Solvent Minimized Synthesis of Amides by Reactive Extrusion

Herein, we report on the translation of a small scale ball-milled amidation protocol into a large scale continuous reactive extrusion process. Critical components to the successful translation were: a) understanding how the different operating parameters of a twin-screw extruder should be harnessed to control prolonged continuous operation, and b) consideration of the physical form of the input materials. The amidation reaction is applied to 36 amides spanning a variety of physical form combinations (liquid-liquid, solid-liquid and solid-solid). Following this learning process, we have developed an understanding for the translation of each physical form combination and demonstrated a 7-hour reactive extrusion process for the synthesis of an amide on 500 gram scale (1.3 mols of product).

Low-temperature synthesis of cation-ordered bulk Zn3WN4 semiconductor via heterovalent solid-state metathesis

Metathesis reactions are widely used in synthetic chemistry. While state-of-the-art organic metathesis involves highly controlled processes where specific bonds are broken and formed, inorganic metathesis reactions are often extremely exothermic and, consequently, poorly controlled. Ternary nitrides offer a technologically relevant platform for expanding synthetic control of inorganic metathesis reactions. Here, we show that energy-controlled metathesis reactions involving a heterovalent exchange are possible in inorganic nitrides. We synthesized Zn3WN4 by swapping Zn2+ and Li+ between Li6WN4 and ZnX2 (X = Br, Cl, F) precursors. The in situ synchrotron powder X-ray diffraction and differential scanning calorimetry show that the reaction onset is correlated with the ZnX2 melting point and that product purity is inversely correlated with the reaction's exothermicity. Therefore, careful choice of the halide counterion (i.e., ZnBr2) allows the synthesis to proceed in a swift but controlled manner at a surprisingly low temperature for an inorganic nitride (300 °C). High resolution synchrotron powder X-ray diffraction and diffuse reflectance spectroscopy confirm the synthesis of a cation-ordered Zn3WN4 semiconducting material. We hypothesize that this synthesis strategy is generalizable because many Li-M-N phases are known (where M is a metal) and could therefore serve as precursors for metathesis reactions targeting new ternary nitrides. This work expands the synthetic control of inorganic metathesis reactions in a way that will accelerate the discovery of novel functional ternary nitrides and other currently inaccessible materials.

Isothermal Phase Transitions in Liquid Crystals Driven by Dynamic Covalent Chemistry

The dynamic nature of calamitic liquid crystals is exploited to perform isothermal phase transitions driven by dynamic covalent chemistry. For this purpose, nematic (N) arrays based on aldehyde 1 were treated with different amines (A-E) in an on-surface process, which resulted in different isothermal phase transitions. These phase transformations were caused by in situ imination reactions and are dependent on the nature of the added amine. Transitions from the N to crystal (1A, 1E), isotropic (1B), and smectic (Sm) (1C, 1D) phases were achieved, while the resulting materials feature thermotropic liquid crystal behavior. A sequential transformation from the N 1 to the Sm 1C and then to the N 1B was achieved by coupling an imination to a transimination processes and adjusting the temperature. All of these processes were well characterized by microscopic, spectroscopic, and X-ray techniques, unlocking not only the constitutional but also the structural aspects of the phase transitions. This work provides new insights into designing constitutionally and structurally adaptable liquid crystal systems, paving the way toward the conception of programable evolutive pathways and adaptive materials.

Liquid reagents are not enough for liquid assisted grinding in the synthesis of [(AgBr)(n-pica)]n

This study investigates the mechanochemical reactions between AgBr 3-picolylamine and 4-picolylamine. The use of different stoichiometry ratios of the reagents allows [(AgBr)(n-pica)]n and [(AgBr)2(n-pica)]n to be obtained, and we report the new structures of [(AgBr)2(3-pica)]n and [(AgBr)2(4-pica)]n which are characterized by the presence of the following: (a) infinite inorganic chains, (b) silver atom coordinated only by bromide atoms and (c) argentophilic interactions. Furthermore, we studied the interconversion of [(AgBr)(n-pica)]n/[(AgBr)2(n-pica)]n by mechanochemical and thermal properties. The in situ experiments suggest that [(AgBr)(3-pica)]n is kinetically favoured while [(AgBr)2(3-pica)]n is converted into [(AgBr)(3-pica)]n only with a high excess of the ligand. Finally, the liquid nature of the ligands is not sufficient to assist the grinding process, and the complete reaction is observed with the addition of a small quantity of acetonitrile.

Mechanochemical Scholl Reaction on Phenylated Cyclopentadiene Core: One-Step Synthesis of Fluoreno[5]helicenes

In this study, we explore feasibility of the mechanochemical approach in the synthesis of tetrabenzofluorenes (fluoreno[5]helicenes). For this, commercially available phenylated cyclopentadiene precursors are subjected to the Scholl reaction in the solid state using FeCl3 as an oxidant and sodium chloride as the solid reaction medium. This ball milling process gave access to the 5-membered ring containing-helicenes in one synthetic step in high (95-96 %) isolated yields. The solution-phase reactions, however, were found to be moderate to low yielding in this regard (10-40 %).

Direct thermodynamic characterization of solid-state reactions by isothermal calorimetry

Despite the growing importance of solid-state reactions, their thermodynamic characterization has largely remained unexplored. This is in part due to the lack of methodology for measuring the heat effects related to reactions between solid reactants. We address here this gap and report on the first direct thermodynamic study of chemical reactions between solid reactants by isothermal calorimetry. Three reaction classes, cationic host-guest complex formation, molecular co-crystallization, and Baeyer-Villiger oxidation were investigated, showcasing the versatility of the devised methodology to provide detailed insight into the enthalpy changes related to various reactions. The reliability of the method was confirmed by correlation with the values obtained via solution calorimetry using Hess's law. The thermodynamic characterization of solid-state reactions described here will enable a deeper understanding of the factors governing solid-state processes.

The Origin of Delayed Polymorphism in Molecular Crystals Under Mechanochemical Conditions

We show that mechanochemically driven polymorphic transformations can require extremely long induction periods, which can be tuned from hours to days by changing ball milling energy. The robust design and interpretation of ball milling experiments must account for this unexpected kinetics that arises from energetic phenomena unique to the solid state. Detailed thermal analysis, combined with DFT simulations, indicates that these marked induction periods are associated with processes of mechanical activation. Correspondingly, we show that the pre-activation of reagents can also lead to marked changes in the length of induction periods. Our findings demonstrate a new dimension for exerting control over polymorphic transformations in organic crystals. We expect mechanical activation to have a much broader implication across organic solid-state mechanochemistry.

Dual reactivity based dynamic covalent chemistry: mechanisms and applications

Dynamic covalent chemistry (DCC) focuses on the reversible formation, breakage, and exchange of covalent bonds and assemblies, setting a bridge between irreversible organic synthesis and supramolecular chemistry and finding wide utility. In order to enhance structural and functional diversity and complexity, different types of dynamic covalent reactions (DCRs) are placed in one vessel, encompassing orthogonal DCC without crosstalk and communicating DCC with a shared reactive functional group. As a means of adding tautomers, widespread in chemistry, to interconnected DCRs and combining the features of orthogonal and communicating DCRs, a concept of dual reactivity based DCC and underlying structural and mechanistic insights are summarized. The manipulation of the distinct reactivity of structurally diverse ring-chain tautomers allows selective activation and switching of reaction pathways and corresponding DCRs (C-N, C-O, and C-S) and assemblies. The coupling with photoswitches further enables light-mediated formation and scission of multiple types of reversible covalent bonds. To showcase the capability of dual reactivity based DCC, the versatile applications in dynamic polymers and luminescent materials are presented, paving the way for future functionalization studies.

Mechanochemical Synthesis of Corannulene: Scalable and Efficient Preparation of A Curved Polycyclic Aromatic Hydrocarbon under Ball Milling Conditions

Corannulene, a curved polycyclic aromatic hydrocarbon, is prepared in a multigram scale through mechanochemical synthesis. Initially, a mixer mill approach is examined and found to be suitable for a gram scale synthesis. For larger scales, planetary mills are used. For instance, 15 g of corannulene could be obtained in a single milling cycle with an isolated yield of 90 %. The yields are lower when the jar rotation rate is lower or higher than 400 revolutions per minute (rpm). Cumulatively, 98 g of corannulene is produced through the ball milling-based grinding techniques. These results indicate the future potential of mechanochemistry in the rational chemical synthesis of highly curved nanocarbons such as fullerenes and carbon nanotubes.

Biasing Divergent Polycyclic Aromatic Hydrocarbon Oxidation Pathway by Solvent-Free Mechanochemistry

Precise control in reaction selectivity is the goal in modern organic synthesis, and it has been widely studied throughout the synthetic community. In comparison, control of divergent reactivity of a given reagent under different reaction conditions is relatively less explored aspect of chemical selectivity. We herein report an unusual reaction between polycyclic aromatic hydrocarbons and periodic acid H₅IO₆ (1), where the product outcome is dictated by the choice of reaction conditions. That is, reactions under solution-based condition give preferentially C-H iodination products, while reactions under solvent-free mechanochemical condition provide C-H oxidation quinone products. Control experiments further indicated that the iodination product is not a reaction intermediate toward the oxidation product and vice versa. Mechanistic studies unveiled an in situ crystalline-to-crystalline phase change in 2 during ball-milling treatment, where we assigned it as a polymeric hydrogen-bond network of 1. We believe that this polymeric crystalline phase shields the more embedded electrophilic I═O group of 1 from C-H iodination and bias a divergent C-H oxidation pathway (with I═O) in the solid state. Collectively, this work demonstrates that mechanochemistry can be employed to completely switch a reaction pathway and unmask hidden reactivity of chemical reagents.

Spiers Memorial Lecture: Mechanochemistry, tribochemistry, mechanical alloying - retrospect, achievements and challenges

The paper presents a view on the achievements, challenges and prospects of mechanochemistry. The extensive reference list can serve as a good entry point to a plethora of mechanochemical literature.

Controlling polymorphism in molecular cocrystals by variable temperature ball milling

Mechanochemistry offers a unique opportunity to modify and manipulate crystal forms, often providing new products as compared with conventional solution methods. While promising, there is little known about how to control the solid form through mechanochemical means, demanding dedicated investigations. Using a model organic cocrystal system (isonicotinamide:glutaric acid), we here demonstrate that with mechanochemistry, polymorphism can be induced in molecular solids under conditions seemingly different to their conventional thermodynamic (thermal) transition point. Whereas Form II converts to Form I upon heating to 363 K, the same transition can be initiated under ball milling conditions at markedly lower temperatures (348 K). Our results indicate that mechanochemical techniques can help to reduce the energy barriers to solid form transitions, offering new insights into controlling polymorphic forms. Moreover, our results suggest that the nature of mechanochemical transformations could make it difficult to interpret mechanochemical solid form landscapes using conventional equilibrium-based tools.

An Environmental-Inert and Highly Self-Healable Elastomer Obtained via Double-Terminal Aromatic Disulfide Design and Zwitterionic Crosslinked Network for Use as a Triboelectric Nanogenerator

Due to the ongoing development of portable/mobile electronics, sources to power have received widespread attention. Compared to chemical batteries as power sources, triboelectric nanogenerators (TENGs) possess lots of advantages, including the ability to harvest energy via human motions, flexible structures, environment-friendliness, and long-life characteristics. Although many self-healable TENGs are reported, the achievement of a muscle-like elasticity and the ability to recover from inevitable damage under extreme conditions (such as a high/low temperature and/or humidity) remain a challenge. Herein, a "double-terminal aromatic disulfide" on a structure with zwitterions as branched chains is reported to engineer the high-efficient self-healable elastomer for application in a flexible TENG. The as-designed material exhibits a repeatable elastic recovery (at 250% elongation) and a self-healing efficiency with an ultimate tensile stress of 96% over 2 h, representing an improvement on previously reported disulfide-based elastomers. The elastomer can autonomously recover by 50% even at a subzero temperature of -30 °C within 24 h. The elastomer-based TENG, as a self-driven sensor for detecting human behavior, is demonstrated to exhibit stable outputs and self-healing in the temperature range of -30 to 60 °C, and so is expected to promote the development of self-powered electronics for next-generation human-machine communications.

Mechanochemistry: New Tools to Navigate the Uncharted Territory of "Impossible" Reactions

Mechanochemical transformations have made chemists enter unknown territories, forcing a different chemistry perspective. While questioning or revisiting familiar concepts belonging to solution chemistry, mechanochemistry has broken new ground, especially in the panorama of organic synthesis. Not only does it foster new "thinking outside the box", but it also has opened new reaction paths, allowing to overcome the weaknesses of traditional chemistry exactly where the use of well-established solution-based methodologies rules out progress. In this Review, the reader is introduced to an intriguing research subject not yet fully explored and waiting for improved understanding. Indeed, the study is mainly focused on organic transformations that, although impossible in solution, become possible under mechanochemical processing conditions, simultaneously entailing innovation and expanding the chemical space.

Mechanochemical Enhancement of the Structural Stability of Pseudorotaxane Intermediates in the Synthesis of Rotaxanes

Mechanochemical syntheses of rotaxanes have attracted considerable attention of late because of the superior reaction rates and higher yields associated with their production compared with analogous reactions carried out in solution. Previous investigators, however, have focused on the demonstration of the mechanochemical syntheses of rotaxanes per se, rather than on studying the solid-phase host-guest molecular interplay related to their rapid formation and high yields. In this investigation, we attribute the lower yields of rotaxanes prepared in solution to the limited concentration and a desolvation energy penalty that must be compensated for by host-guest interactions during complexation that precedes the templation leading to rotaxane formation. It follows that, if the desolvation energy can be removed and higher concentrations can be attained, even weak host-guest interactions can drive the complexation of host and guest molecules efficiently. In order to test this hypothesis, we chose two host-guest pairs of permethylated pillar[5]arene/1,6-diaminohexane and permethylated pillar[5]arene/2,2'-(ethylenedioxy)bis(ethylamine) for the simple reason that they exhibit extremely low binding constants (2.7 ± 0.4 M^-1 when 1,6-diaminohexane is the guest and <0.1 M^-1 when 2,2'-(ethylenedioxy)bis(ethylamine) is the guest in CDCl₃; i.e., ostensibly no pseudorotaxane formation is observed). We argue that the amount of pseudorotaxanes formed in the solid state is responsive to mechanical treatments or otherwise and changes in temperature during stoppering reactions. Compared to the amount of pseudorotaxanes that can be obtained in solution, large quantities of pseudorotaxanes are formed in the solid state because of concentration and desolvation effects. This mechanochemical enhancement of pseudorotaxane formation is referred to as a self-correction in the current investigation. Rotaxanes based on permethylated pillar[5]arene/1,6-diaminohexane and permethylated pillar[5]arene/2,2'-(ethylenedioxy)bis(ethylamine) have been synthesized in much higher yields compared to those obtained in solution, aided and abetted by self-correction effects during mechanical treatments and heating at a mild temperature of 50 °C.

Sulfur in Dynamic Covalent Chemistry

Sulfur has been important in dynamic covalent chemistry (DCC) since the beginning of the field. Mainly as part of disulfides and thioesters, dynamic sulfur-based bonds (DSBs) have a leading role in several remarkable reactions. Part of this success is due to the almost ideal properties of DSBs for the preparation of dynamic covalent systems, including high reactivity and good reversibility under mild aqueous conditions, the possibility of exploiting supramolecular interactions, access to isolable structures, and easy experimental control to turn the reaction on/off. DCC is currently witnessing an increase in the importance of DSBs. The chemical flexibility offered by DSBs opens the door to multiple applications. This Review presents an overview of all the DSBs used in DCC, their applications, and remarks on the interesting properties that they confer on dynamic chemical systems, especially those containing several DSBs.

Mechanochemical Access to a Short-Lived Cyclic Dimer Pd2 L2 : An Elusive Kinetic Species En Route to Molecular Triangle Pd3 L3 and Molecular Square Pd4 L4

Pd-based molecular square Pd₄ L₄ and triangle Pd₃ L₃ represent the molecular ancestors of metal-coordination polyhedra that have been an integral part of the field for the last 30 years. Conventional solution-based reactions between cis-protected Pd ions and 2,2'-bipyridine exclusively give Pd₄ L₄ and/or Pd₃ L₃ as the sole products. We herein show that, under solvent-free mechanochemical conditions, the self-assembly energy landscape can be thermodynamically manipulated to form an elusive cyclic dimer Pd₂ L₂ for the first time. In the absence of solvent, Pd₂ L₂ is indefinitely stable in the solid-state, but converts rapidly to its thermodynamic products Pd₃ L₃ and Pd₄ L₄ in solution, confirming Pd₂ L₂ as a short-lived kinetic species in the solution-based self-assembly process. Our results highlight how mechanochemistry grants access to a vastly different chemical space than available under conventional solution conditions. This provides a unique opportunity to isolate elusive species in self-assembly processes that are too reactive to both "see" and "capture".

Manipulating Reaction Energy Coordinate Landscape of Mechanochemical Diaza-Cope Rearrangement

Chiral vicinal diamines, a unique class of optically-active building blocks, play a crucial role in material design, pharmaceutical, and catalysis. Traditionally, their syntheses are all solvent-based approaches, which make organic solvent an indispensable part of their production. As part of our program aiming to develop chemical processes with reduced carbon footprints, we recently reported a highly practical and environmentally-friendly synthetic route to chiral vicinal diamines by solvent-free mechanochemical diaza-Cope rearrangement. We herein showed that a new protocol by co-milling with common laboratory solid additives, such as silica gel, can significantly enhance the efficiency of the reaction, compared to reactions in the absence of additives. One possible explanation is the Lewis acidic nature of additives that accelerates a key Schiff base formation step. Reaction monitoring experiments tracing all the reaction species, including reactants, intermediates, and product, suggested that the reaction profile is distinctly different from ball-milling reactions without additives. Collectively, this work demonstrated that additive effect is a powerful tool to manipulate a reaction pathway in mechanochemical diazo-Cope rearrangement pathway, and this is expected to find broad interest in organic synthesis using mechanical force as an energy input.

Using Solid Catalysts in Disulfide-Based Dynamic Combinatorial Solution- and Mechanochemistry

It was shown for the first time that solid amines can act as catalysts for disulfide-based dynamic combinatorial chemistry (DCC) by ball mill grinding. The mechanochemical equilibrium for the two disulfide reactions studied was reached within 1-3 h using ten different amine catalysts. This contrasts with the weeks to months to achieve solution equilibrium for most solid amine catalysts at 2 %mol mol^-1 concentration in a 2 mMolar disulfide dynamic combinatorial library in a suitable solvent. The final mechanochemical equilibrium was independent of the catalyst used but varied with other ball mill grinding factors such as the presence of traces of solvent. The different efficiencies of the amines tested were discussed.

Insight into the Reactivity Profile of Solid-State Aryl Bromides in Suzuki-Miyaura Cross-Coupling Reactions Using Ball Milling

Despite recent advances in solid-state organic synthesis using ball milling, insight into the unique reactivity of solid-state substrates, which is often different from that in solution, has been poorly explored. In this study, we investigated the relationship between the reactivity and melting points of aryl halides in solid-state Suzuki-Miyaura cross-coupling reactions and the effect of reaction temperature on these processes. We found that aryl halides with high melting points showed significantly low reactivity in the solid-state cross-coupling near room temperature, but the reactions were notably accelerated by increasing the reaction temperature. Given that the reaction temperature is much lower than the melting points of these substrates, the acceleration effect is most likely ascribed to the weakening of the intermolecular interactions between the substrate molecules in the solid-state. The present study provides important perspectives for the rational design of efficient solid-state organic transformations using ball milling.

Quantitative reversible one pot interconversion of three crystalline polymorphs by ball mill grinding

We demonstrate here using a disulfide system the first example of reversible, selective, and quantitative transformation between three crystalline polymorphs by ball mill grinding.

Disulfide metathesis via sulfur⋯iodine interaction and photoswitchability

The idea of constitutional dynamic chemistry (CDC) and dynamic combinatorial chemistry (DCC) is widespread in the literature using the chemistry of disulfides. The synthesis of unsymmetrical diaryl disulfides is challenging due to the presence of a weak S-S bond. We report herein the synthesis of unsymmetrical diaryl disulfides from two symmetrical disulfides via a cross-metathesis reaction which was controlled by a weak sulfur⋯iodine (S⋯I) interaction. The unsymmetrical disulfides were stable in acetonitrile solution in the presence of N-iodosuccinimide (NIS), and found to be reversibly photoswitchable to the symmetrical disulfides under visible light irradiation.

A Case Study on the Desired Selectivity in Solid-State Mechano- and Slow-Chemistry, Melt, and Solution Methodologies

Solution-based syntheses are omnipresent in chemistry but are often associated with obvious disadvantages, and the search for new mild and green synthetic methods continues to be a hot topic. Here, comparative studies in four different reaction media were conducted, that is, the solid-state mechano- and slow-chemistry synthesis, melted phase, and solution protocols, and the impact of the employed solvent-free solid-state versus liquid-phase synthetic approaches was highlighted on a pool of products. A moderately exothermic model reaction system was chosen based on bis(pentafluorophenyl)zinc, (C₆ F₅ )₂ Zn, and 2,2,6,6-tetramethylpiperidinyl oxide (TEMPO) as a stable nitroxyl radical, anticipating that these reagents may offer a unique landscape for addressing kinetic and thermodynamic aspects of wet and solvent-free solid-state processes. In a toluene solution two distinct paramagnetic Lewis acid-base adducts (C₆ F₅ )₂ Zn(η¹ -TEMPO) (1) and (C₆ F₅ )₂ Zn(η¹ -TEMPO)₂ (2) equilibrated, but only 2 was affordable by crystallization. In turn, crystallization from the melt was the only method yielding single crystals of 1. Moreover, the solid-state approaches were stoichiometry sensitive and allowed for the selective synthesis of both adducts by simple stoichiometric control over the substrates. Density functional theory (DFT) calculations were carried out to examine selected structural and thermodynamic features of the adducts 1 and 2. Compound 2 is a unique non-redox active metal complex supported by two nitroxide radicals, and the magnetic studies revealed weak-to-moderate intramolecular antiferromagnetic interactions between the two coordinated TEMPO molecules.

Mechanochemical transformation of planar polyarenes to curved fused-ring systems

The transformation of planar aromatic molecules into π-extended non-planar structures is a challenging task and has not been realized by mechanochemistry before. Here we report that mechanochemical forces can successfully transform a planar polyarene into a curved geometry by creating new C-C bonds along the rim of the molecular structure. In doing so, mechanochemistry does not require inert conditions or organic solvents and provide better yields within shorter reaction times. This is illustrated in a 20-minute synthesis of corannulene, a fragment of fullerene C60, in 66% yield through ball milling of planar tetrabromomethylfluoranthene precursor under ambient conditions. Traditional solution and gas-phase synthetic pathways do not compete with the practicality and efficiency offered by the mechanochemical synthesis, which now opens up a new reaction space for inducing curvature at a molecular level.

Kinetical Study, Thermo-Mechanical Characteristics and Recyclability of Epoxidized Camelina Oil Cured with Antagonist Structure (Aliphatic/Aromatic) or Functionality (Acid/Amine) Hardeners

In an attempt to prepare sustainable epoxy thermosets, this study introduces for the first time the idea to use antagonist structures (aromatic/aliphatic) or functionalities (acid/amine) as hardeners to produce reprocessable resins based on epoxidized camelina oil (ECMO). Two kinds of mixtures were tested: one combines aromatic/aliphatic dicarboxylic acids: 2,2'-dithiodibenzoic acid (DTBA) and 3,3'-dithiodipropionic acid (DTDA); another is the combination of two aromatic structures with acid/amine functionality: DTBA and 4-aminophenyl disulfide (4-AFD). DSC and FT-IR analyses were used as methods to analyze the curing reaction of ECMO with the hardeners. It was found that the thermosets obtained with the dual crosslinked mechanism needed reduced curing temperatures and reprocessing protocols compared to the individual crosslinked thermosets. Thanks to the contribution of disulfide bonds in the network topology, the obtained thermosets showed recycling ability. The final thermomechanical properties of the virgin and mechanical reprocessed materials were analyzed by DMA and TGA. The obtained thermosets range from elastomeric to rigid materials. As an example, the ECMO/DTBA704-AFD30 virgin or reprocessed thermosets have tan δ values reaching 82-83 °C. The study also investigates the chemical recycling and the solvent resistance of these vitrimer-like materials.

High-pressure Nucleation of Low-Density Polymorphs*

New polymorphs β and γ of bis-3-nitrophenyl disulphide, crystallized above 0.3 GPa, are less dense than the ambient-pressure polymorph α. This counterintuitive density relation results from the high-entropy nucleation and subsequent kinetic crystallization. The work performed by pressure compensates the high entropy and temperature product, substantiated in varied conformers and increased chemical potential. Pressure-increased viscosity promotes the kinetic polymorphs, in accordance with empirical Ostwald's rule of stages. It contrasts to mechanochemical techniques, favouring high-density polymorphs.

Photo-responsive host-guest complexation directs dynamic covalent condensation of phenyl boronic acid and d-fructose

Inspired by the way templates have been used to drive dynamic combinatorial libraries by molecular recognition, we exploited the photo-responsive host-guest interaction of an azo-based photoswitch with permethylated cyclodextrin to reversibly manipulate the dynamic covalent interaction of a phenyl boronic acid and d-fructose by irradiation with light.

Non-symmetric mechanophores prepared from radical-type symmetric mechanophores: bespoke mechanofunctional polymers

A non-symmetric radical-type mechanophore (CF/ABF) was synthesized by molecular crossing between two radical-type mechanophores. The thermal stability and mechanoresponsiveness of CF/ABF were found to be tunable by altering the properties of the parent RMs. The CF/ABF-centred polymers showed mixed mechanochromism derived from the simultaneous generation of two radical species.

Dissociate transfer exchange of tandem dynamic bonds endows covalent adaptable networks with fast reprocessability and high performance

A covalent adaptable network combining continuous reprocessability and high performance was achieved via dissociate transfer exchange (DTE) of tandem dynamic bonds.

Hydrogen bond synthons affect the coordination geometry of d10-metal halide complexes: synthetic methods, theoretical studies, and supramolecular architectures

The tendency of the pyrazine nitrogen atom to form hydrogen bond supramolecular synthons affects the coordination geometry of new d10-metal halide complexes which have been prepared by solution-based methods in comparison with solid-state reactions.

Porous Molecular Capsules as Non-Polymeric Transducers of Mechanical Forces to Mechanophores

Mechanical grinding/milling can be regarded as historically the first technology for changing the properties of matter. Mechanically activated molecular units (mechanophores) can be present in various structures: polymers, macromolecules, or small molecules. However, only polymers have been reported to effectively transduce energy to mechanophores, which induces breakage of covalent bonds. In this paper, a second possibility is presented-molecular capsules as stress-sensitive units. Mechanochemical encapsulation of fullerenes in cystine-based covalent capsules indicates that complexation takes place in the solid state, despite the fact that the capsules do not possess large enough entrance portals. By using a set of solvent-free MALDI (sf-MALDI) and solid-state NMR (ss-NMR) experiments, it has been proven that encapsulation proceeds during milling and in this process hydrazones and disulfides get activated for breakage, exchange, and re-forming. The capsules are porous and therefore prone to collapse under solvent-free conditions and their conformational rigidity promotes the collapse by the breaking of covalent bonds.

Towards Controlling the Reactivity of Enzymes in Mechanochemistry: Inert Surfaces Protect β-Glucosidase Activity During Ball Milling

The activity of β-glucosidases-the enzymes responsible for the final step in the enzymatic conversion of cellulose to glucose-can be maintained and manipulated under mechanochemical conditions in the absence of bulk solvent, either through an unexpected stabilization effect of inert surfaces, or by altering the enzymatic equilibrium. The reported results illustrate unique aspects of mechanoenzymatic reactions that are not observable in conventional aqueous solutions. They also represent the first reported strategies to enhance activity and favor either direction of the reaction under mechanochemical conditions.

Unsymmetrical Disulfides Synthesis via Sulfenium Ion

An umpolung approach for the synthesis of unsymmetrical disulfides via sulfenium ion is reported. In situ generated electrophilic sulfenium ion from electron-rich thiols reacted with second thiols to yield unsymmetrical disulfides. Using an iodine catalyst and 4-dimethylaminopyridine (DMAP)/water as promoter, the target syntheses were achieved in one pot under aerobic condition.

Understanding the unexpected effect of frequency on the kinetics of a covalent reaction under ball-milling conditions

We here explore how ball-mill-grinding frequency affects the kinetics of a disulfide exchange reaction. Our kinetic data show that the reaction progress is similar at all the frequencies studied (15-30 Hz), including a significant induction time before the nucleation and growth process starts. This indicates that to start the reaction an initial energy accumulation is necessary. Other than mixing, the energy supplied by the mechanical treatment has two effects: (i) reducing the crystal size and (ii) creating defects in the structure. The crystal-breaking process is likely to be dominant at first becoming less important later in the process when the energy supplied is stored at the molecular level as local crystal defects. This accumulation is taken here to be the rate-determining step. We suggest that the local defects accumulate preferentially at or near the crystal surface. Since the total area increases exponentially when the crystal size is reduced by the crystal-breaking process, this can further explain the exponential dependence of the onset time on the milling frequency.