The Principle of Margin Convergence in Rotator Cuff Repair as a Means of Strain Reduction at the Tear Margin

Middle trapezius tendon transfer using Achilles allograft for irreparable isolated supraspinatus tendon tears effectively restores the superior stability of the humeral head without restricting range of motion: a biomechanical study

BACKGROUND

Middle trapezius tendon (MTT) transfer has been suggested for promising treatment of irreparable isolated supraspinatus tendon tears (IISTTs). However, there have been no attempts to assess the biomechanical efficacy of MTT transfer. This study aims to evaluate the biomechanical efficacy of MTT transfer in the setting of IISTTs.

METHODS

Eight fresh frozen cadaveric shoulders were tested in 3 conditions: (1) intact rotator cuff, (2) IISTT, and (3) MTT transfer using Achilles allograft for IISTTs. Total humeral rotational range of motion (ROM), superior translation of the humeral head, and subacromial contact characteristics were measured at 0°, 20°, and 40° glenohumeral abduction (representing 0°, 30°, and 60° shoulder abduction). Superior translation and subacromial contact pressures were measured at 0°, 30°, 60°, and 90° external rotation (ER). Two different MTT muscle loading conditions were investigated. A linear mixed effects model and Tukey post hoc test were used for statistical analysis.

RESULTS

Total ROM was significantly increased after IISTT at 20° abduction (P = .037). There were no changes in total ROM following MTT transfer compared to the IISTT condition (P > .625 for all comparisons). The IISTT condition significantly increased superior translation compared to the intact rotator cuff condition in 0° and 20° abduction with all ER angles (P < .001), 40° abduction-30° ER (P = .016), and 40° abduction-60° ER (P = .002). MTT transfer significantly decreased superior translation of the humeral head at all abduction angles compared to the IISTT condition (P < .026). MTT transfer significantly decreased peak contact pressure by 638.7 kPa (normal loading) and 726.8 kPa (double loading) at 0° abduction-30° ER compared to the IISTT condition (P < .001). Mean contact pressure was decreased by 102.8 kPa (normal loading) and 118.0 kPa (double loading) at 0° abduction-30° ER (P < .001) and 101.0 kPa (normal loading) and 99.2 kPa (double loading) at 0° abduction-60° ER (P < .001). MTT transfer at 20° abduction-30° ER with 24 N loading significantly decreased contact pressure by 91.2 kPa (P = .035).

CONCLUSIONS

The MTT transfer biomechanically restored the superior humeral head translation and reduced the subacromial contact pressure in a cadaveric model of IISTT, while not restricting total ROM. These findings suggest that MTT transfer may have potential as a surgical treatment for IISTTs.

Salvaging the 'irreparable' tear: Superior Capsular Reconstruction augmented with partial cuff repair

Introduction

Massive rotator cuff tears (MRCTs) have long posed a complex problem for both patients and surgeons. If not treated promptly, tendon retraction, fatty infiltration and muscle atrophy of the rotator cuff muscles occur. These lead to irreparable RCTs with poor functional outcomes. We describe our technique of superior capsular reconstruction (SCR) augmented with partial cuff repair and report on our short term outcomes.

Method

Seven consecutive patients who underwent the procedure were recruited at our institution from January 2019 to December 2019. Medical records of these patients were reviewed looking at pre-operative symptoms and examination findings, imaging studies, intra-operative findings, the surgical technique employed, post-operative progress in terms of pain, affected shoulder range of movement and outcome scores.

Results

All patients showed complete tears of at least two tendons and were deemed irreparable intra-operatively. All patients exhibited Goutalier grade 2-4 wasting of the affected tendons on MRI and Patte grade 3 intra-operatively. At 12 months, the mean improvement shown in Constant score is 12.1 points, in University of California Los Angeles (UCLA) score is 9.4 points and in Oxford Shoulder Score is 17 points. Active forward flexion improved in all patients with a mean improvement of 40 degrees. Numerical Pain Rating Scale improved in all patients with a mean of 5.1 points.

Conclusion

Our case series shows good short-term outcomes can be achieved with SCR augmented with partial cuff repair. Notably, our SCR results showed encouraging results even for challenging revision rotator cuff repairs.

Outcomes of Double-Row Rotator Cuff Repair Using a Novel All-Suture Soft Anchor Medial Row

Background

Few studies have examined the short-term clinical outcomes of rotator cuff repair (RCR) with all-suture anchors for medial row anchor fixation.

Purpose

To evaluate clinical outcomes of double-row suture bridge RCR using a novel all-suture medial row anchor.

Study Design

Case series; Level of evidence, 4.

Methods

We enrolled 179 patients before double-row suture bridge RCR (mean age at surgery, 60.0 years; 63% male patients) at a single institution. All patients underwent RCR with all-suture anchor fixation for the medial row and solid anchor fixation for the lateral row. Preoperative (baseline) and follow-up (minimum follow-up time of 2 years; mean, 2.5 years) clinical outcomes were compared using the American Shoulder and Elbow Surgeons (ASES) score and a 10-point numeric pain rating scale (NPRS). We calculated the proportions of patients meeting previously published Patient Acceptable Symptom State (PASS) thresholds for the ASES (≥78.0) and NPRS (≤1.7). We further compared baseline and follow-up outcome scores and the proportions of patients meeting PASS thresholds using paired t tests and McNemar tests, respectively, and calculated effect size to quantify the magnitude of change from baseline to follow-up.

Results

Values significantly improved from baseline to follow-up for ASES (from 45.3 ± 19.8 to 87.3 ± 17.1) and NPRS (from 5.2 ± 2.5 to 1.4 ± 2.1). The proportion of patients meeting PASS thresholds also significantly improved for the ASES (from 6% to 77%) and the NPRS (from 7% to 72%). The magnitude of baseline to follow-up change for all measures was large (all effect sizes ≥1.5).

Conclusion

Our study demonstrated excellent short-term clinical outcomes and substantial improvements for patients undergoing double-row suture bridge RCR with all-suture anchors for medial row fixation.

Current Understanding and New Advances in the Surgical Management of Reparable Rotator Cuff Tears: A Scoping Review

Rotator cuff (RC) tears are among the most common musculoskeletal disorders and can be associated with pain, weakness, and shoulder dysfunction. In recent years, there have been significant advances with regard to the understanding of rotator cuff disease and its management. With technological improvements and advanced diagnostic modalities, there has been much progress as to improved understanding of the pathology. Similarly, with advanced implant designs and instrumentation, operative techniques have evolved. Furthermore, refinements in postoperative rehabilitation protocols have improved patient outcomes. In this scoping review, we aim to provide an overview of the current knowledge on the treatment of rotator cuff disorders and to highlight recent advances in its management.

Management of Massive Rotator Cuff Tears Without Arthropathy

Arthroplasty is not an optimal treatment for massive rotator cuff tears in patients who are active and without glenohumeral arthritis. Several surgical techniques have been developed for these patients, including arthroscopic rotator cuff repair with single-/double-row repair (with or without interval slides, margin convergence, graft augmentation), graft bridging, superior capsular reconstruction, tuberoplasty, and tendon transfers. Complete, tension-free, anatomic repair is ideal; however, tendon atrophy and retraction associated with massive tears often complicate repairs. All surgical treatments significantly increase patient-reported functional outcomes 1 year after intervention, with many treatments demonstrating improved mid-term and long-term outcomes. [Orthopedics. 2023;46(1):e1-e12.].

Patient-Determined Outcomes After Arthroscopic Margin Convergence Rotator Cuff Repair

Purpose

To determine whether patients who require margin convergence would have equivalent postsurgical patient-determined scores compared with patients with standard rotator cuff repair. The secondary purpose of this study was to determine whether the short-term results found for patients with margin convergence repairs would be durable through medium-term follow-up.

Methods

A retrospective analysis of patients undergoing arthroscopic rotator cuff repair was performed to examine the effects of marginal convergence on patient-determined outcomes (Western Ontario Rotator Cuff Index, American Shoulder and Elbow Surgeons score, Simple Shoulder Test, Single Assessment Numeric Evaluation, and Shoulder Activity Level). Patient-determined outcomes in patients who had margin convergence repairs were compared with patients who had standard rotator cuff repair. Prospective follow-up of patients that had margin convergence repairs was performed to determine whether patient-determined outcomes deteriorated over time.

Results

Two-hundred-seventy-two patients had standard rotator cuff repairs and 9 patients had margin convergence rotator cuff repair (3.2%). All patients had significant improvements in their Western Ontario Rotator Cuff Index, American Shoulder and Elbow Surgeons score, Simple Shoulder Test, and Single Assessment Numeric Evaluation. Patients requiring margin convergence rotator cuff repair had similar preoperative and postoperative scores compared with patients with a standard rotator cuff repair. At a mean follow-up of 7.5 years, there was no change in outcome scores compared with the early follow-up time point (mean 3.3 years) for patients undergoing margin convergence.

Conclusions

Arthroscopic margin convergence repair techniques along with the treatment of concomitant pathologies result in similar patient-determined outcomes compared with standard rotator cuff repair techniques. These results appear to be durable and do not deteriorate from short-term to medium-term follow-up.

Level of evidence

III: Retrospective comparative study.

Mobility Assessment of the Supraspinatus in a Porcine Cadaver Model Using a Sensor-Enhanced, Arthroscopic Grasper

Tendon mobility is highly relevant in rotator cuff surgery. Objective data about rotator cuff mobility is rare. Tendon mobility still needs to be evaluated subjectively by the surgeon. This study aims to establish a porcine animal model for mobility analysis of the supraspinatus. In this context, we introduce a sensor-enhanced, arthroscopic grasper (SEAG) suitable for objective intraoperative measurements of tendon mobility in clinical praxis. Tendon mobility of 15 fresh porcine cadaver shoulders with artificial rotator cuff tears was evaluated using the SEAG. Mobility characteristics (load–displacement curves, maximum load, stiffness) were studied and inter- and intraobserver agreement (intraclass correlation coefficient (ICC)) were tested. Factors with a potential adverse effect (plastic deformation and rigor mortis) were also evaluated. All shoulders showed characteristic reproducible load–displacement curves with a nonlinear part at the start, followed by a linear part. Mean maximum load was 28.6 N ± 12.5. Mean stiffness was 6.0 N/mm ± 2.6. We found substantial interobserver agreement (ICC 0.672) and nearly perfect intraobserver agreement (0.944) for maximum load measurement. Inter- (0.021) and intraobserver (0.774) agreement for stiffness was lower. Plastic deformation and rigor mortis were excluded. The animal model demonstrates reliable and in vivo-like measurements of tendon mobility. The SEAG is a reliable tool for tendon mobility assessment.

Arthroscopic Repair of a "U" Shaped Rotator Cuff Tear: Modified Margin Convergence with a Single Triple-loaded Suture Anchor

Introduction Repair of a "U" shaped rotator cuff tear tends to create extreme tensile forces at the central part of the rotator cuff margin, causing tensile overload and may result in subsequent failure. We describe our technique of repairing the "U" shaped tear in which margin convergence is done using Ethibond (Ethicon Inc., New Jersey) and a single triple-loaded suture anchor. It results in the reduction of the strain and also allows the repair of seemingly irreparable tears. Patients and method We included 10 patients having a "U" shaped degenerative rotator cuff tear. All patients were assessed preoperatively. The University of California at Los Angeles Shoulder score (UCLA shoulder score) recorded preoperatively and at final follow-up was used to assess functional outcome. Result Out of 10 patients, six were males and four were females. The mean age was 60 years (range 50-70 years). The average follow-up was for 31 months (range 24 - 48 months). The UCLA score increased from an average of 9 preoperatively (range 8 - 12) to an average of 29.6 (range 27 - 31) at the terminal follow-up. The UCLA increased in the postoperative period and was statistically significant (unpaired t-test; p < 0.0001). All patients had good/excellent outcomes (UCLA score > 27). Abduction increased from average 27 degree preoperatively (range 20 degree - 35 degree) to an average 131 degree (range 125 degree - 140 degree) at final follow-up (unpaired t-test; p < 0.0001). Conclusion Our technique of modified margin convergence achieves low tension repair and anatomical footprint reconstruction with good clinical outcomes using a single triple-loaded anchor.

Arthroscopic Side-to-side Repair for Large U-shaped Full-Thickness Rotator Cuff Tears: Is the Repair Integrity Actually Maintained?

PURPOSE

To evaluate the clinical and structural outcomes of arthroscopic side-to-side repair of large U-shaped full-thickness rotator cuff tears (FTRCTs) by assessing the functional score of the patients and the integrity of the tendon repair using magnetic resonance imaging with a minimum follow-up duration of 2 years.

METHODS

In this case series, 59 consecutive patients who underwent arthroscopic side-to-side repair of large U-shaped FTRCTs, with a minimum follow-up duration of 2 years (range 25 to 72 months), were retrospectively enrolled. The mean patient age was 58.6 years. Patients' functional scores and integrity of the tendon repairs were evaluated.

RESULTS

The mean visual analog scale score improved from 5.7 ± 2.1 preoperatively to 2.4 ± 1.3 postoperatively (P < .001). The mean range of motion (forward flexion) improved from 152.7° ± 11.4° to 164.5° ± 9.5° (P < .001). The mean Constant-Murley score improved from 57.3 ± 7.2 preoperatively to 77.8 ± 6.9 postoperatively (P < .001). Postoperative magnetic resonance imaging examinations demonstrated cuff integrity with a retear rate of 54.2%. The retear rate of patients who underwent anchor fixation to the medial row (45%) was significantly lower than that of patients who underwent simple side-to-side repair (73.7%) (P = .039). The University of California at Los Angeles shoulder rating and Constant-Murley scores were not significantly different between the healed and retear groups (P = .639 and P = .863, respectively).

CONCLUSIONS

Arthroscopic side-to-side repair of large U-shaped FTRCTs demonstrated satisfactory clinical outcomes. However, the retear rate was higher than expected when simple side-to-side fixation was performed without footprint fixation. Therefore, medial row fixation is recommended if arthroscopic side-to-side repair is performed.

LEVEL OF EVIDENCE

III, comparative therapeutic trial.

Treatment Strategy for Irreparable Rotator Cuff Tears

Recently, patients with shoulder pain have increased rapidly. Of all shoulder disorders, rotator cuff tears (RCTs) are most prevalent in the middle-aged and older adults, which is the primary reason for shoulder surgery in the population. Some authors have reported that up to 30% of total RCTs can be classified as irreparable due to the massive tear size and severe muscle atrophy. In this review article, we provide an overview of treatment methods for irreparable massive RCTs and discuss proper surgical strategies for RCTs that require operative management.

Preoperative Radiographic Risk Factors for Incomplete Arthroscopic Supraspinatus Tendon Repair in Massive Rotator Cuff Tears

PURPOSE

To determine if preoperative imaging findings of massive rotator cuff (RC) tears were associated with (1) incomplete arthroscopic repair and (2) the use of advanced mobilization techniques (interval slides) and/or the use of a load-sharing rip stop repair construct.

METHODS

Eighty-six consecutive patients who underwent arthroscopic repair for massive RC tears performed by a single surgeon between July 2013 and July 2015 were retrospectively evaluated. Previously proposed radiographic risk factors for irreparability (acromiohumeral distances, tangent sign, and the Goutallier stage of fatty infiltration for the supraspinatus) were analyzed. Associations between preoperative imaging characteristics and intraoperative results of RC surgery were determined using binary logistic regressions and Fisher's exact tests. The interobserver reliability of imaging characteristics was determined using intraclass correlation coefficients (ICCs).

RESULTS

Seventy-six massive RC tears were fully reparable (88%). In the case of 10 RC tears (12%), a complete repair was not obtained. Inability to obtain a complete repair of the supraspinatus was associated with a positive tangent sign (30% irreparable) versus a negative tangent sign (6.3% irreparable, odds ratio [OR] = 6.3, P = .0102) and with Goutallier grade 3-4 fatty infiltration of the supraspinatus (42.9% irreparable) versus grade 0-2 fatty infiltration (5.7% irreparable, OR = 11.8, P = .001). Advanced arthroscopic techniques (interval slides or load-sharing rip stop) for dealing with poor-quality or retracted tendon were used in 62% of cases; however, no associations were found between preoperative imaging characteristics and these techniques. Interobserver reliability was moderate (ICC = 0.75-0.90) for the tangent sign (ICC = 0.78) and high-grade (Goutallier 3-4) fatty infiltration of the supraspinatus (ICC = 0.74).

CONCLUSIONS

A positive tangent sign and/or high-grade fatty infiltration (Goutallier 3-4) of the supraspinatus were risk factors for incomplete RC repair. However, these were not completely predictive of reparability because the majority of massive RC tears with these imaging characteristics were still fully reparable.

LEVEL OF EVIDENCE

Level IV, therapeutic case series.

Biodegradable spacer reduces the subacromial pressure: A biomechanical cadaver study

BACKGROUND

Failure after rotator cuff repair remains a major clinical problem and could be related to excessive pressures from the acromion. Previous studies with irreparable tears showed good clinical results of tendon healing with arthroscopic insertion of a protective biodegradable spacer balloon between the repaired tendon and the acromion. One hypothesis is that compression pressures on the repaired tendon will be reduced by the spacer. This cadaver study aimed to investigate the effects of this subacromial spacer on compression pressures over a repaired supraspinatus tendon in passive motion.

METHODS

Rotator cuff tear and repair were performed in six fresh-frozen cadaveric shoulders, followed by insertion of a biodegradable subacromial spacer. Specimens were tested using a passive shoulder simulator for abduction-adduction, flexion-extension and internal-external rotations. A sensor positioned below the acromion was used to measure compression pressure changes through passive range of motion before and after placement of a subacromial spacer. Peak pressures were measured in adduction-abduction motion, near 90° abduction.

FINDINGS

Both the mean and peak pressures in abduction-adduction were significantly reduced after insertion of the subacromial spacer (from mean 121.7 (SD 9.5) MPa to 51.5 (SD 1.2) MPa and from peak 1749.6 (SD 80.7) MPa to 535.1 (SD 27.6) MPa) (P<0.0001).

INTERPRETATION

The reduced peak pressures and wider load distributions over the sensor during both passive abduction-adduction and flexion-extension motions suggest that the use of the spacer will lead to reduced wear of the repair in patients, and potentially prevent rotator cuff re-tear after surgical repair.

Medialized repair for retracted rotator cuff tears

BACKGROUND

The purpose of this study was to evaluate the functional outcomes of medialized rotator cuff repair and the continuity of repaired tendon in chronic retracted rotator cuff tears.

METHODS

Thirty-five consecutive patients were selected from 153 cases that underwent arthroscopic rotator cuff repair for more than medium-sized posterosuperior rotator cuff tears between July 2009 and July 2012 performed with the medialized repair. All cases were available for at least 2 years of postoperative follow-up. The visual analog scale of pain, muscle strength, Constant score, American Shoulder and Elbow Surgeons (ASES) score, and University of California-Los Angeles score were evaluated.

RESULTS

At the final follow-up, all clinical outcomes were significantly improved. The visual analog scale score for pain improved from 6 ± 1 preoperatively to 2 ± 1 postoperatively. The range of motion increased from preoperatively to postoperatively: active forward elevation, from 134° ± 49° to 150° ± 16°; active external rotation at the side, from 47° ± 15° to 55° ± 10°; and active internal rotation, from L3 to L1. The shoulder score also improved: Constant score, from 53.5 ± 16.7 to 79 ± 10; American Shoulder and Elbow Surgeons score, from 51 ± 15 to 82 ± 8; and University of California-Los Angeles score, from 14 ± 4 to 28 ± 4. The retear cases at the final follow-up were 6 (17%).

CONCLUSIONS

Medialized repair may be useful in cases in which anatomic bone-to-tendon repair would be difficult because of the excessive tension of the repaired tendon and a torn tendon that does not reach the anatomic insertion.

Clinical Relevance of Classifying Massive Rotator Cuff Tears: Results Based on Functional and Radiological Findings After Arthroscopic Repair

BACKGROUND

Studies on the results of arthroscopic repair of massive rotator cuff tears have reported widely varied prognoses. Among other factors, the sizable discrepancy can be attributable to the fact that the current definition of massive rotator cuff tears covers an extensive area of tendons.

HYPOTHESIS

Functional and radiological results according to subgroups would show significant inter-subgroup differences preoperatively and postoperatively.

STUDY DESIGN

Cohort study; Level of evidence, 2.

METHODS

A total of 104 patients who required arthroscopic repair for massive rotator cuff tears were prospectively evaluated. The patients were allocated into 3 groups according to tendon involvement as diagnosed by preoperative magnetic resonance imaging: group 1 (anterosuperior type involving the subscapularis and supraspinatus), group 2 (posterosuperior type involving the infraspinatus and supraspinatus), and group 3 (anteroposterior type involving the subscapularis, supraspinatus, and infraspinatus). We compared functional results (at 2 years postoperatively) and radiological findings (at 1 year postoperatively) for each group.

RESULTS

There were 34 patients in group 1, 54 in group 2, and 16 in group 3. In all 3 groups, functional results significantly improved after surgery. There were no statistically significant intergroup differences in functional results among the 3 groups. On the radiological evaluations, each group (groups 1, 2, and 3) showed a significantly different result in the preoperative acromiohumeral distance (AHD) (7.19, 5.44, and 5.22 mm, respectively), tear size (38.8, 39.3, and 46.4 mm, respectively), extent of retraction (33.9, 40.0, and 41.4 mm, respectively), postoperative AHD (8.92, 7.37, and 6.71 mm, respectively), and retear rate (23.5%, 51.9%, and 56.2%, respectively) ( P < .001 for all).

CONCLUSION

Massive rotator cuff tears can be divided into 3 types: anterosuperior (group 1), posterosuperior (group 2), and anteroposterior (group 3). Each group has distinctive characteristics and shows different results in the preoperative AHD, tear size, extent of retraction, postoperative AHD, and retear rate, which provide a reasonable basis for categorization. So far, massive rotator cuff tears have only been broadly defined, consequently being understood as a single category by many. However, to clearly understand and evaluate this injury, we suggest identifying differences within the category through proper subclassification.

Biomechanical Effect of Margin Convergence Techniques: Quantitative Assessment of Supraspinatus Muscle Stiffness

Although the margin convergence (MC) technique has been recognized as an option for rotator cuff repair, little is known about the biomechanical effect on repaired rotator cuff muscle, especially after supplemented footprint repair. The purpose of this study was to assess the passive stiffness changes of the supraspinatus (SSP) muscle after MC techniques using shear wave elastography (SWE). A 30 × 40-mm U-shaped rotator cuff tear was created in 8 cadaveric shoulders. Each specimen was repaired with 6 types of MC technique (1-, 2-, 3-suture MC with/without footprint repair, in a random order) at 30° glenohumeral abduction. Passive stiffness of four anatomical regions in the SSP muscle was measured based on an established SWE method. Data were obtained from the SSP muscle at 0° abduction under 8 different conditions: intact (before making a tear), torn, and postoperative conditions with 6 techniques. MC techniques using 1-, or 2-suture combined with footprint repair showed significantly higher stiffness values than the intact condition. Passive stiffness of the SSP muscle was highest after a 1-suture MC with footprint repair for all regions when compared among all repair procedures. There was no significant difference between the intact condition and a 3-suture MC with footprint repair. MC techniques with single stitch and subsequent footprint repair may have adverse effects on muscle properties and tensile loading on repair, increasing the risk of retear of repairs. Adding more MC stitches could reverse these adverse effects.

Biomechanical Role of Capsular Continuity in Superior Capsule Reconstruction for Irreparable Tears of the Supraspinatus Tendon

BACKGROUND

Patients with irreparable rotator cuff tears have a defect of the superior capsule, which creates discontinuity of the shoulder capsule in the transverse direction (anterior-posterior direction). This effect is one of the causes underlying shoulder instability after rotator cuff tears.

PURPOSE/HYPOTHESIS

The purpose of this study was to assess the effects of anterior and posterior continuity on shoulder biomechanics after superior capsule reconstruction (SCR). The hypothesis was that capsular continuity in the transverse direction would improve glenohumeral stability after SCR.

STUDY DESIGN

Controlled laboratory study.

METHODS

Seven fresh-frozen cadaveric shoulders were tested by using a custom shoulder testing system. Subacromial peak contact pressure, glenohumeral superior translation, glenohumeral compression force, and glenohumeral range of motion (ROM) were compared among 5 conditions: (1) intact shoulder, (2) simulated irreparable supraspinatus tendon tear, (3) SCR without side-to-side suturing, (4) SCR with posterior side-to-side suturing, and (5) SCR with both anterior and posterior side-to-side suturing.

RESULTS

The creation of an irreparable supraspinatus tear significantly increased glenohumeral superior translation (0° of abduction: 254% of intact [P = .04]; 30° of abduction: 200% of intact [P = .04]) and subacromial peak contact pressure (0° of abduction: 302% of intact [P = .0001]; 30° of abduction: 239% of intact [P = .0006]), decreased glenohumeral compression force (0° of abduction: 85% of intact [P = .004]; 30° of abduction: 87% of intact [P = .0002]; 60° of abduction: 88% of intact [P = .0001]), and increased total ROM (0° of abduction: 16° increase [P = .008]). SCR without side-to-side suturing significantly decreased subacromial peak contact pressure (0° of abduction: 79% of intact [P = .0001]; 30° of abduction: 91% of intact [P = .001]; 60° of abduction: 55% of intact [P = .04]) but did not inhibit glenohumeral superior translation. By adding posterior side-to-side sutures, both glenohumeral superior translation (0° of abduction: 93% of intact [P = .02]; 30° of abduction: 110% of intact [P = .04]) and subacromial peak contact pressure decreased significantly (0° of abduction: 56% of intact [P = .0001]; 30° of abduction: 83% of intact [P = .0003]; 60° of abduction: 46% of intact [P = .04]). Neither SCR with nor SCR without side-to-side suturing ameliorated the tear-associated decrease in glenohumeral compression force and increase in total ROM. Adding anterior side-to-side sutures did not change any measurements compared with SCR with posterior side-to-side suturing.

CONCLUSION

SCR with side-to-side suturing completely restored the superior stability of the shoulder joint by establishing posterior continuity between the graft, residual infraspinatus tendon, and underlying shoulder capsule.

CLINICAL RELEVANCE

Side-to-side suturing between the graft, residual infraspinatus tendon, and underlying shoulder capsule is recommended for SCR in patients with irreparable supraspinatus tendon tears to restore superior stability after surgery.

Intratendinous rotator cuff tears: prevalence and clinical and radiological outcomes of arthroscopically confirmed intratendinous tears at midterm follow-up

BACKGROUND

Intratendinous tears of the rotator cuff are rare, and little has been written about them.

PURPOSE

To investigate the prevalence and clinical and radiological outcomes of arthroscopically confirmed intratendinous tears treated with transtendon suture bridge repair.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

Included in the study were 33 patients (16 male, 17 female; mean age, 53.4 years) with arthroscopically confirmed intratendinous tears treated with transtendon suture bridge repair from March 2006 to July 2012. A history of trauma was found in 10 cases (30.3%). The dominant arm was involved in 26 cases (78.8%). The mean follow-up duration was 56 months. Preoperatively, a thorough physical examination was performed; at final follow-up, shoulder range of motion (ROM) in forward flexion, abduction, external rotation (ER) at the side, and internal rotation (IR) at the back was noted, and clinical outcomes (American Shoulder and Elbow Surgeons [ASES] score; University of California, Los Angeles [UCLA] score; visual analog scale [VAS] for pain; and Simple Shoulder Test [SST]) were recorded and compared with the preoperative data. Postoperative magnetic resonance imaging (MRI) was performed at 6 months to investigate rotator cuff healing status and repair integrity.

RESULTS

The prevalence of arthroscopically confirmed intratendinous tears was 4.7% among all arthroscopically treated partial-thickness rotator cuff tears. Impingement signs were positive in most of the patients (positive Hawkins-Kennedy test result in 78.8%, positive Neer sign in 66.7%, and either positive Hawkins-Kennedy test result or Neer sign in 84.8%). At final follow-up, mean ASES, UCLA, VAS, and SST scores improved significantly from a preoperative mean of 51.4, 18.9, 6.0, and 5.4, respectively, to a postoperative mean of 90.6, 32.9, 1.4, and 10.8, respectively (P < .001). According to the UCLA rating scale, outcomes were excellent in 17, good in 13, and fair in 3 cases. Shoulder ROM in forward flexion, abduction, ER at the side, and IR at the back improved from a preoperative mean of 135°, 129°, 25°, and L2, respectively, to a postoperative mean of 161°, 160°, 29°, and T10, respectively (P < .001 for all except ER). As per the Sugaya classification, on postoperative MRI, type I healing status was found in 10 (30.3%), type II in 18 (54.5%), and type III in 2 (6.1%) cases. None of the patients showed any evidence of retears.

CONCLUSION

Transtendon suture bridge repair yielded satisfactory clinical and radiological outcomes in patients with intratendinous rotator cuff tears.

Ultrasound evaluation of arthroscopic full-thickness supraspinatus rotator cuff repair: single-row versus double-row suture bridge (transosseous equivalent) fixation. Results of a prospective, randomized study

BACKGROUND

The purpose of this study was to compare the structural outcomes of a single-row rotator cuff repair and double-row suture bridge fixation after arthroscopic repair of a full-thickness supraspinatus rotator cuff tear.

MATERIAL AND METHODS

We evaluated with diagnostic ultrasound a consecutive series of ninety shoulders in ninety patients with full-thickness supraspinatus tears at an average of 10 months (range, 6-12) after operation. A single surgeon at a single hospital performed the repairs. Inclusion criteria were full-thickness supraspinatus tears less than 25 mm in their anterior to posterior dimension. Exclusion criteria were prior operations on the shoulder, partial thickness tears, subscapularis tears, infraspinatus tears, combined supraspinatus and infraspinatus repairs and irreparable supraspinatus tears. Forty-three shoulders were repaired with single-row technique and 47 shoulders with double-row suture bridge technique. Postoperative rehabilitation was identical for both groups. Ultrasound criteria for healed repair included visualization of a tendon with normal thickness and length, and a negative compression test.

RESULTS

Eighty-three patients were available for ultrasound examination (40 single-row and 43 suture-bridge). Thirty of 40 patients (75%) with single-row repair demonstrated a healed rotator cuff repair compared to 40/43 (93%) patients with suture-bridge repair (P = .024).

CONCLUSION

Arthroscopic double-row suture bridge repair (transosseous equivalent) of an isolated supraspinatus rotator cuff tear resulted in a significantly higher tendon healing rate (as determined by ultrasound examination) when compared to arthroscopic single-row repair.

Arthroscopic repair of massive contracted rotator cuff tears: aggressive release with anterior and posterior interval slides do not improve cuff healing and integrity

BACKGROUND

Few studies of large-to-massive contracted rotator cuff tears have examined the arthroscopic complete repair obtained by a posterior interval slide and whether the clinical outcomes or structural integrity achieved are better than those after partial repair without the posterior interval slide.

METHOD

The study included forty-one patients with large-to-massive contracted rotator cuff tears, not amenable to complete repair with margin convergence alone. The patients underwent either arthroscopic complete repair with a posterior interval slide and side-to-side repair of the interval slide edge (twenty-two patients; Group P) or partial repair with margin convergence (nineteen patients; Group M). The patient assignment was not randomized. The Simple Shoulder Test (SST), American Shoulder and Elbow Surgeons (ASES) score, University of California at Los Angeles (UCLA) shoulder score, and range of motion were used to compare the functional outcomes. Preoperative and six-month postoperative magnetic resonance arthrography (MRA) images were compared within or between groups.

RESULTS

At the two-year follow-up evaluation, the SST, ASES score, UCLA score, and range of motion had significantly improved (p < 0.001 for all) in both groups. However, no significant differences were detected between groups. Even though the difference in preoperative tear size on MRA images was not significant, follow-up MRA images identified a retear in twenty patients (91%) in Group P and a significant difference in tear size between groups (p = 0.007).

CONCLUSIONS

The complete repair group with an aggressive release had no better clinical or structural outcomes compared with the partial repair group with margin convergence alone for large-to-massive contracted rotator cuff tears. In addition, the complete repair group had a 91% retear rate and a greater defect on follow-up MRA images. Even though this study had a relatively short-term follow-up, a complete repair of large-to-massive contracted rotator cuff tears, with an aggressive release such as posterior interval slide, may not have an increased benefit compared with partial repair without posterior interval slide.

Repair integrity and functional outcomes for arthroscopic margin convergence of rotator cuff tears

BACKGROUND

We evaluated the clinical outcomes of arthroscopic margin convergence for rotator cuff tears.

METHODS

Twenty-four consecutive patients with full-thickness rotator cuff tears, in which the free tendon edge could not be reduced to the footprint after the release and mobilization of the rotator cuff tendon, were included. Rotator cuff repair integrity was determined by magnetic resonance imaging or ultrasonography after the operation. The mean age and follow-up period for the patients were 59.6 years (range, forty-eight to seventy-three years) and 30.6 months (range, twenty-four to sixty months), respectively. Five outcome measures were used before surgery and at the time of the final follow-up: a visual analog scale (VAS) pain score, the American Shoulder and Elbow Surgeons (ASES) score, the Shoulder Rating Scale of the University of California Los Angeles (UCLA), the Constant-Murley score, and the range of shoulder motion.

RESULTS

The follow-up rate for imaging was 95.8%, and the follow-up rate for clinical evaluation was 91.7%. The mean UCLA score (and standard deviation) improved from 17.4 ± 5.5 preoperatively to 31.6 ± 4.0 at the time of the final follow-up (p < 0.001). The mean ASES score improved from 54.9 ± 23.3 to 91.3 ± 11.8, respectively (p < 0.001). The mean Constant-Murley score improved from 45.9 ± 17.6 to 79.1 ± 12.6 (p < 0.001). The mean VAS score improved from 6.5 ± 1.7 to 1.3 ± 1.5 (p < 0.001). The mean range of motion (forward flexion) improved from 117.9° ± 37.7° to 166.8° ± 16.7° (p < 0.001). The postoperative imaging examinations showed cuff integrity without a retear in 52.2% of the shoulders. However, the UCLA, ASES, and Constant-Murley scores were not significantly different between healed and unhealed groups (p = 0.800, p = 0.322, and p = 0.597, respectively).

CONCLUSIONS

Reducing tension by margin convergence followed by a repair of the resulting free edge to bone has reasonable short-term clinical results but a substantial retear rate (47.8%). However, the retears tended to be smaller than the original tear size. No significant difference was observed in the short-term clinical results between the groups with or without a retear.

Restoration of shoulder biomechanics according to degree of repair completion in a cadaveric model of massive rotator cuff tear: importance of margin convergence and posterior cuff fixation

BACKGROUND

Complete repair in massive rotator cuff tear may not be possible, allowing for only partial repair. However, the effect of partial repair on glenohumeral biomechanics has not been evaluated. Therefore, the purpose of this study was to compare the rotational range of motion (ROM), glenohumeral kinematics, and gap formation at the repaired tendon edge following massive cuff tear and repair according to the degree of repair completion.

HYPOTHESIS

Posterior fixation will restore the altered biomechanics of massive rotator cuff tear.

STUDY DESIGN

Controlled laboratory study.

METHODS

Eight cadaveric shoulders were tested at 0°, 30°, and 60° of abduction in the scapular plane. Muscle loading was applied based on physiological muscle cross-sectional area ratios. Maximum internal (MaxIR) and external rotations (MaxER) were measured. Humeral head apex (HHA) position and gap formation at the repaired tendon edge were measured using a MicroScribe from MaxIR to MaxER in 30° increments. Testing was performed for intact, massive cuff tear, complete repair, and 4 types of partial repair. A repeated-measures analysis of variance was used to determine significant differences.

RESULTS

Massive tear significantly increased ROM and shifted HHA superiorly in MaxIR at all abduction angles (P < .05). The complete repair restored ROM to intact (P < .05), while all partial repairs did not. Abnormal HHA elevation due to massive tear was restored by all repairs (P < .05). Release of the anterior single row alone and release of the marginal convergence significantly increased gap formation at the anterior tendon edge (P < .05).

CONCLUSION

This study emphasizes the importance of anterior fixation in massive cuff tear to restore rotational range of motion and decrease gap formation at the repaired tendon edge and of posterior fixation to restore abnormal glenohumeral kinematics due to massive cuff tear.

CLINICAL RELEVANCE

If complete repair of massive cuff tear is not possible, posterior cuff (infraspinatus) repair is necessary to restore abnormal glenohumeral kinematics, and margin convergence anteriorly is recommended to decrease gap formation of the repaired tendon edge, which may provide a better biomechanical environment for healing.

Comparison of the tendon damage caused by four different anchor systems used in transtendon rotator cuff repair

Objectives. The objective of this study was to compare the damage to the rotator cuff tendons caused by four different anchor systems. Methods. 20 cadaveric human shoulder joints were used for transtendon insertion of four anchor systems. The Healix Peek, Fastin RC, Bio-Corkscrew Suture, and Healix Transtend anchors were inserted through the tendons using standard transtendon procedures. The areas of tendon damage were measured. Results. The areas of tendon damage (mean ± standard deviation, n = 7) were 29.1 ± 4.3 mm² for the Healix Peek anchor, 20.4 ± 2.3 mm² for the Fastin RC anchor, 23.4 ± 1.2 mm² for the Bio-Corkscrew Suture anchor, 13.7 ± 3.2 mm² for the Healix Transtend anchor inserted directly, and 9.1 ± 2.1 mm² for the Healix Transtend anchor inserted through the Percannula system (P < 0.001 or P < 0.001, compared to other anchors). Conclusions. In a cadaver transtendon rotator cuff repair model, smaller anchors caused less damage to the tendon tissues. The Healix Transtend implant system caused the least damage to the tendon tissues. Our findings suggest that smaller anchors should be considered when performing transtendon procedures to repair partial rotator cuff tears.

Arthroscopic repair of large and massive rotator cuff tears using the side-to-side suture technique. Mid-term clinical and anatomic evaluation

PREAMBLE: Arthroscopic repair is our treatment of choice for massive rotator cuff tears. In order to reduce tension, we perform a side-to-side suture technique. The purpose of our work was to study the outcome of such technique by evaluating functional score and rotator cuff integrity using ultrasound at 2-year follow-up.

HYPOTHESIS

The "side-to-side" arthroscopic repair of large and massive rotator cuff tears provides a long-term continuity of rotator cuff mechanism, enhances function and relieves pain with low morbidity.

TYPE OF STUDY

Retrospective monocenter study.

MATERIAL AND METHODS

We included a continuous series of 50 patients of mean age 66.6 years (46-80), operated on between January 2007 and March 2008 for full-thickness retracted tears of the supraspinatus extending or not to the infraspinatus tendon. Management consisted of arthroscopic subacromial bursectomy, acromioplasty and side-to-side repair of the rotator cuff tendons with secure anchor fixation to the tuberosity. The relative Constant score was used for clinical evaluation preoperatively and at a minimum of 24 months after surgery. The continuity of rotator cuff mechanism was evaluated using ultrasound.

RESULTS

The mean relative Constant score improved significantly (p<0.05) from 40% (18-67) preoperatively to 91.7% (40-107) postoperatively. Fifty-six percent of the rotator cuffs from this series demonstrated continuity with a postoperative relative Constant score of 98.4% (74-121) and an increase in the shoulder strength score of 3.6 kg (1-6). Forty-four percent of the rotator cuffs had recurrent tear with an overall relative Constant score of 83.6% (4-126) and we did not observe any improvement in the strength score in this sub-group. Eighty-eight percent of the patients were satisfied or very satisfied with their outcome.

DISCUSSION

At a minimum 24-month follow-up, the side-to-side suturing technique reported excellent functional results with a very high satisfaction rate. For these large and massive rotator cuff tears sometimes considered as irreparable, ultrasound confirmed the continuity of the repair in 56% of the cases. Unhealed patients were not disadvantaged since they experienced pain relief and functional improvement. However, in this sub-group of patients, recovery of shoulder strength was poor.

LEVEL OF EVIDENCE

Level IV.

Mechanisms of fatty degeneration in massive rotator cuff tears

Fatty degeneration of chronically injured muscle is a commonly recognized consequence of massive rotator cuff tears. Current surgical treatments are unable to alter or reverse the progression of fatty degeneration and are associated with poor functional outcomes in these patients. Therefore, a better understanding of the pathophysiology of fatty degeneration is required. As such, recent discoveries in stem cell biology and new animal models have significantly advanced our understanding of the cellular and molecular basis of fatty degeneration. Future studies will facilitate development of novel treatments to prevent the progression of fatty degeneration and improve muscle regeneration in patients with massive rotator cuff tears.

Treatment of irreparable rotator cuff tears

Irreparable rotator cuff tears are a challenging problem for patients and surgeons. There are several treatment options, but deciding the correct one for each patient can be difficult. Treatment options include physical therapy, arthroscopy, muscle transfers, reverse shoulder arthroplasty, and hemiarthroplasty. An understanding of the patient's chief complaint and their functional ability to elevate their arm above horizontal should guide the treatment. This article reviews the current literature on various treatment options for irreparable rotator cuff tears, then outlines an algorithm for determining treatment.

Platelet rich plasma in arthroscopic rotator cuff repair: a prospective RCT study, 2-year follow-up

HYPOTHESIS

Local application of autologous platelet rich plasma (PRP) improves tendon healing in patients undergoing arthroscopic rotator cuff repair.

STUDY DESIGN

Prospective, randomized, controlled, double blind study; considering an alpha level of 5%, a power of 80%, 22 patients for group are needed.

MATERIALS AND METHODS

Fifty-three patients who underwent shoulder arthroscopy for the repair of a complete rotator cuff tear were randomly divided into 2 groups, using a block randomization procedure. A treatment group (N = 26) consisted of those who received an intraoperative application of PRP in combination with an autologous thrombin component. A control group (N = 27) consisted of those who did not receive that treatment. Patients were evaluated with validated outcome scores. A magnetic resonance image (MRI) was performed in all cases at more than 1 year post-op. All patients had the same accelerated rehabilitation protocol.

RESULTS

The 2 groups were homogeneous. The pain score in the treatment group was lower than the control group at 3, 7, 14, and 30 days after surgery (P < .05). On the Simple Shoulder Test (SST), University of California (UCLA), and Constant scores, strength in external rotation, as measured by a dynamometer, were significantly higher in the treatment group than the control group at 3 months after surgery (strength in external rotation [SER]: 3 ± 1.6 vs 2.1 ± 1.3 kg; SST: 8.9 ± 2.2 vs 7.1 ± 2.7; UCLA: 26.9 ± 3 vs 24.2 ± 4.9; Constant: 65 ± 9 vs 57.8 ± 11; P < .05). There was no difference between the 2 groups after 6, 12, and 24 months. The follow-up MRI showed no significant difference in the healing rate of the rotator cuff tear. In the subgroup of grade 1 and 2 tears, with less retraction, SER in the PRP group was significant higher at 3, 6, 12, and 24 months postoperative (P < .05).

CONCLUSION

The results of our study showed autologous PRP reduced pain in the first postoperative months. The long-term results of subgroups of grade 1 and 2 tears suggest that PRP positively affected cuff rotator healing.

Biomechanical evaluation of margin convergence

PURPOSE

The aim of this study was to examine rotator cuff strain and gap size after margin convergence was performed for a large retracted rotator cuff tear.

METHODS

We tested 20 cadaveric shoulders using a custom shoulder testing system. A large retracted rotator cuff tear was created by removing the supraspinatus muscle-tendon unit to provide a reproducible model. Margin convergence was performed and strain was measured by use of differential variable reluctance transducers in the intact state, after a massive rotator cuff tear was created, and after each of 5 margin convergence sutures were placed. Data were obtained at 0° and 60° of abduction and with internal and external rotational torques applied to the humerus. Gap size was measured before and after margin convergence sutures were placed.

RESULTS

Strain was significantly reduced at all degrees of rotation in 0° of abduction after margin convergence sutures were placed (P < .05). There was a significantly significant decrease in gap size with each suture: 50% with the first suture, 60% with the second suture, 67% with the third suture, and 75% with the fourth suture (P < .05). There was only minimal intrinsic rotator cuff tension during knot tying, with each subsequent suture having less of an effect than the previous. Four margin convergence sutures resulted in a mean of 5 mm of anterior humeral head translation.

CONCLUSIONS

There was a significant decrease in rotator cuff strain and gap size after margin convergence was performed for a large retracted tear. The first margin convergence suture caused the greatest increase in intrinsic rotator cuff tension, with each subsequent suture having a similar but less dramatic effect.

CLINICAL RELEVANCE

Biomechanical rationale exists for the use of margin convergence in large retracted rotator cuff tears.

Clinical and radiological outcome of conservative vs. surgical treatment of atraumatic degenerative rotator cuff rupture: design of a randomized controlled trial

Background

Subacromial impingement syndrome is a frequently observed disorder in orthopedic practice. Lasting symptoms and impairment may occur when a subsequent atraumatic rotator cuff rupture is also present. However, degenerative ruptures of the rotator cuff can also be observed in asymptomatic elderly individuals. Treatment of these symptomatic degenerative ruptures may be conservative or surgical. Acceptable results are reported for both treatment modalities. No evidence-based level-1 studies have been conducted so far to compare these treatment modalities. The objective of this study is to determine whether there is a difference in outcome between surgical reconstruction and conservative treatment of a degenerative atraumatic rotator cuff tendon rupture.

Methods/Design

A randomized controlled trial will be conducted. Patients aged between 45 and 75 with a symptomatic atraumatic rotator cuff rupture as diagnosed by MRI will be included. Exclusion criteria are traumatic rotator cuff rupture, frozen shoulder and diabetes mellitus. Patients will be randomized into two groups. Conservative treatment includes physical therapy according to a standardized protocol, NSAIDs and, if indicated, subacromial infiltration with a local anesthetic and corticosteroids. Surgical reconstruction is performed under general anesthesia in combination with an interscalenus plexus block. An acromioplasty with reconstruction of the rotator cuff tendon is performed, as described by Rockwood et al. Measurements take place preoperatively and 6 weeks, 3 months, 6 months and 1 year postoperatively. The primary outcome measure is the Constant score. Secondary measures include both disease-specific and generic outcome measures, and an economic evaluation. Additionally, one year after inclusion a second MRI will be taken of all patients in order to determine whether extent and localization of the rupture as well as the amount of fatty degeneration are prognostic factors.

Discussion

Both surgical as conservative treatment of a symptomatic atraumatic rotator cuff tendon rupture is used in current practice. There is a lack of level-1 studies comparing surgical vs. conservative treatment. This randomized controlled trial has been designed to determine whether the surgical treatment of a degenerative atraumatic rotator cuff tendon rupture may lead to a better functional and radiological outcome than conservative treatment after one year of follow-up.

Trial registration number

Netherlands Trial Register (NTR): NTRTC2343

Mattress suture-bridge technique for bursal-side partial-thickness rotator cuff tears

The standard procedure used to repair partial-thickness tears involves initial progression of the lesion to a full-thickness tear prior to tendon repair. However, the option for a bursal-side partial-thickness rotator cuff tear includes the preservation of as much of the remaining intact fibers as possible. Instead of inserting suture anchors in the medial row, as in the conventional suture-bridge technique, two mattress sutures are inserted into the rotator cuff. Full-thickness access is achieved using a percutaneous spinal needle and medial mattress sutures to preserve the articular bone attachment of the remnant fibers and to compress the repaired tendon on the footprint. Our method can help preserve the remnant rotator cuff tendon without tissue damage and can restore the normal rotator cuff footprint.

Arthroscopic transtendon suture-bridge technique for concurrent articular- and bursal-side partial-thickness rotator cuff tears

The transtendon suture-bridge technique is primarily indicated in concurrent articular- and bursal-side partial-thickness rotator cuff tears. The articular aspect of the footprint is restored using the transtendon technique while maintaining the remaining lateral footprint of the rotator cuff. The bursal aspect of the footprint is restored via the suture-bridge technique using the tied suture stands, after applying the transtendon technique while maintaining the remaining medial footprint of the rotator cuff. Using a combination of the transtendon and suture-bridge techniques, the articular and bursal aspects of the footprint are restored while maintaining the remaining footprint of the rotator cuff.

Reversal of suprascapular neuropathy following arthroscopic repair of massive supraspinatus and infraspinatus rotator cuff tears

PURPOSE

The purpose of this study was to study the prevalence of suprascapular neuropathy (SSN) in the setting of massive rotator cuff tears and to determine if arthroscopic rotator cuff repair, even if partial, was associated with reversal of SSN and clinical improvement in pain and function.

METHODS

Over a 13-month period, 26 of 216 patients with rotator cuff tears treated operatively were identified to have massive tears associated with retraction and moderate to severe fatty infiltration of the supraspinatus and infraspinatus muscles. All patients had pain and marked weakness in abduction and external rotation which did not improve with conservative treatment. Electrodiagnostic electromyographic/nerve conduction velocity (EMG/NCV) evaluation, as well as pre- and postoperative questionnaire and physical examination, were performed. An arthroscopic repair, either partial or complete, was performed on patients identified to have a massive rotator cuff tear in association with SSN.

RESULTS

Fourteen of 26 patients with massive rotator cuff tears (54%) were identified to have a peripheral nerve injury. Seven of these 26 (38%) had isolated suprascapular nerve injury, 4 had axillary nerve injury, 2 had an associated upper trunk brachial plexus injury, and 1 had a cervical radiculopathy. All 7 patients with isolated suprascapular injury underwent arthroscopic treatment, 1 of which was not technically reparable at the time of surgery. In the 6 patients who underwent either partial or complete arthroscopic repair, follow-up EMG/NCV after 6 months demonstrated partial or full recovery of the suprascapular nerve palsy that correlated with complete pain relief and marked improvement in function.

CONCLUSIONS

SSN is found in a significant proportion of patients with massive rotator cuff tears, and is associated with pain and dysfunction. Arthroscopic rotator cuff repair can result in reversal of SSN, which may correlate with substantial improvement in pain and function.

LEVEL OF EVIDENCE

Level IV, case series.

Repair of large supraspinatus rotator-cuff defects by infraspinatus and subscapularis tendon transfers in a cadaver model

Transosseous repair of a supraspinatus tendon (SSP) defect (Patte size II) can be difficult if the tendon is retracted and the muscle atrophied. In this situation alternatives are margin convergence techniques, local tendon transfers or distant tendon transfers in massive tears. The object of this study was to compare two local tendon transfers in terms of the feasibility of the shift, the area covered by the shift and the force needed to accomplish the shift. Thirteen fresh-frozen cadaver shoulders were used. First a supraspinatus defect extending to the apex of the humeral head (Patte size II) was created. Transosseous repair was attempted with the infraspintus (ISP) and with the subscapularis (SCP) in all cases; repair was successful in all ISP cases, while use of the SCP resulted in a successful repair in only 8 of the 13 (61.5%). A significantly (P=0.012) larger defect area was covered by the ISP transfer than by the SCP shift: 89.7+/-8.5% versus 31.2+/-31.1% of the original defect, respectively. The tensile force needed to accomplish the shift was significantly (P=0.004) lower when the ISP was used (15+/-11 N) than with the SCP (37.1+/-15 N). In this cadaver model the ISP shift proved more favourable than the SCP shift for covering a Patte size II SSP defect.

Partial-thickness rotator cuff tears

Partial-thickness tears of the rotator cuff have been diagnosed with increased frequency because of a heightened awareness of the condition by clinicians and improved diagnostic methods. Research into the causes, natural history, and optimal treatment of this condition lags behind that of full-thickness tears. However, despite the limitations in the existing literature, there has emerged a consensus among shoulder experts that partial-thickness rotator cuff tears should be aggressively treated in the active athlete because of the unfavorable natural history of these lesions and success of accepted surgical algorithms. This review will provide an overview of the theories regarding the origins of partial-thickness rotator cuff tears, discuss the relative accuracy of accepted diagnostic techniques, and summarize the indications and methods of operative repair with an emphasis on the results of various treatment approaches.