Room temperature synthesis of highly hemocompatible hydroxyapatite, study of their physical properties and spectroscopic correlation of particle size

Facet-Dependent Bactericidal Activity of Ag3PO4 Nanostructures against Gram-Positive/Negative Bacteria

Ag₃PO₄ nanostructures (APNs) containing silver (Ag metal; of the noble metal families) have the potential to exhibit enzyme-mimetic activity. A nanostructure shape, including its surface facets, can improve the bioactivity of enzyme mimicry, yet the molecular mechanisms remain unclear. Herein, we report facet-dependent peroxidase and oxidase-like activity of APNs with both antibacterial and biofilm degrading properties through the generation of reactive oxygen species. Cubic APNs had superior antibacterial effects than rhombic dodecahedral shapes when inhibiting Gram-positive and Gram-negative bacterial pathogen proliferation and biofilm degradation. A similar performance was observed for rhombic dodecahedral shapes, being greater than tetrahedral-shaped APNs. The extent of enzyme-mimetic activity is attributed to the facets {100} present in cubic APNs that led the peroxide radicals to inhibit the proliferation of bacteria and degrade biofilm. These facets were compared to rhombic dodecahedral APNs {110} and tetrahedral APNs {111}, respectively, to reveal a facet-dependent enhanced antibacterial activity, providing a plausible mechanism for shape-dependent APNs material enzyme-mimetic effects on bacteria. Thus, our research findings can provide a direction to optimize bactericidal materials using APNs in clinically relevant applications.

PEG functionalization effect of silicate-containing hydroxyapatite particles on effective collagen fibrillation with hydration layer state change

Silicate-containing hydroxyapatite (SiHA) particles were synthesized and functionalized with polyethylene glycol-silane (PEG-silane) for clarifying the effect of the bioceramic surface hydration layer states on the collagen (Col) fibrillation degree. Plate-like SiHA particles were obtained containing the SiO₄^4- ion inside and/or outside the particles. PEG-silane was successfully functionalized on SiHA particles, and the hydration layer and Col adlayer states on the particles were precisely investigated for exemplifying the importance of the water molecular states at the interface. The ratio of free to intermediate water in the hydration layers of the particles decreased when containing silicate components, and it significantly increased with increasing PEG-silane molecular occupancy, where the asymmetric stretching vibration component ratio in the free water clearly increased. In a quartz crystal microbalance with dissipation (QCM-D) measurement, the frequency change (Δf) and the energy dissipation change (ΔD) values increased with Col adsorption on the particles for 32-34 min and then Δf slightly increased (or stopped increasing) and ΔD dramatically increased, indicating the effective water mobility and state changes with the Col fibrillation at the interface. The Col fibrillation degree evaluated by tan δ and the protein secondary structure of the adlayers clearly increased due to the PEG-silane functionalization, and the tendency was supported by the increase in the fibril density under SEM observation. Surprisingly, it was found that the fibrillation degree based on the protein secondary structure was significantly correlated with the asymmetric stretching vibration component ratio in the free water molecules of the hydration layer on the particles, suggesting the importance of the hydration layer states on bioceramics for controlling Col fibrillation.

Influence of Fish Scale-Based Hydroxyapatite on Forcespun Polycaprolactone Fiber Scaffolds

Marine waste byproducts, especially fish scales, have proved to be one of the most prominent sources for developing sustainable materials for various applications including biomedical applications. Hydroxyapatite (HAp), being one of such biomaterials that can be synthesized from the massive fish-based waste, has received plentitude of attention due to its excellent ability to promote cell growth and proliferation. However, understanding the influence of HAp on polymer matrices that are tailored for biomedical applications is still a challenge. This study is intended to develop a sophisticated yet inexpensive method to obtain nonwoven polycaprolactone (PCL) nanofibrous scaffolds and analyze the influence of calcium-deficient nanoporous hydroxyapatite (n-HAp) on the thermal, mechanical, and biological properties of these scaffolds. The n-HAp is synthesized using two different types of fish scales, carpa (CA) and pink perch (PP), by calcination followed by nanomilling. The synthesized n-HAp powder is characterized by using X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy. The PCL fibrous scaffolds were developed using a novel forcespinning technique with n-HAp as the filler. The morphology of the scaffolds was characterized using SEM and Raman spectroscopy. SEM and TEM results have confirmed the size reduction of the HAp powder after nanomilling. Thermal properties were analyzed using thermogravimetric analysis and differential scanning calorimetry. The major degradation temperature has increased by 3° and was observed to be 398° for 1 wt % filler loading for both carpa and pink perch-derived n-HAp. The increase in filler content has increased the residue left after decomposition and is 4% for 5 wt % filler loading. The crystallinity percent has increased by 7% compared to neat fibers for 1 wt % filler loading. Mechanical properties were tested using tensile tests. The tensile test strength has shown 32% improvement for 1 wt % compared to neat fibers. Cell viability tests were performed using hFOB cells which have shown significant cell growth for a high filler loading of 5 wt %. The results suggest that both CA-n-HAP and PP-n-Hap-incorporated fibrous scaffolds can be used potentially for biomedical applications after careful investigation of the scaffold behavior with longer incubation periods.

Interfacial adhesion and surface bioactivity of anodized titanium modified with SiON and SiONP surface coatings

Titanium (Ti) surface modification via coating technologies (plasma spraying, electron-beam deposition) has been used to enhance bone-implant bonding by increasing the rate of hydroxyapatite (HA) formation, a property known as bioactivity. Regardless the enhancement in the surface activity, the high fabrication-temperature (> 600 °C) reduces coating-implant adhesion due to thermal expansion mismatch and reduces bioactivity due to increased crystallinity in the coating. Thus, amorphous surface coatings with strong Ti-substrate adhesion that can be fabricated at relatively low temperatures are crucially needed for enhanced osseointegration. Therefore, this study aimed to enhance the Ti surface bioactivity via strongly adherent bioactive thin film coatings deposited by low temperature (< 400 °C) plasma enhanced chemical vapor deposition technique on nanopore anodized-Ti (A-Ti) surface. Two groups of coating (silicon oxynitride (SiON) and silicon oxynitrophosphide (SiONP)) were deposited on anodized Ti and tested for interfacial adhesion and surface bioactivity. TEM and XPS were used to investigate the interfacial composition while interfacial adhesion was tested using nano-indentation tests which indicated a strong interfacial adhesion between the coatings and the A-Ti substrate. Surface bioactivity of the modified Ti was tested by comprehensive surface characterization (i.e., chemical composition, surface energy, morphology, and mechanical properties) and apatite formation on each surface. SiONP coating significantly enhanced the Ti surface bioactivity that presented the highest surface coverage of carbonated hydroxyapatite (HCA, ~ 40%) with a Ca/P ratio (~ 1.65) close to the stoichiometric hydroxyapatite (~ 1.67) found in bone biomineral. The HCA structure and morphology were confirmed by HR-TEM/SAED, XRD, FT-IR, and HR-SEM/EDX. MSCs in-vitro studies indicated preferable cells adhesion and proliferation on the modified surfaces without any cytotoxic effects. This study concluded that the improved surface bioactivity of Ti-SiON and Ti-SiONP coatings suggests their potential use as strongly adherent bioactive surface coatings for Ti implants.

Applications of Calcium-Based Nanomaterials in Osteoporosis Treatment

With rapidly aging populations worldwide, osteoporosis has become a serious global public health problem. Caused by disordered systemic bone remodeling, osteoporosis manifests as progressive loss of bone mass and microarchitectural deterioration of bone tissue, increasing the risk of fractures and eventually leading to osteoporotic fragility fractures. As fracture risk increases, antiosteoporosis treatments transition from nonpharmacological management to pharmacological intervention, and finally to the treatment of fragility fractures. Calcium-based nanomaterials (CBNMs) have unique advantages in osteoporosis treatment because of several characteristics including similarity to natural bone, excellent biocompatibility, easy preparation and functionalization, low pH-responsive disaggregation, and inherent pro-osteogenic properties. By combining additional ingredients, CBNMs can play multiple roles to construct antiosteoporotic biomaterials with different forms. This review covers recent advances in CBNMs for osteoporosis treatment. For ease of understanding, CBNMs for antiosteoporosis treatment can be classified as locally applied CBNMs, such as implant coatings and filling materials for osteoporotic bone regeneration, and systemically administered CBNMs for antiosteoporosis treatment. Locally applied CBNMs for osteoporotic bone regeneration develop faster than the systemically administered CBNMs, an important consideration given the serious outcomes of fragility fractures. Nevertheless, many innovations in construction strategies and preparation methods have been applied to build systemically administered CBNMs. Furthermore, with increasing interest in delaying osteoporosis progression and avoiding fragility fracture occurrence, research into systemic administration of CBNMs for antiosteoporosis treatment will have more development prospects. Deep understanding of the CBNM preparation process and optimizing CBNM properties will allow for increased application of CBNMs in osteoporosis treatments in the future.

Injectable polyelectrolyte complex-nascent HAP biodegradable antibiotic delivery system for the treatment of osteomyelitis

An injectable osteoconductive polyelectrolyte complex -hydroxyapatite formulation capable of controlled delivery of ciprofloxacin has been developed from a novel biodegradable polyelectrolyte complex and antibiotic loaded nascent hydroxyapatite (n-HAP) for the treatment of osteomyelitis. A single source (chitosan) derived polyelectrolytes were complexed in situ in the presence of n-HAP, pre-loaded with ciprofloxacin. The PEC- (n-HAP) nanoformulation (HPEC) was characterized by FT-IR, XRD, TGA and TEM analyses. HPEC combines functionalities of n-HAP (crystallinity and osteoconductivity) as well as PEC (biodegradable hydrophilic electrostatically bound macromolecular network) imparting better control over swelling and degradation kinetics favourable for drug release and transport of micronutrients. MTT assay and cytoskeleton staining (MG 63 cells) established cytocompatibility of HPEC. Early biomimetic mineralization of apatite was manifested under simulated physiological condition with a Ca/P of 1.23 (day 3) and 1.55 (day 6) complimented by in vitro biomineralization of MG-63 and Human Osteosarcoma (HOS) cells in a week (Alizarin Red S staining), which was further validated by calcium quantification. Antibacterial efficacy of HPEC has been evaluated by delivery kinetics of ciprofloxacin and by disc diffusion method against S. aureus and E. coli. The injectable system therefore possesses unique combination of functionalities: osteoconduction enriched with early biomineralization, antibacterial activity and is biodegradable; hence highly suitable for osteomyelitis treatment.

Precipitation at Room Temperature as a Fast and Versatile Method for Calcium Phosphate/TiO2 Nanocomposites Synthesis

The constantly growing need for advanced bone regeneration materials has motivated the development of calcium phosphates (CaPs) composites with a different metal or metal-oxide nanomaterials and their economical and environmentally friendly production. Here, two procedures for the synthesis of CaPs composites with TiO₂ nanoplates (TiNPl) and nanowires (TiNWs) were tested, with the immersion of TiO₂ nanomaterials (TiNMs) in corrected simulated body fluid (c-SBF) and precipitation of CaP in the presence of TiNMs. The materials obtained were analyzed by powder X-ray diffraction, spectroscopic and microscopic techniques, Brunauer–Emmett–Teller surface area analysis, thermogravimetric analysis, dynamic and electrophoretic light scattering, and their hemocompatibility and ability to induce reactive oxygen species were evaluated. After 28 days of immersion in c-SBF, no significant CaP coating was formed on TiNMs. However, the composites with calcium-deficient apatite (CaDHA) were obtained after one hour in the spontaneous precipitation system. In the absence of TiNMs, CaDHA was also formed, indicating that control of the CaP phase formed can be accomplished by fine-tuning conditions in the precipitation system. Although the morphology and size of crystalline domains of CaDHA obtained on the different nanomaterials differed, no significant difference was detected in their local structure. Composites showed low reactive oxygen species (ROS) production and did not induce hemolysis. The results obtained indicate that precipitation is a suitable and fast method for the preparation of CaPs/TiNMs nanocomposites which shows great potential for biomedical applications.

Cobalt doped nano-hydroxyapatite incorporated gum tragacanth-alginate beads as angiogenic-osteogenic cell encapsulation system for mesenchymal stem cell based bone tissue engineering

Angiogenic-osteogenic cell encapsulation system is a technical need for human mesenchymal stem cell (hMSC)-based bone tissue engineering (BTE). Here, we have developed a highly efficient hMSC encapsulation system by incorporating bivalent cobalt doped nano-hydroxyapatite (HAN) and gum tragacanth (GT) as angiogenic-osteogenic components into the calcium alginate (CA) beads. Physico-chemical characterizations revealed that the swelling and degradation of HAN incorporated CA-GT beads (GT-HAN) were 1.34 folds and 2 folds higher than calcium alginate (CA) beads. Furthermore, the diffusion coefficient of solute molecule was found 2.5-fold higher in GT-HAN with respect to CA bead. It is observed that GT-HAN supports the long-term viability of encapsulated hMSC and causes 50% less production of reactive oxygen species (ROS) in comparison to CA beads. The expression of osteogenic differentiation markers was found 1.5-2.5 folds higher in the case of GT-HAN in comparison to CA. A similar trend was observed for hypoxia inducible factor 1 alpha (HIF-1α) and vascular endothelial growth factor (VEGF). The soluble secretome from hMSC encapsulated in the GT-HAN induced proliferation of endothelial cells and supported tube formation (2.5-fold higher than CA beads). These results corroborated that GT-HAN could be used as an angiogenic-osteogenic cell encapsulation matrix for hMSC encapsulation and BTE application.

Hydroxyapatite as a biomaterial - a gift that keeps on giving

The synthetic analogue to biogenic apatite, hydroxyapatite (HA) has a number of physicochemical properties that make it an attractive candidate for diagnosis, treatment of disease and augmentation of biological tissues. Here we describe some of the recent studies on HA, which may provide bases for a number of new medical applications. The content of this review is divided to different medical application modes utilizing HA, including tissue engineering, medical implants, controlled drug delivery, gene therapies, cancer therapies and bioimaging. A number of advantages of HA over other biomaterials emerge from this discourse, including (i) biocompatibility, (ii) bioactivity, (iii) relatively simple synthesis protocols for the fabrication of nanoparticles with specific sizes and shapes, (iv) smart response to environmental stimuli, (v) facile functionalization and surface modification through noncovalent interactions, and (vi) the capacity for being simultaneously loaded with a wide range of therapeutic agents and switched to bioimaging modalities for uses in theranostics. A special section is dedicated to analysis of the safety of particulate HA as a component of parenterally administrable medications. It is concluded that despite the fact that many benefits come with the usage of HA, its deficiencies and potential side effects must be addressed before the translation to the clinical domain is pursued. Although HA has been known in the biomaterials world as the exemplar of safety, this safety proves to be the function of size, morphology, surface ligands and other structural and compositional parameters defining the particles. For this reason, each HA, especially when it comes in a novel structural form, must be treated anew from the safety research angle before being allowed to enter the clinical stage.

Directing Stem Cell Commitment by Amorphous Calcium Phosphate Nanoparticles Incorporated in PLGA: Relevance of the Free Calcium Ion Concentration

The microenvironment of mesenchymal stem cells (MSCs) is responsible for the modulation in MSC commitment. Nanocomposites with an inorganic and an organic component have been investigated, and osteogenesis of MSCs has been attributed to inorganic phases such as calcium phosphate under several conditions. Here, electrospun meshes and two-dimensional films of poly(lactic-co-glycolic acid) (PLGA) or nanocomposites of PLGA and amorphous calcium phosphate nanoparticles (PLGA/aCaP) seeded with human adipose-derived stem cells (ASCs) were analyzed for the expression of selected marker genes. In a two-week in vitro experiment, osteogenic commitment was not found to be favored on PLGA/aCaP compared to pure PLGA. Analysis of the medium revealed a significant reduction of the Ca²⁺ concentration when incubated with PLGA/aCaP, caused by chemical precipitation of hydroxyapatite (HAp) on aCaP seeds of PLGA/aCaP. Upon offering a constant Ca²⁺ concentration, however, the previously observed anti-osteogenic effect was reversed: alkaline phosphatase, an early osteogenic marker gene, was upregulated on PLGA/aCaP compared to pristine PLGA. Hence, in addition to the cell–material interaction, the material–medium interaction was also important for the stem cell commitment here, affecting the cell–medium interaction. Complex in vitro models should therefore consider all factors, as coupled impacts might emerge.

Synthesis of nanostructured silica/hydroxyapatite hybrid particles containing amphiphilic triblock copolymer for effectively controlling hydration layer structures with cytocompatibility

We synthesized nanostructured mesoporous silica (MS)/hydroxyapatite (HA) hybrid particles in the presence of amphiphilic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO₂₀PPO₇₀PEO₂₀) triblock copolymer (P123). The particles exhibited slit-shaped mesostructures and underwent hybridization reaction between the MS and HA phases containing P123. Furthermore, the aggregated form of the particles exhibited dispersion stability in water in the monodispersed state (average particle size: 145 nm and coefficient of variation: 4.3% in the case of the maximum added amount of P123). Then, the structures of the hydration layer and the adsorbed protein on the particles were investigated to understand the effect of the hydration layer structures on the protein secondary structures. The ratio of the bonding water (intermediate and nonfreezing water) to free water increased upon hybridization, and it decreased with increasing P123 concentration. Upon hybridization, the component ratio of the asymmetric O-H stretching vibration between free water molecules decreased, and that of the symmetric O-H stretching vibration of intermediate water molecules increased. With increasing P123 concentration, the asymmetric O-H stretching vibration between free water molecules increased and the symmetric O-H stretching vibration of intermediate water molecules decreased. It was found that the protein native state component ratios of α-helix and β-sheet increased with increasing symmetric O-H stretching vibration between intermediate water molecules, and they decreased with decreasing asymmetric O-H stretching vibration between free water molecules. Moreover, the cytotoxicity against osteoblasts (MC3T3-E1) was evaluated and the hybrid particles exhibited a high cell density, indicating their bioactivity. On the hybrid particles interacting with P123, the cells were three-dimensionally assembled and uniaxially grown with the culture. Therefore, this is the first successful report of the synthesis of nanostructured MS/HA hybrid particles interacting with P123, and the controlled hydration layer structures on the particle surfaces were found to contribute to the protein secondary structures, promoting cytocompatibility.

Evaluation of Antibacterial Activity of Zinc-Doped Hydroxyapatite Colloids and Dispersion Stability Using Ultrasounds

This study proves that the new developed zinc-doped hydroxyapatite (ZnHAp) colloids by an adapted sol-gel method can be widely used in the pharmaceutical, medical, and environmental industries. ZnHAp nanoparticles were stabilized in an aqueous solution, and their colloidal dispersions have been characterized by different techniques. Scanning Electron Microscopy (SEM) was used to get information on the morphology and composition of the investigated samples. Energy-dispersive X-ray spectroscopy (EDX) analysis confirmed the elemental compositions of ZnHAp colloidal dispersions. The homogeneous and uniform distribution of constituent elements (zinc, calcium, phosphorus, oxygen) was highlighted by the obtained elemental mapping results. The X-ray diffraction (XRD) results of the obtained samples showed a single phase corresponding to the hexagonal hydroxyapatite. The characteristic bands of the hydroxyapatite structure were also evidenced by Fourier-transform infrared spectroscopy (FTIR) analysis. For a stability assessment of the colloidal system, ζ-potential for the ZnHAp dispersions was estimated. Dynamic light scattering (DLS) was used to determine particles dispersion and hydrodynamic diameter (DHYD). The goal of this study was to provide for the first time information on the stability of ZnHAp particles in solutions evaluated by non-destructive ultrasound-based technique. In this work, the influence of the ZnHAp colloidal solutions stability on the development of bacteria, such as Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), was also established for the first time. The antimicrobial activity of ZnHAp solutions was strongly influenced by both the stability of the solutions and the amount of Zn.

Physicochemical evaluation and in vitro hemocompatibility study on nanoporous hydroxyapatite

Hydroxyapatite is an ideal biomaterial for bone tissue engineering due to its biocompatibility and hemocompatibility which have been widely studied by many researchers. The incorporation of nanoporosity into hydroxyapatite could transform the biomaterial into an effective adsorbent for uremic toxins removal especially in artificial kidney system. However, the effect of nanoporosity incorporation on the hemocompatibility of hydroxyapatite has yet to be answered. In this study, nanoporous hydroxyapatite was synthesized using hydrothermal technique and its hemocompatibility was determined. Non-ionic surfactants were used as soft templates to create porosity in the hydroxyapatite. The presence of pure hydroxyapatite phase in the synthesized samples is validated by X-ray diffraction analysis and Fourier transform infrared spectroscopy. The TEM images show that the hydroxyapatite formed rod-like particles with the length of 21-90 nm and diameter of 11-70 nm. The hydroxyapatite samples exhibit BET surface area of 33-45 m² g^-1 and pore volume of 0.35-0.44 cm³ g^-1. The hemocompatibility of the hydroxyapatite was determined via hemolysis test, platelet adhesion, platelet activation and blood clotting time measurement. The nanoporous hydroxyapatite shows less than 5% hemolysis, suggesting that the sample is highly hemocompatible. There is no activation and morphological change observed on the platelets adhered onto the hydroxyapatite. The blood clotting time demonstrates that the blood incubated with the hydroxyapatite did not coagulate. This study summarizes that the synthesized nanoporous hydroxyapatite is a highly hemocompatible biomaterial and could potentially be utilized in biomedical applications.

Scalable novel PVDF based nanocomposite foam for direct blood contact and cardiac patch applications

Scalable novel beta phase polyvinylidene fluoride-poly(methyl methacrylate) (PVDF-PMMA) polymer blend based nanocomposite foam with hydroxyapatite (HAp) and titanium dioxide (TiO₂) as nanofillers (β-PVDF-PMMA/HAp/TiO₂) (β-PPHT-f), was prepared by using salt etching assisted solution casting method. The prepared β-PPHT-f nanocomposite material was characterized using XRD, FT-IR, SEM-EDS. The XRD and FTIR results confirmed the formation of β phase of β-PPHT-f. The SEM and EDS results confirmed the formation of high porous structured closed cell type morphology of β-PPHT-f. It also, confirmed the uniform distribution of Ti, Ca, P, N and O, in β-PPHT-f. Contact angle measurements performed using sessile drop method with water and EDTA treated blood (EDTA blood) as probe liquids revealed that β-PPHT-f is hydrophilic with contact angle of 48.2° as well as hemophilic with contact angle of 13.7°. Porosity, fluid absorption and retention investigation by gravimetric analysis revealed that β-PPHT-f was 89.2% porous and can absorb and retain 139.15% and 87.05% of water and blood, respectively. The hemolysis assay performed as per ASTM F756 procedure revealed that β-PPHT-f is non hemolytic. Also, the Leishman stained blood smears prepared from whole blood incubated with β-PPHT-f for 3, 4, 5 and 6 h at 37 °C revealed that the blood cells were not affected by β-PPHT-f, its surface morphology and elemental composition. H9c2 cell line studies on a transparent film prepared using β-PPHT-f revealed that the elemental composition of the nanocomposite favored H9c2 cell adhesion and differentiation. All the characterization results indicate that the newly developed scalable novel β-PPHT-f is hemocompatible and cardiomyocyte compatible, suggesting it as a useful material for direct blood contact and cardiac patch applications.

Vascular biosafety of commercial hydroxyapatite particles: discrepancy between blood compatibility assays and endothelial cell behavior

BACKGROUND

Vascular homeostasis is ensured by a dynamic interplay involving the endothelium, the platelets and the coagulation system. Thus, the vascular safety of particulate materials must address this integrated system, an approach that has been largely neglected. This work analysed the effects of commercial hydroxyapatite (HA) particles in blood compatibility and in endothelial cell behavior, due to their clinical relevance and scarcity of data on their vascular biosafety.

RESULTS

Particles with similar chemical composition and distinct size and morphology were tested, i.e. rod-like, nano dimensions and low aspect ratio (HAp1) and needle-shape with wider size and aspect ratio (HAp2). HAp1 and HAp2, at 1 to 10 mg/mL, did not affect haemolysis, platelet adhesion, aggregation and activation, or the coagulation system (intrinsic and extrinsic pathways), although HAp2 exhibited a slight thrombogenic potential at 10 mg/mL. Notwithstanding, significantly lower levels presented dose-dependent toxicity on endothelial cells' behavior. HAp1 and HAp2 decreased cell viability at levels ≥ 250 and ≥ 50 μg/mL, respectively. At 10 and 50 μg/mL, HAp1 did not interfere with the F-actin cytoskeleton, apoptotic index, cell cycle progression, expression of vWF, VECad and CD31, and the ability to form a network of tubular-like structures. Comparatively, HAp2 caused dose-dependent toxic effects in these parameters in the same concentration range.

CONCLUSION

The most relevant observation is the great discrepancy of HA particles' levels that interfere with the routine blood compatibility assays and the endothelial cell behavior. Further, this difference was also found to be dependent on the particles' size, morphology and aspect ratio, emphasizing the need of a complementary biological characterization, taking into consideration the endothelial cells' functionality, to establish the vascular safety of particulate HA.

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Functional calcium phosphate composites in nanomedicine

Calcium phosphate (CaP) materials have many peculiar and intriguing properties. In nature, CaP is found in nanostructured form embedded in a soft proteic matrix as the main mineral component of bones and teeth. The extraordinary stoichiometric flexibility, the different stabilities exhibited by its different forms as a function of pH and the highly dynamic nature of its surface ions, render CaP one of the most versatile materials for nanomedicine. This review summarizes some of the guidelines so far emerged for the synthesis of CaP composites in aqueous media that endow the material with tailored crystallinity, morphology, size, and functional properties. First, we introduce very briefly the areas of application of CaP within the nanomedicine field. Then through some selected examples, we review some synthetic routes where the presence of functional units (small templating molecules like surfactants, or oligomers and polymers) assists the synthesis and at the same time impart the functionality or the responsiveness desired for the end-application of the material. Finally, we illustrate two examples from our laboratory, where CaP is decorated by biologically active polymers or prepared within a thermo- and magneto-responsive hydrogel, respectively.

Room Temperature Crystallization of Hydroxyapatite in Porous Silicon Structures

Porous silicon (PS) substrates, with different pore sizes and morphology, have been used to crystallize hydroxyapatite (HA) nano-fibers by an easy and economical procedure using a co-precipitation method at room temperature. In situ formation of HA nanoparticles, within the meso- and macroporous silicon structure, resulted in the formation of nanometer-sized hydroxyapatite crystals on/within the porous structure. The X-ray diffraction technique was used to determine the tetragonal structure of the crystals. Analysis/characterization demonstrates that under certain synthesis conditions, growth and crystallization of hydroxyapatite layer on/inside PS can be achieved at room temperature. Such composite structures expand the possibility of designing a new bio-composite material based on the hydroxyapatite and silicon synthesized at room temperature.

Biomimetic synthesis of needle-like fluorescent calcium phosphate/carbon dot hybrid composites for cell labeling and copper ion detection

We report a biomimetic method to synthesize needle-like calcium phosphate (CaP) using carbon dots (CDs) and sodium carboxymethylcellulose as dual templates. The CaP/CDs were capable of cell labeling and selective detection of copper ions in drinking water.

Synthesis of eucalyptus/tea tree oil absorbed biphasic calcium phosphate–PVDF polymer nanocomposite films: a surface active antimicrobial system for biomedical application

A biocompatible poly(vinylidene) difluoride (PVDF) based film has been prepared by in situ precipitation of calcium phosphate precursors.

Nickel doped nanohydroxyapatite: vascular endothelial growth factor inducing biomaterial for bone tissue engineering

Biomaterial induced activation of vascular endothelial growth factor (VEGF) pathway for angiogenesis is now gaining recognition as an effective option for tissue engineering.

Advances in synthesis of calcium phosphate crystals with controlled size and shape

Calcium phosphate (CaP) materials have a wide range of applications, including biomaterials, adsorbents, chemical engineering materials, catalysts and catalyst supports and mechanical reinforcements. The size and shape of CaP crystals and aggregates play critical roles in their applications. The main inorganic building blocks of human bones and teeth are nanocrystalline CaPs; recently, much progress has been made in the application of CaP nanocrystals and their composites for clinical repair of damaged bone and tooth. For example, CaPs with special micro- and nanostructures can better imitate the biomimetic features of human bone and tooth, and this offers significantly enhanced biological performances. Therefore, the design of CaP nano-/microcrystals, and the shape and hierarchical structures of CaPs, have great potential to revolutionize the field of hard tissue engineering, starting from bone/tooth repair and augmentation to controlled drug delivery devices. Previously, a number of reviews have reported the synthesis and properties of CaP materials, especially for hydroxyapatite (HAp). However, most of them mainly focused on the characterizations and physicochemical and biological properties of HAp particles. There are few reviews about the control of particle size and size distribution of CaPs, and in particular the control of nano-/microstructures on bulk CaP ceramic surfaces, which is a big challenge technically and may have great potential in tissue engineering applications. This review summarizes the current state of the art for the synthesis of CaP crystals with controlled sizes from the nano- to the macroscale, and the diverse shapes including the zero-dimensional shapes of particles and spheres, the one-dimensional shapes of rods, fibers, wires and whiskers, the two-dimensional shapes of sheets, disks, plates, belts, ribbons and flakes and the three-dimensional (3-D) shapes of porous, hollow, and biomimetic structures similar to biological bone and tooth. In addition, this review will also summarize studies on the controlled formation of nano-/microstructures on the surface of bulk ceramics, and the preparation of macroscopical bone grafts with 3-D architecture nano-/microstructured surfaces. Moreover, the possible directions of future research and development in this field, such as the detailed mechanisms behind the size and shape control in various strategies, the importance of theoretical simulation, self-assembly, biomineralization and sacrificial precursor strategies in the fabrication of biomimetic bone-like and enamel-like CaP materials are proposed.

Suspension thermal spraying of hydroxyapatite: microstructure and in vitro behaviour

In cementless fixation of metallic prostheses, bony ingrowth onto the implant surface is often promoted by osteoconductive plasma-sprayed hydroxyapatite coatings. The present work explores the use of the innovative High Velocity Suspension Flame Spraying (HVSFS) process to coat Ti substrates with thin homogeneous hydroxyapatite coatings. The HVSFS hydroxyapatite coatings studied were dense, 27-37μm thick, with some transverse microcracks. Lamellae were sintered together and nearly unidentifiable, unlike conventional plasma-sprayed hydroxyapatite. Crystallinities of 10%-70% were obtained, depending on the deposition parameters and the use of a TiO2 bond coat. The average hardness of layers with low (<24%) and high (70%) crystallinity was ≈3.5GPa and ≈4.5GPa respectively. The distributions of hardness values, all characterised by Weibull modulus in the 5-7 range, were narrower than that of conventional plasma-sprayed hydroxyapatite, with a Weibull modulus of ≈3.3. During soaking in simulated body fluid, glassy coatings were progressively resorbed and replaced by a new, precipitated hydroxyapatite layer, whereas coatings with 70% crystallinity were stable up to 14days of immersion. The interpretation of the precipitation behaviour was also assisted by surface charge assessments, performed through Z-potential measurements. During in vitro tests, HA coatings showed no cytotoxicity towards the SAOS-2 osteoblast cell line, and surface cell proliferation was comparable with proliferation on reference polystyrene culture plates.

Hydroxyapatite nanoparticles as vectors for gene delivery

The long-recognized promise of gene therapy to treat a broad range of currently incurable diseases remains largely unfulfilled, hindered by lack of a safe and efficient delivery vehicle. Hydroxyapatite nanoparticles are deemed a feasible candidate and possess many characteristics desired of an ideal gene vector. Current fabrication techniques can readily synthesize hydroxyapatite particles in the nanometer range; however, these particles suffer from extensive aggregation and heterogeneity, mainly in size, shape and surface charge, which render them inappropriate for gene-therapy application. There is thus a pertinent need to develop a method capable of fabricating homogenous and monodispersed hydroxyapatite nanoparticles in a rapid, efficient and cost-effective manner that can be easily upscaled. Cell transfection is impeded by several physical and biological barriers, with the vector's properties highly determinant of its ability to overcome these barriers. Fine-tuning hydroxyapatite nanoparticles' morphological and physicochemical properties, achievable through precise regulation of the reaction environment, can enhance transfection efficiencies of particles, in turn, generating safe and effective gene vectors.

Facile synthesis of hydroxyapatite nanoparticles, nanowires and hollow nano-structured microspheres using similar structured hard-precursors

A facile strategy was developed to delicately control the morphologies of hydroxyapatite materials from simple 0D morphologies to complicated 3D architectures using hard-precursors with similar structures. The present study provides a new platform for hydroxyapatite materials to be efficiently synthesized and manipulated.

Block-copolymer-assisted synthesis of hydroxyapatite nanoparticles with high surface area and uniform size

We report the synthesis of hydroxyapatite nanoparticles (HANPs) by the coprecipitation method using calcium D-gluconate and potassium hydrogen phosphate as the sources of calcium and phosphate ions, respectively, and the triblock copolymer F127 as a stabilizer. The HANPs were characterized using scanning electron microscopy, x-ray diffraction, and nitrogen adsorption/desorption isotherms. Removal of F127 by solvent extraction or calcination alters the structure of HANPs. The solvent-extracted HANPs were single crystals with their 〈001〉 axis oriented along the rod axis of the HANP, whereas the calcined HANPs contained two crystal phases that resulted in a spherical morphology. The calcined HANPs had much higher surface area (127 m² g^-1) than the solvent-extracted HANPs (44 m² g^-1).