Power ultrasound in organic synthesis: moving cavitational chemistry from academia to innovative and large-scale applications

JEDI: A versatile code for strain analysis of molecular and periodic systems under deformation

Stretching or compression can induce significant energetic, geometric, and spectroscopic changes in materials. To fully exploit these effects in the design of mechano- or piezo-chromic materials, self-healing polymers, and other mechanoresponsive devices, a detailed knowledge about the distribution of mechanical strain in the material is essential. Within the past decade, Judgement of Energy DIstribution (JEDI) analysis has emerged as a useful tool for this purpose. Based on the harmonic approximation, the strain energy in each bond length, bond angle, and dihedral angle of the deformed system is calculated using quantum chemical methods. This allows the identification of the force-bearing scaffold of the system, leading to an understanding of mechanochemical processes at the most fundamental level. Here, we present a publicly available code that generalizes the JEDI analysis, which has previously only been available for isolated molecules. Now, the code has been extended to two- and three-dimensional periodic systems, supramolecular clusters, and substructures of chemical systems under various types of deformation. Due to the implementation of JEDI into the Atomic Simulation Environment, the JEDI analysis can be interfaced with a plethora of program packages that allow the calculation of electronic energies for molecular systems and systems with periodic boundary conditions. The automated generation of a color-coded three-dimensional structure via the Visual Molecular Dynamics program allows insightful visual analyses of the force-bearing scaffold of the strained system.

High-Precision Tailored Polymer Molecular Weights for Specific Photovoltaic Applications through Ultrasound-Induced Simultaneous Physical and Chemical Events

It is highly challenging to reproducibly prepare semiconducting polymers with targeted molecular weight tailored for next-generation photovoltaic applications. Once such an easily accessible methodology is established, which can not only contribute to overcome the current limitation of the statistically determined nature of semiconducting polymers, but also facilitate rapid incorporation into the broad synthetic chemists' toolbox. Here, we describe a simple yet robust ultrasonication-assisted Stille polymerization for accessing semiconducting polymers with high-precision tailored molecular weights (from low to ultrahigh molecular weight ranges) while mitigating their interbatch variations. We propose that ultrasound-induced simultaneous physical and chemical events enable precise control of the semiconducting polymers' molecular weights with high reproducibility to satisfy all the optical/electrical and morphological demands of diverse types of high-performance semiconducting polymer-based devices; as demonstrated in in-depth experimental screenings in applications of both organic and perovskite photovoltaics. We believe that this methodology provides a fast development of new and existing semiconducting polymers with the highest-level performances possible on various photovoltaic devices.

Evaluation of multiscale mechanisms of ultrasound-assisted extraction from porous plant materials: Experiment and modeling on this intensified process

Ultrasound-assisted extraction (UAE) is an intensified mass transfer process, which can utilize natural resources effectively, but still lacks detailed mechanisms for multiscale effects. This study investigates the mass transfer mechanisms of UAE combined with material's pore structure at multiscale. Porous material was prepared by roasting green coffee beans (GCB) at 120 °C (RCB120) and 180 °C (RCB180), and their UAE efficiency for phytochemicals (caffeine, trigonelline, chlorogenic acid, caffeic acid) were evaluated by experiment and modeling. Besides, the physicochemical properties, mass transfer kinetics, and multi-physical field simulation were studied. Results indicated that positive synergy effects on extraction existed between ultrasound and material's pore structure. Higher mass transfer coefficients of UAE (GCB 0.16 min-1, RCB120 0.38 min-1, RCB180 0.46 min-1) was achieved with higher total porosity (4.47 %, 9.17 %, 13.52 %) and connected porosity (0 %, 3.79 %, 5.98 %). Moreover, simulation results revealed that micro acoustic streaming and pressure difference around particles were the main driving force for enhancing mass transfer, and the velocity (0.29-0.36 m/s) increased with power density (0.64-1.01 W/mL). The microscale model proved that increased yield from UAE-RCB was attributed to internal convection diffusion within particles. This study exploited a novel benefit of ultrasound on extraction and inspired its future application in non-thermal food processing.

Thiourea as Bifunctional Hydrogen Bond Donor and Brønsted Base Catalyst for Green One-Pot Synthesis of 2-Aryl/Heteroaryl/Styryl Benzothiazoles in the Aqueous Medium under Ultrasound Irradiation

A green organocatalysis cascade strategy using thiourea in catalytic amounts as both a hydrogen bond donor and a Brønsted base bifunctional catalyst was utilized to synthesize a series of 2-aryl/heteroaryl/styryl benzothiazole derivatives. This strategy involved an ultrasound-irradiated one-pot two-component reaction between substituted aldehydes and 2-amino thiophenols in an aqueous medium at 60 °C, using air as an oxidant. At the gram-scale, this protocol yielded 87% of the desired product, making it suitable for production at a larger scale. This green and mild protocol offers excellent yields, cost-effectiveness, atom economy, step economy, and a simple operation that does not require extra purification steps. Furthermore, the catalyst is easily recoverable and can be used for up to five cycles without a significant loss of any activity.

A Review on Covalent Organic Frameworks as Artificial Interface Layers for Li and Zn Metal Anodes in Rechargeable Batteries

Li and Zn metals are considered promising negative electrode materials for the next generation of rechargeable metal batteries because of their non-toxicity and high theoretical capacity. However, the uneven deposition of metal ions (Li+ , Zn2+ ) and the uncontrolled growth of dendrites result in poor electrochemical stability, unsatisfactory cycle life, and rapid capacity decay of batteries assembled with Li and Zn electrodes. Owing to the unique internal directional channels and abundant redox active sites of covalent organic frameworks (COFs), they can be used to promote uniform deposition of metal ions during stripping/electroplating through interface modification strategies, thereby inhibiting dendrite growth. COFs provide a new perspective in addressing the challenges faced by the anodes of Li metal batteries and Zn ion batteries. This article discusses the stability and types of COFs, and summarizes some novel COF synthesis methods. Additionally, it reviews the latest progress and optimization methods of using COFs for metal anodes to improve battery performance. Finally, the main challenges faced in these areas are discussed. This review will inspire future research on metal anodes in rechargeable batteries.

Shade of Innovative Food Processing Techniques: Potential Inducing Factors of Lipid Oxidation

With increasing environmental awareness and consumer demand for high-quality food products, industries are strongly required for technical innovations. The use of various emerging techniques in food processing indeed brings many economic and environmental benefits compared to conventional processes. However, lipid oxidation induced by some "innovative" processes is often "an inconvenient truth", which is scarcely mentioned in most studies but should not be ignored for the further improvement and optimization of existing processes. Lipid oxidation poses a risk to consumer health, as a result of the possible ingestion of secondary oxidation products. From this point of view, this review summarizes the advance of lipid oxidation mechanism studies and mainly discloses the shade of innovative food processing concerning lipid degradation. Sections involving a revisit of classic three-stage chain reaction, the advances of polar paradox and cut-off theories, and potential lipid oxidation factors from emerging techniques are described, which might help in developing more robust guidelines to ensure a good practice of these innovative food processing techniques in future.

Mapping of 20 L capacity ultrasonic reactor using cavitation activity meter and dye degradation

Mapping of a novel 20 L capacity ultrasonic (US) reactor having a total of 44 transducers was done by measuring the local cavitation intensity using a cavitation activity meter at different horizontal planes and subsequent validation based on dye degradation. A fixed frequency of 33 kHz and temperature of 30 °C was used during the mapping performed at two different power levels of 250 W and 400 W. In addition, the mapping of specific plane 2 was also performed with transducers operating on walls 1 and 3, while switching the transducers on walls 2 and 4 off and vice versa so as to establish the role of using multiple transducers. Degradation of RO4 dye was also measured at the plane 2 at various powers as 250 W, 400 W, and 1000 W. The degradation of the RO4 dye directly correlated to the cavitation intensity measured at the various location inside the US reactor. The average cavitation intensity was 265.38, 317.25, 185, and 300.5 Cavins for power dissipations of 250 W, 400 W, 250 W (wall 1 and 3 transducers in operation), and 400 W (wall 2 and 4 transducers in operation), respectively. Correspondingly, the average degradation was 10.35 %, 13.03 %, 5.52 %, and 8.9 % for same sequence of operational power and transducers. The investigation amply illustrated dependency of the cavitational activity on the location, power dissipation, and operating mode elucidating important design related information useful for scale up of sonochemical reactors.

Recent progress on sonochemical production for the synthesis of efficient photocatalysts and the impact of reactor design

Sonochemical-assisted synthesis has flourished recently for the design of photocatalysts. The main power used is ultrasound that allows the nanomaterials shape and size modification and control. This review highlights the effect in formation mechanism by ultrasound application and the most common photocatalysts that were prepared via sonochemical techniques. Moreover, the challenge for the suitable reactor design for the synthesis of materials or for their photocatalytic evaluation is discussed since the most prominent reactor systems, batch, and continuous flow, has both advantages and drawbacks. This work summarises the significance of sonochemical synthesis for photocatalytic materials as a green technology that needs to be further investigated for the preparation of new materials and the scale up of developed reactor systems to meet industrial needs.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Beyond Solvothermal: Alternative Synthetic Methods for Covalent Organic Frameworks

Covalent organic frameworks (COFs) are crystalline porous organic materials that hold a wealth of potential applications across various fields. The development of COFs, however, is significantly impeded by the dearth of efficient synthetic methods. The traditional solvothermal approach, while prevalent, is fraught with challenges such as complicated processes, excessive energy consumption, long reaction times, and limited scalability, rendering it unsuitable for practical applications. The quest for simpler, quicker, more energy-efficient, and environmentally benign synthetic strategies is thus paramount for bridging the gap between academic COF chemistry and industrial application. This Review provides an overview of the recent advances in alternative COF synthetic methods, with a particular emphasis on energy input. We discuss representative examples of COF synthesis facilitated by microwave, ultrasound, mechanic force, light, plasma, electric field, and electron beam. Perspectives on the advantages and limitations of these methods against the traditional solvothermal approach are highlighted.

Synthesis and Biological Studies of Benzo[b]furan Derivatives: A Review from 2011 to 2022

The importance of the benzo[b]furan motif becomes evident in the remarkable results of numerous biological investigations, establishing its potential as a robust therapeutic option. This review presents an overview of the synthesis of and exhaustive biological studies conducted on benzo[b]furan derivatives from 2011 to 2022, accentuating their exceptional promise as anticancer, antibacterial, and antifungal agents. Initially, the discussion focuses on chemical synthesis, molecular docking simulations, and both in vitro and in vivo studies. Additionally, we provide an analysis of the intricate interplay between structure and activity, thereby facilitating comparisons and profoundly emphasizing the applications of the benzo[b]furan motif within the realms of drug discovery and medicinal chemistry.

The Application of Microwaves, Ultrasounds, and Their Combination in the Synthesis of Nitrogen-Containing Bicyclic Heterocycles

The use of alternative energy sources, such as microwaves (MW) or ultrasounds (US), and their mutual cross-combination have been widely described in the literature in the development of new synthetic methodologies in organic and medicinal chemistry. In this review, our attention is focused on representative examples, reported in the literature in the year range 2013-2023 of selected N-containing bicyclic heterocycles, with the aim to highlight the advantages of microwave- and ultrasound-assisted organic synthesis.

Synthesis of Imidazole-Based Molecules under Ultrasonic Irradiation Approaches

Imidazole-based compounds are a series of heterocyclic compounds that exhibit a wide range of biological and pharmaceutical activities. However, those extant syntheses using conventional protocols can be time-costly, require harsh conditions, and result in low yields. As a novel and green technique, sonochemistry has emerged as a promising method for organic synthesis with several advantages over conventional methods, including enhancing reaction rates, improving yields, and reducing the use of hazardous solvents. Contemporarily, a growing body of ultrasound-assisted reactions have been applied in the preparation of imidazole derivatives, which demonstrated greater benefits and provided a new strategy. Herein, we introduce the brief history of sonochemistry and focus on the discussion of the multifarious approaches for the synthesis of imidazole-based compounds under ultrasonic irradiation and its advantages in comparison with conventional protocols, including typical name-reactions and various sorts of catalysts in those reactions.

Ultrasound-assisted Peptide Nucleic Acids synthesis (US-PNAS)

Herein, we developed an innovative and easily accessible solid-phase synthetic protocol for Peptide Nucleic Acid (PNA) oligomers by systematically investigating the ultrasonication effects in all steps of the PNA synthesis (US-PNAS). When compared with standard protocols, the application of the so-obtained US-PNAS approach succeeded in improving the crude product purities and the isolated yields of different PNA, including small or medium-sized oligomers (5-mer and 9-mer), complex purine-rich sequences (like a 5-mer Guanine homoligomer and the telomeric sequence TEL-13) and longer oligomers (such as the 18-mer anti-IVS2-654 PNA and the 23-mer anti-mRNA 155 PNA). Noteworthy, our ultrasound-assisted strategy is compatible with the commercially available PNA monomers and well-established coupling reagents and only requires the use of an ultrasonic bath, which is a simple equipment generally available in most synthetic laboratories.

Preparing high-concentration individualized carbon nanotubes for industrial separation of multiple single-chirality species

Industrial production of single-chirality carbon nanotubes is critical for their applications in high-speed and low-power nanoelectronic devices, but both their growth and separation have been major challenges. Here, we report a method for industrial separation of single-chirality carbon nanotubes from a variety of raw materials with gel chromatography by increasing the concentration of carbon nanotube solution. The high-concentration individualized carbon nanotube solution is prepared by ultrasonic dispersion followed by centrifugation and ultrasonic redispersion. With this technique, the concentration of the as-prepared individualized carbon nanotubes is increased from about 0.19 mg/mL to approximately 1 mg/mL, and the separation yield of multiple single-chirality species is increased by approximately six times to the milligram scale in one separation run with gel chromatography. When the dispersion technique is applied to an inexpensive hybrid of graphene and carbon nanotubes with a wide diameter range of 0.8-2.0 nm, and the separation yield of single-chirality species is increased by more than an order of magnitude to the sub-milligram scale. Moreover, with present separation technique, the environmental impact and cost of producing single-chirality species are greatly reduced. We anticipate that this method promotes industrial production and practical applications of single-chirality carbon nanotubes in carbon-based integration circuits.

Ultrasound-Assisted 1,3-Dipolar Cycloadditions Reaction Utilizing Ni-Mg-Fe LDH: A Green and Sustainable Perspective

Ultrasound-assisted synthesis of novel pyrazoles using Ni-Mg-Fe LDH as a catalyst in cyclopentyl methyl ether (CPME) is introduced. Different LDHs were tested as a catalyst for the synthesis of pyrazoles via a 1,3-dipolar cycloaddition reaction. Among them, Ni-Mg-Fe LDH was the superior catalyst for this reaction. This protocol offered high yields, a short reaction time, and a green solvent, and with the reuse of this catalyst six times with the same activity, it could be regarded as an ecofriendly, greener process. The NiMgFe LDH catalyst with the smallest particle size (29 nm) and largest surface area showed its superior efficacy for the 1,3 dipolar cycloaddition rection and can be successfully used in up to six catalytic cycles with little loss of catalytic activity. A plausible mechanism for this reaction over the Ni-Mg-Fe LDH is proposed.

Recent Developments in Chemical Derivatization of Microcrystalline Cellulose (MCC): Pre-Treatments, Functionalization, and Applications

Microcrystalline Cellulose (MCC) is an isolated, colloidal crystalline portion of cellulose fibers, and it is a valuable alternative to non-renewable fossil-based materials. It is used for a large plethora of different fields, such as composites, food applications, pharmaceutical and medical developments, and cosmetic and material industries. The interest of MCC has also been driven by its economic value. In the last decade, particular attention has been driven to the functionalization of its hydroxyl groups to expand the field of applications of such biopolymer. Herein, we report and describe several pre-treatment methods that have been developed to increase the accessibility of MCC by breaking its dense structure allowing further functionalization. This review also collects the results that have appeared in the literature during the last two decades on the utilization of functionalized MCC as adsorbents (dyes, heavy metals, and carbon dioxide), flame retardants, reinforcing agents, energetic materials, such as azide- and azidodeoxy-modified, and nitrate-based cellulose and biomedical applications.

Wittig and Wittig-Horner Reactions under Sonication Conditions

Carbonyl olefinations are among the most important organic syntheses that form C=C bonds, as they usually have high yields and in addition offer excellent stereoselectivity. Due to these advantages, carbonyl olefinations have important pharmaceutical and industrial applications. These reactions contain an additional step of an α-functionalized carbanion to an aldehyde or ketone to produce alkenes, but syntheses performed using metal carbene complexes are also known. The Wittig reaction is an example of carbonyl olefination, one of the best ways to synthesize alkenes. This involves the chemical reaction between an aldehyde or ketone with a so-called Wittig reagent, for instance phosphonium ylide. Triphenylphosphine-derived ylides and trialkylphosphine-derived ylides are the most common phosphorous compounds used as Wittig reagents. The Wittig reaction is commonly involved in the synthesis of novel anti-cancer and anti-viral compounds. In recent decades, the use of ultrasound on the Wittig reaction (and on different modified Wittig syntheses, such as the Wittig-Horner reaction or the aza-Wittig method) has been studied as a green synthesis. In addition to the advantage of green synthesis, the use of ultrasounds in general also improved the yield and reduced the reaction time. All of these chemical syntheses conducted under ultrasound will be described further in the present review.

Analysis of dynamic acoustic resonance effects in a sonicated gas-liquid flow microreactor

In this work, we characterize acoustic resonance phenomena occurring between gas bubbles in a segmented gas-liquid flow in a microchannel irradiated with a frequency around 500 kHz. A large acoustic amplitude can be reached, leading to gas-liquid interface deformation, atomization of micrometer sized droplets, and cavitation. A numerical approach combining an acoustic frequency-domain solver and a Lagrangian Surface-Evolver solver is introduced to predict the acoustic deformation of gas-liquid interfaces and the dynamic acoustic magnitude. The numerical approach and its assumptions were validated with experiments, for which a good agreement was observed. Therefore, this numerical approach allows to provide a description and an understanding of the acoustic nature of these phenomena. The acoustic pressure magnitude can reach hundreds of kPa to tens of MPa, and these values are consistent with the observation of atomization and cavitation in the experiments. Furthermore, volume of fluid simulations were performed to predict the atomization threshold, which was then related to acoustic resonance. It is found that dynamic acoustic resonance gives rise to atomization bursts at the gas bubble surface. The presented approach can be applied to more complex acoustic fields involving more complex channel geometries, vibration patterns, or two-phase flow patterns.

Electro-mechanochemical approach towards the chloro sulfoximidations of allenes under solvent-free conditions in a ball mill

An electro-mechanochemical protocol for the synthesis of vinylic sulfoximines has been developed. Utilising mechanochemically strained BaTiO₃ nanoparticles, the catalytic active system is generated in situ by the reduction of copper(II) chloride. Various combinations of electron-donating and -withdrawing groups are tolerated, and the approach leads to products with difunctionalised double bonds in good to excellent yields. Attempts to add a sulfoximidoyl chloride to an alkyne proved difficult. Additions of a sulfonyl iodide to allenes and alkynes proceeded smoothly in the presence of silica gel without the need for activation by a piezoelectric material.

Palladium immobilized on guanidine functionalized magnetic nanoparticles: a highly effective and recoverable catalyst for ultrasound aided Suzuki–Miyaura cross-coupling reactions

The Fe3O4@SiO2-TCT-Gua-Pd catalyst anchored with guanidine moiety on Fe3O4 nanoparticles was synthesised for Suzuki–Miyaura cross coupling reaction.

Crystallization of lipids and lipid emulsions treated by power ultrasound: A review

The actual food system with fat is always complex and fat crystal and fat crystal networks have important effects on the physical properties of food. Recently, power ultrasound (PU) had been widely recognized as an auxiliary technology of fat crystallization to modify food properties. This review expounded on the mechanism of ultrasonic crystallization, and summarized effects of various factors in the process of ultrasonic treatment on fat crystallization. Based on the above, combined with the application of ultrasound in emulsions, the ultrasonic fat crystallization effect in the emulsion system was judged and described. Research results indicated that PU could shorten the induction time of crystallization, accelerate the formation of crystal nuclei, and change the polymorphism of fat crystals. The product treated by PU formed smaller and more uniform crystals to produce a more viscoelastic fat crystal network. In emulsion systems, ultrasonic treatments showed the same effect, but the effect of ultrasonic crystallization on the emulsion stability was different due to fat crystals in different emulsion systems. Meanwhile, the importance of ultrasonic crystallization in lipid emulsions was emphasized, thus ultrasonic crystallization had great potential in emulsion systems.

Process intensification in continuous flow organic synthesis with enabling and hybrid technologies

Industrial organic synthesis is time and energy consuming, and generates substantial waste. Traditional conductive heating and mixing in batch reactors is no longer competitive with continuous-flow synthetic methods and enabling technologies that can strongly promote reaction kinetics. These advances lead to faster and simplified downstream processes with easier workup, purification and process scale-up. In the current Industry 4.0 revolution, new advances that are based on cyber-physical systems and artificial intelligence will be able to optimize and invigorate synthetic processes by connecting cascade reactors with continuous in-line monitoring and even predict solutions in case of unforeseen events. Alternative energy sources, such as dielectric and ohmic heating, ultrasound, hydrodynamic cavitation, reactive extruders and plasma have revolutionized standard procedures. So-called hybrid or hyphenated techniques, where the combination of two different energy sources often generates synergistic effects, are also worthy of mention. Herein, we report our consolidated experience of all of these alternative techniques.

Utilisation of Pectins Extracted from Orange Peels by Non Conventional Methods in the Formation of Edible Films in the Presence of Herbal Infusions

Edible films of three high methoxy pectins (DE: 70–75%) in the presence of dittany and anise infusions were studied. Apart from a commercial one, two more pectins, selected by their yield and DE from preliminary experiments on pectin extraction from orange peels using ultrasound- and microwave-assisted extraction or a combination of both, were used. Extracted pectins were darker, less surface active and had lower [η] and absolute zeta values. All three pectin solutions were Newtonian. Furthermore, all films had statistically the same thickness (~40 μm) and moisture content (~25.2%). For the same herbal infusion, all pectins resulted in films with the same density (~1.01 and ~1.19 g/cm3 for dittany and anise films, respectively). Values of 2–4.65 N and 76.62–191.80 kPa, for maximum force and modulus, respectively, were reported. The commercial pectin film with anise was the stronger, whereas that with dittany, the stiffer. Total phenolics content (TPC) and antioxidant activity (SA) were also measured for films and film-forming solutions (FFS). TPC values ranged from 0.035 to 0.157 mg GAE/0.5 mL and SA from ~62 to 91%. Films had greater TPC but lower SA than their FFS. The presence of both pectin and herbal infusions were significant for our observations.

Explorative Sonophotocatalytic Study of C-H Arylation Reaction of Pyrazoles Utilizing a Novel Sonophotoreactor for Green and Sustainable Organic Synthesis

The development of a mild, general, and green method for the C-H arylation of pyrazoles with relatively unreactive aryl halides is an ongoing challenge in organic synthesis. We describe herein a novel sonophotoreactor based on an ultrasonic cleaning bath and blue LED light (visible light) that induce copper-catalyzed monoarylation for pharmacologically relevant pyrazoles. The hybrid effect of ultrasonic irradiation and blue LED is discussed to interpret the observed synergistic action. A broad array of pyrazoles coupled with iodobenzene avoids expensive palladium metal or salts, and certain designed substrates were attained. Only comparatively inexpensive copper(I)iodide and 1,10-phenanthroline were used all together as the catalyst. The presented technique is a greener way to create C-H arylation of pyrazoles. It significantly reduces the amount of energy needed.

Ultrasonic-assisted-synthesis of isoindolin-1-one derivatives

A small library of 3-hydroxyisoindolin-1-ones has been prepared from 3-alkylidenephtalides under ultrasonic irradiation. This practical synthesis is featured by group tolerance, high efficiency and yields. The reaction can also be performed in multigram scale and be further extended to access other motifs of isoindolin-1-ones in a one-pot fashion.

Functionalized isoindolin-1-ones have been prepared in short reaction time and excellent yields from 3-alkylidenephtalides and primary amines under ultrasonic irradiation.

Fabrication, Properties, and Biomedical Applications of Calcium-Containing Cellulose-Based Composites

Calcium-containing cellulose-based composites possess the advantages of high mechanical strength, excellent osteoconductivity, biocompatibility, biodegradation, and bioactivity, which represent a promising application system in the biomedical field. Calcium-containing cellulose-based composites have become the hotspot of study of various biomedical fields. In this mini-review article, the synthesis of calcium-containing cellulose-based composites is summarized via a variety of methods such as the biomimetic mineralization method, microwave method, co-precipitation method, hydrothermal method, freeze-drying method, mechanochemical reaction method, and ultrasound method. The development on the fabrication, properties, and applications of calcium-containing cellulose-based composites is highlighted. The as-existed problems and future developments of cellulose-based composites are provided. It is expected that calcium-containing cellulose-based composites are the ideal candidate for biomedical application.

Dimensional Optimization for ZnO-Based Mechano-ATRP with Extraordinary Activity

Various piezoelectric nanomaterials were utilized in ultrasound-mediated atom transfer radical polymerization (ATRP), owing to their outstanding piezoelectric effect. However, the relationship between the morphology of those piezocatalysts and polymerization has not been clearly established. Herein, we employed different piezoelectric zinc oxide (ZnO) nanomaterials to achieve novel mechano-induced ATRP (mechano-ATRP). Based on the synergistic effect of piezoelectric properties and specific surface area, the catalytic activity of 1D ZnO nanorods (1D-ZnO NRs) with increased aspect ratio outperformed that of 0D ZnO nanoparticles (0D-ZnO NPs). Compared to the conventional ATRP system, this system exhibited extraordinary activity toward the less activated monomer acrylonitrile (67% conversion after 6 h), with a narrow molecular weight distribution (polydispersity index ∼ 1.19). Furthermore, implications of ZnO loading, copper salt amount, degree of polymerization, monomer, and solvent were also studied for the highly efficient mechano-ATRP.

Sonolysis of per- and poly fluoroalkyl substances (PFAS): A meta-analysis

Human ingestion of per- and polyfluoroalkyl substances (PFAS) from contaminated food and water is linked to the development of several cancers, birth defects and other illnesses. The complete mineralisation of aqueous PFAS by ultrasound (sonolysis) into harmless inorganics has been demonstrated in many studies. However, the range and interconnected nature of reaction parameters (frequency, power, temperature etc.), and variety of reaction metrics used, limits understanding of degradation mechanisms and parametric trends. This work summarises the state-of-the-art for PFAS sonolysis, considering reaction mechanisms, kinetics, intermediates, products, rate limiting steps, reactant and product measurement techniques, and effects of co-contaminants. The meta-analysis showed that mid-high frequency (100 - 1,000 kHz) sonolysis mechanisms are similar, regardless of reaction conditions, while the low frequency (20 - 100 kHz) mechanisms are specific to oxidative species added, less well understood, and generally slower than mid-high frequency mechanisms. Arguments suggest that PFAS degradation occurs via adsorption (not absorption) at the bubble interface, followed by headgroup cleavage. Further mechanistic steps toward mineralisation remain to be proven. For the first time, complete stoichiometric reaction equations are derived for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) sonolysis, which add H2 as a reaction product and consider CO an intermediate. Fluorinated intermediate products are derived for common, and more novel PFAS, and a naming system proposed for novel perfluoroether carboxylates. The meta-analysis also revealed the transition between pseudo first and zero order PFOA/S kinetics commonly occurs at 15 - 40 µM. Optimum values of; ultrasonic frequency (300 - 500 kHz), concentration (>15 - 40 μM), temperature (≈20 °C), and pH range (3.2 - 4) for rapid PFOX degradation are derived by evaluation of prior works, while optimum values for the dilution factor applied to PFAS containing firefighting foams and applied power require further work. Rate limiting steps are debated and F- is shown to be rate enhancing, while SO42- and CO2 by products are theorised to be rate limiting. Sonolysis was compared to other PFAS destructive technologies and shown to be the only treatment which fully mineralises PFAS, degrades different PFAS in order of decreasing hydrophobicity, is parametrically well studied, and has low-moderate energy requirements (several kWh g-1 PFAS). It is concluded that sonolysis of PFAS in environmental samples would be well incorporated within a treatment train for improved efficiency.

Synthesis of Fluorinated 1-(2-Benzyl)-phthalazinone, 1-Phthalazinamine, and 1-Alkoxy/Benzyloxy-Phthalazine Derivatives by Ultrasonication Method

Fluorinated heterocyclic compounds have been proven to exhibit interesting potential biological activities. Therefore, various fluorinated 1(2-(N)-benzyl) phthalazinones, 1-Phthalazinamine, and non-fluorinated 1-alkoxy/benzyloxy phthalazines derivatives have been synthesized by the ultrasonication method. This protocol is more efficient than the conventional method in terms of product yield and reaction handling and timelines.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Ultrasound Accelerated Expedient and Eco-Friendly Synthesis of Aryl Sulfonates Using I2 As Catalyst At Ambient Conditions

:

Aryl sulfonates were developed by ssing an energy-saving and eco-friendly approach, through ultrasound-assisted coupling reaction of readily sodium sulfinates with N-hydroxyphthalimide, under metal-free and mild conditions within 10 min at room temperature.

A correlation between cavitation bubble temperature, sonoluminescence and interfacial chemistry - A minireview

Ultrasound induced cavitation (acoustic cavitation) process is found useful in various applications. Scientists from various disciplines have been exploring the fundamental aspects of acoustic cavitation processes over several decades. It is well documented that extreme localised temperature and pressure conditions are generated when a cavitation bubble collapses. Several experimental techniques have also been developed to estimate cavitation bubble temperatures. Depending upon specific experimental conditions, light emission from cavitation bubbles is observed, referred to as sonoluminescence. Sonoluminescence studies have been used to develop a fundamental understanding of cavitation processes in single and multibubble systems. This minireview aims to provide some highlights on the development of basic understandings of acoustic cavitation processes using cavitation bubble temperature, sonoluminescence and interfacial chemistry over the past 2-3 decades.

Ultrasound-assisted pseudohomogeneous tungstate catalyst for selective oxidation of alcohols to aldehydes

The idea of applying ultrasound (US) as a green activation method in chemical transformations, especially in catalytic alcohol oxidations, technically and ecologically appeals to chemists. In the present work, as an attempt to fulfill the idea of designing an eco-friendly system to oxidize alcoholic substrates into corresponding aldehydes, we developed multifunctional tungstate-decorated CQD base catalyst, A-CQDs/W, and examined its sonooxidation performance in presence of H₂O₂ as a green oxidant in aqua media. By comparing the catalyst performance in oxidize benzyl alcohol as a testing model to benzaldehyde (BeOH) prior and after US irradiation—trace vs 93%- the key role of ultrasonic irradiation in achieving high yield is completely appreciated. Exceptional thermal and compression condition that is created as a result of acoustic waves is in charge of unparalleled yield results in this type of activation method. The immense degree of reagent interaction in this method, ensures the maximum yield in notably low time, which in turn leads to decrease in the number of unreacted reagents and by-products. Meanwhile, the need for using toxic organic solvents and hazardous oxidants, auxiliaries and phase transfer catalyst (PTC) is completely obviated.

"Green Is the Color": An Update on Ecofriendly Aspects of Organoselenium Chemistry

Organoselenium compounds have been successfully applied in biological, medicinal and material sciences, as well as a powerful tool for modern organic synthesis, attracting the attention of the scientific community. This great success is mainly due to the breaking of paradigm demonstrated by innumerous works, that the selenium compounds were toxic and would have a potential impact on the environment. In this update review, we highlight the relevance of these compounds in several fields of research as well as the possibility to synthesize them through more environmentally sustainable methodologies, involving catalytic processes, flow chemistry, electrosynthesis, as well as by the use of alternative energy sources, including mechanochemical, photochemistry, sonochemical and microwave irradiation.

A Comprehensive Optimization of Ultrasound-Assisted Extraction for Lycopene Recovery from Tomato Waste and Encapsulation by Spray Drying

This study aimed to extract bioactive compounds from tomato waste through ultrasound-assisted extraction (UAE), using ethanol as solvent. Process optimization was carried out by a central composite design of 33 runs for response surface modelling, simultaneously analyzing the effect of temperature (T), time (t), volume (V), liquid-to-solid ratio (L/S), amplitude (A), the pulser duration (on), and their interaction. The best conditions found by the desirability method (T = 65 °C, t = 20 min, L/S = 72 mL/g, A = 65%, on = 33 s, V = 90 mL) were experimentally verified, leading to the production of an extract with interesting properties (total carotenoids of 1408 ±14 µglycopene equivalents/g, lycopene yield of 1536 ± 53 µg/g, 36.1 ± 0.9 µgtrolox equivalents/g as antiradical power). Due to the instability of lycopene, the extract encapsulation by spray drying was undertaken using inulin and maltodextrins as coating agents. The evaluation of wall material composition provided high product recovery (73%), a high content of encapsulated compared to superficial lycopene (15.3 ± 2.9 and 0.30 ± 0.02 µg/g), and a product with good water solubility. The novelty of this work concerned the simultaneous study of the effect and interdependences of the UAE parameters, and the use of inulin to enhance the properties of microparticles.

Self-Assembled Copper Metallogel Bearing Terpyridine and Its Application as a Catalyst for the Click Reaction in Water

Metallogels have attracted a great deal of interest because of their intriguing properties and applications in chemsensors, batteries, catalysis, and other fields. In this work, a novel ligand bearing terpyridine and hydroxyamine units was designed and synthesized. The ligand selectively gelated with copper ions in water by heating and cooling or sonication. Different physicochemical studies [Fourier transform infrared, ultraviolet-visible (UV-vis), electron paramagnetic resonance (EPR), scanning electron microscopy, X-ray diffraction, and rheology] were conducted to characterize the gels. We show that coordination interaction, π-π interaction, and noncovalent interaction had obvious effects on the properties of the gel. Additionally, a stable radical hydrogel could be obtained by ultrasound treatment, which was accompanied by color variation from green to blue. This was further confirmed by UV-vis and EPR experiments. Furthermore, the copper metallogels were developed as catalysts for the preparation of 1,2,3-triazole derivatives in water at 25 °C. Although various types of catalysts have been investigated, the use of metallogels as catalysts for the click reaction in water has been scarce. This strategy shows the process is simple, affords a high yield, and is "green" and economical.

Three-Component Synthesis of Some New Coumarin Derivatives as Anticancer Agents

A three-component reaction for the synthesis of novel 3-heteroaryl-coumarin utilizing acetylcoumarin synthon under ultrasonic irradiation was developed using chitosan-grafted poly(vinylpyridine) as an eco-friendly catalyst. The process is a simple, facile, efficient procedure for the preparation of compounds displaying a thiazole ring linked to coumarin moiety. Moreover, all the products were evaluated for their anticancer activities against HEPG2-1. The results revealed that three new compounds showed promising anticancer activities.