Carbon and metal based magnetic porous materials - Role in drug removal: A Comprehensive review

Development of effective adsorbents for the removal of contaminants from wastewater is indispensable due to increasing water scarcity and a lack of pure drinking water, which are prevailing as a result of rapid industrialization and population growth. Recently, the development of new adsorbents and their effective use without generating secondary waste is receiving huge consideration. In order to protect the environment from primary and secondary pollution, the development of adsorbents from wastes and their recycling have become conventional practices aimed at waste management. As a result, significant progress has been made in the synthesis of new porous carbon and metal-organic frameworks as adsorbents, with the objective of using them for the removal of pollutants. While many different kinds of pollutants are produced in the environment, drug pollutants are the most vicious because of their tendency to undergo significant structural changes, producing metabolites and residues with entirely different properties compared to their parent compounds. Chemical reactions involving oxidation, hydrolysis, and photolysis transform drugs. The resulting compounds can have detrimental effects on living beings that are present in soil and water. This review stresses the development of adsorbents with adjustable porosities for the broad removal of primary drug pollutants and their metabolites, which are formed as a result of drug transformations in environmental matrices. This keeps adsorbents from building up in the environment and prevents them from becoming significant pollutants in the future. Additionally, it stops secondary pollution caused by the deterioration of the used adsorbents. Focus on the development of effective adsorbents with flexible porosities allows for the complete removal of coexisting contaminants and makes a substantial contribution to wastewater management. In order to concentrate more on the development of flexible pore adsorbents, it is crucial to comprehend the milestones reached in the research and applications of porous magnetic adsorbents based on metal and carbon, which are discussed here.

Tuning strategies of MIL metal organic frameworks for adsorptive removal of formaldehyde in air

Materials Institute Lavoisier (MIL) metal organic frameworks (MOFs) are known for their potential to adsorb gaseous organic pollutants. This study explores the synergistic effects between the selection of central metals (e.g., titanium, iron, and aluminum) and the incorporation of -NH2 groups in terms of adsorption efficiency against gaseous formaldehyde (FA). A group of the pristine MIL MOFs is synthesized using three different metals (i.e., titanium, iron, and aluminum) and terephthalic acid along with their NH2 derivatives using 2-aminoterephthalic acid. Among the pristine forms, MIL-125(Ti) achieves the highest FA adsorption capacity (Q) of 26.96 mg g-1 and a partition coefficient (PC) of 0.0898 mol kg-1 Pa-1. Further, amination significantly improves the FA adsorption potential of NH2-MIL-125(Ti) with a Q value of 91.22 mg g-1 (PC = 0.3038 mol kg-1 Pa-1). In situ diffuse reflectance infrared Fourier-transform spectroscopy reveals that the FA adsorption of plain MILs should be governed primarily by physisorption. In contrast, FA adsorption of NH2-MILs appears to be regulated by both physisorption and chemisorption, while the latter being affected mainly through FA-NH2 interactions (Schiff base reactions). These findings provide valuable insights into the utility of aminated MIL sorbents, possibly toward the efficient management of indoor air quality.

Exploring Defect-Engineered Metal-Organic Frameworks with 1,2,4-Triazolyl Isophthalate and Benzoate Linkers

Synthesis and characterization of DEMOFs (defect-engineered metal-organic frameworks) with coordinatively unsaturated sites (CUSs) for gas adsorption, catalysis, and separation are reported. We use the mixed-linker approach to introduce defects in Cu2-paddle wheel units of MOFs [Cu2(Me-trz-ia)2] by replacing up to 7% of the 3-methyl-triazolyl isophthalate linker (1L2-) with the "defective linker" 3-methyl-triazolyl m-benzoate (2L-), causing uncoordinated equatorial sites. PXRD of DEMOFs shows broadened reflections; IR and Raman analysis demonstrates only marginal changes as compared to the regular MOF (ReMOF, without a defective linker). The concentration of the integrated defective linker in DEMOFs is determined by 1H NMR and HPLC, while PXRD patterns reveal that DEMOFs maintain phase purity and crystallinity. Combined XPS (X-ray photoelectron spectroscopy) and cw EPR (continuous wave electron paramagnetic resonance) spectroscopy analyses provide insights into the local structure of defective sites and charge balance, suggesting the presence of two types of defects. Notably, an increase in CuI concentration is observed with incorporation of defective linkers, correlating with the elevated isosteric heat of adsorption (ΔHads). Overall, this approach offers valuable insights into the creation and evolution of CUSs within MOFs through the integration of defective linkers.

Postsynthetically Modified Alkoxide-Exchanged Ni2(OR)2BTDD: Synergistic Interactions of CO2 with Open Metal Sites and Functional Groups

Postsynthetic modifications (PSMs) of metal-organic frameworks (MOFs) play a crucial role in enhancing material performance through open metal site (OMS) functionalization or ligand exchange. However, a significant challenge persists in preserving open metal sites during ligand exchange, as these sites are inherently bound by incoming ligands. In this study, for the first time, we introduced alkoxides by exchanging bridging chloride in Ni2Cl2BTDD (BTDD=bis (1H-1,2,3,-triazolo [4,5-b],-[4',5'-i]) dibenzo[1,4]dioxin) through PSM. Rietveld refinement of synchrotron X-ray diffraction data indicated that the alkoxide oxygen atom bridges Ni(II) centers while the OMSs of the MOF are preserved. Due to the synergy of the existing OMS and introduced functional group, the alkoxide-exchanged MOFs showed CO2 uptakes superior to the pristine MOF. Remarkably, the tert-butoxide-substituted Ni_T exhibited a nearly threefold and twofold increase in CO2 uptake compared to Ni2Cl2BTDD at 0.15 and 1 bar, respectively, as well as high water stability relative to the other exchanged frameworks. Furthermore, the Grand Canonical Monte Carlo simulations for Ni_T suggested that CO2 interacts with the OMS and the surrounding methyl groups of tert-butoxide groups, which is responsible for the enhanced CO2 capacity. This work provides a facile and unique synthetic strategy for realizing a desirable OMS-incorporating MOF platform through bridging ligand exchange.

A new 1D Mn(II) coordination polymer: Synthesis, crystal structure, hirshfeld surface analysis and molecular docking studies

The synthesis of novel metal-organic coordination polymers (MOCP) with the chemical formula [Mn2L (SCN)2(OH)2]3·CH3OH [L = 1,5-bis(pyridine-4-ylmethylene) carbonohydrazide] {1} was accomplished using two different techniques: solvothermal and sonochemical ultrasonic-assisted. An investigation was carried out to examine the impact of various factors such as reaction time, sonication power, temperature, and reactant concentration on the morphology and size of the crystals. Interestingly, it was found that sonication power and temperature did not affect the crystals' morphology and size. To further analyze the prepared microcrystals of MOCPs, SEM was utilized to examine their surface morphology, and XRD, elemental evaluation composition. The identification of the functional groups present in the prepared Mn-MOCPs was accomplished through the utilization of FT-IR spectroscopy. Subsequently, the calcination of 1 in an air atmosphere at 650 °C led to the formation of Mn3O4 nanoparticles. The geometric and electronic structure of the MOCPs was evaluated using density functional theory (DFT). The utilization of molecular docking methodologies demonstrated that the best cavity of the human androgen receptor possessed an interaction energy of -116.3 kJ mol-1. This energy encompassed a combination of both bonding and non-bonding interactions. The Results showed that steric interaction and electrostatic potential are the main interactions in AR polymer and Mn(II). These interactions in the defined cavity indicated that this polymer could be an effective anti-prostate candidate, because AR is involved in the growth of prostate cancer cells, and these interactions indicated the inhibition of prostate cancer cell growth.

When Polymorphism in Metal-Organic Frameworks Enables Water Sorption Profile Tunability for Enhancing Heat Allocation and Water Harvesting Performance

The development of thermally driven water-sorption-based technologies relies on high-performing water vapor adsorbents. Here, polymorphism in Al-metal-organic frameworks is disclosed as a new strategy to tune the hydrophilicity of MOFs. This involves the formation of MOFs built from chains of either trans- or cis- µ-OH-connected corner-sharing AlO4(OH)2 octahedra. Specifically, [Al(OH)(muc)] or MIP-211, is made of trans, trans-muconate linkers, and cis-µ-OH-connected corner-sharing AlO4(OH)2 octahedra giving a 3D network with sinusoidal channels. The polymorph MIL-53-muc has a tiny change in the chain structure that results in a shift of the step position of the water isotherm from P/P0 ≈ 0.5 in MIL-53-muc, to P/P0 ≈ 0.3 in MIP-211. Solid-state NMR and Grand Canonical Monte Carlo reveal that the adsorption occurs initially between two hydroxyl groups of the chains, favored by the cis-positioning in MIP-211, resulting in a more hydrophilic behavior. Finally, theoretical evaluations show that MIP-211 would allow achieving a coefficient of performance for cooling (COPc) of 0.63 with an ultralow driving temperature of 60 °C, outperforming benchmark sorbents for small temperature lifts. Combined with its high stability, easy regeneration, huge water uptake capacity, green synthesis, MIP-211 is among the best adsorbents for adsorption-driven air conditioning and water harvesting from the air.

Design of a novel fluorescent metal-organic framework (UiO-66-NG) for the detection of boric acid in aqueous medium and bioimaging in a living plant system

UiO-66-NH2 material is a variant of Zr-based MOF most widely used for various applications, exhibiting unprecedented excellent hydrothermal and physicochemical stability. In this study, after UiO-66-NH2 reacted with chlorosulfonyl isocyanate, the fluorescent UiO-66-NG probe was prepared by interacting with the N-methylglucamine molecule. The structure of the prepared probe was confirmed by characterizing them with techniques such as FTIR, SEM, and XRD. The sensing properties of this prepared probe against different anions and cations were investigated and it was understood that it showed sensitive selectivity only for H3BO3. The H3BO3 detection limit (LOD) of the UiO-66-NG probe was determined as 1.81 μM. Boric acid was determined in real samples by using tap water, lake water, and river water. Fluorescence imaging was performed using the plant Lepidium sativum for the detection of boric acid in aqueous medium and for bio-imaging in a living plant system. These results show that the prepared UiO-66-NG can be used successfully in the determination of H3BO3 in living plants.

Laser-Driven Rapid Synthesis of Metal-Organic Frameworks and Investigation of UV-NIR Optical Absorption, Luminescence, Photocatalytic Degradation, and Gas and Ion Adsorption Properties

In this study, we designed a platform based on a laser-driven approach for fast, efficient, and controllable MOF synthesis. The laser irradiation method was performed for the first time to synthesize Zn-based MOFs in record production time (approximately one hour) compared to all known MOF production methods with comparable morphology. In addition to well-known structural properties, we revealed that the obtained ZnMOFs have a novel optical response, including photoluminescence behavior in the visible range with nanosecond relaxation time, which is also supported by first-principles calculations. Additionally, photocatalytic degradation of methylene blue with ZnMOF was achieved, degrading the 10 ppm methylene blue (MB) solution 83% during 1 min of irradiation time. The application of laser technology can inspire the development of a novel and competent platform for a fast MOF fabrication process and extend the possible applications of MOFs to miniaturized optoelectronic and photonic devices.

Experimental and Theoretical Survey of Intramolecular Spodium Bonds/σ/π-Holes and Noncovalent Interactions in Trinuclear Zn(II)-Salen Type Complex with OCN- Ions: A Holistic View in Crystal Engineering

In this work, one new centrosymmetric trinuclear Zn(II) complex 1, [{(OCN)Zn(L)}2Zn], using a salen-type ligand (H2L) in the presence of OCN- was synthesized and characterized via elemental, spectral, SEM-EDX, and single-crystal X-ray diffraction (SCXRD) study. In 1, SCXRD reveals two different stereochemical environments of zinc metal ions; one terminal Zn(II) center adopts square pyramidal geometries with the Addison parameter (τ) 0.095, and the central Zn(II) is tetracoordinated tetrahedral geometry. This article provides evidence of the significance and presence of spodium bonds (SpBs) in solid-state crystal structures involving a pseudotetrahedral environment of the central Zn-atom. X-ray structures reveal intramolecular Zn···O SpBs caused by the methoxy (-OCH3) substituent O-atom adjacent to the coordinated phenoxy O-atom. These noncovalent interactions have been thoroughly studied using density functional theory calculations at the RI-BP86[2]-D3[3]/def2-TZVP level of theory that characterizes the nature of SpBs, including the Baders quantum theory of atoms-in-molecules "QTAIM", molecular electrostatic potential (MEP) surface, and noncovalent index plot (NCI). In addition, a unique complex-isomer-based theoretical model has been vividly employed to estimate the SpBs energy in the complex. Natural bond orbital (NBO) analysis also tries to establish the differentiation between σ-hole and π-hole SpBs' natures more authentically. The complex energy frameworks were used to investigate noncovalent interactions. To better understand the different intermolecular interactions, we conducted a Hirshfeld surface, which revealed N···H (15.4%) and O···H (9.1%) contacts and Zn···O (5.1%) (SpBs).

Elucidating the redox activity of cobalt-1,2,3,4-cyclopentane-tetracarboxylic acid and 1,2,4,5-benzene-tetracarboxylic acid-based metal-organic frameworks for a hybrid supercapacitor

The development of electrode materials with extraordinary energy densities or high power densities has experienced a spectacular upsurge because of significant advances in energy storage technology. In recent years, the family of metal-organic frameworks (MOFs) has become an essential contender for electrode materials. Herein, two cobalt-based MOFs are synthesized with distinct linkers named 1,2,4,5-benzene-tetra-carboxylic acid (BTCA) and 1,2,3,4-cyclopentane-tetracarboxylic acid (CPTC). Investigations have been rigorously conducted to fully understand the effect of linkers on the electrochemical properties of Co-based MOFs. The best sample among the MOFs was used with activated carbon to create a battery-supercapacitor hybrid device. Due to its noteworthy results, specific capacity (100.3 C g-1), energy density (23 W h kg-1), power density (3400 W kg-1) and with the lowest ESR value of 0.4 Ω as well as its 95.4% capacity retention, the fabricated hybrid device was discovered to be very appealing for applications demanding energy storage. An approach for evaluating battery-supercapacitors was employed by quantifying the capacitive and diffusive contributions using Dunn's model to reflect the bulk and surface processes occurring during charge storage. This study fills the gap between supercapacitors and batteries, as well as providing a roadmap for creating a new generation of energy storage technologies with improved features.

Unidirectional Current in Layered Metal Hexacyanometallate Thin Films: Implication for Alternative Wet-Processed Electronic Materials

Rectifying behavior of alternative electronic materials is demonstrated with layered structures of a crystalline coordination network whose mixed ionic and electronic conductivity can be manipulated by switching the redox state of coordinated transition-metal ions. The coordinated transition-metal ions can convey additional functionality such as (redox)catalysis or electrochromism. In order to obtain rectifying behavior and charge trapping, layered films of such materials are explored. Specifically, layered films of iron hexacyanoruthenate (Fe-HCR) and nickel hexacyanoferrate (Ni-HCF) were formed by the combination of different deposition procedures. They comprise electrodeposition during voltammetric cycles for Fe-HCR and Ni-HCF, layer-by-layer deposition of Ni-HCF without redox chemistry, and drop casting of presynthesized Ni-HCF nanoparticles. The obtained materials were structurally characterized by X-ray diffraction analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy for nanoparticles, and scanning force microscopy (SFM). Voltammetry in 1 mol L-1 KCl and current-voltage curves (I-V curves) recorded between a conductive SFM tip and the back electrode outside of an electrolyte solution demonstrated charge trapping and rectifying behavior based on the different formal potentials of the redox centers in the films.

PEGylation of a shell over core-shell MOFs-a novel strategy for preventing agglomeration and synergism in terms of physicochemical and biological properties

We demonstrate a new strategy of PEGylation over core-shell MOFs of HKUST-1 and Cu-MOF-2 by a solvothermal method. The novel synthesized PEGylated core-shell MOFs has synergistic enhancement in terms of physicochemical and biological properties. FTIR spectroscopy and XRD analysis described the bonding characteristics of the double-shelled-core MOFs PEG@HKUST-1@CuMOF-2 and PEG@CuMOF-2@HKUST-1. XPS and EDAX spectroscopy confirmed the structural features of the PEG@core-shell MOFs. The as-synthesized PEG-modified core-shell MOFs showed a readily identifiable morphology with a reduction in particle size. The significant observation from SEM and TEM was that agglomeration disappeared completely, and the morphology of individual core-shell MOFs was clearly revealed. BET analysis provided the surface characteristics of MOF compounds. The chemical states of frameworks were established by XPS. The designed PEG-modified copper MOFs were evaluated for their activity against Gram-positive (Staphylococcus aureus, Enterococcus faecalis), Gram-negative (Escherichia coli and Klebsiella pneumoniae) bacterial species and activity against fungal species (Aspergillus niger and Candida albicans). This research work highlights a facile and synergistic approach to design promising biocompatible nano-dimensional core-shell MOFs for biological applications.

The Effect of Pendent Groups upon Flexibility in Coordination Networks with Square Lattice Topology

Gas or vapor-induced phase transformations in flexible coordination networks (CNs) offer the potential to exceed the performance of their rigid counterparts for separation and storage applications. However, whereas ligand modification has been used to alter the properties of such stimulus-responsive materials, they remain understudied compared with their rigid counterparts. Here, we report that a family of Zn2+ CNs with square lattice (sql) topology, differing only through the substituents attached to a linker, exhibit variable flexibility. Structural and CO2 sorption studies on the sql networks, [Zn(5-Ria)(bphy)]n, ia = isophthalic acid, bphy = 1,2-bis(pyridin-4-yl)hydrazine, R = -CH3, -OCH3, -C(CH3)3, -N=N-Ph, and -N=N-Ph(CH3)2, 2-6, respectively, revealed that the substituent moieties influenced both structural and gas sorption properties. Whereas 2-3 exhibited rigidity, 4, 5, and 6 exhibited reversible transformation from small pore to large pore phases. Overall, the insight into the profound effect of pendent moieties of linkers upon phase transformations in this family of layered CNs should be transferable to other CN classes.

Aptamer-modified metal organic frameworks for measurement of food contaminants: a review

The measurement of food contaminants faces a great challenge owing to the increasing demand for safe food, increasing consumption of fast food, and rapidly changing patterns of human consumption. As different types of contaminants in food products can pose different levels of threat to human health, it is desirable to develop specific and rapid methods for their identification and quantification. During the past few years, metal-organic framework (MOF)-based materials have been extensively explored in the development of food safety sensors. MOFs are porous crystalline materials with tunable composition, dynamic porosity, and facile surface functionalization. The construction of high-performance biosensors for a range of applications (e.g., food safety, environmental monitoring, and biochemical diagnostics) can thus be promoted through the synergistic combination of MOFs with aptamers. Accordingly, this review article delineates recent innovations achieved for the aptamer-functionalized MOFs toward the detection of food contaminants. First, we describe the basic concepts involved in the detection of food contaminants in terms of the advantages and disadvantages of the commonly used analytical methods (e.g., DNA-based methods (PCR/real-time PCR/multiplex PCR/digital PCR) and protein-based methods (enzyme-linked immunosorbent assay/immunochromatography assay/immunosensor/mass spectrometry). Afterward, the progress in aptamer-functionalized MOF biosensors is discussed with respect to the sensing mechanisms (e.g., the role of MOFs as signal probes and carriers for loading signal probes) along with their performance evaluation (e.g., in terms of sensitivity). We finally discuss challenges and opportunities associated with the development of aptamer-functionalized MOFs for the measurement of food contaminants.

Enhanced Solid-State Fluorescence of Flavin Derivatives by Incorporation in the Metal-Organic Frameworks MIL-53(Al) and MOF-5

The flavin derivatives 10-methyl-isoalloxazine (MIA) and 6-fluoro-10-methyl-isoalloxazine (6F-MIA) were incorporated in two alternative metal-organic frameworks, (MOFs) MIL-53(Al) and MOF-5. We used a post-synthetic, diffusion-based incorporation into microcrystalline MIL-53 powders with one-dimensional (1D) pores and an in-situ approach during the synthesis of MOF-5 with its 3D channel network. The maximum amount of flavin dye incorporation is 3.9 wt% for MIA@MIL-53(Al) and 1.5 wt% for 6F-MIA@MIL-53(Al), 0.85 wt% for MIA@MOF-5 and 5.2 wt% for 6F-MIA@MOF-5. For the high incorporation yields the probability to have more than one dye molecule in a pore volume is significant. As compared to the flavins in solution, the fluorescence spectrum of these flavin@MOF composites is broadened at the bathocromic side especially for MIA. Time-resolved spectroscopy showed that multi-exponential fluorescence lifetimes were needed to describe the decays. The fluorescence-weighted lifetime of flavin@MOF of 4 ± 1 ns also corresponds to those in solution but is significantly prolonged compared to the solid flavin dyes with less than 1 ns, thereby confirming the concept of "solid solutions" for dye@MOF composites. The fluorescence quantum yield (Φ_F) of the flavin@MOF composites is about half of the solution but is significantly higher compared to the solid flavin dyes. Both the fluorescence lifetime and quantum yield of flavin@MOF decrease with the flavin loading in MIL-53 due to the formation of various J-aggregates. Theoretical calculations using plane-wave and QM/MM methods are in good correspondence with the experimental results and explain the electronic structures as well as the photophysical properties of crystalline MIA and the flavin@MOF composites. In the solid flavins, π-stacking interactions of the molecules lead to a charge transfer state with low oscillator strength resulting in aggregation-caused quenching (ACQ) with low lifetimes and quantum yields. In the MOF pores, single flavin molecules represent a major population and the computed MIA@MOF structures do not find π-stacking interactions with the pore walls but only weak van-der-Waals contacts which reasons the enhanced fluorescence lifetime and quantum yield of the flavins in the composites compared to their neat solid state. To analyze the orientation of flavins in MOFs, we measured fluorescence anisotropy images of single flavin@MOF-5 crystals and a static ensemble flavin@MIL53 microcrystals, respectively. Based on image information, anisotropy distributions and overall curve of the time-resolved anisotropy curves combined with theoretical calculations, we can prove that all fluorescent flavins species have a defined and rather homogeneous orientation in the MOF framework. In MIL-53, the transition dipole moments of flavins are orientated along the 1D channel axis, whereas in MOF-5 we resolved an average orientation that is tilted with respect to the cubic crystal lattice. Notably, the more hydrophobic 6F-MIA exhibits a higher degree order than MIA. The flexible MOF MIL-53(Al) was optimized essentially to the experimental large-pore form in the guest-free state with QuantumEspresso (QE) and with MIA molecules in the pores the structure contracted to close to the experimental narrow-pore form which was also confirmed by PXRD. In summary, the incorporation of flavins in MOFs yields solid-state materials with enhanced rigidity, stabilized conformation, defined orientation and reduced aggregations of the flavins, leading to increased fluorescence lifetime and quantum yield as controllable photo-luminescent and photo-physical properties.

Formation of Gold Nanoclusters from Goldcarbonyl Chloride inside the Metal-Organic Framework HKUST-1

Gas-phase infiltration of the carbonylchloridogold(I), Au(CO)Cl precursor into the pores of HKUST-1 ([Cu3(BTC)2(H2O)2], Cu-BTC) SURMOFs (surface-mounted metal-organic frameworks; BTC = benzene-1,3,5-tricarboxylate) leads to Au(CO)Cl decomposition within the MOF through hydrolysis with the aqua ligands on Cu. Small Aux clusters with an average atom number of x ≈ 5 are formed in the medium-sized pores of the HKUST-1 matrix. These gold nanoclusters are homogeneously distributed and crystallographically ordered, which was supported by simulations of the powder X-ray diffractometric characterization. Aux@HKUST-1 was further characterized by scanning electron microscopy (SEM) and infrared reflection absorption (IRRA) as well as Raman spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma optical emission spectroscopy (ICP-OES).

MOFs-Modified Electrochemical Sensors and the Application in the Detection of Opioids

Opioids are widely used in clinical practice, but drug overdoses can lead to many adverse reactions, and even endanger life. Therefore, it is essential to implement real-time measurement of drug concentrations to adjust the dosage given during treatment, keeping drug levels within therapeutic levels. Metal-Organic frameworks (MOFs) and their composite materials modified bare electrode electrochemical sensors have the advantages of fast production, low cost, high sensitivity, and low detection limit in the detection of opioids. In this review, MOFs and MOFs composites, electrochemical sensors modified with MOFs for the detection of opioids, as well as the application of microfluidic chips in combination with electrochemical methods are all reviewed, and the potential for the development of microfluidic chips electrochemical methods with MOFs surface modifications for the detection of opioids is also prospected. We hope that this review will provide contributions to the study of electrochemical sensors modified with MOFs for the detection of opioids.

Coinage Metal Bis(amidinate) Complexes as Building Blocks for Self-Assembled One-Dimensional Coordination Polymers

The pyridyl functionalized amidinate [{PyC≡CC(NDipp)₂ }Li(thf)₂ ]_n was used to synthesize a series of bis-amidinate complexes [{PyC≡CC(NDipp)₂ }₂ M₂ ] (M=Cu, Ag, Au) with fully supported metallophilic interactions. These metalloligands were then used as building blocks for the synthesis of one-dimensional heterobimetallic coordination polymers using Zn(hfac)₂ (hfac=hexaflouroacetylacetonate) for self-assembly. Interestingly, the three coordination polymers [{PyC≡CC(NDipp)₂ }₂ M₂ ][Zn(hfac)₂ ] (M=Cu, Ag, Au), exhibit a zig zag shape in the solid state. To achieve linear coordination geometry other connectors such as M'(acac) (M'=Ni, Co) (acac=acetylacetonate) were investigated. The thus obtained compounds [{PyC≡CC(NDipp)₂ }₂ Cu₂ ][M'(acac)₂ ] (M'=Ni, Co) are indeed linear heterobimetallic coordination polymers featuring a metalloligand backbone with fully supported metallophilic interactions.

Enhanced sorption in an indium-acetylenedicarboxylate metal-organic framework with unexpected chains of cis-μ-OH-connected {InO6} octahedra

Single crystals of the new metal-organic framework (MOF) In-adc (HHUD-4) were obtained through the reaction of linear acetylenedicarboxylic acid (H₂adc) with In(NO₃)₃·xH₂O as a racemic conglomerate in the chiral tetragonal space groups P4₃22 and P4₁22. Fundamentally different from other MOFs with linear linkers and trans-μ-OH-connected infinite {MO₆} secondary building units as in the MIL-53-type, the linear adc^2- linker leads to the formation of cis-μ-OH connected {InO₆} polyhedra, which have otherwise only been found before for V-shaped ligands, as in CAU-10-H. A far-reaching implication of this finding is the possibility that trans-μ-OH/straight MIL-53-type MOFs will have polymorphs of CAU-10-H cis-μ-OH/helical topology and vice versa. HHUD-4 is a microporous MOF with a BET surface area of up to 940 m² g^-1 and a micropore volume of up to 0.39 cm³ g^-1. Additionally, HHUD-4 features good adsorption uptakes of 3.77 mmol g^-1 for CO₂ and 1.25 mmol g^-1 for CH₄ at 273 K and 1 bar, respectively, and a high isosteric heat of adsorption of 11.4 kJ mol^-1 for H₂ with a maximum uptake of 6.36 mmol g^-1 at 77 K and 1 bar. Vapor sorption experiments for water and volatile organic compounds (VOCs) such as benzene, cyclohexane and n-hexane yielded uptake values of 135, 269, 116 and 205 mg g^-1, respectively, at 293 K. While HHUD-4 showed unremarkable results for water uptake and low stability for water, it exhibited good stability with steep VOC uptake steps at low relative pressures and a high selectivity of 17 for benzene/cyclohexane mixtures.

Adsorbate-dependent phase switching in the square lattice topology coordination network [Ni(4,4'-bipyridine)2(NCS)2]n

Switching coordination networks (CNs) featuring stepped sorption isotherms that are accompanied by phase changes offer promise for gas storage and separation applications. However, their responsiveness to different adsorbates remains largely understudied. Herein, we report the variable switching behaviour of a previously known square lattice (sql) topology CN, [Ni(4,4'-bipyridine)₂(NCS)₂] (sql-1-Ni-NCS), with respect to nine gaseous adsorbates.

Vapor-Phase Adsorption of Xylene Isomers and Ethylbenzene in MOF-74 Thin Films

Thin films of Co-MOF-74 and Ni-MOF-74 were synthesized on Au-coated quartz crystal microbalance substrates by a vapor-assisted conversion (VAC) method that precludes the need for activation via postsynthetic solvent exchange. All thin films were structurally characterized by powder X-ray diffraction, reflection-absorption infrared spectroscopy, and Raman spectroscopy. Scanning electron microscopy (SEM) images reveal that the Ni-MOF-74 films exists as a dense base layer with hemispherical protrusions on the surface. In contrast, the scanning electron microscopy images of the Co-MOF-74 thin films show a rough surface with spherical deposits. The thin film morphologies were different than the powders resulting from the bulk synthesis. Gravimetric vapor-phase adsorption measurements for xylene isomers and ethylbenzene within Co-MOF-74 and Ni-MOF-74 thin films were conducted, and the results were compared with those reported for the corresponding bulk powders. Despite different morphologies, the saturation capacities of Ni-MOF-74 and Co-MOF-74 thin films were found to be nearly equivalent to those reported for the bulk powders. The results demonstrate that the VAC method can produce MOF-74 thin films that retain the intrinsic properties that are observed in bulk powders.

Acetylenedicarboxylate as a linker in the engineering of coordination polymers and metal-organic frameworks: challenges and potential

Despite its simplicity as a short and rod-like linear linker, acetylenedicarboxylate (ADC) has for a long time been somewhat overlooked in the engineering of coordination polymers (CPs) and especially in the construction of porous metal-organic frameworks (MOFs). This situation seems to be stemming from the thermosensitivity of the free acid (H₂ADC) precursor and its dicarboxylate, which makes the synthesis of their CP- and MOF-derivatives, as well as the evacuation of guest molecules from their pores, challenging. However, an increasing number of publications dealing with the synthesis, structural characterization and properties of ADC-based CPs and MOFs, disclose ways to tackle this obstacle. In this regard, using mostly room temperature solution synthesis or mechanochemical synthesis, and very rarely solvothermal synthesis, the ADC linker has successfully been used to form one-, two-, and three-dimensional CPs with metal cations from almost all groups of the periodic table of the elements, whereby its carboxylate groups adopt mainly all types of known coordination modes. ADC-based CPs feature properties, including negative thermal expansion, formation of non-centrosymmetric networks, long-range magnetic ordering, and solid-state polymerization. The first ADC-based microporous MOFs were obtained with Ce(IV), Hf(IV) and Zr(IV), in which the presence of the -CC- triple-bond within their backbone results in high hydrophilicity, high CO₂ adsorption capacity and enthalpy, as well as the uptake of halogen vapors. This discloses the potential of ADC-MOFs for gas storage/separation and water adsorption-based applications. Furthermore, H₂ADC/ADC was discovered to undergo facile in situ hydrohalogenation to yield halogen-functionalized fumarate-based CPs/MOFs. This review surveys investigations on ADC-based coordination polymers and metal-organic frameworks, and is intended to stimulate interest on this linker in chemists working in the fields of crystal chemistry or materials science.

The Chemistry and Applications of Metal-Organic Frameworks (MOFs) as Industrial Enzyme Immobilization Systems

Enzymatic biocatalysis is a sustainable technology. Enzymes are versatile and highly efficient biocatalysts, and have been widely employed due to their biodegradable nature. However, because the three-dimensional structure of these enzymes is predominantly maintained by weaker non-covalent interactions, external conditions, such as temperature and pH variations, as well as the presence of chemical compounds, can modify or even neutralize their biological activity. The enablement of this category of processes is the result of the several advances in the areas of molecular biology and biotechnology achieved over the past two decades. In this scenario, metal–organic frameworks (MOFs) are highlighted as efficient supports for enzyme immobilization. They can be used to ‘house’ a specific enzyme, providing it with protection from environmental influences. This review discusses MOFs as structures; emphasizes their synthesis strategies, properties, and applications; explores the existing methods of using immobilization processes of various enzymes; and lists their possible chemical modifications and combinations with other compounds to formulate the ideal supports for a given application.

Iodine Uptake by Zr-/Hf-Based UiO-66 Materials: The Influence of Metal Substitution on Iodine Evolution

Many works reported the encapsulation of iodine in metal-organic frameworks as well as the I₂ → I₃^- chemical conversion. This transformation has been examined by adsorbing gaseous iodine on a series of UiO-66 materials and the different Hf/Zr metal ratios (0-100% Hf) were evaluated during the evolution of I₂ into I₃^-. The influence of the hafnium content on the UiO-66 structure was highlighted by PXRD, SEM images, and gas sorption tests. The UiO-66(Hf) presented smaller lattice parameter (a = 20.7232 Å), higher crystallite size (0.18 ≤ Φ ≤ 3.33 μm), and smaller SSA_BET (818 m²·g^-1) when compared to its parent UiO-66(Zr) ─ a = 20.7696 Å, 100 ≤ Φ ≤ 250 nm, and SSA_BET = 1262 m²·g^-1. The effect of replacing Zr atoms by Hf in the physical properties of the UiO-66 was deeply evaluated by a spectroscopic study using UV-vis, FTIR, and Raman characterizations. In this case, the Hf presence reduced the band gap of the UiO-66, from 4.07 eV in UiO-66(Zr) to 3.98 eV in UiO-66(Hf). Furthermore, the UiO-66(Hf) showed a blue shift for several FTIR and Raman bands, indicating a stiffening on the implied interatomic bonds when comparing to UiO-66(Zr) spectra. Hafnium was found to clearly favor the capture of iodine [285 g·mol^-1, against 230 g·mol^-1 for UiO-66(Zr)] and the kinetic evolution of I₂ into I₃^- after 16 h of I₂ filtration. Three iodine species were typically identified by Raman spectroscopy and chemometric analysis. These species are as follows: "free" I₂ (206 cm^-1), "perturbed" I₂ (173 cm^-1), and I₃^- (115 and 141 cm^-1). It was also verified, by FTIR spectroscopy, that the oxo and hydroxyl groups of the inorganic [M₆O₄(OH)₄] (M = Zr, Hf) cluster were perturbed after the adsorption of I₂ into UiO-66(Hf), which was ascribed to the higher acid character of Hf. Finally, with that in mind and considering that the EPR results discard the possibility of a redox phenomenon involving the tetravalent cations (Hf⁴⁺ or Zr⁴⁺), a mechanism was proposed for the conversion of I₂ into I₃^- in UiO-66─based on an electron donor-acceptor complex between the aromatic ring of the BDC linker and the I₂ molecule.

Metal-Organic Framework Fabricated V2O5 Cathode Material for High-Performance Lithium-Ion Batteries

In this article, oval-shaped V2O5 nanoparticles were hydrothermally synthesized using a metal-organic framework (MOF), which was then followed by calcination under an air atmosphere. The obtained sample was characterized through various characterization techniques to determine the sample purity and the structural and morphological details. Since V2O5 possesses a layered crystal structure, it exhibits promising electrochemical performances as a cathode material for lithium-ion battery applications. However, poor cycling and inferior rate capabilities are the major issues that limit its application. Thus, a strategy to fabricate unique oval-shaped V2O5 nanoparticles was employed here to improve electrochemical performances using an MOF, which acts as a template and provides a skeleton for the growth of a novel nanostructure. It is believed that the oval-shaped morphology is beneficial to achieving better electrochemical results due to the large surface area and the existence of numerous channels for lithiation and de-lithiation. The obtained electrochemical result reveals that the V2O5 electrode can be considered a prominent cathode material for next-generation lithium-ion battery applications.

Advanced MOFs@aerogel composites: Construction and application towards environmental remediation

Environmental pollution has drawn forth advanced materials and progressive techniques concentrating on sustainable development. Metal-organic frameworks (MOFs) have aroused vast interest resulting from their excellent property in structure and function. Conversely, powdery MOFs in highly crystalline follow with fragility, poor processability and recoverability. Aerogels distinguished by the unique three-dimensional (3D) interconnected pore structures with high porosity and accessible surface area are promising carriers for MOFs. Given these, combining MOFs with aerogels at molecule level to obtain advanced composites is excepted to further enhance their performance with higher practicability. Herein, we focus on the latest studies on the MOFs@aerogel composites. The construction of MOFs@aerogel with different synthetic routes and drying methods are discussed. To explore the connection between structure and performance, pore structure engineering and quantitation of MOFs content are outlined. Furthermore, various types of MOFs@aerogel composites and their carbonized derivatives are reviewed, as well as the applications of MOFs@aerogel for environmental remediation referring to water purification and air clearing. More importantly, outlooks towards these emerging advanced composites have been presented from the perspective of practical application and future development.

Sensitive Electrochemical Sensor Based On an Aminated MIL-101(Cr) MOF for the Detection of Tartrazine

The aminated metal-organic framework H₂N-MIL-101(Cr) was used as the carbon paste electrode (CPE) modifier for the determination of tartrazine (Tz) in soft drinks. The amino material was characterized by electrochemical impedance spectroscopy and showed significantly faster electron transfer with lower charge-transfer resistance (0.13 kΩ) compared to the electrode modified with the unfunctionalized MIL-101(Cr) material (1.1 kΩ). The H₂N-MIL-101(Cr)-modified CPE [H₂N-MIL-101(Cr)-CPE] was then characterized by cyclic voltammetry (CV) using [Fe(CN)₆]^3- and [Ru(NH₃)₆]³⁺ ions as the redox probes, showing good accumulation of [Fe(CN)₆]^3- ions on the electrode surface. A CV scan of Tz in Britton Robinson buffer solution revealed an irreversible system with an oxidation peak at +0.998 V versus Ag/AgCl/KCl. Using CV and differential pulse voltammetry, an electrochemical method for quantifying Tz in aqueous medium was then developed. Several parameters that affect the accumulation and detection steps were optimized. Optimal detection of Tz was achieved after 180 s of accumulation in Britton Robinson buffer solution (pH 2) using 2 mg of H₂N-MIL-101(Cr) material. Under optimal conditions, the sensor exhibited a linear response in the concentration range of 0.004-0.1 μM and good detection sensitivity (35.4 μA μM^-1), and the detection limit for Tz was found to be 1.77 nM (S/N = 3). Satisfactory repeatability, stability, and anti-interference performance were also achieved on H₂N-MIL-101(Cr)-CPE. The sensor was applied to commercial juices, and the results obtained were approximately similar to those given by UV-vis spectrophotometry.

MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review

With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.

Metal-Organic Framework-Based Materials for Adsorption and Detection of Uranium(VI) from Aqueous Solution

The steady supply of uranium resources and the reduction or elimination of the ecological and human health hazards of wastewater containing uranium make the recovery and detection of uranium in water greatly important. Thus, the development of effective adsorbents and sensors has received growing attention. Metal-organic frameworks (MOFs) possessing fascinating characteristics such as high surface area, high porosity, adjustable pore size, and luminescence have been widely used for either uranium adsorption or sensing. Now pertinent research has transited slowly into simultaneous uranium adsorption and detection. In this review, the progress on the research of MOF-based materials used for both adsorption and detection of uranium in water is first summarized. The adsorption mechanisms between uranium species in aqueous solution and MOF-based materials are elaborated by macroscopic batch experiments combined with microscopic spectral technology. Moreover, the application of MOF-based materials as uranium sensors is focused on their typical structures, sensing mechanisms, and the representative examples. Furthermore, the bifunctional MOF-based materials used for simultaneous detection and adsorption of U(VI) from aqueous solution are introduced. Finally, we also discuss the challenges and perspectives of MOF-based materials for uranium adsorption and detection to provide a useful inspiration and significant reference for further developing better adsorbents and sensors for uranium containment and detection.

Synthesis, Structural Characterization, and Water Vapor Sorption Behavior of Two Ligand Ratio-Dependent Supramolecular Networks, [Cd(2,2'-bpym)1.5(BDC)]·0.5(2,2'-bpym)·5H2O and [Cd(2,2'-bpym)0.5(BDC)(H2O)3]

Two ligand ratio-dependent supramolecular networks, [Cd(2,2'-bpym)_1.5(BDC)]·0.5(2,2'-bpym)·5H₂O (1) and [Cd(2,2'-bpym)_0.5(BDC)(H₂O)₃] (2), (BDC^2- = dianion of terephthalic acid and 2,2'-bpym = 2,2'-bipyrimidine) have been synthesized and structurally characterized by the single-crystal X-ray diffraction method. Structural determination reveals that compound 1 is a two-dimensional (2D) layered metal-organic framework (MOF) constructed via the bridges of Cd(II) ions with 2,2'-bpym and BDC^2- ligands, and compound 2 is a zero-dimensional (0D) 2,2'-bpym-bridged di-Cd(II) monomeric complex. When the thermally dehydrated powders of 1 (at 100 °C) were immersed into water solution, most of the dehydrated powders of 1 underwent structural transformation back to rehydrated 1, but very little amounts of the dehydrated powders of 1 were decomposed to light-brown crystals of 2 or colorless crystals of a new coordination polymer (CP), [Cd(2,2'-bpym)(BDC)(H₂O)]·3H₂O (3), with its one-dimensional (1D) zigzag chain-like framework being constructed via the bridges of Cd(II) ions with the BDC^2- ligand. Structural analysis reveals that all 3D supramolecular networks of 1-3 are further constructed via strong intermolecular interactions, including hydrogen bonds and π-π stacking interactions. Compounds 1 and 2 both exhibit significant water vapor hysteresis isotherms, and their cyclic water de-/adsorption behavior accompanied with solid-state structural transformation has been verified by de-/rehydration TG analyses and powder X-ray diffraction (PXRD) measurements.

Iodine-Chemisorption, Interpenetration and Polycatenation: Cationic MOFs and CPs from Group 13 Metal Halides and Di-Pyridyl-Linkers

Eight cationic, two-dimensional metal-organic frameworks (MOFs) were synthesized in reactions of the group 13 metal halides AlBr3 , AlI3 , GaBr3 , InBr3 and InI3 with the dipyridyl ligands 1,2-di(4-pyridyl)ethylene (bpe), 1,2-di(4-pyridyl)ethane (bpa) and 4,4'-bipyridine (bipy). Seven of them follow the general formula 2 ∞ [MX2 (L)2 ]A, M=Al, In, X=Br, I, A- =[MX4 ]- , I- , I3 - , L=bipy, bpa, bpe. Thereby, the porosity of the cationic frameworks can be utilized to take up the heavy molecule iodine in gas-phase chemisorption vital for the capture of iodine radioisotopes. This is achieved by switching between I- and the polyiodide I3 - in the cavities at room temperature, including single-crystal-to-single-crystal transformation. The MOFs are 2D networks that exhibit (4,4)-topology in general or (6,3)-topology for 2 ∞ [(GaBr2 )2 (bpa)5 ][GaBr4 ]2 ⋅bpa. The two-dimensional networks can either be arranged to an inclined interpenetration of the cationic two-dimensional networks, or to stacked networks without interpenetration. Interpenetration is accompanied by polycatenation. Due to the cationic character, the MOFs require the counter ions [MX4 ]- , I- or I3 - counter ions in their pores. Whereas the [MX4 ]- , ions are immobile, iodide allows for chemisorption. Furthermore, eight additional coordination polymers and complexes were identified and isolated that elaborate the reaction space of the herein reported syntheses.

Flexible Cu3(HHTP)2 MOF Membranes for Gas Sensing Application at Room Temperature

Mixed matrix membranes (MMMs), possessing high porosity, have received extensive attention for gas sensing applications. However, those with high flexibility and significant sensitivity are rare. In this work, we report on the fabrication of a novel membrane, using Cu₃(HHTP)₂ MOF (Cu-MOF) embedded in a polymer matrix. A solution comprising a homogenous suspension of poly-vinyl alcohol (PVA) and ionic liquid (IL), and Cu-MOF solid particles, was cast onto a petri dish to obtain a flexible membrane (215 μm in thickness). The sensor membrane (Cu-MOF/PVA/IL), characterized for its structure and morphology, was assessed for its performance in sensing against various test gases. A detection limit of 1 ppm at 23 °C (room temperature) for H₂S was achieved, with a response time of 12 s. Moreover, (Cu-MOF/PVA/IL) sensor exhibited excellent repeatability, long-term stability, and selectivity towards H₂S gas. The other characteristics of the (Cu-MOF/PVA/IL) sensor include high flexibility, low cost, low-power consumption, and easy fabrication technique, which nominate this sensor as a potential candidate for use in practical industrial applications.

Nickel-Based Metal-Organic Frameworks as Electrocatalysts for the Oxygen Evolution Reaction (OER)

The exploration of earth-abundant electrocatalysts with high performance for the oxygen evolution reaction (OER) is eminently desirable and remains a significant challenge. The composite of the metal-organic framework (MOF) Ni₁₀Co-BTC (BTC = 1,3,5-benzenetricarboxylate) and the highly conductive carbon material ketjenblack (KB) could be easily obtained from the MOF synthesis in the presence of KB in a one-step solvothermal reaction. The composite and the pristine MOF perform better than commercially available Ni/NiO nanoparticles under the same conditions for the OER. Activation of the nickel-cobalt clusters from the MOF can be seen under the applied anodic potential, which steadily boosts the OER performance. Ni₁₀Co-BTC and Ni₁₀Co-BTC/KB are used as sacrificial agents and undergo structural changes during electrochemical measurements, the stabilized materials show good OER performances.