Colossal oxygen vacancy formation at a fluorite-bixbyite interface

Oxygen vacancies and Y-O-Ag bonds in the Z-scheme heterojunction cooperate to promote photodegradation of organic pollutants

Y2O3 is a cost-effective and environmentally friendly wide-band gap photocatalyst with extensive application potential. However, its limited ability to be excited by visible light restricts its practical uses. In this study, we coupled the narrow bandgap semiconductor AgI with Y2O3 to form a Z-scheme heterostructure, significantly promoting its photocatalytic degradation activity. Characterization and experimental results demonstrated the formation of Y-O-Ag bonds through coupling with AgI, leading to an increase in oxygen vacancies in Y2O3, which promotes the chemisorption of H2O and O2. The Y-O-Ag bond introduction promotes electron transfer, improves hole utilization, and boosts energy transfer efficiency, thus promoting the efficient generation of ·OH and 1O2. The photocatalytic degradation rates of RhB and o-nitrophenol by 7.5% AgI/Y2O3 were 26.5 and 4 times higher than those of pure Y2O3, respectively. This study provides theoretical support for the Z-scheme heterojunction to improve photocatalytic activity and offers efficient solutions and practical design ideas for sewage purification.

Surface-Integrating Oxygen Vacancy and CuxO Nanodots Enabling Synergistic Electric Field and Dual Catalytic Sites Boosting CO2 Photoreduction

High carrier separation efficiency and rapid surface catalytic reaction are crucial for enhancing catalytic CO2 photoreduction reaction. Herein, integrated surface decoration strategy with oxygen vacancies (Ov) and anchoring CuxO (1 < x < 2) nanodots below 10 nm is realized on Bi2MoO6 for promoting CO2 photoreduction performance. The charge interaction between Ov and anchored CuxO enables the formation of enhanced internal electric field, which provides a strong driving force for accelerating the separation of photocharge carriers on the surface of Bi2MoO6 (ηsurf ≈71%). They can also cooperatively reduce the surface work function of Bi2MoO6, facilitating the migration of carrier to the surface. Meanwhile, surface-integrated Ov and CuxO nanodots allowing dual catalytic sites strengthens the adsorption and activation CO2 into *CO2 over Bi2MoO6, considerably boosting the progression of CO2 conversion process. In the absence of co-catalyst or sacrificial agent, Bi2MoO6 with Ov and CuxO nanodots achieves a photocatalytic CO generation rate of 12.75 µmol g-1 h-1, a remarkable increase of over ≈15 times that of the original counterpart. This work provides a new idea for governing charge movement behaviors and catalytic reaction thermodynamics on the basis of synergistic improvement of electric field and active sites by coupling of the internal defects and external species.

Importing Antibonding-Orbital Occupancy through Pd-O-Gd Bridge Promotes Electrocatalytic Oxygen Reduction

The active-site density, intrinsic activity, and durability of Pd-based materials for oxygen reduction reaction (ORR) are critical to their application in industrial energy devices. This work constructs a series of carbon-based rare-earth (RE) oxides (Gd2 O3 , Sm2 O3 , Eu2 O3 , and CeO2 ) by using RE metal-organic frameworks to tune the ORR performance of the Pd sites through the Pd-REx Oy interface interaction. Taking Pd-Gd2 O3 /C as a representative, it is identified that the strong coupling between Pd and Gd2 O3 induces the formation of the Pd-O-Gd bridge, which triggers charge redistribution of Pd and Gd2 O3 . The screened Pd-Gd2 O3 /C exhibits impressive ORR performance with high onset potential (0.986 VRHE ), half-wave potential (0.877 VRHE ), and excellent stability. Similar ORR results are also found for Pd-Sm2 O3 /C, Pd-Eu2 O3 /C, and Pd-CeO2 /C catalysts. Theoretical analyses reveal that the coupling between Pd and Gd2 O3 promotes electron transfer through the Pd-O-Gd bridge, which induces the antibonding-orbital occupancy of Pd-*OH for the optimization of *OH adsorption in the rate-determining step of ORR. The pH-dependent microkinetic modeling shows that Pd-Gd2 O3 is close to the theoretical optimal activity for ORR, outperforming Pt under the same conditions. By its ascendancy in ORR, the Pd-Gd2 O3 /C exhibits superior performance in Zn-air battery as an air cathode, implying its excellent practicability.

Strong Metal-Support Interaction Facilitated Multicomponent Alloy Formation on Metal Oxide Support

Multicomponent alloy (MA) contains a nearly infinite number of unprecedented active sites through entropy stabilization, which is a desired platform for exploring high-performance catalysts. However, MA catalysts are usually synthesized under severe conditions, which induce support structure collapse and further deteriorate the synergy between MA and support. We propose that a strong metal-support interaction (SMSI) could facilitate the formation of MA by establishing a tunnel of oxygen vacancy for metal atom transport under low reduction temperature (400-600 °C), which exemplifies the holistic design of MA catalysts without deactivating supports. PtPdCoFe MA is readily synthesized on anatase TiO2 with the help of SMSI, which exhibits good catalytic activity and stability for methane combustion. This strategy demonstrates excellent universality on various supports and multicomponent alloy compositions. Our work not only reports a holistic synthesis strategy for MA synthesis by synergizing unique properties of reducible oxides and the mixing entropy of alloy but also offers a new insight that SMSI plays a vigorous role in the formation of alloy NPs on reducible oxides.

Fabrication of supported Pt/CeO2 nanocatalysts doped with different elements for CO oxidation: theoretical and experimental studies

Supported Pt/CeO₂ catalysts have been widely used in carbon monoxide (CO) oxidation; however, the high oxygen vacancy formation energy (E_vac) in the process leads to the poor performance of these catalysts. Herein, we explored different element (Pr, Cu, or N) doped CeO₂ supports using Ce-based metal-organic frameworks (MOFs) as precursors via calcination treatment. The obtained CeO₂ supports were used to load Pt nanoparticles. These catalysts were systematically characterized by various techniques, and they showed superior catalytic activity for CO oxidation compared to undoped catalysts which could be attributed to the formation of Ce³⁺, and high amounts of O_ads/(O_ads + O_lat) and Pt^δ+/Pt_total. Moreover, density functional theory calculations with on-site Coulomb interaction correction (DFT+U) were performed to provide atomic-scale insights into the reaction process by the Mars-van Krevelen (M-vK) mechanism, which revealed that the element-doped catalysts could simultaneously reduce the adsorption energies of CO and lower reaction energy barriers in the *OOCO associative pathway.

Synergy-Compensation Effect of Ferroelectric Polarization and Cationic Vacancy Collaboratively Promoting CO2 Photoreduction

Photocatalytic CO₂ reduction is severely limited by the rapid recombination of photo-generated charges and insufficient reactive sites. Creating electric field and defects are effective strategies to inhibit charge recombination and enrich catalytic sites, respectively. Herein, a coupled strategy of ferroelectric poling and cationic vacancy is developed to achieve high-performance CO₂ photoreduction on ferroelectric Bi₂ MoO₆ , and their interesting synergy-compensation relationship is first disclosed. Corona poling increases the remnant polarization of Bi₂ MoO₆ to enhance the intrinsic electric field for promoting charge separation, while it decreases the CO₂ adsorption. The introduced Mo vacancy (V_Mo ) facilitates the adsorption and activation of CO₂ , and surface charge separation by creating local electric field. Unfortunately, V_Mo largely reduces the remnant polarization intensity. Coupling poling and V_Mo not only integrate their advantages, resulting in an approximately sevenfold increased surface charge transfer efficiency, but also compensate for their shortcomings, for example, V_Mo largely alleviates the negative effects of ferroelectric poling on CO₂ adsorption. In the absence of co-catalyst or sacrificial agent, the poled Bi₂ MoO₆ with V_Mo exhibits a superior CO₂ -to-CO evolution rate of 19.75 µmol g^-1 h^-1 , ≈8.4 times higher than the Bi₂ MoO₆ nanosheets. This work provides new ideas for exploring the role of polarization and defects in photocatalysis.

Rational Synthesis and Regulation of Hollow Structural Materials for Electrocatalytic Nitrogen Reduction Reaction

The electrocatalytic nitrogen reduction reaction (NRR) is known as a promising mean of nitrogen fixation to mitigate the energy crisis and facilitate fertilizer production under mild circumstances. For electrocatalytic reactions, the design of efficient catalysts is conducive to reducing activation energy and accelerating lethargic dynamics. Among them, hollow structural materials possess cavities in their structures, which can slack off the escape rate of N2 and reaction intermediates, prolong the residence time of N2 , enrich the reaction intermediates' concentration, and shorten electron transportation path, thereby further enhancing their NRR activity. Here, the basic synthetic strategies of hollow structural materials are introduced first. Then, the recent breakthroughs in hollow structural materials as NRR catalysts are reviewed from the perspective of intrinsic, mesoscopic, and microscopic regulations, aiming to discuss how structures affect and improve the catalytic performance. Finally, the future research directions of hollow structural materials as NRR catalysts are discussed. This review is expected to provide an outlook for optimizing hollow structural NRR catalysts.

Exploring the Spatial Control of Topotactic Phase Transitions Using Vertically Oriented Epitaxial Interfaces

Engineering oxygen vacancy formation and distribution is a powerful route for controlling the oxygen sublattice evolution that affects diverse functional behavior. The controlling of the oxygen vacancy formation process is particularly important for inducing topotactic phase transitions that occur by transformation of the oxygen sublattice. Here we demonstrate an epitaxial nanocomposite approach for exploring the spatial control of topotactic phase transition from a pristine perovskite phase to an oxygen vacancy-ordered brownmillerite (BM) phase in a model oxide La_0.7Sr_0.3MnO₃ (LSMO). Incorporating a minority phase NiO in LSMO films creates ultrahigh density of vertically aligned epitaxial interfaces that strongly influence the oxygen vacancy formation and distribution in LSMO. Combined structural characterizations reveal strong interactions between NiO and LSMO across the epitaxial interfaces leading to a topotactic phase transition in LSMO accompanied by significant morphology evolution in NiO. Using the NiO nominal ratio as a single control parameter, we obtain intermediate topotactic nanostructures with distinct distribution of the transformed LSMO-BM phase, which enables systematic tuning of magnetic and electrical transport properties. The use of self-assembled heterostructure interfaces by the epitaxial nanocomposite platform enables more versatile design of topotactic phase structures and correlated functionalities that are sensitive to oxygen vacancies.

Probing Multiscale Disorder in Pyrochlore and Related Complex Oxides in the Transmission Electron Microscope: A Review

Transmission electron microscopy (TEM), and its counterpart, scanning TEM (STEM), are powerful materials characterization tools capable of probing crystal structure, composition, charge distribution, electronic structure, and bonding down to the atomic scale. Recent (S)TEM instrumentation developments such as electron beam aberration-correction as well as faster and more efficient signal detection systems have given rise to new and more powerful experimental methods, some of which (e.g., 4D-STEM, spectrum-imaging, in situ/operando (S)TEM)) facilitate the capture of high-dimensional datasets that contain spatially-resolved structural, spectroscopic, time- and/or stimulus-dependent information across the sub-angstrom to several micrometer length scale. Thus, through the variety of analysis methods available in the modern (S)TEM and its continual development towards high-dimensional data capture, it is well-suited to the challenge of characterizing isometric mixed-metal oxides such as pyrochlores, fluorites, and other complex oxides that reside on a continuum of chemical and spatial ordering. In this review, we present a suite of imaging and diffraction (S)TEM techniques that are uniquely suited to probe the many types, length-scales, and degrees of disorder in complex oxides, with a focus on disorder common to pyrochlores, fluorites and the expansive library of intermediate structures they may adopt. The application of these techniques to various complex oxides will be reviewed to demonstrate their capabilities and limitations in resolving the continuum of structural and chemical ordering in these systems.

Ionic Conductors: Effect of Temperature on Conductivity and Mechanical Properties and Their Interrelations

The ionic transport and the mechanical properties in solids are intimately related. However, few studies have been done to elucidate the background of that relation. With the objective to fill this gap and gain further understanding on the fundamental properties of ion conducting materials, we are studying systematically the mechanical properties of different materials. In the present study, after showing briefly our previous results obtained in crystalline materials, results regarding the relation between ionic conduction and mechanical properties in superionic glasses is presented. All these results indicate the intimate relation between the mechanical and ionic conduction. The results also indicate that the Grüneisen parameter and the Anderson–Grüneisen parameter of ionic conductors exhibit large temperature dependence and increase with temperature.

Progress of Exsolved Metal Nanoparticles on Oxides as High Performance (Electro)Catalysts for the Conversion of Small Molecules

Utilizing electricity and heat from renewable energy to convert small molecules into value-added chemicals through electro/thermal catalytic processes has enormous socioeconomic and environmental benefits. However, the lack of catalysts with high activity, good long-term stability, and low cost strongly inhibits the practical implementation of these processes. Oxides with exsolved metal nanoparticles have recently been emerging as promising catalysts with outstanding activity and stability for the conversion of small molecules, which provides new possibilities for application of the processes. In this review, it starts with an introduction on the mechanism of exsolution, discussing representative exsolution materials, the impacts of intrinsic material properties and external environmental conditions on the exsolution behavior, and the driving forces for exsolution. The performances of exsolution materials in various reactions, such as alkane reforming reaction, carbon monoxide oxidation, carbon dioxide utilization, high temperature steam electrolysis, and low temperature electrocatalysis, are then summarized. Finally, the challenges and future perspectives for the development of exsolution materials as high-performance catalysts are discussed.

Advances in Materials Design for All-Solid-state Batteries: From Bulk to Thin Films

All-solid-state batteries (SSBs) are one of the most fascinating next-generation energy storage systems that can provide improved energy density and safety for a wide range of applications from portable electronics to electric vehicles. The development of SSBs was accelerated by the discovery of new materials and the design of nanostructures. In particular, advances in the growth of thin-film battery materials facilitated the development of all solid-state thin-film batteries (SSTFBs)—expanding their applications to microelectronics such as flexible devices and implantable medical devices. However, critical challenges still remain, such as low ionic conductivity of solid electrolytes, interfacial instability and difficulty in controlling thin-film growth. In this review, we discuss the evolution of electrode and electrolyte materials for lithium-based batteries and their adoption in SSBs and SSTFBs. We highlight novel design strategies of bulk and thin-film materials to solve the issues in lithium-based batteries. We also focus on the important advances in thin-film electrodes, electrolytes and interfacial layers with the aim of providing insight into the future design of batteries. Furthermore, various thin-film fabrication techniques are also covered in this review.