Photobleaching in STED nanoscopy and its dependence on the photon flux applied for reversible silencing of the fluorophore

STED Imaging of Vesicular Endocytosis in the Synapse

Endocytosis is a fundamental biological process that couples exocytosis to maintain the homeostasis of the plasma membrane and sustained neurotransmission. Super-resolution microscopy enables optical imaging of exocytosis and endocytosis in live cells and makes an essential contribution to understanding molecular mechanisms of endocytosis in neuronal somata and other types of cells. However, visualization of exo-endocytic events at the single vesicular level in a synapse with optical imaging remains a great challenge to reveal mechanisms governing the synaptic exo-endocytotic coupling. In this protocol, we describe the technical details of stimulated emission depletion (STED) imaging of synaptic endocytosis at the single-vesicle level, from sample preparation and microscopy calibration to data acquisition and analysis.

Bleaching protection and axial sectioning in fluorescence nanoscopy through two-photon activation at 515 nm

Activation of caged fluorophores in microscopy has mostly relied on the absorption of a single ultraviolet (UV) photon of ≲400 nm wavelength or on the simultaneous absorption of two near-infrared (NIR) photons >700 nm. Here, we show that two green photons (515 nm) can substitute for a single photon (~260 nm) to activate popular silicon-rhodamine (Si-R) dyes. Activation in the green range eliminates the chromatic aberrations that plague activation by UV or NIR light. Thus, in confocal fluorescence microscopy, the activation focal volume can be matched with that of confocal detection. Besides, detrimental losses of UV and NIR light in the optical system are avoided. We apply two-photon activation (2PA) of three Si-R dyes in different superresolution approaches. STED microscopy of thick samples is improved through optical sectioning and photobleaching reduced by confining active fluorophores to a thin layer. 2PA of individualized fluorophores enables MINSTED nanoscopy with nanometer-resolution.

OpenSTED: open-source dynamic intensity minimum system for stimulated emission depletion microscopy

Significance

Stimulated emission depletion (STED) is a powerful super-resolution microscopy technique that can be used for imaging live cells. However, the high STED laser powers can cause significant photobleaching and sample damage in sensitive biological samples. The dynamic intensity minimum (DyMIN) technique turns on the STED laser only in regions of the sample where there is fluorescence signal, thus saving significant sample photobleaching. The reduction in photobleaching allows higher resolution images to be obtained and longer time-lapse imaging of live samples. A stand-alone module to perform DyMIN is not available commercially.

Aim

In this work, we developed an open-source design to implement three-step DyMIN on a STED microscope and demonstrated reduced photobleaching for timelapse imaging of beads, cells, and tissue.

Approach

The DyMIN system uses a fast multiplexer circuit and inexpensive field-programmable gate array controlled by Labview software that operates as a stand-alone module for a STED microscope. All software and circuit diagrams are freely available.

Results

We compared time-lapse images of bead samples using our custom DyMIN system to conventional STED and recorded a ∼ 46 % higher signal when using DyMIN after a 50-image sequence. We further demonstrated the DyMIN system for time-lapse STED imaging of live cells and brain tissue slices.

Conclusions

Our open-source DyMIN system is an inexpensive add-on to a conventional STED microscope that can reduce photobleaching. The system can significantly improve signal to noise for dynamic time-lapse STED imaging of live samples.

Potential Biomedical Applications of Terbium-Based Nanoparticles (TbNPs): A Review on Recent Advancement

The scientific world is increasingly focusing on rare earth metal oxide nanomaterials due to their consequential biological prospects, navigated by breakthroughs in biomedical applications. Terbium belongs to rare earth elements (lanthanide series) and possesses remarkably strong luminescence at lower energy emission and signal transduction properties, ushering in wide applications for diagnostic measurements (i.e., bioimaging, biosensors, fluorescence imaging, etc.) in the biomedical sectors. In addition, the theranostic applications of terbium-based nanoparticles further permit the targeted delivery of drugs to the specific site of the disease. Furthermore, the antimicrobial properties of terbium nanoparticles induced via reactive oxygen species (ROS) cause oxidative damage to the cell membrane and nuclei of living organisms, ion release, and surface charge interaction, thus further creating or exhibiting excellent antioxidant characteristics. Moreover, the recent applications of terbium nanoparticles in tissue engineering, wound healing, anticancer activity, etc., due to angiogenesis, cell proliferation, promotion of growth factors, biocompatibility, cytotoxicity mitigation, and anti-inflammatory potentials, make this nanoparticle anticipate a future epoch of nanomaterials. Terbium nanoparticles stand as a game changer in the realm of biomedical research, proffering a wide array of possibilities, from revolutionary imaging techniques to advanced drug delivery systems. Their unique properties, including luminescence, magnetic characteristics, and biocompatibility, have redefined the boundaries of what can be achieved in biomedicine. This review primarily delves into various mechanisms involved in biomedical applications via terbium-based nanoparticles due to their physicochemical characteristics. This review article further explains the potential biomedical applications of terbium nanoparticles with in-depth significant mechanisms from the individual literature. This review additionally stands as the first instance to furnish a "single-platted" comprehensive acquaintance of terbium nanoparticles in shaping the future of healthcare as well as potential limitations and overcoming strategies that require exploration before being trialed in clinical settings.

MINFLUX nanoscopy: Visualising biological matter at the nanoscale level

Since its introduction in 2017, MINFLUX nanoscopy has shown that it can visualise fluorescent molecules with an exceptional localisation precision of a few nanometres. In this overview, we provide a brief insight into technical implementations, fluorescent marker developments and biological studies that have been conducted in connection with MINFLUX imaging and tracking. We also formulate ideas on how MINFLUX nanoscopy and derived technologies could influence bioimaging in the future. This insight is intended as a general starting point for an audience looking for a brief overview of MINFLUX nanoscopy from theory to application.

Nanosecond pulsed deep-red Raman laser based on the Nd:YLF dual-crystal configuration

A highly powerful nanosecond pulsed deep-red laser was demonstrated by intracavity second-harmonic generation of an actively Q-switched Nd:YLF dual-crystal-based KGW Raman laser in a critically phase-matched lithium triborate (LBO) crystal. The first-Stokes fields at 1461 and 1490 nm driven by the 1314 nm fundamental laser were firstly produced by accessing the Raman shifts of 768 and 901 cm-1 in the KGW crystal, respectively, and thereafter converted to the deep-red emission lines at 731 and 745 nm by finely tuning the phase-matching angle of the LBO crystal and carefully realigning the resonator. Integrating the benefits of the Nd:YLF dual-crystal configuration and the meticulously designed L-shaped resonator, this deep-red laser system delivered the maximum average output powers of 5.2 and 7.6 W with the optical power conversion efficiencies approaching 6.3% and 9.2% under the optimal pulse repetition frequency of 4 kHz, respectively. The pulse durations of 6.7 and 5.5 ns were acquired with the peak powers up to approximately 190 and 350 kW, respectively, and the resultant beam qualities were determined to be near-diffraction-limited with M2 ≈ 1.5.

Simultaneously enhancing the resolution and signal-to-background ratio in STED optical nanoscopy via differential depletion

STED (stimulated emission depletion) far-field optical nanoscopy achieves resolution beyond the diffraction limit by depleting fluorescence at the periphery of excitation with a donut-shaped depletion laser. What is traded off with the superior resolution of STED nanoscopy is the unwanted elevation of structured background noise which hampers the quality of STED images. Here, we alleviate the background noise problem by adopting the differential stimulated emission depletion (diffSTED) approach. In diffSTED nanoscopy, signals obtained with different depletion strengths are compared and properly subtracted to remove two major background noise sources in STED nanoscopy. We show via simulations that by using diffSTED nanoscopy, background noise is significantly decreased, and the image contrast is improved. In addition, we show by simulation and analytical calculation that diffSTED improves resolution simultaneously. We assess the effect of different parameters, such as the STED beam intensity, depletion intensity ratio of two STED beams, and the subtraction factor, on the signal-to-background ratio (SBR) and the resolution of diffSTED nanoscopy. We introduce a logical algorithm to determine the optimal subtraction factor and the depletion intensity ratio. DiffSTED nanoscopy is a versatile technique that can be readily applied to any STED system without requiring any hardware modifications. We predict the wide applicability of diffSTED for its enhanced resolution, improved SBR, and easiness of implementation.

Population Control of Upconversion Energy Transfer for Stimulation Emission Depletion Nanoscopy

Upconverting stimulated emission depletion microscopy (U-STED) is emerging as an effective approach for super-resolution imaging due to its significantly low depletion power and its ability to surpass the limitations of the square-root law and achieve higher resolution. Though the compelling performance, a trade-off between the spatial resolution and imaging quality in U-STED has been recognized in restricting the usability due to the low excitation power drove high depletion efficiency. Moreover, it is a burden to search for the right power relying on trial and error as the underpinning mechanism is unknown. Here, a method is proposed that can easily predict the ideal excitation power for high depletion efficiency with the assistance of the non-saturate excitation based on the dynamic cross-relaxation (CR) energy transfer of upconversion nanoparticles. This allows the authors to employ the rate equation model to simulate the populations of each relevant energy state of lanthanides and predict the ideal excitation power for high depletion efficiency. The authors demonstrate that the resolution of STED with the assistance of nonsaturated confocal super-resolution results can easily achieve the highest resolution of sub-40 nm, 1/24^th of the excitation wavelengths. The finding on the CR effect provides opportunities for population control in realizing low-power high-resolution nanoscopy.

Event-triggered STED imaging

Monitoring the proteins and lipids that mediate all cellular processes requires imaging methods with increased spatial and temporal resolution. STED (stimulated emission depletion) nanoscopy enables fast imaging of nanoscale structures in living cells but is limited by photobleaching. Here, we present event-triggered STED, an automated multiscale method capable of rapidly initiating two-dimensional (2D) and 3D STED imaging after detecting cellular events such as protein recruitment, vesicle trafficking and second messengers activity using biosensors. STED is applied in the vicinity of detected events to maximize the temporal resolution. We imaged synaptic vesicle dynamics at up to 24 Hz, 40 ms after local calcium activity; endocytosis and exocytosis events at up to 11 Hz, 40 ms after local protein recruitment or pH changes; and the interaction between endosomal vesicles at up to 3 Hz, 70 ms after approaching one another. Event-triggered STED extends the capabilities of live nanoscale imaging, enabling novel biological observations in real time.

Single-Particle Resolution Fluorescence Microscopy of Nanoplastics

Understanding of nanoplastic prevalence and toxicology is limited by imaging challenges resulting from their small size. Fluorescence microscopy is widely applied to track and identify microplastics in laboratory studies and environmental samples. However, conventional fluorescence microscopy, due to diffraction, lacks the resolution to precisely localize nanoplastics in tissues, distinguish them from free dye, or quantify them in environmental samples. To address these limitations, we developed techniques to label nanoplastics for imaging with stimulated emission depletion (STED) microscopy to achieve resolution at an order of magnitude superior to conventional fluorescence microscopy. These techniques include (1) passive sorption; (2) swell incorporation; and (3) covalent coupling of STED-compatible fluorescence dyes to nanoplastics. We demonstrate that our labeling techniques, combined with STED microscopy, can be used to resolve nanoplastics of different shapes and compositions as small as 50 nm. The longevity of dye labeling is demonstrated in different media and conditions of biological and environmental relevance. We also test STED imaging of nanoplastics in exposure experiments with the model worm Caenorhabditis elegans. Our work shows the value of the method for detection and localization of nanoplastics as small as 50 nm in a whole animal without disruption of the tissue. These techniques will allow more precise localization and quantification of nanoplastics in complex matrices such as biological tissues in exposure studies.

Use of nanosecond excitation pulses in fluorescence lifetime measurement via phasor analysis

We investigated the possibility of using long excitation pulses in fluorescence lifetime imaging microscopy (FLIM) using phasor analysis. It has long been believed that the pulse width of an excitation laser must be shorter than the lifetime of a fluorophore in a time-domain FLIM system. Even though phasor analysis can effectively minimize the pulse effect by using deconvolution, the precision of a measured lifetime can be degraded seriously. Here, we provide a fundamental theory on pulse-width-dependent measurement precisions in lifetime measurement in the phasor plane. Our theory predicts that high-precision lifetimes can be obtained even with a laser whose pulse width is four times larger than the lifetime of a fluorophore. We have experimentally demonstrated this by measuring the lifetimes of fluorescence probes with 2.57 ns and 3.75 ns lifetimes by using various pulse widths (0.52-38 ns) and modulation frequencies (10-200 MHz). We believe our results open a new possibility of using long pulse-width lasers for high-precision FLIM.

Bleaching-Resistant Super-Resolution Fluorescence Microscopy

Photobleaching is the permanent loss of fluorescence after extended exposure to light and is a major limiting factor in super-resolution microscopy (SRM) that restricts spatiotemporal resolution and observation time. Strategies for preventing or overcoming photobleaching in SRM are reviewed developing new probes and chemical environments. Photostabilization strategies are introduced first, which are borrowed from conventional fluorescence microscopy, that are employed in SRM. SRM-specific strategies are then highlighted that exploit the on-off transitions of fluorescence, which is the key mechanism for achieving super-resolution, which are becoming new routes to address photobleaching in SRM. Off states can serve as a shelter from excitation by light or an exit to release a damaged probe and replace it with a fresh one. Such efforts in overcoming the photobleaching limits are anticipated to enhance resolution to molecular scales and to extend the observation time to physiological lifespans.

Sample Preparation for Multicolor STED Microscopy

Stimulated emission depletion (STED) microscopy is one of the optical superresolution microscopy (SRM) techniques, more recently also referred to as nanoscopy, that have risen to popularity among biologists during the past decade. These techniques keep pushing the physical boundaries of optical resolution toward the molecular scale. Thereby, they enable biologists to image cellular and tissue structures at a level of almost molecular detail that was previously only achievable using electron microscopy. All the while, they retain the advantages of light microscopy, in particular with regards to sample preparation and flexibility of imaging. Commercially available SRM setups have become more and more available and also increasingly sophisticated, both in terms of optical performance and, importantly, ease of use. Institutional microscopy core facilities now offer widespread access to this type of systems. However, the field has grown so rapidly, and keeps growing, that biologists can be easily overwhelmed by the multitude of available techniques and approaches. From this vast array of SRM modalities, STED stands out in one respect: it is essentially an extension to an advanced confocal microscope. Most experienced users of confocal microscopy will find the transition to STED microscopy relatively easy as compared with some other SRM techniques. This also applies to STED sample preparation. Nonetheless, because resolution in STED microscopy does not only depend on the wavelength of the incident light and the numerical aperture of the objective, but crucially also on the square root of the intensity of the depletion laser and, in general, on the photochemical interaction of the fluorophore with the depletion laser, some additional considerations are necessary in STED sample preparation. Here we describe the single color staining of the somatostatin receptor subtype 2A (SSTR2A) and dual color staining of the trans-Golgi-network protein TGN 38 and the t-SNARE syntaxin-6 for STED in the endocrine cell line AtT20 and STED imaging of the samples, providing the protocols in as general a form as possible. The protocols in this chapter are used in this way in an institutional microscopy core facility.

Long-term STED imaging of membrane packing and dynamics by exchangeable polarity-sensitive dyes

Understanding the plasma membrane nanoscale organization and dynamics in living cells requires microscopy techniques with high spatial and temporal resolution that permit for long acquisition times and allow for the quantification of membrane biophysical properties, such as lipid ordering. Among the most popular super-resolution techniques, stimulated emission depletion (STED) microscopy offers one of the highest temporal resolutions, ultimately defined by the scanning speed. However, monitoring live processes using STED microscopy is significantly limited by photobleaching, which recently has been circumvented by exchangeable membrane dyes that only temporarily reside in the membrane. Here, we show that NR4A, a polarity-sensitive exchangeable plasma membrane probe based on Nile red, permits the super-resolved quantification of membrane biophysical parameters in real time with high temporal and spatial resolution as well as long acquisition times. The potential of this polarity-sensitive exchangeable dye is showcased by live-cell real-time three-dimensional STED recordings of bleb formation and lipid exchange during membrane fusion as well as by STED-fluorescence correlation spectroscopy experiments for the simultaneous quantification of membrane dynamics and lipid packing that correlate in model and live-cell membranes.

Super-Resolution Fluorescence Microscopy Methods for Assessing Mouse Biology

Super-resolution (diffraction unlimited) microscopy was developed 15 years ago; the developers were awarded the Nobel Prize in Chemistry in recognition of their work in 2014. Super-resolution microscopy is increasingly being applied to diverse scientific fields, from single molecules to cell organelles, viruses, bacteria, plants, and animals, especially the mammalian model organism Mus musculus. In this review, we explain how super-resolution microscopy, along with fluorescence microscopy from which it grew, has aided the renaissance of the light microscope. We cover experiment planning and specimen preparation and explain structured illumination microscopy, super-resolution radial fluctuations, stimulated emission depletion microscopy, single-molecule localization microscopy, and super-resolution imaging by pixel reassignment. The final section of this review discusses the strengths and weaknesses of each super-resolution technique and how to choose the best approach for your research. © 2021 The Authors. Current Protocols published by Wiley Periodicals LLC.

Single Photon Avalanche Diode Arrays for Time-Resolved Raman Spectroscopy

The detection of peaks shifts in Raman spectroscopy enables a fingerprint reconstruction to discriminate among molecules with neither labelling nor sample preparation. Time-resolved Raman spectroscopy is an effective technique to reject the strong fluorescence background that profits from the time scale difference in the two responses: Raman photons are scattered almost instantaneously while fluorescence shows a nanoseconds time constant decay. The combination of short laser pulses with time-gated detectors enables the collection of only those photons synchronous with the pulse, thus rejecting fluorescent ones. This review addresses time-gating issues from the sensor standpoint and identifies single photon avalanche diode (SPAD) arrays as the most suitable single-photon detectors to be rapidly and precisely time-gated without bulky, complex, or expensive setups. At first, we discuss the requirements for ideal Raman SPAD arrays, particularly focusing on the design guidelines for optimized on-chip processing electronics. Then we present some existing SPAD-based architectures, featuring specific operation modes which can be usefully exploited for Raman spectroscopy. Finally, we highlight key aspects for future ultrafast Raman platforms and highly integrated sensors capable of undistorted identification of Raman peaks across many pixels.

Organic Nanoparticles-Assisted Low-Power STED Nanoscopy

Stimulated emission depletion (STED) nanoscopy plays a key role in achieving sub-50 nm high spatial resolution for subcellular live-cell imaging. To avoid re-excitation, the STED wavelength has to be tuned at the red tail of the emission spectrum of fluorescent probes, leading to high depletion laser power that might damage the cell viability and functionality. Herein, with the highly emissive silica-coated core-shell organic nanoparticles (CSONPs) enabling a giant Stokes shift of 150 nm, ultralow power STED is achieved by shifting the STED wavelength to the emission maximum at 660 nm. The stimulated emission cross section is increased by ∼20-fold compared to that at the emission red tail. The measured saturation intensity and lateral resolution of our CSONP are 0.0085 MW cm^-2 and 25 nm, respectively. More importantly, long-term (>3 min) dynamic super-resolution imaging of the lysosomal fusion-fission processes in living cells is performed with a resolution of 37 nm.

Stimulated Emission Depletion Spectroscopy of Color Centers in Hexagonal Boron Nitride

We demonstrate the use of Stimulated Emission Depletion (STED) spectroscopy to map the electron-optical-phonon sideband of the ground state of the radiative transition of color centers in hexagonal boron nitride emitting at 2.0-2.2 eV, with in-plane linear polarization. The measurements are compared to photoluminescence of excitation (PLE) spectra that maps the electron-optical-phonon sideband of the excited state. The main qualitative difference is a red-shift in the longitudinal optical phonon peak associated with E _1u symmetry at the zone center. We compare our results to theoretical work on different defect species in hBN and find they are consistent with a carbon-based defect.

Cumulative effects of photobleaching in volumetric STED imaging-artefacts and possible benefits

In stimulated emission depletion (STED) imaging, the excitation and depletion laser beams extend well beyond the focal plane in the imaged sample. We investigated how photobleaching resulting from this irradiation can affect STED images, by acquiring 3D images of fluorescent polystyrene beads using a 2D STED microscope, and applying different Z pixel sizes, scanning speeds, resulting in different laser light doses. While higher STED beam irradiances can increase the spatial resolution, they can also significantly increase photobleaching and thereby reduce signal-to-background levels. In 2D STED imaging, based on a single scan within the focal plane, scan parameters can often be selected to avoid photobleaching effects. Upon 3D optical sectioning experiments however, using the same scan parameters, additional cumulative effects of photobleaching may appear, due to the extension of the excitation and depletion laser beams beyond the focal planes being scanned. Apart from a reduction in signal-to-background levels, such photobleaching can lead to an apparent shift of the axial localization of the objects in the images, but also to an increased resolution in the axial dimension. These findings, confirmed by simulations based on a simplified model for photobleaching, suggests some caution in volumetric STED imaging experiments, but also a possibility for enhanced axial resolution in such experiments.

Two-color nanoscopy of organelles for extended times with HIDE probes

Performing multi-color nanoscopy for extended times is challenging due to the rapid photobleaching rate of most fluorophores. Here we describe a new fluorophore (Yale-595) and a bio-orthogonal labeling strategy that enables two-color super-resolution (STED) and 3D confocal imaging of two organelles simultaneously for extended times using high-density environmentally sensitive (HIDE) probes. Because HIDE probes are small, cell-permeant molecules, they can visualize dual organelle dynamics in hard-to-transfect cell lines by super-resolution for over an order of magnitude longer than with tagged proteins. The extended time domain possible using these tools reveals dynamic nanoscale targeting between different organelles.

High density environmentally sensitive (HIDE) probes allow for long time-lapse super-resolution imaging of live cells. Here the authors develop a second HIDE probe with a bio-orthogonal labelling strategy to enable two-color nanoscopy of two organelles over extended periods.

Sub-second, super-resolved imaging of biological systems using parallel EO-STED

We present a parallel stimulated emission depletion (STED) nanoscope with no mechanical moving parts and sub-millisecond pixel dwell times, relying on electro-optical (EO) phase modulators. The nanoscope offers 1225-fold parallelization over single-doughnut-scanning STED and achieves a spatial resolution of 35 nm. We imaged immunostained nuclear pore complexes of zebrafish within their natural biological environment, demonstrating spatial and temporal resolutions of 56 nm and 0.2 s, respectively. Furthermore, we show parallel EO-STED sub-second imaging of microtubules inside living cells. Finally, we reveal the nanodomain organization of a eukaryotic initiation factor within the processing bodies of fixed cells. The potential of parallel EO-STED to offer microsecond pixel dwell times over large fields of view promises millisecond STED imaging.

Efficient two-photon excitation stimulated emission depletion nanoscope exploiting spatiotemporal information

Stimulated emission depletion (STED) microscopy is a powerful bioimaging technique that theoretically provides molecular spatial resolution while preserving the most important assets of fluorescence microscopy. When combined with two-photon excitation (2PE) microscopy (2PE-STED), subdiffraction resolution may be achieved for thick biological samples. The most straightforward implementation of 2PE-STED microscopy entails introduction of an STED beam operating in continuous wave (CW) into a conventional Ti:sapphire-based 2PE microscope (2PE CW-STED). In this implementation, resolution enhancement is typically achieved using time-gated detection schemes, often resulting in drastic signal-to-noise/-background ratio (SNR/SBR) reductions. Herein, we employ a pixel-by-pixel phasor approach to discard fluorescence photons lacking super-resolution information to enhance image SNR/SBR in 2PE CW-STED microscopy. We compare this separation of photons by lifetime tuning approach against other postprocessing algorithms and combine it with image deconvolution to further optimize image quality.

3D sub-diffraction imaging in a conventional confocal configuration by exploiting super-linear emitters

Sub-diffraction microscopy enables bio-imaging with unprecedented clarity. However, most super-resolution methods require complex, costly purpose-built systems, involve image post-processing and struggle with sub-diffraction imaging in 3D. Here, we realize a conceptually different super-resolution approach which circumvents these limitations and enables 3D sub-diffraction imaging on conventional confocal microscopes. We refer to it as super-linear excitation-emission (SEE) microscopy, as it relies on markers with super-linear dependence of the emission on the excitation power. Super-linear markers proposed here are upconversion nanoparticles of NaYF4, doped with 20% Yb and unconventionally high 8% Tm, which are conveniently excited in the near-infrared biological window. We develop a computational framework calculating the 3D resolution for any viable scanning beam shape and excitation-emission probe profile. Imaging of colominic acid-coated upconversion nanoparticles endocytosed by neuronal cells, at resolutions twice better than the diffraction limit both in lateral and axial directions, illustrates the applicability of SEE microscopy for sub-cellular biology.

Organic nanoparticles with ultrahigh stimulated emission depletion efficiency for low-power STED nanoscopy

Stimulated emission depletion (STED) nanoscopy is a powerful sub-diffraction imaging tool to probe subcellular structures and organelles. Conventional organic dyes require high STED power (PSTED) to obtain sub-diffraction resolution, leading to serious photo-bleaching. Herein, this study demonstrates highly emissive silica-coated core-shell organic nanoparticles (CSONPs) as a new type of photostable probe with ultrahigh stimulated emission depletion efficiency for low-power super-resolution STED nanoscopy. The CSONPs offer (i) efficient red emission with high solid-state fluorescence quantum yields around 0.6, (ii) large Stokes shift of 150 nm and (iii) high photostability owing to silica shell protection. The stimulated emission depletion efficiency (η) of CSONPs was extremely high up to η = 99% (the highest value reported so far) with a saturation intensity as low as Isat = 0.18 MW cm-2. Moreover, this research demonstrates the super-resolution imaging of living HeLa cells stained using CSONPs with a lateral spatial resolution of 63 nm at an extremely low depletion power of ISTED = 0.89 MW cm-2 and a long-term stability >600 s at η = 80% without obvious fatigue. The excellent and comprehensive performances of the CSONPs are promising for super-resolution imaging in biological applications.

Visualization of Bacterial Protein Complexes Labeled with Fluorescent Proteins and Nanobody Binders for STED Microscopy

In situ visualization of molecular assemblies near their macromolecular scale is a powerful tool to investigate fundamental cellular processes. Super-resolution light microscopies (SRM) overcome the diffraction limit and allow researchers to investigate molecular arrangements at the nanoscale. However, in bacterial cells, visualization of these assemblies can be challenging because of their small size and the presence of the cell wall. Thus, although conceptually promising, successful application of SRM techniques requires careful optimization in labeling biochemistry, fluorescent dye choice, bacterial biology and microscopy to gain biological insights. Here, we apply Stimulated Emission Depletion (STED) microscopy to visualize cell division proteins in bacterial cells, specifically E. coli and B. subtilis. We applied nanobodies that specifically recognize fluorescent proteins, such as GFP, mCherry2 and PAmCherry, fused to targets for STED imaging and evaluated the effect of various organic fluorescent dyes on the performance of STED in bacterial cells. We expect this research to guide scientists for in situ macromolecular visualization using STED in bacterial systems.

Two-photon STED nanoscopy realizing 100-nm spatial resolution utilizing high-peak-power sub-nanosecond 655-nm pulses

We developed two-photon excitation stimulated emission depletion (STED) nanoscopy using high-peak-power sub-nanosecond 655-nm pulses. The STED pulse exhibited ideal optical properties and sufficient pulse energy to realize a 70-nm spatial resolution in the compact setup with electrically controllable components. For biological applications, we screened suitable fluorescent dyes or proteins and realized the sub-100 nm spatial resolution imaging of presynaptic protein clusters in fixed primary cultured neurons without severe photobleaching. We expect this method to enable visualization of ultrastructures and the cluster dynamics of biomolecules representing physiological functions in living cells and tissue.

Various approaches for measurement of synaptic vesicle endocytosis at the central nerve terminal

At the presynaptic terminal, neurotransmitters are stored in synaptic vesicles (SVs), which are released and recycled via exo- and endocytosis. SV endocytosis is crucial for sustaining synaptic transmission by maintaining the SV pool. Many studies have shown that presynaptic dysfunction, particularly impairment of SV endocytosis, is related to neurological disorders. Notably, the presynaptic terminal is considered to be a sensitive structure because certain presynaptic dysfunctions, manifested as impaired SV endocytosis or ultrastructural changes in the presynaptic terminal, can be observed before there is a biochemical or pathological evidence of a neurological disorder. Therefore, monitoring and assessing the presynaptic function by SV endocytosis facilitates the development of early markers for neurological disorders. In this study, we reviewed the current methods for assessing and visualizing SV endocytosis at the central nerve terminal.

Photon-separation to enhance the spatial resolution of pulsed STED microscopy

Stimulated emission depletion microscopy (STED) is one of the pivotal super-resolution techniques. It overcomes the spatial resolution limit imposed by the diffraction by using an additional laser beam, the STED beam, intensity of which is directly related to the achievable resolution. Despite reaching nanometer resolution, much effort in recent years has been devoted to reducing the STED beam intensity because it may lead to photo-damaging effects. Accessing the spatial information encoded in the temporal dynamics of the detected fluorescent photons has been proved to be a powerful strategy and has contributed to the separation by lifetime tuning (SPLIT) technique. The SPLIT method uses the phasor analysis to efficiently distinguish photons emitted from the center and the periphery of the excitation spot. It thus improves the resolution without increasing the STED beam intensity. This method was proposed for architectures based on the STED beam running in continuous waves (CW-STED microscopy). Here, we extend it to pulsed STED beam implementations (pSTED microscopy). We show, through simulated and experimental data, that the pSTED-SPLIT method reduces the detection volume of the pSTED microscope without significantly decreasing the signal-to-noise ratio of the final image, thus effectively improving the resolution without increasing the STED beam intensity.

Fluorescence lifetime imaging nanoscopy for measuring Förster resonance energy transfer in cellular nanodomains

Microscopy methods used to measure Förster resonance energy transfer (FRET) between fluorescently labeled proteins can provide information on protein interactions in cells. However, these methods are diffraction-limited, thus do not enable the resolution of the nanodomains in which such interactions occur in cells. To overcome this limitation, we assess FRET with an imaging system combining fluorescence lifetime imaging microscopy with stimulated emission depletion, termed fluorescence lifetime imaging nanoscopy (FLIN). The resulting FRET-FLIN approach utilizes immunolabeling of proteins in fixed cultured neurons. We demonstrate the capacity to discriminate nanoclusters of synaptic proteins exhibiting variable degrees of interactions with labeled binding partners inside dendritic spines of hippocampal neurons. This method enables the investigation of FRET within nanodomains of cells, approaching the scale of molecular signaling.

Enhancement of fluorescence emission difference microscopy using conjugated vortex phase modulation

In this paper, we propose and demonstrate an improved fluorescence emission difference microscopy (FED) method, exploiting programmable phase modulation for image enhancement. The main novelty of the proposed approach lies in the matched size and intensity of two excitation spots. The proposed method improves the FED performance on image quality via artefact elimination. We demonstrate the feasibility of this method through theoretical studies and experimental tests. The experimental results of nanobeads and cells validate the practical performance of this method, which can enable reliable observations at superresolution in biomedical studies. LAY DESCRIPTION: In this paper, we propose a method to improve the imaging quality of regular fluorescence emission difference (FED) microscopy. In regular FED imaging, a solid and a doughnut excitation beam are successively used to acquire two images which are then subtracted with each other to improve the resolution of confocal microscopy. The doughnut beam can be generated by modulating the excitation beam with a vortex phase mask. Note that both of the excitation beam and the vortex phase mask must have the same handed direction in regular FED microscopy. However, some negative values may be produced and some information may be lost due to the subtraction process in regular FED imaging, which is mainly caused by the mismatched size and intensity of these two excitation spots. To address this issue, we propose conjugated FED (cFED) microscopy which additionally uses a conjugated vortex phase mask to modulate the solid beam to extend its focal spot size to be matched with the doughnut spot, which means the handed direction of the solid beam and the vortex phase mask is different. Besides, in order not to damage the resolution, the doughnut beam needs to be saturated to some degree. The experiment results show that, at the same resolution level, the negative values and the information loss in cFED image are all less than that of regular FED image.

Expansion Stimulated Emission Depletion Microscopy (ExSTED)

Stimulated emission depletion (STED) microscopy is routinely used to resolve the ultrastructure of cells with a ∼10-fold higher resolution compared to diffraction limited imaging. While STED microscopy is based on preparing the excited state of fluorescent probes with light, the recently developed expansion microscopy (ExM) provides subdiffraction resolution by physically enlarging the sample before microscopy. The expansion of the fixed cells by cross-linking and swelling of hydrogels easily enlarges the sample ∼4-fold and hence increases the effective optical resolution by this factor. To overcome the current limits of these complementary approaches, we combined ExM with STED (ExSTED) and demonstrated an increase in resolution of up to 30-fold compared to conventional microscopy (<10 nm lateral and ∼50 nm isotropic). While the increase in resolution is straightforward, we found that high-fidelity labeling via multi-epitopes is required to obtain emitter densities that allow ultrastructural details with ExSTED to be resolved. Our work provides a robust template for super-resolution microscopy of entire cells in the ten nanometer range.

Recent research on stimulated emission depletion microscopy for reducing photobleaching

Stimulated emission depletion (STED) microscopy is a useful tool in investigation for super-resolution realm. By silencing the peripheral fluorophores of the excited spot, leaving only the very centre zone vigorous for fluorescence, the effective point spread function (PSF) could be immensely squeezed and subcellular structures, such as organelles, become discernable. Nevertheless, because of the low cross-section of stimulated emission and the short fluorescence lifetime, the depletion power density has to be extremely higher than the excitation power density and molecules are exposed in high risk of photobleaching. The existence of photobleaching greatly limits the research of STED in achieving higher resolution and more delicate imaging quality, as well as long-term and dynamic observation. Since the first experimental implementation of STED microscopy, researchers have lift out variety of methods and techniques to alleviate the problem. This paper would present some researches via conventional methods which have been explored and utilised relatively thoroughly, such as fast scanning, time-gating, two-photon excitation (TPE), triplet relaxation (T-Rex) and background suppression. Alternatively, several up-to-date techniques, especially adaptive illumination, would also be unveiled for discussion in this paper. The contrast and discussion of these modalities would play an important role in ameliorating the research of STED microscopy.