A self-inducible heterologous protein expression system in Escherichia coli

An efficient approach for overproduction of DNA polymerase from Pyrococcus furiosus using an optimized autoinduction system in Escherichia coli

High fidelity DNA polymerase from Pyrococcus furiosus (Pfupol) is an attractive alternative to the highly popular DNA polymerase from Thermus aquaticus. Because this enzyme is in great demand for biotechnological applications, optimizing Pfupol production is essential to supplying the industry's expanding demand. T7-induced promoter expression in Escherichia coli expression systems is used to express recombinant Pfupol; however, this method is not cost-effective. Here, we have effectively developed an optimized process for the autoinduction approach of Pfupol expression in a defined medium. To better examine Pfupol's activities, its purified fraction was used. A 71 mg/L of pure Pfupol was effectively produced, resulting in a 2.6-fold increase in protein yield when glucose, glycerol, and lactose were added in a defined medium at concentrations of 0.05%, 1%, and 0.6%, respectively, and the condition for production in a 5 L bioreactor was as follow: 200 rpm, 3 vvm, and 10% inoculant. Furthermore, the protein exhibited 1445 U/mg of specific activity when synthesized in its active state. This work presents a high level of Pfupol production, which makes it an economically viable and practically useful approach.

High-level expression of codon-optimized Taq DNA polymerase under the control of rhaBAD promoter

A DNA polymerase from Thermus aquaticus remains the most popular among DNA polymerases. It was widely applied in various fields involving the application of polymerase chain reaction (PCR), implying the high commercial value of this enzyme. For this reason, an attempt to obtain a high yield of Taq DNA polymerase is continuously conducted. In this study, the l-rhamnose-inducible promoter rhaBAD was utilized due to its ability to produce recombinant protein under tight control in E. coli expression system. Instead of full-length Taq polymerase, an N-terminal deletion of Taq polymerase was selected. To obtain a high-level expression, we attempted to optimize the codon by reducing the rare codon and GC content, and in a second attempt, we optimized the culture conditions for protein expression. The production of Taq polymerase using the optimum culture condition improved the level of expression by up to 3-fold. This approach further proved that a high level of recombinant protein expression could be achieved by yielding a purified Taq polymerase of about 8.5 mg/L of culture. This is the first research publication on the production of Taq polymerase with N-terminal deletion in E. coli with the control of the rhaBAD promoter system.

Production of reverse transcriptase from Moloney murine Leukemia virus in Escherichia coli expression system

Reverse transcriptase (RT) is one of the most important enzymes used in molecular biology applications, enabling the conversion of RNA into complementary DNA (cDNA) that is used in reverse transcription-polymerase chain reaction (RT-PCR). The high demand of RT enzymes in biotechnological applications making the production optimization of RT is crucial for meeting the growing demand in industrial settings. Conventionally, the expression of recombinant RT is T7-induced promoter using IPTG in Escherichia coli expression systems, which is not cost-efficient. Here, we successfully made an alternative procedure for RT expression from Moloney murine leukemia virus (M-MLV) using autoinduction method in chemically defined medium. The optimization of carbon source composition (glucose, lactose, and glycerol) was analyzed using Response Surface Methodology (RSM). M-MLV RT was purified for further investigation on its activity. A total of 32.8 mg/L purified M-MLV RT was successfully obtained when glucose, glycerol, and lactose were present at concentration of 0.06%, 0.9%, and 0.5% respectively, making a 3.9-fold improvement in protein yield. In addition, the protein was produced in its active form by displaying 7462.50 U/mg of specific activity. This study provides the first step of small-scale procedures of M-MLV RT production that make it a cost-effective and industrially applicable strategy.

Gene cloning, IPTG-independent auto-induction and characterization of a novel hyperstable S9 prolyl oligopeptidase having lipolytic activity from Thermotoga naphthophila RKU-10T with applications

A hyperstable lipase from Thermotoga naphthophila (TnLip) was cloned and overexpressed as a soluble and active monomeric protein in an effectual mesophilic host system. Sequence study revealed that TnLip is a peptidase S9 prolyl oligopeptidase domain (acetyl esterase/lipase-like protein), belongs to alpha/beta (α/β)-hydrolase superfamily containing a well-conserved α/β-hydrolase fold and penta-peptide (GLSAG) motif. Various cultivation and induction strategies were applied to improve the heterologous expression and bacterial biomass, but TnLip intracellular activity was enhanced by 14.25- fold with IPTG-independent auto-induction approach after 16 h (26 °C, 150 rev min-1) incubation. Purified TnLip (35 kDa) showed peak activity at 85 °C in McIlvaine buffer (pH 7.0-8.0), and has great stability over a broad range of pH (5.0-10.0), and temperature (40-85 °C) for 8 h. TnLip exhibited prodigious resistance toward various commercial detergents, chemical additives, and salt. TnLip activity was improved by 170.51 %, 130.67 %, 127.42 %, 126.54 %, 126.61 %, 120.32 %, and 116.31 % with 50 % (v/v) of methanol, ethanol, n-butanol, isopropanol, acetone, glycerol, and acetic acid, respectively. Moreover, with 3.0 M of NaCl, and 10 mM of Ca2+, Mn2+, and Mg2+ TnLip activity was augmented by 210 %, 185.64 %, 152.03 %, and 116.26 %, respectively. TnLip has an affinity with various substrates (p-nitrophenyl ester and natural oils) but maximal hydrolytic activity was perceived with p-nitrophenyl palmitate (pNPP, 3600 U mg-1) and olive oil (1182.05 U mg-1). The values of Km (0.576 mM), Vmax (4216 μmol mg-1 min-1), VmaxKm-1 (7319.44 min-1), kcat (1106.74 s-1), and kcatKm-1 (1921.42 mM-1 s-1) were calculated using pNPP substrate. Additionally, TnLip degraded animals' fats and removed oil stains within 3 h and 5 min, respectively. All these features make halo-alkali-thermophilic TnLip as an auspicious contender for laundry detergents (cleaning bio-additive), fat degradation, wastewater treatment and endorse eco-friendly stewardship along with various other biotechnological applications.

Efficient biosynthesis of D/L-alanine in the recombinant Escherichia coli BL21(DE3) by biobrick approach

Alanine is the most abundant chiral amino acid that exists into the D-alanine or L-alanine forms with diverse applications in the biomedical, pharmaceutical, plastics, and food industries. D/L-alanine production can be carried out through chemical, microbial fermentation, and biocatalytic methods and not much effective due to complicated processes or purification issues and is still challenging to achieve a higher yield. In the present study, biobrick method was utilized for efficient production of D/L-alanine in the recombinant Escherichia coli BL21(DE3) with tandem three-gene co-expression plasmid. Firstly, the co-expression plasmid pET-22bNS-DadX-Ald-Gdh containing three genes, alanine dehydrogenase (ald), alanine racemase (dadX), and glucose dehydrogenase (gdh) from Bacillus pseudofirmus OF4 were successfully constructed and introduced into the E. coli BL21(DE3) strain. Then, under optimized conditions in the whole-cell biocatalytic reaction [20 mM Na2CO3-NaHCO3 (pH 10.1), 200 mM D-glucose, 200 mM sodium pyruvate, and 200 mM ammonium chloride], the concentration of D-alanine and L-alanine reached the maximum value (6.48 g/L and 7.05 g/L) after 3.0 h reaction time at 37°C under 180 rpm rotation. Meanwhile, promoter replacement experiments and Western blot analysis revealed that the expression level of protein OF4Ald had a significant effect on the production of D/L-alanine, indicating that alanine dehydrogenase might be the rate-limiting enzyme for D/L-alanine synthesis. This study provides a simple, feasible, and efficient biosynthesis process of D/L-alanine, which could explore emerging applications for large-scale production of industrial bioproducts.

Detergent-resistant α-amylase derived from Anoxybacillus karvacharensis K1 and its production based on whey

In the field of biotechnology, the utilization of agro-industrial waste for generating high-value products, such as microbial biomass and enzymes, holds significant importance. This study aimed to produce recombinant α-amylase from Anoxybacillus karvacharensis strain K1, utilizing whey as an useful growth medium. The purified hexahistidine-tagged α-amylase exhibited remarkable homogeneity, boasting a specific activity of 1069.2 U mg-1. The enzyme displayed its peak activity at 55 °C and pH 6.5, retaining approximately 70% of its activity even after 3 h of incubation at 55 °C. Its molecular weight, as determined via SDS-PAGE, was approximately 69 kDa. The α-amylase demonstrated high activity against wheat starch (1648.8 ± 16.8 U mg-1) while exhibiting comparatively lower activity towards cyclodextrins and amylose (≤ 200.2 ± 16.2 U mg-1). It exhibited exceptional tolerance to salt, withstanding concentrations of up to 2.5 M. Interestingly, metal ions and detergents such as sodium dodecyl sulfate (SDS), Triton 100, Triton 40, and Tween 80, 5,5'-dithio-bis-[2-nitrobenzoic acid (DNTB), β-mercaptoethanol (ME), and dithiothreitol (DTT) had no significant inhibitory effect on the enzyme's activity, and the presence of CaCl2 (2 mM) even led to a slight activation of the recombinant enzyme (1.4 times). The Michaelis constant (Km) and maximum reaction rate (Vmax), were determined using soluble starch as a substrate, yielding values of 1.2 ± 0.19 mg mL-1 and 1580.3 ± 183.7 μmol mg-1 protein min-1, respectively. Notably, the most favorable conditions for biomass and recombinant α-amylase production were achieved through the treatment of acid whey with β-glucosidase for 24 h.

A major gene for chilling tolerance variation in Indica rice codes for a kinase OsCTK1 that phosphorylates multiple substrates under cold

Rice is susceptible to chilling stress. Identifying chilling tolerance genes and their mechanisms are key to improve rice performance. Here, we performed a genome-wide association study to identify regulatory genes for chilling tolerance in rice. One major gene for chilling tolerance variation in Indica rice was identified as a casein kinase gene OsCTK1. Its function and natural variation are investigated at the physiological and molecular level by its mutants and transgenic plants. Potential substrates of OsCTK1 were identified by phosphoproteomic analysis, protein-protein interaction assay, in vitro kinase assay, and mutant characterization. OsCTK1 positively regulates rice chilling tolerance. Three of its putative substrates, acidic ribosomal protein OsP3B, cyclic nucleotide-gated ion channel OsCNGC9, and dual-specific mitogen-activated protein kinase phosphatase OsMKP1, are each involved in chilling tolerance. In addition, a natural OsCTK1 chilling-tolerant (CT) variant exhibited a higher kinase activity and conferred greater chilling tolerance compared with a chilling-sensitive (CS) variant. The CT variant is more prevalent in CT accessions and is distributed more frequently in higher latitude compared with the CS variant. This study thus enables a better understanding of chilling tolerance mechanisms and provides gene variants for genetic improvement of chilling tolerance in rice.

Expression of soluble moloney murine leukemia virus-reverse transcriptase in Escherichia coli BL21 star (DE3) using autoinduction system

Autoinduction systems in Escherichia coli can control the production of proteins without the addition of a particular inducer. In the present study, we optimized the heterologous expression of Moloney Murine Leukemia Virus derived Reverse Transcriptase (MMLV-RT) in E. coli. Among 4 autoinduction media, media Imperial College resulted the highest MMLV-RT overexpression in E. coli BL21 Star (DE3) with incubation time 96 h. The enzyme was produced most optimum in soluble fraction of lysate cells. The MMLV-RT was then purified using the Immobilized Metal Affinity Chromatography method and had specific activity of 629.4 U/mg. The system resulted lower specific activity and longer incubation of the enzyme than a classical Isopropyl ß-D-1-thiogalactopyranoside (IPTG)-induction system. However, the autoinduction resulted higher yield of the enzyme than the conventional induction (27.8%). Techno Economic Analysis revealed that this method could produce MMLV-RT using autoinduction at half the cost of MMLV-RT production by IPTG-induction. Bioprocessing techniques are necessary to conduct to obtain higher quality of MMLV-RT under autoinduction system.

Essential factors, advanced strategies, challenges, and approaches involved for efficient expression of recombinant proteins in Escherichia coli

Producing recombinant proteins is a major accomplishment of biotechnology in the past century. Heterologous hosts, either eukaryotic or prokaryotic, are used for the production of these proteins. The utilization of microbial host systems continues to dominate as the most efficient and affordable method for biotherapeutics and food industry productions. Hence, it is crucial to analyze the limitations and advantages of microbial hosts to enhance the efficient production of recombinant proteins on a large scale. E. coli is widely used as a host for the production of recombinant proteins. Researchers have identified certain obstacles with this host, and given the growing demand for recombinant protein production, there is an immediate requirement to enhance this host. The following review discusses the elements contributing to the manifestation of recombinant protein. Subsequently, it sheds light on innovative approaches aimed at improving the expression of recombinant protein. Lastly, it delves into the obstacles and optimization methods associated with translation, mentioning both cis-optimization and trans-optimization, producing soluble recombinant protein, and engineering the metal ion transportation. In this context, a comprehensive description of the distinct features will be provided, and this knowledge could potentially enhance the expression of recombinant proteins in E. coli.

Vaccination-Route-Dependent Adjuvanticity of Antigen-Carrying Nanoparticles for Enhanced Vaccine Efficacy

Vaccination-route-dependent adjuvanticity was identified as being associated with the specific features of antigen-carrying nanoparticles (NPs) in the present work. Here, we demonstrated that the mechanical properties and the decomposability of NP adjuvants play key roles in determining the antigen accessibility and thus the overall vaccine efficacy in the immune system when different vaccination routes were employed. We showed that soft nano-vaccines were associated with more efficient antigen uptake when administering subcutaneous (S.C.) vaccination, while the slow decomposition of hard nano-vaccines promoted antigen uptake when intravenous (I.V.) vaccination was employed. In comparison to the clinically used aluminum (Alum) adjuvant, the NP adjuvants were found to stimulate both humoral and cellular immune responses efficiently, irrespective of the vaccination route. For vaccination via S.C. and I.V. alike, the NP-based vaccines show excellent protection for mice from Staphylococcus aureus (S. aureus) infection, and their survival rates are 100% after lethal challenge, being much superior to the clinically used Alum adjuvant.

A Lac Repressor-Inducible Baculovirus Expression Vector for Controlling Adeno-Associated Virus Capsid Ratios

The baculovirus expression vector (BEV) system is an efficient, cost-effective, and scalable method to produce recombinant adeno-associated virus (rAAV) gene therapy vectors. Most BEV designs emulate the wild-type AAV transcriptome and translate the AAV capsid proteins, VP1, VP2, and VP3, from a single mRNA transcript with three overlapping open reading frames (ORFs). Non-canonical translation initiation codons for VP1 and VP2 reduce their abundances relative to VP3. Changing capsid ratios to improve rAAV vector efficacy requires a theoretical modification of the translational context. We have developed a Lac repressor-inducible system to empirically regulate the expression of VP1 and VP2 proteins relative to VP3 in the context of the BEV. We demonstrate the use of this system to tune the abundance, titer, and potency of a neurospecific rAAV9 serotype derivative. VP1:VP2:VP3 ratios of 1:1:8 gave optimal potency for this rAAV. It was discovered that the ratios of capsid proteins expressed were different than the ratios that ultimately were in purified capsids. Overexpressed VP1 did not become incorporated into capsids, while overexpressed VP2 did. Overabundance of VP2 correlated with reduced rAAV titers. This work demonstrates a novel technology for controlling the production of rAAV in the BEV system and shows a new perspective on the biology of rAAV capsid assembly.

Uptake Quantification of Antigen Carried by Nanoparticles and Its Impact on Carrier Adjuvanticity Evaluation

Nanoparticles have been identified in numerous studies as effective antigen delivery systems that enhance immune responses. However, it remains unclear whether this enhancement is a result of increased antigen uptake when carried by nanoparticles or the adjuvanticity of the nanoparticle carriers. Consequently, it is important to quantify antigen uptake by dendritic cells in a manner that is free from artifacts in order to analyze the immune response when antigens are carried by nanoparticles. In this study, we demonstrated several scenarios (antigens on nanoparticles or inside cells) that are likely to contribute to the generation of artifacts in conventional fluorescence-based quantification. Furthermore, we developed the necessary assay for accurate uptake quantification. PLGA NPs were selected as the model carrier system to deliver EsxB protein (a Staphylococcus aureus antigen) in order to testify to the feasibility of the established method. The results showed that for the same antigen uptake amount, the antigen delivered by PLGA nanoparticles could elicit 3.6 times IL-2 secretion (representative of cellular immune response activation) and 1.5 times IL-12 secretion (representative of DC maturation level) compared with pure antigen feeding. The findings above give direct evidence of the extra adjuvanticity of PLGA nanoparticles, except for their delivery functions. The developed methodology allows for the evaluation of immune cell responses on an antigen uptake basis, thus providing a better understanding of the origin of the adjuvanticity of nanoparticle carriers. Ultimately, this research provides general guidelines for the formulation of nano-vaccines.

Understanding Autologous Spliceostatin Transcriptional Regulation to Derive Parts for Heterologous Expression in a Burkholderia Bacterial Host

Burkholderia β-Proteobacteria are emerging sources of natural products. We are interested in developing Burkholderia sp. FERM BP-3421 into a synthetic biology chassis to facilitate natural product discovery. FERM BP-3421 produces autologous spliceostatins on gram per liter scale. We reasoned that transcription factors and promoters that regulate spliceostatin biosynthesis would provide valuable parts for heterologous expression. Herein we demonstrate that fr9A encodes a pathway-specific transcriptional activator of spliceostatin biosynthesis. In-frame deletion of fr9A abolished spliceostatin production, which was restored by genetic complementation. Using transcriptomics and green fluorescent protein (GFP) reporter assays, we identified four fr9 promoters, three of which are activated by LuxR-type regulator Fr9A. We then constructed an Fr9A-regulated promoter system that was compared to benchmarks and effectively applied for GFP and capistruin lasso peptide expression in an optimized host background. Our findings enrich the genetic toolbox for optimizing heterologous expression and promoting the discovery and development of natural products from Burkholderia bacteria.

Kaleidoscope megamolecules synthesis and application using self-assembly technology

The megamolecules with high ordered structures play an important role in chemical biology and biomedical engineering. Self-assembly, a long-discovered but very appealing technique, could induce many reactions between biomacromolecules and organic linking molecules, such as an enzyme domain and its covalent inhibitors. Enzyme and its small-molecule inhibitors have achieved many successes in medical application, which realize the catalysis process and theranostic function. By employing the protein engineering technology, the building blocks of enzyme fusion protein and small molecule linker can be assembled into a novel architecture with the specified organization and conformation. Molecular level recognition of enzyme domain could provide both covalent reaction sites and structural skeleton for the functional fusion protein. In this review, we will discuss the range of tools available to combine functional domains by using the recombinant protein technology, which can assemble them into precisely specified architectures/valences and develop the kaleidoscope megamolecules for catalytic and medical application.

In vivo characterization of the bacterial intramembrane-cleaving protease RseP using the heme binding tag-based assay iCliPSpy

Regulated intramembrane proteolysis (RIP) describes the protease-dependent cleavage of transmembrane proteins within the hydrophobic core of cellular membranes. Intramembrane-cleaving proteases (I-CliPs) that catalyze these reactions are found in all kingdoms of life and are involved in a wide range of cellular processes, including signaling and protein homeostasis. I-CLiPs are multispanning membrane proteins and represent challenging targets in structural and enzyme biology. Here we introduce iCLiPSpy, a simple assay to study I-CLiPs in vivo. To allow easy detection of enzyme activity, we developed a heme-binding reporter based on TNFα that changes color after I-CLiP-mediated proteolysis. Co-expression of the protease and reporter in Escherichia coli (E. coli) results in white or green colonies, depending on the activity of the protease. As a proof of concept, we use this assay to study the bacterial intramembrane-cleaving zinc metalloprotease RseP in vivo. iCLiPSpy expands the methodological repertoire for identifying residues important for substrate binding or activity of I-CLiPs and can in principle be adapted to a screening assay for the identification of inhibitors or activators of I-CLiPs, which is of great interest for proteases being explored as biomedical targets.

High-efficiency production of the antimicrobial peptide pediocin PA-1 in metabolically engineered Corynebacterium glutamicum using a microaerobic process at acidic pH and elevated levels of bivalent calcium ions

BACKGROUND

Pediocin PA-1 is a bacteriocin of recognized value with applications in food bio-preservation and the medical sector for the prevention of infection. To date, industrial manufacturing of pediocin PA-1 is limited by high cost and low-performance. The recent establishment of the biotechnological workhorse Corynebacterium glutamicum as recombinant host for pediocin PA-1 synthesis displays a promising starting point towards more efficient production.

RESULTS

Here, we optimized the fermentative production process. Following successful simplification of the production medium, we carefully investigated the impact of dissolved oxygen, pH value, and the presence of bivalent calcium ions on pediocin production. It turned out that the formation of the peptide was strongly supported by an acidic pH of 5.7 and microaerobic conditions at a dissolved oxygen level of 2.5%. Furthermore, elevated levels of CaCl₂ boosted production. The IPTG-inducible producer C. glutamicum CR099 pXMJ19 P_tac pedACD^Cg provided 66 mg L^-1 of pediocin PA-1 in a two-phase batch process using the optimized set-up. In addition, the novel constitutive strain P_tuf pedACD^Cg allowed successful production without the need for IPTG.

CONCLUSIONS

The achieved pediocin titer surpasses previous efforts in various microbes up to almost seven-fold, providing a valuable step to further explore and develop this important bacteriocin. In addition to its high biosynthetic performance C. glutamicum proved to be highly robust under the demanding producing conditions, suggesting its further use as host for bacteriocin production.

One-Step Oxidation of Orange Peel Waste to Carbon Feedstock for Bacterial Production of Polyhydroxybutyrate

Orange peels are an abundant food waste stream that can be converted into useful products, such as polyhydroxyalkanoates (PHAs). Limonene, however, is a key barrier to building a successful biopolymer synthesis from orange peels as it inhibits microbial growth. We designed a one-pot oxidation system that releases the sugars from orange peels while eliminating limonene through superoxide (O2• -) generated from potassium superoxide (KO2). The optimum conditions were found to be treatment with 0.05 M KO2 for 1 h, where 55% of the sugars present in orange peels were released and recovered. The orange peel sugars were then used, directly, as a carbon source for polyhydroxybutyrate (PHB) production by engineered Escherichia coli. Cell growth was improved in the presence of the orange peel liquor with 3 w/v% exhibiting 90-100% cell viability. The bacterial production of PHB using orange peel liquor led to 1.7-3.0 g/L cell dry weight and 136-393 mg (8-13 w/w%) ultra-high molecular weight PHB content (Mw of ~1900 kDa) during a 24 to 96 h fermentation period. The comprehensive thermal characterization of the isolated PHBs revealed polymeric properties similar to PHBs resulting from pure glucose or fructose. Our one-pot oxidation process for liberating sugars and eliminating inhibitory compounds is an efficient and easy method to release sugars from orange peels and eliminate limonene, or residual limonene post limonene extraction, and shows great promise for extracting sugars from other complex biomass materials.

Application of Milk Permeate as an Inducer for the Production of Microbial Recombinant Lipolytic Enzymes

Recombinantly produced enzymes are applied in many fields, ranging from medicine to food and nutrition, production of detergents, textile, leather, paper, pulp, and plastics. Thus, the cost-effectiveness of recombinant enzyme synthesis is an important issue in biotechnological industry. Isopropyl-β-D-thiogalactoside (IPTG), an analog of lactose, is currently the most widely used chemical agent for the induction of recombinant enzyme synthesis. However, the use of IPTG can lead to production of toxic elements and can introduce physiological stress to cells. Thus, this study aims to find a simpler, cheaper, and safer way to produce recombinant enzymes. In this study, production of several previously designed recombinant lipolytic enzymes (GDEst-95 esterase, GD-95RM lipase, fused GDEst-lip lipolytic enzyme, and putative cutinase Cut+SP from Streptomyces scabiei 87.22) is induced in E. coli BL21 (DE3) using 4 mM milk permeate, a type of waste of the milk manufacturing process possessing >82% lactose. The SDS-PAGE analysis clearly indicates synthesis of all target enzymes during a 2–12 h post-induction timeframe. Further investigation of GDEst-95, GD-95RM, GDEst-lip, and Cut+SP biocatalysts was carried out spectrophotometrically and using zymography method, confirming production of fully active enzymes.

Functional mining of novel terpene synthases from metagenomes

BACKGROUND

Terpenes are one of the most diverse and abundant classes of natural biomolecules, collectively enabling a variety of therapeutic, energy, and cosmetic applications. Recent genomics investigations have predicted a large untapped reservoir of bacterial terpene synthases residing in the genomes of uncultivated organisms living in the soil, indicating a vast array of putative terpenoids waiting to be discovered.

RESULTS

We aimed to develop a high-throughput functional metagenomic screening system for identifying novel terpene synthases from bacterial metagenomes by relieving the toxicity of terpene biosynthesis precursors to the Escherichia coli host. The precursor toxicity was achieved using an inducible operon encoding the prenyl pyrophosphate synthetic pathway and supplementation of the mevalonate precursor. Host strain and screening procedures were finely optimized to minimize false positives arising from spontaneous mutations, which avoid the precursor toxicity. Our functional metagenomic screening of human fecal metagenomes yielded a novel β-farnesene synthase, which does not show amino acid sequence similarity to known β-farnesene synthases. Engineered S. cerevisiae expressing the screened β-farnesene synthase produced 120 mg/L β-farnesene from glucose (2.86 mg/g glucose) with a productivity of 0.721 g/L∙h.

CONCLUSIONS

A unique functional metagenomic screening procedure was established for screening terpene synthases from metagenomic libraries. This research proves the potential of functional metagenomics as a sequence-independent avenue for isolating targeted enzymes from uncultivated organisms in various environmental habitats.

Indirect optimization of staphylokinase expression level in dicistronic auto-inducible system

Design of experiment (DOE) is a statistical approach for designing, performing, and interpreting a large set of data with the minimum number of tests. In our previous study, we developed a novel Hsp27 SILEX system for production of recombinant proteins. In the present study, we optimized indirectly the most effective factors including inoculation load, self-induction temperature, and culture media on autoinduction of staphylokinase (SAK) expression using RSM methodology and fluorometry. The expression level of SAK was assayed at different runs after 6 h incubation at 90 rpm. The results indicated all parameters significantly affect the SAK expression level (p < 0.05). The optimum expression condition was obtained with an inoculation load of 0.05, a temperature of 25 °C, and TB culture medium. The analysis of variance with a R² value of 0.91 showed that a quadratic model well described this prediction (p < 0.05). Applying the optimized condition led to an approximately fourfold increase in the SAK expression level (from 1.3 to 5.2 µg/ml). Moreover, the recombinant protein was purified using immobilized metal affinity chromatography and the activity was also confirmed by semi-quantitative caseinolytic method.

Strategies for efficient production of recombinant proteins in Escherichia coli: alleviating the host burden and enhancing protein activity

Escherichia coli, one of the most efficient expression hosts for recombinant proteins (RPs), is widely used in chemical, medical, food and other industries. However, conventional expression strains are unable to effectively express proteins with complex structures or toxicity. The key to solving this problem is to alleviate the host burden associated with protein overproduction and to enhance the ability to accurately fold and modify RPs at high expression levels. Here, we summarize the recently developed optimization strategies for the high-level production of RPs from the two aspects of host burden and protein activity. The aim is to maximize the ability of researchers to quickly select an appropriate optimization strategy for improving the production of RPs.

Substrate-inducible and antibiotic-free high-level 4-hydroxyvaleric acid production in engineered Escherichia coli

In this study, we developed a levulinic acid (LA)-inducible and antibiotic-free plasmid system mediated by HpdR/PhpdH and infA-complementation to produce 4-hydroxyvaleric acid (4-HV) from LA in an engineered Escherichia coli strain. The system was efficiently induced by the addition of the LA substrate and resulted in tight dose-dependent control and fine-tuning of gene expression. By engineering the 5′ untranslated region (UTR) of hpdR mRNA, the gene expression of green fluorescent protein (GFP) increased by at least two-fold under the hpdH promoter. Furthermore, by evaluating the robustness and plasmid stability of the proposed system, the engineered strain, IRV750f, expressing the engineered 3-hydroxybutyrate dehydrogenase (3HBDH∗) and formate dehydrogenase (CbFDH), produced 82 g/L of 4-HV from LA, with a productivity of 3.4 g/L/h and molar conversion of 92% in the fed-batch cultivation (5 L fermenter) without the addition of antibiotics or external inducers. Overall, the reported system was highly beneficial for the large-scale and cost-effective microbial production of value-added products and bulk chemicals from the renewable substrate, LA.

A systematic approach to reduce intraocular pressure (IOP) for the treatment of glaucoma

Glaucoma is the leading cause of irreversible blindness due to increased intraocular pressure (IOP) in the eye. We have developed a novel treatment option for glaucoma based on a real-time IOP-dependent nitric oxide synthase (NOS) and packed in a therapeutic contact lens to reduce the IOP. First, 1.6 nmole nitric oxide was produced from the genetic chassis, which was optimized for isopropyl β-d-1-thiogalactopyranoside (IPTG) induction in a T7 expression system. For biosafety concerns to human being, the csgAD genes responsible for curli biofilm formation in E. coli were co-expressed with NOS in the designated NOSAD strain to strengthen the adherence of cells to the contact lens, thereby preventing the contamination into the eyes. Moreover, NOSAD is a diaminopimelic acid (DAP) auxotrophic strain, which cannot survive without supplementation of DAP and reached the critical consideration of biosafety to the environment. We also demonstrated that the nitric oxide diffusion was 3.6-times enhanced from penetration into the aqueous humor of porcine eyes. The deformation ratio of the contact lens was correlated to the change of IOP by using a digital image correlation (DIC) system in a porcine eye model. The novel systematic approach provides an alternative treatment for glaucoma patients in the future. This article is protected by copyright. All rights reserved.

Intermittent induction of LEA peptide by lactose enhances the expression of insecticidal proteins in Bacillus thuringiensis

Cry toxins from Bacillus thuringiensis (Bt) have been extensively applied in agriculture to substitute the use of chemical insecticides. We have previously reported the use of a coexpression system in which late embryogenesis abundant (LEA) peptides under the control of the lac promoter increase the expression of insecticidal proteins in Bt. The use of lactose to induce the expression of LEA peptides may be a desirable alternative to isopropyl β‐D‐thiogalactopyranoside, the most frequently used inducer for recombinant protein expression. In this study we investigated the use of lactose as an inducer for optimal protein expression. We observed enhanced insecticidal Cry protein expression by applying a simple technique based on intermittent induction, and then optimized concentration and the point of induction time from the 11^th h to the 15^th h. Our data suggest that intermittent induction of lactose might be a new technique for the enhancement of bacterial protein expression.

Strategies for Successful Over-Expression of Human Membrane Transport Systems Using Bacterial Hosts: Future Perspectives

Ten percent of human genes encode for membrane transport systems, which are key components in maintaining cell homeostasis. They are involved in the transport of nutrients, catabolites, vitamins, and ions, allowing the absorption and distribution of these compounds to the various body regions. In addition, roughly 60% of FDA-approved drugs interact with membrane proteins, among which are transporters, often responsible for pharmacokinetics and side effects. Defects of membrane transport systems can cause diseases; however, knowledge of the structure/function relationships of transporters is still limited. Among the expression of hosts that produce human membrane transport systems, E. coli is one of the most favorable for its low cultivation costs, fast growth, handiness, and extensive knowledge of its genetics and molecular mechanisms. However, the expression in E. coli of human membrane proteins is often toxic due to the hydrophobicity of these proteins and the diversity in structure with respect to their bacterial counterparts. Moreover, differences in codon usage between humans and bacteria hamper translation. This review summarizes the many strategies exploited to achieve the expression of human transport systems in bacteria, providing a guide to help people who want to deal with this topic.

Highly Reversible Tunable Thermal-Repressible Split-T7 RNA Polymerases (Thermal-T7RNAPs) for Dynamic Gene Regulation

Temperature is a physical cue that is easy to apply, allowing cellular behaviors to be controlled in a contactless and dynamic manner via heat-inducible/repressible systems. However, existing heat-repressible systems are limited in number, rely on thermal sensitive mRNA or transcription factors that function at low temperatures, lack tunability, suffer delays, and are overly complex. To provide an alternative mode of thermal regulation, we developed a library of compact, reversible, and tunable thermal-repressible split-T7 RNA polymerase systems (Thermal-T7RNAPs), which fused temperature-sensitive domains of Tlpa protein with split-T7RNAP to enable direct thermal control of the T7RNAP activity between 30 and 42 °C. We generated a large mutant library with varying thermal performances via an automated screening framework to extend temperature tunability. Lastly, using the mutants, novel thermal logic circuitry was implemented to regulate cell growth and achieve active thermal control of the cell proportions within co-cultures. Overall, this technology expanded avenues for thermal control in biotechnology applications.

Expression and production of pigment epithelium-derived factor (PEDF) and PEDF receptor variants from mammalian and bacterial cells

Human SERPINF1 gene codes for pigment epithelium-derived factor (PEDF), a secreted glycoprotein and member of the SERPIN superfamily. To obtain large amounts of recombinant PEDF proteins, we subcloned the coding sequence of human SERPINF1 mutated versions into the pCEP4 vector and generated stably transfected HEK.Ebna cells. The cells produced and secreted recombinant PEDF proteins into the culturing media. The recombinant PEDF proteins were purified by ion-exchange column chromatography and milligram amounts of highly purified protein were recovered. PEDF has affinity for PEDF-receptor (PEDF-R), a membrane-linked lipase encoded by the PNPLA2 gene. Recombinant PEDF-R truncated versions were obtained from Escherichia coli containing expression vectors with human PNPLA2 cDNAs with 3'end deletions and by induction with isopropyl β-d-1-thiogalactopyranoside. The bacterially derived PEDF-R proteins in insoluble inclusion bodies were solubilized with urea and purified by cation-exchange column chromatography. C-terminally truncated PEDF-R versions containing the ligand binding region retained the ability to bind PEDF. The data demonstrate that mammalian-derived recombinant PEDF and bacterially derived recombinant PEDF-R can be produced and purified in large amounts for further use in structural and biological studies.

Thermogenetics: Applications come of age

Temperature is a ubiquitous physical cue that is non-invasive, penetrative and easy to apply. In the growing field of thermogenetics, through beneficial repurposing of natural thermosensing mechanisms, synthetic biology is bringing new opportunities to design and build robust temperature-sensitive (TS) sensors which forms a thermogenetic toolbox of well characterised biological parts. Recent advancements in technological platforms available have expedited the discovery of novel or de novo thermosensors which are increasingly deployed in many practical temperature-dependent biomedical, industrial and biosafety applications. In all, the review aims to convey both the exhilarating recent technological developments underlying the advancement of thermosensors and the exciting opportunities the nascent thermogenetic field holds for biomedical and biotechnology applications.

Levulinic Acid-Inducible and Tunable Gene Expression System for Methylorubrum extorquens

Methylorubrum extorquens AM1 is an efficient platform strain possessing biotechnological potential in formate- and methanol-based single carbon (C1) bioeconomy. Constitutive expression or costly chemical-inducible expression systems are not always desirable. Here, several glucose-, xylose-, and levulinic acid (LA)-inducible promoter systems were assessed for the induction of green fluorescent protein (GFP) as a reporter protein. Among them, the LA-inducible gene expression system (HpdR/P _hpdH ) showed a strong expression of GFP (51-fold) compared to the control. The system was induced even at a low concentration of LA (0.1 mM). The fluorescence intensity increased with increasing concentrations of LA up to 20 mM. The system was tunable and tightly controlled with meager basal expression. The maximum GFP yield obtained using the system was 42 mg/g biomass, representing 10% of the total protein content. The efficiency of the proposed system was nearly equivalent (90%-100%) to that of the widely used strong promoters such as P _mxaF and P _L/O4 . The HpdR/P _hpdH system worked equally efficiently in five different strains of M. extorquens. LA is a low-cost, renewable, and sustainable platform chemical that can be used to generate a wide range of products. Hence, the reported system in potent strains of M. extorquens is highly beneficial in the C1-biorefinery industry to produce value-added products and bulk chemicals.

Overcoming the Solubility Problem in E. coli: Available Approaches for Recombinant Protein Production

Despite the importance of recombinant protein production in the academy and industrial fields, many issues concerning the expression of soluble and homogeneous products are still unsolved. Several strategies were developed to overcome these obstacles; however, at present, there is no magic bullet that can be applied for all cases. Indeed, several key expression parameters need to be evaluated for each protein. Among the different hosts for protein expression, Escherichia coli is by far the most widely used. In this chapter, we review many of the different tools employed to circumvent protein insolubility problems.

Rapid screening of high expressing Escherichia coli colonies using a novel dicistronic-autoinducible system

Background

Identification of high-expressing colonies is one of the main concerns in the upstream process of recombinant protein development. The common method to screen high-producing colonies is SDS-PAGE, a laborious and time-consuming process, which is based on a random and qualitative way. The current study describes the design and development of a rapid screening system composed of a dicistronic expression system containing a reporter (enhanced green fluorescent protein, eGFP), protein model (staphylokinase, SAK), and a self-inducible system containing heat shock protein 27 (Hsp27).

Results

Dicistronic-autoinducible system expressed eGFP and SAK successfully in 5-ml and 1-L culture volumes. High expressing colonies were identified during 6 h via fluorescent signals. In addition, the biological activity of the protein model was confirmed semi-quantitatively and quantitatively through radial caseinolytic and chromogenic methods, respectively. There was a direct correlation between eGFP fluorescent intensity and SAK activity. The correlation and linearity of expression between the two genes were respectively confirmed with Pearson correlation and linear regression. Additionally, the precision, limit of detection (LOD), and limit of quantification (LOQ) were determined. The expression of eGFP and SAK was stable during four freeze–thaw cycles. In addition, the developed protocol showed that the transformants can be inoculated directly to the culture, saving time and reducing the error-prone step of colony picking.

Conclusion

The developed system is applicable for rapid screening of high-expressing colonies in most research laboratories. This system can be investigated for other recombinant proteins expressed in E. coli with a potential capability for automation and use at larger scales.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01711-2.

Development of an Autoinducible Plasmid for Recombinant Protein Production

BACKGROUND

The production of recombinant proteins in E. coli involves such factors as host strains, expression vectors, culture media, and induction methods. The typical procedure to produce heterologous proteins consists of the following: (1) insertion of the target gene into a suitable vector to construct an overexpression plasmid, (2) transformation of a strain specialized for protein production with the constructed plasmid DNA, (3) growth of the host in a suitable medium and induction of the protein production at a right moment, and (4) further growth to get the maximum yield. There are hurdles involved in each of these steps, and researchers have developed many materials or methods, which often require special recipes or procedures.

OBJECTIVE

To eliminate the special requirements for the recombinant protein production by using readily available materials. Also to save time and effort in the routine protein production work.

METHOD

We started with a vector capable of producing a target protein fused to the C-terminus of the maltose binding protein (MBP). The mCherry (red fluorescent protein) gene was fused to MBP. It acted as a reporter in the initial screening procedure. The original lethal gene (barnase) was replaced with sacB. We chose 3 stationary phase promoters, and made hybrids of them by mixing halves from each one. The T5 promoter was replaced with these stationary phase promoters or their hybrids. The best plasmid was selected by the color intensity of the cell pellet. MBP and GST genes were inserted in place of sacB, and their production yields were compared with the original plasmid in the conventional way of expression.

RESULTS

We constructed an expression plasmid with an autoinducible promoter working in a host that was not specially designed for protein production and in a TB medium which did not contain any secret ingredient, nor was difficult to prepare unlike Studier's defined medium. This plasmid also contains a color indicator which turns red when protein production is successful. We tested our system with the maltose binding protein (MBP) and the glutathione S-transferase (GST), and showed that both proteins were produced to a level comparable to what the commercial medium and/or the specialized strain yielded.

CONCLUSION

We developed a plasmid equipped with an autoinducible promoter, a hybrid of the two promoters which were activated at the stationary phase. This plasmid does not need a special E. coli strain nor a sophisticated nor an expensive medium. It produces an intense red (or pink) color, which can be used as an indicator of a successful production of the target protein and as a predictive measure of the amount of the produced target protein. We speculate that this plasmid will have its greatest advantage when growing cells at low temperatures which would inevitably take a long time.  .

Inducible and tunable gene expression systems for Pseudomonas putida KT2440

Inducible and tunable expression systems are essential for the microbial production of biochemicals. Five different carbon source- and substrate-inducible promoter systems were developed and further evaluated in Pseudomonas putida KT2440 by analyzing the expression of green fluorescent protein (GFP) as a reporter protein. These systems can be induced by low-cost compounds such as glucose, 3-hydroxypropionic acid (3HP), levulinic acid (LA), and xylose. 3HP-inducible HpdR/P_hpdH was also efficiently induced by LA. LvaR/P_lvaA and XutR/P_xutA systems were induced even at low concentrations of LA (0.1 mM) and xylose (0.5 mM), respectively. Glucose-inducible HexR/P_zwf1 showed weak GFP expression. These inducer agents can be used as potent starting materials for both cell growth and the production of a wide range of biochemicals. The efficiency of the reported systems was comparable to that of conventional chemical-inducible systems. Hence, the newly investigated promoter systems are highly useful for the expression of target genes in the widely used synthetic biology chassis P. putida KT2440 for industrial and medical applications.

Insertion of prpoD_rpoS fragment enhances expression of recombinant protein by dps auto-inducible promoter in Escherichia coli

BACKGROUND

Nowadays, recombinant therapeutic proteins have been widely produced and consumed. For the safety and effectiveness of the protein production, an auto-inducible expression vector is required to replace inducer interference, which is uneconomic and could be harmful. In this research, an auto-inducible expression plasmid, pCAD₂_sod (a pBR322 derivate plasmid), which was under dps (RpoS-dependent gene) promoter control, was modified to provide RpoS at earlier phase. Hence, accumulates more target protein and resulting a new plasmid, pCAD₂⁺_sod. pCAD₂_sod had been constructed to automatically induces the expression of recombinant superoxide dismutase (SOD) from Staphylococcus equorum (rMnSODSeq) in the stationary growth phase of Escherichia coli. This work aimed to obtain pCAD₂⁺_sod and determine the expression level of rMnSODSeq on mRNA and protein level.

METHOD AND RESULTS

A synthetic rpoS coding region under rpoD promoter control (prpoD_rpoS) was inserted to pCAD₂_sod and generated pCAD₂⁺_sod. The rMnSODSeq (24.3 kDa) produced from pCAD₂⁺_sod was ~ 1.5 fold higher at 37 °C and more intense at 43 °C compared to that from pCAD₂_sod, likewise shifted to earlier phase (after 1 h of incubation), as shown in the SDS-PAGE. The dismutase activity was also retained after zymography assay. The mRNA level from pCAD₂⁺_sod was determined by qPCR and gave quantification cycle (Cq) values of cDNA lowest among others. It made the relative quantification (RQ) of the mRNA expression towards rho reference gene were high.

CONCLUSIONS

The prpoD_rpoS insertion shifts and increases the rMnSODSeq production from stationary to exponential phase. The pCAD₂⁺_sod plasmid is potential for further recombinant protein productions.

Recent Advances in the Synthetic Biology of Natural Drugs

Natural drugs have been transformed and optimized during the long process of evolution. These compounds play a very important role in the protection of human health and treatment of human diseases. Sustainable approaches to the generation of raw materials for pharmaceutical products have been extensively investigated in drug research and development because chemical synthesis is costly and generates pollution. The present review provides an overview of the recent advances in the synthetic biology of natural drugs. Particular attention is paid to the investigations of drugs that may be mass-produced by the pharmaceutical industry after optimization of the corresponding synthetic systems. The present review describes the reconstruction and optimization of biosynthetic pathways for nine drugs, including seven drugs from plant sources and two drugs from microbial sources, suggesting a new strategy for the large-scale preparation of some rare natural plant metabolites and highly bioactive microbial compounds. Some of the suggested synthetic methods remain in a preliminary exploration stage; however, a number of these methods demonstrated considerable application potential. The authors also discuss the advantages and disadvantages of the application of synthetic biology and various expression systems for heterologous expression of natural drugs. Thus, the present review provides a useful perspective for researchers attempting to use synthetic biology to produce natural drugs.

Producing molecular biology reagents without purification

We recently developed 'cellular' reagents-lyophilized bacteria overexpressing proteins of interest-that can replace commercial pure enzymes in typical diagnostic and molecular biology reactions. To make cellular reagent technology widely accessible and amenable to local production with minimal instrumentation, we now report a significantly simplified method for preparing cellular reagents that requires only a common bacterial incubator to grow and subsequently dry enzyme-expressing bacteria at 37°C with the aid of inexpensive chemical desiccants. We demonstrate application of such dried cellular reagents in common molecular and synthetic biology processes, such as PCR, qPCR, reverse transcription, isothermal amplification, and Golden Gate DNA assembly, in building easy-to-use testing kits, and in rapid reagent production for meeting extraordinary diagnostic demands such as those being faced in the ongoing SARS-CoV-2 pandemic. Furthermore, we demonstrate feasibility of local production by successfully implementing this minimized procedure and preparing cellular reagents in several countries, including the United Kingdom, Cameroon, and Ghana. Our results demonstrate possibilities for readily scalable local and distributed reagent production, and further instantiate the opportunities available via synthetic biology in general.

Comparison of E. coli based self-inducible expression systems containing different human heat shock proteins

IPTG-inducible promoter is popularly used for the expression of recombinant proteins. However, it is not suitable at the industrial scale due to the high cost and toxicity on the producing cells. Recently, a Self-Inducible Expression (SILEX) system has developed to bypass such problems using Hsp70 as an autoinducer. Herein, the effect of other heat shock proteins on the autoinduction of green fluorescent protein (EGFP), romiplostim, and interleukin-2 was investigated. For quantitative measurements, EGFP expression was monitored after double-transformation of pET28a-EGFP and pET21a-(Hsp27/Hsp40/Hsp70) plasmids into E. coli using fluorimetry. Moreover, the expression level, bacterial growth curve, and plasmid and expression stability were compared to an IPTG- inducible system using EGFP. Statistical analysis revealed a significant difference in EGFP expression between autoinducible and IPTG-inducible systems. The expression level was higher in Hsp27 system than Hsp70/Hsp40 systems. However, the highest amount of expression was observed for the inducible system. IPTG-inducible and Hsp70 systems showed more lag-time in the bacterial growth curve than Hsp27/Hsp40 systems. A relatively stable EGFP expression was observed in SILEX systems after several freeze-thaw cycles within 90 days, while, IPTG-inducible system showed a decreasing trend compared to the newly transformed bacteria. Moreover, the inducible system showed more variation in the EGFP expression among different clones than clones obtained by SILEX systems. All designed SILEX systems successfully self-induced the expression of protein models. In conclusion, Hsp27 system could be considered as a suitable autoinducible system for protein expression due to less metabolic burden, lower variation in the expression level, suitable plasmid and expression stability, and a higher expression level.

Optimized expression of Hfq protein increases Escherichia coli growth

Escherichia coli is a widely used platform for metabolic engineering due to its fast growth and well-established engineering techniques. However, there has been a demand for faster-growing E. coli for higher production of desired substances. Here, to increase the growth of E. coli cells, we optimized the expression level of Hfq protein, which plays an essential role in stress responses. Six variants of the hfq gene with a different ribosome binding site sequence and thereby a different expression level were constructed. When the Hfq expression level was optimized in DH5α, its growth rate was increased by 12.1% and its cell density was also increased by 4.5%. RNA-seq and network analyses revealed the upregulation of stress response genes and metabolic genes, which increases the tolerance against pH changes. When the same strategy was applied to five other E. coli strains (BL21 (DE3), JM109, TOP10, W3110, and MG1655), all their growth rates were increased by 18-94% but not all their densities were increased (- 12 - + 32%). In conclusion, the Hfq expression optimization can increase cell growth rate and probably their cell densities as well. Since the hfq gene is highly conserved across bacterial species, the same strategy could be applied to other bacterial species to construct faster-growing strains.

Alternative Heterologous Expression of L-Arabinose Isomerase from Enterococcus faecium DBFIQ E36 By Residual Whey Lactose Induction

This study reports an alternative strategy for the expression of a recombinant L-AI from Enterococcus faecium DBFIQ E36 by auto-induction using glucose and glycerol as carbon sources and residual whey lactose as inducer agent. Commercial lactose and isopropyl β-D-1-thiogalactopyranoside (IPTG) were also evaluated as inducers for comparison of enzyme expression levels. The enzymatic extracts were purified by affinity chromatography, characterized, and applied in the bioconversion of D-galactose into D-tagatose. L-AI presented a catalytic activity of 1.67 ± 0.14, 1.52 ± 0.01, and 0.7 ± 0.04 U/mL, when expressed using commercial lactose, lactose from whey, and IPTG, respectively. Higher activities could be obtained by changing the protocol of enzyme extraction and, for instance, the enzymatic extract produced with whey presented a catalytic activity of 3.8 U/mL. The specific activity of the enzyme extracts produced using lactose (commercial or residual whey) after enzyme purification was also higher when compared to the enzyme expressed with IPTG. Best results were achieved when enzyme expression was conducted using 4 g/L of residual whey lactose for 11 h. These results proved the efficacy of an alternative and economic protocol for the effective expression of a recombinant L-AI aiming its high-scale production.

Repetitive Fed-Batch: A Promising Process Mode for Biomanufacturing With E. coli

Recombinant protein production with Escherichia coli is usually carried out in fed-batch mode in industry. As set-up and cleaning of equipment are time- and cost-intensive, it would be economically and environmentally favorable to reduce the number of these procedures. Switching from fed-batch to continuous biomanufacturing with microbials is not yet applied as these cultivations still suffer from time-dependent variations in productivity. Repetitive fed-batch process technology facilitates critical equipment usage, reduces the environmental fingerprint and potentially increases the overall space-time yield. Surprisingly, studies on repetitive fed-batch processes for recombinant protein production can be found for yeasts only. Knowledge on repetitive fed-batch cultivation technology for recombinant protein production in E. coli is not available until now. In this study, a mixed feed approach, enabling repetitive fed-batch technology for recombinant protein production in E. coli, was developed. Effects of the cultivation mode on the space-time yield for a single-cycle fed-batch, a two-cycle repetitive fed-batch, a three-cycle repetitive fed batch and a chemostat cultivation were investigated. For that purpose, we used two different E. coli strains, expressing a model protein in the cytoplasm or in the periplasm, respectively. Our results demonstrate that a repetitive fed-batch for E. coli leads to a higher space-time yield compared to a single-cycle fed-batch and can potentially outperform continuous biomanufacturing. For the first time, we were able to show that repetitive fed-batch technology is highly suitable for recombinant protein production in E. coli using our mixed feeding approach, as it potentially (i) improves product throughput by using critical equipment to its full capacity and (ii) allows implementation of a more economic process by reducing cleaning and set-up times.

Effect of by-products from the dairy industry as alternative inducers of recombinant β-galactosidase expression

OBJECTIVE

The aim of the present study was to evaluate the efficiency of lactose derived from cheese whey and cheese whey permeate as inducer of recombinant Kluyveromyces sp. β-galactosidase enzyme produced in Escherichia coli. Two E. coli strains, BL21(DE3) and Rosetta (DE3), were used in order to produce the recombinant enzyme. Samples were evaluated for enzyme activity, total protein content, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis after induction with isopropyl-β-D-1-thiogalactoside (IPTG) (0.05 and 1 mM) and lactose, cheese whey, and cheese whey permeate solutions (1, 10, and 20 g/L lactose) at shake-flask cultivation, and whey permeate solution (10 g/L lactose) at bioreactor scale.

RESULTS

The highest specific activities obtained with IPTG as inducer (0.05 mM) after 9 h of induction, were 23 and 33 U/mg_protein with BL21(DE3) and Rosetta(DE3) strains, respectively. Inductions performed with lactose and cheese whey permeate (10 and 20 g/L lactose) showed the highest specific activities at the evaluated hours, exhibiting better results than those obtained with IPTG. Specific activity of recombinant β-galactosidase using whey permeate (10 g/L lactose) showed values of approximately 46 U/mg_protein after 24-h induction at shake-flask study, and approximately 26 U/mg_protein after 16-h induction at bench bioreactor.

CONCLUSIONS

The induction with cheese whey permeate was more efficient for recombinant β-galactosidase expression than the other inducers tested, and thus, represents an alternative form to reduce costs in recombinant protein production.

Combinatorial strategy towards the efficient expression of lipoxygenase in Escherichia coli at elevated temperatures

Lipoxygenases (LOXs) are a family of non-heme iron oxidoreductases, which catalyze the addition of oxygen into polyunsaturated fatty acids. They have applications in the food and medical industries. In most studies, the soluble expression of LOXs in microbes requires low temperature (< 20 °C), which increases the cost and fermentation time. Achievement of soluble expression in elevated temperatures (> 30 °C) would shorten the production phase, leading to cost-efficient industrial applications. In this study, a combinatorial strategy was used to enhance the expression of soluble LOXs, comprising plasmid stability systems plus optimized carbon source used for auto-induction expression. Plasmid stability analysis suggested that both active partition systems and plasmid-dependent systems were essential for plasmid stability. Among them, the parBCA in it resulted in the enzyme activity increasing by a factor of 2 (498 ± 13 units per gram dry cell weight (U/g-DCW) after 6-h induction). Furthermore, the optimized carbon source, composed of glucose, lactose, and glycerol, could be used as an auto-induction expression medium and effectively improve the total and soluble expression of LOX, which resulted in the soluble expression of LOX increased by 7 times. Finally, the soluble expression of LOX was 11 times higher with a combinatorial strategy that included both optimized plasmid partition and auto-induction medium. Our work provides a broad, generalizable, and combinatorial strategy for the efficient production of heterologous proteins at elevated temperatures in the E. coli system. KEY POINTS : • Soluble expression of lipoxygenase at 30 °C or higher temperatures is industrially beneficial. • Strategies comprise plasmid partition and optimized auto-induction medium with glucose, lactose, and glycerol as carbon source. • Combinatorial strategy further improved LOX soluble expression at 30 °C and 37 °C.

Metabolic engineering of Escherichia coli for 2,3-butanediol production from cellulosic biomass by using glucose-inducible gene expression system

A glucose-inducible gene expression system has been developed using HexR-P_zwf1 of Pseudomonas putida to induce the metabolic pathways. Since the system is controlled by an Entner-Doudoroff pathway (EDP) intermediate, the EDP of Escherichia coli was activated by deleting pfkA and gntR genes. Growth experiment with green fluorescent protein as a reporter indicated that the induction of this system was tightly controlled over a wide range of glucose in E. coli without adding any inducer. 2,3-butanediol (BDO) synthetic pathway genes were expressed by this system in the pfkA-gntR-deleted strain. The resultant engineered strain harbouring this system efficiently produced BDO with a 71% increased titer than the control strain. The strain was also able to produce BDO from a mixture of glucose and xylose which is comparable to glucose alone. Further, the strain produced 11 g/L of BDO at a yield of 0.48 g/g from the hydrolysate of empty palm fruit bunches. This system can also be applied in many other bio-production processes from lignocellulosic biomass.

Scalable, two-stage, autoinduction of recombinant protein expression in E. coli utilizing phosphate depletion

We report the scalable production of recombinant proteins in Escherichia coli, reliant on tightly controlled autoinduction, triggered by phosphate depletion in the stationary phase. The method, reliant on engineered strains and plasmids, enables improved protein expression across scales. Expression levels using this approach have reached as high as 55% of the total cellular protein. The initial use of the method in instrumented fed-batch fermentations enables cell densities of ∼30 gCDW/L and protein titers up to 8.1 ± 0.7 g/L (∼270 mg/gCDW). The process has also been adapted to an optimized autoinduction media, enabling routine batch production at culture volumes of 20 μl (384-well plates), 100 μl (96-well plates), 20 ml, and 100 ml. In batch cultures, cell densities routinely reach ∼5-7 gCDW/L, offering protein titers above 2 g/L. The methodology has been validated with a set of diverse heterologous proteins and is of general use for the facile optimization of routine protein expression from high throughput screens to fed-batch fermentation.

Functional Heterologous Expression of Mature Lipase LipA from Pseudomonas aeruginosa PSA01 in Escherichia coli SHuffle and BL21 (DE3): Effect of the Expression Host on Thermal Stability and Solvent Tolerance of the Enzyme Produced

This study aimed to express heterologously the lipase LipA from Pseudomonas aeruginosa PSA01 obtained from palm fruit residues. In previous approaches, LipA was expressed in Escherichia coli fused with its signal peptide and without its disulfide bond, displaying low activity. We cloned the mature LipA with its truncated chaperone Lif in a dual plasmid and overexpressed the enzyme in two E. coli strains: the traditional BL21 (DE3) and the SHuffle® strain, engineered to produce stable cytoplasmic disulfide bonds. We evaluated the effect of the disulfide bond on LipA stability using molecular dynamics. We expressed LipA successfully under isopropyl β-d-1-thio-galactopyranoside (IPTG) and slow autoinducing conditions. The SHuffle LipA showed higher residual activity at 45 °C and a greater hyperactivation after incubation with ethanol than the enzyme produced by E. coli BL21 (DE3). Conversely, the latter was slightly more stable in methanol 50% and 60% (t½: 49.5 min and 9 min) than the SHuffle LipA (t½: 31.5 min and 7.4 min). The molecular dynamics simulations showed that removing the disulfide bond caused some regions of LipA to become less flexible and some others to become more flexible, significantly affecting the closing lid and partially exposing the active site at all times.

Characterization of a toxin-antitoxin system in Mycobacterium tuberculosis suggests neutralization by phosphorylation as the antitoxicity mechanism

Mycobacterium tuberculosis (Mtb) encodes an exceptionally large number of toxin-antitoxin (TA) systems, supporting the hypothesis that TA systems are involved in pathogenesis. We characterized the putative Mtb Rv1044-Rv1045 TA locus structurally and functionally, demonstrating that it constitutes a bona fide TA system but adopts a previously unobserved antitoxicity mechanism involving phosphorylation of the toxin. While Rv1045 encodes the guanylyltransferase TglT functioning as a toxin, Rv1044 encodes the novel atypical serine protein kinase TakA, which specifically phosphorylates the cognate toxin at residue S78, thereby neutralizing its toxicity. In contrast to previous predictions, we found that Rv1044-Rv1045 does not belong to the type IV TA family because TglT and TakA interact with each other as substrate and kinase, suggesting an unusual type of TA system. Protein homology analysis suggests that other COG5340-DUF1814 protein pairs, two highly associated but uncharacterized protein families widespread in prokaryotes, might share this unusual antitoxicity mechanism.

Xia Yu et al. report the characterization of a toxin-antitoxin system with an unusual mechanism in Mycobacterium tuberculosis. They find that the antitoxin locus Rv1044 encodes an atypical serine protein kinase that phosphorylates the toxin to neutralize toxicity.

Fermentation, purification and immunogenicity of a recombinant tumor multi-epitope vaccine, VBP3

The recombinant multi-epitope vaccine called VBP3 is designed to suppress tumor growth and angiogenesis through targeting both basic fibroblast growth factor (bFGF) and vascular endothelial growth factor A (VEGFA). We are aiming to produce VBP3 vaccine in a large scale and provide sufficient protein for pre-clinical study. High cost and potential toxicity are severe limitations of IPTG and we investigated whether lactose can mediate VBP3 induction. Firstly, we identified the biological characteristics and established a culture bank of VBP3 strains. The best-performing strains were selected and the fermentation mode of medium, bacterial growth and protein expression were optimized in shake flasks. We scaled up the VBP3 production in 10 L bioreactor using lactose as inducer and the protein yield was comparable with IPTG induction. Next, the target protein was purified by nickel-nitrilotriacetic acid (Ni-NTA) affinity chromatography, with a SDS-PAGE purity over 90%. Further, the purified VBP3 vaccine was subcutaneously injected in BALB/c mice and elicited high-titer anti-bFGF (1:32,000) and anti-VEGFA (1:4000) antibodies. Take together, lactose was an applicable inducer for VBP3 production and the eligible product of VBP3 was harvested in the large-scale fermentation, supporting the industrial production and pre-clinical study in the future. The VBP3 vaccine with superior immunogenicity might be used as a potential therapeutic vaccine for tumor treatment.

Development of a Monoclonal Antibody Specific to the IgM Heavy Chain of Bighead Catfish (Clarias macrocephalus): A Biomolecular Tool for the Detection and Quantification of IgM Molecules and IgM+ Cells in Clarias Catfish

Catfish is a commonly-cultivated freshwater fish in Thailand and many Southeast Asian countries. The molecular data obtained for the IgM heavy chain (IgMH) of catfish have been useful for distinguishing monoclonal antibodies (mAbs). A mAb specific to Cμ₁ of the IgMH of catfish (IgMHCμ₁ mAb) was developed in a rabbit model using sequence information from bighead catfish (Clarias macrocephalus). The IgMHCμ₁ mAb strongly recognized the IgM heavy chain of the tested catfish, namely, bighead catfish, African catfish (Clarias gariepinus) and their hybrid (C. macrocephalus × C. gariepinus), in immunological Western blot analysis and competitive ELISAs. Additionally, the IgMHCμ₁ mAb successfully recognized IgM⁺ cells by detecting IgM molecules in both secreted and membrane-bound forms in peripheral blood leukocytes (PBLs). The IgMHCμ₁ mAb was further used to quantify the percentage of IgM⁺ cells among PBLs through flow cytophotometry. The IgM⁺ cell percentages of healthy bighead catfish, African catfish and their hybrid were 38.0–39.9%, 45.6–53.2%, and 58.7–60.0%, respectively. Furthermore, the IgMHCμ₁ mAb showed no cross-reactivity with the IgM of zebrafish. These findings suggest that this mAb can be used as an immunological tool for monitoring the health, immune status, and immune development of cultivated Clarias catfish.

Use of plasmids for expression of proteins from the genus Leishmania in Escherichia coli: current state and perspectives

Leishmaniosis is caused by the protozoa of the genus Leishmania with a wide spectrum of clinical and epidemiological manifestations which are characterized into four clinical groups: cutaneous, mucocutaneous, diffuse cutaneous, and visceral. American visceral leishmaniosis (AVL) or visceral leishmaniosis (VL) has been known as the most severe form of the disease. However, despite the growing number of people exposed to the infection risk and the great effort done by the scientific community worldwide to significantly increase the knowledge about these diseases, there is no vaccine capable of preventing VL in humans. In this short review, we present some of the plasmids used for the expression of recombinant protein by Escherichia coli strains used mainly for the second generation of vaccines for leishmaniosis. It can be emphasized that currently, these vectors and hosts play an important role in developing vaccine strategies against the disease. Indeed, use of the E. coli BL21 (DE) strain is remarkable mainly due to its characteristics for being a stable protein producer as well as the use of histidine tags for antigen purification. KEY POINTS: • Plasmid vectors and E. coli will continue being important for studies about leishmaniosis. • Protein purification exploiting histidine tags is a key technique.