Electrocatalytic reaction of hydrogen peroxide and NADH based on poly(neutral red) and FAD hybrid film

Dye Decolorization by a Miniaturized Peroxidase Fe-MimochromeVI*a

Oxidases and peroxidases have found application in the field of chlorine-free organic dye degradation in the paper, toothpaste, and detergent industries. Nevertheless, their widespread use is somehow hindered because of their cost, availability, and batch-to-batch reproducibility. Here, we report the catalytic proficiency of a miniaturized synthetic peroxidase, Fe-Mimochrome VI*a, in the decolorization of four organic dyes, as representatives of either the heterocyclic or triarylmethane class of dyes. Fe-Mimochrome VI*a performed over 130 turnovers in less than five minutes in an aqueous buffer at a neutral pH under mild conditions.

Biocompatible MXene (Ti3C2Tx) Immobilized with Flavin Adenine Dinucleotide as an Electrochemical Transducer for Hydrogen Peroxide Detection in Ovarian Cancer Cell Lines

Flavin adenine dinucleotide (FAD) is a coenzyme and acts as a redox cofactor in metabolic process. Owing to such problems as poor electron transfer properties, unfavorable adsorption, and lack of stability on rigid electrodes, the bio-electrochemical applications of FAD have been limited. Herein, a novel fabrication method was developed for the immobilization process using 2D MXene (Ti₃C₂T_x), which enhanced the redox property of FAD and improved the electro-catalytic reduction of hydrogen peroxide (H₂O₂) in neutral medium. The FAD-immobilized Ti₃C₂T_x electrode (FAD/Ti₃C₂T_x) was studied by UV-Visible and Raman spectroscopies, which confirmed the successful adsorption of FAD on the Ti₃C₂T_x surface. The surface morphology and the elemental composition of Ti₃C₂T_x were investigated by high resolution transmission electron microscopy and the energy dispersive X-ray analysis. The redox property of the FAD/Ti₃C₂T_x modified glassy carbon electrode (FAD/Ti₃C₂T_x/GCE) was highly dependent on pH and exhibited a stable redox peak at −0.455 V in neutral medium. Higher amounts of FAD molecules were loaded onto the 2D MXene (Ti₃C₂T_x)-modified electrode, which was two times higher than the values in the reported work, and the surface coverage (ᴦ_FAD) was 0.8 × 10⁻¹⁰ mol/cm². The FAD/Ti₃C₂T_x modified sensor showed the electrocatalytic reduction of H₂O₂ at −0.47 V, which was 130 mV lower than the bare electrode. The FAD/Ti₃C₂T_x/GCE sensor showed a linear detection of H₂O₂ from 5 nM to 2 µM. The optimization of FAD deposition, amount of Ti₃C₂T_x loading, effect of pH and the interference study with common biochemicals such as glucose, lactose, dopamine (DA), potassium chloride (KCl), ascorbic acid (AA), amino acids, uric acid (UA), oxalic acid (OA), sodium chloride (NaCl) and acetaminophen (PA) have been carried out. The FAD/Ti₃C₂T_x/GCE showed high selectivity and reproducibility. Finally, the FAD/Ti₃C₂T_x modified electrode was successfully applied to detect H₂O₂ in ovarian cancer cell lines.

The ghost nets phenomena from the chemical perspective

The XXIst century might be called the Plastic Era. With the continually growing consumption and production, low recycling level, one observes the continuous transformation of the Blue Planet into the Ocean of Plastics. Among various problems related to the presence of synthetic materials in the environment, the ghost nets draw particular attention. They are present in the global ocean due to lost or abandoned fishing gear. Their impact on the environment is represented by the tones of animals caught. Moreover, they are an abundant source of secondary marine microplastic and release a considerable amount of toxic chemical compounds. To resolve this issue, an interdisciplinary approach is needed. Chemical research enables a better understanding of polymer behaviour and their weathering, whereas spectroscopy helps in qualitative analyses and proposes solutions. This paper aims to present the interdisciplinary study of this phenomenon and its broad context, including social awareness but underlines the crucial role of chemical research. One focuses on the basic studies of chemical and physical properties as this knowledge provides the first and essential step to tackle the problem.

Effect of neutral red incorporation on Al-doped ZnO thin films and its bio-electrochemical interaction with NAD+/NADP+ dependent enzymes

A new approach to deposition of electroactive ZnO thin films have been carried out, by one-pot chemical bath deposition with Al dopant and incorporation of neutral red as organic mediator. The morphological, structural and functional characterization of the neutral red incorporated, Al-doped ZnO (NR-AZO) film was carried out using electron microscopy, FTIR, XRD and EIS respectively. The incorporated neutral red was found to induce strain in the crystal of AZO proportional to the concentration used in depositing solution which further affected the charge transfer resistance of the films in solution. One mM neutral red was found to be the optimum concentration for both conductivity and response to NADH/NADPH. The response of the films was further validated by immobilizing NAD⁺ dependent alcohol dehydrogenase (ADH) and NADP⁺ dependent glucose dehydrogenase (GDH) independently. The ADH/NR-AZO showed a sensitivity of 3.2 μA cm^-2 mM^-1 with a LoD of 1.7 μM of ethanol in the range 5.6 μM-7 mM, whereas GDH/NR-AZO showed a sensitivity of 4.33 μA cm^-2 mM^-1 with a LoD of 27 μM of glucose in the range 90 μM-4 mM. This method serves as a simple alternative to immobilize the organic redox dyes into the inorganic thin films in a single step making it electroactive towards specific biomolecules.

A novel nonenzymatic hydrogen peroxide amperometric sensor based on Pd@CeO2-NH2 nanocomposites modified glassy carbon electrode

Herein, (3-aminopropyl)triethoxysilane functionalized cerium (IV) oxide (CeO₂-NH₂) supported Pd nanoparticles were synthesized. The nanocomposites were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and High-resolution transmission electron microscopy (HRTEM). The Pd@CeO₂-NH₂ showed better electrocatalytic response to the reduction of H₂O₂ than CeO₂-NH₂. The fabricated sensor exhibited two linear responses to the reduction of H₂O₂. The first one was from 0.001 to 3.276 mM with 0.47 μM of a limit of detection (LOD) (S/N = 3) and excellent sensitivity of 440.72 μA mM^-1 cm^-2 and the second one was from 3.276 to 17.500 mM with the sensitivity of 852.65 μA mM^-1 cm^-2 in the optimum conductions. Also, the sensor exhibited 91% of electrocatalytic activity toward H₂O₂ after having been used for 30 days and the reproducibility was also satisfactory. The sensor response to H₂O₂ was not affected by ascorbic acid, fructose, glycine, dopamine, arginine, mannose, glucose, uric acid, Mg⁺², Ca⁺², and phenylalanine at the studied potential. Also, the fabricated sensor was used to determine H₂O₂ in milk samples. The results show that the constructed sensor can be a promising devise for the determination of H₂O₂ in real samples.

A Comparative Study of Poly(Azure A) Film-Modified Disposable Electrodes for Electrocatalytic Oxidation of H₂O₂: Effect of Doping Anion

In the present paper, poly(azure A) (PAA) films were electrosynthetized in the presence of different doping anions on disposable screen-printed carbon electrodes (SPCEs). The anions used included inorganic monoatomic (chloride and fluoride), inorganic polyatomic (nitrate and sulfate) and organic polyatomic (dodecyl sulfate, DS) species. The coated electrodes thus obtained were characterized by electrochemical techniques and SEM. They showed improved electrocatalytic activities towards hydrogen peroxide oxidation compared to that of a bare SPCE. In particular, the insertion of DS anions inside PAA films provided a special sensitivity to the electrocatalysis of H₂O₂, which endowed these electrodes with promising analytical features for H₂O₂ quantification. We obtained a wide linear response for H₂O₂ within a range of 5 µM to 3 mM and a limit of detection of 1.43 ± 0.10 µM (signal-to-noise ratio of 3). Furthermore, sensitivity was 72.4 ± 0.49 nA·µM⁻¹∙cm⁻² at a relatively low electrocatalytic oxidation overpotential of 0.5 V vs. Ag. The applicability of this boosted system was tested by the analysis of H₂O₂ in commercial samples of a hair lightener and an antiseptic and was corroborated by spectrophotometric methods.

A highly sensitive NADH sensor based on a mycelium-like nanocomposite using graphene oxide and multi-walled carbon nanotubes to co-immobilize poly(luminol) and poly(neutral red) hybrid films

Hybridization of poly(luminol) (PLM) and poly(neutral red) (PNR) has been successfully performed and further enhanced by a conductive and steric hybrid nanotemplate using graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs). The morphology of the PLM-PNR-MWCNT-GO mycelium-like nanocomposite is studied by SEM and AFM and it is found to be electroactive, pH-dependent, and stable in the electrochemical system. It shows electrocatalytic activity towards NADH with a high current response and low overpotential. Using amperometry, it has been shown to have a high sensitivity of 288.9 μA mM(-1) cm(-2) to NADH (Eapp. = +0.1 V). Linearity is estimated in a concentration range of 1.33 × 10(-8) to 1.95 × 10(-4) M with a detection limit of 1.33 × 10(-8) M (S/N = 3). Particularly, it also shows another linear range of 2.08 × 10(-4) to 5.81 × 10(-4) M with a sensitivity of 151.3 μA mM(-1) cm(-2). The hybridization and activity of PLM and PNR can be effectively enhanced by MWCNTs and GO, resulting in an active hybrid nanocomposite for determination of NADH.

Using multi-walled carbon nanotubes to enhance coimmobilization of poly(azure A) and poly(neutral red) for determination of nicotinamide adenine dinucleotide and hydrogen peroxide

Illustration of electro-codeposition of azure A and neutral red hybrid films using high ly conductive and steric MWCNTs as a template.

A sensitive NADH and ethanol biosensor based on graphene-Au nanorods nanocomposites

In this paper, a simple strategy for the synthesis of graphene-Au nanorods hybrid nanosheets (GN-AuNRs) through electrostatic interaction has been demonstrated. Due to the synergistic effect between AuNRs and GN, the hybrid nanosheets exhibited excellent performance toward dihydronicotinamide adenine dinucleotide (NADH) oxidation, with a low detection limit of 6 µM. The linear GN-AuNRs also served as a biocompatible and electroactive matrix for enzyme assembly to facilitate the electron transfer between the enzyme and the electrode. Using alcohol dehydrogenase (ADH) as a model system, a simple and effective sensing platform was developed for ethanol assay. The response displayed a good linear range from 5 to 377 µM with detection limit 1.5 μM. Furthermore, the interference effects of redox active substances, such as uric acid, ascorbic acid and glucose for the proposed biosensor were negligible.