity ligands of bacterial lectins: synthesis, binding studies and anti-adhesive properties

Rapid access to perylenediimide-based glycoclusters allowed their evaluation as high affinity ligands of bacterial lectins and their potential as anti-adhesive antibacterials.

Role of intrinsic hydrogen bonds in the assembly of perylene imide derivatives in solution and at the liquid–solid interface

The impact of hydrogen bond formation on the supramolecular assembly of two perylene imide-based derivatives was systematically investigated.

Water-soluble pillar[5]arene induced the morphology transformation of self-assembled nanostructures and had further application in paraquat detection

Hex-4ClPBI can self-assemble into nanotubes in water, and the tubular structures can be transformed into nanoribbons and further vesicles by addition of H⁺ and further WP5.

Solvent-tunable morphology and emission of pyrene-dipeptide organogels

Two pyrene based organogelators in which the pyrene moiety has been linked to the diphenylalanine dipeptide have been synthesized. We show how the solvent can tune both the morphology and the optical properties of the organogels: spherical aggregates with quenched emission were obtained in acetonitrile, whereas an entangled fibrillar network with enhanced emission was formed in o-dichlorobenzene. Fourier transform infrared spectroscopy, circular dichroism and nuclear magnetic resonance spectroscopy experiments suggest that both π-π stacking and hydrogen bonding contribute to the formation of the supramolecular networks. Ultraviolet-visible and steady state emission studies demonstrated the formation of I-aggregates in acetonitrile. In contrast, in o-dichlorobenzene, the formation of J-type aggregates leads to assemblies with enhanced emission. These results give some insight into the important role of the gelling solvent in the morphology of the supramolecular gels and may help in the design of new soft-materials.

A self-assembled lysinated perylene diimide film as a multifunctional material for neural interfacing

We report the design, synthesis and structure-property investigation of a new perylene diimide material (PDI-Lys) bearing lysine end substituents. Water processed films of PDI-Lys were prepared and their self-assembly, morphology and electrical properties in both inert and air environments were theoretically and experimentally investigated. With the aim of evaluating the potential of PDI-Lys as a biocompatible and functional neural interface for organic bioelectronic applications, its electrochemical impedance as well as the adhesion and viability properties of primary neurons on the PDI-Lys films were studied. By combining theoretical calculations and electrical measurements we show that due to conversion between neutral and zwitterionic anions, the PDI-Lys film conductivity increased significantly upon passing from air to an inert atmosphere, reaching a maximum value of 6.3 S m^-1. We also show that the PDI-Lys film allows neural cell adhesion and neuron differentiation and decreases up to 5 times the electrode/solution impedance in comparison to a naked gold electrode. The present study introduces an innovative, water processable conductive film usable in organic electronics and as a putative neural interface.

Molecular assembly of highly symmetric molecules under a hydrogen bond framework controlled by alkyl building blocks: a simple approach to fine-tune nanoscale structures

To date, molecular assemblies under the contribution of hydrogen bond in combination with weak interactions and their consequent morphologies have been variously reported; however, how the systematic variation of the structure can fine-tune the morphologies has not yet been answered. The present work finds an answer through highly symmetric molecules, i.e. diamine-based benzoxazine dimers. This type of molecule develops unique molecular assemblies with their networks formed by hydrogen bonds at the terminal, while, at the same time, their hydrogen bonded frameworks are further controlled by the hydrophobic segment at the center of the molecule. When this happens, slight differences in hydrophobic alkyl chain lengths (, , and ) bring a significant change to the molecular assemblies, thus resulting in tunable morphologies, i.e. spheres, needles and dendrites. The superimposition between the crystal lattice obtained from X-ray single crystal analysis and the electron diffraction pattern obtained from transmission electron microscopy allows us to identify the molecular alignment from single molecules to self-assembly until the morphologies developed. The present work, for the first time, shows the case of symmetric molecules, where the hydrophobic building block controls the hydrogen bond patterns, leading to the variation of molecular assemblies with tunable morphologies.

Solvent-polarity-tuned nanostructures assembled from modified octadecylcarbamate with an anthracen moiety

A-9-YMOC tends to form nanofibers whereas it self-assembles in polar solvents and nanoflowers in nonpolar solvents with different molecular arrangements.

Proton induced aggregation of water soluble isophthalic acid appended arylene diimides: justification with perylene derivative

We report the self-assembly behaviour of five water soluble arylene diimides based on benzene, naphthalene and perylene moieties, by utilizing the essentiality of two major reversible supramolecular interactions, π-stacking and hydrogen bonding.

Self-assembled vesicle and rod-like aggregates of functionalized perylene diimide: reaction-based near-IR intracellular fluorescent probe for selective detection of palladium

Aggregates ofPS-PDIafter Pd⁰based depropargylation show de-aggregation and near-IR, ratiometric absorbance changes in water and live HeLa cells.

Photoinduced morphological transformations of soft nanotubes

In water, synthetic amphiphiles composed of a photoresponsive azobenzene moiety and an oligoglycine hydrogen-bonding moiety selectively self-assembled into nanotubes with solid bilayer membranes. The nanotubes underwent morphological transformations induced by photoisomerization of the azobenzene moiety within the membranes, and the nature of the transformation depended on the number of glycine residues in the oligoglycine moiety (i.e., on the strength of intermolecular hydrogen bonding). Upon UV-light irradiation of nanotubes prepared from amphiphiles with the diglycine residue, trans-to-cis isomerization induced a transformation from nanotubes (inner diameter (i.d.) 7 nm), several hundreds of nanometers to several tens of micrometers in length, to imperfect nanorings (i.d. 21-38 nm). The cis-to-trans isomerization induced by continuous visible-light irradiation resulted in the stacking of the imperfect nanorings to form nanotubes with an i.d. of 25 nm and an average length of 310 nm, which were never formed by a self-assembly process. Time-lapse fluorescence microscopy enabled us to visualize the transformation of nanotubes with an i.d. of 20 nm (self-assembled from amphiphiles with the monoglycine residue) to cylindrical nanofibers with an i.d. of 1 nm; shrinkage of the hollow cylinders started at the two open ends with simultaneous elongation in the direction of the long axis.

A lysinated thiophene-based semiconductor as a multifunctional neural bioorganic interface

Lysinated molecular organic semiconductors are introduced as valuable multifunctional platforms for neural cells growth and interfacing. Cast films of quaterthiophene (T4) semiconductor covalently modified with lysine-end moieties (T4Lys) are fabricated and their stability, morphology, optical/electrical, and biocompatibility properties are characterized. T4Lys films exhibit fluorescence and electronic transport as generally observed for unsubstituted oligothiophenes combined to humidity-activated ionic conduction promoted by the charged lysine-end moieties. The Lys insertion in T4 enables adhesion of primary culture of rat dorsal root ganglion (DRG), which is not achievable by plating cells on T4. Notably, on T4Lys, the number on adhering neurons/area is higher and displays a twofold longer neurite length than neurons plated on glass coated with poly-l-lysine. Finally, by whole-cell patch-clamp, it is shown that the biofunctionality of neurons cultured on T4Lys is preserved. The present study introduces an innovative concept for organic material neural interface that combines optical and iono-electronic functionalities with improved biocompatibility and neuron affinity promoted by Lys linkage and the softness of organic semiconductors. Lysinated organic semiconductors could set the scene for the fabrication of simplified bioorganic devices geometry for cells bidirectional communication or optoelectronic control of neural cells biofunctionality.

Chiral perylene diimides: building blocks for ionic self-assembly

A chiral perylene diimide building block has been prepared based on an amine derivative of the amino acid l‐phenylalanine. Detailed studies were carried out into the self‐assembly behaviour of the material in solution and the solid state using UV/Vis, circular dichroism (CD) and fluorescence spectroscopy. For the charged building block BTPPP, the molecular chirality of the side chains is translated into the chiral supramolecular structure in the form of right‐handed helical aggregates in aqueous solution. Temperature‐dependent UV/Vis studies of BTPPP in aqueous solution showed that the self‐assembly behaviour of this dye can be well described by an isodesmic model in which aggregation occurs to generate short stacks in a reversible manner. Wide‐angle X‐ray diffraction studies (WXRD) revealed that this material self‐organises into aggregates with π–π stacking distances typical for π‐conjugated materials. TEM investigations revealed the formation of self‐assembled structures of low order and with no expression of chirality evident. Differential scanning calorimetry (DSC) and polarised optical microscopy (POM) were used to investigate the mesophase properties. Optical textures representative of columnar liquid–crystalline phases were observed for solvent‐annealed samples of BTPPP. The high solubility, tunable self‐assembly and chiral ordering of these materials demonstrate their potential as new molecular building blocks for use in the construction of chiro‐optical structures and devices.

Highly fluorescent one-handed nanotubes assembled from a chiral asymmetric perylene diimide

Highly fluorescent bilayer nanotubes with a right- or left-handed helical sense were assembled from a chiral asymmetric perylene diimide.

Thermally sensitive self-assembly of glucose-functionalized tetrachloro-perylene bisimides: from twisted ribbons to microplates

Chiral supramolecular structures are becoming increasingly attractive for their specific molecular arrangements, exceptional properties, and promising applications in chiral sensing and separation. However, constructing responsive chiral supramolecular structures remains a great challenge. Here, glucose-functionalized tetrachloro-perylene bisimides (GTPBIs) with thermally sensitive self-assembly behaviors are designed and synthesized. In a methanol/water mixture, GTPBIs self-assembled into twisted ribbons and microplates at 4 and 25 °C, respectively. Furthermore, the ribbon structure was metastable and could transform into microplates when the temperature was increased from 4 to 25 °C. Transmission electron microscopy (TEM) was used to track the evolution of morphology and study the assembly mechanisms of correponding nanostructures at different time intervals. The supramolecular structures were characterized with various techniques, including circular dichroism, TEM, scanning electron microscopy, atomic force microscopy, ultraviolet-visible absorption, and fluorescence spectra. This study provides insight into controlling molecular parameters and assembly conditions to construct chiral supramolecular structures.

Tailorable aqueous dispersion of single-walled carbon nanotubes using tetrachloroperylene-based bolaamphiphiles via noncovalent modification

The enhanced dispersing capability of these bolaamphiphiles can be attributed to the large aromatic perylene core. The aqueous dispersion efficiency of single-walled carbon nanotubes (SWCNTs) is investigated by UV-vis absorption, fluorescence emission and Raman spectra, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. It is found that the tetrachloroperylene backbone moieties could interact with SWCNT via synergistic π-π and hydrophobic interactions, and the dispersing properties are closely related to the hydrophilic part of bolaamphiles. This study not only demonstrates tetrachloroperylene derivatives are able to stabilize SWCNTs, but also provides the possibility to understand the structure-property relationship between SWCNTs and tetrachloroperylene-based surfactants.

Thermodynamic factors impacting the peptide-driven self-assembly of perylene diimide nanofibers

Synthetic peptides offer enormous potential to encode the assembly of molecular electronic components, provided that the complex range of interactions is distilled into simple design rules. Here, we report a spectroscopic investigation of aggregation in an extensive series of peptide-perylene diiimide conjugates designed to interrogate the effect of structural variations. By fitting different contributions to temperature dependent optical absorption spectra, we quantify both the thermodynamics and the nature of aggregation for peptides by incrementally varying hydrophobicity, charge density, length, as well as asymmetric substitution with a hexyl chain, and stereocenter inversion. We find that coarse effects like hydrophobicity and hexyl substitution have the greatest impact on aggregation thermodynamics, which are separated into enthalpic and entropic contributions. Moreover, significant peptide packing effects are resolved via stereocenter inversion studies, particularly when examining the nature of aggregates formed and the coupling between π electronic orbitals. Our results develop a quantitative framework for establishing structure-function relationships that will underpin the design of self-assembling peptide electronic materials.

Differential self-assembly and tunable emission of aromatic peptide bola-amphiphiles containing perylene bisimide in polar solvents including water

We demonstrate the self-assembly of bola-amphiphile-type conjugates of dipeptides and perylene bisimide (PBI) in water and other polar solvents. Depending on the nature of the peptide used (glycine-tyrosine, GY, or glycine-aspartic acid, GD), the balance between H-bonding and aromatic stacking can be tailored. In aqueous buffer, PBI-[GY]2 forms chiral nanofibers, resulting in the formation of a hydrogel, while for PBI-[GD]2 achiral spherical aggregates are formed, demonstrating that the peptide sequence has a profound effect on the structure formed. In water and a range of other polar solvents, self-assembly of these two PBI-peptides conjugates results in different nanostructures with highly tunable fluorescence performance depending on the peptide sequence employed, e.g., fluorescent emission and quantum yield. Organogels are formed for the PBI-[GD]2 derivative in DMF and DMSO while PBI-[GY]2 gels in DMF. To the best of our knowledge, this is the first successful strategy for using short peptides, specifically, their sequence/structure relationships, to manipulate the PBI nanostructure and consequent optical properties. The combination of controlled self-assembly, varied optical properties, and formation of aqueous and organic gel-phase materials may facilitate the design of devices for various applications related to light harvesting and sensing.

Inversion of supramolecular chirality in bichromophoric perylene bisimides: influence of temperature and ultrasound

The supramolecular helicity in the self-assembled nanostructures of two perylene bisimide bichromophoric systems could be controlled by varying the preparatory methods. The self-assembly of the compounds under different conditions was investigated in detail by using absorption, fluorescence, CD, FTIR, XRD, TEM, and SEM techniques. These studies reveal that the heating-cooling method results in aggregates with ordered molecular packing and enhanced optical chirality. Ultrasonication leads to molecular aggregates with less ordered packing wherein the supramolecular chirality was reversed relative to the sample prepared via a heating-cooling method. This heating-cooling method proved to be superior in terms of nanofiber synthesis, yielding fibers with extended length and a prominent helical twist. At higher concentration, both compounds exhibited a gelation property in benzonitrile. The tunable chiroptical properties in these supramolecular systems make them potential candidates for applications in the field of optical and electronic device fabrication based on organic nanostructures.