Polydioxythiophene nanodots, nonowires, nano-networks, and tubular structures: the effect of functional groups and temperature in template-free electropolymerization

Recent advances in PEDOT/PProDOT-derived nano biosensors: engineering nano assemblies for fostering advanced detection platforms for biomolecule detection

With the recent unprecedented emergence of a global pandemic, unknown diseases and new metabolic patterns expressing serious health issues, the requirement to develop new diagnostic tools, therapeutic solutions, and healthcare and environmental monitoring systems are significantly higher in the present situation. Considering that high sensitivity, selectivity, stability and a low limit of detection (LOD) are inevitable requirements for an ideal biosensor, the class of conducting polymers of poly(3,4-ethylenedioxythiophene) (PEDOT) and recently poly(3,4-propylenedioxythiophene) (PProDOT) materials have been demonstrated to be promising candidates for designing sensor devices. Nanostructure engineering of these polymeric materials with tunable surface properties and side chain functionalization to enable sensor probe conjugation combined with signal amplification devices such as OECTs and OFETs can fulfil the requirements of next-generation smart nano-biosensors. In this review, we analyze recent reports on PEDOT/PProDOT nanostructures and nanocomposites for developing nano-biosensors and their application in the detection of different biomarkers, environmental, toxicology, marine and aquatic monitoring, forensic and illicit drug detection, etc. In addition, we discuss the challenges associated with the design of PEDOT/PProDOT nano-biosensors and future perspectives on the exploration of novel sensor platforms, particularly PProDOT derivatives for bioelectronics and novel design strategies for next-generation smart nano-biosensors.

Unraveling the Adhesion Behavior of Different Cell Lines on Biomimetic PEDOT Interfaces: The Role of Surface Morphology and Antifouling Properties

The poly(3,4-ethylenedioxythiophene) (PEDOT) interface, renowned for its biocompatibility and intrinsic conductivity, holds substantial potential in biosensing and cellular modulation. Through strategic functionalization, PEDOT derivatives can be adaptable for multifaceted applications. Notably, integrating phosphorylcholine (PC) groups into PEDOT, mimicking the hydrophilic headgroups from cell membranes, confers exceptional antifouling properties on the coating. This study systematically investigated biomolecule interactions with distinct forms of PEDOT, incorporating variations in surface modifications and structure. Zwitterionic PEDOT-PC was electropolymerized on smooth and nanostructured surfaces using various feeding ratios in electrolytes to finely control the antifouling properties of the interface. Precise electropolymerization conditions governed the attainment of smooth and nanostructured filamentous surfaces. The study employed a quartz crystal microbalance with dissipation (QCM-D) to assess protein binding behavior. Bovine serum albumin (BSA), lysozyme (LYZ), cytochrome c (cyt c), and fibronectin (FN) were used to evaluate their binding affinities for PEDOT films. FN, a pivotal extracellular matrix component, was included for connecting to cell adhesion behavior. Furthermore, the cellular adhesion behaviors on PEDOT interfaces were evaluated. Three cell lines─MG-63 osteosarcoma, HeLa cervical cancer, and fibroblast NIH/3T3 were examined. The presence of PC moieties significantly altered the adhesive response, including the number of attached cells, their morphologies, and nucleus shrinkage. MG-63 cells exhibited the highest tolerance for PC moieties. A feeding ratio of PEDOT-PC exceeding 70% resulted in cell apoptosis. This study contributes to understanding biomolecule adsorption on PEDOT surfaces of diverse morphologies and degrees of the antifouling moiety. Meanwhile, it also sheds light on the responses of various cell types.

Chemically revised conducting polymers with inflammation resistance for intimate bioelectronic electrocoupling

Conducting polymers offer attractive mixed ionic-electronic conductivity, tunable interfacial barrier with metal, tissue matchable softness, and versatile chemical functionalization, making them robust to bridge the gap between brain tissue and electronic circuits. This review focuses on chemically revised conducting polymers, combined with their superior and controllable electrochemical performance, to fabricate long-term bioelectronic implants, addressing chronic immune responses, weak neuron attraction, and long-term electrocommunication instability challenges. Moreover, the promising progress of zwitterionic conducting polymers in bioelectronic implants (≥4 weeks stable implantation) is highlighted, followed by a comment on their current evolution toward selective neural coupling and reimplantable function. Finally, a critical forward look at the future of zwitterionic conducting polymers for in vivo bioelectronic devices is provided.

Sensitive Detection of Sweat Cortisol Using an Organic Electrochemical Transistor Featuring Nanostructured Poly(3,4-Ethylenedioxythiophene) Derivatives in the Channel Layer

In this study, we examined the influence of functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) nanostructures decorated on the channel layer of an organic electrochemical transistor (OECT) for the detection of sweat cortisol, an adrenocorticosteroid stress hormone. The OECT device featured a bilayer channel confined by a PEDOT:polystyrenesulfonate (PSS) underlayer and a nanostructure-decorated upper layer engineered from the monomers EDOT-COOH and EDOT-EG3 through template-free electrochemical polymerization. This molecular design allowed antibody conjugation using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide/N-hydroxysulfosuccinimide coupling through the carboxylic acid side chain, with EDOT-EG3 known to minimize nonspecific binding of biomolecules. We also engineered an OECT device having a channel area without any nanostructures to gain insight into the effect of the nanostructures on cortisol sensing. Our new nanostructure-embedded OECT device facilitated real-time detection of cortisol at concentrations ranging from 1 fg/mL to 1 μg/mL with a detection limit of 0.0088 fg/mL with good linearity (R² = 0.9566), in addition to excellent selectivity toward cortisol among other structurally similar interfering compounds and high stability and reproducibility. With its rapid response for the detection of 100 ng/mL cortisol-spiked artificial sweat, this nanostructure-decorated OECT device has potential clinical practicality and utility in wearable sensors for future healthcare applications.

A trade-off between antifouling and the electrochemical stabilities of PEDOTs

Strong nonspecific protein/cell adhesion on conducting polymer (CP)-based bioelectronic devices can cause an increase in the impedance or the malfunction of the devices. Incorporating oligo(ethylene glycol) or zwitterionic functionalities with CPs has demonstrated superior performance in the reduction of nonspecific adhesion. However, there is no report on the evaluation of the antifouling stability of oligo(ethylene glycol) and zwitterion-functionalized CPs under electrical stimulation as a simulation of the real situation of device operation. Moreover, there is a lack of understanding of the correlation between the molecular structure of antifouling CPs and the antifouling and electrochemical stabilities of the CP-based electrodes. To address the aforementioned issue, we fabricated a platform with antifouling poly(3,4-ethylenedioxythiophene) (PEDOT) featuring tri(ethylene glycol), tetra(ethylene glycol), sulfobetaine, or phosphorylcholine (PEDOT-PC) to evaluate the stability of the antifouling/electrochemical properties of antifouling PEDOTs before and after electrical stimulation. The results reveal that the PEDOT-PC electrode not only exhibits good electrochemical stability, low impedance, and small voltage excursion, but also shows excellent resistance toward proteins and HAPI microglial cells, as a cell model of inflammation, after the electrical stimulation. The stable antifouling/electrochemical properties of zwitterionic PEDOT-PC may aid its diverse applications in bioelectronic devices in the future.

Transparent Conductive Silk Film with a PEDOT-OH Nano Layer as an Electroactive Cell Interface

Bioelectronics based on biomaterial substrates are advancing toward biomedical applications. As excellent conductors, poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives have been widely developed in this field. However, it is still a big challenge to obtain a functional layer with a good electroconductive property, transparency, and strong adhesion on the biosubstrate. In this work, poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PEDOT-OH) was chemically polymerized and deposited on the surface of a regenerated silk fibroin (RSF) film in an aqueous system. Sodium dodecyl sulfate (SDS) was used as the surfactant to form micelles which are beneficial to the polymer structure. To overcome the trade-off between transparency and the electroconductive property of the PEDOT-OH coating, a composite oxidant recipe of FeCl₃ and ammonium persulfate (APS) was developed. Through electrostatic interaction of oppositely charged doping ions, a well-organized conductive nanoscale coating formed and a transparent conductive RSF/PEDOT-OH film was produced, which can hardly be achieved in a traditional single oxidant system. The produced film had a sheet resistance (R_s) of 5.12 × 10⁴ Ω/square corresponding to a conductivity of 8.9 × 10^-2 S/cm and a maximum transmittance above 73% in the visible range. In addition, strong adhesion between PEDOT-OH and RSF and favorable electrochemical stability of the film were demonstrated. Desirable transparency of the film allowed real-time observation of live cells. Furthermore, the PEDOT-OH layer provided an improved environment for adhesion and differentiation of PC12 cells compared to the RSF surface alone. Finally, the feasibility of using the RSF/PEDOT-OH film to electrically stimulate PC12 cells was demonstrated.

Synthesis of MOF525/PEDOT Composites as Microelectrodes for Electrochemical Sensing of Dopamine

Dopamine (DA) is an important neurotransmitter responsible for the functions and activities of multiple systems in human. Electrochemical detection of DA has the advantages of fast analysis and cost-effectiveness, while a regular electrode probe is restricted to laboratory use because the probe size is too large to be suitable for an in vivo or in vitro analysis. In this study, we have developed porphyrin-based metal organic framework (MOF525) and poly(3,4-ethylenedioxythiophene) (PEDOT)-based composites to modify microelectrode for DA detection. Two types of PEDOT monomers with different functional groups were investigated in this study. By varying the monomer ratios, electrolyte concentrations, and electropolymerization temperature, it was found that the PEDOT monomer containing carboxylic group facilitated the formation of regular morphology during the electropolymerization process. The uniform morphology of the PEDOT promoted the electron transmission efficiency in the same direction, while the MOF525 provided a large reactive surface area for electrocatalysis of DA. Thus, the MOF525/PEDOT composite improved the sensitivity-to-noise ratio of DA signaling, where the sensitivity reached 11 nA/μM in a good linear range of 4–100 µM. In addition, porphyrin-based MOF could also increase the selectivity to DA against other common clinical interferences, such as ascorbic acid and uric acid. The as-synthesized microelectrode modified with MOF525/PEDOT in this study exhibited great potential in real time analysis.

Mechanotactic Activation of TGF-β by PEDOT Artificial Microenvironments Triggers Epithelial to Mesenchymal Transition

Epithelial to mesenchymal transition (EMT) is integral for cells to acquire metastatic properties, and ample evidence links it to bioorganic framework of the tumor microenvironment (TME). Hydroxymethyl-functionalized 3,4-ethylenedioxythiophene polymer (PEDOT-OH) enables construction of diverse nanotopography size and morphologies and is therefore exploited to engineer organic artificial microenvironments bearing nanodots from 300 to 1000 nm in diameter to understand spatiotemporal EMT regulation by biophysical components of the TME. MCF-7 breast cancer cells are cultured on these artificial microenvironments, and temporal regulation of cellular morphology and EMT markers is investigated. The results show that upon physical stimulation, cells on 300 nm artificial microenvironments advance to EMT and display a decreased extracellular matrix (ECM) protein secretion. In contrast, cells on 500 nm artificial microenvironments are trapped in EMT-imbalance. Interestingly, cells on 1000 nm artificial microenvironments resemble those on control surfaces. Upon further investigation, it is found that EMT induction is triggered via transforming growth factor β (TGF-β) and ECM cleaving protein, matrix metalloproteinease-9. Immunostaining EMT proteins highlighted that EMT induction is achieved through attenuation of cell-cell and cell-microenvironment adhesions. The physical stimulation-induced TGF-β perturbation can have a profound impact on the understanding of tumor-promoting signaling cascades originated by cellular microenvironment.

Tunable Protein/Cell Binding and Interaction with Neurite Outgrowth of Low-Impedance Zwitterionic PEDOTs

Zwitterionic poly(3,4-ethylenedioxythiophene) (PEDOT) is an effective electronic material for bioelectronics because it exhibits efficient electrical trade-off and diminishes immune response. To promote the use of zwitterionic PEDOTs in bioelectronic devices, especially for cell alignment control and close electrocoupling, features such as tunable interaction of PEDOTs with proteins/cells and spatially modulating cell behavior are required. However, there is a lack of reliable methods to assemble zwitterionic EDOTs with other functionalized EDOT materials, having different polarities and oxidation potentials, to prepare PEDOTs with the aforementioned surface properties. In this study, we have developed a surfactant-assisted electropolymerization to assemble phosphorylcholine (PC)-functionalized EDOT with other functionalized EDOTs. By adjusting compositions, the interaction of PEDOT copolymers with proteins/cells can be finely tuned; the composition adjustment has an ignorable influence on the impedance of the copolymers. We also demonstrate that the cell-repulsive force generated from PC can spatially guide the neurite outgrowth to form a neuron network at single-cell resolution and greatly enhance the neurite outgrowth by 179%, which is significantly more distinctive than the reported topography effect. We expect that the derived tunable protein/cell interaction and the PC-induced repulsive guidance for the neurite outgrowth can make low-impedance zwitterionic PEDOTs more useful in bioelectronics.

Zwitterionic polymer/polydopamine coating reduce acute inflammatory tissue responses to neural implants

The inflammatory brain tissue response to implanted neural electrode devices has hindered the longevity of these implants. Zwitterionic polymers have a potent anti-fouling effect that decreases the foreign body response to subcutaneous implants. In this study, we developed a nanoscale anti-fouling coating composed of zwitterionic poly (sulfobetaine methacrylate) (PSB) and polydopamine (PDA) for neural probes. The addition of PDA improved the stability of the coating compared to PSB alone, without compromising the anti-fouling properties of the film. PDA-PSB coating reduced protein adsorption by 89% compared to bare Si samples, while fibroblast adhesion was reduced by 86%. PDA-PSB coated silicon based neural probes were implanted into mouse brain, and the inflammatory tissue responses to the implants were assessed by immunohistochemistry one week after implantation. The PSB-PDA coated implants showed a significantly decreased expression of glial fibrillary acidic protein (GFAP), a marker for reactive astrocytes, within 70 μm from the electrode-tissue interface (p < 0.05). Additionally, the coating reduced the microglia activation as shown in decreased Iba-1 and lectin staining, and improved blood-brain barrier integrity indicated by reduced immunoglobulin (IgG) leakage into the tissue around the probes. These findings demonstrate that anti-fouling zwitterionic coating is effective in suppressing the acute inflammatory brain tissue response to implants, and should be further investigated for its potential to improve chronic performance of neural implants.

Multifunctional one-dimensional polymeric nanostructures for drug delivery and biosensor applications

Advances in nanotechnology in the last decades have paved the way for significant achievements in diagnosis and treatment of various diseases. Different types of functional nanostructures have been explored and utilized as tools for addressing the challenges in detection or treatment of diseases. In particular, one-dimensional nanostructures hold great promise in theranostic applications due to their increased surface area-to-volume ratios, which allow better targeting, increased loading capacity and improved sensitivity to biomolecules. Stable polymeric nanostructures that are stimuli-responsive, biocompatible and biodegradable are especially preferred for bioapplications. In this review, different synthesis techniques of polymeric one-dimensional nanostructures are explored and functionalization methods of these nanostructures for specific applications are explained. Biosensing and drug delibiovery applications of these nanostructures are presented in detail.

Potential Reproducibility of Potassium-Selective Electrodes Having Perfluorinated Alkanoate Side Chain Functionalized Poly(3,4-ethylenedioxytiophene) as a Hydrophobic Solid Contact

The irreproducibility of the standard potential (E°) is probably the last major challenge for the commercialization of solid-contact ion-selective electrodes (SCISEs) as single-use or wearable sensors. To overcome this issue, we are introducing for the first time a perfluorinated alkanoate side chain functionalized poly(3,4-ethylenedioxythiophene) (PEDOTF) as a hydrophobic SC in potassium-selective electrodes (K-SCISEs) based on plasticized poly(vinyl chloride). The SC incorporates the tetrakis(pentafluorophenyl)borate (TFAB^-) anion, which is also present as a lipophilic additive in the ion-selective membrane (ISM), thus ensuring thermodynamic reversibility at the SC/ISM interface and improving the potential reproducibility of the electrodes. We show here that the PEDOTF-TFAB solid contact, which was prepolarized prior to the ISM deposition to either its half or fully conducting form (i.e. different oxidation states) in acetonitrile containing 0.01 M KTFAB, had a very stable open-circuit potential and an outstanding potential reproducibility of only ±0.5 mV (n = 6) for 1 h in the same solution after the prepolarization. This shows that the oxidation state of the highly hydrophobic PEDOTF-TFAB film (water contact angle 133°) is stable over time and can be precisely controlled with prepolarization. The SC was also not light sensitive, which is normally a disadvantage of conducting polymer SCs. After the ISM deposition, the standard deviation of the E° of the K-SCISEs prepared on glassy carbon was ±3.0 mV (n = 5), which is the same as that for conventional liquid contact K-ISEs. This indicates that the ISM deposition is the main source for the potential irreproducibility of the K-SCISEs, which has been overlooked previously.

Engineering Antifouling Conducting Polymers for Modern Biomedical Applications

Conducting polymers are considered to be favorable electrode materials for implanted biosensors and bioelectronics, because their mechanical properties are similar to those of biological tissues such as nerve and brain tissues. However, one of the primary challenges for implanted devices is to prevent the unwanted protein adhesion or cell binding within biological fluids. The nonspecific adsorption generally causes the malfunction of implanted devices, which is problematic for long-term applications. When responding to the requirements of solving the problems caused by nonspecific adsorption, an increasing number of studies on antifouling conducting polymers has been recently published. In this review, synthetic strategies for preparing antifouling conducting polymers, including direct synthesis of functional monomers and post-functionalization, are introduced. The applications of antifouling conducting polymers in modern biomedical applications are particularly highlighted. This paper presents focuses on the features of antifouling conducting polymers and the challenges of modern biomedical applications.

Synergistic Effects of Ions and Surface Potentials on Antifouling Poly(3,4-ethylenedioxythiophene): Comparison of Oligo(Ethylene Glycol) and Phosphorylcholine

For electrified surfaces, ions and applied potentials play major roles in controlling the surface properties. Antifouling materials such as poly(ethylene glycol) and zwitterionic polymers that resist nonspecific protein binding and cell adhesion play a key role in various biomedical applications. In this study, we investigated and compared the antifouling properties of conducting polymers grafted with oligo(ethylene glycol) groups and phosphorylcholine (PC) groups in the presence of different anions and applied potentials. Considerable effort has been made to illustrate the different effects of manipulating the antifouling properties of these two surfaces. We prepared polymer films by applying electropolymerization to two functionalized (3,4-ethylenedioxythiophene) polymers containing triethylene glycol and PC groups, respectively. A quartz crystal microbalance with dissipation (QCM-D) was employed to characterize the negatively charged bovine serum albumin and positively charged lysozyme adsorption as a function of ionic concentration in the presence of various Hofmeister anions. The frequency changes corresponded to the protein or ion adsorption/desorption behavior on the surface. The anions adsorbed on polymer films to effectively enhance the hydration layer of the polymer surface and reduce nonspecific protein binding. We further integrated a potentiostat with the QCM-D to control the protein adsorption/desorption behaviors by applying potentials, and we conducted an electrochemical QCM-D study. Most importantly, with the synergistic effect of ions and surface potential, a nearly fresh polymer surface was regenerated. This study describes principles to maintain and regenerate the antifouling properties of electrified surfaces, which are critical for implanted bioelectronics applications.

Electrochemical SERS for in Situ Monitoring the Redox States of PEDOT and Its Potential Application in Oxidant Detection

In response to recent developments for applying conducting polymers on various biomedical applications, the development of characterization techniques for evaluating the states of conducting polymers in liquids is beneficial to the applications of these materials. In this study, we propose a platform using electrochemical surface-enhanced Raman scattering (EC-SERS) technology, which allows a direct measurement of the redox states of conducing polymers in liquids. A thiophene-based conducting polymer, hydroxymethyl poly(3,4-ethylenedioxythiophene) or poly(EDOT-OH), was used to demonstrate this concept. Poly(EDOT-OH) films were coated on Au nanoparticle-coated ITO glass as SERS-active substrates. Taking the advantage of Raman enhancement, we can in situ and clearly monitor the redox behavior of poly(EDOT-OH) in aqueous solutions. The Raman peak intensity decreases as the poly(EDOT-OH) film is oxidized. Furthermore, we demonstrated our idea to utilize this phenomenon as the sensing mechanism for oxidant detection. The Raman intensity of conducting polymers reduces faster when oxidants exist, and we obtain a quantitative analysis for the detection of oxidants. Moreover, the oxidized poly(EDOT-OH) films can be reused for detection of oxidants simply by applying a reduction potential to activate the poly(EDOT-OH) films. The film stability was also confirmed, and the detection of two other oxidants, namely ammonium persulfate and iron chloride, were also demonstrated. The results show different SERS spectra of poly(EDOT-OH) films oxidized by using different oxidants. Besides, the oxidized films can be easily recovered simply by applying a cathodic potential, which allows repeating usage and makes it possible for continuous monitoring applications. To the best of our knowledge, this is the first time to apply PEDOT's Raman feature for detection purposes.

All-Organic Conductive Biomaterial as an Electroactive Cell Interface

Various attractive materials are being used in bioelectronics recently. In this paper, hydroxymethyl-3,4-ethylenedioxythiophene (EDOT-OH) has been in situ integrated and polymerized on the surface of the regenerated silk fibroin (RSF) film to construct a biocompatible electrode. In order to improve the efficiency of in situ polymerization, sodium dodecyl sulfate (SDS) was adopted as surfactant to construct a well-organized and stable poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PEDOT-OH) coating, whereas ammonium persulfate was used as oxidant. The effects of dosages of surfactant and oxidant, initial pH value, and monomer concentration on the polymerization were studied. Under the optimal conditions, the RSF/PEDOT-OH film exhibited a square resistance of 3.28 × 10⁵ Ω corresponding to a conductance of 6.1 × 10^-3 S/cm. Scanning electron microscope images indicated that PEDOT-OH was deposited uniformly on the surface of the RSF film with SDS. Furthermore, Fourier transform infrared spectroscopy confirmed that interactions existed between the peptide linkages of silk fibroin (SF) macromolecules and PEDOT-OH. The RSF/PEDOT-OH film displayed favorable electrochemical stability, biocompatibility, and fastness. This study provides a feasible method to endow conductivity to RSF materials in various forms. In addition, the conductive layer and biocompatible silk substrate make the RSF/PEDOT-OH biomaterial highly suitable for potential applications in bioelectric devices, sensors, and tissue engineering.

Glycan Stimulation Enables Purification of Prostate Cancer Circulating Tumor Cells on PEDOT NanoVelcro Chips for RNA Biomarker Detection

A glycan-stimulated and poly(3,4-ethylene-dioxythiophene)s (PEDOT)-based nanomaterial platform is fabricated to purify circulating tumor cells (CTCs) from blood samples of prostate cancer (PCa) patients. This new platform, phenylboronic acid (PBA)-grafted PEDOT NanoVelcro, combines the 3D PEDOT nanosubstrate, which greatly enhances CTC capturing efficiency, with a poly(EDOT-PBA-co-EDOT-EG3) interfacial layer, which not only provides high specificity for CTC capture upon antibody conjugation but also enables competitive binding of sorbitol to gently release the captured cells. CTCs purified by this PEDOT NanoVelcro chip provide well-preserved RNA transcripts for the analysis of the expression level of several PCa-specific RNA biomarkers, which may provide clinical insights into the disease.

Poly(3,4-ethylenedioxythiophene) (PEDOT) Derivatives: Innovative Conductive Polymers for Bioelectronics

Poly(3,4-ethylenedioxythiophene)s are the conducting polymers (CP) with the biggest prospects in the field of bioelectronics due to their combination of characteristics (conductivity, stability, transparency and biocompatibility). The gold standard material is the commercially available poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). However, in order to well connect the two fields of biology and electronics, PEDOT:PSS presents some limitations associated with its low (bio)functionality. In this review, we provide an insight into the synthesis and applications of innovative poly(ethylenedioxythiophene)-type materials for bioelectronics. First, we present a detailed analysis of the different synthetic routes to (bio)functional dioxythiophene monomer/polymer derivatives. Second, we focus on the preparation of PEDOT dispersions using different biopolymers and biomolecules as dopants and stabilizers. To finish, we review the applications of innovative PEDOT-type materials such as biocompatible conducting polymer layers, conducting hydrogels, biosensors, selective detachment of cells, scaffolds for tissue engineering, electrodes for electrophysiology, implantable electrodes, stimulation of neuronal cells or pan-bio electronics.

Specific Recognition of Human Influenza Virus with PEDOT Bearing Sialic Acid-Terminated Trisaccharides

Conducting polymers are good candidates for biosensor applications when molecular recognition element is imparted. We developed trisaccharide-grafted conducting polymers for label-free detection of the human influenza A virus (H1N1) with high sensitivity and specificity. A 3,4-ethylenedioxythiophene (EDOT) derivative bearing an oxylamine moiety was electrochemically copolymerized with EDOT. The obtained film was characterized by cyclic voltammetry, X-ray photoelectron spectroscopy, scanning electron microscopy, stylus surface profilometer, and AC-impedance spectroscopy. The trisaccharides comprising Sia-α2,6'-Gal-Glu (2,6-sialyllactose) or Sia-α2,3'-Gal-Glu (2,3-sialyllactose) were covalently introduced to the side chain of the conducting polymers as a ligand for viral recognition. Immobilization of sialyllactose was confirmed by quartz crystal microbalance (QCM) and water contact angle measurements. Specific interaction of 2,6-sialyllactose with hemagglutinin in the envelope of the human influenza A virus (H1N1) was detected by QCM and potentiometry with enhanced sensitivity by 2 orders of magnitude when compared with that of commercially available kits. The developed conducting polymers possessing specific virus recognition are a good candidate material for wearable monitoring and point-of-care testing because of their processability and mass productivity in combination with printing technologies.

Nucleoside surfaces as a platform for the control of surface hydrophobicity

Nucleosides are used as linker between conducting polymer films and hydrophobic subsituents.

Tuning Surface Charge and Morphology for the Efficient Detection of Dopamine under the Interferences of Uric Acid, Ascorbic Acid, and Protein Adsorption

In this research, we aimed to evaluate the impact of the surface charges and morphologies of electrodes on electrochemically detecting dopamine (DA) in the presence of protein adsorption, uric acid (UA), and ascorbic acid (AA). Through the electropolymerization of functionalized 3,4-ethylenedioxythiophenes (EDOT) directly on Au electrodes, we successfully created PEDOT-coated electrodes with three different functional groups and nanostructures. Negatively charged carboxylic acid groups attracted DA while reducing the interferences of UA and AA due to electrostatic effect. We used charge-free tetra(ethylene glycol) and zwitterionic phosphocholine groups are used to evaluate the interference of protein adsorption on DA sensing because they both can effectively prevent the nonspecific adsorption of proteins. These two electrodes can avoid protein adsorption, yet proved ineffective for DA sensing: both tetra(ethylene glycol) and the phosphocholine groups are electroneutral and have minimal electrostatic interactions with DA. We also used three proteins of different isoelectric points - bovine serum albumin, lysozyme, and fibrinogen - to evaluate the influence of protein adsorption on DA detection. We found that for an electrode coated with carboxylic acid-functionalized PEDOT, the adsorption of positively charged lysozyme can promote the detection sensitivity of AA and UA, and that all protein adsorption lowers the sensitivity of DA. In contrast, nanostructures promote the detection sensitivity of all three molecules. All of our tested functionalized PEDOT-coated electrodes demonstrated good stability and functionality in buffers.

In Situ Electrochemical Synthesis and Deposition of Discotic Hexa-peri-hexabenzocoronene Molecules on Electrodes: Self-Assembled Structure, Redox Properties, and Application for Supercapacitor

Discotic hexa-peri-hexabenzocoronene (HBC) molecules are synthesized by electrochemical cyclodehydrogenation reaction and in situ self-assembled to π-electronic, discrete nanofibular objects with an average diameter about 70 nm, which are deposited directly onto the electrode. The nanofibers consist of columnar arrays of the π-stacked HBC molecules and the intercolumnar distance is determined to be 1.19 nm by X-ray diffraction, which corresponds well to the distance of 1.1 nm observed by high-resolution transmitting electron microscopy. The diameter of the molecular columns matches the size of the discotic HBC molecule indicating face-to-face π-stacking of HBC units in the column. The HBC nanofibers on electrode are redox active, and the nanosized columnar structures provide a huge surface area, which is a great benefit for the charging/discharging process, delivering excellent capacitance of 155 F g(-1) . The described electrochemical deposition method shows great advantage for self-assembling the family of insoluble and structurally designable graphene-like nano materials, which constitutes an important step toward molecular electronics.

Conducting films based on single-component molecular metals

We demonstrate that single component molecular metals can be used as conductive inks for printed electronics.

Controlling electrodeposited conducting polymer nanostructures with the number and the length of fluorinated chains for adjusting superhydrophobic properties and adhesion

Controlling the formation of surface nanostructures is highly important for various applications, and in particular for superhydrophobic properties.

Ante versus post-functionalization to control surface structures with superhydrophobic and superoleophobic properties

Here, we report the first use of the Staudinger–Vilarrasa reaction with perfluorinated surface modification.