Portable and on-site electrochemical sensor based on surface molecularly imprinted magnetic covalent organic framework for the rapid detection of tetracycline in food

In this study, for the first time, surface molecularly imprinted magnetic covalent organic frameworks (Fe₃O₄@COFs@MIPs) were combined with disposable screen-printed electrode (SPE) to construct a portable and on-site electrochemical sensor for the rapid detection of tetracycline (TC). The Fe₃O₄@COFs@MIPs, which was prepared by layer-by-layer modification method, had good magnetism and excellent adsorption ability. With the help of disposable SPE, equipped with a magnet, the electrode modification process was simplified and the detection efficiency was improved. Under optimal conditions, the fabricated electrochemical sensor exhibited linearity ranging from 1 × 10^-10 to 1 × 10^-4 g mL^-1. It had good selectivity, excellent reproducibility, desirable stability and remarkable applicability. The fabricated sensor was successfully applied to detect TC in real samples with satisfactory recoveries (96.15-106.20%). The detection strategy separated the recognition and adsorption process from the electrochemical detection process, providing a design idea for the application of COFs in the construction of high-efficiency molecularly imprinted electrochemical sensors.

Tetracycline, sulfadimethoxine, and antibiotic resistance gene dynamics during anaerobic digestion of dairy manure

Antibiotic use in animal husbandry is a potential entryway for antibiotics and antibiotic resistance genes (ARGs) to enter the environment through manure fertilizer application. The potential of anaerobic digestion (AD) to remove antibiotics and ARGs was investigated through tetracycline (TC) and sulfadimethoxine (SDM) additions into dairy manure digested for 44 d. This was the first study to evaluate antibiotics at concentrations quantified on-farm and relevant to field applications of manure. Triplicate treatments included a 1 mg L^-1 TC spike, a 10 mg L^-1 TC spike, a 1 mg L^-1 SDM spike (SDM 1), a 10 mg L^-1 SDM spike, a mixture of TC and SDM at 1 mg L^-1 each (TC+SDM 1), and a manure-only treatment. The SDM spikes were reduced by >99% reduction during the AD processing, but TC additions had variable reductions (0-96%). Molecular analyses showed that decreases in tetM gene copies correlated with declines in TC; however, reductions in SDM concentration did not correlate with decreases in sul1 gene copy concentrations. The AD reactors containing 10 mg L^-1 of TC and 10 mg L^-1 of SDM both had CH₄ production reductions of 7.8%, whereas no CH₄ reduction was observed in other treatments (1 mg L^-1 treatments). The study results were the first to confirm that AD can remove SDM when adding at concentrations observed in on-farm manure (<1 mg L^-1 ) without compromising energy production. Because TC adsorbs to the solid particles and transforms into isomers, the decreases in TC concentrations were more variable and should be closely monitored.

On-farm screw press and rotary drum treatment of dairy manure-associated antibiotic residues and resistance

An on-farm solid-liquid separator (SLS) and rotary drum composter (RD) manure treatment system was monitored for its impact on antibiotic residues and antibiotic resistance genes (ARGs). Administered antibiotics were tracked, and treatment system mass flows were quantified. Total amounts of antibiotic residues and ARGs were calculated from measured concentrations and mass flows. Only oxytetracycline (OTC) and sulfadimethoxine (SDM) were detected in the manure treatment system influent. No β-lactams were measured despite comprising ∼25% of the antibiotics administered. Nearly 80% of OTC and >90% of SDM partitioned into SLS liquid effluent (SL). The RD reduced the mass of OTC remaining in the SLS solid effluent (SS) significantly by 50%, whereas the mass of SDM appeared to increase after RD treatment. All four ARGs tested were detected in influent, with >70% of the sul1, bla_OXA-1 , and intI1 genes (normalized by the 16S ribosomal RNA gene) partitioning into the SL. In contrast, about eight times more normalized tetO gene copies partitioned into the SS than in the SL. All ARGs remaining in the SS were significantly reduced by the RD treatment, with a noteworthy 98% reduction in normalized tetO gene copies. This study provides insight into on-farm levels of antibiotic residues and ARGs in dairy manure, their partitioning during SLS treatment, and their fate after a high-temperature RD treatment reaching 72.2 ± 0.18 °C near the outlet. It also notes the importance of mass-flow standardization of data, and the need to work towards standardization of manure system sampling protocols for antibiotic residues and ARGs.

Simultaneous oxidation of ammonium and tetracycline in a membrane aerated biofilm reactor

The membrane aerated biofilms reactor (MABR) is an emerging technology in wastewater treatment with particular advantages including high rate nitrification, and very high oxygen transfer efficiencies. In this study a synthetic feed water incorporating tetracycline (TC) was investigated in a MABR. Simultaneous removal of ammonium and tetracycline (TC) in the reactor, formation of TC transformation products (TPs), and microbial community analysis in the biofilm growing on the membrane were performed. A range of TC and ammonium loading rates and the effect of different intra-membrane oxygen pressures were on treatment performance were systematically investigated. Successful nitrification and TC degradation were achieved with the highest TC removal (63%) obtained at a HRT of 18 h HRT and 0.41 bar gas pressure. It has shown that different operating conditions (HRT and gas pressure) do not cause a significant change in ammonium removal. The concentration of TPs such as ETC, EATC, and ATC was determined to be at the ppb level. Molecular results showed that MABR reactor was mainly dominated by β-proteobacteria. The relative abundance of this group decreased in parallel with the increasing ammonium and TC loading.

Assessing uptake of antimicrobials by Zea mays L. and prevalence of antimicrobial resistance genes in manure-fertilized soil

Manure-borne antimicrobials and antimicrobial resistance genes (ARGs) are of environmental concern due to their potential to be transferred into the food-web via plant-uptake. In this study, Zea mays L. seeds were grown in three different soil conditions: soil without dairy manure, dairy manure-amended soil, and antimicrobial spiked dairy manure-amended soil, to investigate the potential uptake of antimicrobials and ARGs present in manure. The antimicrobial spiked manure consisted of dairy manure fortified with 1 mg/Kg of each individual antimicrobial compounds belonging to the sulfonamide and tetracycline classes. Samples of the Zea mays L. plants were harvested over the course of three weeks to determine potential uptake of antimicrobials from soil to plant shoots, and to compare prevalence of ARGs in manure amended soils and plant tissue. Antimicrobial analysis was performed using liquid chromatography with tandem mass spectrometry (LC-MS/MS), and ARGs (sul1, tetO, and OXA-1) were analyzed using quantitative polymerase chain reaction (qPCR). The study found that both tetracycline and sulfamerazine antimicrobials bioaccumulated in the Zea mays L., reaching concentrations of nearly 3000 ng/g and 1260 ng/g, respectively. Tetracycline residues predominated in the soil, while sulfonamides had mainly bioaccumulated in Zea mays L. tissue. The greatest average uptake factor within the Zea mays L. tissue was 8 for tetracyclines and 110 for sulfonamides indicating larger bioaccumulation of sulfonamides. Additionally, three ARGs (sul1, tetO, and OXA-1) were detected in the soil, only after manure application. However, ARGs were not detected in any of the plant samples.

pH-sensitive and magnetically separable Fe/Cu bimetallic nanoparticles supported by graphene oxide (GO) for high-efficiency removal of tetracyclines

Nanoscale zero-valent iron (nZVI) has been recognized as one of the most promising materials for the removal of a wide range of pharmaceuticals in water; however, aggregation and instability of nZVI in aqueous media reduces its efficacy. In this study, graphene oxide (GO) supported nZVI/copper bimetallic-nanoparticles (BNPs) were fabricated for high-efficiency removal of tetracyclines (TCs). In comparison to pure nZVI, the addition of Cu to the nano-adsorbents enhanced the efficacy of TC removal by 13%. The GO supporter mitigated the aggregation of BNPs and reduced the dissolution of metal nanoparticles, thereby demonstrating a higher working efficacy than Fe/Cu BNPs, even over five consecutive runs. At the optimal condition (pH 5-7, [TCs]: [Fe/Cu-GO] = 1:2.5 w/w), the Fe/Cu-GO nanocomposite showed near-complete (∼100%) TCs-removal within 15 min. The adsorption of TCs by Fe/Cu-GO fits the Freundlich model, with an adsorption capacity of 201.9 mg g^-1. The Fe/Cu-GO nanocomposite showed pH-dependent assembly behavior to potentially recycle GO at a pH > 9 condition to generate new nanoparticles. The high removal efficiency of TCs, combining with high stability and easy separation performance in the aqueous environment, makes Fe/Cu-GO nanocomposites a promising material for treating latent antibiotics in water.

A new approach for the extraction of tetracyclines from soil matrices: application of the microwave-extraction technique

The widespread use of tetracyclines (TCs) in animal husbandry is associated with their constant penetration into the environment and the threat they might pose to living organisms. While the literature data on the analysis of these substances in such matrices as food, tissues, or wastewater are quite extensive, there are still only a few methods presented for the determination of these compounds in soil samples. Moreover, among the literature methods for the extraction of TCs from soil samples, microwave-assisted solvent extraction (MAE) was used only once and in combination with liquid chromatography with spectrophotometric detection (LC-UV). However, according to the EU Commission Decision 2002/657/EC, the use of LC-UV for the determination of compounds, including pharmaceuticals, in environmental samples is not sufficient. Therefore, the development and application of a sensitive and selective method using the MAE-SPE-LC-MS/MS(MRM) technique for the isolation and identification of a mixture of oxytetracycline (OTC), tetracycline (TC), and chlortetracycline (CTC) in soils is presented in our study. The credibility of this method has been confirmed with good parameters of validation. The optimal extraction conditions of three TCs using MAE techniques were to conduct double extraction for 10 min each, at 60 °C, using a mixture of ACN:McIlvaine buffer:0.1 M EDTA (2:1:1, v/v/v) and an additional cleaning of the extracts by SPE. The effectiveness of the extraction of these compounds was assessed based on two different ways (absolute recovery from 46 to 65.1% and relative recovery from 101.1 to 109.5%). Finally, the validated MAE-SPE-LC-MS/MS(MRM) method was used for the analysis of six samples from agricultural areas of northern Poland. OTC and TC, at concentrations of 11.7 and 14.5 μg kg^-1 were determined in two different samples. An assessment of risk quotients was also performed. The presented method was proven to be a useful tool in the analysis of residues of selected TCs in the soil ecosystem. Obtained data on the presence of these drugs in Polish soils is the first report for this country.

Chlortetracycline removal by using hydrogen based membrane biofilm reactor

In the last years, increasing attention has been paid on the presence of antibiotics in aqueous environments due to their ecological damage and potential adverse effects on organisms. Membrane biofilm reactors (MBfR) have been gained a significant popularity as an advanced wastewater treatment technology in removing of organic micro-pollutants. In this study, the performance of H₂-MBfR for simultaneous removal of nitrate and chlortetracycline, formation of transformation products and community analysis of the biofilm grown on the gas permeable hollow fiber membranes was evaluated by considering effect of the hydraulic retention time, surface loadings of target pollutants and H₂ pressure. The results showed that the simultaneous chlortetracycline (96%) and nitrate removal (99%) took placed successfully under the conditions of 5h HRT and 2psi H₂ pressure. It has been determined that the main elimination process was biodegradation and Betaproteobacteria species was responsible for chlortetracycline degradation.

Hydrogen-based membrane biofilm reactor for tetracycline removal: biodegradation, transformation products, and microbial community

Tetracycline (TC) in aqueous environment could be reductively degraded by using a hydrogen-based membrane biofilm reactor (H₂-MBfR) under denitrifying conditions as it provides an appropriate environment for the antibiotic-degrading bacteria in biofilm communities. This study evaluates the performance of H₂-MBfR for simultaneous removal of nitrate and TC, formation of degradation products of TC, and community analysis of the biofilm grown on the gas-permeable hollow fiber membranes. Hence, a H₂-MBfR receiving approximately 20 mg N/l nitrate and 0.5 mg/l TC was operated under different H₂ pressures, hydraulic retention times (HRTs), and influent TC concentrations in order to provide various nitrate and TC loadings. The results showed that H₂-MBfR accomplished successfully the degradation of TC, and it reached TC removal of 80-95 % at 10 h of HRT and 6 psi (0.41 atm) of H₂ gas pressure. TC degradation took placed at increased HRT and H₂ pressures while nitrate was the preferred electron acceptor for most of the electrons generated from H₂ oxidation used for denitrification. The transformation products of TC were found at part per billion levels through all the experiments, and the concentrations decreased with the increasing HRT regardless of H₂ pressure. Analyses from clone library showed that the microbial diversity at the optimal conditions was higher than that at the other periods. The dominant species were revealed to be Betaproteobacteria, Acidovorax caeni, and Alicycliphilus denitrificans.

Challenges in the Measurement of Antibiotics and in Evaluating Their Impacts in Agroecosystems: A Critical Review

Large quantities of antibiotics are used in agricultural production, resulting in their release to agroecosystems through numerous pathways, including land application of contaminated manure, runoff from manure-fertilized fields, and wastewater irrigation of croplands. Antibiotics and their transformation products (TPs) exhibit a wide range of physico-chemical and biological properties and thus present substantive analytical challenges. Advances in the measurement of these compounds in various environmental compartments (plants, manure, soil, sediment, and water) have uncovered a previously unrealized landscape of antibiotic residues. These advanced multiresidue methods, designed to measure sub-ng g concentrations in complex mixtures, remain limited by the inherent intricacy of the sample matrices and the difficultly in eliminating interferences that affect antibiotic detection. While efficient extraction methods combined with high sensitivity analysis by liquid chromatography/mass spectrometry can provide accurate quantification of antibiotics and their TPs, measured concentrations do not necessarily reflect their bioavailable fractions and effects in the environment. Consequently, there is a need to complement chemical analysis with biological assays that can provide information on bioavailability, biological activity, and effects of mixtures. Enzyme-linked immunosorbent assays (ELISA), often used as screening tools for antibiotic residues, may be useful for detecting the presence of structurally related antibiotic mixtures but not their effects. Other tools, including bioreporter assays, hold promise in measuring bioavailable antibiotics and could provide insights on their biological activity. Improved assessment of the ecological and human health risks associated with antibiotics in agroecosystems requires continued advances in analytical accuracy and sensitivity through improvements in sample preparation, instrumentation, and screening technologies.

Ion Suppression Study for Tetracyclines in Feed

Ion suppression in analysis of tetracyclines in feed was studied. The conventional analysis consists of a liquid extraction followed by a clean-up step using solid phase extraction (SPE) technique and analysis of the tetracyclines by liquid chromatography and mass spectrometric detection. Various strategies for extraction and cleanup were tested in the present work, and the effectiveness to decrease the ion suppression on the MS/MS signals was evaluated. Four sample treatment methods were tested with five different feed samples. Extraction solvents tested were McIlvaine buffer and a mixture of McIlvaine buffer dichloromethane (3 : 1). SPE cartridges for cleanup were Oasis HLB, Oasis MCX, and Oasis MAX. The effectiveness of the methods was evaluated in terms of decreasing the ion suppression effect but also of decreasing the variability of ion suppression between samples. The method that provided the most satisfactory results involved a clean-up step based on SPE using mixed-mode cation exchange cartridges (Oasis MCX).

Influence of soil use on prevalence of tetracycline, streptomycin, and erythromycin resistance and associated resistance genes

This study examined differences in antibiotic-resistant soil bacteria and the presence and quantity of resistance genes in soils with a range of management histories. We analyzed four soils from agricultural systems that were amended with manure from animals treated with erythromycin and exposed to streptomycin and/or oxytetracycline, as well as non-manure-amended compost and forest soil. Low concentrations of certain antibiotic resistance genes were detected using multiplex quantitative real-time PCR (qPCR), with tet(B), aad(A), and str(A) each present in only one soil and tet(M) and tet(W) detected in all soils. The most frequently detected resistance genes were tet(B), tet(D), tet(O), tet(T), and tet(W) for tetracycline resistance, str(A), str(B), and aac for streptomycin resistance, and erm(C), erm(V), erm(X), msr(A), ole(B), and vga for erythromycin resistance. Transposon genes specific for Tn916, Tn1549, TnB1230, Tn4451, and Tn5397 were detected in soil bacterial isolates. The MIC ranges of isolated bacteria for tetracycline, streptomycin, and erythromycin were 8 to >256 μg/ml, 6 to >1,024 μg/ml, and 0.094 to >256 μg/ml, respectively. Based on 16S rRNA gene similarity, isolated bacteria showed high sequence identity to genera typical of soil communities. Bacteria with the highest MICs were detected in manure-amended soils or soils from agricultural systems with a history of antibiotic use. Non-manure-amended soils yielded larger proportions of antibiotic-resistant bacteria, but these had lower MICs, carried fewer antibiotic resistance genes, and did not display multidrug resistance (MDR).

An overview of matrix effects in liquid chromatography-mass spectrometry

Matrix-dependent signal suppression or enhancement represents a major drawback in quantitative analysis with liquid chromatography coupled to atmospheric pressure ionization mass spectrometry (LC-API-MS). Because matrix effects (ME) might exert a detrimental impact on important method parameters (limit of detection, limit of quantification, linearity, accuracy, and precision), they have to be tested and evaluated during validation procedure. This review gives a detailed description on when these phenomena might be expected, and how they can be evaluated. The major sources of ME are discussed and illustrated with examples from bioanalytical, pharmaceutical, environmental, and food analysis. Because there is no universal solution for ME, the main strategies to overcome these phenomena are described in detail. Special emphasis is devoted to the sample-preparation procedures as well as to the recent improvements on chromatographic and mass spectrometric conditions. An overview of the main calibration techniques to compensate for ME is also presented. All these solutions can be used alone or in combination to retrieve the performance of the LC-MS for a particular matrix-analyte combination.

Simultaneous analysis of free and conjugated estrogens, sulfonamides, and tetracyclines in runoff water and soils using solid-phase extraction and liquid chromatography-tandem mass spectrometry

The ability to monitor multiple analytes from various classes of compounds in a single analysis can increase throughput and reduce cost when compared to traditional methods of analyses. This method for analyzing free (parent estrogen) and conjugated estrogens (metabolites) along with sulfonamides and tetracyclines utilizes a high pH (10.4) mobile phase with an ammonium hydroxide buffer for both positive- and negative-mode electrospray ionization. A single-step sample preparation by solid-phase extraction (SPE) was used to isolate and concentrate all analytes simultaneously. The analytical method was developed and validated for recoveries at 3 concentration levels for water and soil and produced recoveries of 42-123% and 21-105% respectively. Method detection limits ranged from 0.3 to 1.0 ng/L for water samples and 0.01 to 0.1 ng/g for soils. The method quantification limit ranged from 0.9 to 3.3 ng/L for water samples and 0.06 to 0.7 ng/g for soils. The single-point standard addition calibration procedure was validated across a linear range of MQL to 100 ng/L with ≥82% accuracy against a matrix matched standard curve. Furthermore, sorption of tetracyclines onto glassware was investigated and minimized by 10% using nitric acid-rinsed glassware, while separation parameters were further optimized based on retention time and signal responses. This method has been used for the quantification of estrogens, tetracyclines, and sulfonamides in soil and runoff waters with multiple compounds detected simultaneously in a single analysis.

Applicability of the Charm II system for monitoring antibiotic residues in manure-based composts

The effluence of veterinary antibiotics (VAs) to aquatic and terrestrial environments is of concern due to the potential adverse effects on human health, such as the production of antibiotic resistant bacteria. One of the main pathways for antibiotics to enter the environment is via the application of manure and/or manure-based composts as an alternative organic fertilizer to agricultural lands. While a wide diversity of manure-based composts are produced in Korea, there is currently no regulatory guideline for VA residues. Hence, monitoring and limiting the concentration of VA residues in manure and/or manure-based composts prior to application to the lands is important to mitigate any environmental burden. The current study was conducted to examine the applicability of the Charm II antibiotic test system for monitoring tetracyclines, sulfonamides and macrolides in manure-based composts. The Charm II system was a highly reproducible method for determining whether VA residue concentrations in manure-based compost exceeded specific guideline values. A wide range of manure-based composts and liquid fertilizers commercially available in Korea were examined using the Charm II system to monitor the residues of the target VAs. For this, the guideline concentrations of VA residues (0.8 mg kg(-1) for tetracyclines, 0.2 mg kg(-1) for sulfonamides, and 0.1 mg kg(-1) for macrolides) stated in 'Official Standard of Feeds' under the 'Control of Livestock and Fish Feed Act' in Korea were adopted to establish control points. Of the 70 compost samples examined 12 exceeded 0.8 mg kg(-1) for tetracyclines and 21 exceeded 0.2 mg kg(-1) for sulfonamides. Of the 25 liquid fertilizer samples examined most samples exceeded these prospective guidelines.

The impact of environmental contamination with antibiotics on levels of resistance in soil bacteria

This study examined the effects of tetracycline and streptomycin on microorganisms in three different soil habitats: forest soil, agricultural soil, and compost. These antibiotics are commonly used in both medical and veterinary therapy as well as in the production of plant biomass and until quite recently, the production of animal biomass. Microcosms were used as model systems in which the number of microorganisms in environments containing different amounts of antibiotics was analyzed. The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of tetracycline and streptomycin were determined. The MIC and MBC values of tetracycline against the tested strains were 20 to 180 microg/ mL and 30 to 300 microg/mL, respectively, and of streptomycin, 360 to 500 microg/mL and > or =500 microg/mL, respectively. Resistant bacterial strains were identified and their physiological profiles assessed. Streptomycin and tetracycline were found to reduce the number of bacteria in the studied soils by between 50 and 80%. Soil bacteria were found to be more resistant to streptomycin than to tetracycline. The bacterial species showing the highest resistance to tetracycline were Rhizobium radiobacter, Burkholderia cepacia, Brevundimonas vesicularis, and Pasteurella multocida. Most soils with high concentrations of streptomycin (5 mg/kg) contained Rhizobium radiobacter, Burkholderia cepacia, and Sphingomonas multivorum, among others. The strains most resistant to tetracycline were isolated from agricultural soil that is constantly subjected to tetracycline pressure from animal manures and biosolids. Among resistant strains, opportunistic pathogens were identified.

Determination of pharmaceuticals in environmental and biological matrices using pressurised liquid extraction--are we developing sound extraction methods?

Pressurised liquid extraction (PLE) is now a well established and extensively applied extraction technique in environmental analysis for pollutants such as persistent organic pollutants (POPs). During the past decade, an emerging group of environmentally interesting analytes are pharmaceuticals that are continuingly released into the environment. This class is comprised with compounds of various properties. As the field of the analysis of these compounds grows, an increasing number of PLE methods for pharmaceuticals of varying quality are developed and published. This review summarises the critical PLE parameters during PLE method development and highlight them with examples from recently published papers utilising pressurised liquid extraction for the determination of pharmaceuticals in environmental and biological matrices. These recent methods are summarised and critically discussed with the aim to provide important reflections to alleviate in future PLE development for pharmaceuticals in environmental matrices.

Distribution of sulfamethazine, chlortetracycline and tylosin in manure and soil of Canadian feedlots after subtherapeutic use in cattle

Feedlots are potential point sources for the flow of antibiotics into the environment due to common use of antibiotics such as sulfamethazine, chlortetracycline and tylosin. Hence soils and manures originating from a grassland control, an experimental and a commercial feedlot were analyzed and mass balances were calculated for these antibiotics. Up to 9990 microg kg(-1) sulfamethazine and 401microg kg(-1) chlortetracycline on a dry matter basis were determined in feedlot manure. Soil concentrations were two orders of magnitude smaller. This corresponds to 7-40% of the calculated residual amount. In the commercial feedlot chlortetracycline was found down to soil depths of -40 cm; sulfamethazine was still detectable 1 year after medication. Sulfamethazine and chlortetracycline were additionally determined in manure of a control treatment in the experimental feedlot where cattle never received antibiotics. This was attributed to runoff from upslope pens. Consequently, antibiotics partially persist within feedlots and may be dislocated into the surrounding environment by vertical transport and runoff.