Pseudo-magnetic field-induced slow carrier dynamics in periodically strained graphene

Nanocarbon-based sensors for the structural health monitoring of smart biocomposites

Structural health monitoring (SHM) is a critical aspect of ensuring the safety and durability of smart biocomposite materials used as multifunctional materials. Smart biocomposites are composed of renewable or biodegradable materials and have emerged as eco-friendly alternatives of traditional non-biodegradable glass fiber-based composite materials. Although biocomposites exhibit fascinating properties and many desirable traits, real-time and early stage SHM is the most challenging issue to enable their long-term use. Smart biocomposites are integrated with sensors for in situ identification of the progress of damage and composite failure. The sensitivity of such smart biocomposites is a key functionality, which can be tuned by the introduction of an appropriate filler. In particular, nanocarbons hold promising potential to be incorporated in SHM applications of biocomposites. This review focused on the potential applications of nanocarbons in SHM of biocomposites. The aspects related to fabrication techniques and working mechanism of sensors are comprehensively discussed. Furthermore, their unique mechanical and electrical properties and sustainable nature ensure seamless integration into biocomposites, allowing for real-time monitoring without compromising the material's properties. These sensors offer multi-parameter sensing capabilities, such as strain, pressure, humidity, temperature, and chemical exposure, allowing a comprehensive assessment of biocomposite health. Additionally, their durability and longevity in harsh conditions, along with wireless connectivity options, provide cost-effective and sustainable SHM solutions. As research in this field advances, ongoing efforts seek to enhance the sensitivity and selectivity of these sensors, optimizing their performance for real-world applications. This review highlights the significant advances, ongoing efforts to enhance the sensitivity and selectivity, and performance optimization of nanocarbon-based sensors along with their working mechanism in the field of SHM for smart biocomposites. The key challenges and future research perspectives facing the conversion of nanocarbons to smart biocomposites are also displayed.

In Situ Nanomechanics: Opportunities Based on Superplastic Nanomolding

In situ nanomechanics, referring to the real-time monitoring of nanomechanical deformation during quantitative mechanical testing, is a key technology for understanding the physical and mechanical properties of nanoscale materials. This perspective reviews the progress of in situ nanomechanics from the aspects of preparation and testing of nanosamples, with a major focus on one-dimensional (1D) nanostructures and discussions of their challenges. We highlight the opportunities provided by in situ nanomechanics combined with the superplastic nanomolding technique, especially in the aspects of regulating physical and chemical properties which are highly exploitable for mechanoelectronics, mechanoluminescence, piezoelectronics, piezomagnetism, piezothermography, and mechanochemistry.

Electric Field Effects on Curved Graphene Quantum Dots

The recent and continuous research on graphene-based systems has opened their usage to a wide range of applications due to their exotic properties. In this paper, we have studied the effects of an electric field on curved graphene nanoflakes, employing the Density Functional Theory. Both mechanical and electronic analyses of the system have been made through its curvature energy, dipolar moment, and quantum regeneration times, with the intensity and direction of a perpendicular electric field and flake curvature as parameters. A stabilisation of non-planar geometries has been observed, as well as opposite behaviours for both classical and revival times with respect to the direction of the external field. Our results show that it is possible to modify regeneration times using curvature and electric fields at the same time. This fine control in regeneration times could allow for the study of new phenomena on graphene.

Roses in the nonperturbative current response of artificial crystals

In two-dimensional artificial crystals with large real-space periodicity, the nonlinear current response to a large applied electric field can feature a strong angular dependence, which encodes information about the band dispersion and Berry curvature of isolated electronic Bloch minibands. Within the relaxation-time approximation, we obtain analytic expressions up to infinite order in the driving field for the current in a band-projected theory with time-reversal and trigonal symmetry. For a fixed field strength, the dependence of the current on the direction of the applied field is given by rose curves whose petal structure is symmetry constrained and is obtained from an expansion in real-space translation vectors. We illustrate our theory with calculations on periodically buckled graphene and twisted double bilayer graphene, wherein the discussed physics can be accessed at experimentally relevant field strengths.

Massive laser pulling of graphene nanosheets in water

Light manipulation of graphene-based materials attracts much attentions. As a new light manipulation concept, optical pulling develops rapidly in the past decade. However, optical pulling of graphene in liquid is rarely reported. In this work, laser pulling of graphene nanosheets (GN) in pure water by using common gauss beams is presented. This phenomenon holds for multiple incident laser wavelengths including 405 nm, 488 nm, 532 nm and 650 nm. A particle image velocimetry software PIVlab is adopted to analyze the velocity field information of GN. The laser pulling velocity of the GN is approximately ∼ 0.5 mm/s corresponding to ∼ 103 body length/s, which increases with an increase of the incident laser energy. This work presents a contactless mothed to massively pull microscale graphene materials in simple liquid, which supplies a potential manipulation technique for micro-nanofluidic devices and also provides a platform to investigate laser-graphene interaction in a simple liquid phase medium.

Engineering the Strain and Interlayer Excitons of 2D Materials via Lithographically Engraved Hexagonal Boron Nitride

Strain engineering has quickly emerged as a viable option to modify the electronic, optical, and magnetic properties of 2D materials. However, it remains challenging to arbitrarily control the strain. Here we show that, by creating atomically flat surface nanostructures in hexagonal boron nitride, we achieve an arbitrary on-chip control of both the strain distribution and magnitude on high-quality molybdenum disulfide. The phonon and exciton emissions are shown to vary in accordance with our strain field designs, enabling us to write and draw any photoluminescence color image in a single chip. Moreover, our strain engineering offers a powerful means to significantly and controllably alter the strengths and energies of interlayer excitons at room temperature. This method can be easily extended to other material systems and offers promise for functional excitonic devices.

Strong second-harmonic generation by sublattice polarization in non-uniformly strained monolayer graphene

Despite the potential of graphene for building a variety of quantum photonic devices, its centrosymmetric nature forbids the observation of second harmonic generation (SHG) for developing second-order nonlinear devices. To activate SHG in graphene, extensive research efforts have been directed towards disrupting graphene's inversion symmetry using external stimuli like electric fields. However, these methods fail to engineer graphene's lattice symmetry, which is the root cause of the forbidden SHG. Here, we harness strain engineering to directly manipulate graphene's lattice arrangement and induce sublattice polarization to activate SHG. Surprisingly, the SHG signal is boosted 50-fold at low temperatures, which can be explained by resonant transitions between strain-induced pseudo-Landau levels. The second-order susceptibility of strained graphene is found to be larger than that of hexagonal boron nitride with intrinsic broken inversion symmetry. Our demonstration of strong SHG in strained graphene offers promising possibilities for developing high-efficiency nonlinear devices for integrated quantum circuits.

Giant Periodic Pseudomagnetic Fields in Strained Kagome Magnet FeSn Epitaxial Films on SrTiO3(111) Substrate

Quantum materials, particularly Dirac materials with linearly dispersing bands, can be effectively tuned by strain-induced lattice distortions leading to a pseudomagnetic field that strongly modulates their electronic properties. Here, we grow kagome magnet FeSn films, consisting of alternatingly stacked Sn₂ honeycomb (stanene) and Fe₃Sn kagome layers, on SrTiO₃(111) substrates by molecular beam epitaxy. Using scanning tunneling microscopy/spectroscopy, we show that the Sn honeycomb layer can be periodically deformed by epitaxial strain for a film thickness below 10 nm, resulting in differential conductance peaks consistent with Landau levels generated by a pseudomagnetic field greater than 1000 T. Our findings demonstrate the feasibility of strain engineering the electronic properties of topological magnets at the nanoscale.

Surface acoustic wave induced phenomena in two-dimensional materials

Surface acoustic wave (SAW)-matter interaction provides a fascinating key for inducing and manipulating novel phenomena and functionalities in two-dimensional (2D) materials. The dynamic strain field and piezo-electric field associated with propagating SAWs determine the coherent manipulation and transduction between 2D excitons and phonons. Over the past decade, many intriguing acoustic-induced effects, including the acousto-electric effect, acousto-galvanic effect, acoustic Stark effect, acoustic Hall effect and acoustic exciton transport, have been reported experimentally. However, many more phenomena, such as the valley acousto-electric effect, valley acousto-electric Hall effect and acoustic spin Hall effect, were only theoretically proposed, the experimental verification of which are yet to be achieved. In this minireview, we attempt to overview the recent breakthrough of SAW-induced phenomena covering acoustic charge transport, acoustic exciton transport and modulation, and coherent acoustic phonons. Perspectives on the opportunities of the proposed SAW-induced phenomena, as well as open experimental challenges, are also discussed, attempting to offer some guidelines for experimentalists and theorists to explore the desired exotic properties and boost practical applications of 2D materials.

Gaussian Curvature Effects on Graphene Quantum Dots

In the last few years, much attention has been paid to the exotic properties that graphene nanostructures exhibit, especially those emerging upon deforming the material. Here we present a study of the mechanical and electronic properties of bent hexagonal graphene quantum dots employing density functional theory. We explore three different kinds of surfaces with Gaussian curvature exhibiting different shapes-spherical, cylindrical, and one-sheet hyperboloid-used to bend the material, and several boundary conditions regarding what atoms are forced to lay on the chosen surface. In each case, we study the curvature energy and two quantum regeneration times (classic and revival) for different values of the curvature radius. A strong correlation between Gaussian curvature and these regeneration times is found, and a special divergence is observed for the revival time for the hyperboloid case, probably related to the pseudo-magnetic field generated by this curvature being capable of causing a phase transition.

Chiral Transport of Hot Carriers in Graphene in the Quantum Hall Regime

Photocurrent (PC) measurements can reveal the relaxation dynamics of photoexcited hot carriers beyond the linear response of conventional transport experiments, a regime important for carrier multiplication. Here, we study the relaxation of carriers in graphene in the quantum Hall regime by accurately measuring the PC signal and modeling the data using optical Bloch equations. Our results lead to a unified understanding of the relaxation processes in graphene over different magnetic field strength regimes, which is governed by the interplay of Coulomb interactions and interactions with acoustic and optical phonons. Our data provide clear indications of a sizable carrier multiplication. Moreover, the oscillation pattern and the saturation behavior of PC are manifestations of not only the chiral transport properties of carriers in the quantum Hall regime but also the chirality change at the Dirac point, a characteristic feature of a relativistic quantum Hall effect.

Strain engineering of graphene on rigid substrates

Graphene with a large tensile strain is a promising candidate for the new "straintronics'' applications. The current approaches of strain engineering on graphene are mainly realized by flexible or hollow substrates. In this work, a novel method for strained graphene on a rigid substrate assisted by PDMS stretching and interface adjustments is proposed. The Raman spectra show that the maximum strain of graphene on the SiO₂/Si substrate is ∼1.5%, and multiple characterizations demonstrate its high cleanness, flatness, integrity, and reliable electrical performance. The successful strain engineering is attributed to the protection of a layer of formvar resin and the interfacial capillary force of the buffering liquid. We believe this technique can advance strain-related fundamental studies and applications of two-dimensional materials.

Realizing One-Dimensional Electronic States in Graphene via Coupled Zeroth Pseudo-Landau Levels

Strain-induced pseudomagnetic fields can mimic real magnetic fields to generate a zero-magnetic-field analog of the Landau levels (LLs), i.e., the pseudo-Landau levels (PLLs), in graphene. The distinct nature of the PLLs enables one to realize novel electronic states beyond what is feasible with real LLs. Here, we show that it is possible to realize exotic electronic states through the coupling of zeroth PLLs in strained graphene. In our experiment, nanoscale strained structures embedded with PLLs are generated along a one-dimensional (1D) channel of suspended graphene monolayer. Our results demonstrate that the zeroth PLLs of the strained structures are coupled together, exhibiting a serpentine pattern that snakes back and forth along the 1D suspended graphene monolayer. These results are verified theoretically by large-scale tight-binding calculations of the strained samples. Our result provides a new approach to realizing novel quantum states and to engineering the electronic properties of graphene by using localized PLLs as building blocks.

Deep Elastic Strain Engineering of 2D Materials and Their Twisted Bilayers

Conventionally, tuning materials' properties can be done through strategies such as alloying, doping, defect engineering, and phase engineering, while in fact mechanical straining can be another effective approach. In particular, elastic strain engineering (ESE), unlike conventional strain engineering mainly based on epitaxial growth, allows for continuous and reversible modulation of material properties by mechanical loading/unloading. The exceptional intrinsic mechanical properties (including elasticity and strength) of two-dimensional (2D) materials make them naturally attractive candidates for potential ESE applications. Here, we demonstrated that using the strain effect to modulate the physical and chemical properties toward novel functional device applications, which could be a general strategy for various 2D materials and their heterostructures. We then show how ultralarge, uniform elastic strain in free-standing 2D monolayers can permit deep elastic strain engineering (DESE), which can result in fundamentally changed electronic and optoelectronic properties for unconventional device applications. In addition to monolayers and van der Waals (vdW) heterostructures, we propose that DESE can be also applied to twisted bilayer graphene and other emerging twisted vdW structures, allowing for unprecedented functional 2D material applications.

Heterostrain-enabled dynamically tunable moiré superlattice in twisted bilayer graphene

The ability to precisely control moiré patterns in two-dimensional materials has enabled the realization of unprecedented physical phenomena including Mott insulators, unconventional superconductivity, and quantum emission. Along with the twist angle, the application of independent strain in each layer of stacked two-dimensional materials-termed heterostrain-has become a powerful means to manipulate the moiré potential landscapes. Recent experimental studies have demonstrated the possibility of continuously tuning the twist angle and the resulting physical properties. However, the dynamic control of heterostrain that allows the on-demand manipulation of moiré superlattices has yet to be experimentally realized. Here, by harnessing the weak interlayer van der Waals bonding in twisted bilayer graphene devices, we demonstrate the realization of dynamically tunable heterostrain of up to 1.3%. Polarization-resolved Raman spectroscopy confirmed the existence of substantial heterostrain by presenting triple G peaks arising from the independently strained graphene layers. Theoretical calculations revealed that the distorted moiré patterns via heterostrain can significantly alter the electronic structure of twisted bilayer graphene, allowing the emergence of multiple absorption peaks ranging from near-infrared to visible spectral ranges. Our experimental demonstration presents a new degree of freedom towards the dynamic modulation of moiré superlattices, holding the promise to unveil unprecedented physics and applications of stacked two-dimensional materials.