Hollow metal nanorods with tunable dimensions, porosity, and photonic properties

Three-dimensional nanoporous gold/gold nanoparticles substrate for surface-enhanced Raman scattering detection of illegal additives in food

Owing to their nanoscale size and porous structure, both colloidal gold nanoparticles (AuNPs) and nanoporous gold (NPG) have demonstrated good and stable surface-enhanced Raman scattering (SERS) activity, and are therefore widely used as SERS substrates for the rapid detection of various components in food, environmental, biological, and other samples. In this study, we fabricated a novel, sensitive, and reproducible composite three-dimensional (3D) substrate for rapid SERS-based detection of illegal additives in food products. AuNPs and NPGs were prepared by chemical reduction and chemical dealloying methods, with the particle size of AuNPs about 60 nm and the pore size of NPG in the range of 5-36 nm. The AuNPs were then assembled on the surface of NPG to form the composite substrate 3D-NPG/AuNPs, which was characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and other methods. Finally, the new SERS substrate combined with a portable Raman spectrometer was used to detect the illegal food additives 6-benzylaminopurine and melamine, with detection limits of 1 × 10-9 M and 5 × 10-7 M respectively. We further analyzed the relationship between the dealloying time-controlled morphology and the SERS properties of NPG, demonstrating that 3D-NPG/AuNPs as a novel SERS substrate have strong practical application potential in the rapid detection of food additives and other substances.

Engineering one-dimensional trough-like Au-Ag2S nano-hybrids for plasmon-enhanced photoelectrodetection of human α-thrombin

One-dimensional (1D) morphology-unique Au-Ag₂S nano-hybrids are achieved by combining the interfacial self-assembly of Ag nanowires, interface-oriented site-specific etching of Ag nanowires with AuCl₄^-, and the sulfurization of S^2-. The as-formed Au-Ag₂S nano-hybrid has a trough-like morphology. The wall of the Au-Ag₂S nanotrough is a Ag₂S/Au/Ag₂S trilayer wall, but the Ag₂S layer is a Ag₂S-rich mixture of Ag₂S and Au rather than pure Ag₂S because of the diffusion of Au atoms towards Ag₂S. The Au-Ag₂S nanotrough shows strong absorption in the visible region (400-800 nm) and exhibits a favorable photoelectrochemical (PEC) response, the photocurrent of which is ∼8.5 times larger than that of pure Ag₂S. This enhanced PEC response originates from the localized plasmonic resonance effect of Au. Moreover, the PEC biosensor based on the Au-Ag₂S nanotroughs shows high sensitivity and selectivity, satisfactory reproducibility, and good stability towards human α-thrombin (TB) detection: a sensitive linear response ranging from 1.00 to 10.00 pmol L^-1 and a low detection limit of 0.67 pmol L^-1. This study provides a new model for studying the PEC behavior of plasmonic metal/semiconductor materials, and this Au-Ag₂S nanotrough may also be useful in the fields of photocatalysis and photovoltaics.

Exploring High Aspect Ratio Gold Nanotubes as Cytosolic Agents: Structural Engineering and Uptake into Mesothelioma Cells

The generation of effective and safe nanoagents for biological applications requires their physicochemical characteristics to be tunable, and their cellular interactions to be well characterized. Here, the controlled synthesis is developed for preparing high-aspect ratio gold nanotubes (AuNTs) with tailorable wall thickness, microstructure, composition, and optical characteristics. The modulation of optical properties generates AuNTs with strong near infrared absorption. Surface modification enhances dispersibility of AuNTs in aqueous media and results in low cytotoxicity. The uptake and trafficking of these AuNTs by primary mesothelioma cells demonstrate their accumulation in a perinuclear distribution where they are confined initially in membrane-bound vesicles from which they ultimately escape to the cytosol. This represents the first study of the cellular interactions of high-aspect ratio 1D metal nanomaterials and will facilitate the rational design of plasmonic nanoconstructs as cytosolic nanoagents for potential diagnosis and therapeutic applications.

Batch preparation of gold nanoparticles with highly uniform morphology and tunable plasmonic properties

The plasmonic properties of individual metallic nanostructures are of great importance for application in surface science, materials science, and nanophotonics. Herein, being facilitated with a home-made flow device and pulsed laser irradiation, we proposed a batch preparation protocol towards spherical Au nanoparticles (Au NPs) and cage shell entrapped spherical core nanoparticles (Au@cAu NPs) with highly uniform morphology and a tunable size distribution. The Fano resonance behavior exhibited by the effective interaction between spherical Au NPs and the silicon surface has great potential for the design of ultrasensitive optical sensing devices. In comparison with the spherical Au NP, the individual Au@cAu NP displayed not only a red-shifted and broadened localized surface plasmon resonance (LSPR) scattering peak, but also a higher electromagnetic field enhancement. Therefore, the Au@cAu NPs offer a better choice for plasmonic enhancement-based applications in the red and near-infrared region. In general, the current work provides a new and easy method for the large-scale preparation of gold-based uniform nanostructures, and offers an avenue to understand the interference of different plasmon modes in plasmonic systems, which has potential applications in surface science.

Photoactive Tungsten-Oxide Nanomaterials for Water-Splitting

This review focuses on tungsten oxide (WO3) and its nanocomposites as photoactive nanomaterials for photoelectrochemical cell (PEC) applications since it possesses exceptional properties such as photostability, high electron mobility (~12 cm2 V-1 s-1) and a long hole-diffusion length (~150 nm). Although WO3 has demonstrated oxygen-evolution capability in PEC, further increase of its PEC efficiency is limited by high recombination rate of photogenerated electron/hole carriers and slow charge transfer at the liquid-solid interface. To further increase the PEC efficiency of the WO3 photocatalyst, designing WO3 nanocomposites via surface-interface engineering and doping would be a great strategy to enhance the PEC performance via improving charge separation. This review starts with the basic principle of water-splitting and physical chemistry properties of WO3, that extends to various strategies to produce binary/ternary nanocomposites for PEC, particulate photocatalysts, Z-schemes and tandem-cell applications. The effect of PEC crystalline structure and nanomorphologies on efficiency are included. For both binary and ternary WO3 nanocomposite systems, the PEC performance under different conditions-including synthesis approaches, various electrolytes, morphologies and applied bias-are summarized. At the end of the review, a conclusion and outlook section concluded the WO3 photocatalyst-based system with an overview of WO3 and their nanocomposites for photocatalytic applications and provided the readers with potential research directions.

Self-Templating Approaches to Hollow Nanostructures

This current research progress on the fabrication of hollow nanostructures by using self-templating methods is reviewed. After a brief introduction to the unique properties and applications of hollow nanostructures and the three general fabrication routes, the discussions are focused on the five main self-templating strategies, including galvanic replacement, the Kirkendall effect, Ostwald ripening, dissolution-regrowth, and the surface-protected hollowing process. Some newly developed synthetic routes are selected and discussed in detail. In conclusion, a summary and the perspectives on the directions that might lead the future development of this exciting field are presented.

One-pot synthesis of hollow hydrangea Au nanoparticles as a dual catalyst with SERS activity for in situ monitoring of a reduction reaction

The controlled synthesis of metallic nanomaterials has attracted the interest of many researchers due to their shape-dependent physical and chemical properties. However, most of the synthesized nanocrystals cannot be combined with spectroscopy to measure the reaction kinetics, thus limiting their use in monitoring the catalytic reaction process to elucidate its mechanism. As a powerful analytical tool, surface-enhanced Raman spectroscopy (SERS) can be used to achieve in situ monitoring of catalytic reactions by developing bifunctional metal nanocrystals with both SERS and catalytic activities. Herein, we have developed a simple one-pot synthesis method for the large-scale and size-controllable preparation of highly rough hydrangea Au hollow nanoparticles. The growth mechanism of flower-like Au hollow nanostructures was also discussed. The hollow nanostructure with a 3D hierarchical flower shell combines the advantages of hollow nanostructure and hierarchical nanostructure, which possess high SERS activity and good catalytic activity simultaneously. Furthermore, the hydrangea Au hollow crystals were used as a bifunctional nanocatalyst for in situ monitoring of the reduction reaction of 4-nitrothiophenol to the 4-aminothiophenol.

Formation of bimetallic dumbbell shaped particles with a hollow junction during galvanic replacement reaction

The galvanic replacement reaction (GRR) has been shown to be an effective method to fine tune the structure of monometallic nanoparticles by controlling the precursor concentration and surface ligands. However, the structural evolution of nanoparticles is not well understood in multimetallic systems, where along with oxidation, dealloying and diffusion occur simultaneously. Here, we demonstrate that by controlling the rate of GRR in AuCu alloy nanorods, they can be transformed into either AuCu hollow rods or AuCu@Au core-shell spheroids. Interestingly, the transformation of rods into spheroids involved a critical intermediate state with a hollow junction and dumbbell shape. The formation of a hollow junction region was attributed to preferential diffusion of Cu atoms to the tips caused by the polycrystallinity and high curvature of the tips of the initial template. This structural transformation was also monitored in situ by single particle scattering spectroscopy. The coupling between the two ends of the dumbbell-shaped intermediate connected with a hollow metallic junction gives rise to additional plasmonic features compared with regular rods. Electrodynamic simulations showed that varying the dimensions of the hollow part by even one nanometer altered the plasmon resonance wavelength and lineshape drastically. This study shows that single particle plasmon resonance can be used as an exquisite tool to probe the internal structure of the nanoscale junctions.

Nanoporous Gold Nanoparticles and Au/Al2O3 Hybrid Nanoparticles with Large Tunability of Plasmonic Properties

Nanoporous gold nanoparticles (NPG-NPs) with controlled particle size and pore size are fabricated via a combination of solid-state dewetting and a subsequent dealloying process. Because of the combined effects of size and porosity, the NPG-NPs exhibit greater plasmonic tunability and significantly higher local field enhancement as compared to solid NPs. The effects of the nanoscale porosity and pore size on the optical extinction are investigated for the NPG-NPs with different particle sizes experimentally and theoretically. The influences of both porosity and pore size on the plasmonic properties are very complicated and clearly different for small particles with dominated dipole mode and large particles with dominated quadrupole mode. Au/Al₂O₃ hybrid porous NPs with controlled porosity and composition ratio are fabricated through plasma-enhanced atomic layer deposition of Al₂O₃ into the porous structure. In the Au/Al₂O₃ hybrid porous NPs, both Au and Al₂O₃ components are bicontinuously percolated over the entire structure. A further red shift of the plasmon peak is observed in the hybrid NPs due to the change of the environmental refractive index. The high tunability of the plasmonic resonances in the NPG-NPs and the hybrid porous NPs can be very useful for many applications in sensing biological and organic molecules.

Au-Ag hollow nanostructures with tunable SERS properties

Fabrication of hollow Au-Ag nanoparticles is done by the sequential action of galvanic replacement and Kirkendall effect. Polyol synthesized silver nanoparticles were used as templates and the size of cavities is controlled by the systematic addition of the HAuCl₄. Au-Ag nanoparticles carved in different depths were tested for application as substrates for surface enhanced Raman scattering. Two medically important Raman active analytes-Nile blue chloride and Crystal violet were used in the surface enhanced Raman scattering (SERS) performance analysis. A systematic study has been made on the Raman enhancement of hollow nanoparticles fabricated with different cavity dimensions and compared with that of the silver templates used. The enhancement observed for these hollow substrates with cavities is of interest since Au protected hollow nanostructures are vital and an active area of interest in drug delivery systems.

3D structure-preserving galvanic replacement to create hollow Au microstructures

3D hollow Au microstructures (HL-AuMSs) are fabricated via a galvanic replacement approach. 3D nanoporous Ag microstructures (np-AgMSs) are sacrificed as a template to control the structural complexity of HL-AuMSs.

A systematic investigation of the charging effect in scanning electron microscopy for metal nanostructures on insulating substrates

Scanning electron microscopy is perhaps the most important method for investigating and characterizing nanostructures. A well-known challenge in scanning electron microscopy is the investigation of insulating materials. As insulating materials do not provide a path to ground they accumulate charge, evident as image drift and image distortions. In previous work, we have seen that sample charging in arrays of metal nanoparticles on glass substrates leads to a shrinkage effect, resulting in a measurement error in the nanoparticle dimension of up to 15% at 10 kV and a probe current of 80 ± 10 pA. In order to investigate this effect in detail, we have fabricated metal nanostructures on insulating borosilicate glass using electron beam lithography. Electron beam lithography allows us to tailor the design of our metal nanostructures and the area coverage. The measurements are carried out using two commonly available secondary electron detectors in scanning electron microscopes, namely, an InLens- and an Everhart-Thornley detector. We identify and discriminate several contributions to the effect by varying microscope settings, including the size of the aperture, the beam current, the working distance and the acceleration voltage. We image metal nanostructures of various sizes and geometries, investigating the influence of scan-direction of the electron beam and secondary electron detector used for imaging. The relative measurement error, which we measure as high as 20% for some settings, is found to depend on the acceleration voltage and the type of secondary electron detector used for imaging. In particular, the Everhart-Thornley detectors lower sensitivity to SE₁ electrons increase the magnitude of the shrinkage of up to 10% relative to the InLens measurements. Finally, a method for estimating charge balance in insulating samples is presented.

Intermatrix synthesis of Ag, AgAu and Au nanoparticles by the galvanic replacement strategy for bactericidal and electrocatalytically active nanocomposites

Nanocomposites with a tuned distribution of nanoparticles for water treatment and electrochemical assays are prepared by the intermatrix synthesis technique.

Rational Design of Metal Nanoframes for Catalysis and Plasmonics

Recently, metal nanoframes have received increased attention due to their unique spatial and physicochemical, e.g., catalytic and plasmonic properties. So far, a variety of synthetic procedures have been developed to fabricate metal nanoframes with different shapes, sizes and compositions. Typical synthesis of metal nanoframes involves two stages: 1) formation of solid nanocrystals and 2) hollowing out the interiors and side faces. In this review, solution-phase synthetic strategies are summarized, based on galvanic replacement reactions, oxidative etching, the Kirkendall effect, electrodeposition, and template-assisted growth, as well as one-pot synthesis. Their potential applications in catalysis and optical sensing are overviewed as well.

From porous gold nanocups to porous nanospheres and solid particles--a new synthetic approach

We report a versatile approach for the synthesis of porous gold nanocups, porous gold nanospheres and solid gold nanoparticles. Gold nanocups are formed by the slow reduction of gold salt (HAuCl4⋅3H2O) using aminoantipyrene (AAP) as a reducing agent. Adding polyvinylpyrrolidone (PVP) to the gold salt followed by reduction with AAP resulted in the formation of porous gold nanospheres. Microwave irradiation of both of these porous gold particles resulted in the formation of slightly smaller but solid gold particles. All these nanoparticles are thoroughly characterized by UV-visible spectroscopy, scanning electron microscopy (SEM), high resolution transmission electron microscopy (HR-TEM) and bright-field tomography. Due to the larger size, porous nature, low density and higher surface area, these nanomaterials may have interesting applications in catalysis, drug delivery, phototherapy and sensing.

One-step synthesis of high-quality homogenous Te/Se alloy nanorods with various morphologies

A convenient method was developed for controllable synthesis of homogeneous trigonal Te/Se alloy nanorods (t-Te/Se ANRs) with diverse morphologies, aspect ratios and compositions at room temperature in aqueous solution.

Morphological and physicochemical properties of Ag–Au binary nanocomposites prepared using different surfactant capped Ag nanoparticles

The deposition of Au on Ag NPs passivated with PVP, CTAB and TX-100 surfactants resulted in the formation of hollow, solid and porous Ag–Au bimetallic NCs, respectively, exhibiting ∼2 times higher catalytic activity than the monometallic Ag NPs.

Design and fabrication of Ni nanowires having periodically hollow nanostructures

We propose a concept for the design and fabrication of metal nanowires having periodically hollow nanostructures inside the pores of an anodic aluminum oxide (AAO) membrane using a sacrificial metal. In this study, nickel (Ni) and silver (Ag) were used as the base metal and the sacrificial metal, respectively. Alternating an applied potential between -0.4 and -1.0 V provided alternatively deposited Ni and Ag segments in a Ni-Ag 'barcode' nanowire with a diameter of 18 or 35 nm. After etching away the Ag segments, we fabricated Ni nanowires with nanopores of 12 ± 5.3 nm. Such nanostructure formation is explained by the formation of a Ni shell layer over the surface of the Ag segments due to the strong affinity of Ni(2+) for the interior surfaces of AAO. The Ni shell layer allows the Ni segments to remain even after dissolution of the Ag segments. Because the electroplating conditions can be easily controlled, we could carefully adjust the size and pitch of the periodically hollow nanospaces. We also describe a method for the fabrication of Ni nanorods by forming an Ag shell instead of a Ni shell on the Ni-Ag barcode nanowire, in which the interior of the AAO surfaces was modified with a compound bearing a thiol group prior to electroplating.

Efficient photoelectrochemical water oxidation over cobalt-phosphate (Co-Pi) catalyst modified BiVO4/1D-WO3 heterojunction electrodes

We report the design, synthesis and photoelectrochemical characterization of cobalt phosphate (Co-Pi) oxygen evolution catalyst modified heterojunction photoelectrodes consisting of one-dimensional WO3 nanorods (1D-WO3) and highly porous BiVO4 layers. The 1D-WO3 nanorods were prepared by the decomposition of the tetrabutylammonium decatungstate precursor in the presence of poly(ethylene glycol) as a binding agent. The porous BiVO4 layers were spray deposited using a surfactant assisted metal-organic decomposition method. The Co-Pi oxygen evolution catalyst was deposited onto the BiVO4/1D-WO3/FTO heterojunction electrode using a photoassisted electrodeposition method. The Co-Pi catalyst modified heterojunction electrodes exhibited a sustained enhancement in the photocurrent compared to the unmodified BiVO4/1D-WO3/FTO heterojunction electrodes. The improved photoelectrochemical properties profited from the enhanced charge carrier separation achieved through the integration of highly porous BiVO4 layers on top of 1D-WO3 nanorods and from the superior kinetics due to the presence of the Co-Pi oxygen evolution catalyst on top of BiVO4/1D-WO3/FTO heterojunction electrodes.

Template directed synthesis of plasmonic gold nanotubes with tunable IR absorbance

A nearly parallel array of pores can be produced by anodizing aluminum foils in acidic environments. Applications of anodic aluminum oxide (AAO) membranes have been under development since the 1990's and have become a common method to template the synthesis of high aspect ratio nanostructures, mostly by electrochemical growth or pore-wetting. Recently, these membranes have become commercially available in a wide range of pore sizes and densities, leading to an extensive library of functional nanostructures being synthesized from AAO membranes. These include composite nanorods, nanowires and nanotubes made of metals, inorganic materials or polymers. Nanoporous membranes have been used to synthesize nanoparticle and nanotube arrays that perform well as refractive index sensors, plasmonic biosensors, or surface enhanced Raman spectroscopy (SERS) substrates, as well as a wide range of other fields such as photo-thermal heating, permselective transport, catalysis, microfluidics, and electrochemical sensing. Here, we report a novel procedure to prepare gold nanotubes in AAO membranes. Hollow nanostructures have potential application in plasmonic and SERS sensing, and we anticipate these gold nanotubes will allow for high sensitivity and strong plasmon signals, arising from decreased material dampening.

Galvanic-cell-induced growth of Ag nanosheet-assembled structures as sensitive and reproducible SERS substrates

SERS up: Ag nanosheet-assembled structures with controlled morphologies were achieved on indium tin oxide substrates by galvanic-cell-induced growth (see figure). These structures exhibit a highly active and homogeneous surface-enhanced Raman scattering (SERS) effect, and show promising potential as reliable SERS substrates for detection of trace polychlorinated biphenyls.

Multimetallic alloy nanotubes with nanoporous framework

One-dimensional nanotubes (NTs) that consist of multiple metallic components are promising platforms for potential applications, whereas only a few synthetic methods of multimetallic NTs have been reported to date. In the present work, we developed a general synthesis route for the production of uniform multicomponent one-dimensional tubular nanostructures with various combinations of Pt, Pd, and Ag by using ZnO nanowires (NWs) as sacrificial templates. The ZnO NWs serve not only as physical templates but also as nucleation sites for the reduction of metal precursors, and thereby several metal precursors could be reduced simultaneously to produce multimetallic NTs. By using this approach, Pt-Pd, Pt-Ag, and Pd-Ag binary alloy NTs, and even Pt-Pd-Ag ternary alloy NTs could be successfully prepared. The prepared Pt-Pd binary alloy NTs exhibited improved electrocatalytic activity and stability toward ethanol oxidation due to their characteristic tubular morphology with well-interconnected nanoporous framework and synergism between two constituent metals. Furthermore, our approach can facilitate the fabrication of patterned multimetallic NT arrays on solid and flexible substrates with strong mechanical robustness. The present templating method does not require any extra steps to remove templates or additional surfactants which are often required to control the shape of nanostructures. This strategy offers a convenient, versatile, low-cost, and highly valuable approach to the fabrication of multimetallic nanostructures with various components and compositions.

Ligand-optimized electroless synthesis of silver nanotubes and their activity in the reduction of 4-nitrophenol

A facile electroless plating procedure for the controlled synthesis of nanoscale silver thin films and derived structures such as silver nanotubes was developed and the products were characterized by SEM, TEM and EDS. The highly stable plating baths consist of AgNO(3) as the metal source, a suitable ligand and tartrate as an environmentally benign reducing agent. Next to the variation of the coordinative environment of the oxidizing component, the influence of the pH value was evaluated. These two governing factors strongly affect the plating rate and the morphology of the developing silver nanoparticle films and can be used to adapt the reaction to synthetic demands. The refined electroless deposition allows the fabrication of homogeneous high aspect-ratio nanotubes in ion track etched polycarbonate. Template-embedded metal nanotubes can be interpreted as parallelled microreactors. Following this concept, both the silver nanotubes and spongy gold nanotubes obtained by the use of the silver structures as sacrificial templates were applied in the reduction of 4-nitrophenol by sodium borohydride, proving to be extraordinarily effective catalysts.

Polyelectrolyte-templated synthesis of bimetallic nanoparticles

Bimetallic nanoparticles (NPs) are known to exhibit enhanced optical and catalytic properties that can be optimized by tailoring NP composition, size, and morphology. Galvanic deposition of a second metal onto a primary metal NP template is a versatile method for fabricating bimetallic NPs using a scalable, solution-based synthesis. We demonstrate that the galvanic displacement reaction pathway can be controlled through appropriate surface modification of the NP template. To synthesize bimetallic Au-Ag NPs, we used colloidal Ag NPs modified by layer-by-layer (LBL) assembled polyelectrolyte layers to template the reduction of HAuCl(4). NPs terminated with positively and negatively charged polyelectrolytes yield highly contrasting morphologies and Au surface concentrations. We propose that these charged surface layers control galvanic charge transfer by controlling nucleation and diffusion at the deposition front. This surface-directed synthetic strategy can be advantageously used to tailor both overall NP morphology and Au surface concentrations.

A general procedure to synthesize highly crystalline metal oxide and mixed oxide nanocrystals in aqueous medium and photocatalytic activity of metal/oxide nanohybrids

A conventional and general route has been exploited to the high yield synthesis of many kinds of highly crystalline metal oxide and mixed oxide nanocrystals with different morphologies including belt, rod, truncated-octahedron, cubic, sphere, sheet via the hydrothermal reaction of inorganic precursors in aqueous solution in the presence of bifunctional 6-aminohexanoic acid (AHA) molecules as a capping agent. This method is a simple, reproducible and general route for the preparation of a variety of high-crystalline inorganic nanocrystals in scale-up. The shape of inorganic nanocrystals such as CoWO(4), La(2)(MoO(4))(3) can be controlled by simply adjusting the synthesis conditions including pH solution and reaction temperature. Further, by tuning precursor monomer concentration, the mesocrystal hierarchical aggregated microspheres (e.g., MnWO(4), La(2)(MoO(4))(3)) can be achieved, due to the spontaneous assembly of individual AHA-capped nanoparticles. These obtained AHA-capped nanocrystals are excellent supports for the synthesis of a variety of hybrid metal/oxide nanocrystals in which noble metal particles are uniformly deposited on the surface of each individual nanosupport. The photocatalytic activity of Ag/TiO(2) nanobelts as a typical hybrid photocatalyst sample for Methylene Blue degradation was also studied.