A study of physical and covalent hydrogels containing pH-responsive microgel particles and graphene oxide

Three in One with Dual-Functional Hydrogel of Lactoferrin/NZ2114/LMSH Promoting Staphylococcus aureus-Infected Wound Healing

Wound infections caused by Staphylococcus aureus often result in localized suppurative lesions that severely impede the healing process, so it is urgent to develop a dress with efficient antimicrobial and pro-healing functions. In this study, the bifunctional injectable hydrogel lactoferrin (Lf)/NZ2114/lithium magnesium silicate hydrogel (LMSH) was first successfully prepared through the electrostatic interaction method. The physical, biological, and efficacy properties are systematically analyzed with good shear-thinning capacity and biocompatibility. More importantly, it inhibits infection and promotes wound healing in a mouse wound infection model after 14 d treatment, and the bactericidal rate and healing rate were over 99.92% and nearly 100%, respectively. Meanwhile, the massive reduction of inflammatory cells, restoration of tissue structure, and angiogenesis in mice showed the anti-inflammatory and pro-healing properties of the hydrogel. The healed wounds showed thickening with more hair follicles and glands, suggesting that the hydrogel Lf/NZ2114/LMSH (Three in One) could be a better dressing candidate for the treatment of S. aureus-induced wound infections.

Microgels based on 0D-3D carbon materials: Synthetic techniques, properties, applications, and challenges

Microgels are three-dimensional (3D) colloidal hydrogel particles with outstanding features such as biocompatibility, good mechanical properties, tunable sizes from submicrometer to tens of nanometers, and large surface areas. Because of these unique qualities, microgels have been widely used in various applications. Carbon-based materials (CMs) with various dimensions (0-3D) have recently been investigated as promising candidates for the design and fabrication of microgels because of their large surface area, excellent conductivity, unique chemical stability, and low cost. Here, we provide a critical review of the specific characteristics of CMs that are being incorporated into microgels, as well as the state-of-the art applications of CM-microgels in pollutant adsorption and photodegradation, H₂ evoluation, CO₂ capture, soil conditioners, water retention, drug delivery, cell encapsulation, and tissue engineering. Advanced preparation techniques for CM-microgel systems are also summarized and discussed. Finally, challenges related to the low colloidal stability of CM-microgels and development strategies are examined. This review shows that CM-microgels have the potential to be widely used in various practical applications.

Functional Stimuli-Responsive Gels: Hydrogels and Microgels

One strategy that has gained much attention in the last decades is the understanding and further mimicking of structures and behaviours found in nature, as inspiration to develop materials with additional functionalities. This review presents recent advances in stimuli-responsive gels with emphasis on functional hydrogels and microgels. The first part of the review highlights the high impact of stimuli-responsive hydrogels in materials science. From macro to micro scale, the review also collects the most recent studies on the preparation of hybrid polymeric microgels composed of a nanoparticle (able to respond to external stimuli), encapsulated or grown into a stimuli-responsive matrix (microgel). This combination gave rise to interesting multi-responsive functional microgels and paved a new path for the preparation of multi-stimuli "smart" systems. Finally, special attention is focused on a new generation of functional stimuli-responsive polymer hydrogels able to self-shape (shape-memory) and/or self-repair. This last functionality could be considered as the closing loop for smart polymeric gels.

Highly deformable hydrogels constructed by pH-triggered polyacid nanoparticle disassembly in aqueous dispersions

Most hydrogels are prepared using small-molecule monomers but unfortunately this approach may not be feasible for certain biomaterial applications. Consequently, alternative gel construction strategies have been established, which include using covalent inter-linking of preformed gel particles, or microgels (MGs). For example, covalently interlinking pH-responsive MGs can produce hydrogels comprising doubly crosslinked microgels (DX MGs). We hypothesised that the deformability of such DX MGs was limited by the presence of intra-MG crosslinking. Thus, in this study we designed new nanoparticle (NP)-based gels based on pH-swellable NPs that are not internally crosslinked. Two polyacid NPs were synthesised containing methacrylic acid (MAA) and either ethyl acrylate (EA) or methyl methacrylate (MMA). The PMAA-EA and PMAA-MMA NPs were subsequently vinyl-functionalised using glycidyl methacrylate (GMA) prior to gel formation via free-radical crosslinking. The NPs mostly disassembled on raising the solution pH but some self-crosslinking was nevertheless evident. The gels constructed from the EA- and MMA-based NPs had greater breaking strains than a control DX MG. The effect of varying the solution pH during curing on the morphology and mechanical properties of gels prepared using PMAA-MMA-GMA NPs was studied and both remarkable deformability and excellent recovery were observed. The gels were strongly pH-responsive and had tensile breaking strains of up to 420% with a compressive strain-at-break of more than 93%. An optimised formulation produced the most deformable and stretchable gel yet constructed using NPs or MGs as the only building block.

Pickering Emulsions Stabilized by pH-Responsive Microgels and Their Scalable Transformation to Robust Submicrometer Colloidoisomes with Selective Permeability

Colloidosomes are micrometer-sized hollow particles that have shells consisting of coagulated or fused colloid particles. While many large colloidosomes with sizes well above 1.0 μm have been prepared, there are fewer examples of submicrometer colloidosomes. Here, we establish a simple emulsion templating-based method for the preparation of robust submicrometer pH-responsive microgel colloidosomes. The colloidosomes are constructed from microgel particles based on ethyl acrylate and methacrylic acid with peripheral vinyl groups. The pH-responsive microgels acted as both a Pickering emulsion stabilizer and macro-cross-linker. The emulsion formation studies showed that the minimum droplet diameter was reached when the microgel particles were partially swollen. Microgel colloidosomes were prepared by covalently interlinking the microgels adsorbed at the oil-water interface using thermal free-radical coupling. The colloidosomes were prepared using a standard high-shear mixer with two different rotor sizes that corresponded to high shear (HS) and very high shear (VHS) mixing conditions. The latter enabled the construction of submicrometer pH-responsive microgel-colloidosomes on the gram scale. The colloidosomes swelled strongly when the pH increased to above 6.0. The colloidosomes were robust and showed no evidence of colloidosome breakup at high pH. The effect of solute size on shell permeation was studied using a range of FITC-dextran polymers, and size-selective permeation occurred. The average pore size of the VHS microgel-colloidosomes was estimated to be between 6.6 and 9.0 nm at pH 6.2. The microgel-colloidosome properties suggest that they have the potential for future applications in cosmetics, photonics, and delivery.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.

Using intra-microgel crosslinking to control the mechanical properties of doubly crosslinked microgels

Microgels (MGs) are crosslinked polymer particles that swell when the pH approaches the pKa of the constituent polymer. Our earlier work showed that concentrated MG dispersions can be covalently interlinked to form macroscopic hydrogels, which are termed doubly crosslinked microgels (DX MGs). Here, we study for the first time the effects of intra-MG crosslinking on the swelling of the MGs and the mechanical properties of the DX MGs. The MGs were synthesised by emulsion copolymerisation of ethyl acrylate (EA) or methacrylic acid (MAA) and divinylbenzene (DVB). The latter was a crosslinking monomer. For comparison, MGs were prepared where DVB was replaced by either 1,4-butanediol diacrylate (BDDA) or a 1 : 1 mixture of both DVB and BDDA. The MG swelling behaviours were studied by dynamic light scattering; whereas, the DX MG mechanical properties were studied by dynamic rheology and uniaxial compression measurements. Inclusion of DVB within the MGs resulted in both highly swelling MGs and highly ductile DX MGs. The average strain-at-break value for the DVB-containing DX MGs was 76% which represents the highest value yet reported for a DX MG prepared using commercially available monomers. It was also shown that good tuneability of the DX MG properties could be obtained simply by controlling the DVB and BDDA contents within the MG particles. Analysis of the swelling and compression data enabled relationships between the volume-swelling ratio of the MGs and either the modulus or strain-at-break values for the DX MGs. These relationships also applied to a DVB-free system prepared with a low BDDA content. An interesting conclusion from this study is that the DX MGs can be thought of mechanically as macroscopic MG particles. The results of this study provide design tools for improving DX MG ductility and hence increasing the range of potential applications for this new class of hydrogel.

A study of conductive hydrogel composites of pH-responsive microgels and carbon nanotubes

Conductive gel composites are attracting considerable attention because of their interesting electrical and mechanical properties. Here, we report conductive gel composites constructed using only colloidal particles as building blocks. The composites were prepared from mixed dispersions of vinyl-functionalised pH-responsive microgel particles (MGs) and multi-walled carbon nanotubes (CNTs). MGs are crosslinked pH-responsive polymer colloid particles that swell when the pH approaches the pKa of the particles. Two MG systems were used which contained ethyl acrylate (EA) or methyl acrylate (MA) and around 30 mol% of methacrylic acid (MAA). The MA-based MG is a new pH-responsive system. The mixed MG/CNT dispersions formed thixotropic physical gels. Those gels were transformed into covalent interlinked electrically conducting doubly crosslinked microgel/CNT composites (DX MG/CNT) by free-radical reaction. The MGs provided the dual roles of dispersant for the CNTs and macro-crosslinker for the composite. TEM data showed evidence for strong attraction between the MG and the CNTs which facilitated CNT dispersion. An SEM study confirmed CNT dispersion throughout the composites. The mechanical properties of the composites were studied using dynamic rheology and uniaxial compression measurements. Surprisingly, both the ductility and the modulus of the gel composites increased with increasing CNT concentration used for their preparation. Human adipose-derived mesenchymal stem cells (AD-MSCs) exposed to DX MG/CNT maintained over 99% viability with metabolic activity retained over 7 days, which indicated non-cytotoxicity. The results of this study suggest that our approach could be used to prepare other DX MG/CNT gel composites and that these materials may lead to future injectable gels for advanced soft-tissue repair.

Composite hydrogels of polyacrylamide and crosslinked pH-responsive micrometer-sized hollow particles

Whilst hydrogels and hollow particles both continue to attract much attention in the literature there are few examples of hydrogel composites containing hollow particles. Here, we study composite polyacrylamide (PAAm) hydrogels containing micrometer-sized pH-responsive shell-crosslinked hollow particles (abbreviated as HPXL) based on poly(methylmethacrylate-co-methacrylic acid) functionalised with glycidyl methacrylate (GMA). The HPXL particles were prepared using our scaleable emulsion template method and inclusion of GMA was found to promote spherical hollow particle formation. The pendant vinyl groups from GMA enabled shell-crosslinked hollow particles to be prepared prior to formation of the PAAm/HPXL composite gels. The morphologies of the particles and composite gels were studied by optical microscopy, confocal laser scanning microscopy and scanning electron microscopy. Dynamic rheology measurements for the composite gels showed that the modulus variation with HPXL concentration could be described by a percolation model with a HPXL percolation threshold concentration of 4.4 wt% and a scaling exponent of 2.6. The composite gels were pH-responsive and largely maintained their mechanical properties over the pH range 4.0 to 8.0. Because the composite gels had tuneable mechanical properties (with modulus values up to 530 kPa) and were pH-responsive they are potential candidates for future wound healing or membrane applications.

Click reactive microgels as a strategy towards chemically injectable hydrogels

Doubly crosslinked microgels (DX microgels) are hydrogels constructed by covalently interlinked microgel particles, offering two levels of hierarchy within the network, the first one being the microgel and the second being the interlinked microgel network.

pH-responsive water-in-water Pickering emulsions

The structure and stability of water-in-water emulsions was investigated in the presence of spherical, pH-sensitive microgels. The emulsions were formed by mixing aqueous solutions of dextran and PEO. The microgels consisted of cross-linked, synthetic polymers with a radius that steeply increased from 60 to 220 nm with increasing pH within a narrow range around 7.0. At all pH values between 5.0 and 7.5, the microgels were preferentially situated at the interface, but only in a narrow range between pH 7.0 and 7.5, the emulsions were stable for at least 1 week. The droplet size was visualized with confocal laser scanning microscopy and was found to be smallest in the stable pH range. Emulsions could be stabilized or destabilized by small changes of the pH. Addition of small amounts of salt led to a shift of the pH range where the emulsions were stable. The effects of varying the microgel concentration and the polymer composition were investigated.

Doubly crosslinked microgel-colloidosomes: a versatile method for pH-responsive capsule assembly using microgels as macro-crosslinkers

Covalent inter-linking of vinyl-functionalised microgels adsorbed to oil droplets gives pH-responsive doubly crosslinked microgel colloidosomes.

Highly flexible heparin-modified chitosan/graphene oxide hybrid hydrogel as a super bilirubin adsorbent with excellent hemocompatibility

A highly flexible heparin-modified chitosan/graphene oxide hydrogel was prepared using lyophilization–neutralization–modification as a blood-compatible adsorbent for bilirubin removal.