Mesoporous Non-stacked Graphene-receptor Sensor for Detecting Nerve Agents

Synthesis and characterization of nitrogen-doped-MWCNT@cobalt oxide for nerve agent simulant detection

Organophosphorus nerve agents are toxic compounds that disrupt neuromuscular transmission by inhibiting the neurotransmitter enzyme, acetylcholinesterase, leading to rapid death. A hybrid composite was synthesized using a hydrothermal process for the early detection of dimethyl methyl phosphonate (DMMP), a simulant of the G-series nerve agent, sarin. Quartz crystal microbalance (QCM) and surface acoustic wave (SAW) sensors were used as detectors. Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs), cobalt oxide (Co3O4), and N-MWCNT@Co3O4 were compared to detect DMMP concentrations of 25-150 ppm. At 25 ppm, the differential frequencies (Δf) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors were 5.8, 2.3, and 99.5 Hz, respectively. The selectivity results revealed a preference for the DMMP rather than potential interference. The coefficients of determination (R2) of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 25-150 ppm DMMP were 0.983, 0.986, and 0.999, respectively. The response times of the N-MWCNT, Co3O4, and N-MWCNT@Co3O4 sensors for detecting 100 ppm DMMP were 25, 27, and 34 s, respectively, while the corresponding recovery times were 85, 105, and 181 s. The repeatability results revealed the reversible adsorption and desorption phenomena for the fixed DMMP concentration of 100 ppm. These unique findings show that synthesized materials can be used to detect organophosphorus nerve agents.

Graphene oxide decreases the abundance of nitrogen cycling microbes and slows nitrogen transformation in soils

Graphene oxide (GO) has been widely used in many applications due to its excellent properties. Given the extensive production and use of this nanomaterial, its release into the environment is inevitable. However, little is known about the effects of GO on microbial nitrogen transformation and the related processes after GO enters the soil environment. The present study showed that GO significantly reduced soil microbial biomass and caused a decline in microbial diversity after the soils were subjected to various GO concentrations (10, 100, and 1000 mg kg^-1) for 4 months. Among them, the abundances of nitrogen transformation related bacteria such as Firmicutes, Nitrospirota, Proteobacteria, Planctomycetota, and Cyanobacteria were significantly decreased with GO incubation. Among the enzymes that are related to nitrogen transformation, nitrate reductase was the most sensitive even at low concentrations of GO, followed by ammonia monooxygenase and urease, which were reduced by 13-31%, 5-26%, and 9-19% respectively, than those of the control. We found that high concentrations of GO significantly increased the retention of soil urea by 32-59%, and the contents of ammonium and nitrate were 22-28% and 55-69% lower compared to those of the control, respectively. Moreover, the response of most of the indicators in the above process to multilayer GO was more significant than that to single layer GO. Overall, this study provides new insights into the comprehensive understanding of GO's impacts on the soil nitrogen cycle.

Graphene for Biosensing Applications in Point-of-Care Testing

Graphene and graphene-related materials (GRMs) exhibit a unique combination of electronic, optical, and electrochemical properties, which make them ideally suitable for ultrasensitive and selective point-of-care testing (POCT) devices. POCT device-based applications in diagnostics require test results to be readily accessible anywhere to produce results within a short analysis timeframe. This review article provides a summary of methods and latest developments in the field of graphene and GRM-based biosensing in POCT and an overview of the main applications of the latter in nucleic acids and enzymatic biosensing, cell detection, and immunosensing. For each application, we discuss scientific and technological advances along with the remaining challenges, outlining future directions for widespread use of this technology in biomedical applications.

Conjugated Polymer-Based Electrical Sensor for Ultratrace Vapor-Phase Detection of Nerve Agent Mimics

Considering the vital need to strengthen the national security emanating from chemical threats, a low-cost, portable ultrasensitive electrical sensor for real-time monitoring of diethylchlorophosphate (DCP) (nerve gas mimic) has been developed. The device consists of a "simple to be fabricated" two-terminal resistor and an electronic combinational circuit for rapid onsite detection of lethal nerve gas vapors with high degree of accuracy in milliseconds. This device is a smart readout electronic model that detects ultratrace DCP vapors by bright visual alerts from light-emitting diode (LED) and loud alarm signal without the need for employing a sophisticated instrument. To obtain high sensitivity and discriminating response, a novel amine-functionalized conjugated polymer (CP) is designed as a sensory channel material for two-terminal sensor. The low-powered poly(3-(9,9-dioctyl-9H-fluoren-2-yl)benzene-1,2-diamine) (PFPDA) fabricated two-terminal electrical sensor is tested at ambient conditions, which shows excellent sensitivity toward nerve gas mimic DCP, with a rapid response in 3 s and a very low limit of detection (LOD) of 5.88 ppb. The amine moiety of PFPDA CP plays a vital role in redox interaction between the semiconductor CP and organophosphates, which ultimately leads to the amplified current signal. The redox interactions occurring among the organophosphate analytes and the amine functional group on the PFPDA backbone provided insights into the mechanism of sensing, which formed the basis of the excellent sensitivity and discriminating ability of this sensor device. The newly designed PFPDA CP-based portable electrical sensor device demonstrates a key contribution in the field of portable electronics for defense safety and environmental monitoring applications.