The Underlying Catalytic Role of Oxygen Vacancies in Fatty Acid Methyl Esters Ketonization over TiOx Catalysts

Recently, interest in converting bio-derived fatty acid methyl esters (FAMEs) into added-value products has significantly increased. The selectivity of ketonization reaction in the conversion of the FAMEs has significantly hampered the efficiency of this process. Herein, this work reports the preparation of catalysts with different levels of oxygen vacancies while the crystal phase remained unchanged. The catalyst with the highest level of oxygen vacancy exhibited the maximum selectivity. The density functional theory (DFT) simulation showed an increase in interatomic distances leading to the formation of frustrated Lewis pairs (FLPs) upon the creation of oxygen vacancies. The surface measurements, type and density of acid sites of the catalysts, showed that the Lewis acid sites enhanced the selectivity for ketone production; while Bronsted acid sites increased the formation of by-products. Moreover, the ketone formation rate was directly proportional to acid density. The findings of this research provide a different approach for catalyst design, based on defects engineering and their effect on the surface activity, which could be used for enhancing the catalytic performance of novel metal oxides.

Magnetic transitions of hydrogenated HxCrO2(x= 0-2) monolayer from a ferromagnetic half-metal to antiferromagnetic insulator

Two-dimensional (2D) transition metal oxide monolayers are currently attracting great interest in materials research due to their versatility and tunable electronic and magnetic properties. In this study, we report the prediction of magnetic phase changes in H_xCrO₂(0 ⩽x⩽ 2) monolayer on the basis of first-principles calculations. As the H adsorption concentrationxincreases from 0 to 0.75, H_xCrO₂monolayer transforms from a ferromagnetic (FM) half-metal to a small-gap FM insulator. Whenx= 1.00 and 1.25, it behaves as a bipolar antiferromagnetic (AFM) insulator, and eventually becomes an AFM insulator asxincreases further up to 2.00. The results suggest that the magnetic properties of CrO₂monolayer can be effectively controlled by hydrogenation, and that H_xCrO₂monolayers have the potential for realizing tunable 2D magnetic materials. Our results provide a comprehensive understanding of the hydrogenated 2D transition metal CrO₂and provide a research method that can be used as a reference for the hydrogenation of other similar 2D materials.

Efficient Adsorption-Assisted Photocatalysis Degradation of Congo Red through Loading ZIF-8 on KI-Doped TiO2

Zeolitic imidazolate framework-8 (ZIF-8) was evenly loaded on the surface of TiO₂ doped with KI, using a solvent synthesis method, in order to produce a ZIF-8@TiO₂ (KI) adsorption photocatalyst with good adsorption and photocatalytic properties. The samples were characterized by XRD, SEM, EDX, XPS, BET and UV-Vis. The photocatalytic efficiency of the material was obtained by photocatalytic tests. The results indicate that the doping with I inhibited the grain growth and reduced the crystallite size of TiO₂, reduced the band gap width and improved the utilization rate for light. TiO₂ (KI) was a single crystal of anatase titanium dioxide. The combination of ZIF-8 and TiO₂ (KI) improved the specific surface area and increased the reaction site. The ZIF-8@TiO₂ (KI) for Congo red was investigated to validate its photocatalytic performance. The optimal concentration of Congo red solution was 30 mg/L, and the amount of catalyst was proportional to the degradation efficiency. The degradation efficiency of ZIF-8@TiO₂ (5%KI) was 76.42%, after being recycled four times.

Quantification of perfluorooctanoic acid decomposition mechanism applying negative voltage to anode during photoelectrochemical process

Perfluorooctanoic acid (PFOA) is a carcinogen with a high binding energy between fluorine and carbon and is symmetrically linked, making it difficult to treat. In this study, a self-doped TiO₂ nanotube array (TNTA) was used as the anode and platinum as the cathode to quantify the PFOA removal mechanism using a photoelectrochemical (PEC) system. The external voltage was negative compared to that of the anode. In addition, NO₃^- and t-BuOH were used as scavengers to quantify the PFOA oxidation/reduction mechanism in the PEC system. As a result of the study, TNTA crystals are TiO₂ anatase, and the band gap energy was 3.42. The synergy index of PEC was 1.25, and the best electrolyte was SO₄^2-. The PFOA decomposition activation energy corresponds to 70.84 kJ mol^-1. Moreover, ΔH^# and ΔS^# correspond to 68.34 kJ mol^-1 and 0.190 kJ mol^-1 K^-1, respectively. When the external negative voltage was 1 V, the contributions of the oxidation/reduction reaction during PFOA decomposition were 60% and 40%, and when the external negative voltage was 5 V, the contributions of the redox reaction were 45% and 55%. As the external negative voltage increased, the contribution of the reduction reaction increased as the number of electrons applied to the anode increased. When PFOA was decomposed, the by-products were C₇F₁₃O₂H, C₆F₁₁O₂H, C₅F₉O₂H, and C₄F₇O₂H, respectively. This study is expected to be used as basic data for research on the effects of other factors on the oxidation/reduction as well as the selection of anode and cathode materials on the decomposition of pollutants other than PFOA when using a PEC system.

Enhanced Redox Kinetics and Duration of Aqueous I2 /I- Conversion Chemistry by MXene Confinement

Weak binding and affinity between the conductive support and iodine species leads to inadequate electron transfer and the shuttle effect. Herein, redox kinetics and duration are significantly boosted by introducing a Nb₂ CT_X host that is classified as a layered 2D Nb-based MXene. With a facile electrodeposition strategy, initial I^- ions are electrically driven to insert in the nanosized interlayers and are electro-oxidized in situ. Linear I₂ is firmly confined inside and benefits from the rapid charge supply from the MXene. Consequently, an aqueous Zn battery based on a Zn metal anode and ZnSO₄ electrolyte delivers an ultraflat plateau at 1.3 V, which contributes to 84.5% of the capacity and 89.1% of the energy density. Record rate capability (143 mAh g^-1 at 18 A g^-1 ) and lifespan (23 000) cycles are achieved, which are far superior to those of all reported aqueous MXenes and I₂ -metal batteries. Moreover, the low voltage decay rate of 5.6 mV h^-1 indicates its superior anti-self-discharge properties. Physicochemical analyses and density functional theory calculations elucidate that the localized electron transfer and trapping effect of the Nb₂ CT_X MXene host are responsible for enhanced kinetics and suppressed shuttle behavior. This work can be extended to the fabrication of other I₂ -metal batteries with long-life-time expectations.

Historical development and prospects of photocatalysts for pollutant removal in water

Photocatalysis, as a low-cost and environment friendly technology, has demonstrated a significant potential for water pollution purification; it has received extensive attention in recent decades. The key is the photocatalyst; a large number of photocatalysts have been developed. To better understand and further develop the photocatalysis technology for water treatment, this review summarizes its development over time. The development period is divided into four stages (1960s-1993, 1994-2000, 2001-2010, and 2011-present) to provide readers with a better understanding of the development characteristics, and causes and consequences of each historical stage. This review expounds the origin and development of photocatalysis and the obstacles encountered and overcome. It describes the development of mechanisms and methods to solve these problems in each time period. Moreover, it reviews the recent development of new photocatalysts, the concept of designing photocatalysts, and photocatalytic-coupling systems. Finally, it enumerates the problems that continue to exist in the application of photocatalysis technology, and highlights the key issues that must be addressed in future research. The review is aimed at providing the researchers with a deeper understanding of photocatalysis technology and encourage further development of the application of photocatalysis to water treatment.

Flexible Carbon-Fiber/Semimetal Bi Nanosheet Arrays as Separable and Recyclable Plasmonic Photocatalysts and Photoelectrocatalysts

In this work, we prepared flexible carbon-fiber/semimetal Bi nanosheet arrays from solvothermal-synthesized carbon-fiber/Bi₂O₂CO₃ nanosheet arrays via a reductive calcination process. The flexible carbon-fiber/semimetal Bi nanosheet arrays can function as photocatalysts and photoelectrocatalysts for 2,4-dinitorphenol oxidation. Compared with carbon-fiber/Bi₂O₂CO₃ nanosheet arrays, the newly designed flexible carbon-fiber/semimetal Bi nanosheet arrays show enhanced ultraviolet-visible (UV-vis) light absorption efficiency and photocurrent, photocatalytic, and photoelectrocatalytic activities. Photocatalytic analyses indicate that the surface plasmon resonance (SPR) of semimetal Bi occurs under solar-simulated light irradiation during the photocatalytic process. The carbon-fiber traps the hot electrons exerted from the SPR of semimetal Bi and creates holes in the semimetal Bi nanosheets, which boosts the photocatalytic activity of the carbon fiber through plasmonic sensitization. Both photocatalytic experiments and density functional theory (DFT) calculations indicate that the electrons transferred to the carbon fiber and the holes created in semimetal Bi contribute to the formation of •O₂^- and •OH, respectively. The synergistic effect between electrocatalysis and photocatalysis under the solar-simulated light results in almost complete degradation of 2,4-dinitorphenol during the photoelectrocatalytic process. This work realizes a non-noble-metal plasmonic catalyst and provides a new avenue for the commercialization of photocatalysis and photoelectrocatalysis using the separable and recyclable carbon-fiber/semimetal Bi nanosheet arrays in the environment-related field.

Hierarchical Honeycomb Br-, N-Codoped TiO2 with Enhanced Visible-Light Photocatalytic H2 Production

The halogen elements modification strategy of TiO₂ encounters a bottleneck in visible-light H₂ production. Herein, we have for the first time reported a hierarchical honeycomb Br-, N-codoped anatase TiO₂ catalyst (HM-Br,N/TiO₂) with enhanced visible-light photocatalytic H₂ production. During the synthesizing process, large amounts of meso-macroporous channels and TiO₂ nanosheets were fabricated in massive TiO₂ automatically, constructing the hierarchical honeycomb structure with large specific surface area (464 m² g^-1). cetyl trimethylammonium bromide and melamine played a key role in constructing the meso-macroporous channels. Additionally, HM-Br,N/TiO₂ showed a high visible-light H₂ production rate of 2247 μmol h^-1 g^-1, which is far more higher than single Br- or N-doped TiO₂ (0 or 63 μmol h^-1 g^-1, respectively), thereby demonstrating the excellent synergistic effects of Br and N elements in H₂ evolution. In HM-Br,N/TiO₂ catalytic system, the codoped Br-N atoms could reduce the band gap of TiO₂ to 2.88 eV and the holes on acceptor levels (N acceptor) can passivate the electrons on donor levels (Br donor), thereby preventing charge carriers recombination significantly. Furthermore, the proposed HM-Br,N/TiO₂ fabrication strategy had a wide range of choices for N source (e.g., melamine, urea, and dicyandiamide) and it can be applied to other TiO₂ materials (e.g., P25) as well, thereby implying its great potential application in visible-light H₂ production. Finally, on the basis of experimental results, a possible photocatalytic H₂ production mechanism for HM-Br,N/TiO₂ was proposed.

Converting Carbohydrates to Carbon-Based Photocatalysts for Environmental Treatment

Carbohydrates in biomass can be converted to semiconductive hydrothermal carbonation carbon (HTCC), a material that contains plenty of sp²-hybridization structures. Under solar light illumination, HTCC generates photoexcited electrons, holes, and hydroxyl radicals. These species can be used for photocatalytic treatment such as water disinfection and degradation of organic pollutants. The photocatalytic activity of HTCC can be significantly enhanced by iodine doping. The enhancement mechanism is investigated by density functional theoretical calculations and electrochemical measurements. The iodine dopants twist and optimize the structures of the sp²-hybridization in HTCC, thereby favoring photon-induced excitation. Moreover, the iodine dopants facilitate the charge transfer between different sp²-hybridization structures, thus increasing the conductivity and activity of the HTCC. An added benefit is that the I-doped HTCC exhibits lower cytotoxic effect than the pure HTCC. In addition to monosaccharides (glucose), disaccharides (sucrose), and polysaccharides (starch), we have also transformed crops (e.g., rice), plants (e.g., grass), and even agricultural waste (e.g., straw) and animal waste (e.g., cow dung). The conversion of carbohydrates to HTCC may be considered as a "Trash to Treasure" approach. We believe this discovery will attract a lot of attention from researchers involved in environmental catalysis, waste recycling, and pollution treatment.

Photocatalytic reduction of carbon dioxide using iodine-doped titanium dioxide with high exposed {001} facets under visible light

Iodine-doped titanium dioxide nanosheets with high exposed {001} facets (IFTO) were synthesized by a two-step hydrothermal treatment followed by calcination at 350 °C.

Iodide surface decoration: a facile and efficacious approach to modulating the band energy level of semiconductors for high-performance visible-light photocatalysis

Iodide surface decoration enables the wide-band-gap Bi₂O₂CO₃ to possess a continuously tunable band gap and profoundly boosted visible-light photocatalytic performance for dye degradation and NO removal.

Doping of TiO2 for sensitized solar cells

This review gives a detailed summary and evaluation of the use of TiO2 doping to improve the performance of dye sensitized solar cells. Doping has a major effect on the band structure and trap states of TiO2, which in turn affect important properties such as the conduction band energy, charge transport, recombination and collection. The defect states of TiO2 are highly dependent on the synthesis method and thus the effect of doping may vary for different synthesis techniques, making it difficult to compare the suitability of different dopants. High-throughput methods may be employed to achieve a rough prediction on the suitability of dopants for a specific synthesis method. It was however found that nearly every employed dopant can be used to increase device performance, indicating that the improvement is not so much caused by the dopant itself, as by the defects it eliminates from TiO2. Furthermore, with the field shifting from dye sensitized solar cells to perovskite solar cells, the role doping can play to further advance this emerging field is also discussed.

An overview on visible light responsive metal oxide based photocatalysts for hydrogen energy production

The present review summarizes the recent development and challenges in visible light responsive metal oxide based photocatalysts for water splitting.

Generation of oxygen vacancies in visible light activated one-dimensional iodine TiO2 photocatalysts

Oxygen vacancies induced by multi-valences of iodine in two-step hydrothermal synthesized I/TiO₂ with enhanced visible photoactivity.

Photodegradation of perfluorooctanoic acid by synthesized TiO2-MWCNT composites under 365nm UV irradiation

Degradation of perfluorooctanoic acid (PFOA) is of great importance due to its global distribution, persistence and toxicity to bioorganisms. In present study, a composite TiO(2) with multiple wall carbon nanotubes (MWCNTs) was synthesized using sol-gel method and it was used as photocatalyst to degrade PFOA in water. The prepared composite catalyst displayed significant absorption in UV to visible light region. The loading content of TiO(2) on MWCNTs could be adjusted by changing the ratio of precursor to MWCNTs. Due to the combined effect of the adsorption ability and e(-) transport capacity of MWCNT, the composites displayed much higher photocatalytic ability to PFOA as compared to pure TiO(2) under UV irradiation. The photocatalyst prepared with 10:1 of tetrabutyl titanate/MWCNT was the most effective. With the optimal dosage at 1.6 g L(-1), almost 100% of PFOA was degraded in acid medium after irradiation for 8h. It was proposed that PFOA were mainly degraded by stepwise losing a moiety of CF(2).

Single-step processing of copper-doped titania nanomaterials in a flame aerosol reactor

Synthesis and characterization of long wavelength visible-light absorption Cu-doped TiO2 nanomaterials with well-controlled properties such as size, composition, morphology, and crystal phase have been demonstrated in a single-step flame aerosol reactor. This has been feasible by a detailed understanding of the formation and growth of nanoparticles in the high-temperature flame region. The important process parameters controlled were: molar feed ratios of precursors, temperature, and residence time in the high-temperature flame region. The ability to vary the crystal phase of the doped nanomaterials while keeping the primary particle size constant has been demonstrated. Results indicate that increasing the copper dopant concentration promotes an anatase to rutile phase transformation, decreased crystalline nature and primary particle size, and better suspension stability. Annealing the Cu-doped TiO2 nanoparticles increased the crystalline nature and changed the morphology from spherical to hexagonal structure. Measurements indicate a band gap narrowing by 0.8 eV (2.51 eV) was achieved at 15-wt.% copper dopant concentration compared to pristine TiO2 (3.31 eV) synthesized under the same flame conditions. The change in the crystal phase, size, and band gap is attributed to replacement of titanium atoms by copper atoms in the TiO2 crystal.

Increasing the catalytic activities of iodine doped titanium dioxide by modifying with tin dioxide for the photodegradation of 2-chlorophenol under visible light irradiation

The photocatalytic degradation of 2-chlorophenol (2-CP) irradiated with visible light over iodine doped TiO(2) (IT) modified with SnO(2) (SIT) nanoparticles has been investigated in this study. The structure and optical properties of the SIT catalysts have been well characterized by X-ray diffraction, the Brunauer-Emmett-Teller method, transmission electron microscopy, UV-visible absorption spectra and X-ray photoelectron spectroscopy. The effects of preparation conditions, such as SnO(2) content and calcination temperature, on the photocatalytic degradation efficiency have been surveyed in detail. The improved photocatalytic activity of SIT is derived from the synergistic effect between the SnO(2) and IT, which promoted the efficiency of migration of the photogenerated carriers at the interface of the catalysts and thereby enhanced the efficiency of photon harvesting in the visible region. The action of scavengers (fluoride ion, iodide ion, tert-butyl alcohol, and persulfate ion), as well as N(2) purging on the photodegradation rate reveal that the valence band hole is mainly responsible for the effective photocatalytic removal of 2-CP and the corresponding TOC reduction.

A visible light-responsive iodine-doped titanium dioxide nanosphere

I-doped titanium dioxide nanospheres (I-TNSs) were synthesized via a two-step hydrothermal synthesis route, their potential for the efficient utilization of visible light was evaluated. The prepared anatase-phase I-TNSs had a bimodal porous size distribution with a Brunauer-Emmett-Teller surface area of 76 m2/g, a crystallite size of approximately 14 nm calculated from X-ray diffraction data, and a remarkable absorption in the visible light region at wavelengths > 400 nm. The photocatalytic activity of the samples was evaluated by decoloration of Methyl Orange in aqueous solution under visible light irradiation in comparison to the iodine-doped TiO2 (I-TiO2). The I-TNSs showed higher photocatalytic efficiency compared with I-TiO2 after irradiation for 180 min even though the latter had a much greater surface area (115 m2/g). It was concluded that the surface area was not the predominant factor determining photocatalytic activity, and that the good crystallization and bimodal porous nanosphere structure were favourable for photocatalysis.