Silver Nanoparticle Sensor Array-Based Meat Freshness Inspection System

The series of biochemical reactions, metabolic pathways, and regulatory interactions that occur during the storage of meat are the main causes of meat loss and waste. The volatile compounds produced by these reactions, such as hydrogen sulfide, acids, and amines, can directly indicate changes in the freshness of meat during storage and sales. In this study, a one-pot hydrothermal method based on a surface control strategy was used to develop nanoparticles of silver with different reactivities, which were further immobilized in agar powder to develop a colorimetric sensor array. Due to the different chemical interactions with various volatile compounds, the colorimetric sensor array exhibited distinct color changes. The study demonstrates significant differences between 12 different volatile compounds and provides a quantitative and visual method to reveal rich detection indicators. The colorimetric sensor array is an economical and practical multi-analyte identification method. It has many potential applications such as food packaging, anti-counterfeiting, health monitoring, environmental monitoring, and optical filters.

Bio-inspired polymer array vapor sensor with dual signals of fluorescence intensity and wavelength shift

Organic vapor sensors based on polymer owing to their tunable molecular structures and designable functions have attracted considerable research interest. However, detecting multiple organic vapors with high accuracy and a low detection limit is still challenging. Herein, inspired by the mammalian olfactory recognition system, organic vapor sensors based on one-dimensional microfilament array structures with a wide range of sensing gases are demonstrated. By introducing aggregation-induced emission (AIE) molecules, sensors possess dual-optical sensing mechanisms of variation in fluorescence intensity and wavelength. By virtue of the synergistic effects of dual signals, superb accuracy and incredibly low detection limit are achieved for identifying analytes. In particular, the polymer/AIE microfilament array can detect acetone vapor down to 0.03% of saturated vapor pressure. In the saturated vapor of acetone, the fluorescence intensity of the sensor arrays was reduced by 53.7%, while the fluorescence wavelength was red-shifted by 21 nm. Combined with the principal component analysis (PCA) algorithm, the polymer/AIE molecular sensor arrays accomplished the classification and identification of acetone, ethanol, methylene chloride, toluene, and benzene. This bioinspired approach with dual sensing signals may broaden practical applications to high-performance gas sensors for precise molecular detection.

A Colorimetric Ag+ Probe for Food Real-Time Visual Monitoring

Monitoring food quality throughout the food supply chain is critical to ensuring global food safety and minimizing food losses. Here we find that simply by mixing an aqueous solution of sugar-stabilized Ag+ and amines in an open vessel leads to the generation of Ag NPs and an intelligent evaluation system based on a colorimetric Ag+ probe is developed for real-time visual monitoring of food freshness. The self-assembly reaction between methylamine (MA) generated during meat storage and the colorimetric Ag+ probe produces different color changes that indicate changes in the quality of the meat. The colorimetric Ag+ probe was integrated into food packaging systems for real-time monitoring of chilled broiler meat freshness. The proposed evaluation system provides a versatile approach for detecting biogenic amines and monitoring chilled broiler meat freshness and it has the advantages of high selectivity, real-time and on-site measurements, sensitivity, economy, and safety and holds great public health significance.

A novel calix[4]arene-modified porphyrin-based dual-mode sensor for the specific detection of dopamine with excellent performance

A dual-mode sensor for dopamine with remarkable specificity is developed based on a novel calix[4]arene-functionalized porphyrin derivative.

An in situ self-assembled Cu4I4–MOF-based mixed matrix membrane: a highly sensitive and selective naked-eye sensor for gaseous HCl

A Cu₄I₄–MOF-based mixed matrix membrane which can be a highly sensitive and selective naked-eye sensor for gaseous HCl is reported.

Donor/acceptor chromophores-decorated triazolyl unnatural nucleosides: synthesis, photophysical properties and study of interaction with BSA

We report the syntheses and photophysical properties of some triazolyl donor/acceptor unnatural nucleosides and studies on the interaction of one of the fluorescent nucleosides with BSA.

Pattern-Based Detection of Anion Pollutants in Water with DNA Polyfluorophores

Many existing irrigation, industrial and chemical storage sites are currently introducing hazardous anions into groundwater, making the monitoring of such sites a high priority. Detecting and quantifying anions in water samples typically requires complex instrumentation, adding cost and delaying analysis. Here we address these challenges by development of an optical molecular method to detect and discriminate a broad range of anionic contaminants with DNA-based fluorescent sensors. A library of 1296 tetrameric-length oligodeoxyfluorosides (ODFs) composed of metal ligand and fluorescence modulating monomers was constructed with a DNA synthesizer on PEG-polystyrene microbeads. These oligomers on beads were incubated with YIII or ZnII ions to provide affinity and responsiveness to anions. Seventeen anions were screened with the library under an epifluorescence microscope, ultimately yielding eight chemosensors that could discriminate 250 μM solutions of all 17 anions in buffered water using their patterns of response. This sensor set was able to identify two unknown anion samples from ten closely-responding anions and could also function quantitatively, determining unknown concentrations of anions such as cyanide (as low as 1 mM) and selenate (as low as 50 μM). Further studies with calibration curves established detection limits of selected anions including thiocyanate (detection limit ~300 μM) and arsenate (~800 μM). The results demonstrate DNA-like fluorescent chemosensors as versatile tools for optically analyzing environmentally hazardous anions in aqueous environments.

Large-scale detection of metals with a small set of fluorescent DNA-like chemosensors

An important advantage of pattern-based chemosensor sets is their potential to detect and differentiate a large number of analytes with only few sensors. Here we test this principle at a conceptual limit by analyzing a large set of metal ion analytes covering essentially the entire periodic table, employing fluorescent DNA-like chemosensors on solid support. A tetrameric “oligodeoxyfluoroside” (ODF) library of 6561 members containing metal-binding monomers was screened for strong responders to 57 metal ions in solution. Our results show that a set of 9 chemosensors could successfully discriminate the 57 species, including alkali, alkaline earth, post-transition, transition, and lanthanide metals. As few as 6 ODF chemosensors could detect and differentiate 50 metals at 100 μM; sensitivity for some metals was achieved at midnanomolar ranges. A blind test with 50 metals further confirmed the discriminating power of the ODFs.

Pattern-based detection of toxic metals in surface water with DNA polyfluorophores

Heavy metal contamination of water can be toxic to humans and wildlife; thus the development of methods to detect this contamination is of high importance. Here we describe the design and application of DNA-based fluorescent chemosensors on microbeads to differentiate eight toxic metal ions in water. We developed and synthesized four fluorescent 2'-deoxyribosides of metal-binding ligands. A tetramer-length oligodeoxy-fluoroside (ODF) library of 6561 members was constructed and screened for sequences responsive to metal ions, of which seven sequences were selected. Statistical analysis of the response patterns showed successful differentiation of the analytes at concentrations as low as 100 nM. Sensors were able to classify water samples from 13 varied sites and quantify metal contamination in unknown specimens. The results demonstrate the practical potential of bead-based ODF chemosensors to analyze heavy metal contamination in water samples by a simple and inexpensive optical method.

DNA-polyfluorophore Chemosensors for Environmental Remediation: Vapor-phase Identification of Petroleum Products in Contaminated Soil

Contamination of soil and groundwater by petroleum-based products is an extremely widespread and important environmental problem. Here we have tested a simple optical approach for detecting and identifying such industrial contaminants in soil samples, using a set of fluorescent DNA-based chemosensors in pattern-based sensing. We used a set of diverse industrial volatile chemicals to screen and identify a set of five short oligomeric DNA fluorophores on PEG-polystyrene microbeads that could differentiate the entire set after exposure to their vapors in air. We then tested this set of five fluorescent chemosensor compounds for their ability to respond with fluorescence changes when exposed to headgas over soil samples contaminated with one of ten different samples of crude oil, petroleum distillates, fuels, lubricants and additives. Statistical analysis of the quantitative fluorescence change data (as Δ(R,G,B) emission intensities) revealed that these five chemosensors on beads could differentiate all ten product mixtures at 1000 ppm in soil within 30 minutes. Tests of sensitivity with three of the contaminant mixtures showed that they could be detected and differentiated in amounts at least as low as one part per million in soil. The results establish that DNA-polyfluorophores may have practical utility in monitoring the extent and identity of environmental spills and leaks, while they occur and during their remediation.

An ICT-based strategy to a colorimetric and ratiometric fluorescence probe for hydrogen sulfide in living cells

We present a colorimetric and ratiometric fluorescent probe Cy-N(3) that exhibits a selective response to H(2)S. The probe employs a near-infrared cyanine as a fluorophore, and is equipped with an operating azide unit. It is readily employed for assessing intracellular H(2)S levels, and confocal ratiometric imaging is achieved successfully.

Fluorescent DNA chemosensors: identification of bacterial species by their volatile metabolites

Polyfluorophores built on a DNA scaffold (ODFs) were synthesized and tested for fluorescence responses to the volatiles from M. tuberculosis, E. coli and P. putida in closed Petri dishes. Two sensors in a pattern-based response could distinguish the bacterial strains accurately, suggesting the use of ODFs in rapid identification of infectious agents.