Poly(ethylene imine)-controlled calcium phosphate mineralization

Biomimetic Calcium Phosphate Nanoparticles: Biomineralization Models and Precursors for Composite Materials

The formation of calcium phosphate under the control of water-soluble polymers is important for understanding bone growth in living organisms. These experiments also have spin-offs in the creation of composite materials, including for regenerative medicine applications. The formation of calcium phosphate (hydroxyapatite) from calcium chloride and diammonium phosphate was studied in the presence of polymers containing carboxyl, amine, and imidazole groups. Depending on the polymer composition, solid products and stable dispersions of positively or negatively charged nanoparticles were obtained. Oppositely charged nanoparticles can interact with each other to form a macroporous composite material, which holds promise as a filler for bone defects. The formation of a calcium phosphate layer around a living cell (dinoflagellate Gymnodinium corollarium A. M. Sundström, Kremp et Daugbjerg) using positive composite nanoparticles is a one-step approach to cell mineralization.

Dendritic Polymers in Tissue Engineering: Contributions of PAMAM, PPI PEG and PEI to Injury Restoration and Bioactive Scaffold Evolution

The capability of radially polymerized bio-dendrimers and hyperbranched polymers for medical applications is well established. Perhaps the most important implementations are those that involve interactions with the regenerative mechanisms of cells. In general, they are non-toxic or exhibit very low toxicity. Thus, they allow unhindered and, in many cases, faster cell proliferation, a property that renders them ideal materials for tissue engineering scaffolds. Their resemblance to proteins permits the synthesis of derivatives that mimic collagen and elastin or are capable of biomimetic hydroxy apatite production. Due to their distinctive architecture (core, internal branches, terminal groups), dendritic polymers may play many roles. The internal cavities may host cell differentiation genes and antimicrobial protection drugs. Suitable terminal groups may modify the surface chemistry of cells and modulate the external membrane charge promoting cell adhesion and tissue assembly. They may also induce polymer cross-linking for healing implementation in the eyes, skin, and internal organ wounds. The review highlights all the different categories of hard and soft tissues that may be remediated with their contribution. The reader will also be exposed to the incorporation of methods for establishment of biomaterials, functionalization strategies, and the synthetic paths for organizing assemblies from biocompatible building blocks and natural metabolites.

A Polyplex in a Shell: The Effect of Poly(aspartic acid)-Mediated Calcium Carbonate Mineralization on Polyplexes Properties and Transfection Efficiency

Mineralization by exposure of organic templates to supersaturated solutions is used by many living organisms to generate specialized materials to perform structural or protective functions. Similarly, it was suggested that improved robustness acquired through mineralization under natural conditions could be an important factor for virus survival outside of a host for better transfection of cells. Here, inspired by this fact, we developed a nonviral tricomponent polyplex system for gene delivery capable of undergoing mineralization. First, we fabricated anionic polyplexes carrying pDNA by self-assembly with a lipid-modified cationic polymer and coating by poly(aspartic acid). Then, we submitted the polyplexes to a two-step mineralization reaction to precipitate CaCO₃ under various supersaturations. We carried out detailed morphological studies of the mineralized polyplexes and identified which parameters of the fabrication process were influential on transfection efficiency. We found that mineralization with CaCO₃ is efficient in promoting transfection efficiency as long as a certain Ca²⁺/CO₃^2- lower limit ratio is respected. However, calcium incubation can also be used to achieve similar effects at higher concentrations depending on polyplex composition, probably due to the formation of physical cross-links by calcium binding to poly(aspartic acid). We proposed that the improved robustness and transfection efficiency provided by means of mineralization can be used to expand the possible applications of polyplexes in gene therapy.

Enzyme-assisted mineralization of calcium phosphate: exploring confinement for the design of highly crystalline nano-objects

In hard tissues of vertebrates, calcium phosphate (CaP) biomineralization is a fascinating process that combines specific physicochemical and biochemical reactions, resulting in the formation of extracellular matrices with elegant nanoarchitectures. Although several "biomimetic" strategies have been developed for the design of mineralized nanostructured biointerfaces, the control of the crystallization process remains complex. Herein, we report an innovative approach to overcome this challenge by generating, in situ, CaP precursors in a confined medium. For this purpose, we explore a combination of (i) the layer-by-layer assembly, (ii) the template-based method and (iii) the heterogeneous enzymatic catalysis. We show the possibility of embedding active alkaline phosphatase in a nanostructured multilayered film and inducing the nucleation and growth of CaP compounds under different conditions. Importantly, we demonstrate that the modulation of the crystal phase from spheroid-shaped amorphous CaP to crystalline platelet-shaped hydroxyapatite depends on the degree of confinement of active enzymes. This leads to the synthesis of highly anisotropic mineralized nanostructures that are mechanically stable and with controlled dimensions, composition and crystal phase. The present study provides a straightforward, yet powerful, way to design anisotropic nanostructured materials, including a self-supported framework, which may be used in broad biomedical applications.

Phosphonic acid-functionalized poly(amido amine) macromers for biomedical applications

Novel phosphonic acid-functionalized poly(amido amine) (PAA) macromers are synthesized through aza-Michael addition of 2-aminoethyl phosphonic acid or its mixture with 5-amino-1-pentanol at different ratios onto N,N'-methylene bis(acrylamide) to control the amount of phosphonic acid functionality. The macromers were homo- and copolymerized with 2-hydroxyethyl methacrylate at different ratios to obtain hydrogels with various hydrophilicities. The hydrogels' swelling, biodegradation and mineralization properties were evaluated. The swelling and degradation rates of the gels can be tuned by the chemical structure of PAA macromer precursors as well as pH and CaCl₂ pre-treatment. The hydrogels show composition-dependent mineralization in SBF and 5xSBF, as evidenced from Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX) analyses. The degradation products of the hydrogels have no effect on U-2 OS, Saos-2 and NIH 3T3 cells, suggesting their cytocompatibility. Overall, these materials have potential to be used as nontoxic degradable biomaterials.

Calcium phosphate mineralization through homogenous enzymatic catalysis: Investigation of the early stages

HYPOTHESIS

The crystallization of calcium phosphate (CaP) is a ubiquitous process that occurs in several mineralized tissues and involves a variety of biochemical and chemical reactions. This issue has been hitherto continuously studied from supersaturated solutions (chemical procedure), i.e. by adding calcium and orthophosphate ions in a homogenous phase. Yet, both in vivo and in vitro investigations have clearly shown the implication of enzymes, namely alkaline phosphatase (ALP), to initiate the mineralization process by generating orthophosphate ions.

EXPERIMENTS

We report a thorough investigation on the mechanism of enzyme-induced mineralization in homogenous phase (enzymatic procedure). For this purpose, ALP is introduced in Ca²⁺/Mg²⁺-containing solution (pH = 7.4; 37 °C), and its activity modulated by the concentration of its substrate.

FINDINGS

Results show that after 24 h of mineralization both chemical and enzymatic procedures lead to the formation of well-crystalline hydroxyapatite nano-objects, however with noticeable impact on their shape and dimensions. Remarkably enough, by combining in situ monitoring and ex situ characterizations, we identify several intermediate phases, including amorphous phase, dicalcium phosphate dehydrate phase (DCPD or brushite) and Whitlockite (WH). Besides, mineralized nano-objects with a core-shell structure is observed, and hydroxyapatite platelets are shown to grow on the surface of their shell.

Effect of age on biomaterial-mediated in situ bone tissue regeneration

Emerging studies show the potential application of synthetic biomaterials that are intrinsically osteoconductive and osteoinductive as bone grafts to treat critical bone defects. Here, the biomaterial not only assists recruitment of endogenous cells, but also supports cellular activities relevant to bone tissue formation and function. While such biomaterial-mediated in situ tissue engineering is highly attractive, success of such an approach relies largely on the regenerative potential of the recruited cells, which is anticipated to vary with age. In this study, we investigated the effect of the age of the host on mineralized biomaterial-mediated bone tissue repair using critical-sized cranial defects as a model system. Mice of varying ages, 1-month-old (juvenile), 2-month-old (young-adult), 6-month-old (middle-aged), and 14-month-old (elderly), were used as recipients. Our results show that the bio-mineralized scaffolds support bone tissue formation by recruiting endogenous cells for all groups albeit with differences in an age-related manner. Analyses of bone tissue formation after 2 and 8 weeks post-treatment show low mineral deposition and reduced number of osteocalcin and tartrate-resistant acid phosphatase (TRAP)-expressing cells in elderly mice.

STATEMENT OF SIGNIFICANCE

Tissue engineering strategies that promote tissue repair through recruitment of endogenous cells will have a significant impact in regenerative medicine. Previous studies from our group have shown that biomineralized materials containing calcium phosphate minerals can contribute to neo-bone tissue through recruitment and activation of endogenous cells. In this study, we investigated the effect of age of the recipient on biomaterial-mediated bone tissue repair. Our results show that the age of the recipient mouse had a significant impact on the quality and quantity of the engineered neo-bone tissues, in which delayed/compromised bone tissue formation was observed in older mice. These findings are in agreement with the clinical observations that age of patients is a key factor in bone repair.

Alginate/poly(amidoamine) injectable hybrid hydrogel for cell delivery

A covalently cross-linked injectable hybrid hydrogel, namely, alginate/poly(amidoamine) (PAMAM), with the objective of cell delivery was innovatively designed and synthesized using tetra-amino-functional PAMAM dendrimer as the cross-linker. With the increase in percentage of PAMAM cross-linker, the pore size and swelling ratio of hydrogels were in the range of 57 ± 18 μm to 88 ± 25 μm and 110 ± 16 to 157 ± 20, respectively. The study of attachment and proliferation of MC3T3-E1 pre-osteoblasts using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay through indirect and direct contact methods indicated a continuous increase in metabolically active live cells with time, implying non-cytotoxicity of the synthesized hydrogel. The live–dead assay showed >95% of live cells for alginate/PAMAM hydrogels, suggesting viability of the encapsulated cells. When the percentage of PAMAM cross-linker in alginate/PAMAM hydrogel was increased from 5 to 25, the percentage degradation rate decreased from 1.1 to 0.29%/day. Given that the poly(ethylene glycol) is commonly used cross-linker for hydrogel syntheses, we compared the behavior with poly(ethylene glycol). The incorporation of poly(ethylene glycol) in alginate/PAMAM hydrogel reduced the activity of MC3T3-E1 cells and their viability compared to the alginate/PAMAM hydrogels. The protonation of amino groups in alginate/PAMAM injectables under physiological conditions led to the formation of cationic hydrogels. These cationic hydrogels showed enhanced cell encapsulation and attachment ability because of electrostatic interaction with negatively charged cell surface as determined by cell adhesion and extensions from scanning electron microscope and vinculin assay and ability of in situ calcium phosphate mineralization. These observations point toward the potential use as an injectable scaffold for cell delivery and tissue engineering applications.

EDTA and NTA Effectively Tune the Mineralization of Calcium Phosphate from Bulk Aqueous Solution

This study describes the effects of nitrilotriacetic acid (NTA) and ethylenediaminotetraacetic acid (EDTA) on the mineralization of calcium phosphate from bulk aqueous solution. Mineralization was performed between pH 6 and 9 and with NTA or EDTA concentrations of 0, 5, 10, and 15 mM. X-ray diffraction and infrared spectroscopy show that at low pH, mainly brushite precipitates and at higher pH, mostly hydroxyapatite forms. Both additives alter the morphology of the precipitates. Without additive, brushite precipitates as large plates. With NTA, the morphology changes to an unusual rod-like shape. With EDTA, the edges of the particles are rounded and disk-like particles form. Conductivity and pH measurements suggest that the final products form through several intermediate steps.

A Dendritic Amphiphile for Efficient Control of Biomimetic Calcium Phosphate Mineralization

The phase behavior of a dendritic amphiphile containing a Newkome-type dendron as the hydrophilic moiety and a cholesterol unit as the hydrophobic segment is investigated at the air-liquid interface. The amphiphile forms stable monomolecular films at the air-liquid interface on different subphases. Furthermore, the mineralization of calcium phosphate beneath the monolayer at different calcium and phosphate concentrations versus mineralization time shows that at low calcium and phosphate concentrations needles form, whereas flakes and spheres dominate at higher concentrations. Energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and electron diffraction confirm the formation of calcium phosphate. High-resolution transmission electron microscopy and electron diffraction confirm the predominant formation of octacalcium phosphate and hydroxyapatite. The data also indicate that the final products form via a complex multistep reaction, including an association step, where nano-needles aggregate into larger flake-like objects.

Alginate/nanohydroxyapatite scaffolds with designed core/shell structures fabricated by 3D plotting and in situ mineralization for bone tissue engineering

Composite scaffolds, especially polymer/hydroxyapatite (HAP) composite scaffolds with predesigned structures, are promising materials for bone tissue engineering. Various methods including direct mixing of HAP powder with polymers or incubating polymer scaffolds in simulated body fluid for preparing polymer/HAP composite scaffolds are either uncontrolled or require long times of incubation. In this work, alginate/nano-HAP composite scaffolds with designed pore parameters and core/shell structures were fabricated using 3D plotting technique and in situ mineralization under mild conditions (at room temperature and without the use of any organic solvents). Light microscopy, scanning electron microscopy, microcomputer tomography, X-ray diffraction, and Fourier transform infrared spectroscopy were applied to characterize the fabricated scaffolds. Mechanical properties and protein delivery of the scaffolds were evaluated, as well as the cell response to the scaffolds by culturing human bone-marrow-derived mesenchymal stem cells (hBMSC). The obtained data indicate that this method is suitable to fabricate alginate/nano-HAP composite scaffolds with a layer of nano-HAP, coating the surface of the alginate strands homogeneously and completely. The surface mineralization enhanced the mechanical properties and improved the cell attachment and spreading, as well as supported sustaining protein release, compared to pure alginate scaffolds without nano-HAP shell layer. The results demonstrated that the method provides an interesting option for bone tissue engineering application.

Advances in synthesis of calcium phosphate crystals with controlled size and shape

Calcium phosphate (CaP) materials have a wide range of applications, including biomaterials, adsorbents, chemical engineering materials, catalysts and catalyst supports and mechanical reinforcements. The size and shape of CaP crystals and aggregates play critical roles in their applications. The main inorganic building blocks of human bones and teeth are nanocrystalline CaPs; recently, much progress has been made in the application of CaP nanocrystals and their composites for clinical repair of damaged bone and tooth. For example, CaPs with special micro- and nanostructures can better imitate the biomimetic features of human bone and tooth, and this offers significantly enhanced biological performances. Therefore, the design of CaP nano-/microcrystals, and the shape and hierarchical structures of CaPs, have great potential to revolutionize the field of hard tissue engineering, starting from bone/tooth repair and augmentation to controlled drug delivery devices. Previously, a number of reviews have reported the synthesis and properties of CaP materials, especially for hydroxyapatite (HAp). However, most of them mainly focused on the characterizations and physicochemical and biological properties of HAp particles. There are few reviews about the control of particle size and size distribution of CaPs, and in particular the control of nano-/microstructures on bulk CaP ceramic surfaces, which is a big challenge technically and may have great potential in tissue engineering applications. This review summarizes the current state of the art for the synthesis of CaP crystals with controlled sizes from the nano- to the macroscale, and the diverse shapes including the zero-dimensional shapes of particles and spheres, the one-dimensional shapes of rods, fibers, wires and whiskers, the two-dimensional shapes of sheets, disks, plates, belts, ribbons and flakes and the three-dimensional (3-D) shapes of porous, hollow, and biomimetic structures similar to biological bone and tooth. In addition, this review will also summarize studies on the controlled formation of nano-/microstructures on the surface of bulk ceramics, and the preparation of macroscopical bone grafts with 3-D architecture nano-/microstructured surfaces. Moreover, the possible directions of future research and development in this field, such as the detailed mechanisms behind the size and shape control in various strategies, the importance of theoretical simulation, self-assembly, biomineralization and sacrificial precursor strategies in the fabrication of biomimetic bone-like and enamel-like CaP materials are proposed.

New developments in polymer-controlled, bioinspired calcium phosphate mineralization from aqueous solution

The polymer-controlled and bioinspired precipitation of inorganic minerals from aqueous solution at near-ambient or physiological conditions avoiding high temperatures or organic solvents is a key research area in materials science. Polymer-controlled mineralization has been studied as a model for biomineralization and for the synthesis of (bioinspired and biocompatible) hybrid materials for a virtually unlimited number of applications. Calcium phosphate mineralization is of particular interest for bone and dental repair. Numerous studies have therefore addressed the mineralization of calcium phosphate using a wide variety of low- and high-molecular-weight additives. In spite of the growing interest and increasing number of experimental and theoretical data, the mechanisms of polymer-controlled calcium phosphate mineralization are not entirely clear to date, although the field has made significant progress in the last years. A set of elegant experiments and calculations has shed light on some details of mineral formation, but it is currently not possible to preprogram a mineralization reaction to yield a desired product for a specific application. The current article therefore summarizes and discusses the influence of (macro)molecular entities such as polymers, peptides, proteins and gels on biomimetic calcium phosphate mineralization from aqueous solution. It focuses on strategies to tune the kinetics, morphologies, final dimensions and crystal phases of calcium phosphate, as well as on mechanistic considerations.

Double-Hydrophilic Block Copolymer as an Effective and Environmentally Friendly Inhibitor for Phosphate and Carbonate Scales in Cooling Water Systems

In this paper, a series of linear-dendritic block copolymers allyloxy poly(ethylene glycol) polyglycerol (APEG-PG-(OH)n) copolymer, was synthesized by anionic polymerization of glycerol using allyloxy poly(ethylene glycol) (APEG). The polymers were characterized by FT-IR and 1H NMR. The polymers were tested as novel environment-friendly inhibitors for industrial cooling water circulation. The performance of AA/APEG-PG-(OH)n on inhibition of calcium phosphate and calcium carbonate precipitation was studied by static scale inhibition tests. It was shown that AA/APEG-PG-(OH)n exhibited excellent ability to control inorganic minerals, with approximately 99 % calcium phosphate inhibition and 85 % calcium carbonate inhibition at levels of 4 and 10 mg/L AA/APEG-PG-(OH)n, respectively. The effect on formation of calcium phosphate and calcium carbonate was investigated with combination of scanning electronic microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) analysis, respectively.

Hydroxylapatite nanoparticles: fabrication methods and medical applications

Hydroxylapatite (or hydroxyapatite, HAp) exhibits excellent biocompatibility with various kinds of cells and tissues, making it an ideal candidate for tissue engineering, orthopedic and dental applications. Nanosized materials offer improved performances compared with conventional materials due to their large surface-to-volume ratios. This review summarizes existing knowledge and recent progress in fabrication methods of nanosized (or nanostructured) HAp particles, as well as their recent applications in medical and dental fields. In section 1, we provide a brief overview of HAp and nanoparticles. In section 2, fabrication methods of HAp nanoparticles are described based on the particle formation mechanisms. Recent applications of HAp nanoparticles are summarized in section 3. The future perspectives in this active research area are given in section 4.

Calcium phosphate mineralization beneath a polycationic monolayer at the air-water interface

The self-assembly of the amphiphilic block copolymer poly(n-butyl methacrylate)-block-poly[2-(dimethylamino)ethyl methacrylate] at the air-water interface has been investigated at different pH values. Similar to Rehfeldt et al. (J. Phys. Chem. B 2006, 110, 9171), the subphase pH strongly affects the monolayer properties. The formation of calcium phosphate beneath the monolayer can be tuned by the subphase pH and hence the monolayer charge. After 12 h of mineralization at pH 5, the polymer monolayers are still transparent, but transmission electron microscopy (TEM) shows that very thin calcium phosphate fibers form, which aggregate into cotton ball-like features with diameters of 20 to 50 nm. In contrast, after 12 h of mineralization at pH 8, the polymer film is very slightly turbid and TEM shows dense aggregates with sizes between 200 and 700 nm. The formation of calcium phosphate is further confirmed by Raman and energy dispersive X-ray spectroscopy. The calcium phosphate architectures can be assigned to the monolayer charge, which is high at low pH and low at high pH. The study demonstrates that the effects of polycations should not be ignored if attempting to understand the colloid chemistry of biomimetic mineralization. It also shows that basic block copolymers are useful complementary systems to the much more commonly studied acidic block copolymer templates.

Templated mineralization of synthetic hydrogels for bone-like composite materials: role of matrix hydrophobicity

Bone-mimetic mineral-polymer composite materials have several applications ranging from artificial bone grafts to scaffolds for bone tissue engineering; templated mineralization is an effective approach to fabricate such composites. In this study, we synthesized bone-like composites using synthetic hydrogels having pendant side chains terminating with carboxyl groups as a template for mineralization. The role of matrix hydrophobicity on mineralization was examined using poly(ethylene glycol) hydrogels modified with varying lengths of anionic pendant side chains (CH(2) horizontal lineCHCONH(CH(2))(n)COOH, where n = 1, 3, 5, and 7). The ability of these hydrogels to undergo templated mineralization was found to be strongly dependent upon the length of the pendant side chain as is evident from the extent of calcification and morphology of the minerals. Moreover, mineralized phases formed on the hydrogels were confirmed to resemble apatite-like structures. In addition to demonstrating the importance of material hydrophobicity as a design parameter for the development of bone-like synthetic materials, our study also provides a potential explanation for the in vitro differences between the apatite-nucleating capacity of aspartate-rich osteopontin and glutamate-rich bone sialoprotein.

Calcium phosphate growth beneath a polycationic monolayer at the air-water interface: effects of oscillating surface pressure on mineralization

The self-assembly of the amphiphilic block copolymer poly(butadiene)-block-poly[2-(dimethylamino)ethyl methacrylate] at the air-water interface and the mineralization of the monolayers with calcium phosphate was investigated at different pH values. As expected for polyelectrolytes, the subphase pH strongly affects the monolayer properties. The focus of the current study, however, is on the effect of an oscillating (instead of a static) polymer monolayer on calcium phosphate mineralization. Monitoring of the surface pressure vs. mineralization time shows that the monolayer is quite stable if the mineralization is performed at pH 8. In contrast, the monolayer at pH 5 shows a measurable decrease of the surface pressure already after ca. 2 h of mineralization. Transmission electron microscopy reveals that mineralization at low pH under constant oscillation leads to small particles, which are arranged in circular features and larger entities with holes of ca. 200 nm. The larger features with the holes disappear as the mineralization is continued in favor of the smaller particles. These grow with time and form necklace-like architectures of spherical particles with a uniform diameter. In contrast, mineralization at pH 8 leads to very uniform particle morphologies already after 2 h. The mineralization products consist of a circular feature with a dark dot in the center. The increasing contrast of the precipitates in the electron micrographs with mineralization time indicates an increasing degree of mineralization vs. reaction time. The study therefore shows that mechanical effects on mineralization at interfaces are quite complex.

Preparation, characterization, and thermal gelation of amphiphilic alkyl-poly(ethyleneimine)

Amphiphilic alkyl-poly(ethyleneimine)s (alkyl-PEI) with different degrees of polymerization have been produced by alkaline hydrolysis of alkyl-poly(2-methyl-2-oxazoline). Potentiometric titration of the alkyl-PEI shows the influence of the alkyl chain and the degree of polymerization on the titration curves and hence on the polymer conformation. Karl Fischer titration has been used to determine the water content in the polymers. Subsequent X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) measurements prove the existence of different hydration states of the PEI even under dry storage conditions. Upon cooling from hot aqueous solutions, hydrogels form. The gelation concentration decreases with increasing degree of polymerization of the PEI segment. Scanning electron microscopy (SEM and cryo-SEM) of the hydrogels reveal an alkyl-PEI fibrous network composed of fan-like units. DSC shows that the percentages of bound and free water in the hydrogels depend on the concentration of polar amino groups.