Electrofluorochromism in π-conjugated ionic liquid crystals

Triphenylamine-Based Covalent Organic Framework Films for Dopamine-Responsive Electrofluorochromism

Covalent organic framework (COF) film with electrofluorochromic (EFC) and electrochromic (EC) properties has been synthesized by using triphenylamine-based monomers. The film exhibited a high maximum fluorescence contrast of 151 when subjected to a drive voltage of 0.75 V vs the Ag/AgCl electrode, causing the fluorescence to be quenched, which resulted in the EFC process's "fluorescence off" state. The switching times for the fluorescence on and off states were 0.51 and 7.79 s, respectively. Over the same voltage range, the COF film also displayed EC properties, achieving a contrast of 50.23% and a coloration efficiency of 297.4 cm2 C-1 at 532 nm, with switching times of 18.6 s for coloration and 0.7 s for bleaching. Notably, the quenched fluorescence of the COF film could be restored by adding dopamine as a reductant. This phenomenon enabled the implementation of a NAND logic gate using the applied potential as a physical input and dopamine addition as a chemical input. This study demonstrates the successful development of COF films with bifunctional EFC and EC properties, showcasing their potential for use in constructing advanced optoelectronic devices.

Biomimetic Exploration and Reflection on Switchable Coordination and Narrow-Band Electrofluorochromic Devices

Electrofluorochromic (EFC) materials and devices with controllable fluorescence properties show great application potential in advanced anticounterfeiting, information storage and display. However, the low color purity caused by the broad emission spectra and underperforming switching time of the existing EFC materials limit their application. Through biomimetic exploration and the study of reversible electrochemical responsive coordination reactions, boron-nitrogen embedded polyaromatics (B,N-PAHs) with narrow-band emission and high color purity have been successfully integrated into EFC systems, which also help to better understand the role of boron in biological activity. The EFC device achieve good performance containing quenching efficiency greater than 90% within short switching time (ton: 0.6 s, toff: 2.4 s), and nearly no performance change after 200 cycles test. Three primary color (red, green, and blue) EFC devices are successfully prepared. In addition, new phenomena are obtained and discussed in this biomimetic exploration of related boron reactions. The success and harvest of this exploration are expected to provide new ideas for optimizing properties and broadening applications of EFC materials. Moreover, it may provide ideas and reference significance for further exploring and understanding the function of boron compounds in biological systems.

Anion-Rocking Chair Batteries with Tuneable Voltage using Viologen- and Phenothiazine Polymer-based Electrodes

Organic battery electrode materials offer the unique opportunity for full cells to operate in an anion-rocking chair mode. For this configuration a pair of p-type redox-active electrode materials is required with a substantial potential gap between their redox processes. We herein investigate viologen-functionalized polystyrenes as negative electrode paired with a phenothiazine polymer as positive electrode in all-organic full cells. The 10 % crosslinked viologen polymer X10 -PVBV gave better performance than the linear PVBV and was employed in a full cell as negative electrode with cross-linked poly(3-vinyl-N-methylphenothiazine) (X-PVMPT) as positive electrode. Three cell configurations regarding the voltage range were investigated, of which one with an operating potential of 0.9 V gave the highest performance. The full cell delivered a specific discharge capacity of 64 mA h g-1 (of X-PVMPT) in the first cycle and a capacity retention of 79 % after 100 cycles. This is one of only few reported anion rocking chair all-organic cells and the first employing a phenothiazine-based positive electrode material.

Stimuli-fluorochromic smart organic materials

Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.

Allochroic cluster light-emitting diodes based on unique μ3-tetraphosphine Cu3X3 crowns with tunable excited states

Multicomponent excited states endow copper iodide clusters with allochroic properties under diverse stimuli. However, crystal states are required, and cluster stimulus sensitivity hampers electroluminochromism. We developed PhQPCu3X3 (X = Cl, Br, and I) with the first μ3-bridging tetraphosphine ligand, whose Cu3X3 crowns were exposed to external stimulus. The increased proportion of Cu3X3 results in equal contributions of cluster- and ligand-centered components to excited states, the former of which is highly sensitive to grind, vapor, and, especially, electric stimuli, due to semi-exposed Cu3X3. Through vacuum evaporation and vapor fumigation of cluster-based emissive layers, the diodes' electroluminescence colors changed from yellow to white. Joule heat during device operation induced further color variation to orange, corresponding to Commission Internationale de l'Eclairage coordinates of PhQPCu3I3 changed from (0.44 ± 0.1, 0.34 ± 0.1) to (0.57 ± 0.1, 0.42 ± 0.1). These results demonstrate the superiority of luminescent clusters in accurate excited-state modulation, holding promise for wide applications.

An Ultrafast, Energy-Efficient Electrochromic and Thermochromic Device for Smart Windows

Smart windows nowadays undertake the esteemed obligation of reducing energy consumption as well as upgrading living experience. This project aims to devise a smart window that responds to both electricity and heat, with the intention of achieving energy efficiency, privacy preservation, and enhanced decorative attributes. Through the implementation of a novel electrochromic material design, coupled with the optimization of electrochromic devices (ECDs), a high-performance ECD is obtained, demonstrating coloring/bleaching time of 0.53/0.16 s, a transmittance modulation of 78% (from 99% to 21%), and superior performance in six dimensions. Furthermore, temperature-responsive units and an ionic liquid are incorporated into the electrolyte system to create a novel thermochromic gel electrolyte with transmittance modulation from 80% to 0%, and excellent thermal insulation (6.4 °C reduction). Ultimately, an electro- and thermochromic device is developed, featuring an ultrafast color-switching speed of 0.82/0.60 s and multiple working modes. Overall, this work showcases a prospective design pathway for the development of next-generation ultrafast-switching, and energy-efficient intelligent windows.

Does thermotropic liquid crystalline self-assembly control biological activity in amphiphilic amino acids? - tyrosine ILCs as a case study

Amphiphilic amino acids represent promising scaffolds for biologically active soft matter. In order to understand the bulk self-assembly of amphiphilic amino acids into thermotropic liquid crystalline phases and their biological properties a series of tyrosine ionic liquid crystals (ILCs) was synthesized, carrying a benzoate unit with 0-3 alkoxy chains at the tyrosine unit and a cationic guanidinium head group. Investigation of the mesomorphic properties by polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray diffraction (WAXS, SAXS) revealed smectic A bilayers (SmA_d) for ILCs with 4-alkoxy- and 3,4-dialkoxybenzoates, whereas ILCs with 3,4,5-trisalkoxybenzoates showed hexagonal columnar mesophases (Col_h), while different counterions had only a minor influence. Dielectric measurements revealed a slightly higher dipole moment of non-mesomorphic tyrosine-benzoates as compared to their mesomorphic counterparts. The absence of lipophilic side chains on the benzoate unit was important for the biological activity. Thus, non-mesomorphic tyrosine benzoates and crown ether benzoates devoid of additional side chains at the benzoate unit displayed the highest cytotoxicities (against L929 mouse fibroblast cell line) and antimicrobial activity (against Escherichia coli ΔTolC and Staphylococcus aureus) and promising selectivity ratio in favour of antimicrobial activity.

Tris(boranil) Columnar Liquid Crystalline Fluorophores: pseudo-Triphenylene Boron(III) Complexes with Peripheral N-B-O Linkages

The borate complexes derived from salicylaldimine ligands, called boranils, possess a wide range of photophysical and electronic characteristics intrinsically. The unique combination of molecular rigidity, rendered by four-coordinate boron bridges, and extended π-conjugation enable them to serve as technically feasible fluorescent materials (dyes). The incorporation of liquid crystallinity in these boron(III) complexes, especially the columnar (Col) mesomorphism, which is overlooked hitherto, would provide a new dimension to these complexes. Herein, we report the first examples of tris(boranil) discotic liquid crystal (LC) dyes that have been readily synthesized by treating tris(N-salicylideneaniline)s, (TSAN)s, with BF₃ .Et₂ O in the presence of an acid quencher. These C₃ -symmetric borate complexes self-assemble into the Col phase, existing over a wide thermal span including room temperature. The 2D periodic order of the Col phases shows dependence on the length of the peripheral tails. The photophysical measurements reveal the fluorescence emission in their two condensed states viz., solid and Col phase, and in solution. Their electrochemical, two-step oxidation process coupled with the aforesaid features upholds their significance in applied research.

The Rainbow Arching over the Fluorescent Thienoviologen Mesophases

Thermofluorochromic materials exhibit tunable fluorescence emission on heating or cooling. They are highly desirable for applications ranging from temperature sensing to high-security anti-counterfeiting. Luminescent matrices based on liquid crystals are very promising, particularly those based on liquid crystals with intrinsic fluorescence. However, only a few examples have been reported, suggesting ample margins for development in the field, due to the wide range of fluorophores and supramolecular organizations to be explored. Moreover, thermofluorochromic liquid crystals can be tailored with further functionalities to afford multi-stimuli responsive materials. For the first time, herein we report the thermofluorochromism of thienoviologen liquid crystals, already known to show bulk electrochromism and electrofluorochromism. In particular, we studied their photophysics in the 25 °C-220 °C range and as a function of the length of the N-linear alkyl chains, m (9 ≤ m ≤ 12 C atoms), and the type of anion, X (X = OTs^-, OTf^-, BF₄^-, NTf₂^-). Interestingly, by changing the parameters m, X and T, their fluorescence can be finely tuned in the whole visible spectral range up to the NIR, by switching among different mesophases. Importantly, by fixing the structural parameters m and X, an interesting thermofluorochromism can be achieved for each thienoviologen in a homologous series, leading to a switch of the emitted light from red to green and from white to blue as a consequence of the temperature-induced variation in the supramolecular interactions in the self-assembled phases.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Manipulating Electroluminochromism Behavior of Viologen-Substituted Iridium(III) Complexes through Ligand Engineering for Information Display and Encryption

Electrically controlling photoluminescence has attracted great research interest and offers many opportunities for technological developments. Electroluminochromic materials undergo redox reactions under low-voltage stimuli to achieve reversible luminescence switching. Till now, photoluminescence switching of a single molecule caused by electrical stimuli is restricted to intensity response because the redox-active moieties are good electron donors or acceptors and electrical stimuli can regulate the photoinduced electron-transfer and affect the luminescence intensity. In this work, the manipulation of the electroluminochromism behavior of a series of viologen-substituted iridium(III) complexes through the regulation of ligand orbital energy levels and electronic communication between the viologen pendants and the iridium(III) complex core is reported. Electrochemical redox reactions reversibly modulate either the luminescence quenching effect or the push-pull electronic effect of the viologen substituents, achieving multicolor "on-off" luminescence response toward electrical stimuli and luminescence manipulation between two emissive states with different wavelengths and lifetimes. To illustrate the promising applications of these electroluminochromic materials, recording and displaying luminescence information under electrical stimuli are demonstrated. Information encryption is realized by letting the electroluminochromism occur in the near-infrared region or in the time domain. Near-infrared camera or time-resolved luminescence analysis can be used to help read the invisible information.

AIE-active macromolecules: designs, performances, and applications

Aggregation-induced emission (AIE) macromolecules as emerging luminescent materials gained increasing attention owing to their good processability, high brightness, wide functionality, and smart responsiveness, with great potential in many fields.

Current Topics in Ionic Liquid Crystals

Ionic liquid crystals (ILCs), that is, ionic liquids exhibiting mesomorphism, liquid crystalline phases, and anisotropic properties, have received intense attention in the past years. Among others, this is due to their special properties arising from the combination of properties stemming from ionic liquids and from liquid crystalline arrangements. Besides interesting fundamental aspects, ILCs have been claimed to have tremendous application potential that again arises from the combination of properties and architectures that are not accessible otherwise, or at least not accessible easily by other strategies. The current review highlights recent developments in ILC research, starting with some key fundamental aspects. Further subjects covered include the synthesis and variations of modern ILCs, including the specific tuning of their mesomorphic behavior. The review concludes with reflections on some applications that may be within reach for ILCs and finally highlights a few key challenges that must be overcome prior and during true commercialization of ILCs.

The Contribution of Density Functional Theory to the Atomistic Knowledge of Electrochromic Processes

In this review, we provide a brief overview of the contribution that computational studies can offer to the elucidation of the electronic mechanisms responsible for the electrochromism phenomenon, through the use of the density functional theory (DFT) and its time-dependent formulation (TDDFT). Although computational studies on electrochromic systems are not as numerous as those for other physico-chemical processes, we will show their reliability and ability to predict structures, excitation energies, and redox potentials. The results confirm that these methods not only help in the interpretation of experimental data but can also be used for the rational design of molecules with interesting electrochromic properties to be initiated for synthesis and experimental characterization.

Stimuli-Responsive AIEgens

The unique advantages and the exciting application prospects of AIEgens have triggered booming developments in this area in recent years. Among them, stimuli-responsive AIEgens have received particular attention and impressive progress, and they have been demonstrated to show tremendous potential in many fields from physical chemistry to materials science and to biology and medicine. Here, the recent achievements of stimuli-responsive AIEgens in terms of seven most representative types of stimuli including force, light, polarity, temperature, electricity, ion, and pH, are summarized. Based on typical examples, it is illustrated how each type of systems realize the desired stimuli-responsive performance for various applications. The key work principles behind them are ultimately deciphered and figured out to offer new insights and guidelines for the design and engineering of the next-generation stimuli-responsive luminescent materials for more broad applications.

Printable Off-On Thermoswitchable Fluorescent Materials for Programmable Thermally Controlled Full-Color Displays and Multiple Encryption

Thermoswitchable fluorescent materials (TFMs) have received special attention due to their unique fluorescent colorimetric responses to temperature. Conventional TFMs generally display unicolor with switching from one color to another, showing unprintable and unsatisfied performances. These limitations greatly hinder their development and expansion toward advanced applications. Herein, the superior integration of full-color, off-on switching mode, printability, and high performance to TFMs is achieved successfully. The success is due to a thermally induced synchronous "dual/multichannel" stimulus-response mode regulated by a self-crystalline phase-change material; that is, synergistic changes of the molecular existence states and subsequent colors/spectra of the fluorescent modifier and fluorophores, accompanied by corresponding high-efficiency on-off switching of Förster resonance energy transfer. These TFMs are simple to prepare and show good performance, such as high fluorescence emission contrast (>100), great reversibility (>200 cycles), and easy-to-adjust response temperature. Particularly, these R/G/B TFMs can be prepared as tricolor fluorescent inks, and thus full-color emissions on flexible substrate can be easily obtained by printing. Finally, their great potential in switchable dynamic interior decoration, programmatic temperature-control information display, and senior information encryption are illustrated. This successful exploration offers a new perspective for designing and optimizing various other switchable materials with higher comprehensive performances.

Cationic Organophosphorus Chromophores: A Diamond in the Rough among Ionic Dyes

Tunable electron-accepting properties of the cationic phosphorus center, its geometry and unique preparative chemistry that allows combining this unit with diversity of π-conjugated motifs, define the appealing photophysical and electrochemical characteristics of organophosphorus ionic chromophores. This Minireview summarizes the achievements in the synthesis of the π-extended molecules functionalized with P-cationic fragments, modulation of their properties by means of structural modification, and emphasizes the important effect of cation-anion interactions, which can drastically change physical behavior of these two-component systems.

Mixed-Valence Compounds as a New Route for Electrochromic Devices with High Coloration Efficiency in the Whole Vis-NIR Region

Electrochromic devices (ECDs) that allow the modulation of light transmission are very attractive in the research field of energy saving. Here all-in-one gel switchable ECDs based on mixed-valence electroactive compounds were developed. The use of the thienoviologen/ferrocene couple as cathode and anode, respectively, leads to a significant electrochromic band in the visible range (550–800 nm), with a color change from yellow to green, and to a lower band in the NIR region (1000–1700 nm), due to the presence of one electroactive-chromic species. Replacement of the electroactive ferrocene with a fluorene-diarylamine electroactive-chromic species, allows to extend and intensify the absorption in the NIR region, thus affording modulation of the solar radiation from 500 up to 2200 nm. High optical contrast, fast coloration and bleaching times and outstanding coloration efficiencies were measured for all observed absorption bands upon the application of small potential differences (1.4 V < DV < 2 V).

Functional Ionic Liquid Crystals

Ionic liquid crystals have emerged as a new class of functional soft materials in the last two decades, and they exhibit synergistic characteristics of ionic liquids and liquid crystals such as macroscopic orientability, miscibility with various species, phase stability, nanostructural tunability, and polar nanochannel formation. Owing to these characteristics, the structures, properties, and functions of ionic liquid crystals have been a hot topic in materials chemistry, finding various applications including host frameworks for guest binding, separation membranes, ion-/proton-conducting membranes, reaction media, and optoelectronic materials. Although several excellent review articles of ionic liquid crystals have been published recently, they mainly focused on the fundamental aspects, structures, and specific properties of ionic liquid crystals, while these applications of ionic liquid crystals have not yet been discussed at one time. The aim of this feature article is to provide an overview of the applications of ionic liquid crystals in a comprehensive manner.

Multicolored Cathodically Coloring Electrochromism and Electrofluorochromism in Regioisomeric Star-Shaped Carbazole Dibenzofurans

In this work, a series of fluorescent cathodically coloring electrochromic (EC) small molecules o-, m-, and p-DBFDCz with 3,5-di(9H-carbazol-9-yl)benzene (DCz) linked to dibenzofuran (DBF) at different substitutional positions were synthesized and fully characterized. These compounds are electroactive and undergo quasi-reversible two-step single-electron reduction generating radical anions and dianions. The absorptions of o-, m-, and p-DBFDCz in the neutral states lie in the UV region (λ_onset ≈ 350 nm), showing high transparency, while the absorption of their reduced states can be largely tuned across the visible region through driving voltage and substitutional positions. Initially generated spectroelectrochemically radical anions show absorption in the short-wavelength region of ∼380-500 nm with weak broad absorptions at longer wavelengths. On further reduction, these bands disappear on the cost of growing intense bands from dianions at longer wavelengths of 500-700 nm with some tail absorptions in the shorter-wavelength region. This renders the colors of the EC devices based on these materials, which are changed from green to red, yellow to magenta, and light to deep blue for o-, m-, and p-DBFDCz, respectively, covering four legs of the L*a*b* color space. Besides excellent optical contrast (>90%) and high coloration efficiency (up to 504 cm² C^-1), the fluorescence observed in solution of neutral o-, m-, and p-DBFDCz can be modulated between the fluorescence and quenched states by direct electrochemical redox reactions. Both EC and electrofluorochromic (EFC) processes are reversible on cycling. This research demonstrates the feasibility of developing multifunctional EC/EFC materials with multicolored electrochromism through exploiting electrochemical properties of traditional fluorescent small molecules.

Dual-Switching Electrochromism and Electrofluorochromism Derived from Diphenylamine-Based Polyamides with Spirobifluorene/Pyrene as Bridged Fluorescence Units

Electrochromic (EC)/electrofluorochromic (EFC) bifunctional materials are receiving great attention because of their promising applications in optoelectronic devices. However, the development of ideal EC/EFC bifunctional materials is still a great challenge because of the poor integration of EC/EFC performances (optical contrast, response speed, and switching stability). Herein, we reported two novel diphenylamine-based mixed valence (MV) polyamides (S-HPA and P-HPA) with spirobifluorene (2,7-positions) and pyrene (1,6-positions) as bridged fluorescence units, respectively, showing impressive cyclability and fluorescence contrast with rapid switching. Through the formation of an effective electronic coupling between the two nitrogen centers using spirobifluorene/pyrene bridges, we demonstrated that different bridges have significant effects on the thermal and electrooptical characteristics of polyamides. In addition to lower fluorescence quantum yield and glass transition temperature, the S-HPA exhibited superior cyclability (contrast change <3.4%/14% over 500/300 cycles for EC/EFC switching), higher color/fluorescence contrast (64%/304%), and faster switching time (<2.6 s), mainly owing to the shorter conjugated length and more twisted configuration of the spirobifluorene bridge. The design principle of MV polymers with fluorophore bridges proposed here will be a promising way to realize high-performance EC/EFC devices and will also provide new insights into their future development and applications.

1,8-Dioxapyrene-based electrofluorochromic supramolecular hyperbranched polymers

A 1,8-dioxapyrene-based electrofluorochromic supramolecular polymer was constructed through the coordination of terpyridine ligands with Eu³⁺ ions. The polymer can be used in anti-counterfeiting inks.

A viologen-based multifunctional Eu-MOF: photo/electro-modulated chromism and luminescence

A novel viologen-based multifunctional Eu-MOF integrating photochromism, photomodulated fluorescence, and electrochromic and electroluminochromic properties was investigated.

Percolation Phase Transition from Ionic Liquids to Ionic Liquid Crystals

Due to their complex molecular structures and interactions, phase behaviors of complex fluids are quite often difficult to be identified by common phase transition analysis methods. Percolation phase transition, on the other hand, only monitors the degree of connection among particles without strict geometric requirements such as translational or orientational order, and thus suitable for pinpointing phase transitions of complex fluids. As typical complex fluids, ionic liquids (ILs) exhibit phases beyond the description of simple liquid theories. In particular, with an intermediate cationic side-chain length, ILs can form the nanoscale segregated liquid (NSL) state, which will eventually transform into the ionic liquid crystal (ILC) structure when the side chains are adequately long. However, the microscopic mechanism of this transformation is still unclear. In this work, by means of coarse-grained molecular dynamics simulation, we show that, with increasing cationic side-chain length, some local pieces of non-polar domains are gradually formed by side chains aligned in parallel inside the NSL phase, before an abrupt percolation phase transition happens when the system transforms into the ILC phase. This work not only identifies that the NSL to ILC phase transition is a critical phenomenon, but also demonstrates the importance of percolation theory to complex fluids.

High-Performance Electrofluorochromic Switching Devices Using a Novel Arylamine-Fluorene Redox-Active Fluorophore

Fluorescent light modulation by small electric potentials has gained huge interest in the past few years. This phenomenon, called electrofluorochromism, is of the utmost importance for applications in optoelectronic devices. Huge efforts are being addressed to developing electrofluorochromic systems with improved performances. One of the most critical issue is their low cyclability, which hampers their widespread use. It mostly depends on the intrinsic reversibility of the electroactive/fluorophore molecular system and on device architecture. Here we show a novel fluorene-based mixed-valence electrofluorochromic system that allows direct electrofluorochromic switching and exhibits incomparable electrochemical reversibility and device cyclability of more than 10 000 cycles.

Substituted Azolium Disposition: Examining the Effects of Alkyl Placement on Thermal Properties

We describe the thermal phase characteristics of a series of 4,5-bis(n-alkyl)azolium salts that were studied using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarized-light optical microscopy (POM), and synchrotron-based small- to wide-angle X-ray scattering (SWAXS) measurements. Key results were obtained for 1,3-dimethyl-4,5-bis(n-undecyl)imidazolium iodide (1-11), 1,3-dimethyl-4,5-bis(n-pentadecyl)- imidazolium iodide (1-15), and 1,2,3-trimethyl-4,5-bis(n-pentadecyl)imidazolium iodide (2), which were found to adopt enantiotropic smectic A mesophases. Liquid-crystalline mesophases were not observed for 1,3-dimethyl-4,5-bis(n-heptyl)imidazolium iodide (1-7), 3-methyl-4,5-bis(n-penta-decyl)thiazolium iodide (3), and 2-amino-4,5-bis(n-pentadecyl)imidazolium chloride (4). Installing substituents in the 4- and 5-positions of the imidazolium salts appears to increase melting points while lowering clearing points when compared to data reported for 1,3-disubstituted analogues.

Electroluminochromic Materials: From Molecules to Polymers

Electroluminochromism is an interesting property found in certain classes of molecules and polymers whose photoluminescence can be modulated through the application of an external electrical bias. Unlike electrochromic materials, electroluminochromic counterparts and their applications are comparatively fewer in quantity and are less established. Nonetheless, there prevails an increasing interest in this class of electro-active materials due to their potential applications in optoelectronics, such as smart-displays, and chemical and biological sensing. This review seeks to showcase the different classes of electroluminochromic materials with focus on (i) organic molecules, (ii) transition metal complexes, and (iii) organic polymers. The mechanisms and electroluminochromic performance of these classes of materials are summarized. This review should allow scientists to have a better and deeper understanding of materials design strategies and, more importantly, structure-property relationships and, thus, develops electroluminochromic materials with desired performance in the future.

Synthesis and thermotropic properties of new green electrochromic ionic liquid crystals

New liquid crystal viologens, which exhibit green electrochromic behavior in the LC phase, rarely observed for small molecules, have been developed.

Electrofluorochromism at the single-molecule level

The interplay between the oxidation state and the optical properties of molecules is important for applications in displays, sensors, and molecular-based memories. The fundamental mechanisms occurring at the level of a single molecule have been difficult to probe. We used a scanning tunneling microscope (STM) to characterize and control the fluorescence of a single zinc-phthalocyanine radical cation adsorbed on a sodium chloride–covered gold (111) sample. The neutral and oxidized states of the molecule were identified on the basis of their fluorescence spectra, which revealed very different emission energies and vibronic fingerprints. The emission of the charged molecule was controlled by tuning the thickness of the insulator and the plasmons localized at the apex of the STM tip. In addition, subnanometric variations of the tip position were used to investigate the charging and electroluminescence mechanisms.

AIE-Active Polyamide Containing Diphenylamine-TPE Moiety with Superior Electrofluorochromic Performance

Electrofluorochromism has attracted great attention due to the intelligence optoelectronic and sensing applications. The intrinsically switchable fluorophores with high solid-state fluorescence are regarded as key for ideal electrofluorochromic materials. Here, we reported an AIE-active polyamide with diphenylamine and tetraphenylethylene units, showing high fluorescence quantum yield up to 69.1% for the solid polymer film and stable electrochemical cycling stability. The polyamide exhibited reversible color and emission switching even in hundreds of cycles, and the fluorescence on/off contrast ratio was determined up to 417, which is the highest value to our knowledge. Furthermore, as the response time is vital for the real-life applications, to speed up the response of electrofluorochromism, a porous polymer film was readily prepared through a facile method, notably exhibiting high fluorescence contrast, long-term stability and obviously improved response, due to the sharply increased surface area. Therefore, the AIE-functionalization combining the porous structure strategy will synergistically and dramatically improve the electrofluorochromic performance, which will also promote their practical applications in the near future.

Tuning the Mesomorphism and Redox Response of Anionic-Ligand-Based Mixed-Valent Nickel(II) Complexes by Alkyl-Substituted Quaternary Ammonium Cations

The combination of the redox-active mesogenic anion [Ni^II (Bdt)(BdtSQ)]^- (Bdt=1,2-benzenedithiolato; BdtSQ=1,2-dithia-semi-benzoquinonato) with alkyl-substituted ammonium cations afforded a series of redox-active ionic complexes of the type [NR₄ ][Ni^II (Bdt)(BdtSQ)] [R=nC₁₆ H₃₃ (NC16₄ Ni) and C8,10 (NC8,10₄ Ni); C8,10=6-octylhexadecyl] or [NMe₂ R₂ ][Ni^II (Bdt)(BdtSQ)] [R=nC₁₆ H₃₃ (NMe₂ C16₂ Ni) and C8,10 (NMe₂ C8,10₂ Ni)]. X-ray crystallographic analyses of NMe₂ C16₂ Ni and NC16₄ Ni revealed the formation of cation-dependent integrated ionic layers separated by interdigittated alkyl chains. Complexes NMe₂ C16₂ Ni and NC16₄ Ni commonly form crystalline phases at room temperature, whereas complexes NMe₂ C8,10₂ Ni and NC8,10₄ Ni, which contain branched alkyl chains, form a metastable mesophase and an amorphous phase at the same temperature, respectively. Furthermore, complexes NMe₂ C16₂ Ni, NMe₂ C8,10₂ Ni, and NC16₄ Ni commonly form a smectic A phase (SmA) at 375, 317, and 342 K, respectively. For the four complexes, well-defined cyclic voltammetry responses, derived from ligand-based oxidation and reduction, were observed in solution and the condensed phases, that is, upon casting these complexes on an indium-doped tin oxide working electrode. The present study demonstrates the tunability of the mesomorphism of ionic molecular assemblies composed of alkyl-substituted quaternary ammonium cations, while maintaining the well-defined redox responses of the anions even in the condensed phases.

Functional Liquid Crystals towards the Next Generation of Materials

Since the discovery of the liquid-crystalline state in 1888, liquid crystal science has made great advances through fusion with various technologies and disciplines. Recently, new molecular design strategies and new self-assembled structures have been developed as a result of the progress made in synthetic procedures and characterization techniques. Since these liquid crystals exhibit new functions and properties derived from their nanostructures and alignment, a variety of new functions for liquid crystals, such as transport for energy applications, separation for environmental applications, chromism, sensing, electrooptical effects, actuation, and templating have been proposed. This Review presents recent advances of liquid crystals that should contribute to the next generation of materials.

Effect of counter ions on the mesogenic ionic N-phenylpyridiniums

Two series of ionic liquid crystals (ILCs) derived from N-phenylpyridinium 1–2 were prepared and their mesomorphic properties were investigated.

Design of Viologen-Based Liquid Crystals Exhibiting Bicontinuous Cubic Phases and Their Redox-Active Behavior

We have succeeded in developing viologen-based liquid-crystalline materials forming bicontinuous cubic phases. They are composed of amphiphilic zwitterions with a viologen ionic-head-group and sulfonyl-imide-type acids. In the bicontinuous cubic liquid-crystalline assemblies, the ionic-head groups of the amphiphiles align along a gyroid minimal surface, forming a 3D continuous viologen layer. The ionic state of the viologen-moieties can be tuned from a dication state (V²⁺) to a radical mono cation state (V^1+•) by UV irradiation and/or electric field. This redox reaction proceeds in bulk, accompanying the change of their color from colorless to purple. Interestingly, they preserve the 3D molecular assembled structures beyond the redox reaction, which has been confirmed by polarizing optical microscopy and X-ray diffraction measurements.

Tuning Coulombic interactions to stabilize nematic and smectic ionic liquid crystal phases in mixtures of charged soft ellipsoids and spheres

We have investigated the effect of electrostatic interactions in mixtures of soft ellipsoids and spheres based on the well-known Gay-Berne (GB) and Lennard-Jones (LJ) potential, respectively. These model systems, in their original version, that is without any electrostatic charge, have been thoroughly investigated in the literature both as pure components and mixtures. In particular, mixtures of particles of different shapes, such as spheres and ellipsoids, tend to phase separate because of the excluded volume effects. Common ionic liquid crystals, based on imidazolium or other quaternary ammonium salts, are usually composed of roughly elongated (although flexible) cations and roughly spherical anions, that is, particles with a similar shape such as the GB and LJ models. Therefore, in this work, we present the results of molecular dynamics simulations of mixtures of positively charged GB and negatively charged LJ particles as models of ionic liquid crystals. Interestingly, by modulating the charge of the particles it is possible to stabilize isotropic, nematic, smectic and crystalline ionic phases. The relative weight of Coulomb (a radial, therefore isotropic interaction) and van der Waals (an anisotropic interaction) contributions is a key parameter to tune the stability of various mesophases.

Redox-Responsive Molecular Systems and Materials

Redox reactions can alter the electronic, optical, and magnetic properties of molecules and their ensembles by adding or removing electrons. Here, the developments made over the past 10 years using molecular events are discussed, such as assembly/disassembly, transformation of ensembles, geometric changes, and molecular motions that are designed to be redox-responsive. Considerable progress has occurred in the application of these events to the realization of electronic memory, color displays, actuators, adhesives, and drug delivery. In these cases, systems behave in either a highly or a poorly correlated manner depending on the number of redox-active units involved, based on the method of integration. One of the great advantages of redox-responsive devices and materials is that they have the potential to be readily integrated into existing electronic technologies.

Thiazolothiazole Fluorophores Exhibiting Strong Fluorescence and Viologen-Like Reversible Electrochromism

The synthesis, electrochemical, and photophysical characterization of N,N'-dialkylated and N,N'-dibenzylated dipyridinium thiazolo[5,4-d]thiazole derivatives are reported. The thiazolothiazole viologens exhibit strong blue fluorescence with high quantum yields between 0.8-0.96. The dioctyl, dimethyl, and dibenzyl derivatives also show distinctive and reversible yellow to dark blue electrochromism at low reduction potentials. The fused bicyclic thiazolo[5,4-d]thiazole heterocycle allows the alkylated pyridinium groups to remain planar, strongly affecting their electrochemical properties. The singlet quantum yield is greatly enhanced with quaternarization of the peripheral 4-pyridyl groups (Φ_F increases from 0.22 to 0.96) while long-lived fluorescence lifetimes were observed between 1.8-2.4 ns. The thiazolothiazole viologens have been characterized using cyclic voltammetry, UV-visible absorbance and fluorescence spectroscopy, spectroelectrochemistry, and time-resolved photoluminescence. The electrochromic properties observed in solution, in addition to their strong fluorescent emission properties, which can be suppressed upon 2 e^- reduction, make these materials attractive for multifunctional optoelectronic, electron transfer sensing, and other photochemical applications.