Boosting hot electron flux and catalytic activity at metal-oxide interfaces of PtCo bimetallic nanoparticles

The spin polarization strategy regulates heterogeneous catalytic activity performance: from fundamentals to applications

In recent years, there has been significant attention towards the development of catalysts that exhibit superior performance and environmentally friendly attributes. This surge in interest is driven by the growing demands for energy utilization and storage as well as environmental preservation. Spin polarization plays a crucial role in catalyst design, comprehension of catalytic mechanisms, and reaction control, offering novel insights for the design of highly efficient catalysts. However, there are still some significant research gaps in the current study of spin catalysis. Therefore, it is urgent to understand how spin polarization impacts catalytic reactions to develop superior performance catalysts. Herein, we present a comprehensive summary of the application of spin polarization in catalysis. Firstly, we summarize the fundamental mechanism of spin polarization in catalytic reactions from two aspects of kinetics and thermodynamics. Additionally, we review the regulation mechanism of spin polarization in various catalytic applications and several approaches to modulate spin polarization. Moreover, we discuss the future development of spin polarization in catalysis and propose several potential avenues for further progress. We aim to improve current catalytic systems through implementing a novel and distinctive spin engineering strategy.

Breaking Continuously Packed Bimetallic Sites to Singly Dispersed on Nonmetallic Support for Efficient Hydrogen Production

We have synthesized Pt1Zn3/ZnO, also termed 0.01 wt %Pt/ZnO-O2-H2, as a catalyst containing singly dispersed single-atom bimetallic sites, also called a catalyst of singly dispersed bimetallic sites or a catalyst of isolated single-atom bimetallic sites. Its catalytic activity in partial oxidation of methanol to hydrogen at 290 °C is found to be 2-3 orders of magnitude higher than that of Pt-Zn bimetallic nanoparticles supported on ZnO, 5.0 wt %Pt/ZnO-N2-H2. Selectivity for H2 on Pt1Zn3/ZnO reaches 96%-100% at 290-330 °C, arising from the uniform coordination environment of single-atom Pt1 in singly dispersed single-atom bimetallic sites, Pt1Zn3 on 0.01 wt %Pt/ZnO-O2-H2, which is sharply different from various coordination environments of Pt atoms in coexisting PtxZny (x ≥ 0, y ≥ 0) sites on Pt-Zn bimetallic nanoparticles. Computational simulations attribute the extraordinary catalytic performance of Pt1Zn3/ZnO to the stronger adsorption of methanol and the lower activation barriers in O-H dissociation of CH3OH, C-H dissociations of CH2O to CO, and coupling of intermediate CO with atomic oxygen to form CO2 on Pt1Zn3/ZnO as compared to those on Pt-Zn bimetallic nanoparticles. It demonstrates that anchoring uniform, isolated single-atom bimetallic sites, also called singly dispersed bimetallic sites on a nonmetallic support can create new catalysts for certain types of reactions with much higher activity and selectivity in contrast to bimetallic nanoparticle catalysts with coexisting, various metallic sites MxAy (x ≥ 0, y ≥ 0). As these single-atom bimetallic sites are cationic and anchored on a nonmetallic support, the catalyst of singly dispersed single-atom bimetallic sites is different from a single-atom alloy nanoparticle catalyst. The critical role of the 0.01 wt %Pt in the extraordinary catalytic performance calls on fundamental studies of the profound role of a trace amount of a metal in heterogeneous catalysis.

Enhanced Light-Matter Interaction in Metallic Nanoparticles: A Generic Strategy of Smart Void Filling

The intrinsic properties of materials play a substantial role in light-matter interactions, impacting both bulk metals and nanostructures. While plasmonic nanostructures exhibit strong interactions with photons via plasmon resonances, achieving efficient light absorption/scattering in other transition metals remains a challenge, impeding various applications related to optoelectronics, chemistry, and energy harvesting. Here, we propose a universal strategy to enhance light-matter interaction, through introducing voids onto the surface of metallic nanoparticles. This strategy spans nine metals including those traditionally considered optically inactive. The absorption cross section of void-filled nanoparticles surpasses the value of plasmonic (Ag/Au) counterparts with tunable resonance peaks across a broad spectral range. Notably, this enhancement is achieved under arbitrary polarizations and varied particle sizes and in the presence of geometric disorder, highlighting the universal adaptability. Our strategy holds promise for inspiring emerging devices in photocatalysis, bioimaging, optical sensing, and beyond, particularly when metals other than gold or silver are preferred.

Revealing the Loss Mechanism of Chemically-Induced Hot Electron Transport

Hot electrons are crucial for unraveling the intrinsic relationship between chemical reactions and charge transfer in heterogeneous catalysis. Significant research focused on real-time detection of reaction-driven hot electron flow (chemicurrent) to elucidate the energy conversion mechanisms, but it remains elusive because carrier generation contributes to only part of the entire process. Here, a theoretical model for quantifying the chemicurrent yield is presented by clarifying the contributions of hot carrier losses from the internal emission and multiple reflections. The experimental chemicurrent yield verifies our model with a reliable mean free path of hot electrons, emphasizing the importance of comprehensive consideration of the transport process besides hot electron generation. Moreover, Pt nanoparticles (NPs)-decorated Au/TiO2 is examined, showing the role of NPs-induced carrier losses in the performance of catalytic nanodiodes. These findings are expected to contribute to understanding the hot electron detection efficiency and designing nanodiodes with enhanced hot carrier flow and catalytic activity.

Enhanced Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol over Silica-Coated Pt-CoxOy Hybrid Nanoparticles

Selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL) is difficult due to the intrinsic difficulty with thermodynamically easier hydrogenation of C═C bonds. In this work, Pt-CoxOy hybrid nanoparticles encapsulated in mesoporous silica nanospheres (Pt-CoxOy@mSiO2) were synthesized by a sol-gel method, which showed greatly improved COL selectivity for hydrogenation of CAL. At 80 °C and 1.0 MPa of H2, Pt-CoxOy@mSiO2 achieved a CAL conversion of 98.7% with a COL selectivity of 93.5%. In contrast, Pt@mSiO2 yields 3-phenylpropanol (HCOL) as the major product with HCOL selectivity of 67.2%, while PtCo@mSiO2 yields 3-phenylpropionaldehyde with selectivity of 51.8% under the same conditions. The enhanced catalytic performance of Pt-CoxOy@mSiO2 for hydrogenation of CAL to COL is ascribed to the Pt surface electron deficiency induced by metal-oxide interaction, and the protection of active NPs by silica shells results in good catalytic stability.

Enhanced Hot Electron Flow and Catalytic Synergy by Engineering Core-Shell Structures on Au-Pd Nanocatalysts

The synergistic catalytic performances of bimetallic catalysts are often attributed to the reaction mechanism associated with the alloying process of the catalytic metals. Chemically induced hot electron flux is strongly correlated with catalytic activity, and the interference between two metals at the atomic level can have a huge impact on the hot electron generation on the bimetallic catalysts. In this study, we investigate the correlation between catalytic synergy and hot electron chemistry driven by the electron coupling effect using a model system of Au-Pd bimetallic nanoparticles. We show that the bimetallic nanocatalysts exhibit enhanced catalytic activity under the hydrogen oxidation reaction compared with that of monometallic Pd nanocatalysts. Analysis of the hot electron flux generated in each system revealed the formation of Au/PdOx interfaces, resulting in high reactivity on the bimetallic catalyst. In further experiments with engineering the Au@Pd core-shell structures, we reveal that the hot electron flux, when the topmost surface Pd atoms were less affected by inner Au, due to the concrete shell, was smaller than the alloyed one. The alloyed bimetallic catalyst forming the metal-oxide interfaces has a more direct effect on the hot electron chemistry, as well as on the catalytic reactivity. The great significance of this study is in the confirmation that the change in the hot electron formation rate with the metal-oxide interfaces can be observed by shell engineering of nanocatalysts.

Ultralow reaction barriers for CO oxidation in Cu-Au nanoclusters

Systematic structure prediction of CunAum nanoclusters was carried out for a wide compositional area (n + m ≤ 15) using the evolutionary algorithm USPEX and DFT calculations. The obtained structural data allowed us to assess the local stability of clusters and their suitability for catalysis of CO oxidation. Using these two criteria, we selected several most promising clusters for an accurate study of their catalytic properties. The adsorption energies of reagents, reaction paths, and activation energies were calculated. We found several cases with low activation energies and explained these cases using the patterns of structural change at the moment of CO2 desorption. The unique case is the Cu7Au6 cluster, which has extremely low activation energies for all transition states (below 0.05 eV). We thus showed that higher flexibility due to the binary nature of nanoclusters makes it possible to achieve the maximum catalytic activity. Considering the lower price of copper, Cu-Au nanoparticles are a promising new family of catalysts.

How Hot Electron Generation at the Solid-Liquid Interface Is Different from the Solid-Gas Interface

Excitation of hot electrons by energy dissipation under exothermic chemical reactions on metal catalyst surfaces occurs at both solid-gas and solid-liquid interfaces. Despite extensive studies, a comparative operando study directly comparing electronic excitation by electronically nonadiabatic interactions at solid-gas and solid-liquid interfaces has not been reported. Herein, on the basis of our in situ techniques for monitoring energy dissipation as a chemicurrent using a Pt/n-Si nanodiode sensor, we observed the generation of hot electrons in both gas and liquid phases during H₂O₂ decomposition. As a result of comparing the current signal and oxygen evolution rate in the two phases, surprisingly, the efficiency of reaction-induced excitation of hot electrons increased by ∼100 times at the solid-liquid interface compared to the solid-gas interface. The boost of hot electron excitation in the liquid phase is due to the presence of an ionic layer lowering the potential barrier at the junction for transferring hot electrons.

Microporous 3D-Structured Hierarchically Entangled Graphene-Supported Pt3Co Alloy Catalyst for PEMFC Application with Process-Friendly Features

To improve the oxygen reduction reaction (ORR) performance in a proton-exchange membrane fuel cell (PEMFC) cathode with respect to mass activity and durability, a suitable electrocatalyst design strategy is essentially needed. Here, we have prepared a sub-three nm-sized platinum (Pt)-cobalt (Co) alloy (Pt₃Co)-supported N-doped microporous 3D graphene (Pt₃Co/pNEGF) by using the polyol synthesis method. A microwave-assisted synthesis method was employed to prepare the catalyst based on the 3D porous carbon support with a large pore volume and dense micro-/mesoporous surfaces. The ORR performance of Pt₃Co/pNEGF closely matches with the state-of-the-art commercial Pt/C catalyst in 0.1 M HClO₄, with a small overpotential of 10 mV. The 3D microporous structure of the N-doped graphene significantly improves the mass transport of the reactant and thus the overall ORR performance. As a result of the lower loading of Pt in Pt₃Co/pNEGF as compared to that in Pt/C, the alloy catalyst achieved 1.5 times higher mass activity than Pt/C. After 10,000 cycles, the difference in the electrochemically active surface area (ECSA) and half-wave potential (E_1/2) of Pt₃Co/pNEGF is found to be 5 m² g_Pt^-1 (ΔECSA) and 24 mV (ΔE_1/2), whereas, for Pt/C, these values are 9 m² g_Pt^-1 and 32 mV, respectively. Finally, in a realistic perspective, single-cell testing of a membrane electrode assembly (MEA) was made by sandwiching the Pt₃Co/pNEGF-coated gas diffusion layers as the cathode displayed a maximum power density of 800 mW cm^-2 under H₂-O₂ feed conditions with a clear indication of helping the system in the mass-transfer region (i.e., the high current dragging condition). The nature of the I-V polarization shows a progressively lower slope in this region of the polarization plot compared to a similar system made from its Pt/C counterpart and a significantly improved performance throughout the polarization region in the case of the system made from the Pt₃Co/NEGF catalyst (without the microwave treatment) counterpart. These results validate the better process friendliness of Pt₃Co/pNEGF as a PEMFC electrode-specific catalyst owing to its unique texture with 3D architecture and well-defined porosity with better structural endurance.

Performance of Cu/ZnO Nanosheets on Electrospun Al2O3 Nanofibers in CO2 Catalytic Hydrogenation to Methanol and Dimethyl Ether

The synthesis of methanol and dimethyl ether (DME) from carbon dioxide (CO₂) and green hydrogen (H₂) offers a sustainable pathway to convert CO₂ emissions into value-added products. This heterogeneous catalytic reaction often uses copper (Cu) catalysts due to their low cost compared with their noble metal analogs. Nevertheless, improving the activity and selectivity of these Cu catalysts for these products is highly desirable. In the present study, a new architecture of Cu- and Cu/Zn-based catalysts supported on electrospun alumina nanofibers were synthesized. The catalysts were tested under various reaction conditions using high-throughput equipment to highlight the role of the hierarchical fibrous structure on the reaction activity and selectivity. The Cu or Cu/ZnO formed a unique structure of nanosheets, covering the alumina fiber surface. This exceptional morphology provides a large surface area, up to ~300 m²/g, accessible for reaction. Maximal production of methanol (~1106 g_methanolKg_Cu^-1∙h^-1) and DME (760 g_DMEKg_Cu^-1∙h^-1) were obtained for catalysts containing 7% wt. Cu/Zn with a weight ratio of 2.3 Zn to Cu (at 300 °C, 50 bar). The promising results in CO₂ hydrogenation to methanol and DME obtained here point out the significant advantage of nanofiber-based catalysts in heterogeneous catalysis.

Hot Electron Phenomena at Solid-Liquid Interfaces

Understanding the role of energy dissipation and charge transfer under exothermic chemical reactions on metal catalyst surfaces is important for elucidating the fundamental phenomena at solid-gas and solid-liquid interfaces. Recently, many surface chemistry studies have been conducted on the solid-liquid interface, so correlating electronic excitation in the liquid-phase with the reaction mechanism plays a crucial role in heterogeneous catalysis. In this review, we introduce the detection principle of electron transfer at the solid-liquid interface by developing cutting-edge technologies with metal-semiconductor Schottky nanodiodes. The kinetics of hot electron excitation are well correlated with the reaction rates, demonstrating that the operando method for understanding nonadiabatic interactions is helpful in studying the reaction mechanism of surface molecular processes. In addition to the detection of hot electrons excited by a catalytic reaction, we highlight recent results on how the transfer of the hot electrons influences surface chemical and photoelectrochemical reactions.

Modulating the Chemical Microenvironment of Pt Nanoparticles within Ultrathin Nanosheets of Isoreticular MOFs for Enhanced Catalytic Activity

The catalytic activity of metal nanoparticles (MNPs) embedded in metal-organic frameworks (MOFs) is affected by the electronic interactions between MNPs and MOFs. In this report, we fabricate a series of ultrathin nanosheets of isoreticular MOFs (NMOFs) with different metal nodes as supports and successfully encapsulate Pt NPs within these NMOFs, affording Pt@NMOF-Co, Pt@NMOF-Ni₁Co₁, Pt@NMOF-Ni₃Co₁, and Pt@NMOF-Ni nanocomposites. The microchemical environment on the surface of Pt NPs can be modulated by varying the metal nodes of NMOFs. The catalytic activity of the nanocomposites toward liquid-phase hydrogenation of 1-hexene shows obvious difference, in which Pt@NMOF-Ni possesses the highest activity followed by Pt@NMOF-Ni₃Co₁, Pt@NMOF-Ni₁Co₁, and Pt@NMOF-Co in a decreasing order of activity. Obviously, increasing gradually the amount of Ni²⁺ nodes in the carriers can improve the catalytic activity. The difference of catalytic activity of the nanocomposites might originate from the distinct electron interactions between Pt NPs and NMOFs, as ascertained by X-ray photoelectron spectroscopy spectrum and density functional theory calculations. This work provides a rare example that the catalytic activity of MNPs could be controlled by accurately regulating the microchemical environment using ultrathin NMOFs as supports.

Structural and Valence State Modification of Cobalt in CoPt Nanocatalysts in Redox Conditions

Platinum is the primary catalyst for many chemical reactions in the field of heterogeneous catalysis. However, platinum is both expensive and rare. Therefore, it is advantageous to combine Pt with another metal to reduce cost while also enhancing stability. To that end, Pt is often combined with Co to form Co-Pt nanocrystals. However, dynamical restructuring effects that occur during reaction in Co-Pt ensembles can impact catalytic properties. In this study, model Co₂Pt₃ nanoparticles supported on carbon were characterized during a redox cycle with two in situ approaches, namely, X-ray absorption spectroscopy (XAS) and scanning transmission electron microscopy (STEM) using a multimodal microreactor. The sample was exposed to temperatures up to 500 °C under H₂, and then to O₂ at 300 °C. Irreversible segregation of Co in the Co₂Pt₃ particles was seen during redox cycling, and substantial changes of the oxidation state of Co were observed. After H₂ treatment, a fraction of Co could not be fully reduced and incorporated into a mixed Co-Pt phase. Reoxidation of the sample increased Co segregation, and the segregated material had a different valence state than in the fresh, oxidized sample. This in situ study describes dynamical restructuring effects in CoPt nanocatalysts at the atomic scale that are crucial to understand in order to improve the design of catalysts used in major chemical processes.

Prominence of Cu in a plasmonic Cu-Ag alloy decorated SiO2@S-doped C3N4 core-shell nanostructured photocatalyst towards enhanced visible light activity

A series of Cu-Ag bimetal alloys decorated on SiO₂ and the fabrication of few-layer S-doped graphitic carbon nitride (SC) warped over it to form a core-shell nanostructured morphology have been demonstrated and well characterized through various physiochemical techniques. HRTEM data confirmed the formation of a compact nanojunction between the SiO₂ and SC, where Cu-Ag is embedded uniformly with an average particle size of 1.3 nm. The Ag : Cu (1 : 3) between SiO₂ and SC produces 1730 μmol h^-1 g^-1 of H₂ under visible light illumination. Moreover, 6.2-fold current enhancement in the case of Ag : Cu (1 : 3) as compared to the Ag-loaded core-shell nanostructured photocatalyst indicates higher electron-hole-pair separation. The excellent activity was due to the synergistic alloying and plasmonic effect of Ag and Cu. DFT studies reveal that the Cu atom in the Cu-Ag bimetal alloy plays a pivotal role in the generation of H₂, and the reaction proceeds via a 4-membered transition state. The mechanistic insight proceeds from the generation of hot electrons due to the LSPR effect and their transfer to the SC layer via a compact nanojunction.

Scalable Molten Salt Synthesis of Platinum Alloys Planted in Metal-Nitrogen-Graphene for Efficient Oxygen Reduction

Fuel cells are considered as a promising alternative to the existing traditional energy systems towards a sustainable future. Nevertheless, the synthesis of efficient and robust platinum (Pt) based catalysts remains a challenge for practical applications. In this work, we present a simple and scalable molten-salt synthesis method for producing a low-platinum (Pt) nanoalloy implanted in metal-nitrogen-graphene. The as-prepared low-Pt alloyed graphene exhibits a high oxygen reduction activity of 1.29 A mg_Pt ^-1 and excellent durability over 30 000 potential cycles. The catalyst nanoarchitecture of graphene encased Pt nanoalloy provides a robust capability against nanoparticle migration and corrosion due to a strong metal-support interaction. Similarly, advanced characterization and theoretical calculations show that the multiple active sites in platinum alloyed graphene synergistically account for the improved oxygen reduction. This work not only provides an efficient and robust low-Pt catalyst but also a facile design idea and scalable preparation technique for integrated catalysts to achieve more profound applications in fuel cells and beyond.

Unique structure of active platinum-bismuth site for oxidation of carbon monoxide

As the technology development, the future advanced combustion engines must be designed to perform at a low temperature. Thus, it is a great challenge to synthesize high active and stable catalysts to resolve exhaust below 100 °C. Here, we report that bismuth as a dopant is added to form platinum-bismuth cluster on silica for CO oxidation. The highly reducible oxygen species provided by surface metal-oxide (M-O) interface could be activated by CO at low temperature (~50 °C) with a high CO2 production rate of 487 μmolCO2·gPt-1·s-1 at 110 °C. Experiment data combined with density functional calculation (DFT) results demonstrate that Pt cluster with surface Pt-O-Bi structure is the active site for CO oxidation via providing moderate CO adsorption and activating CO molecules with electron transformation between platinum atom and carbon monoxide. These findings provide a unique and general approach towards design of potential excellent performance catalysts for redox reaction.

Electronic Control of Hot Electron Transport Using Modified Schottky Barriers in Metal-Semiconductor Nanodiodes

Hot electron flux, generated by both incident light energy and the heat of the catalytic reaction, is a major element for energy conversion at the surface. Controlling hot electron flux in a reversible manner is extremely important for achieving high energy conversion efficiency. Here we demonstrate that hot electron flux can be controlled by tuning the Schottky barrier height. This phenomenon was monitored by using a Schottky nanodiode composed of a metal-semiconductor. The formation of a Schottky barrier at a nanometer scale inevitably accompanies an intrinsic image potential between the metal-semiconductor junction, which lowers the effective Schottky barrier height. When a reverse bias is applied to the nanodiode, an additional image potential participates in a secondary barrier lowering, leading to the increased hot electron flow. Besides, a decrease of tunneling width results in facile electron transport through the barrier. The increased hot electron flux by the chemical reaction (chemicurrent) and by the photon absorption (photocurrent) indicates hot electrons are captured more effectively by modifying the Schottky barrier. This study can shed light on a quantitative understanding and application of charge behavior at metal-semiconductor interfaces, in solar energy conversion, or in a catalytic reaction.

Controlling hot electron flux and catalytic selectivity with nanoscale metal-oxide interfaces

Interaction between metal and oxides is an important molecular-level factor that influences the selectivity of a desirable reaction. Therefore, designing a heterogeneous catalyst where metal-oxide interfaces are well-formed is important for understanding selectivity and surface electronic excitation at the interface. Here, we utilized a nanoscale catalytic Schottky diode from Pt nanowire arrays on TiO2 that forms a nanoscale Pt-TiO2 interface to determine the influence of the metal-oxide interface on catalytic selectivity, thereby affecting hot electron excitation; this demonstrated the real-time detection of hot electron flow generated under an exothermic methanol oxidation reaction. The selectivity to methyl formate and hot electron generation was obtained on nanoscale Pt nanowires/TiO2, which exhibited ~2 times higher partial oxidation selectivity and ~3 times higher chemicurrent yield compared to a diode based on Pt film. By utilizing various Pt/TiO2 nanostructures, we found that the ratio of interface to metal sites significantly affects the selectivity, thereby enhancing chemicurrent yield in methanol oxidation. Density function theory (DFT) calculations show that formation of the Pt-TiO2 interface showed that selectivity to methyl formate formation was much larger in Pt nanowire arrays than in Pt films because of the different reaction mechanism.

Operando Surface Characterization on Catalytic and Energy Materials from Single Crystals to Nanoparticles

Modern surface science faces two major challenges, a materials gap and a pressure gap. While studies on single crystal surface in ultrahigh vacuum have uncovered the atomic and electronic structures of the surface, the materials and environmental conditions of commercial catalysis are much more complicated, both in the structure of the materials and in the accessible pressure range of analysis instruments. Model systems and operando surface techniques have been developed to bridge these gaps. In this Review, we highlight the current trends in the development of the surface characterization techniques and methodologies in more realistic environments, with emphasis on recent research efforts at the Korea Advanced Institute of Science and Technology. We show principles and applications of the microscopic and spectroscopic surface techniques at ambient pressure that were used for the characterization of atomic structure, electronic structure, charge transport, and the mechanical properties of catalytic and energy materials. Ambient pressure scanning tunneling microscopy and X-ray photoelectron spectroscopy allow us to observe the surface restructuring that occurs during oxidation, reduction, and catalytic processes. In addition, we introduce the ambient pressure atomic force microscopy that revealed the morphological, mechanical, and charge transport properties that occur during the catalytic and energy conversion processes. Hot electron detection enables the monitoring of catalytic reactions and electronic excitations on the surface. Overall, the information on the nature of catalytic reactions obtained with operando spectroscopic and microscopic techniques may bring breakthroughs in some of the global energy and environmental problems the world is facing.

Density functional study of relaxation of adsorbate vibration modes: Dominance of anharmonic interaction

Formulation and density functional workflow for calculating the lifetime of vibrational modes of molecular adsorbates on solid surfaces due to vibration-phonon coupling are presented. The anharmonic coupling is invoked to give the correct description of the origin of temperature dependence. Using pyrrolidine (C₄H₉N) absorbed on the Cu(001) surface as a concrete example, we show that the anharmonic coupling can be one to two orders more significant than the harmonic interaction for the broadening of vibrational spectra, especially as temperature increases. These results challenge the common assumption that the anharmonic interaction is weak and call for attention of considering its effect in quantum relaxation and related problems.

Enhanced flux of chemically induced hot electrons on a Pt nanowire/Si nanodiode during decomposition of hydrogen peroxide

Identifying the charge transfer at metal-semiconductor interfaces by detecting hot electrons is crucial for understanding the mechanism of catalytic reactions and the development of an engineered catalyst structure. Over the last two decades, the development of catalytic nanodiodes has enabled us to directly measure chemically induced hot electron flux and relate it to catalytic activity. A crucial question is the role of interfacial sites at metal-oxide interfaces in determining catalytic activity and hot electron flux. To address this issue, a new design of catalytic nanodiodes employs nanoscale Pt wires and a semiconducting substrate. Here, we fabricated a novel Schottky nanodiode, a platinum nanowire (Pt NW) deposited Si catalytic nanodiode (Pt NW/Si) that exhibits an increased number of metal-semiconductor interfacial sites (Pt/Si) compared with a Pt film-based Si nanodiode (Pt film/Si). Two types of Pt/Si catalytic nanodiodes were utilized to investigate the electronic properties of the Pt/Si interface by detecting hot electrons and observing reactivity during the H₂O₂ decomposition reaction in the liquid-solid system. We show that the Pt NWs had higher catalytic activity because of the surface defect sites on the Pt NW surface. We observed a higher chemicurrent yield on the Pt NW/Si nanodiode compared with the Pt film/Si nanodiode, which is associated with the shortened travel length for the hot electrons at the edge of the Pt nanowires and results in a higher transmission probability for hot electron transport through metal-oxide interfaces.

In Situ Visualization of Localized Surface Plasmon Resonance-Driven Hot Hole Flux

Nonradiative surface plasmon decay produces highly energetic electron-hole pairs with desirable characteristics, but the measurement and harvesting of nonequilibrium hot holes remain challenging due to ultrashort lifetime and diffusion length. Here, the direct observation of LSPR-driven hot holes created in a Au nanoprism/p-GaN platform using photoconductive atomic force microscopy (pc-AFM) is demonstrated. Significant enhancement of photocurrent in the plasmonic platforms under light irradiation is revealed, providing direct evidence of plasmonic hot hole generation. Experimental and numerical analysis verify that a confined |E|-field surrounding a single Au nanoprism spurs resonant coupling between localized surface plasmon resonance (LSPR) and surface charges, thus boosting hot hole generation. Furthermore, geometrical and size dependence on the extraction of LSPR-driven hot holes suggests an optimized pathway for their efficient utilization. The direct visualization of hot hole flow at the nanoscale provides significant opportunities for harnessing the underlying nature and potential of plasmonic hot holes.

Cu-Ag Bimetal Alloy Decorated SiO2@TiO2 Hybrid Photocatalyst for Enhanced H2 Evolution and Phenol Oxidation under Visible Light

With a broader objective to replace visible light driven Pt-based photoelectrochemical/catalytic hydrogen evolution, a series of cost-effective bimetallic nanoalloys of Cu-Ag have been deposited on core-shell nanostructured SiO₂@TiO₂ through a facile reduction route. The physicochemical properties, i.e. crystal structure, morphology, chemical environment, and optical properties of Cu-Ag bimetal alloy decorated SiO₂@TiO₂ hybrid photocatalyst, have been thoroughly investigated through X-ray diffraction, high resolution transmission electron microscopy, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy, respectively. TEM study confirms the coating of an ultrathin layer of TiO₂ shell on 100 nm sized SiO₂ core, and about 4.5 nm of Ag-Cu nanoalloys are uniformly distributed on the core-shell nanostructure. The higher light absorption throughout the visible range and better separation of charge carrier by Ag-Cu (1:3) deposited SiO₂@TiO₂ hybrid compared to other counterparts is confirmed from UV-vis, diffuse reflectance spectroscopy, photoluminescence, and electrochemical impedance studies. Eightfold higher photocurrent enhancements, threefold enhanced photocatalytic hydrogen generation, and twofold higher phenol oxidation activities of Ag-Cu (1:3) deposited SiO₂@TiO₂ hybrid compared to those of the monometallic plasmonic catalyst may be attributed to the synergetic effect of enriched light harvesting and surface plasmon induced hot electron transfer from the nanoalloy to the TiO₂ interface, resulting in efficient charge transfer.

Engineering Nanoscale Interfaces of Metal/Oxide Nanowires to Control Catalytic Activity

The interfacial effect between a metal catalyst and its various supporting transition metal oxides on the catalytic activity of heterogeneous catalysis has been extensively explored; engineering interfacial sites of metal supported on metal oxide has been found to influence catalytic performance. Here, we investigate the interfacial effect of Pt nanowires (NWs) vertically and alternatingly stacked with titanium dioxide (TiO₂) or cobalt monoxide (CoO) NWs, which exhibit a strong metal-support interaction under carbon monoxide (CO) oxidation. High-resolution nanotransfer printing based on nanoscale pattern replication and e-beam evaporation were utilized to obtain the Pt NWs cross-stacked on the CoO or TiO₂ NW on the silicon dioxide (SiO₂) substrate with varying numbers of nanowires. The morphology and interfacial area were precisely determined by means of atomic force microscopy and scanning electron microscopy. The cross-stacked Pt/TiO₂ NW and Pt/CoO NW catalysts were estimated with CO oxidation under 40 Torr CO and 100 Torr O₂ from 200 to 240 °C. Higher catalytic activity was found on the Pt/CoO NW catalyst than on Pt/TiO₂ NWs and Pt NWs, which indicates the significance of nanoscale metal-oxide interfaces. As the number of nanowire layers increased, the catalytic activity became saturated. Our study demonstrates the interfacial role of nanoscale metal-oxide interfaces under CO oxidation, which has intriguing applications in the smart design of catalytic materials.

Tuning the surface composition of Cu3Au binary alloy

Using ambient-pressure X-ray photoelectron spectroscopy, here we report the real-time monitoring of dynamic surface composition evolution of Cu₃Au(100) in response to the imposed environmental stimuli. Segregation of Au to the pristine surface under ultrahigh vacuum annealing leads to the phase separation with pure Au at the surface and alloyed Au in the subsurface. Upon switching to an oxidizing atmosphere, oxygen adsorption drives the surface segregation of Cu along with inward migration of pure Au to the subsurface. Switching to a H₂ atmosphere results in oxygen loss from the oxygenated surface, thereby promoting Au surface segregation and reverting the surface to the pristine state with the Au termination. These measurements demonstrated the tunability of the surface composition of the binary alloy by utilizing the interplay between the tendency of segregating a more noble constituent to the surface and the tendency to segregate the more reactive one with the chemical stimuli.

Surface-reaction induced structural oscillations in the subsurface

Surface and subsurface are commonly considered as separate entities because of the difference in the bonding environment and are often investigated separately due to the experimental challenges in differentiating the surface and subsurface effects. Using in-situ atomic-scale transmission electron microscopy to resolve the surface and subsurface at the same time, we show that the hydrogen-CuO surface reaction results in structural oscillations in deeper atomic layers via the cycles of ordering and disordering of oxygen vacancies in the subsurface. Together with atomistic calculations, we show that the structural oscillations in the subsurface are induced by the hydrogen oxidation-induced cyclic loss of oxygen from the oxide surface. These results demonstrate the propagation of the surface reaction dynamics into the deeper layers in inducing nonstoichiometry in the subsurface and have significant implications in modulating various chemical processes involving surface-subsurface mass transport such as heterogeneous catalysis, oxidation, corrosion and carburization.

N-Doped Graphene Oxide Decorated with PtCo Nanoparticles for Immobilization of Double-Stranded Deoxyribonucleic Acid and Investigation of Clenbuterol-Induced DNA Damage

We demonstrate here a facile hydrothermal-assisted formation of PtCo alloy nanoparticles (NPs) and their simultaneous anchoring on the graphitic surface of N-doped graphene oxide (NGO). Doping induced nanopores in the carbon surface to facilitate the uniform and homogeneous anchoring of alloy nanoparticles. It was revealed that the formation of PtCo NPs on an NGO interface plodded excellent tendency toward double-stranded deoxyribonucleic acid (dsDNA). The dsDNA immobilization was enabled by the presence of several oxidation states of Pt and Co. The same property was further used to monitor the direct detection of dsDNA damage induced by clenbuterol via screen-printed carbon electrodes. Cyclic voltammetric and electrochemical impedance spectroscopic characterization traced well the dsDNA attachment on the modified electrode surface. Differential pulsed voltammetry was further used as a tool to monitor the characteristic guanine peak before and after incubating with clenbuterol used as a damage probe for the dsDNA. The findings can further be appurtenant in exploring dsDNA immobilization protocols and developing analytical methods for determination of various dsDNA damaging agents.

Recent In Situ/Operando Spectroscopy Studies of Heterogeneous Catalysis with Reducible Metal Oxides as Supports

For heterogeneous catalysis, the metal catalysts supported on reducible metal oxides, especially CeO2 and TiO2, have long been a research focus because of their excellent catalytic performance in a variety of catalytic reactions. Detailed understanding of the promotion effect of reducible metal oxides on catalytic reactions is beneficial to the rational design of new catalysts. The important catalytic roles of reducible metal oxides are attributed to their intimate interactions with the supported metals (e.g., strong metal-support interaction, electronic metal-support interaction) and unique support structures (e.g., oxygen vacancy, reversible valence change, surface hydroxyl). However, the structures of the catalysts and reaction mechanisms are strongly affected by environmental conditions. For this reason, in situ/operando spectroscopy studies under working conditions are necessary to obtain accurate information about the structure-activity relationship. In this review, the recent applications of the in situ/operando spectroscopy methodology on metal catalysts with reducible metal oxides as supports are summarized.

Enhanced hot electron generation by inverse metal-oxide interfaces on catalytic nanodiode

Identifying the electronic behavior of metal-oxide interfaces is essential for understanding the origin of catalytic properties and for engineering catalyst structures with the desired reactivity. For a mechanistic understanding of hot electron dynamics at inverse oxide/metal interfaces, we employed a new catalytic nanodiode by combining Co3O4 nanocubes (NCs) with a Pt/TiO2 nanodiode that exhibits nanoscale metal-oxide interfaces. We show that the chemicurrent, which is well correlated with the catalytic activity, is enhanced at the inverse oxide/metal (CoO/Pt) interfaces during H2 oxidation. Based on quantitative visualization of the electronic transfer efficiency with chemicurrent yield, we show that electronic perturbation of oxide/metal interfacial sites not only promotes the generation of hot electrons, but improves catalytic activity.

The effect of the oxidation states of supported oxides on catalytic activity: CO oxidation studies on Pt/cobalt oxide

The strong metal–oxide interaction of platinum nanoparticles (PtNPs) deposited on two types of cobalt oxides, CoO and Co₃O₄, was investigated using CO oxidation.

New Strategy toward a Dual Functional Nanocatalyst at Ambient Conditions: Influence of the Pd-Co Interface in the Catalytic Activity of Pd@Co Core-Shell Nanoparticles

Bimetallic nanostructures with a combination of noble and nonnoble metals hold promise for improving catalyst activity and selectivity. Here, we report the synthesis of Pd@Co (PC) core-shell morphology nanoparticles with three different ratios of palladium (Pd) and cobalt (Co), and a possibility to fine tune the ratio of core and shell thickness. PC exhibits superior and selective hydrogenation as well as oxidation catalytic activity at ambient or near-ambient conditions. Various characterization techniques have been employed to confirm the core-shell morphology. Without any pre-treatment or activation, fresh catalysts with different Pd to Co ratios, that is, 2:1, 1:1, and 1:2, were subjected to olefin (phenylacetylene) hydrogenation and oxidation (styrene to styrene oxide) reaction. The catalytic activity results demonstrate that the 1:1 ratio of Pd/Co is the most active composition for controlled and stepwise reduction of phenyl acetylene to styrene and then to ethyl benzene; 1:1 Pd/Co shows 100% styrene conversion in 30 min. with an order of magnitude higher turnover frequency than other catalysts. The 1:1 PC ratio is also the most active composition for selective oxidation of styrene to styrene oxide. NAPXPS (near-ambient pressure XPS) results show that the active sites for catalytic C═C hydrogenation and oxidation reaction are Co⁰ and Co³⁺, respectively. However, the superior catalytic performance can be attributed to Co⁰ (for reduction) or Co³⁺ (for oxidation), and the Pd-Co interface plays a critical role in stabilizing the required functional character. NAPXPS results confirm that the superior catalytic performance can be attributed not only to Co⁰ or Co³⁺, but also to the Pd-Co interface. The electronic effect and synergism between Co and Pd helps Co to stabilize in different oxidation states depending on the reaction conditions, and making it a dual functional catalyst.

Compositional effect of two-dimensional monodisperse AuPd bimetallic nanoparticle arrays fabricated by block copolymer nanopatterning on catalytic activity of CO oxidation

We present a straightforward approach for fabricating AuPd nanocatalysts based on self-assembled block copolymer nanopatterning. CO oxidation was carried out on AuPd alloy nanoparticles and the activity increased with increasing Pd content; this synergistic activity can be precisely tuned by varying the chemical composition. Theoretical calculations suggest that Pd clusters are required to bind and dissociate O2 for oxidation of coadsorbed CO molecules. Our results suggest that the geometric configuration of the Pd atoms on the surface are a key factor in the catalytic activity.

Coherent nanoscale cobalt/cobalt oxide heterostructures embedded in porous carbon for the oxygen reduction reaction

Cost-effective and efficient electrocatalysts for the oxygen reduction reaction (ORR) are crucial for fuel cells and metal–air batteries.