Impact of solid surface hydrophobicity and micrococcal nuclease production on Staphylococcus aureus Newman biofilms

In situ growth of curcumin-loaded cellulose composite film for real-time monitoring of food freshness in smart packaging

Visual pH-responsive packaging material is particularly important in food supply chain safety monitoring due to their non-destructive monitoring method and intuitive result. However, it has always been limited by the instability performance of pH-response components and carriers, which further hinders its wide food safety application. To address these challenges, we selected cellulose with remarkable biocompatibility and mechanical properties as the carrier, and high pH-responsive curcumin to develop a smart packaging material (RC/GC composite film) with real-time food safety monitoring. Compared with pure cellulose film, the RC/GC composite film exhibited excellent mechanical properties (4-fold enhancement) and thermal stability (100 °C increasing). Meanwhile, based on the first reported strategy of curcumin in-situ growth during cellulose film formation, the RC/GC composite film exhibited exceptional antioxidant activity (89.2 %), antimicrobial property (91.6 %), and significant pH-responsive sensitivity (within 15 s). This innovative approach offers a new strategy for easy-to-use and effective monitoring of food spoilage in packaging materials.

Exploring the influence of deposit mineral composition on biofilm communities in oil and gas systems

Introduction

Inside oil and gas pipelines, native microbial communities and different solid compounds typically coexist and form mixed deposits. However, interactions between these deposits (primarily consisting of mineral phases) and microorganisms in oil and gas systems remain poorly understood. Here, we investigated the influence of magnetite (Fe3O4), troilite (FeS), and silica (SiO2) on the microbial diversity, cell viability, biofilm formation, and EPS composition of an oil-recovered multispecies consortium.

Methods

An oilfield-recovered microbial consortium was grown for 2 weeks in separate bioreactors, each containing 10 g of commercially available magnetite (Fe3O4), troilite (FeS), or silica (SiO2) at 40°C ± 1°C under a gas atmosphere of 20% CO2/80% N2.

Results

The microbial population formed in troilite significantly differed from those in silica and magnetite, which exhibited significant similarities. The dominant taxa in troilite was the Dethiosulfovibrio genus, whereas Sulfurospirillum dominated in magnetite and silica. Nevertheless, biofilm formation was lowest on troilite and highest on silica, correlating with the observed cell viability.

Discussion

The dissolution of troilite followed by the liberation of HS- (H2S) and Fe2+ into the test solution, along with its larger particle size compared to silica, likely contributed to the observed results. Confocal laser scanning microscopy revealed that the EPS of the biofilm formed in silica was dominated by eDNA, while those in troilite and magnetite primarily contained polysaccharides. Although the mechanisms of this phenomenon could not be determined, these findings are anticipated to be particularly valuable for enhancing MIC mitigation strategies currently used in oil and gas systems.

Rising to the surface: capturing and detecting bacteria by rationally-designed surfaces

Analytical microbiology has made substantial progress since its conception, starting from potato slices, through selective agar media, to engineered surfaces modified with capture probes. While the latter represents the dominant approach in designing sensors for bacteria detection, the importance of sensor surface properties is frequently ignored. Herein, we highlight their significant role in the complex process of bacterial transition from planktonic to sessile, representing the first and critical step in bacteria detection. We present the main surface features and discuss their effect on the bio-solid interface and the resulting sensing capabilities for both flat and particulate systems. The concepts of rationally-designed surfaces for enhanced bacterial detection are presented with recent examples of sensors (capture probe-free) relying solely on surface cues.

Secreted mammalian DNases protect against systemic bacterial infection by digesting biofilms

Extracellular DNase DNASE1L3 maintains tolerance to self-DNA in humans and mice, whereas the role of its homolog DNASE1 remains controversial, and the overall function of secreted DNases in immunity is unclear. We report that deletion of murine DNASE1 neither caused autoreactivity in isolation nor exacerbated lupus-like disease in DNASE1L3-deficient mice. However, combined deficiency of DNASE1 and DNASE1L3 rendered mice susceptible to bloodstream infection with Staphylococcus aureus. DNASE1/DNASE1L3 double-deficient mice mounted a normal innate response to S. aureus and did not accumulate neutrophil extracellular traps (NETs). However, their kidneys manifested severe pathology, increased bacterial burden, and biofilm-like bacterial lesions that contained bacterial DNA and excluded neutrophils. Furthermore, systemic administration of recombinant DNASE1 protein during S. aureus infection rescued the mortality of DNase-deficient mice and ameliorated the disease in wild-type mice. Thus, DNASE1 and DNASE1L3 jointly facilitate the control of bacterial infection by digesting extracellular microbial DNA in biofilms, suggesting the original evolutionary function of secreted DNases as antimicrobial agents.

Dialkyl Carbamoyl Chloride-Coated Dressing Prevents Macrophage and Fibroblast Stimulation via Control of Bacterial Growth: An In Vitro Assay

In this work, we evaluated the direct effect of a dialkyl carbamoyl chloride (DACC)-coated dressing on Staphylococcus aureus adhesion and growth in vitro, as well as the indirect effect of the dressing on fibroblast and macrophage activity. S. aureus cultures were treated with the dressing or gauze in Müller-Hinton medium or serum-supplemented Dulbecco’s modified Eagle medium. Bacterial growth and attachment were assessed through colony-forming units (CFU) and residual biomass analyses. Fibroblast and macrophage co-cultures were stimulated with filtered supernatants from the bacterial cultures treated with the DACC-coated dressing, following which tumor necrosis factor (TNF)-α/transforming growth factor (TGF)-β1 expression and gelatinolytic activity were assessed by enzyme-linked immunosorbent assays (ELISA) and zymography, respectively. The DACC-coated dressing bound 1.8−6.1% of all of the bacteria in the culture. Dressing-treated cultures presented biofilm formation in the dressing (enabling mechanical removal), with limited formation outside of it (p < 0.001). Filtered supernatants of bacterial cultures treated with the DACC-coated dressing did not over-stimulate TNF-α or TGF-β1 expression (p < 0.001) or increase gelatinolytic activity in eukaryotic cells, suggesting that bacterial cell integrity was maintained. Based on the above data, wound caregivers should consider the use of hydrophobic dressings as a first option for the management of acute or chronic wounds.

Analysis of Microorganism Colonization, Biofilm Production, and Antibacterial Susceptibility in Recurrent Tonsillitis and Peritonsillar Abscess Patients

Background: Despite the widespread use of antibiotics to treat infected tonsils, episodes of tonsillitis tend to recur and turn into recurrent tonsillitis (RT) or are complicated by peritonsillar abscesses (PTAs). The treatment of RT and PTAs remains surgical, and tonsillectomies are still relevant. Materials and methods: In a prospective, controlled study, we analyzed the bacteria of the tonsillar crypts of 99 patients with RT and 29 patients with a PTA. We performed the biofilm formation and antibacterial susceptibility testing of strains isolated from study patients. We compared the results obtained between patient groups with the aim to identify any differences that may contribute to ongoing symptoms of RT or that may play a role in developing PTAs. Results: The greatest diversity of microorganisms was found in patients with RT. Gram-positive bacteria were predominant in both groups. Candida species were predominant in patients with a PTA (48.3% of cases). Irrespective of patient group, the most commonly isolated pathogenic bacterium was S. aureus (in 33.3% of RT cases and in 24.14% of PTA cases). The most prevalent Gram-negative bacterium was K. pneumoniae (in 10.1% of RT cases and in 13.4% of PTA cases). At least one biofilm-producing strain was found in 37.4% of RT cases and in 27.6% of PTA cases. Moderate or strong biofilm producers were detected in 16 out of 37 cases of RT and in 2 out of 8 PTA cases. There was a statistically significant association found between the presence of Gram-positive bacteria and a biofilm-formation phenotype in the RT group and PTA group (Pearson χ2 test, p < 0.001). S. aureus and K. pneumoniae strains were sensitive to commonly used antibiotics. One S. aureus isolate was identified as MRSA. Conclusions: S. aureus is the most common pathogen isolated from patients with RT, and Candida spp. are the most common pathogens isolated from patients with a PTA. S. aureus isolates are susceptible to most antibiotics. Patients with RT more commonly have biofilm-producing strains, but patients with a PTA more commonly have biofilm non-producer strains. K. pneumoniae does not play a major role in biofilm production.

Seaweed Extracts as an Effective Gateway in the Search for Novel Antibiofilm Agents against Staphylococcus aureus

Treatment of biofilm-associated infections has become a major challenge in biomedical and clinical fields due to the failure of conventional treatments in controlling this highly complex and tolerant structure. Therefore, the search for novel antibiofilm agents with increased efficacy as those provided by natural products, presents an urgent need. The aim of this study was to explore extracts derived from three algae (green Ulva lactuca, brown Stypocaulon scoparium, red Pterocladiella capillacea) for their potential antibiofilm activity against Staphylococcus aureus, bacterium responsible for several acute and chronic infections. Seaweed extracts were prepared by successive maceration in various solvents (cyclohexane (CH), dichloromethane (DCM), ethyl acetate (EA), and methanol (MeOH)). The ability of the different extracts to inhibit S. aureus biofilm formation was assessed using colony-forming unit (CFU) counts method supported by epifluorescence microscopic analysis. Effects of active extracts on the biofilm growth cycle, as well as on S. aureus surface hydrophobicity were evaluated. Results revealed the ability of four extracts to significantly inhibit S. aureus biofilm formation. These findings were supported by microscopy analyses. The gradual increase in the number of adherent bacteria when the selected extracts were added at various times (t₀, t_2h, t_4h, t_6h, and t_24h) revealed their potential effect on the initial adhesion and proliferation stages of S. aureus biofilm development. Interestingly, a significant reduction in the surface hydrophobicity of S. aureus treated with dichloromethane (DCM) extract derived from U. lactuca was demonstrated. These findings present new insights into the exploration of seaweeds as a valuable source of antibiofilm agents with preventive effect by inhibiting and/or delaying biofilm formation.

Effect of Cobalt–Chromium–Molybdenum Implant Surface Modifications on Biofilm Development of S. aureus and S. epidermidis

Periprosthetic infections are an eminent factor in patient care and also having significant economic implications. The number of biofilm-infection related replacement surgeries is increasing and will continue to do so in the following decades. To reduce both the health burden of the patients and the costs to the healthcare sector, new solutions for implant materials resistant to such infections are necessary. This study researches different surface modifications of cobalt–chromium–molybdenum (CoCrMo) based implant materials and their influence on the development of biofilms. Three smooth surfaces (CoCrMo, CoCrMo TiN, and CoCrMo polished) and three rough surfaces (CoCrMo porous coated, CoCrMo cpTi, and CoCrMo TCP) are compared. The most common infectious agents in periprosthetic infections are Staphylococcus aureus and Coagulase-negative staphylococci (e.g., Staphylococcus epidermidis), therefore strains of these two species have been chosen as model organisms. Biofilms were grown on material disks for 48 h and cell number, polysaccharide content, and protein contend of the biofilms were measured. Additionally, regulation of genes involved in early biofilm development (S. aureus icaA, icaC, fnbA, fnbB, clfB, atl; S. epidermidis atlE, aap) was detected using RT-q-PCR. All results were compared to the base alloy without modifications. The results show a correlation between the surface roughness and the protein and polysaccharide content of biofilm structures and also the gene expression of the biofilms grown on the different surface modifications. This is supported by the significantly different protein and polysaccharide contents of the biofilms associated with rough and smooth surface types. Additionally, early phase biofilm genes (particularly icaA, icaC, and aap) are statistically significantly downregulated compared to the control at 48 h on rough surfaces. CoCrMo TiN and polished CoCrMo were the two smooth surface modifications which performed best on the basis of low biofilm content.

Micrococcal Nuclease stimulates Staphylococcus aureus Biofilm Formation in a Murine Implant Infection Model

Advancements in contemporary medicine have led to an increasing life expectancy which has broadened the application of biomaterial implants. As each implant procedure has an innate risk of infection, the number of biomaterial-associated infections keeps rising. Staphylococcus aureus causes 34% of such infections and is known as a potent biofilm producer. By secreting micrococcal nuclease S. aureus is able to escape neutrophil extracellular traps by cleaving their DNA-backbone. Also, micrococcal nuclease potentially limits biofilm growth and adhesion by cleaving extracellular DNA, an important constituent of biofilms. This study aimed to evaluate the impact of micrococcal nuclease on infection persistence and biofilm formation in a murine biomaterial-associated infection-model with polyvinylidene-fluoride mesh implants inoculated with bioluminescent S. aureus or its isogenic micrococcal nuclease deficient mutant. Supported by results based on in-vivo bioluminescence imaging, ex-vivo colony forming unit counts, and histological analysis it was found that production of micrococcal nuclease enables S. aureus bacteria to evade the immune response around an implant resulting in a persistent infection. As a novel finding, histological analysis provided clear indications that the production of micrococcal nuclease stimulates S. aureus to form biofilms, the presence of which extended neutrophil extracellular trap formation up to 13 days after mesh implantation. Since micrococcal nuclease production appeared vital for the persistence of S. aureus biomaterial-associated infection, targeting its production could be a novel strategy in preventing biomaterial-associated infection.

Modulating α-Synuclein Liquid-Liquid Phase Separation

Liquid-liquid phase separation (LLPS) is a crucial phenomenon for the formation of functional membraneless organelles. However, LLPS is also responsible for protein aggregation in various neurodegenerative diseases such as amyotrophic lateral sclerosis, Alzheimer's disease, and Parkinson's disease (PD). Recently, several reports, including ours, have shown that α-synuclein (α-Syn) undergoes LLPS and a subsequent liquid-to-solid phase transition, which leads to amyloid fibril formation. However, how the environmental (and experimental) parameters modulate the α-Syn LLPS remains elusive. Here, we show that in vitro α-Syn LLPS is strongly dependent on the presence of salts, which allows charge neutralization at both terminal segments of protein and therefore promotes hydrophobic interactions supportive for LLPS. Using various purification methods and experimental conditions, we showed, depending upon conditions, α-Syn undergoes either spontaneous (instantaneous) or delayed LLPS. Furthermore, we delineate that the kinetics of liquid droplet formation (i.e., the critical concentration and critical time) is relative and can be modulated by the salt/counterion concentration, pH, presence of surface, PD-associated multivalent cations, and N-terminal acetylation, which are all known to regulate α-Syn aggregation in vitro. Together, our observations suggest that α-Syn LLPS and subsequent liquid-to-solid phase transition could be pathological, which can be triggered only under disease-associated conditions (high critical concentration and/or conditions promoting α-Syn self-assembly). This study will significantly improve our understanding of the molecular mechanisms of α-Syn LLPS and the liquid-to-solid transition.

Comparison of Two Cutibacterium acnes Biofilm Models

The study of biofilms in vitro is complex and often limited by technical problems due to simplified models. Here, we compared C. acnes biofilm formation, from species involved in bone and prosthesis infection, in a static model with a dynamic model. Using similar parameters, the percentage of live bacteria within the biofilm was higher in dynamic than in static approach. In both models, bacterial internalization in osteoblast-like cells, playing the role of stress factor, affected this proportion but in opposite ways: increase of live bacteria proportion in the static model (×2.04 ± 0.53) and of dead bacteria proportion (×3.5 ± 1.03) in the dynamic model. This work highlights the huge importance in the selection of a relevant biofilm model in accordance with the environmental or clinical context to effectively improve the understanding of biofilms and the development of better antibiofilm strategies.

Staphylococcus aureus Strain-Dependent Biofilm Formation in Bone-Like Environment

Staphylococcus aureus species is an important threat for hospital healthcare because of frequent colonization of indwelling medical devices such as bone and joint prostheses through biofilm formations, leading to therapeutic failure. Furthermore, bacteria within biofilm are less sensitive to the host immune system responses and to potential antibiotic treatments. We suggested that the periprosthetic bone environment is stressful for bacteria, influencing biofilm development. To provide insights into S. aureus biofilm properties of three strains [including one methicillin-resistant S. aureus (MRSA)] under this specific environment, we assessed several parameters related to bone conditions and expected to affect biofilm characteristics. We reported that the three strains harbored different behaviors in response to the lack of oxygen, casamino acids and glucose starvation, and high concentration of magnesium. Each strain presented different biofilm biomass and live adherent cells proportion, or matrix production and composition. However, the three strains shared common responses in a bone-like environment: a similar production of extracellular DNA and engagement of the SOS response. This study is a step toward a better understanding of periprosthetic joint infections and highlights targets, which could be common among S. aureus strains and for future antibiofilm strategies.

Evaluation of the most promising techniques overcoming the algal problems takes place during the purification of drinking water

This work aims to study the technical problems of algal blooms that hinder the purification process of surface water used for drinking purposes and not its harmful effect on human health and the surrounding environment. It is also related to the demonstration of the improved coagulation process as an efficient technique in the algal removal from surface water by its application in jar tests. The study was carried out in the water purification plant in Nazlet Abdellah near the city of Assiut, Egypt. To achieve that, many ores and natural materials which aid in the removing of the algal blooms from surface water during the purification processes were tested. The examined materials should be technically and economically proper for improving the removal of algae from treated surface water for drinking purposes. The results showed that the kaolinite and bentonite (K and B) when coupled separately with aluminum sulfate (alum.) (the main coagulant agent) associated with the raw surface water in the flocculation basin were more efficient in the algae removal from treated surface water before reaching the sand filters by ratio up to 90%.

Heparin promotes fibrillation of most phenol-soluble modulin virulence peptides from Staphylococcus aureus

Phenol-soluble modulins (PSMs), such as α-PSMs, β-PSMs, and δ-toxin, are virulence peptides secreted by different Staphylococcus aureus strains. PSMs are able to form amyloid fibrils, which may strengthen the biofilm matrix that promotes bacterial colonization of and extended growth on surfaces (e.g., cell tissue) and increases antibiotic resistance. Many components contribute to biofilm formation, including the human-produced highly sulfated glycosaminoglycan heparin. Although heparin promotes S. aureus infection, the molecular basis for this is unclear. Given that heparin is known to induce fibrillation of a wide range of proteins, we hypothesized that heparin aids bacterial colonization by promoting PSM fibrillation. Here, we address this hypothesis using a combination of thioflavin T-fluorescence kinetic studies, CD, FTIR, electron microscopy, and peptide microarrays to investigate the mechanism of aggregation, the structure of the fibrils, and identify possible binding regions. We found that heparin accelerates fibrillation of all α-PSMs (except PSMα2) and δ-toxin but inhibits β-PSM fibrillation by blocking nucleation or reducing fibrillation levels. Given that S. aureus secretes higher levels of α-PSM than β-PSM peptides, heparin is therefore likely to promote fibrillation overall. Heparin binding is driven by multiple positively charged lysine residues in α-PSMs and δ-toxins, the removal of which strongly reduced binding affinity. Binding of heparin did not affect the structure of the resulting fibrils, that is, the outcome of the aggregation process. Rather, heparin provided a scaffold to catalyze or inhibit fibrillation. Based on our findings, we speculate that heparin may strengthen the bacterial biofilm and therefore enhance colonization via increased PSM fibrillation.

Comparative antibacterial activity of 2D materials coated on porous-titania

Plasma electrolytic oxidation (PEO) is a well-established technique for the treatment of titanium-based materials. The formed titania-PEO surface can improve the osseointegration properties of titanium implants. Nevertheless, it can not address bacterial infection problems associated with bone implants. Recently, 2-dimensional (2D) materials such as graphene oxide (GO), MXene, and hexagonal boron nitride (hBN) have received considerable attention for surface modifications showing their antibacterial properties. In this paper, a comparative study on the effect of partial deposition of these three materials over PEO titania substrates on the antibacterial efficiency and bioactivity is presented. Their partial deposition through drop-casting instead of continuous film coating is propsed to simultaneously address both antibacterial and osseointegration abilities. Our results demonstrate the dose-dependent nature of the deposited antibacterial agent on the PEO substrate. GO-PEO and MXene-PEO samples showed the highest antibacterial activity with 70 (±2) % and 97 (±0.5) % inactivation of S. aureus colonies in the low concentration group, respectively. Furthermore, only samples in the higher concentration group were effective against E. coli bacteria with 18 (±2) % and 17 (±4) % decrease in numbers of colonies for hBN-PEO and GO-PEO samples, respectively. Moreover, all antibacterial samples demonstrated acceptable bioactivity and good biocompatibility, making them a considerable candidates for the next generation of antibacterial titanium implants.

Influence of sub-inhibitory concentrations of antimicrobials on micrococcal nuclease and biofilm formation in Staphylococcus aureus

A major contributor to biomaterial associated infection (BAI) is Staphylococcus aureus. This pathogen produces a protective biofilm, making eradication difficult. Biofilms are composed of bacteria encapsulated in a matrix of extracellular polymeric substances (EPS) comprising polysaccharides, proteins and extracellular DNA (eDNA). S. aureus also produces micrococcal nuclease (MN), an endonuclease which contributes to biofilm composition and dispersion, mainly expressed by nuc1. MN expression can be modulated by sub-minimum inhibitory concentrations of antimicrobials. We investigated the relation between the biofilm and MN expression and the impact of the application of antimicrobial pressure on this relation. Planktonic and biofilm cultures of three S. aureus strains, including a nuc1 deficient strain, were cultured under antimicrobial pressure. Results do not confirm earlier findings that MN directly influences total biomass of the biofilm but indicated that nuc1 deletion stimulates the polysaccharide production per CFU in the biofilm in in vitro biofilms. Though antimicrobial pressure of certain antibiotics resulted in significantly increased quantities of polysaccharides per CFU, this did not coincide with significantly reduced MN activity. Erythromycin and resveratrol significantly reduced MN production per CFU but did not affect total biomass or biomass/CFU. Reduction of MN production may assist in the eradication of biofilms by the host immune system in clinical situations.

Bacterial Biofilm Growth on 3D-Printed Materials

Recent advances in 3D printing have led to a rise in the use of 3D printed materials in prosthetics and external medical devices. These devices, while inexpensive, have not been adequately studied for their ability to resist biofouling and biofilm buildup. Bacterial biofilms are a major cause of biofouling in the medical field and, therefore, hospital-acquired, and medical device infections. These surface-attached bacteria are highly recalcitrant to conventional antimicrobial agents and result in chronic infections. During the COVID-19 pandemic, the U.S. Food and Drug Administration and medical officials have considered 3D printed medical devices as alternatives to conventional devices, due to manufacturing shortages. This abundant use of 3D printed devices in the medical fields warrants studies to assess the ability of different microorganisms to attach and colonize to such surfaces. In this study, we describe methods to determine bacterial biofouling and biofilm formation on 3D printed materials. We explored the biofilm-forming ability of multiple opportunistic pathogens commonly found on the human body including Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus to colonize eight commonly used polylactic acid (PLA) polymers. Biofilm quantification, surface topography, digital optical microscopy, and 3D projections were employed to better understand the bacterial attachment to 3D printed surfaces. We found that biofilm formation depends on surface structure, hydrophobicity, and that there was a wide range of antimicrobial properties among the tested polymers. We compared our tested materials with commercially available antimicrobial PLA polymers.

Biocompatibility and Antibacterial Properties of ZnO-Incorporated Anodic Oxide Coatings on TiZrNb Alloy

In a present paper, we demonstrate novel approach to form ceramic coatings with incorporated ZnO nanoparticles (NPs) on low modulus TiZrNb alloy with enhanced biocompatibility and antibacterial parameters. Plasma Electrolytic Oxidation (PEO) was used to integrate ZnO nanoparticles (average size 12-27 nm), mixed with Ca(H2PO2)2 aqueous solution into low modulus TiZrNb alloy surface. The TiZrNb alloys with integrated ZnO NPs successfully showed higher surface porosity and contact angle. XPS investigations showed presence of Ca ions and absence of phosphate ions in the PEO modified layer, what explains higher values of contact angle. Cell culture experiment (U2OS type) confirmed that the surface of as formed oxide-ZnO NPs demonstrated hydrophobic properties, what can affect primary cell attachment. Further investigations showed that Ca ions in the PEO coating stimulated proliferative activity of attached cells, resulting in competitive adhesion between cells and bacteria in clinical situation. Thus, high contact angle and integrated ZnO NPs prevent bacterial adhesion and considerably enhance the antibacterial property of TiZrNb alloys. A new anodic oxide coating with ZnO NPs could be successfully used for modification of low modulus alloys to decrease post-implantation complications.