Electroactive materials with tunable response based on block copolymer self-assembly

Fluoropolymer Nanoparticles Synthesized via Reversible-Deactivation Radical Polymerizations and Their Applications

Fluorinated polymeric nanoparticles (FPNPs) combine unique properties of fluorocarbon and polymeric nanoparticles, which has stimulated massive interest for decades. However, fluoropolymers are not readily available from nature, resulting in synthetic developments to obtain FPNPs via free radical polymerizations. Recently, while increasing cutting-edge directions demand tailored FPNPs, such materials have been difficult to access via conventional approaches. Reversible-deactivation radical polymerizations (RDRPs) are powerful methods to afford well-defined polymers. Researchers have applied RDRPs to the fabrication of FPNPs, enabling the construction of particles with improved complexity in terms of structure, composition, morphology, and functionality. Related examples can be classified into three categories. First, well-defined fluoropolymers synthesized via RDRPs have been utilized as precursors to form FPNPs through self-folding and solution self-assembly. Second, thermally and photoinitiated RDRPs have been explored to realize in situ preparations of FPNPs with varied morphologies via polymerization-induced self-assembly and cross-linking copolymerization. Third, grafting from inorganic nanoparticles has been investigated based on RDRPs. Importantly, those advancements have promoted studies toward promising applications, including magnetic resonance imaging, biomedical delivery, energy storage, adsorption of perfluorinated alkyl substances, photosensitizers, and so on. This Review should present useful knowledge to researchers in polymer science and nanomaterials and inspire innovative ideas for the synthesis and applications of FPNPs.

All-Polymer Piezo-Composites for Scalable Energy Harvesting and Sensing Devices

Silicone elastomer composites with piezoelectric properties, conferred by incorporated polyimide copolymers, with pressure sensors similar to human skin and kinetic energy harvester capabilities, were developed as thin film (<100 micron thick) layered architecture. They are based on polymer materials which can be produced in industrial amounts and are scalable for large areas (m2). The piezoelectric properties of the tested materials were determined using a dynamic mode of piezoelectric force microscopy. These composite materials bring together polydimethylsiloxane polymers with customized poly(siloxane-imide) copolymers (2−20 wt% relative to siloxanes), with siloxane segments inserted into the structure to ensure the compatibility of the components. The morphology of the materials as free-standing films was studied by SEM and AFM, revealing separated phases for higher polyimide concentration (10, 20 wt%). The composites show dielectric behavior with a low loss (<10−1) and a relative permittivity superior (3−4) to pure siloxane within a 0.1−106 Hz range. The composite in the form of a thin film can generate up to 750 mV under contact with a 30 g steel ball dropped from 10 cm high. This capability to convert a pressure signal into a direct current for the tested device has potential for applications in self-powered sensors and kinetic energy-harvesting applications. Furthermore, the materials preserve the known electromechanical properties of pure polysiloxane, with lateral strain actuation values of up to 6.2% at 28.9 V/μm.

Tunable and scalable fabrication of block copolymer-based 3D polymorphic artificial cell membrane array

Owing to their excellent durability, tunable physical properties, and biofunctionality, block copolymer-based membranes provide a platform for various biotechnological applications. However, conventional approaches for fabricating block copolymer membranes produce only planar or suspended polymersome structures, which limits their utilization. This study is the first to demonstrate that an electric-field-assisted self-assembly technique can allow controllable and scalable fabrication of 3-dimensional block copolymer artificial cell membranes (3DBCPMs) immobilized on predefined locations. Topographically and chemically structured microwell array templates facilitate uniform patterning of block copolymers and serve as reactors for the effective growth of 3DBCPMs. Modulating the concentration of the block copolymer and the amplitude/frequency of the electric field generates 3DBCPMs with diverse shapes, controlled sizes, and high stability (100% survival over 50 days). In vitro protein–membrane assays and mimicking of human intestinal organs highlight the potential of 3DBCPMs for a variety of biological applications such as artificial cells, cell-mimetic biosensors, and bioreactors.

In this manuscript, an electric-field-assisted self-assembly technique that can allow controllable and scalable fabrication of 3-dimensional block copolymer (BCP)-based artificial cell membranes (3DBCPMs) immobilized on predefined locations is presented.

Topographically and chemically structured microwell array templates facilitate uniform patterning of BCPs and serve as reactors for the effective growth of 3DBCPMs, which diverse shapes, sizes and stability can be tuned by modulating the BCP concentration and the amplitude/frequency of the electric field.

The potential of 3DBCPMs for a variety of biological applications is highlighted by performance of in vitro protein-membrane assays and mimicking of human intestinal organs.

Soft Ferroelectrics Enabling High-Performance Intelligent Photo Electronics

Soft ferroelectrics based on organic and organic-inorganic hybrid materials have gained much interest among researchers owing to their electrically programmable and remnant polarization. This allows for the development of numerous flexible, foldable, and stretchable nonvolatile memories, when combined with various crystal engineering approaches to optimize their performance. Soft ferroelectrics have been recently considered to have an important role in the emerging human-connected electronics that involve diverse photoelectronic elements, particularly those requiring precise programmable electric fields, such as tactile sensors, synaptic devices, displays, photodetectors, and solar cells for facile human-machine interaction, human safety, and sustainability. This paper provides a comprehensive review of the recent developments in soft ferroelectric materials with an emphasis on their ferroelectric switching principles and their potential application in human-connected intelligent electronics. Based on the origins of ferroelectric atomic and/or molecular switching, the soft ferroelectrics are categorized into seven subgroups. In this review, the efficiency of soft ferroelectrics with their distinct ferroelectric characteristics utilized in various human-connected electronic devices with programmable electric field is demonstrated. This review inspires further research to utilize the remarkable functionality of soft electronics.

May Trifluoromethylation and Polymerization of Styrene Occur from a Perfluorinated Persistent Radical (PPFR)?

The radical polymerization of styrene (St) initiated by a trifluoromethyl radical generated from a perfluorinated highly branched persistent radical (PPFR) is presented with an isolated yield above 70 %. The release of ^. CF₃ radical occurred from a temperature above 85 °C. Deeper ¹ H and ¹⁹ F NMR spectroscopies of the resulting fluorinated polystyrenes (CF₃ -PSts) evidenced the presence of both CF₃ end-group of the PSt chain and the trifluoromethylation of the phenyl ring (in meta-position mainly). [PPFR]₀ /[St]₀ initial molar ratios of 3:1, 3:10 and 3:100 led to various molar masses ranging from 1750 to 5400 g mol^-1 in 70-86 % yields. MALDI-TOF spectrometry of such CF₃ -PSts highlighted polymeric distributions which evidenced differences between m/z fragments of 104 and 172 corresponding to styrene and trifluoromethyl styrene units, respectively. Such CF₃ -PSt polymers were also compared to conventional PSts produced from the radical polymerization of St initiated by a peroxydicarbonate initiator. A mechanism of the polymerization is presented showing the formation of a trifluoromethyl styrene first, followed by its radical (co)polymerization with styrene. The thermal properties (thermal stability and glass transition temperature, T_g ) of these polymers were also compared and revealed a much better thermal stability of the CF₃ -PSt (10 % weight loss at 356-376 °C) and a T_g of around 70 °C.

Structural Insight in the Interfacial Effect in Ferroelectric Polymer Nanocomposites

Both experimental results and theoretical models suggest the decisive role of the filler-matrix interfaces on the dielectric, piezoelectric, pyroelectric, and electrocaloric properties of ferroelectric polymer nanocomposites. However, there remains a lack of direct structural evidence to support the so-called interfacial effect in dielectric nanocomposites. Here, a chemical mapping of the interfacial coupling between the nanofiller and the polymer matrix in ferroelectric polymer nanocomposites by combining atomic force microscopy-infrared spectroscopy (AFM-IR) with first-principles calculations and phase-field simulations is provided. The addition of ceramic fillers into a ferroelectric polymer leads to augmentation of the local conformational disorder in the vicinity of the interface, resulting in the local stabilization of the all-trans conformation (i.e., the polar β phase). The formation of highly polar and inhomogeneous interfacial regions, which is further enhanced with a decrease of the filler size, has been identified experimentally and verified by phase-field simulations and density functional theory (DFT) calculations. This work offers unprecedented structural insights into the configurational disorder-induced interfacial effect and will enable rational design and molecular engineering of the filler-matrix interfaces of electroactive polymer nanocomposites to boost their collective properties.

Tailored Self-Assembled Ferroelectric Polymer Nanostructures with Tunable Response

A facile ferroelectric nanostructures preparation method is developed based on the self-assembly of poly(2-vinylpyridine)-b-poly(vinylidene fluoride-co-trifluoroethylene)-b-poly(2-vinylpyridine) triblock copolymers (P2VP-b-P(VDF-TrFE)-b-P2VP), and the effect of morphological characteristics of the block copolymers on the ferroelectric response has been investigated for the first time. By simple adjustment of the ratio between the blocks, lamellar, cylindrical, and spherical morphologies are obtained in the melt and preserved upon crystallization of P(VDF-TrFE). However, at high P(VDF-TrFE) content, crystallization becomes dominant and drives the self-assembly of block copolymers. The crystallization study of the block copolymers reveals the preservation of the high degree of crystallinity inside the confined nanodomains as well as the reduction of the crystalline size and the Curie transition temperature with the confinement level. Only a small difference in the coercive field and the shape of the hysteresis loop is observed for block copolymers with a lamellar morphology produced either by crystallization-driven self-assembly or by confinement inside preformed lamellar domains. In contrast, delayed spontaneous polarization or the absence of dipole switching is demonstrated for the confinement of ferroelectric crystals inside both isolated cylindrical and spherical domains, exemplifying the influence of dimensionality on the critical size for ferroelectric order.

Tuning the dielectric behavior of poly(vinylidene fluoride-co-vinyl alcohol) using a facile urethane-based crosslinking method

Crosslinking poly(VDF-co-VA) copolymers leads to a change from ferroelectric to double hysteresis loop behavior when the crosslinking density is increased.