Protein drug stability: a formulation challenge

Simultaneous Protein Adsorption and Viscosity Measurement using Micropillar-Enhanced Acoustic Wave (μPAW) Device for Pharmaceutical Applications

At the early stages of drug development, the amount of drug materials is rather limited. In this case, viscosity measurement is often postponed to the later stages, where grams of proteins can be produced. Therefore, it is necessary to develop a viscometer capable of measuring the viscosity with high accuracy while requiring low sample volume. This study presents a novel viscosity measurement technique based on measuring the resonance frequency and motional resistance of a micropillar-enhanced acoustic wave (μPAW) device. The μPAW was developed by fabricating micropillars on the quartz crystal microbalance substrate in order to achieve ultra-high sensitivity, thanks to a unique coupling between the micropillar and the resonator. The experimental measurements demonstrated a nonlinear relationship between the density and viscosity of the fluid and the response of μPAW. A calibration correlation was developed using the response of μPAW in aqueous glycerol and sucrose solutions. The measurements were then extended using high-concentration BSA solutions as the model of protein solution. The main advantage of the μPAW device in this work over other viscometers is the ability to simultaneously measure solution viscosity and protein adsorption on the surface. This is a huge step forward in the development of sensing systems for the pharmaceutical industry, where real-time sensing of target biological proteins and measuring the viscosity of a solution is required.

Unraveling mechanisms of protein encapsulation and release in coacervates via molecular dynamics and machine learning

Coacervates play a pivotal role in protein-based drug delivery research, yet their drug encapsulation and release mechanisms remain poorly understood. Here, we utilized the Martini model to investigate bovine serum albumin (BSA) protein encapsulation and release within polylysine/polyglutamate (PLys/PGlu) coacervates. Our findings emphasize the importance of ingredient addition sequence in coacervate formation and encapsulation rates, attributed to preference contact between oppositely charged proteins and poly(amino acid)s. Notably, coacervates composed of β-sheet poly(amino acid)s demonstrate greater BSA encapsulation efficiency due to their reduced entropy and flexibility. Furthermore, we examined the pH responsiveness of coacervates, shedding light on the dissolution process driven by Coulomb forces. By leveraging machine learning algorithms to analyze simulation results, our research advances the understanding of coacervate-based drug delivery systems, with the ultimate goal of optimizing therapeutic outcomes.

Improving the stability of insulin through effective chemical modifications: A Comprehensive review

Insulin, an essential peptide hormone, conjointly regulates blood glucose levels by its receptor and it is used as vital drug to treat diabetes. This therapeutic hormone may undergo different chemical modifications during industrial processes, pharmaceutical formulation, and through its endogenous storage in the pancreatic β-cells. Insulin is highly sensitive to environmental stresses and readily undergoes structural changes, being also able to unfold and aggregate in physiological conditions. Even; small changes altering the structural integrity of insulin may have significant impacts on its biological efficacy to its physiological and pharmacological activities. Insulin analogs have been engineered to achieve modified properties, such as improved stability, solubility, and pharmacokinetics, while preserving the molecular pharmacology of insulin. The casually or purposively strategies of chemical modifications of insulin occurred to improve its therapeutic and pharmaceutical properties. Knowing the effects of chemical modification, formation of aggregates, and nanoparticles on protein can be a new look at the production of protein analogues drugs and its application in living system. The project focused on effects of chemical modifications and nanoparticles on the structure, stability, aggregation and their results in effective drug delivery system, biological activity, and pharmacological properties of insulin. The future challenge in biotechnology and pharmacokinetic arises from the complexity of biopharmaceuticals, which are often molecular structures that require formulation and delivery strategies to ensure their efficacy and safety.

Revolutionizing cancer therapy using tetrahedral DNA nanostructures as intelligent drug delivery systems

DNA nanostructures have surfaced as intriguing entities with vast potential in biomedicine, notably in the drug delivery area. Tetrahedral DNA nanostructures (TDNs) have received worldwide attention from among an array of different DNA nanostructures due to their extraordinary stability, great biocompatibility, and ease of functionalization. TDNs could be readily synthesized, making them attractive carriers for chemotherapeutic medicines, nucleic acid therapeutics, and imaging probes. Their varied uses encompass medication delivery, molecular diagnostics, biological imaging, and theranostics. This review extensively highlights the mechanisms of functional modification of TDNs and their applications in cancer therapy. Additionally, it discusses critical concerns and unanswered problems that require attention to increase the future application of TDNs in developing cancer treatment.

Protecting Lyophilized Escherichia coli Adenylate Kinase

Drying protein-based drugs, usually via lyophilization, can facilitate storage at ambient temperature and improve accessibility but many proteins cannot withstand drying and must be formulated with protective additives called excipients. However, mechanisms of protection are poorly understood, precluding rational formulation design. To better understand dry proteins and their protection, we examine Escherichia coli adenylate kinase (AdK) lyophilized alone and with the additives trehalose, maltose, bovine serum albumin, cytosolic abundant heat soluble protein D, histidine, and arginine. We apply liquid-observed vapor exchange NMR to interrogate the residue-level structure in the presence and absence of additives. We pair these observations with differential scanning calorimetry data of lyophilized samples and AdK activity assays with and without heating. We show that the amino acids do not preserve the native structure as well as sugars or proteins and that after heating the most stable additives protect activity best.

Stability of Protein Pharmaceuticals: Recent Advances

There have been significant advances in the formulation and stabilization of proteins in the liquid state over the past years since our previous review. Our mechanistic understanding of protein-excipient interactions has increased, allowing one to develop formulations in a more rational fashion. The field has moved towards more complex and challenging formulations, such as high concentration formulations to allow for subcutaneous administration and co-formulation. While much of the published work has focused on mAbs, the principles appear to apply to any therapeutic protein, although mAbs clearly have some distinctive features. In this review, we first discuss chemical degradation reactions. This is followed by a section on physical instability issues. Then, more specific topics are addressed: instability induced by interactions with interfaces, predictive methods for physical stability and interplay between chemical and physical instability. The final parts are devoted to discussions how all the above impacts (co-)formulation strategies, in particular for high protein concentration solutions.'

Atomic resolution structure of full-length human insulin fibrils

Patients with type 1 diabetes mellitus who are dependent on an external supply of insulin develop insulin-derived amyloidosis at the sites of insulin injection. A major component of these plaques is identified as full-length insulin consisting of the two chains A and B. While there have been several reports that characterize insulin misfolding and the biophysical properties of the fibrils, atomic-level information on the insulin fibril architecture remains elusive. We present here an atomic resolution structure of a monomorphic insulin amyloid fibril that has been determined using magic angle spinning solid-state NMR spectroscopy. The structure of the insulin monomer yields a U-shaped fold in which the two chains A and B are arranged in parallel to each other and are oriented perpendicular to the fibril axis. Each chain contains two β-strands. We identify two hydrophobic clusters that together with the three preserved disulfide bridges define the amyloid core structure. The surface of the monomeric amyloid unit cell is hydrophobic implicating a potential dimerization and oligomerization interface for the assembly of several protofilaments in the mature fibril. The structure provides a starting point for the development of drugs that bind to the fibril surface and disrupt secondary nucleation as well as for other therapeutic approaches to attenuate insulin aggregation.

Evodiamine and its nano-based approaches for enhanced cancer therapy: recent advances and challenges

Evodiamine is a bioactive alkaloid extracted from the Evodia rutaecarpa plant. It has various pharmacological effects including anti-cancer, anti-bacterial, anti-obesity, anti-neurodegenerative, anti-depressant, and cardiac protective properties. Evodiamine demonstrates potent anti-cancer activity by inhibiting the proliferation of cancer cells in vitro and in vivo. Despite the health-promoting properties of evodiamine, its clinical use is hindered by low water solubility, poor bioavailability, and toxicity. Thus, there is a need to develop alternative drug delivery systems for evodiamine to enhance its solubility, permeability, and stability, as well as to facilitate targeted, prolonged, and controlled drug release. Nanocarriers can increase the therapeutic potential of evodiamine in cancer therapy while reducing adverse side effects. To date, numerous attempts have been made through the development of smart nanocarriers to overcome the drawbacks of evodiamine. This review focuses on the pharmacological applications, anti-cancer mechanisms, and limitations of evodiamine. Various nanocarriers, including lipid-based nanoparticles, polymeric nanoparticles, cyclodextrins, and so forth, have been discussed extensively for evodiamine delivery. Nano-drug delivery systems could increase the solubility, bioavailability, stability, and therapeutic efficacy of evodiamine. This review aims to present a comprehensive and critical evaluation of several nano-formulations of evodiamine for cancer therapy. © 2024 Society of Chemical Industry.

Innovative Formulation Platform: Paving the Way for Superior Protein Therapeutics with Enhanced Efficacy and Broadened Applications

Protein therapeutics offer high therapeutic potency and specificity; the broader adoptions and development of protein therapeutics, however, have been constricted by their intrinsic limitations such as inadequate stability, immunogenicity, suboptimal pharmacokinetics and biodistribution, and off-target effects. This review describes a platform technology that formulates individual protein molecules with a thin formulation layer of crosslinked polymers, which confers the protein therapeutics with high activity, enhanced stability, controlled release capability, reduced immunogenicity, improved pharmacokinetics and biodistribution, and ability to cross the blood brain barriers. Based on currently approved protein therapeutics, this formulating platform affords the development of a vast family of superior protein therapeutics with improved efficacy and broadened indications at significantly reduced cost.

Develop Targeted Protein Drug Carriers through a High-Throughput Screening Platform and Rational Design

Protein-based drugs offer advantages, such as high specificity, low toxicity, and minimal side effects compared to small molecule drugs. However, delivery of proteins to target tissues or cells remains challenging due to the instability, diverse structures, charges, and molecular weights of proteins. Polymers have emerged as a leading choice for designing effective protein delivery systems, but identifying a suitable polymer for a given protein is complicated by the complexity of both proteins and polymers. To address this challenge, a fluorescence-based high-throughput screening platform called ProMatch to efficiently collect data on protein-polymer interactions, followed by in vivo and in vitro experiments with rational design is developed. Using this approach to streamline polymer selection for targeted protein delivery, candidate polymers from commercially available options are identified and a polyhexamethylene biguanide (PHMB)-based system for delivering proteins to white adipose tissue as a treatment for obesity is developed. A branched polyethylenimine (bPEI)-based system for neuron-specific protein delivery to stimulate optic nerve regeneration is also developed. The high-throughput screening methodology expedites identification of promising polymer candidates for tissue-specific protein delivery systems, thereby providing a platform to develop innovative protein-based therapeutics.

Design of a Reciprocal Injection Device for Stability Studies of Parenteral Biological Drug Products

Formulation screening, essential for assessing the impact of physical, chemical, and mechanical stresses on protein stability, plays a critical role in biologics drug product development. This research introduces a Reciprocal Injection Device (RID) designed to accelerate formulation screening by probing protein stability under intensified stress conditions within prefilled syringes. This versatile device is designed to accommodate a broad spectrum of injection parameters and diverse syringe dimensions. A commercial drug product was employed as a model monoclonal antibody formulation. Our findings effectively highlight the efficacy of the RID in assessing concentration-dependent protein stability. This device exhibits significant potential to amplify the influences of interfacial interactions, such as those with buffer salts, excipients, air, metals, and silicone oils, commonly found in combination drug products, and to evaluate the protein stability under varied stresses.

Experimental techniques for detecting and evaluating the amyloid fibrils

Amyloid fibrils are insoluble proteins with intricate β-sheet structures associated with various human diseases, including Parkinson's, Alzheimer's, and prion diseases. Proteins can form aggregates when their structure is misfolded, resulting in highly organized amyloid fibrils or amorphous aggregates. The formation of protein aggregates is a promising research field for mitigating diseases and the pharmaceutical and food industries. It is important to monitor and minimize the appearance of aggregates in these protein products. Several methods exist to assess protein aggregation, that includes from basic investigations to advanced biophysical techniques. Physicochemical parameters such as molecular weight, conformation, structure, and dimension are examined to study aggregation. There is an urgent need to develop methods for the detection of protein aggregation and amyloid fibril formation both in vitro and in vivo. This chapter focuses on a comprehensive discussion of the methods used to characterize and evaluate aggregates and amyloid fibrils.

Predicting the effects of mutations on protein solubility using graph convolution network and protein language model representation

Solubility is one of the most important properties of protein. Protein solubility can be greatly changed by single amino acid mutations and the reduced protein solubility could lead to diseases. Since experimental methods to determine solubility are time-consuming and expensive, in-silico methods have been developed to predict the protein solubility changes caused by mutations mostly through protein evolution information. However, these methods are slow since it takes long time to obtain evolution information through multiple sequence alignment. In addition, these methods are of low performance because they do not fully utilize protein 3D structures due to a lack of experimental structures for most proteins. Here, we proposed a sequence-based method DeepMutSol to predict solubility change from residual mutations based on the Graph Convolutional Neural Network (GCN), where the protein graph was initiated according to predicted protein structure from Alphafold2, and the nodes (residues) were represented by protein language embeddings. To circumvent the small data of solubility changes, we further pretrained the model over absolute protein solubility. DeepMutSol was shown to outperform state-of-the-art methods in benchmark tests. In addition, we applied the method to clinically relevant genes from the ClinVar database and the predicted solubility changes were shown able to separate pathogenic mutations. All of the data sets and the source code are available at https://github.com/biomed-AI/DeepMutSol.

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

Protective roles of highly conserved motif 1 in tardigrade cytosolic-abundant heat soluble protein in extreme environments

Tardigrades are remarkable microscopic animals that survive harsh conditions such as desiccation and extreme temperatures. Tardigrade-specific intrinsically disordered proteins (TDPs) play an essential role in the survival of tardigrades in extreme environments. Cytosolic-abundant heat soluble (CAHS) protein, a key TDP, is known to increase desiccation tolerance and to protect the activity of several enzymes under dehydrated conditions. However, the function and properties of each CAHS domain have not yet been elucidated in detail. Here, we aimed to elucidate the protective role of highly conserved motif 1 of CAHS in extreme environmental conditions. To examine CAHS domains, three protein constructs, CAHS Full (1-229), CAHS ∆Core (1-120_184-229), and CAHS Core (121-183), were engineered. The highly conserved CAHS motif 1 (124-142) in the CAHS Core formed an amphiphilic α helix, reducing the aggregate formation and protecting lactate dehydrogenase activity during dehydration-rehydration and freeze-thaw treatments, indicating that CAHS motif 1 in the CAHS Core was essential for maintaining protein solubility and stability. Aggregation assays and confocal microscopy revealed that the intrinsically disordered N- and C-terminal domains were more prone to aggregation under our experimental conditions. By explicating the functions of each domain in CAHS, our study proposes the possibility of using engineered proteins or peptides derived from CAHS as a potential candidate for biological applications in extreme environmental stress responses.

Lipid-Based Nanoparticles as Oral Drug Delivery Systems: Overcoming Poor Gastrointestinal Absorption and Enhancing Bioavailability of Peptide and Protein Therapeutics

Delivery and formulation of oral peptide and protein therapeutics have always been a challenge for the pharmaceutical industry. The oral bioavailability of peptide and protein therapeutics mainly relies on their gastrointestinal solubility and permeability which are affected by their poor membrane penetration, high molecular weight and proteolytic (chemical and enzymatic) degradation resulting in limited delivery and therapeutic efficacy. The present review article highlights the challenges and limitations of oral delivery of peptide and protein therapeutics focusing on the application, potential and importance of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) as lipid-based drug delivery systems (LBDDSs) and their advantages and drawbacks. LBDDSs, due to their lipid-based matrix can encapsulate both lipophilic and hydrophilic drugs, and by reducing the first-pass effect and avoiding proteolytic degradation offer improved drug stability, dissolution rate, absorption, bioavailability and controlled drug release. Furthermore, their small size, high surface area and surface modification increase their mucosal adhesion, tissue-targeted distribution, physiological function and half-life. Properties such as simple preparation, high-scale manufacturing, biodegradability, biocompatibility, prolonged half-life, lower toxicity, lower adverse effects, lipid-based structure, higher drug encapsulation rate and various drug release profile compared to other similar carrier systems makes LBDDSs a promising drug delivery system (DDS). Nevertheless, undesired physicochemical features of peptide and protein drug development and discovery such as plasma stability, membrane permeability and circulation half-life remain a serious challenge which should be addressed in future.

Ultrahigh Enzyme Loading Metal-Organic Frameworks for Deep Tissue Pancreatic Cancer Photoimmunotherapy

Protein drugs hold promise in treating multiple complex diseases, including cancer. The priority of protein drug application is precise delivery of substantial bioactive protein into tumor site. Metal-organic-framework (MOF) is widely considered as a promising carrier to encapsulate protein drug owing to the noncovalent interaction between carrier and protein. However, limited loading efficiency and potential toxicity of metal ion in MOF restrict its application in clinical research. Herein, a tumor targeted collagenase-encapsulating MOF via protein-metal ion-organic ligand coordination (PMOCol ) for refining deep tissue pancreatic cancer photoimmunotherapy is developed. By an expedient method in which the ratio of metal ion, histidine residues of protein and ligand is precisely controlled, PMOCol is constructed with ultrahigh encapsulation efficiency (80.3 wt%) and can release collagenase with high enzymatic activity for tumor extracellular matrix (ECM) regulation after reaching tumor microenvironment (TME). Moreover, PMOcol exhibits intensively poorer toxicity than the zeolitic imidazolate framework-8 biomineralized protein. After treatment, the pancreatic tumor with abundant ECM shows enhanced immunocyte infiltration owing to extracellular matrix degradation that improves suppressive TME. By integrating hyperthermia agent with strong near-infrared absorption (1064 nm), PMOCol can induce acute immunogenicity to host immunity activation and systemic immune memory production to prevent tumor development and recurrence.

Polymeric DNase-I nanozymes targeting neutrophil extracellular traps for the treatment of bowel inflammation

Inflammatory bowel disease (IBD), including Crohn's disease and ulcerative colitis, is a family of chronic disorders along the gastrointestinal tract. Because of its idiopathic nature, IBD does not have a fundamental cure; current available therapies for IBD are limited to prolonged doses of immunomodulatory agents. While these treatments may reduce inflammation, limited therapeutic efficacy, inconsistency across patients, and adverse side effects from aggressive medications remain as major drawbacks. Recently, excessive production and accumulation of neutrophil extracellular traps (NETs) also known as NETosis have been identified to exacerbate inflammatory responses and induce further tissue damage in IBD. Such discovery invited many researchers to investigate NETs as a potential therapeutic target. DNase-I is a natural agent that can effectively destroy NETs and, therefore, potentially reduce NETs-induced inflammations even without the use of aggressive drugs. However, low stability and rapid clearance of DNase-I remain as major limitations for further therapeutic applications. In this research, polymeric nanozymes were fabricated to increase the delivery and therapeutic efficacy of DNase-I. DNase-I was immobilized on the surface of polymeric nanoparticles to maintain its enzymatic properties while extending its activity in the colon. Delivery of DNase-I using this platform allowed enhanced stability and prolonged activity of DNase-I with minimal toxicity. When administered to animal models of IBD, DNase-I nanozymes successfully alleviated various pathophysiological symptoms of IBD. More importantly, DNase-I nanozyme administration successfully attenuated neutrophil infiltration and NETosis in the colon compared to free DNase-I or mesalamine.

L-4-thiazolylalanine (Protinol), a novel non-proteinogenic amino acid, demonstrates epidermal and dermal efficacy with clinically observable benefits

OBJECTIVE

Facial skin undergoes major structural and functional changes as a result of intrinsic and extrinsic factors. The goal of the current work is to demonstrate L-4-thiazolylalaine (L4, Protinol), a non-proteinogenic amino acid shown to stimulate the production of dermal proteins by fibroblasts, is an alternative efficacious topical ingredient for visible signs of ageing.

METHODS

In vitro studies using 3D human skin tissue models were performed to show changes in protein and gene expression of key dermal markers in samples treated with 0.3% L4 compared to vehicle control. In vivo evaluation of skin turnover was measured in volunteers after treatment with L4 compared to retinol. Skin biopsies (n = 30) were taken to investigate epidermal and dermal changes in cases treated with L4 and compared to retinol. Finally, a clinical evaluation (n = 28) was conducted to assess the efficacy of L4 over a base formulation using various ageing parameters within a population of women 46-66 years old with mild-to-moderate wrinkles.

RESULTS

In vitro studies on 3D tissues displayed significant changes in the dermal matrix via an increase in HA and pro-collagen I production and a decrease in the expression of inflammatory genes. In vivo biopsy studies demonstrated that L4 and retinol independently increased epidermal thickness and collagen remodelling significantly more compared with the base formula. Clinical evaluation showed firmer and smoother skin at day 28 post-treatment with L4 over the vehicle control without causing side effects such as redness or irritation.

CONCLUSION

L4 is a novel, multi-functional ingredient which offers a superior alternative to currently available technologies for improving epidermal and dermal parameters that change during ageing and photodamage.

Direct Observation of the Mutual Coupling Effect in the Protein-Water-Glycerol Mixture by Combining Neutron Scattering and Selective Deuteration

Numerous studies have discussed the impact of cosolvents on the structure, dynamics, and stability of proteins in aqueous solutions. However, the dynamics of cosolvents in the protein-water-cosolvent ternary system is largely unexplored in experiments due to technical difficulty. Consequently, a comprehensive understanding of the interplay among proteins, water, and cosolvents is still lacking. Here, we employed selective deuteration and neutron scattering techniques to characterize the individual motions of each component in the protein/water/glycerol (GLY) mixture across various temperatures. The consistent dynamic onset temperatures and the correlation between the MSD of the protein and the viscosity of solvents revealed the mutual coupling effects among the three components. Furthermore, our experimental and simulation results showed that the hydrogen bond relaxation energy barrier in the ternary system is ∼43 kJ/mol, whereas in the protein-water binary system it is merely ∼35 kJ/mol. Therefore, we suggest that GLY can enhance hydrogen bond interactions in the ternary system through the mutual coupling effect, thereby serving as one of the protective mechanisms of protein preservation by GLY.

Investigating the Impact of Network Functionalization on Protein Adsorption to Polymer Nanogels

This study explores the impact of network functionalization and chemical composition on the pH-responsive behavior of polymer nanogels and their adsorption of proteins. Using a thermodynamic theory informed by a molecular model, this work evaluates the interactions of three proteins with varying isoelectric points (insulin, myoglobin, and cytochrome c) and pH-responsive nanogels based on methacrylic acid or allylamine motifs. Three different functionalization strategies are considered, with pH-responsive segments distributed randomly, at the center, or on the surface of the polymer network. Our results show that the spatial distribution of functional units affects both the nanogels' mechanical response to pH changes and the level and localization of adsorbed proteins. The dependence of protein adsorption on the salt concentration is also investigated, with the conclusion that it is best to encapsulate proteins at low salt concentrations and aim for release at high salt concentrations. These results provide valuable information for the design of pH-responsive nanogels as vehicles for protein encapsulation, transport, and administration.

Predicting Long-Term Stability of an Oral Delivered Antibody Drug Product with Accelerated Stability Assessment Program Modeling

The oral delivery of protein therapeutics offers numerous advantages for patients but also presents significant challenges in terms of development. Currently, there is limited knowledge available regarding the stability and shelf life of orally delivered protein therapeutics. In this study, a comprehensive assessment of the stability of an orally delivered solid dosage variable domain of heavy-chain antibody (VHH antibody) drug product was conducted. Four stability related quality attributes that undergo change as a result of thermal and humidity stress were identified. Subsequently, these attributes were modeled using an accelerated stability approach facilitated by ASAPprime software. To the best of our knowledge, this is the first time that this approach has been reported for an antibody drug product. We observed overall good model quality and accurate predictions regarding the protein stability during storage. Notably, we discovered that protein aggregation, formed through a degradation pathway, requires additional adjustments to the modeling method. In summary, the ASAP approach demonstrated promising results in predicting the stability of this complex solid-state protein formulation. This study sheds light on the stability and shelf life of orally delivered protein therapeutics, addressing an important knowledge gap in the field.

Influence of water and trehalose on α- and β-relaxation of freeze-dried lysozyme formulations

Molecular mobility in form of alpha and beta relaxations is considered crucial for characterization of amorphous lyophilizates and reflected in the transition temperatures Tgα and Tgβ. Based on an overview of applied methods to study beta relaxations, Dynamic Mechanical analysis was used to measure Tgα and Tgβ in amorphous freeze-dried samples. Lysozyme and trehalose as well as their mixtures in varying ratios were investigated. Three different residual moisture levels, ranging from roughly 0.5-7 % (w/w), were prepared via equilibration of the freeze-dried samples. Known plasticising effects of water on Tgα were confirmed, also via differential scanning calorimetry. In addition and contrary to expectations, an influence of water on the Tgβ also was observed. On the other hand, an increasing amount of trehalose lowered Tgα but increased Tgβ showing that Tgα and Tgβ are not paired. The findings were interpreted with regard to their underlying molecular mechanisms and a correlation with the known influences of water and trehalose on stability. The results provide encouraging hints for future stability studies of freeze-dried protein formulations, which are urgently needed, not least for reasons of sustainability.

Stabilization effects of saccharides in protein formulations: A review of sucrose, trehalose, cyclodextrins and dextrans

Saccharides are a popular group of stabilizers in liquid, frozen and freeze dried protein formulations. The current work reviewed the stabilization mechanisms of three groups of saccharides: (i) Disaccharides, specifically sucrose and trehalose; (ii) cyclodextrins (CDs), a class of cyclic oligosaccharides; and (iii) dextrans, a class of polysaccharides. Compared to sucrose, trehalose exhibits a more pronounced preferential exclusion effect in liquid protein formulations, due to its stronger interaction with water molecules. However, trehalose obtains higher phase separation and crystallization propensity in frozen solutions, resulting in the loss of its stabilization function. In lyophilized formulations, sucrose has a higher crystallization propensity. Besides, its glass matrix is less homogeneous than that of trehalose, thus undermining its lyoprotectant function. Nevertheless, the hygroscopic nature of trehalose may result in high water absorption upon storage. Among all the CDs, the β form is believed to have stronger interactions with proteins than the α- and γ-CDs. However, the stabilization effect, brought about by CD-protein interactions, is case-by-case - in some examples, such interactions can promote protein destabilization. The stabilization effect of hydroxypropyl-β-cyclodextrin (HPβCD) has been extensively studied. Due to its amphiphilic nature, it can act as a surface-active agent in preventing interfacial stresses. Besides, it is a dual functional excipient in freeze dried formulations, acting as an amorphous bulking agent and lyoprotectant. Finally, dextrans, when combined with sucrose or trehalose, can be used to produce stable freeze dried protein formulations. A strong stabilization effect can be realized by low molecular weight dextrans. However, the terminal glucose in dextrans yields protein glycation, which warrants extra caution during formulation development.

Translating bacteriophage-derived depolymerases into antibacterial therapeutics: Challenges and prospects

Predatory bacteriophages have evolved a vast array of depolymerases for bacteria capture and deprotection. These depolymerases are enzymes responsible for degrading diverse bacterial surface carbohydrates. They are exploited as antibiofilm agents and antimicrobial adjuvants while rarely inducing bacterial resistance, making them an invaluable asset in the era of antibiotic resistance. Numerous depolymerases have been investigated preclinically, with evidence indicating that depolymerases with appropriate dose regimens can safely and effectively combat different multidrug-resistant pathogens in animal infection models. Additionally, some formulation approaches have been developed for improved stability and activity of depolymerases. However, depolymerase formulation is limited to liquid dosage form and remains in its infancy, posing a significant hurdle to their clinical translation, compounded by challenges in their applicability and manufacturing. Future development must address these obstacles for clinical utility. Here, after unravelling the history, diversity, and therapeutic use of depolymerases, we summarized the preclinical efficacy and existing formulation findings of recombinant depolymerases. Finally, the challenges and perspectives of depolymerases as therapeutics for humans were assessed to provide insights for their further development.

Compaction Properties of Particulate Proteins in Binary Powder Mixtures with Common Excipients

The increasing interest in protein- and peptide-based oral pharmaceuticals has culminated in the first protein-based products for oral delivery becoming commercially available. This study investigates the compaction properties of proteins in binary mixtures with common excipients up to 30% (w/w) of particulate protein. Two model proteins, lysozyme and bovine serum albumin, were compacted with either microcrystalline cellulose, spray-dried lactose monohydrate, or calcium hydrogen phosphate dihydrate at two different compaction pressures. Compared to the compacted pure materials, a significant increase in the tensile strength of the compacts was observed for the binary blends containing lysozyme together with the brittle excipients. This could be attributed to the increased bonding forces between the particles in the blend compared to the pure materials. The use of bovine serum albumin with a larger particle size resulted in a decrease in tensile strength for all the compacts. The change in the tensile strength with an increasing protein content was non-linear for both proteins. This work highlights the importance of considering the particulate properties of protein powders and that protein-based compacts can be designed with similar principles as small-molecules in terms of their mechanical tablet properties.

Targeting bacterial transcription factors for infection control: opportunities and challenges

The rising threat of antibiotic resistance in pathogenic bacteria emphasizes the need for new therapeutic strategies. This review focuses on bacterial transcription factors (TFs), which play crucial roles in bacterial pathogenesis. We discuss the regulatory roles of these factors through examples, and we outline potential therapeutic strategies targeting bacterial TFs. Specifically, we discuss the use of small molecules to interfere with TF function and the development of transcription factor decoys, oligonucleotides that compete with promoters for TF binding. We also cover peptides that target the interaction between the bacterial TF and other factors, such as RNA polymerase, and the targeting of sigma factors. These strategies, while promising, come with challenges, from identifying targets to designing interventions, managing side effects, and accounting for changing bacterial resistance patterns. We also delve into how Artificial Intelligence contributes to these efforts and how it may be exploited in the future, and we touch on the roles of multidisciplinary collaboration and policy to advance this research domain.Abbreviations: AI, artificial intelligence; CNN, convolutional neural networks; DTI: drug-target interaction; HTH, helix-turn-helix; IHF, integration host factor; LTTRs, LysR-type transcriptional regulators; MarR, multiple antibiotic resistance regulator; MRSA, methicillin resistant Staphylococcus aureus; MSA: multiple sequence alignment; NAP, nucleoid-associated protein; PROTACs, proteolysis targeting chimeras; RNAP, RNA polymerase; TF, transcription factor; TFD, transcription factor decoying; TFTRs, TetR-family transcriptional regulators; wHTH, winged helix-turn-helix.

Nontoxic Aggregation-Induced Emissive Luminogen for the Detection of Amyloid Fibrils and Cellular Protein Aggregates

Protein misfolding and aggregation resulting in amyloid formation is directly linked to various diseases. Hence, there is keen interest in developing probes for the selective detection of such misfolded aggregated proteins. In this paper, we have shown the use of a nontoxic aggregation-induced emissive luminogen (AIEgen), BIDCPV, for the selective detection of insulin amyloid fibrils and their various stages of formation. We further verified the selective response of BIDCPV toward amyloid fibrils by testing the probe against Aβ 42 peptides, which is well known to form the fibrils. Additionally, the low toxicity, efficient cellular internalization capability, and photostability make BIDCPV a unique candidate for sensing protein aggregates inside mammalian cells.

Design of an Oxygen-Tolerant Photo-RAFT System for Protein-Polymer Conjugation Achieving High Bioactivity

Protein-polymer conjugates have significant potential in pharmaceutical and biomedical applications. To enable their widespread use, robust conjugation techniques are crucial. This study introduces a photo-initiated reversible addition-fragmentation chain-transfer (Photo-RAFT) polymerization system that exhibits excellent oxygen tolerance. This system allows for the synthesis of protein-polymer conjugates with high bioactivity under mild and aerobic conditions. Three photocatalytic systems utilizing Eosin Y (EY) as the photocatalyst with two different cocatalysts (ascorbic acid and triethanolamine) were investigated, each generating distinct reactive oxygen species (ROS) such as singlet oxygen, superoxide, hydrogen peroxide, and hydroxyl radicals. The impact of these ROS on three model proteins (lysozyme, albumin, and myoglobin) was evaluated, demonstrating varying bioactivities based on the ROS produced. The EY/TEOA system was identified as the optimal photo-RAFT initiating system, enabling the preparation of protein-polymer conjugates under aerobic conditions while maintaining high protein enzymatic activity. To showcase the potential of this approach, lysozyme-poly(dimethylaminoethyl acrylate) conjugates were successfully prepared and exhibited enhanced antimicrobial property against Gram-positive and Gram-negative bacteria.

Application of Formulation Principles to Stability Issues Encountered During Processing, Manufacturing, and Storage of Drug Substance and Drug Product Protein Therapeutics

The field of formulation and stabilization of protein therapeutics has become rather extensive. However, most of the focus has been on stabilization of the final drug product. Yet, proteins experience stress and degradation through the manufacturing process, starting with fermentaition. This review describes how formulation principles can be applied to stabilize biopharmaceutical proteins during bioprocessing and manufacturing, considering each unit operation involved in prepration of the drug substance. In addition, the impact of the container on stabilty is discussed as well.

Precise surface functionalization of PLGA particles for human T cell modulation

The biofunctionalization of synthetic materials has extensive utility for biomedical applications, but approaches to bioconjugation typically show insufficient efficiency and controllability. We recently developed an approach by building synthetic DNA scaffolds on biomaterial surfaces that enables the precise control of cargo density and ratio, thus improving the assembly and organization of functional cargos. We used this approach to show that the modulation and phenotypic adaptation of immune cells can be regulated using our precisely functionalized biomaterials. Here, we describe the three key procedures, including the fabrication of polymeric particles engrafted with short DNA scaffolds, the attachment of functional cargos with complementary DNA strands, and the surface assembly control and quantification. We also explain the critical checkpoints needed to ensure the overall quality and expected characteristics of the biological product. We provide additional experimental design considerations for modifying the approach by varying the material composition, size or cargo types. As an example, we cover the use of the protocol for human primary T cell activation and for the identification of parameters that affect ex vivo T cell manufacturing. The protocol requires users with diverse expertise ranging from synthetic materials to bioconjugation chemistry to immunology. The fabrication procedures and validation assays to design high-fidelity DNA-scaffolded biomaterials typically require 8 d.

Viscosity Prediction of High-Concentration Antibody Solutions with Atomistic Simulations

The computational prediction of the viscosity of dense protein solutions is highly desirable, for example, in the early development phase of high-concentration biopharmaceutical formulations where the material needed for experimental determination is typically limited. Here, we use large-scale atomistic molecular dynamics (MD) simulations with explicit solvation to de novo predict the dynamic viscosities of solutions of a monoclonal IgG1 antibody (mAb) from the pressure fluctuations using a Green-Kubo approach. The viscosities at simulated mAb concentrations of 200 and 250 mg/mL are compared to the experimental values, which we measured with rotational rheometry. The computational viscosity of 24 mPa·s at the mAb concentration of 250 mg/mL matches the experimental value of 23 mPa·s obtained at a concentration of 213 mg/mL, indicating slightly different effective concentrations (or activities) in the MD simulations and in the experiments. This difference is assigned to a slight underestimation of the effective mAb-mAb interactions in the simulations, leading to a too loose dynamic mAb network that governs the viscosity. Taken together, this study demonstrates the feasibility of all-atom MD simulations for predicting the properties of dense mAb solutions and provides detailed microscopic insights into the underlying molecular interactions. At the same time, it also shows that there is room for further improvements and highlights challenges, such as the massive sampling required for computing collective properties of dense biomolecular solutions in the high-viscosity regime with reasonable statistical precision.

A low-energy emulsification platform based on a Diet Coke-Mentos reaction-derived bubbly flow for formulating various emulsions as drug carriers

The formulation of a drug using high-energy emulsification commonly causes drug deterioration. Exploiting the well-known Diet Coke-Mentos reaction (DCMR), a U-shaped tube reactor that can generate an eruption of bubbly flow that can serve as a low-energy emulsification platform, is proposed. The liquid in the U-tube reactor is a supersaturated solution of aqueous CO2, which mimics Diet Coke. When glass beads with rough surfaces, mimicking Mentos, are dropped into the carbonated water, an eruptive bubbly flow is spontaneously created, mediating effective emulsification at a compound water-oil interface. Experimental results demonstrate that DCMR-mediated bubbly flow may provide a versatile platform for the production of "oil-in-water" or "water-in-oil" droplets and Pickering emulsion composite particles as drug carriers. The DCMR-derived bubbly flow is generated without significant temperature elevation, so the activity of the drug to be emulsified is unaffected. In vivo results reveal the feasibility of using this low-energy emulsification platform to formulate an emulsion system that contains catalase, a temperature-sensitive oxidoreductase, to mitigate an experimentally formed paw inflammation in mice. The as-proposed emulsification platform is attractive for formulating numerous drug delivery systems on a small-scale in a customized manner to meet the needs of each individual for personalized medicine.

Studying Intermolecular Interactions in an Antibody-Drug Conjugate Through Chemical Screening and Computational Modeling

Antibody-drug conjugates (ADCs) combine the selectivity of antibodies with the cytotoxicity of drug payloads to yield highly targeted and potent therapeutics. Owing to the need to chemically modify residues for attachment of the payload and their more complex structure compared to either component alone, ADCs can present additional challenges related to stability of the final drug product. Here, we report for the first time the use of high-throughput experimental screens and computational techniques to tune the conformational and colloidal behavior of a monomethyl auristatin F-based ADC. The ADC, which exhibits high opalescence with strongly attractive protein-protein interactions, is transformed into a more stable structure by experimentally traversing a library of more than ∼100 formulations. A significant reduction in turbidity and increase in diffusion interaction parameter is observed by varying properties such as pH and ionic strength. Computational modeling rationalized these changes and pointed to the presence of attractive electrostatic interactions between ADC molecules facilitated by the drug payload and histidine residues. Taken together, the experimental and computational work presented provides a general roadmap of studies to perform during ADC development to find stable formulations, while the mechanistic learnings can be applied towards the design and stabilization of other IgG1-based ADCs.

Atmosphere-inspired multilayered nanoarmor with modulable protection and delivery of Interleukin-4 for inflammatory microenvironment modulation

Inflammatory bowel disease (IBD) has been closely associated with immune disorders and excessive M1 macrophage activation, which can be reversed by the M2-polarizing effect of interleukin-4 (IL-4). However, maintaining native IL-4 activity with its specific release in the inflammatory microenvironment and efficient biological performance remain a challenge. Inspired by the multilayered defense mechanism of the earth's atmosphere, we constructed a multilayered protective nanoarmor (NA) for IL-4 delivery (termed as IL-4@PEGRA NAs) into an intricate inflammatory microenvironment. The poly(ethylene glycol) (PEG)-ylated phenolic rosmarinic acid (RA)-grafted copolymer contains two protective layers-the intermediate polyphenol (RA molecules) and outermost shield (PEG) layers-to protect the biological activity of IL-4 and prolong its circulation in blood. Moreover, IL-4@PEGRA NAs scavenge reactive oxygen species with the specific release of IL-4 and maximize its biofunction at the site of inflammation, leading to M2 macrophage polarization and downregulation of inflammatory mediators. Simultaneously, gut microbiota dysbiosis can improve to amplify the M2-polarizing effect and inhibit the phosphatidylinositol 3 kinase/Akt signaling pathway, thereby attenuating inflammation and promoting colitis tissue repair. It provides a nature-inspired strategy for constructing an advanced multilayered NA delivery system with protective characteristics and potential for IBD management.

Comparative Stability Study of Polysorbate 20 and Polysorbate 80 Related to Oxidative Degradation

The surfactants polysorbate 20 (PS20) and polysorbate 80 (PS80) are utilized to stabilize protein drugs. However, concerns have been raised regarding the degradation of PSs in biologics and the potential impact on product quality. Oxidation has been identified as a prevalent degradation mechanism under pharmaceutically relevant conditions. So far, a systematic stability comparison of both PSs under pharmaceutically relevant conditions has not been conducted and little is known about the dependence of oxidation on PS concentration. Here, we conducted a comparative stability study to investigate (i) the different oxidative degradation propensities between PS20 and PS80 and (ii) the impact of PS concentration on oxidative degradation. PS20 and PS80 in concentrations ranging from 0.1 mg⋅mL-1 to raw material were stored at 5, 25, and 40 °C for 48 weeks in acetate buffer pH 5.5 and water, respectively. We observed a temperature-dependent oxidative degradation of the PSs with strong (40 °C), moderate (25 °C), and weak/no degradation (5 °C). Especially at elevated temperatures such as 40 °C, fast oxidative PS degradation processes were detected. In this case study, a stronger degradation and earlier onset of oxidation was observed for PS80 in comparison to PS20, detected via the fluorescence micelle assay. Additionally, degradation was found to be strongly dependent on PS concentration, with significantly less oxidative processes at higher PS concentrations. Iron impurities, oxygen in the vial headspaces, and the pH values of the formulations were identified as the main contributing factors to accelerate PS oxidation.

Role of Poloxamer 188 in Preventing Ice-Surface-Induced Protein Destabilization during Freeze-Thawing

The phase behavior of poloxamer 188 (P188) in aqueous solutions, characterized by differential scanning calorimetry (DSC) and synchrotron X-ray diffractometry, revealed solute crystallization during both freezing and thawing. Sucrose and trehalose inhibited P188 crystallization during freeze-thawing (FT). While trehalose inhibited P188 crystallization only during cooling, sucrose completely suppressed P188 crystallization during both cooling and heating. Lactate dehydrogenase (LDH) served as a model protein to evaluate the stabilizing effect of P188. The ability of P188, over a concentration range of 0.003-0.800% w/v, to prevent LDH (10 μg/mL) destabilization was evaluated. After five FT cycles, the aggregation behavior (by dynamic light scattering) and activity recovery were evaluated. While LDH alone was sensitive to interfacial stress, P188 at concentrations of ≥0.100% w/v stabilized the protein. However, as the surfactant concentration decreased, protein aggregation after FT increased. The addition of sugar (1.0% w/v; sucrose or trehalose) improved the stabilizing function of P188 at lower concentrations (≤0.010% w/v), possibly due to the inhibition of surfactant crystallization. Based on a comparison with the stabilization effect of polysorbate (both 20 and 80), it was evident that P188 could be a promising alternative surfactant in frozen protein formulations. However, when the surfactant concentration is low, the potential for P188 crystallization and the consequent compromise in its functionality warrant careful consideration.

New insights into the protein stabilizing effects of trehalose by comparing with sucrose

Disaccharides are well known to be efficient stabilizers of proteins, for example in the case of lyophilization or cryopreservation. However, although all disaccharides seem to exhibit bioprotective and stabilizing properties, it is clear that trehalose is generally superior compared to other disaccharides. The aim of this study was to understand this by comparing how the structural and dynamical properties of aqueous trehalose and sucrose solutions influence the protein myoglobin (Mb). The structural studies were based on neutron and X-ray diffraction in combination with empirical potential structure refinement (EPSR) modeling, whereas the dynamical studies were based on quasielastic neutron scattering (QENS) and molecular dynamics (MD) simulations. The results show that the overall differences in the structure and dynamics of the two systems are small, but nevertheless there are some important differences which may explain the superior stabilizing effects of trehalose. It was found that in both systems the protein is preferentially hydrated by water, but that this effect is more pronounced for trehalose, i.e. trehalose forms less hydrogen bonds to the protein surface than sucrose. Furthermore, the rotational motion around dihedrals between the two glucose rings of trehalose is slower than in the case of the dihedrals between the glucose and fructose rings of sucrose. This leads to a less perturbed protein structure in the case of trehalose. The observations indicate that an aqueous environment closest to the protein molecules is beneficial for an efficient bioprotective solution.

Rationally Tailored Mesoporous Hosts for Optimal Protein Encapsulation

Proteins play important roles in the therapeutic, medical diagnostic, and chemical catalysis industries. However, their potential is often limited by their fragile and dynamic nature outside cellular environments. The encapsulation of proteins in solid materials has been widely pursued as a route to enhance their stability and ease of handling. Nevertheless, the experimental investigation of protein interactions with rationally designed synthetic hosts still represents an area in need of improvement. In this work, we leveraged the tunability and crystallinity of metal-organic frameworks (MOFs) and developed a series of crystallographically defined protein hosts with varying chemical properties. Through systematic studies, we identified the dominating mechanisms for protein encapsulation and developed a host material with well-tailored properties to effectively encapsulate the protein ubiquitin. Specifically, in our mesoporous hosts, we found that ubiquitin encapsulation is thermodynamically favored. A more hydrophilic encapsulation environment with favorable electrostatic interactions induces enthalpically favored ubiquitin-MOF interactions, and a higher pH condition reduces the intraparticle diffusion barrier, both leading to a higher protein loading. Our findings provide a fundamental understanding of host-guest interactions between proteins and solid matrices and offer new insights to guide the design of future protein host materials to achieve optimal protein loading. The MOF modification technique used in this work also demonstrates a facile method to develop materials easily customizable for encapsulating proteins with different surface properties.

Modulation of the Fibrillation Kinetics and Morphology of a Therapeutic Peptide by Cucurbit[7]uril

Fibrillation is a challenge commonly encountered in the formulation and development of therapeutic peptides. Cucurbit[7]urils (CB[7]), a group of water soluble macrocycles, have been reported to suppress fibrillation in insulin and human calcitonin through association with Phe and Tyr residues which drive fibril formation. Here, we report the effect of CB[7] on the fibrillation behavior of the HIV fusion inhibitor enfuvirtide (ENF) that contains N-terminal Tyr and C-terminal Phe residues. Thioflavin T fluorescence, CD spectroscopy, and transmission electron microscopy were used to monitor fibrillation behavior. Fibrillation onset showed a strong pH dependency, with pH 6.5 identified as the condition most suitable to monitor the effects of CB[7]. Binding of CB[7] to wild-type ENF was measured by isothermal titration calorimetry and was consistent with a single site (K_a = 2.4 × 10⁵ M^-1). A weaker interaction (K_a = 2.8 × 10³ M^-1) was observed for an ENF mutant with the C-terminal Phe substituted for Ala (ENFm), suggesting that Phe was the specific site for CB[7] recognition. The onset of ENF fibrillation onset was delayed, rather than fully suppressed, in the presence of CB[7]. The ENFm mutant showed a greater delay in fibrillation onset but with no observable effect on fibrillation kinetics in the presence of CB[7]. Interestingly, ENF/CB[7] and ENFm fibrils exhibited comparable morphologies, differing from those observed for ENF alone. The results indicate that CB[7] is capable of modulating fibrillation onset and the resulting ENF fibrils by specifically binding to the C-terminal Phe residue. The work reinforces the potential of CB[7] as an inhibitor of fibrillation and highlights its role in determining fibril morphologies.

Versatile delivery platform for nucleic acids, negatively charged protein drugs, and genome-editing ribonucleoproteins using a multi-step transformable polyrotaxane

Various biopharmaceuticals, such as nucleic acids, proteins, and genome-editing molecules, have been developed. Generally, carriers are prepared for each biopharmaceutical to deliver it intracellularly; thus, the applications of individual carriers are limited. Moreover, the development of carriers is laborious and expensive. Therefore, in the present study, versatile and universal delivery carriers were developed for various biopharmaceuticals using aminated polyrotaxane libraries. Step-by-step and logical screening revealed that aminated polyrotaxane, including the carbamate bond between the axile molecule and endcap, is suitable as a backbone polymer. Movable and flexible properties of the amino groups modified on polyrotaxane facilitated efficient complexation with various biopharmaceuticals, such as small interfering RNA, antisense oligonucleotides, messenger RNA, β-galactosidase, and genome-editing ribonucleoproteins. Diethylenetriamine and cystamine modifications of polyrotaxane provided endosomal-escape abilities and drug-release properties in the cytosol, allowing higher delivery efficacies than commercially available high-standard carriers without cytotoxicity. Thus, the resulting polyrotaxane might serve as a versatile and universal delivery platform for various biopharmaceuticals.

Intracellular delivery of therapeutic proteins. New advancements and future directions

Achieving the full potential of therapeutic proteins to access and target intracellular receptors will have enormous benefits in advancing human health and fighting disease. Existing strategies for intracellular protein delivery, such as chemical modification and nanocarrier-based protein delivery approaches, have shown promise but with limited efficiency and safety concerns. The development of more effective and versatile delivery tools is crucial for the safe and effective use of protein drugs. Nanosystems that can trigger endocytosis and endosomal disruption, or directly deliver proteins into the cytosol, are essential for successful therapeutic effects. This article aims to provide a brief overview of the current methods for intracellular protein delivery to mammalian cells, highlighting current challenges, new developments, and future research opportunities.

Identification of monoclonal antibody drug substances using non-destructive Raman spectroscopy

Monoclonal antibodies provide highly specific and effective therapies for the treatment of chronic diseases. These protein-based therapeutics, or drug substances, are transported in single used plastic packaging to fill finish sites. According to good manufacturing practice guidelines, each drug substance needs to be identified before manufacturing of the drug product. However, considering their complex structure, it is challenging to correctly identify therapeutic proteins in an efficient manner. Common analytical techniques for therapeutic protein identification are SDS-gel electrophoresis, enzyme linked immunosorbent assays, high performance liquid chromatography and mass spectrometry-based assays. Although effective in correctly identifying the protein therapeutic, most of these techniques need extensive sample preparation and removal of samples from their containers. This step not only risks contamination but the sample taken for the identification is destroyed and cannot be re-used. Moreover, these techniques are often time consuming, sometimes taking several days to process. Here, we address these challenges by developing a rapid and non-destructive identification technique for monoclonal antibody-based drug substances. Raman spectroscopy in combination with chemometrics were used to identify three monoclonal antibody drug substances. This study explored the impact of laser exposure, time out of refrigerator and multiple freeze thaw cycles on the stability of monoclonal antibodies. and demonstrated the potential of using Raman spectroscopy for the identification of protein-based drug substances in the biopharmaceutical industry.

Delivery Systems in Ocular Retinopathies: The Promising Future of Intravitreal Hydrogels as Sustained-Release Scaffolds

Slow-release delivery systems are needed to ensure long-term sustained treatments for retinal diseases such as age-related macular degeneration and diabetic retinopathy, which are currently treated with anti-angiogenic agents that require frequent intraocular injections. These can cause serious co-morbidities for the patients and are far from providing the adequate drug/protein release rates and required pharmacokinetics to sustain prolonged efficacy. This review focuses on the use of hydrogels, particularly on temperature-responsive hydrogels as delivery vehicles for the intravitreal injection of retinal therapies, their advantages and disadvantages for intraocular administration, and the current advances in their use to treat retinal diseases.

Chemometrics in Protein Formulation: Stability Governed by Repulsion and Protein Unfolding

Therapeutic proteins can be challenging to develop due to their complexity and the requirement of an acceptable formulation to ensure patient safety and efficacy. To date, there is no universal formulation development strategy that can identify optimal formulation conditions for all types of proteins in a fast and reliable manner. In this work, high-throughput characterization, employing a toolbox of five techniques, was performed on 14 structurally different proteins formulated in 6 different buffer conditions and in the presence of 4 different excipients. Multivariate data analysis and chemometrics were used to analyze the data in an unbiased way. First, observed changes in stability were primarily determined by the individual protein. Second, pH and ionic strength are the two most important factors determining the physical stability of proteins, where there exists a significant statistical interaction between protein and pH/ionic strength. Additionally, we developed prediction methods by partial least-squares regression. Colloidal stability indicators are important for prediction of real-time stability, while conformational stability indicators are important for prediction of stability under accelerated stress conditions at 40 °C. In order to predict real-time storage stability, protein-protein repulsion and the initial monomer fraction are the most important properties to monitor.

Accelerating therapeutic protein design with computational approaches toward the clinical stage

Therapeutic protein, represented by antibodies, is of increasing interest in human medicine. However, clinical translation of therapeutic protein is still largely hindered by different aspects of developability, including affinity and selectivity, stability and aggregation prevention, solubility and viscosity reduction, and deimmunization. Conventional optimization of the developability with widely used methods, like display technologies and library screening approaches, is a time and cost-intensive endeavor, and the efficiency in finding suitable solutions is still not enough to meet clinical needs. In recent years, the accelerated advancement of computational methodologies has ushered in a transformative era in the field of therapeutic protein design. Owing to their remarkable capabilities in feature extraction and modeling, the integration of cutting-edge computational strategies with conventional techniques presents a promising avenue to accelerate the progression of therapeutic protein design and optimization toward clinical implementation. Here, we compared the differences between therapeutic protein and small molecules in developability and provided an overview of the computational approaches applicable to the design or optimization of therapeutic protein in several developability issues.

Engineering protein-based therapeutics through structural and chemical design

Protein-based therapeutics have led to new paradigms in disease treatment. Projected to be half of the top ten selling drugs in 2023, proteins have emerged as rivaling and, in some cases, superior alternatives to historically used small molecule-based medicines. This review chronicles both well-established and emerging design strategies that have enabled this paradigm shift by transforming protein-based structures that are often prone to denaturation, degradation, and aggregation in vitro and in vivo into highly effective therapeutics. In particular, we discuss strategies for creating structures with increased affinity and targetability, enhanced in vivo stability and pharmacokinetics, improved cell permeability, and reduced amounts of undesired immunogenicity.

Cellular Delivery of Large Functional Proteins and Protein-Nucleic Acid Constructs via Localized Electroporation

Delivery of proteins and protein-nucleic acid constructs into live cells enables a wide range of applications from gene editing to cell-based therapies and intracellular sensing. However, electroporation-based protein delivery remains challenging due to the large sizes of proteins, their low surface charge, and susceptibility to conformational changes that result in loss of function. Here, we use a nanochannel-based localized electroporation platform with multiplexing capabilities to optimize the intracellular delivery of large proteins (β-galactosidase, 472 kDa, 75.38% efficiency), protein-nucleic acid conjugates (protein spherical nucleic acids (ProSNA), 668 kDa, 80.25% efficiency), and Cas9-ribonucleoprotein complex (160 kDa, ∼60% knock-out and ∼24% knock-in) while retaining functionality post-delivery. Importantly, we delivered the largest protein to date using a localized electroporation platform and showed a nearly 2-fold improvement in gene editing efficiencies compared to previous reports. Furthermore, using confocal microscopy, we observed enhanced cytosolic delivery of ProSNAs, which may expand opportunities for detection and therapy.

DNA Hydrogel-Based Nanocomplexes with Cancer-Targeted Delivery and Light-Triggered Peptide Drug Release for Cancer-Specific Therapeutics

Cancer therapies based on chemotherapeutic drug delive ries have been the most facilitated studies. Recently, peptide drugs have emerged as anticancer drugs due to their less immunogenicity and lower production costs compared with other synthetics. However, still, the side effects of these chemotherapeutics on healthy tissues have been a great concern to deal with, and these side effects are usually caused by off-targeted delivery and unwanted leakage. In addition, peptides are easily degraded by enzyme attacks during delivery. To address these concerns, here, we developed a robust, cancer-specific peptide drug delivery system with negligible cytotoxicity in in vitro. A peptide drug delivery vehicle (Dgel-PD-AuNP-YNGRT) was constructed by stepwise functionalization on a nanoscale DNA hydrogel (Dgel). A cell-penetrating anticancer peptide drug, Buforin IIb, was loaded within the Dgel network via electrostatic attraction followed by AuNP assembly. The AuNPs were employed as photothermal reagents for light-triggered peptide drug release. An additional peptide, including a cancer-targeting YNGRT sequence, was also bound on the Dgel for cancer-cell-targeted delivery. According to the results obtained from the studies employing cancer cells as well as normal cells, Dgel-PD-AuNP-YNGRT nanocomplexes could be delivered specifically to cancer cells, activated by light illumination, and release anticancer peptide drugs to kill cancer cells with no cytotoxicity and negligible hazardous effect on normal cell lines. The obtained cell viability assay suggests that at a high intensity (15 W/cm²), photothermally triggered released peptide drug has shown up to 44% higher kill than only peptide drug treatments in cancer cells. Similarly, the Bradford assay demonstrated that up to 90% of peptide drugs were released with our engineered Dgel-PD-AuNP-YNGRT nanocomplex. The Dgel-PD-AuNP-YNGRT nanocomplex may serve as an ideal anticancer peptide drug delivery platform for safe, cancer-specific targeting and efficient peptide drug delivery in cancer therapy.

Existence of a superior polysorbate fraction in respect to protein stabilization and particle formation?

Biologicals including monoclonal antibodies are the current flagships in pharmaceutical industry. However, they are exposed to a multitude of destabilization conditions like for instance hydrophobic interfaces, leading to reduced biological activity. Polysorbates are commonly applied to effectively stabilize these active pharmaceutical ingredients against colloidal stress. Nevertheless, chemical instability of polysorbate via hydrolysis or oxidation results in degradation products that might form particles via phase separation. Polysorbates are mixtures of hundreds of individual components, and recently purer quality grades with reduced variations in the fatty acid composition are available. As the protective function of polysorbate itself is not completely understood, even less is known about its individual components, raising the question of the existence of a superior polysorbate species in respect to protein stabilization or degradation susceptibility. Here, we evaluated the protective function of four main fractions of polysorbate 20 (PS20) in agitation studies with monoclonal antibodies, followed by particle analysis as well as protein and polysorbate content determination. The commercially-available inherent mixtures PS20 high purity and PS20 all-laurate, as well as the fraction isosorbide-POE-monolaurate showed superior protection against mechanical-induced stress (visual inspection and turbidity) at the air-water interface in comparison to sole sorbitan-POE-monolaurate, -dilaurate, and -trilaurate. Fractions composed mainly of higher-order esters like sorbitan-POE-dilaurate and sorbitan-POE-trilaurate indicated high turbidities as indication for subvisible and small particles accompanied by a reduced protein monomer content after agitation. For the isosorbide-POE-monolaurates as well as for the inherent polysorbate mixtures no obvious differences in protein content and protein aggregation (SEC) were observed, reflecting the observations from visual appearance. However, absolute polysorbate concentrations vary drastically between different species in the actual formulations. As there are still open questions in respect to protein specificity or regarding mixtures versus individual components of PS20, further studies must be performed, to gain a better understanding of a "generalized" stabilizing effect of polysorbates on monoclonal antibodies. The knowledge of the characteristics of individual polysorbate species can have the potential to pave the way to superior detergents in respect to protein stabilization and/or degradation susceptibility.