A multifunctional biphasic water splitting catalyst tailored for integration with high-performance semiconductor photoanodes

Light-Induced Quantum Reconfiguration of Oxyhydroxides for Photoanodes with 4.24% Efficiency and Stability Beyond 250 Hours

Photoelectrochemical (PEC) water splitting is attracting significant research interest in addressing sustainable development goals in renewable energy. Current state-of-the-art, however, cannot provide photoanodes with simultaneously high efficiency and long-lasting lifetime. Here, large-scale NiFe oxyhydroxides-alloy hybridized co-catalyst layer that exhibits an applied bias photon-to-current efficiency (ABPE) of 4.24% in buried homojunction-free photoanodes and stability over 250 h is reported. These performances represent an increase over the present highest-performing technology by 408% in stability and the most stable competitor by over 330% in efficiency. These results originate from a previously unexplored mechanism of light-induced atomic reconfiguration, which rapidly self-generates a catalytic-protective amorphous/crystalline heterostructure at low biases. This mechanism provides active sites for reaction and insulates the photoanode from performance degradation. Photon-generated NiFe oxyhydroxides are more than 200% higher than the quantity that pure electrocatalysis would otherwise induce, overcoming the threshold for an efficient water oxidation reaction in the device. While of immediate interest in the industry of water splitting, the light-induced NiFe oxyhydroxides-alloy co-catalyst developed in this work provides a general strategy to enhance further the performances and stability of PEC devices for a vast panorama of chemical reactions, ranging from biomass valorization to organic waste degradation, and CO2-to-fuel conversion.

Photoelectrocatalytic Hydrogen Generation: Current Advances in Materials and Operando Characterization

Photoelectrochemical (PEC) hydrogen generation is a promising technology for green hydrogen production yet faces difficulties in achieving stability and efficiency. The scientific community is pushing toward the development of new electrode materials and a better understanding of the underlying reactions and degradation mechanisms. Advances in photocatalytic materials are being pursued through the development of heterojunctions, tailored crystal nanostructures, doping, and modification of solid-solid and solid-electrolyte interfaces. Operando and in situ techniques are utilized to deconvolute the charge transfer mechanisms and degradation pathways. In this review, both materials development and Operando characterization are covered for advancing PEC technologies. The recent advances made in the PEC materials are first reviewed including the applied improvement strategies for transition metal oxides, nitrites, chalcogenides, Si, and group III-V semiconductor materials. The efficiency, stability, scalability, and electrical conductivity of the aforementioned materials along with the improvement strategies are compared. Next, the Operando characterization methods and cite selected studies applied for PEC electrodes are described. Operando studies are very successful in elucidating the reaction mechanisms, degradation pathways, and charge transfer phenomena in PEC electrodes. Finally, the standing challenges and the potential opportunities are discussed by providing recommendations for designing more efficient and electrochemically stable PEC electrodes.

Understanding the in-situ transformation of CuxO interlayers to increase the water splitting efficiency in NiO/n-Si photoanodes

The buried interface tens of nanometers beneath the solid-liquid junction is crucial for photocarrier extraction, influencing the overall efficiency of photoelectrochemical devices. Precise characterization of the interfacial properties is essential for device optimization but remains challenging. Here, we directly probe the in situ transformation of a CuxO interlayer at the NiO/n-Si interface by hard X-ray photoelectron spectroscopy. It is found that Cu(I) in the CuxO interlayer gradually transforms to Cu(II) with air exposure, forming an energetically more favorable interface and improving photoanode's efficiency. Based on this finding, a reactive e-beam evaporation process is developed for the direct deposition of a CuO interlayer, achieving a half-cell solar-to-hydrogen efficiency of 4.56% for the optimized NiO/CuO/n-Si heterojunction photoanode. Our results highlight the importance of precision characterization of interfacial properties with advanced hard X-ray photoelectron spectroscopy in guiding the design of efficient solar water-splitting devices.

Metal-insulator-semiconductor photoelectrodes for enhanced photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting provides a scalable and integrated platform to harness renewable solar energy for green hydrogen production. The practical implementation of PEC systems hinges on addressing three critical challenges: enhancing energy conversion efficiency, ensuring long-term stability, and achieving economic viability. Metal-insulator-semiconductor (MIS) heterojunction photoelectrodes have gained significant attention over the last decade for their ability to efficiently segregate photogenerated carriers and mitigate corrosion-induced semiconductor degradation. This review discusses the structural composition and interfacial intricacies of MIS photoelectrodes tailored for PEC water splitting. The application of MIS heterostructures across various semiconductor light-absorbing layers, including traditional photovoltaic-grade semiconductors, metal oxides, and emerging materials, is presented first. Subsequently, this review elucidates the reaction mechanisms and respective merits of vacuum and non-vacuum deposition techniques in the fabrication of the insulator layers. In the context of the metal layers, this review extends beyond the conventional scope, not only by introducing metal-based cocatalysts, but also by exploring the latest advancements in molecular and single-atom catalysts integrated within MIS photoelectrodes. Furthermore, a systematic summary of carrier transfer mechanisms and interface design principles of MIS photoelectrodes is presented, which are pivotal for optimizing energy band alignment and enhancing solar-to-chemical conversion efficiency within the PEC system. Finally, this review explores innovative derivative configurations of MIS photoelectrodes, including back-illuminated MIS photoelectrodes, inverted MIS photoelectrodes, tandem MIS photoelectrodes, and monolithically integrated wireless MIS photoelectrodes. These novel architectures address the limitations of traditional MIS structures by effectively coupling different functional modules, minimizing optical and ohmic losses, and mitigating recombination losses.

Updates on Hydrogen Value Chain: A Strategic Roadmap

A strategic roadmap for noncarbonized fuels is a global priority, and the reduction of carbon dioxide emissions is a key focus of the Paris Agreement to mitigate the effects of rising temperatures. In this context, hydrogen is a promising noncarbonized fuel, but the pace of its implementation will depend on the engineering advancements made at each step of its value chain. To accelerate its adoption, various applications of hydrogen across industries, transport, power, and building sectors have been identified, where it can be used as a feedstock, fuel, or energy carrier and storage. However, widespread usage of hydrogen will depend on its political, industrial, and social acceptance. It is essential to carefully assess the hydrogen value chain and compare it with existing solar technologies. The major challenge to widespread adoption of hydrogen is its cost as outlined in the roadmap for hydrogen. It needs to be produced at the levelized cost of hydrogen of less than $2 kg-1 to be competitive with the established process of steam methane reforming. Therefore, this review provides a comprehensive analysis of each step of the hydrogen value chain, outlining both the current challenges and recent advances.

Multiple synergies on cobalt-based spinel oxide nanowires for electrocatalytic oxygen evolution

Cobalt-based spinel oxides have excellent oxygen evolution reaction (OER) activities and are cheap to produce; however, they have limited commercial applications due to their poor electrical conductivities and weak stabilities. Herein, we soaked Co3-xNixO4 nanowires in NaBH4 solutions, which endowed Co3-xNixO4 with significant oxygen vacancy content and decorated BOx motifs outside the Co3-xNixO4 nanowires. X-ray photoelectron spectroscopy and in situ Raman data suggest that these evolutions improved the conductivity, hydrophilicity, and increased active sites of the spinel oxides, which synergistically boosted their overall OER performances. This improved performance made the optimized BOx-covered Co2.1Ni0.9O4 nanowires generate a current density of 10 mA cm-2 when used for the OER at an overpotential of only 307 mV, maintaining excellent stability at 50 mA cm-2 for 24 h. This study provides a facile method for designing cobalt-based spinel oxide OER catalysts.

Surface Reconstruction Facilitated by Fluorine Migration and Bimetallic Center in NiCo Bimetallic Fluoride Toward Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is a critical anodic reaction of electrochemical water splitting, developing a high-efficiency electrocatalyst is essential. Transition metal-based catalysts are much more cost-effective if comparable activities can be achieved. Among them, fluorides are rarely reported due to their low aqueous stability of coordination and low electric conductivity. Herein, a NiCo bimetallic fluoride with good crystallinity is designed and constructed, and significantly enhanced catalytic activity and conductivity are observed. The inevitable oxidation of transition metal ions at high potential and the dissociation of F- are attributed to the low aqueous stability of coordination. The theoretical researches predicte that transition metal fluorides should have a strong tendency to electrochemical reconstruction. Therefore, based on the observations on their electrochemical behavior, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and bode plots, it is further demonstrated that surface reconstruction occurred during the electrochemical process, meanwhile a significant increase of electrochemically active area, which is created by F migration, are also directly observed. Additionally, DFT calculation results show that the electronic structure of the catalysts is modulated by the bimetallic centers, and this reconstruction helps optimizing the adsorption energy of oxygen-containing species and improves OER activity.

An Interface-cascading Silicon Photoanode with Strengthened Built-in Electric Field and Enriched Surface Oxygen Vacancies for Efficient Photoelectrochemical Water Splitting

To promote interfacial charge transfer process and accelerate surface water oxidation reaction kinetics for photoelectrochemical (PEC) water splitting over n-type Silicon (n-Si) based photoanodes, herein, starting with surface stabilized n-Si/CoOx , a NiOx /NiFeOOH composite overlayer was coated by atomic layer deposition and spray coating to fabricate the multilayer structured n-Si/CoOx /NiOx /NiFeOOH photoanode. Encouragingly, the obtained n-Si/CoOx /NiOx /NiFeOOH photoanode exhibits much increased PEC activity for water splitting, with onset potential cathodically shifted to ~0.96 V vs. RHE and photocurrent density increased to 22.6 mA cm-2 at 1.23 V vs. RHE for OER, as compared to n-Si/CoOx , even significantly surpassing the counterpart n-Si/CoOx /NiOx /FeOOH and n-Si/CoOx /NiOx /NiOOH photoanodes. Photophysical and electrochemical characterizations evidence that the deposited CoOx /NiOx /NiFeOOH composite overlayer would create large band bending and strong built-in electric field at the introduced cascading interfaces, thereby producing a large photovoltage of 650 mV to efficiently accelerate charge transfer from the n-Si substrate to the electrolyte for water oxidation. Furthermore, the surface oxygen vacancy enriched NiFeOOH overlayer could effectively catalyze the water oxidation reaction by thermodynamically reducing the energy barrier of rate determining step for OER.

Understanding the reaction mechanism and kinetics of photocatalytic oxygen evolution on CoOx-loaded bismuth vanadate

Photocatalytic water splitting for green hydrogen production is hindered by the sluggish kinetics of oxygen evolution reaction (OER). Loading a co-catalyst is essential for accelerating the kinetics, but the detailed reaction mechanism and role of the co-catalyst are still obscure. Here, we focus on cobalt oxide (CoOx) loaded on bismuth vanadate (BiVO4) to investigate the impact of CoOx on the OER mechanism. We employ photoelectrochemical impedance spectroscopy and simultaneous measurements of photoinduced absorption and photocurrent. The reduction of V5+ in BiVO4 promotes the formation of a surface state on CoOx that plays a crucial role in the OER. The third-order reaction rate with respect to photohole charge density indicates that reaction intermediate species accumulate in the surface state through a three-electron oxidation process prior to the rate-determining step. Increasing the excitation light intensity onto the CoOx-loaded anode improves the photoconversion efficiency significantly, suggesting that the OER reaction at dual sites in an amorphous CoOx(OH)y layer dominates over single sites. Therefore, CoOx is directly involved in the OER by providing effective reaction sites, stabilizing reaction intermediates, and improving the charge transfer rate. These insights help advance our understanding of co-catalyst-assisted OER to achieve efficient water splitting.

Defect Engineered Metal-Organic Framework with Accelerated Structural Transformation for Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) have been increasingly applied in oxygen evolution reaction (OER), and the surface of MOFs usually undergoes structural transformation to form metal oxyhydroxides to serve as catalytically active sites. However, the controllable regulation of the reconstruction process of MOFs remains as a great challenge. Here we report a defect engineering strategy to facilitate the structural transformation of MOFs to metal oxyhydroxides during OER with enhanced activity. Defective MOFs (denoted as NiFc'x Fc1-x ) with abundant unsaturated metal sites are constructed by mixing ligands of 1,1'-ferrocene dicarboxylic acid (Fc') and defective ferrocene carboxylic acid (Fc). NiFc'x Fc1-x series are more prone to be transformed to metal oxyhydroxides compared with the non-defective MOFs (NiFc'). Moreover, the as-formed metal oxyhydroxides derived from defective MOFs contain more oxygen vacancies. NiFc'Fc grown on nickel foam exhibits excellent OER catalytic activity with an overpotential of 213 mV at the current density of 100 mA cm-2 , superior to that of undefective NiFc'. Experimental results and theoretical calculations suggest that the abundant oxygen vacancies in the derived metal oxyhydroxides facilitate the adsorption of oxygen-containing intermediates on active centers, thus significantly improving the OER activity.

Effect of Interfacial SiOx Defects on the Functional Properties of Si-Transition Metal Oxide Photoanodes for Water Splitting

The transfer of photogenerated charges through interfaces in heterojunction photoanodes is a key process that controls the efficiency of solar water splitting. Considering Co3O4/SiOx/Si photoanodes prepared by physical vapor deposition as a representative case study, it is shown that defects normally present in the native SiOx layer dramatically affect the onset of the photocurrent. Electron paramagnetic resonance indicates that the signal of defects located in dangling bonds of trivalent Si atoms at the Si/SiOx interface vanishes upon vacuum annealing at 850 °C. Correspondingly, the photovoltage of the photoanode increases to ≈500 mV. Similar results are obtained for NiO/SiOx/Si photoanodes. Photoelectrochemical analysis and impedance spectroscopy (in solution and in the solid state) indicate how the defect annealing modifies the Co3O4/SiOx/Si junction. This work shows that defect annealing at the solid-solid interface in composite photoanodes strongly improves the efficiency of charge transfer through interfaces, which is the basis for effective solar-to-chemical energy conversion.

In Situ Formation of CoP/Co3 O4 Heterojunction for Efficient Overall Water Splitting

Electrochemical water splitting is an environmentally friendly and effective energy storage method. However, it is still a huge challenge to prepare non-noble metal based electrocatalysts that possess high activity and long-term durability to realize efficient water splitting. Here, we present a novel method of low-temperature phosphating for preparing CoP/Co3 O4 heterojunction nanowires catalyst on titanium mesh (TM) substrate that can be used for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting. CoP/Co3 O4 @TM heterojunction showed an excellent catalytic performance and long-term durability in 1.0 M KOH electrolyte. The overpotential of CoP/Co3 O4 @TM heterojunction was only 257 mV at 20 mA cm-2 during the OER process, and it could work stably more than 40 h at 1.52 V versus reversible hydrogen electrode (vs. RHE). During the HER process, the overpotential of CoP/Co3 O4 @TM heterojunction was only 98 mV at -10 mA cm-2 . More importantly, when used as anodic and cathodic electrocatalyst, they achieved 10 mA cm-2 at 1.59 V. The Faradaic efficiencies of OER and HER were 98.4 % and 99.4 %, respectively, outperforming Ru/Ir-based noble metal electrocatalysts and other non-noble metal electrocatalysts for overall water splitting.

In Situ Filling of the Oxygen Vacancies with Dual Heteroatoms in Co3O4 for Efficient Overall Water Splitting

Electrocatalytic water splitting is a crucial area in sustainable energy development, and the development of highly efficient bifunctional catalysts that exhibit activity toward both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is of paramount importance. Co₃O₄ is a promising candidate catalyst, owing to the variable valence of Co, which can be exploited to enhance the bifunctional catalytic activity of HER and OER through rational adjustments of the electronic structure of Co atoms. In this study, we employed a plasma-etching strategy in combination with an in situ filling of heteroatoms to etch the surface of Co₃O₄, creating abundant oxygen vacancies, while simultaneously filling them with nitrogen and sulfur heteroatoms. The resulting N/S-V_O-Co₃O₄ exhibited favorable bifunctional activity for alkaline electrocatalytic water splitting, with significantly enhanced HER and OER catalytic activity compared to pristine Co₃O₄. In an alkaline overall water-splitting simulated electrolytic cell, N/S-V_O-Co₃O₄ || N/S-V_O-Co₃O₄ showed excellent overall water splitting catalytic activity, comparable to noble metal benchmark catalysts Pt/C || IrO₂, and demonstrated superior long-term catalytic stability. Additionally, the combination of in situ Raman spectroscopy with other ex situ characterizations provided further insight into the reasons behind the enhanced catalyst performance achieved through the in situ incorporation of N and S heteroatoms. This study presents a facile strategy for fabricating highly efficient cobalt-based spinel electrocatalysts incorporated with double heteroatoms for alkaline electrocatalytic monolithic water splitting.

Time-Resolved Vibrational and Electronic Spectroscopy for Understanding How Charges Drive Metal Oxide Catalysts for Water Oxidation

Temporally resolved spectroscopy is a powerful approach for gaining detailed mechanistic understanding of water oxidation at robust Earth-abundant metal oxide catalysts for guiding efficiency improvement of solar fuel conversion systems. Beyond detecting and structurally identifying surface intermediates by vibrational and accompanying optical spectroscopy, knowledge of how charges, sequentially delivered to the metal oxide surface, drive the four-electron water oxidation cycle is critical for enhancing catalytic efficiency. Key issues addressed in this Perspective are the experimental requirements for establishing the kinetic relevancy of observed surface species and the discovery of the rate-boosting role of encounters of two or more one-electron surface hole charges, often in the form of randomly hopping metal oxo or oxyl moieties, for accessing very low-barrier O-O bond-forming pathways. Recent spectroscopic breakthroughs of metal oxide photo- and electrocatalysts inspire future research poised to take advantage of new highly sensitive spectroscopic tools and of methods for fast catalysis triggering.

CeO2 decorated bimetallic phosphide nanowire arrays for enhanced oxygen evolution reaction electrocatalysis via interface engineering

To realize electrocatalytic water splitting for hydrogen production, the development of efficient and durable anode materials containing earth-abundant elements is of great significance. In this work, we demonstrate a novel heterostructure with easily depositing CeO₂ nanoparticles on the surface of the metal-organic framework (MOF)-derived Co_0.4Ni_1.6P nanowire arrays. Such an interface engineering strategy triggers the formation of abundant oxygen vacancies and provides more electrocatalytically active sites. Besides, the synergistic effect in this composite can regulate the electronic structure, and lead to an enhanced charge-transfer ability. Benefiting from the above superiorities, this heterostructure exhibits remarkable electrocatalytic performance towards the oxygen evolution reaction (OER) in 1 M KOH electrolyte, requiring overpotentials (η) of 268 and 343 mV to yield current densities of 10 and 100 mA cm^-2, respectively, accompanied by a low Tafel slope of 79.3 mV dec^-1. Furthermore, the electrocatalytic performance of this heterostructure for the OER in simulated alkaline seawater (1 M KOH + 0.5 M NaCl) was also studied, and it achieved low η values of 345 and 394 mV to drive 100 and 200 mA cm^-2, respectively. This work presents a simple approach to fabricate heterostructural electrocatalysts with CeO₂ nanoparticles for high-performance water/seawater electrolysis.

In Situ/Operando Insights into the Stability and Degradation Mechanisms of Heterogeneous Electrocatalysts

The further commercialization of renewable energy conversion and storage technologies requires heterogeneous electrocatalysts that meet the exacting durability target. Studies of the stability and degradation mechanisms of electrocatalysts are expected to provide important breakthroughs in stability issues. Accessible in situ/operando techniques performed under realistic reaction conditions are therefore urgently needed to reveal the nature of active center structures and establish links between the structural motifs in a catalyst and its stability properties. This review highlights recent research advances regarding in situ/operando techniques and improves the understanding of the stabilities of advanced heterogeneous electrocatalysts used in a diverse range of electrochemical reactions; it also proposes some degradation mechanisms. The review concludes by offering suggestions for future research.

Achieving ultra-dispersed 1T-Co-MoS2@HMCS via space-confined engineering for highly efficient hydrogen evolution in the universal pH range

A multi-level spatial confinement strategy is proposed for the fabrication of ultra-dispersed 1T-Co-MoS2 nanoclusters, which exhibit remarkable electrocatalytic activity and durability for HER.

Accelerating hydrazine-assisted hydrogen production kinetics with Mn dopant modulated CoS2 nanowire arrays

The designed Mn-modified CoS2 catalyst exhibits outstanding bifunctional electrocatalytic performances toward hydrogen evolution reaction and hydrazine oxidation reaction for high-efficiency energy-saving H2 production by water-assisted electrolysis.

Soluble Complexes of Cobalt Oxide Fragments Bring the Unique CO2 Photoreduction Activity of a Bulk Material into the Flexible Domain of Molecular Science

The deposition of metal oxides is essential to the fabrication of numerous multicomponent solid-state devices and catalysts. However, the reproducible formation of homogeneous metal oxide films or of nanoparticle dispersions at solid interfaces remains an ongoing challenge. Here we report that molecular hexaniobate cluster anion complexes of structurally and electronically distinct fragments of cubic-spinel and monoclinic Co₃O₄ can serve as tractable yet well-defined functional analogues of bulk cobalt oxide. Notably, the energies of the highest-occupied and lowest-unoccupied molecular orbitals (HOMO and LUMO) of the molecular complexes, 1, closely match the valence- and conduction-band (VB and CB) energies of the parent bulk oxides. Use of 1 as a molecular analogue of the parent oxides is demonstrated by its remarkably simple deployment as a cocatalyst for direct Z-scheme reduction of CO₂ by solar light and water. Namely, evaporation of an aqueous solution of 1 on TiO₂-coated fluorinated tin oxide windows (TiO₂/FTO), immersion in wet acetonitrile, and irradiation by simulated solar light under an atmosphere of CO₂ give H₂, CO, and CH₄ in ratios nearly identical to those obtained using 20 nm spinel-Co₃O₄ nanocrystals, but 15 times more rapidly on a Co basis and more rapidly overall than other reported systems. Detailed investigation of the photocatalytic properties of 1 on TiO₂/FTO includes confirmation of a direct Z-scheme charge-carrier migration pathway by in situ irradiated X-ray photoelectron spectroscopy. More generally, the findings point to a potentially important new role for coordination chemistry that bridges the conceptual divide between molecular and solid-state science.

A self-healing catalyst for electrocatalytic and photoelectrochemical oxygen evolution in highly alkaline conditions

While self-healing is considered a promising strategy to achieve long-term stability for oxygen evolution reaction (OER) catalysts, this strategy remains a challenge for OER catalysts working in highly alkaline conditions. The self-healing of the OER-active nickel iron layered double hydroxides (NiFe-LDH) has not been successful due to irreversible leaching of Fe catalytic centers. Here, we investigate the introduction of cobalt (Co) into the NiFe-LDH as a promoter for in situ Fe redeposition. An active borate-intercalated NiCoFe-LDH catalyst is synthesized using electrodeposition and shows no degradation after OER tests at 10 mA cm⁻² at pH 14 for 1000 h, demonstrating its self-healing ability under harsh OER conditions. Importantly, the presence of both ferrous ions and borate ions in the electrolyte is found to be crucial to the catalyst’s self-healing. Furthermore, the implementation of this catalyst in photoelectrochemical devices is demonstrated with an integrated silicon photoanode. The self-healing mechanism leads to a self-limiting catalyst thickness, which is ideal for integration with photoelectrodes since redeposition is not accompanied by increased parasitic light absorption.

While self-healing catalysts may survive the harsh environments used for oxygen evolution, understanding how to develop such electrocatalysts remains a challenge. Here, authors find cobalt to promote the self-healing of leached iron centers in borate-intercalated nickel-iron-cobalt oxyhydroxides.

Unassisted Photoelectrochemical Cell with Multimediator Modulation for Solar Water Splitting Exceeding 4% Solar-to-Hydrogen Efficiency

Photoelectrochemical overall water splitting has been considered as a promising approach for producing chemical energy from solar energy. Although many photoelectrochemical cells have been developed for overall water splitting by coupling two semiconductor photoelectrodes, inefficient charge transfer between the light-harvesters and electron acceptor/donor severely restricts the solar energy conversion efficiency. Inspired by natural photosynthesis, we assembled a photoelectrochemical platform with multimediator modulation to achieve unassisted overall water splitting. Photogenerated electrons are transferred in order through multimediators driven by the electrochemical potential gradient, resulting in efficient charge separation and transportation with enhanced charge transfer rate and reduced charge recombination rate. The integrated system composed of inorganic oxide-based photoanode (BiVO₄) and organic polymer-based photocathode (PBDB-T:ITIC:PC₇₁BM) with complementary light absorption, exhibits a solar-to-hydrogen conversion efficiency as high as 4.3%. This work makes a rational design possible by constructing an efficient charge-transfer chain in artificial photosynthesis systems for solar fuel production.

Development of a photoelectrochemically self-improving Si/GaN photocathode for efficient and durable H2 production

Development of an efficient yet durable photoelectrode is of paramount importance for deployment of solar-fuel production. Here, we report the photoelectrochemically self-improving behaviour of a silicon/gallium nitride photocathode active for hydrogen production with a Faradaic efficiency approaching ~100%. By using a correlative approach based on different spectroscopic and microscopic techniques, as well as density functional theory calculations, we provide a mechanistic understanding of the chemical transformation that is the origin of the self-improving behaviour. A thin layer of gallium oxynitride forms on the side walls of the gallium nitride grains, via a partial oxygen substitution at nitrogen sites, and displays a higher density of catalytic sites for the hydrogen-evolving reaction. This work demonstrates that the chemical transformation of gallium nitride into gallium oxynitride leads to sustained operation and enhanced catalytic activity, thus showing promise for oxynitride layers as protective catalytic coatings for hydrogen evolution.

4f-π Molecular Hybrid Exhibiting Rich Conductive Phases and Slow Relaxation of Magnetization

Cooperation between single-molecule magnets and electrical conductivity holds promise for preparing high-density magnetic devices; however, there are only a few reports so far. Here we report a 4f-π-based molecular hybrid, k-(ET)₅Dy(NCS)₇(KCl)_0.5 (1) (ET = bis(ethylenedithio)tetrathiafulvalene, NCS^- = thiocyanate), which undergoes slow relaxation of the magnetization and electrical conductivity. Unlike common ET-based conductive salts, K⁺ ions were intercalated into ET layers and coordinated with ET radicals. We found that the ET charges were sensitive to temperature, resulting in rich conductive phases at 75-300 K. In particular, the upturn in conductivity with a clear hysteresis loop was explained by the formation of partially oxidized states with charges close to 0.5+, which accounts for a metallic state. From the results of electronic structure calculations, the hole concentration increased to 125 K, which is consistent with a partially oxidized state upon cooling. The weak antiferromagnetic interactions accompanied by a dual magnetic relaxation process below 4 K are closely associated with the weak 4f-π interactions.

One-Step Construction of Multi-Walled CNTs Loaded with Alpha-Fe2O3 Nanoparticles for Efficient Photocatalytic Properties

The aggregation and the rapid restructuring of the photoinduced electron−hole pairs restructuring in the process of photoelectric response remains a great challenge. In this study, a kind of Multi-walled carbon nanotubes loaded Alpha-Fe₂O₃ (CNTs/α-Fe₂O₃) heterostructure composite is successfully prepared via the one-step method. Due to the synergistic effect in the as-prepared CNTs/α-Fe₂O₃, the defect sites and oxygen-containing functional groups of CNTs can dramatically improve the interface charge separation efficiency and prevent the aggregation of α-Fe₂O₃. The improved photocurrent and enhanced hole–electron separation rate in the CNTs/α-Fe₂O₃ is obtained, and the narrower band gap is measured to be 2.8 ev with intensive visible-light absorption performance. Thus, the CNTs/α-Fe₂O₃ composite serves as an excellent visible light photocatalyst and exhibits an outstanding photocatalytic activity for the cationic dye degradation of rhodamine B (RhB). This research supplies a fresh application area forα-Fe₂O₃ photocatalyst and initiates a new approach for design of high efficiency photocatalytic materials.

Surface and Interface Engineering: Molybdenum Carbide-Based Nanomaterials for Electrochemical Energy Conversion

Molybdenum carbide (Mo_x C)-based nanomaterials have shown competitive performances for energy conversion applications based on their unique physicochemical properties. A large surface area and proper surface atomic configuration are essential to explore potentiality of Mo_x C in electrochemical applications. Although considerable efforts are made on the development of advanced Mo_x C-based catalysts for energy conversion with high efficiency and stability, some urgent issues, such as low electronic conductivity, low catalytic efficiency, and structural instability, have to be resolved in accordance with their application environments. Surface and interface engineering have shown bright prospects to construct highly efficient Mo_x C-based electrocatalysts for energy conversion including the hydrogen evolution reaction, oxygen evolution reaction, nitrogen reduction reaction, and carbon dioxide reduction reaction. In this Review, the recent progresses in terms of surface and interface engineering of Mo_x C-based electrocatalytic materials are summarized, including the increased number of active sites by decreasing the particle size or introducing porous or hierarchical structures and surface modification by introducing heteroatom(s), defects, carbon materials, and others electronic conductive species. Finally, the challenges and prospects for energy conversion on Mo_x C-based nanomaterials are discussed in terms of key performance parameters for the catalytic performance.

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this review, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

Electrochemically Generated Nanobubbles: Invariance of the Current with Respect to Electrode Size and Potential

Gas-producing electrochemical reactions are key to energy conversion and generation technologies. Bubble formation dramatically decreases gas-production rates on nanoelectrodes, by confining the reaction to the electrode boundary. This results in the collapse of the current to a stationary value independent of the potential. Startlingly, these residual currents also appear to be insensitive to the nanoelectrode diameter in the 5 to 500 nm range. These results are counterintuitive, as it may be expected that the current be proportional to the circumference of the electrode, i.e., the length of the three-phase line where the reaction occurs. Here, we use molecular simulations and a kinetic model to elucidate the origin of current insensitivity with respect to the potential and establish its relationship to the size of nanoelectrodes. We provide critical insights for the design and operation of nanoscale electrochemical devices and demonstrate that nanoelectrode arrays maximize conversion rates compared to macroscopic electrodes with same total area.

Highly stable all-in-one photoelectrochemical electrodes based on carbon nanowalls

Photoelectrochemical (PEC) cells offer a promising approach for developing low-cost solar energy conversion systems. However, the lack of stable and cost-effective electrodes remains a bottleneck that hampers their practical applications. Here, we propose a kind of integrated all-in-one three-dimensional (3D) carbon nanowall (CNW) electrode without sensitized semiconductors for stable all-carbon PEC cells. The all-in-one CNW electrodes were fabricated by directly growing CNW on both sides of the SiO₂/Si/SiO₂ wafer employing the radio frequency plasmon enhanced chemical vapor deposition method. Benefitting from the interconnected 3D textured structure, the CNW can effectively absorb the incident light and provide a large electrochemical reaction interface at the CNW surface that promotes the separation of photogenerated charge carriers, which makes it a superior electrode material. Experimental results show that the all-in-one CNW electrodes possess excellent PEC performance with a photocurrent density of 830 μA cm^-2. Moreover, the CNW electrodes exhibit excellent photoresponses over a wide waveband and superior stability with a maintained photocurrent response, even after 60 d, which outperforms the electrodes using the other two-dimensional layered materials or semiconductor sensitized electrodes. Such an all-in-one electrode with impressive photovoltaic properties provides a promising platform for PEC applications that is eco-friendly with high efficiency, excellent stability and low cost.

Spontaneous solar water splitting with decoupling of light absorption and electrocatalysis using silicon back-buried junction

Converting sunlight into a storable form of energy by spontaneous water splitting is of great interest but the difficulty in simultaneous management of optical, electrical, and catalytic properties has limited the efficiency of photoelectrochemical (PEC) devices. Herein, we implemented a decoupling scheme of light harvesting and electrocatalysis by employing a back-buried junction (BBJ) PEC cell design, which enables >95% front side light-harvesting, whereas the electrochemical reaction in conjunction with carrier separation/transport/collection occurs on the back side of the PEC cell. The resultant silicon BBJ-PEC half-cell produces a current density of 40.51 mA cm⁻² for hydrogen evolution by minimizing optical, electrical, and catalytic losses (as low as 6.11, 1.76, and 1.67 mA cm⁻², respectively). Monolithic fabrication also enables three BBJ-PEC cells to be connected in series as a single module, enabling unassisted solar water-splitting with a solar-to-hydrogen conversion efficiency of 15.62% and a hydrogen generation rate of 240 μg cm⁻² h⁻¹.

The simultaneous management of optical, electrical, and catalytic properties is challenging for photoelectrochemical devices. Here, authors design Si back-buried junction photoelectrodes that can be series connected for unassisted water-splitting with a high solar-to-hydrogen efficiency of 15.62%.

Gradient phosphorus-doping engineering and superficial amorphous reconstruction in NiFe2O4 nanoarrays to enhance the oxygen evolution electrocatalysis

A better solid-liquid-gas three-phase boundary is vital for low energy cost oxygen evolution reaction (OER), making the designed regulation of interfacial atmosphere necessary. Herein, we find that the OER electrocatalysis can be dramatically improved by synergistically forming disordered electronic structures and superficial amorphous layers, as superficial oxyhydroxide, phosphorus-doped NiFe2O4 nanoarrays on nitrogen-doped carbon nanofibers (OP-NiFe2O4/NCNFs). Unveiled by the depth-profiling analysis from the X-ray photoelectron spectroscopy, the contents of phosphorous doping in the OP-NiFe2O4 nanoarrays change dynamically from outside to inside due to its in situ superficial reconstruction into the oxyhydroxide layer, thereby accelerating electron transfer between heterogeneous phases. As revealed by density functional theory calculations, this amorphous oxyhydroxide layer and dynamically varied phosphorous content would positively shift the d-band center of the NiFe2O4-related compounds, leading to lower adsorption energy towards water molecule. Thus, the OP-NiFe2O4/NCNF electrocatalyst displays a low overpotential of 260 mV at a current density of 10 mA cm-2 and a small Tafel slope of 44.8 mV dec-1 in an alkaline medium.

Bipolar Energetics and Bifunctional Catalytic Activity of a Nanocrystalline Ru Thin-Film Enable High-Performance Photoelectrochemical Water Reduction and Oxidation

Photoelectrochemical (PEC) cells, which represent a promising technology for the production of hydrogen fuel through water splitting reactions, must meet two criteria to achieve high-performance operation: (i) a high thermodynamic open-circuit potential and (ii) a low kinetic overpotential. Herein, we achieved these criteria in both an oxygen-evolving n-Si photoanode and hydrogen-evolving p-Si photocathode by simple electrodeposition of a nanocrystalline thin film of Ru. The bifunctional electrocatalytic activity of the nanocrystalline Ru led to low overpotentials in both the acidic oxygen evolution reaction (0.27 V) and alkaline hydrogen evolution reaction (0.04 V). In addition, the nanocrystalline Ru/Si junctions influenced the interface energetics via the induction of an extrinsic electrochemical potential on the surface of the Ru nanocrystals through a redox reaction rather than the chemical potential of the electrons (work function) of bulk Ru. The nanocrystalline Ru film exhibited bipolar applicability, enabling both Ru/n-Si and Ru/p-Si junctions with high V_oc values of 0.63 and 0.5 V, respectively. As a result, the n-Si photoanode in the acidic electrolyte and the p-Si photocathode in the alkaline electrolyte generated a photocurrent of 10 mA/cm² at record values of 0.87 and 0.42 V versus the reversible hydrogen electrode, respectively. These results provide insight into the development of high-performance PEC cells based on a nanocrystalline electrocatalyst.

Strategies for Semiconductor/Electrocatalyst Coupling toward Solar-Driven Water Splitting

Hydrogen (H2) has a significant potential to enable the global energy transition from the current fossil-dominant system to a clean, sustainable, and low-carbon energy system. While presently global H2 production is predominated by fossil-fuel feedstocks, for future widespread utilization it is of paramount importance to produce H2 in a decarbonized manner. To this end, photoelectrochemical (PEC) water splitting has been proposed to be a highly desirable approach with minimal negative impact on the environment. Both semiconductor light-absorbers and hydrogen/oxygen evolution reaction (HER/OER) catalysts are essential components of an efficient PEC cell. It is well documented that loading electrocatalysts on semiconductor photoelectrodes plays significant roles in accelerating the HER/OER kinetics, suppressing surface recombination, reducing overpotentials needed to accomplish HER/OER, and extending the operational lifetime of semiconductors. Herein, how electrocatalyst coupling influences the PEC performance of semiconductor photoelectrodes is outlined. The focus is then placed on the major strategies developed so far for semiconductor/electrocatalyst coupling, including a variety of dry processes and wet chemical approaches. This Review provides a comprehensive account of advanced methodologies adopted for semiconductor/electrocatalyst coupling and can serve as a guideline for the design of efficient and stable semiconductor photoelectrodes for use in water splitting.

Remarkably improved oxygen evolution reaction activity of cobalt oxides by an Fe ion solution immersion process

Fe ion-treated cobalt oxides were synthesized for the oxygen evolution reaction. Both theory and experiment confirm that the catalytic activity of cobalt oxides was significantly enhanced by Fe ions.

Direct observation of chemical origins in crystalline (NixCo1−x)2B oxygen evolution electrocatalysts

A crystalline bimetal (Ni_0.75Co_0.25)₂B catalyst synthesized by a simple ball-milling method exhibits excellent OER activity, and the special roles of Co and Ni were accurately certified by CV cycling on hydrophobic and hydrophilic electrodes.

A high-performance bimetallic cobalt iron oxide catalyst for the oxygen evolution reaction

Herein, a facile solvothermal approach was designed to produce the CoFe₂O₄ nanospheres with unique porous structure. As an efficient electrocatalyst for OER, the CoFe₂O₄ nanospheres performed high performance.

A semiconductor junction photoelectrochemical device without a depletion region

Semiconductor junctions are believed to form a depletion region at the band edge of the semiconductor as the chemical potentials for electrons (work functions) are aligned to the same level. Here, we demonstrated that ultrathin Ni film (less than 4 nm thick)/Si junction-based photoelectrochemical (PEC) devices have no depletion region due to three distinct phenomena: (i) the electrostatic or electrochemical potential extrinsically charged to the electrolytic-capacitive Ni surface dominates rather than the chemical potential of electrons (work function) of the bulk Ni, (ii) the charged potential is dynamically variable depending on the reaction and is rapidly volatile so as not to be constant; therefore, (iii) the charged potential is misaligned with the chemical potential of Si under equivalent circuit conditions. Such junction PEC devices were shown to follow a novel operating principle in which the output voltage (open circuit potential) is generated by the electrochemical potential charged at the Ni surface, and not by the light-induced potential (photovoltage) in Si. In addition, due to the bipolar charging nature, the ultrathin Ni film was effective in achieving a high open circuit potential in both p-Si photocathodes (0.57 V) and n-Si photoanodes (0.45 V). These anomalous results were not explained by the classical Schottky diode model based on the equilibrium of diffusion-drift current but by establishing a new model based on the equilibrium of the diffusion-charging current without accounting for the depletion region. Our findings provide an explanation for the unexpected results of the nanostructured PEC devices and insight into a new design that can overcome conventional limitations.

5.1% efficiency of Si photoanodes for photoelectrochemical water splitting catalyzed by porous NiFe (oxy)hydroxide converted from NiFe oxysulfide

A porous NiFe (oxy)hydroxide catalyst fabricated on n+pp+-Si/Ni/NiOx, which is converted from an electrodeposited NiFe oxysulfide, allows a silicon photoanode for water splitting to hit a record 5.1% efficiency with good stability of up to 135 h under 40 mA cm-2 in 1.0 M NaOH.

Bifunctional earth-abundant phosphate/phosphide catalysts prepared via atomic layer deposition for electrocatalytic water splitting

The development of active and stable earth-abundant catalysts for hydrogen and oxygen evolution is one of the requirements for successful production of solar fuels. Atomic Layer Deposition (ALD) is a proven technique for conformal coating of structured (photo)electrode surfaces with such electrocatalyst materials. Here, we show that ALD can be used for the deposition of iron and cobalt phosphate electrocatalysts. A PE-ALD process was developed to obtain cobalt phosphate films without the need for a phosphidation step. The cobalt phosphate material acts as a bifunctional catalyst, able to also perform hydrogen evolution after either a thermal or electrochemical reduction step.