Applicability of drinking water treatment residue for lake restoration in relation to metal/metalloid risk assessment

High efficiency of drinking water treatment residual-based sintered ceramsite in biofilter for domestic wastewater treatment

Aluminum (Al)-based drinking water treatment residue (DWTR) has often been attempted to be recycled as dominant ingredient to produce sintered ceramsite for water treatment. This study aimed to determine the long-term performance of DWTR-based ceramsite in treating domestic wastewater based on a 385-d biofilter test and by using physicochemical, metagenomic, and metatranscriptomic analyses. The results showed that the ceramsite-packed biofilter exhibited high and stable capability in removing phosphorus (P) and chemical oxygen demand (COD), with removal efficiencies of 92.6 ± 3.97% and 81.1 ± 14.0% for total P and COD, respectively; moreover, 88-100% of ammonium-nitrogen (N) was normally converted, and the total N removal efficiency reached 80-86% under proper aeration. Further analysis suggested that the forms of the removed P in the ceramsite were mainly NH4F- and NaOH-extractable. Microbial communities in the ceramsite biofilter exhibited relatively high activity. Typically, various organic matter degradation-related genes (e.g., hemicellulose and starch degradations) were enriched, and a complete N-cycling pathway was established, which is beneficial for enriching microbes involved in ammonium-N conversion, especially Candidatus Brocadia, Candidatus Jettenia, Nitrosomonas, and Nitrospira. In addition, the structures of the ceramsite had high stability (e.g., compressive strength and major compositions). The ceramsites showed limited metal and metalloid pollution risks and even accumulated copper from the wastewater. These results demonstrate the high feasibility of applying ceramsite prepared from Al-based DWTR for water treatment.

A model for predicting reduction in mobile phosphorus of lake sediment by aluminum drinking water treatment residuals

Drinking water treatment residual (DWTR) derived from flocculation and sedimentation of raw water using aluminum coagulants is a valuable environmental remediation byproduct capable of inactivating phosphorus (P). However, no generalizable model exists in the literature to describe reduction of releasable (mobile) P in lake sediment as a result of DWTR addition. The reduction of mobile P (sum of labile P and reductant soluble P) was investigated in over 100 sub-samples using five sediment samples from two lakes and three DWTRs from different water treatment plants. A consistent relationship was determined across a range of mobile P contents (0.23 g/m²/cm to 0.92 g/m²/cm, or 15.8 to 186.1 µg/g DW) and DWTRs. The relationship was best described as a function of the mobile P content of the sediment and the oxalate-extractable aluminum content of the DWTR. An empirical model was developed to predict the immediate reduction in mobile P following the addition of DWTR containing aluminum. This model was validated using two additional lake sediments and one additional DWTR (R² = 0.995). Thus, the immediate inactivation of P in lake sediment following DWTR addition can be predicted with this model, which can be used with internal P loading or other water quality goals to determine an appropriate DWTR dose. Further recommendations were made about dosing DWTRs for lake restoration, allowing practitioners to use DWTR to inactivate P in lake sediment without conducting individual sorption experiments.

Drinking water treatment residual as a ballast to sink Microcystis cyanobacteria and inactivate phosphorus in tropical lake water

The combination of a low dose of coagulant with a ballast that can inactive phosphorus (P) in lake sediment-a technique known as "flock and lock"-is one method for restoration of eutrophic lakes. The effectiveness of a drinking water treatment residual (DWTR) as a ballast in flock and lock was assessed using assays of eutrophic lake water from Thailand dominated by Microcystis aeruginosa cyanobacteria colonies by measuring changes in chlorophyll-a, pH, and zeta potential. P sorption isotherms were developed from long-term batch equilibrium experiments; desorption of nutrients and metals was assessed via leaching experiments; and morphological changes to cellular structure were assessed using scanning electron microscopy. Results showed that combining DWTR with a low dose of aluminum sulfate (0.6-4.0 mg Al/L) effectively sank 74-96% of Microcystis, with DWTR dose (50-400 mg/L), initial chlorophyll-a concentration (92-976 µg/L), pH (7.4-9.3), and alkalinity (99-108 ppm CaCO₃) identified as factors significantly associated with sinking efficacy. P sorption capacity of the DWTR (7.12 mg/g) was significantly higher than a local soil (0.33 mg/g), enabling the DWTR to inactivate P in lake sediment. Desorption of Al, Fe, Ca and N from the DWTR was estimated to contribute to a marginal increase in concentrations of those compounds in the water column of a small shallow lake (1.2, 0.66, 53.4, and 0.07 µg/L, respectively) following a simulated application. Therefore, pre-treated DWTRs may be a viable alternative ballast in the flock and lock approach to lake restoration, supplementing or replacing modified local soils or lanthanum modified clays.

Washing and Heat Treatment of Aluminum-Based Drinking Water Treatment Residuals to Optimize Phosphorus Sorption and Nitrogen Leaching: Considerations for Lake Restoration

Drinking water treatment residuals (DWTRs) generated during drinking water treatment have been proposed for use in lake restoration as a solid-phase sorbent to inactivate phosphorus (P) in lake sediment. However, treatments that minimize leaching of nitrogen (N) and optimize P sorption capacity may be necessary prior to use. This study assessed seven different treatment methods, including washing and heat treatments at different temperatures and with and without oxygen limitation, among two DWTRs from Thailand. Results showed that oxygen-limited heat treatment at 600 °C substantially reduced N leaching (<0.2 mg/kg TKN) while also improving P sorption capacity (increase of 18–32% compared to untreated DWTR) to a maximum of 45.7 mg P/kg. Washing with deionized water reduced N leaching if a sufficient volume was used but did not improve P sorption. Heating at 200 °C with or without the presence of oxygen did not improve N leaching or P sorption. Regression of P sorption parameters from a two-surface Langmuir isotherm against physio-chemical properties indicated that oxalate-extractable (i.e., amorphous) aluminum and iron were significantly associated with total P sorption capacity (R2 = 0.94), but micropores and oxalate-extractable P modulated the P sorption from high-affinity to low-affinity mechanisms. In conclusion, this study confirmed the importance of amorphous aluminum in DWTRs for inactivating P, and the results suggest that high-temperature treatment under oxygen-limited conditions may be the most reliable way to optimize DWTRs for environmental remediation applications.

The Physiological and Biochemical Responses of Daphnia magna to Dewatered Drinking Water Treatment Residue

There have been widespread attempts to recycle drinking water treatment residue (DWTR) after dewatering for environmental remediation, which is beneficial for both the environment and the economy. The directly discharged DWTR without dewatering to natural water bodies, however, was reported to show signs of chronic toxicity to Daphnia magna (D. magna), a typical zooplankton in the aquatic environment. This study comprehensively assessed the effect of dewatered DWTR on the physiological and biochemical characteristics of D. magna based on acute and chronic toxicity tests. The results showed that the survival, growth, reproduction, body morphology of offspring, and the antioxidant enzymes of D. magna were not affected by the dewatered DWTR. These physiological and biochemical indexes also had no undesirable changes for the DWTR-amended sediments (with ratios of 0–50%) incubated for 10 and 180 d; the growth and reproduction were even promoted when D. magna was exposed to 5000 mg-sediment L⁻¹, which may be due to the extra nutrients supplied by the amended sediments for the animals. The results demonstrated that by contrast with the directly discharged DWTR without dewatering, the dewatered DWTR could be safe to D. magna. Further analysis suggested that heavy metals (Pb, Ni, Cu, Cr, and Zn) with relatively low concentrations and high stability could be the main reasons leading to the high safety of the dewatered DWTR. Overall, dewatered DWTR can be considered a non-hazardous material for zooplankton.

A simple method to improve the adsorption properties of drinking water treatment residue by lanthanum modification

The loading of La can substantially enhance the adsorption capability of drinking water treatment residue (DWTR) for better recycling. Normally, the modification was based on incubation of DWTR and La solution at a certain ratio, following by solid-liquid separation and drying processes. This study attempted to simplify La loading procedures by adopting high ratio of DWTR and La solution to eliminate the solid-liquid separation, aiming to promote the potential actual production. According to the results of the short- (2 d) and long-term (30 d) P adsorption tests, the N₂ gas sorption and desorption analysis, the X-ray photoelectron spectroscopy analysis, and the metal fractionation, the substantial enhanced adsorption capability of the modified DWTR was maintained and the La loading mechanisms to DWTR changed little after eliminating solid-liquid separation processes during modification; typically, La loading increased the initial P adsorption rates from 1.00 (raw DWTR) to 6.08 and 6.03 mg g^-1 d^-1 for the modified DWTR with and without the separation processes. Furthermore, the DWTR before and after modification had little unfavorable effect on the survival of snail Bellamya aeruginosa, while eliminating the separation processes tended to reduce the bioavailability of Al, Fe, and La in the modified DWTR. These results demonstrated that solid-liquid separation was not the key step for DWTR modification and that the developed simple modification method was feasible for La loading to DWTR, promoting the beneficial recycling in environmental remediation.