New route for the preparation of Pd and PdAu nanoparticles using photoexcited Ti-containing zeolite as an efficient support material and investigation of their catalytic properties

Composite Photocatalysts with Fe, Co, and Ni Oxides on Supports with Tetracoordinated Ti Embedded into Aluminosilicate Gel during Zeolite Y Synthesis

Ti-aluminosilicate gels were used as supports for the immobilization of Fe, Co, and Ni oxides (5%) by impregnation and synthesis of efficient photocatalysts for the degradation of β-lactam antibiotics from water. Titanium oxide (1 and 2%) was incorporated into the zeolite network by modifying the gel during the zeolitization process. The formation of the zeolite Y structure and its microporous structure were evidenced by X-ray diffraction and N2 physisorption. The structure, composition, reduction, and optical properties were studied by X-ray diffraction, H2-TPR, XPS, Raman, photoluminescence, and UV-Vis spectroscopy. The obtained results indicated a zeolite Y structure for all photocatalysts with tetracoordinated Ti4+ sites. The second transitional metals supported by the post-synthesis method were obtained in various forms, such as oxides and/or in the metallic state. A red shift of the absorption edge was observed in the UV-Vis spectra of photocatalysts upon the addition of Fe, Co, or Ni species. The photocatalytic performances were evaluated for the degradation of cefuroxime in water under visible light irradiation. The best results were obtained for iron-immobilized photocatalysts. Scavenger experiments explained the photocatalytic results and their mechanisms. A different contribution of the active species to the photocatalytic reactions was evidenced.

Functionalized mesoporous SBA-15 silica: recent trends and catalytic applications

The development of advanced materials for heterogeneous catalytic applications requires fine control over the synthesis and structural parameters of the active site. Mesoporous silica materials have attracted increasing attention to be considered as an important class of nanostructured support materials in heterogeneous catalysis. Their large surface area, well-defined porous architecture and ability to incorporate metal atoms within the mesopores lead them to be a promising support material for designing a variety of different catalysts. In particular, SBA-15 mesoporous silica has its broad applicability in catalysis because of its comparatively thicker walls leading to higher thermal and mechanical stability. In this review article, various strategies to functionalize SBA-15 mesoporous silica have been reviewed with a view to evaluating its efficacy in different catalytic transformation reactions. Special attention has been given to the molecular engineering of the silica surface, within the framework and within the hexagonal mesoporous channels for anchoring metal oxides, single-site species and metal nanoparticles (NPs) serving as catalytically active sites.

Removal of Pharmaceutical Contaminants in Wastewater Using Nanomaterials: A Comprehensive Review

BACKGROUND

The limitless presence of pharmaceutical contaminants in discharged wastewater has emerged as a threat to aquatic species and humans. Their presence in drinking water has although raised substantial concerns, very little is known about the fate and ecological impacts of these pollutants. As a result, these pollutants are inevitably introduced to our food chain at trace concentrations. Unfortunately, the conventional wastewater treatment techniques are unable to treat pharmaceuticals completely with practical limitations. The focus has now been shifted towards nanotechnology for the successful remediation of these persistent pollutants. Thus, the current review specifically focuses on providing readers brief yet sharp insights into applications of various nanomaterials for the removal of pharmaceutical contaminants.

METHODS

An exhaustive collection of bibliographic database was done with articles having high impact and citations in relevant research domains. An in-depth analysis of screened papers was done through standard tools. Studies were categorized according to the use of nanoscale materials as nano-adsorbents (graphene, carbon nanotubes), nanophotocatalysts (metal, metal oxide), nano-filtration, and ozonation for promising alternative technologies for the efficient removal of recalcitrant contaminants.

RESULTS

A total of 365 research articles were selected. The contemporary advancements in the field of nanomaterials for drinking and wastewater treatment have been thoroughly analyzed along with their future perspectives.

CONCLUSION

The recommendations provided in this article will be useful to adopt novel strategies for on-site removal of the emerging contaminants in pharmaceutical effluents and related industries.

The stability of Pd/TS-1 and Pd/silicalite-1 for catalytic oxidation of methane – understanding the role of titanium

The stability of Pd/TS-1 and Pd/silicalite-1 catalysts was assessed at 400 °C and an approximate relative humidity (RH) of 80% for catalytic combustion of fugitive methane emissions, aiming to understand the role of titanium in the stability of the catalysts.

Design of Advanced Functional Materials Using Nanoporous Single-Site Photocatalysts

Nanoporous silica solids can offer opportunities for hosting photocatalytic components such as various tetra-coordinated transition metal ions to form systems referred to as "single-site photocatalysts". Under UV/visible-light irradiation, they form charge transfer excited states, which exhibit a localized charge separation and thus behave differently from those of bulk semiconductor photocatalysts exemplified by TiO₂ . This account presents an overview of the design of advanced functional materials based on the unique photo-excited mechanisms of single-site photocatalysts. Firstly, the incorporation of single-site photocatalysts within transparent porous silica films will be introduced, which exhibit not only unique photocatalytic properties, but also high surface hydrophilicity with self-cleaning and antifogging applications. Secondary, photo-assisted deposition (PAD) of metal precursors on single-site photocatalysts opens up a new route to prepare nanoparticles. Thirdly, visible light sensitive photocatalysts with single and/or binary oxides moieties can be prepared so as to use solar light, the ideal energy source.

Molybdenum-Incorporated Mesoporous Silica: Surface Engineering toward Enhanced Metal-Support Interactions and Efficient Hydrogenation

In heterogeneous catalysis, strong metal-support interactions are highly desired to improve catalytic turnover on metal catalysts. Herein, molybdenum is uniformly incorporated into mesoporous silica (KIT-6) to accomplish strong interactions with iridium catalysts, and consequently, active and selective hydrogenation of carbonyl compounds. Mo-incorporated KIT-6 (Mo-KIT-6) affords electronic interactions to improve the proportion of metallic Ir⁰ species, avoiding the easy surface oxidation of ultrafine metals in silica mesocavities. Owing to the effective H₂ activation and subsequent hydrogenation on metallic Ir⁰ sites, optimal Ir/Mo-KIT-6 with a high Ir⁰/Ir^δ+ ratio delivers prominent performance in the hydrogenation of amides to amines and α,β-unsaturated aldehydes to unsaturated alcohols. As for N-acetylmorpholine hydrogenation, the Ir/Mo-KIT-6 catalyst achieves efficient turnover toward N-ethylmorpholine with high selectivity (>99%) and exhibits activity that relies on the engineered chemical state of Ir sites. Such promotion is further proved to be universal in cinnamaldehyde hydrogenation. This work will provide new opportunities for catalyst design through surface/interface engineering.

Single-site and nano-confined photocatalysts designed in porous materials for environmental uses and solar fuels

Silica-based micro-, meso-, macro-porous materials offer attractive routes for designing single-site photocatalysts, supporting semiconducting nanoparticles, anchoring light-responsive metal complexes, and encapsulating metal nanoparticles to drive photochemical reactions by taking advantage of their large surface area, controllable pore channels, remarkable transparency to UV/vis and tailorable physicochemical surface characteristics. This review mainly focuses on the fascinating photocatalytic properties of silica-supported Ti catalysts from single-site catalysts to nanoparticles, their surface-chemistry engineering, such as the hydrophobic modification and synthesis of thin films, and the fabrication of nanocatalysts including morphology controlled plasmonic nanostructures with localized surface plasmon resonance. The hybridization of visible-light responsive metal complexes with porous materials for the construction of functional inorganic-organic supramolecular photocatalysts is also included. In addition, the latest progress in the application of MOFs as excellent hosts for designing photocatalytic systems is described.

Phenylamine-functionalized mesoporous silica supported PdAg nanoparticles: a dual heterogeneous catalyst for formic acid/CO2-mediated chemical hydrogen delivery/storage

PdAg nanoparticles supported on phenylamine-grafted mesoporous silica acted as a dual heterogeneous catalyst for the interconversion of H₂ and CO₂.

A carbon nitride supported copper nanoparticle composite: a heterogeneous catalyst for the N-arylation of hetero-aromatic compounds

Copper nanoparticle catalyzed N-arylation of hetero-aromatic molecules.

Towards understanding the improved stability of palladium supported on TS-1 for catalytic combustion

A novel TS-1 supported Pd catalyst was synthesized and tested in methane combustion under very lean (<1%) and humid conditions.

Design and functionalization of photocatalytic systems within mesoporous silica

In the past decades, various photocatalysts such as TiO2, transition-metal-oxide moieties within cavities and frameworks, or metal complexes have attracted considerable attention in light-excited catalytic processes. Owing to high surface areas, transparency to UV and visible light as well as easily modified surfaces, mesoporous silica-based materials have been widely used as excellent hosts for designing efficient photocatalytic systems under the background of environmental remediation and solar-energy utilization. This Minireview mainly focuses on the surface-chemistry engineering of TiO2/mesoporous silica photocatalytic systems and fabrication of binary oxides and nanocatalysts in mesoporous single-site-photocatalyst frameworks. Recently, metallic nanostructures with localized surface plasmon resonance (LSPR) have been widely studied in catalytic applications harvesting light irradiation. Accordingly, silver and gold nanostructures confined in mesoporous silica and their corresponding catalytic activity enhanced by the LSPR effect will be introduced. In addition, the integration of metal complexes within mesoporous silica materials for the construction of functional inorganic-organic supramolecular photocatalysts will be briefly described.

Synthesis and unique catalytic performance of single-site Ti-containing hierarchical macroporous silica with mesoporous frameworks

Single-site Ti-containing hierarchical macroporous silica with mesoporous frameworks (Ti-MMS) was successfully prepared by a solvent evaporation method using organic surfactant and poly(methyl methacrylate) (PMMA) colloidal crystals as the template. The formation of a well-defined macroporous structure composed of mesoporous silica walls was characterized by SEM and TEM observations. The successful incorporation of tetrahedrally coordinated Ti oxide moieties within their frameworks was also confirmed by spectroscopic techniques such as UV-vis and XAFS measurements. Comparative studies revealed that Ti-MMS exhibited higher catalytic activities for the epoxidation of linear α-olefin compared to Ti-containing mesoporous silica without macropores (Ti-MS). The reaction rate was significantly enhanced on Ti-MMS depending on increases in the alkyl chain length of linear α-olefins. It was also found that Ti-MMS showed good catalytic performance in the selective epoxidation of methyl oleate, which is a kind of unsaturated fatty acid methyl ester (FAME), under acid-free reaction conditions with tert-butylhydroperoxide (TBHP) because of the advantages of the combination of hierarchical macroporous and mesoporous structures.