Influence of attachment strategy on the thermal stability of hybridized DNA on gold surfaces

Exploiting epoxy-rich poly(ethylene glycol) films for highly selective ssDNA sensing via electrochemical impedance spectroscopy

This study introduces an alternative approach to immobilize thiolated single-stranded DNA (ssDNA) for the DNA sensing. In contrast to the standard, monomolecular assembly of such moieties on gold substrate, over the thiolate-gold anchors, we propose to use bioinert, porous polyethylene glycol (PEG) films as a 3D template for ssDNA immobilization. The latter process relies on the reaction between the thiol group of the respectively decorated ssDNA and the epoxy groups in the epoxy-rich PEG matrix. The immobilization process and subsequent hybridization ability of the resulting sensing assembly were monitored using cyclic voltammetry and electrochemical impedance spectroscopy, with the latter tool proving itself as the most suitable transduction technique. Electrochemical data confirmed the successful immobilization of thiol-decorated ssDNA probes into the PEG matrix over the thiol-epoxy linkage as well as high hybridization efficiency, selectivity, and sensitivity of the resulting DNA sensor. Whereas this sensor was equivalent to the direct ssDNA assembly in terms of the efficiency, it exhibited a better selectivity and bioinert properties in view of the bioinert character of the PEG matrix. The above findings place PEG films as a promising platform for highly selective ssDNA sensing, leveraging their flexible chemistry, 3D character, and bioinert properties.

Unamplified and Real-Time Label-Free miRNA-21 Detection Using Solution-Gated Graphene Transistors in Prostate Cancer Diagnosis

The incidence of prostate cancer (PCa) in men globally increases as the standard of living improves. Blood serum biomarker prostate-specific antigen (PSA) detection is the gold standard assay that do not meet the requirements of early detection. Herein, a solution-gated graphene transistor (SGGT) biosensor for the ultrasensitive and rapid quantification detection of the early prostate cancer-relevant biomarker, miRNA-21 is reported. The designed single-stranded DNA (ssDNA) probes immobilized on the Au gate can hybridize effectively with the miRNA-21 molecules targets and induce the Dirac voltage shifts of SGGT transfer curves. The limit of detection (LOD) of the sensor can reach 10^-20  M without amplification and any chemical or biological labeling. The detection linear range is from 10^-20 to 10^-12  M. The sensor can realize real-time detection of the miRNA-21 molecules in less than 5 min and can well distinguish one-mismatched miRNA-21 molecule. The blood serum samples from the patients without RNA extraction and amplification are measured. The results demonstrated that the biosensor can well distinguish the cancer patients from the control group and has higher sensitivity (100%) than PSA detection (58.3%). Contrastingly, it can be found that the PSA level is not directly related to PCa.

How Surfaces Affect Hybridization Kinetics

Hybridization between nucleic acid strands immobilized on a solid support with partners in solution is widely practiced in bioanalytical technologies and materials science. An important fundamental aspect of understanding these reactions is the role played by immobilization in the dynamics of duplex formation and disassembly. This report reviews and analyzes literature kinetic data to identify commonly observed trends and to correlate them with probable molecular mechanisms. The analysis reveals that while under certain conditions impacts from immobilization are minimal so that surface and solution hybridization kinetics are comparable, it is more typical to observe pronounced offsets between the two scenarios. In the forward (hybridization) direction, rates at the surface commonly decrease by one to two decades relative to solution, while in the reverse direction rates of strand separation at the surface can exceed those in solution by tens of decades. By recasting the deviations in terms of activation barriers, a consensus of how immobilization impacts nucleation, zipping, and strand separation can be conceived within the classical mechanism in which duplex formation is rate limited by preassembly of a nucleus a few base pairs in length, while dehybridization requires the cumulative breakup of base pairs along the length of a duplex. Evidence is considered for how excess interactions encountered on solid supports impact these processes.

Thermal Stability of Thiolated DNA SAMs in Buffer: Revealing the Influence of Surface Crystallography and DNA Coverage via In Situ Combinatorial Surface Analysis

The thermal stability of thiol based DNA SAMs prepared on gold surfaces is an important parameter that is correlated to sensor lifetime. The thermal stability of DNA SAMs was evaluated in aqueous buffer through the use of fluorophore labeled DNA, a single crystal gold bead electrode, and microscopy. The stability of different crystallographic regions on the electrode was studied for thermal treatments up to 95 °C for 90 min. Using a in situ combinatorial surface analytical measurement showed that the crystallography of the underlying gold surface played a significant role, with the square or rectangular lattices (e.g., 110, 100, 210) having the highest stability. Surfaces with hexagonal lattices (e.g., 111, 311, 211) were less stable toward thermal treatments. These crystallographic trends were observed for both high and low coverage DNA SAMs. High coverage DNA SAMs were the most stable, with stability decreasing with decreasing coverage on average. Increasing DNA SAM coverage appears to slow the kinetics of thermal desorption, but the coordination to the underlying surface determined their relative stability. Preparing the DNA SAMs under nominally similar conditions were found to create surfaces that were similar at room temperature, but had significantly different thermal stability. Optimal DNA sensing with these surfaces most often requires low coverage DNA SAMs which results in poor thermal stability, which is predictive of a poor shelf life, making optimization of both parameters challenging. Furthermore, the crystallographically specific results should be taken into account when studying the typically used polycrystalline substrates since the underlying surface crystallography maybe different for different samples. It appears that preparing DNA SAMs with low coverage and significant thermal stability will be challenging using the current SAM preparation procedures.

Neutralized chimeric DNA probe for the improvement of GC-rich RNA detection specificity on the nanowire field-effect transistor

Silicon nanowire (SiNW) field-effect transistors (FETs) is a powerful tool in genetic molecule analysis because of their high sensitivity, short detection time, and label-free detection. In nucleic acid detection, GC-rich nucleic acid sequences form self- and cross-dimers and stem-loop structures, which can easily obtain data containing signals from nonspecific DNA binding. The features of GC-rich nucleic acid sequences cause inaccuracies in nucleic acid detection and hinder the development of precision medicine. To improve the inaccurate detection results, we used phosphate-methylated (neutral) nucleotides to synthesize the neutralized chimeric DNA oligomer probe. The probe fragment originated from a primer for the detection of hepatitis C virus (HCV) genotype 3b, and single-mismatched and perfect-matched targets were designed for single nucleotide polymorphisms (SNP) detection on the SiNW FET device. Experimental results revealed that the HCV-3b chimeric neutralized DNA (nDNA) probe exhibited better performance for SNP discrimination in 10 mM bis-tris propane buffer at 25 °C than a regular DNA probe. The SNP discrimination of the nDNA probe could be further improved at 40 °C on the FET device. Consequently, the neutralized chimeric DNA probe could successfully distinguish SNP in the detection of GC-rich target sequences under optimal operating conditions on the SiNW FET device.

Electrochemical Analysis of Ultrathin Polythiolsiloxane Films for Surface Biomodification

The ability of different crosslinkers to crosslink nanometer thick films of the polymer poly(mercaptopropyl)methylsiloxane (PMPMS), thus stabilizing these films on solid supports, was investigated. The four crosslinkers included 1,11-bismaleimidotriethyleneglycol (BM(PEG)3), tris-(2-maleimidoethyl)amine (TMEA), bismaleimidohexane (BMH), and 1,1′-(methylenedi-4,1-phenylene) bismaleimide (BMDPM). PMPMS films treated with the four crosslinkers were compared in the effectiveness of achieved crosslinking, continuity and stability of the films to rearrangement at elevated temperatures, and modification with single-stranded DNA. The results of electrochemical analyses show that more hydrophilic crosslinkers had difficulty reacting fully with PMPMS thiols, even in these nanometer thin layers. This observation highlights the critical importance of selecting crosslinkers that are chemically compatible. Optimal selection of crosslinker yielded films in which the polymer film was largely incapable of rearranging, even at elevated temperatures, yielding reproducible and stable layers. These results validate use of these supports for applications such as monitoring thermal denaturation of immobilized DNA duplexes.

Linear Chain Formation of Split-Aptamer Dimers on Surfaces Triggered by Adenosine

The detection of small molecules impacts various fields; however, their small size and low concentration are usually the cause of limitations in their detection. Thus, the need for biosensors with appropriate probes and signal amplification strategies is required. Aptamers are appropriate probes selected specifically against small targets such as adenosine. The possibility to split aptamers in parts led to original amplification strategies based on sandwich assays. By combining the self-assembling of oligonucleotide dimers with split-aptamer dangling ends and a surface plasmon resonance imaging technique, we developed an original amplification approach based on linear chain formation in the presence of the adenosine target. In this article, on the basis of sequence engineering, we analyzed its performance and the effect of the probe grafting density on the length of the chains formed at the surface of the biosensor.

Effect of Probe-Probe Distance on the Stability of DNA Hybrids on Surfaces

We have used temperature gradient surface plasmon resonance (SPR) measurements to quantitatively evaluate how the stability of different types of hybrids formed with DNA probes on surfaces is affected by probe spacing. SPR sensors with different average surface densities of probes were prepared by coadsorbing probes with lateral spacers strands comprised of phosphorothioated adenine nucleotides (A15*). Increasing the fraction of A15* spacers in the immobilization solution results in larger distances between probes on the sensor, determined here using a combination of SPR and X-ray photoelectron spectroscopy (XPS) measurements. The hybridization activities of probes were simultaneously measured over a temperature range that spanned the denaturation temperature (T_m) of hybrids by applying a spatial temperature gradient across the sensor surface. The resulting temperature profiles of hybridization activity show how the stability of hybrids increases as either the distance between probes or the ionic strength of the hybridization buffer increase. Additionally, hybridization activity profiles sharpen as the spacing between probes increases, indicating more homogeneous hybridization behavior of probes. The results provide quantitative experimental data for testing theoretical models of stability, supporting models that account for both repulsive interactions between DNA strands and local variability in probe surface density.

Effects of Chain-Chain Associations on Hybridization in DNA Brushes

Hybridization of solution nucleic acids to DNA brushes is widely encountered in diagnostic and materials science applications. Typically, brush chain lengths of ten or more nucleotides are used to provide the needed sequence specificity and binding affinity. At these lengths, coincidental occurrence of complementary regions is expected to lead to associations between the nominally single-stranded brush chains due to intra- or interchain base pairing. This report investigates how these associations impact the brushes' hybridization activity toward complementary "target" sequences. Brushes were prepared from 20-mer chains with four-nucleotide-long "adhesive regions" through which neighboring chains could interact. The affinity and position of the adhesive region along the chain backbone were varied. DNA brushes were exposed to complementary solution targets, and the corresponding melting transitions were measured to estimate free energies of the brush-target hybridization. These results revealed that higher affinity adhesive regions more extensively suppressed brush hybridization relative to hybridization in solution. Associations near the middle of the chains were found to be more penalizing than those at the immobilized or the free end of the chains. Provided that the brush chains were close enough to associate, changes in brush density did not exert a significant effect on hybridization thermodynamics within the investigated coverage window. Comparison of the DNA brush results with those from commercial Affymetrix single-nucleotide-polymorphism (SNP) microarrays revealed agreement in the impact of chain associations on hybridization.

Mechanistic Influence of Nanometer Length-Scale Surface Chemistry on DNA Hybridization

Hybridization of surface-immobilized oligonucleotides to their complementary counterparts is central to the rational design of novel nanodevices and DNA sensors. In this study, we have adopted a unified approach of combining sensing experiments with molecular dynamics simulations to characterize the hybridization of a 23 nucleotide long single-strand probe DNA tethered to a gold surface. Experiments indicate significant conformational changes of DNA in close vicinity (∼1 nm) of the gold surface upon hybridization and also conformational heterogeneity within hybridized DNA, consistent with simulation results. Simulations show that the conformational heterogeneity on a gold surface arises due to stabilization of surface-adsorbed partial and full duplexes, resulting in impeded hybridization in comparison to what observed on a repulsive surface. Furthermore, these simulations indicate that hybridization could be improved by tuning the nonspecific adsorption on a nanopatterned surface with an optimal patterning length. Simulations were performed on the probe tethered to gold nanodots of varying (2-8 nm) diameter. An improved hybridization of the present probe sequence was only observed for the 6 nm gold dots patterned on a repulsive surface. Results reveal that the 2D nanoconfinement provided by the 6 nm gold dot is optimal for reducing conformational heterogeneity for the specific sequence used in this study. Thus, improved DNA hybridization can be achieved on a gold nanodot patterned repulsive surface, where the optimal dot diameter will depend on the probe length and sequence. In summary, this study provides mechanistic insights onto hybridization on gold and offers a unique method toward improved hybridization on a nanopatterned surface with an optimized patterning length.