Preparation and properties of ion-imprinted hollow particles for the selective adsorption of silver ions

Enhanced molecular recognition with longer chain crosslinkers in molecularly imprinted polymers for an efficient separation of TR active substances

Molecular imprinting technology has been widely studied as a technique to obtain molecular recognition by artificial means. Selecting functional monomers or polymerization conditions plays a key role to optimize molecularly imprinted polymer (MIP) synthesis. To date, there have been few reports well exploiting the effect of crosslinkers. Here, in this study, we synthesized the MIPs using poly(ethyleneglycol) dimethacrylate with different units of ethylene oxide (n = 1 to 23) as crosslinkers to observe the molecular recognition abilities. The MIPs were attached to the surface of mono-dispersed polymer beads. The obtained spherical MIPs and non-imprinted polymers were filled in a column for high performance liquid chromatography. Then the retention selectivity toward TR active substances was evaluated. The result revealed that the recognition ability did not improve regardless of the amount of ethylene oxide. With the crosslinker (n = 9), extremely high retention selectivity was observed, which provides at most around ten times as large imprinting factors in comparison with other MIPs. Interestingly, we obtained the highest recognition ability at around polymerization temperature from the evaluation of the recognition ability toward temperature shift using the MIP (n = 9). In general, hydrogen bonding based on MIPs provides high recognition ability at low temperature, whereas, this study indicates that the use of flexible crosslinkers may enable the synthesis of MIPs that precisely memorize the conditions of polymerization. Lastly, we simultaneously analyzed the TR active substances using the column filled with MIPs (n = 9). The result showed relatively linear correlation between the retention strength of each substance and phycological activity toward TR obtained by yeast assay. Therefore, we can conclude that an induced fit like the receptor emerged by constructing the flexible molecular recognition field.

Flower-like Thiourea-Formaldehyde Resin Microspheres for the Adsorption of Silver Ions

Around a quarter of annual worldwide silver consumption comes from recycling. It remains a primary target for researchers to increase the silver ion adsorption capacity of the chelate resin. Herein, a series of flower-like thiourea-formaldehyde microspheres (FTFM) possessing diameters of 15-20 μm were prepared via a one-step reaction under acidic conditions, and the effects of the monomer molar ratio and reaction time on the micro-flower morphology, specific surface area, and silver ion adsorption performance were explored. The nanoflower-like microstructure showed the maximum specific surface area 18.98 ± 0.949 m²/g, which was 55.8 times higher than that of the solid microsphere control. As a result, the maximum silver ion adsorption capacity was 7.95 ± 0.396 mmol/g, which was 10.9 times higher than that of the control. Kinetic studies showed that the equilibrium adsorption amount of FT₁F₄M was 12.61 ± 0.016 mmol/g, which was 11.6 times higher than that of the control. Additionally, the isotherm study of the adsorption process was performed, and the maximum adsorption capacity of FT₁F₄M was 18.17 ± 1.28 mmol/g, which was 13.8 times that of the control according to the Langmuir adsorption model. Its high absorption efficiency, convenient preparation strategy, and low cost recommend FTFM bright for further use in industrial applications.

Ion-Imprinted Polymeric Materials for Selective Adsorption of Heavy Metal Ions from Aqueous Solution

The introduction of selective recognition sites toward certain heavy metal ions (HMIs) is a great challenge, which has a major role when the separation of species with similar physicochemical features is considered. In this context, ion-imprinted polymers (IIPs) developed based on the principle of molecular imprinting methodology, have emerged as an innovative solution. Recent advances in IIPs have shown that they exhibit higher selectivity coefficients than non-imprinted ones, which could support a large range of environmental applications starting from extraction and monitoring of HMIs to their detection and quantification. This review will emphasize the application of IIPs for selective removal of transition metal ions (including HMIs, precious metal ions, radionuclides, and rare earth metal ions) from aqueous solution by critically analyzing the most relevant literature studies from the last decade. In the first part of this review, the chemical components of IIPs, the main ion-imprinting technologies as well as the characterization methods used to evaluate the binding properties are briefly presented. In the second part, synthesis parameters, adsorption performance, and a descriptive analysis of solid phase extraction of heavy metal ions by various IIPs are provided.

Perfluorinated conjugated microporous polymer for targeted capture of Ag(I) from contaminated water

The maximum targeted capture silver from contaminated water is urgently necessary for sustainable development. Herein, the perfluorination conjugated microporous polymer adsorbent (F-CMP) has been fabricated by Sonogashira-Hagihara coupling reaction and employed to remove Ag(I) ions. Characterizations of NMR, XPS and FT-IR indicate the successful synthesis of F-CMP adsorbent. The influence factors of F-CMP on Ag(I) adsorption behavior are studied, and the adsorption capacity of Ag(I) reaches 251.3 mg/g. The experimental results of isothermal adsorption and kinetic adsorption are consistent with the Freundlich model and pseudo-second-order isothermal adsorption model, which follows a multilayer adsorption behavior on the uniform surface of the adsorbent, and the chemical adsorption becomes the main rate-limiting step. Combined with DFT calculation, the adsorption mechanism of Ag(I) by F-CMP is elucidated. The peaks shift of sp before and after adsorption is larger than that of F1s, suggesting that the -CC- on the F-CMP becomes the dominant chelation site of Ag(I). Furthermore, F-CMP exhibits specific adsorption for Ag(I) in polymetallic complex water, with the maximum selectivity coefficient of 31.5. Our study may provide a new possibility of perfluorinated CMPs for effective capture of Ag(I) ions to address environmental issues.

Hollow porous molecularly imprinted polymers as emerging adsorbents

Hollow porous molecularly imprinted polymers (HPMIPs) are identified as promising adsorbents with many advantageous properties (e.g., large number of imprinted cavities, highly accessible binding sites, controllable pore structure, and fast mass transfer). Because of such properties, HPMIPs can exhibit improved binding capacity and kinetics to make analyte molecules readily interact with a greater number of recognition sites on the imprinted shell. This review highlights the synthesis and utility of HPMIPs as adsorbents to cover diverse targets of interest (e.g., endocrine disrupting chemicals, pharmaceuticals, pesticides, and heavy metal ions). The overall potential of HPMIPs is thus discussed in the context of analytical chemistry with particular focus on the efficient extraction of trace-level targets from complex matrices.

Synthesis and Characterization of Functionalized Nanosilica for Zinc Ion Mitigation; Experimental and Computational Investigations

Zinc is an essential trace metal and its concentration above 4ppm reduces the aesthetic value of water. This study explores the possibility of using functionalized nanohybrids as Zn(II) ion scavengers from aqueous solution. Functionalized nanohybrids were synthesized by the attachment of thiosemicarbazide to silica. The material was characterized by TGA, SEM, FTIR, EDX, and BET analysis, which revealed ligand bonding to silica. The functionalized silica was employed as Zn(II) ion extractant in batch experiments and removed about 94.5% of the Zn(II) ions at pH 7, near zero point charge (6.5) in 30 min. Kinetics investigations revealed that zinc adsorption follows an intra particle diffusion mechanism and first-order kinetics (K = 0.1020 min⁻¹). The data were fitted to Freundlich, Dubinin–Radushkevich, and Langmuir models and useful ion exchange parameters were determined. The impact of co-existing ions on Zn(II) ion sequestration was also studied and it was found that the adsorbent can be used for selective removal of zinc with various ions in the matrix. Quantum mechanical investigations revealed that the Zn(II) ion adsorption on ZnBS1 is more favorable, having higher binding energy (BE) (−178.1 kcal/mol) and ∆H (−169.8), and making tridentate complex with the N and S sites of the chelating ligand. The negative ∆G and BE values suggest highly spontaneous Zn(II) adsorption on the modified silica even at low temperatures.

Preparation of ion-imprinted montmorillonite nanosheets/chitosan gel beads for selective recovery of Cu(Ⅱ) from wastewater

The novel ion-imprinted montmorillonite nanosheets/chitosan (IIMNC) gel beads were prepared for selective adsorption of Cu²⁺. The IIMNC gel beads were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The results showed that IIMNC was successfully assembled and rich in honeycombed pores, which performed well in the removal of Cu²⁺ through the synergistic effect of montmorillonite nanosheets and chitosan. The elimination of copper was followed by pseudo-second-order model and was enhanced by introduced montmorillonite nanosheets (MMTNS) because MMTNS attracted Cu(Ⅱ) by its negative charge and provided active adsorption sites through its high performance of cation exchange. This composite gel also showed excellent reusability, performing well in the removal of Cu²⁺ after undergoing adsorption-desorption in five cycles, because the adsorption sites of MMTNS can be continually reactivated by NaOH solution. More importantly, its high selectivity for Cu²⁺ provides a feasible way to recover Cu²⁺ from wastewater containing various cations.

Application of Polymer Inclusion Membranes Doped with Alkylimidazole to Separation of Silver and Zinc Ions from Model Solutions and after Battery Leaching

New materials, such as polymer inclusion membranes, can be used for water and wastewater treatment. In this paper, the selective transport of silver(I) and zinc(II) ions from nitrate solutions through the polymer inclusion membranes (PIMs), which consist of cellulose triacetate as a polymeric support, o-nitrophenyl pentyl ether as a plasticizer, and either 1-hexylimidazole (1) or 1-hexyl-2-methylimidazole (2) as an ion carrier, is studied. Both Zn(II) and Ag(I) model solutions (CM = 0.001 M, pH = 6.5), as well as the solutions after the leaching of a spent battery with a silver-zinc cell (silver-oxide battery), are tested. The results show that Zn(II) ions are effectively transported through PIMs containing either carrier, whereas Ag(I) is more easily transported through PIMs doped with (1). In the case of the leaching solution after 24 h transport, the recovery coefficients of Ag(I) and Zn(II) for PIMs doped with (1) are 86% and 90%, respectively, and for PIMs doped with (2), 47% and 94%, respectively. The influence of basicity and structure of carrier molecules on transport kinetics is discussed as well. PIMs are characterized by using an atomic force microscopy (AFM) technique.

Chiral helical substituted polyacetylene grafted on hollow polymer particles: preparation and enantioselective adsorption towards cinchona alkaloids

Hollow polymer particles tethering chiral helical polymer chains and functional carboxyl groups were prepared and applied in enantioselective adsorption.

Kinetic, Isotherm, and Thermodynamic Studies for Ag(I) Adsorption Using Carboxymethyl Functionalized Poly(glycidyl methacrylate)

Industrial wastewater contains large amounts of silver ions. Here, a new adsorbent was synthesized by functionalizing poly(glycidyl methacrylate) with carboxymethyl groups. The adsorbent was used to recover Ag(I) in wastewater. Fourier transform infrared spectroscopy, zeta potential, scanning electron microscopy, and X-ray photoelectron spectroscopy were used to characterize the adsorbent. The experimental parameters affecting the adsorption are solution pH, contact time, and initial silver ion concentration. The optimum pH for adsorption of Ag(I) is pH 4. The maximum adsorption capacity at pH 4 is 157.05 mg/g, and the adsorption reaches equilibrium at 300 min. The kinetics and isotherms of the adsorption process were described by pseudo second-order, Langmuir and D-R models, respectively. The adsorption process was a single layer chemical adsorption, exothermic, feasible, and spontaneous. The adsorption mechanism is electrostatic or chelation. The adsorbent selectively absorbed Ag(I) from coexisting ions (Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺). Finally, the removal rate of silver ions decreased from 79.29% to 65.01% after four repetitive experiments, which proved that the adsorbent had good reusability. The adsorbent has great potential benefit in removing Ag(I).

Selective Adsorption of Ag⁺ on a New Cyanuric-Thiosemicarbazide Chelating Resin with High Capacity from Acid Solutions

A new cyanuric-thiosemicarbazid (TSC-CC) chelating resin was synthesized and employed to selectively adsorb Ag⁺ from acid solutions. The effects of acid concentration, initial concentration of Ag⁺, contact time and coexisting ions were investigated. The optimal acid concentration was 0.5 mol/L. The adsorption capacity of Ag⁺ reached 872.63 mg/g at acid concentration of 0.5 mol/L. The adsorption isotherm was fitted well with the Langmuir isotherm model and the kinetic data preferably followed the pseudo-second order model. The chelating resin showed a good selectivity for the Ag⁺ adsorption from acid solutions. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Scanning electron microscopy/energy dispersive spectrometer (SEM-EDS) and X-ray photoelectron spectroscopy (XPS) were used to study the adsorption mechanism. The chelating and ionic interaction was mainly adsorption mechanism. The adsorbent presents a great potential in selective recovery Ag⁺ from acid solutions due to the advantage of high adsorption capacity and adapting strongly acidic condition. The recyclability indicated that the (TSC-CC) resin had a good stability and can be recycled as a promising agent for removal of Ag⁺.

Comparison of Co(ii) adsorption by a crosslinked carboxymethyl chitosan hydrogel and resin: behaviour and mechanism

This article studies the possible chemical and physical adsorption mechanism for Co(ii) onto the crosslinked carboxymethyl chitosan hydrogel and resin.

Bovine serum albumin interacts with silver nanoparticles with a "side-on" or "end on" conformation

As the nanoparticles (NPs) enter into the biological interface, they have to encounter immediate and first exposure to many proteins of different concentrations. The physicochemical interaction of NPs and proteins is greatly influenced not only by the number and type of proteins; but also the surface chemistry of NPs. To analyze the effects of NPs on proteins, the interaction between bovine serum albumin (BSA) and silver nanoparticles (AgNPs) at different concentrations were investigated. The interaction, BSA conformations, kinetics and adsorption were analyzed by UV-Visible spectrophotometer, dynamic light scattering (DLS), FT-IR spectroscopy and fluorescence quenching. DLS, FTIR and UV-visible spectrophotometric analysis confirms the interaction with minor alterations in size of the protein. Fluorescence quenching analysis confirms the side-on or end-on interaction of 1.5 molecules of BSA to AgNP. Further, pseudo-second order kinetics was determined with equilibrium contact-time of 30 min. The data of the present study determines the detailed evaluation of BSA adsorption on AgNP along with mechanism, kinetics and isotherm of the adsorption.

A modeling study by response surface methodology (RSM) on Sr(ii) ion dynamic adsorption optimization using a novel magnetic ion imprinted polymer

In this paper, response surface methodology (RSM) was successfully applied to optimize the dynamic adsorption conditions for the maximum removal of Sr(ii) ion from aqueous solutions using Sr(ii) ion imprinted polymers (Sr(ii)-IIPs) as adsorbents.

Optically active hollow nanoparticles constructed by chirally helical substituted polyacetylene

Hollow nanoparticles were constructed by chirally helical substituted polyacetylene and they demonstrated intriguing optical activity and high stability.

Competitive adsorption of three phenolic compounds to hydrophilic urea-formaldehyde macroporous foams derived from lignin-based Pickering HIPEs template

Hydrophilic urea-formaldehyde macroporous foams (UFMF) were simply synthesized by templating oil-in-water Pickering high internal phase emulsions (HIPEs) solely stabilized by lignin particles.