Defects, Solvent Quality, and Photonic Response in Lamellar Block Copolymer Gels

Bioinspired Colorimetric Double Inverse Opal Photonic Crystal Indicators for Ethanol Concentration Sensing in Fermentation Engineering

Photonic crystal-based ethanol concentration indicators with rapid response and brilliant structural color output definitely take a place in colorimetric sensors. Here, based on the H-bond-regulated swelling of acrylate shape memory polymers (SMPs) and the solvent-induced structural color change of the double inverse opal photonic crystals (DIOPCs), new-type photonic crystals (PCs) colorimetric indicators were constructed, exhibiting a span of maximum reflection wavelength (λmax) up to ∼166 nm in response to alcohols with concentrations from 0 to 100 vol %. DIOPC indicators (DIOPCIs) show a rapid response to alcohols (<1.5 s) and output different structural colors (covering from blue to red). The colorimetric sensing mechanism includes the solvent-triggered recovery of the inverse opal skeleton, the cosolvency effect and H-bonds induced swelling/shrinkage of the polymer, the phase separation between polystyrene (PS) microsphere and polymer skeleton, and the light diffraction of DIOPCs. While ensuring a larger λmax span by regulating the H-bond interactions in polymer chains through acrylamide (AAm), AAm-modified DIOPCIs are sensitive to some specific ethanol concentrations. The real-time sensing of ethanol concentration during fermentation verified the practicability of DIOPCIs, thus establishing a visual model between structural color and corresponding fermentation kinetics. We envisage that the DIOPCIs will contribute to the intelligentization of the alcoholic fermentation and distillation industry.

Robust Full-Spectral Color Tuning of Photonic Colloids

Creation of color through photonic morphologies manufactured by molecular self-assembly is a promising approach, but the complexity and lack of robustness of the fabrication processes have limited their technical exploitation. Here, it is shown that photonic spheres with full-color tuning across the entire visible spectrum can be readily and reliably achieved by the emulsification of solutions containing a block copolymer (BCP) and two swelling additives. Solvent diffusion out of the emulsion droplets gives rise to 20-150 µm-sized spheres with an onion-like lamellar morphology. Controlling the lamellar thickness by differential swelling with the two additives enables color tuning of the Bragg interference-based reflection band across the entire visible spectrum. By studying five different systems, a set of important principles for manufacturing photonic colloids is established. Two swelling additives are required, one of which must exhibit strong interactions with one of the BCP blocks. The additives should be chosen to enhance the dielectric contrast, and the formation kinetics of the spheres must be sufficiently slow to enable the emergence of the photonic morphology. The proposed approach is versatile and robust and allows the scalable production of photonic pigments with possible future applications in inks for cosmetics and arts, coatings, and displays.

Interactive structural color displays of nano-architectonic 1-dimensional block copolymer photonic crystals: FOCUS ISSUE REVIEW

For changing environmental circumstances, interactive structural color (SC) observation is a promising strategy to store and express external information. SCs based on self-assembled block copolymer (BCP) photonic crystals have been a research focus due to their facile and diverse nanostructures relying on the volume ratio of blocks. Their unique nano-architectonics can reflect incident light due to constructive interference of the two different dielectric constituents. Their excellent ability to change nano-architectonics in response to external stimuli (i.e. humidity, temperature, pH, and mechanical force) allows for a programmable and stimuli-interactive BCP SC display. In this review, recent advances in programmable and stimuli-interactive SC displays with the 1-dimensional self-assembled BCP nano-architectonics are comprehensively discussed. First, this review focuses on the development of programmable BCP SCs that can store various information. Second, stimuli-interactive BCP SCs capable of responding reversibly to external stimuli are also addressed. Particularly, reversible BCP SC changes are suitable for rewritable displays and emerging human-interactive BCP SC displays that detect various human information through changes in electric signals with the simultaneous alteration of the BCP SCs. Based on previously reported literature, the current challenges in this research field are further discussed, and the perspective for future development is presented in terms of material, nano-architectonics, and process.

The Limited Palette for Photonic Block-Copolymer Materials: A Historical Problem or a Practical Limitation?

Block-copolymer self-assembly has proven to be an effective route for the fabrication of photonic films and, more recently, photonic pigments. However, despite extensive research on this topic over the past two decades, the palette of monomers and polymers employed to produce such structurally colored materials has remained surprisingly limited. In this Scientific Perspective, the commonly used block-copolymer systems reported in the literature are summarized (considering both linear and brush architectures) and their use is rationalized from the point of view of both their historical development and physicochemical constraints. Finally, the current challenges facing the field are discussed and promising new areas of research are highlighted to inspire the community to pursue new directions.

The Limited Palette for Photonic Block-Copolymer Materials: A Historical Problem or a Practical Limitation?

Block-copolymer self-assembly has proven to be an effective route for the fabrication of photonic films and, more recently, photonic pigments. However, despite extensive research on this topic over the past two decades, the palette of monomers and polymers employed to produce such structurally colored materials has remained surprisingly limited. In this Scientific Perspective, the commonly used block-copolymer systems reported in the literature are summarized (considering both linear and brush architectures) and their use is rationalized from the point of view of both their historical development and physicochemical constraints. Finally, the current challenges facing the field are discussed and promising new areas of research are highlighted to inspire the community to pursue new directions.

Visualization of nonsingular defect enabling rapid control of structural color

Stimuli-interactive structural color (SC) of a block copolymer (BCP) photonic crystal (PC) uses reversible alteration of the PC using external fluids and applied forces. The origin of the diffusional pathways of a stimulating fluid into a BCP PC has not been examined. Here, we directly visualize the vertically oriented screw dislocations in a one-dimensional lamellar BCP PC that facilitate the rapid response of visible SC. To reveal the diffusional pathway of the solvent via the dislocations, BCP lamellae are swollen with an interpenetrated hydrogel network, allowing fixation of the swollen state and subsequent microscopic examination. The visualized defects are low-energy helicoidal screw dislocations having unique, nonsingular cores. Location and areal density of these dislocations are determined by periodic concentric topographic nanopatterns of the upper surface-reconstructed layer. The nonsingular nature of the interlayer connectivity in the core region demonstrates the beneficial nature of these defects on sensing dynamics.

3D touchless multiorder reflection structural color sensing display

The development of a lightweight, low-power, user-interactive three-dimensional (3D) touchless display in which a human stimulus can be detected and simultaneously visualized in noncontact mode is of great interest. Here, we present a user-interactive 3D touchless sensing display based on multiorder reflection structural colors (SCs) of a thin, solid-state block copolymer (BCP) photonic crystal (PC). Full-visible-range SCs are developed in a BCP PC consisting of alternating lamellae, one of which contains a chemically cross-linked, interpenetrated hydrogel network. The absorption of a nonvolatile ionic liquid into the domains of the interpenetrated network allows for further manipulation of SC by using multiple-order photonic reflections, giving rise to unprecedented visible SCs arising from reflective color mixing. Furthermore, by using a hygroscopic ionic liquid ink, a printable 3D touchless interactive display is created where 3D position of a human finger is efficiently visualized in different SCs as a function of finger-to-display distance.

One-Step Anionic Copolymerization Enables Formation of Linear Ultrahigh-Molecular-Weight Block Copolymer Films Featuring Vivid Structural Colors in the Bulk State

Ultrahigh-molecular-weight (UHMW) tapered block copolymers (BCPs) consisting of polyisoprene- block-poly(4-methylstyrene) featuring overall molar masses in the range of 1101-2033 kg mol^-1 ( M_w) are synthesized via a convenient one-step anionic copolymerization protocol. The obtained UHMW BCPs are investigated by differential scanning calorimetry, size exclusion chromatography, and ¹H NMR spectroscopy. Microphase separation for the UHMW BCPs in the bulk state is investigated by transmission electron microscopy (TEM) measurements and scanning electron microscopy (SEM), revealing well-ordered lamellar and spherical domains with large domain sizes in the range of 100-200 nm. Excellent order and periodicity are observed for lamellar morphologies over large film areas of 90 × 120 μm. Because of this high order of the underlying domains and the different refractive indices of the block segments, vivid structural colors can be observed in the bulk state. Structural colors of BCP films are investigated by angle-dependent UV/vis measurements, revealing intensive reflection colors according to Bragg's law of diffraction. The optical characteristics are directly correlated to TEM and SEM results. Moreover, colored BCP films featuring spherical domains for one block segment with domain sizes of 97-122 nm revealed blue structural colors stemming from disordered particle scattering.

Printable and Rewritable Full Block Copolymer Structural Color

Structural colors (SCs) of photonic crystals (PCs) arise from selective constructive interference of incident light. Here, an ink-jet printable and rewritable block copolymer (BCP) SC display is demonstrated, which can be quickly written and erased over 50 times with resolution nearly equivalent to that obtained with a commercial office ink-jet printer. Moreover, the writing process employs an easily modified printer for position- and concentration-controlled deposition of a single, colorless, water-based ink containing a reversible crosslinking agent, ammonium persulfate. Deposition of the ink onto a self-assembled BCP PC film comprising a 1D stack of alternating layers enables differential swelling of the written BCP film and produces a full-colored SC display of characters and images. Furthermore, the information can be readily erased and the system can be reset by application of hydrogen bromide. Subsequently, new information can be rewritten, resulting in a chemically rewritable BCP SC display.

Electrically Tunable Soft-Solid Block Copolymer Structural Color

One-dimensional photonic crystals based on the periodic stacking of two different dielectric layers have been widely studied, but the fabrication of mechanically flexible polymer structural color (SC) films, with electro-active color switching, remains challenging. Here, we demonstrate free-standing electric field tunable ionic liquid (IL) swollen block copolymer (BCP) films. Placement of a polymer/ionic liquid film-reservoir adjacent to a self-assembled poly(styrene-block-quaternized 2-vinylpyridine) (PS-b-QP2VP) copolymer SC film allowed the development of red (R), green (G), and blue (B) full-color SC block copolymer films by swelling of the QP2VP domains by the ionic liquid associated with water molecules. The IL-polymer/BCP SC film is mechanically flexible with excellent color stability over several days at ambient conditions. The selective swelling of the QP2VP domains could be controlled by both the ratio of the IL to a polymer in the gel-like IL reservoir layer and by an applied voltage in the range of -3 to +6 V using a metal/IL reservoir/SC film/IL reservoir/metal capacitor type device.

Responsive block copolymer photonics triggered by protein-polyelectrolyte coacervation

Ionic interactions between proteins and polyelectrolytes are demonstrated as a method to trigger responsive transitions in block copolymer (BCP) photonic gels containing one neutral hydrophobic block and one cationic hydrophilic block. Poly(2-vinylpyridine) (P2VP) blocks in lamellar poly(styrene-b-2-vinylpyridine) block copolymer thin films are quaternized with primary bromides to yield swollen gels that show strong reflectivity peaks in the visible range; exposure to aqueous solutions of various proteins alters the swelling ratios of the quaternized P2VP (QP2VP) gel layers in the PS-QP2VP materials due to the ionic interactions between proteins and the polyelectrolyte. Parameters such as charge density, hydrophobicity, and cross-link density of the QP2VP gel layers as well as the charge and size of the proteins play significant roles on the photonic responses of the BCP gels. Differences in the size and pH-dependent charge of proteins provide a basis for fingerprinting proteins based on their temporal and equilibrium photonic response. The results demonstrate that the BCP gels and their photonic effect provide a robust and visually interpretable method to differentiate different proteins.