Proton Conducting Metal-Organic Frameworks (MOFs) via Post Synthetic Transmetallation and Water Induced Structural Transformations

Post Synthetic Modification (PSM) of Metal-Organic Frameworks (MOFs) is a crucial strategy for developing new MOFs with enhanced functional properties compared to their parent one. PSM can be accomplished through various methods:1) modification of organic linkers; 2) exchange of metal ions or nodes; and 3) inclusion or exchange of solvent/guest molecules. Herein, PSM of bimetallic and monometallic MOFs containing biphenyl dinitro-tetra-carboxylates (NCA) are demonstrated. The tetra carboxylate NCA, produces monometallic Cd-MOF-1 and Cu-MOF-1 and bimetallic CoZn-MOF in solvothermal reactions with the corresponding metal salts. The CoZn-MOF undergoes post-synthetic transmetallation with Cd(NO3)2 and Cu(NO3)2 in aqueous solution to yield Cd-MOF-2 and Cu-MOF-2, respectively. Additionally, green crystals of Cu-MOF-1 found to undergo a single-crystal-to-single-crystal (SCSC) transformation to blue crystals of Cu-MOF-3 upon dipped into water at room temperature. These MOFs demonstrate notable proton conductivities ranging from 10-3 to 10-4 S cm-1 under variable temperatures and humidity levels. Among them, Cu-MOF-3 achieves the highest proton conductivity of 1.36×10-3 S cm-1 at 90 °C and 98 % relative humidity, attributed to its continuous and extensive hydrogen bonding network, which provides effective proton conduction pathways within the MOF. This work highlights a convenient strategy for designing proton-conducting MOFs via post-synthetic modification.

Quantitative Description of Isomorphism in the Series of Simple Compounds

The introduction of the notion of energy change resulting from the ion exchange in apatites leads to the question: how can some simple isomorphic series be described using the mentioned idea? We concentrated on the simple isomorphic series of compounds: apatite, bioapatite, calcite, aragonite, celestine, K-, Zn- and Cu-Tutton's salts. It was demonstrated in all the series, except Tutton's salts, that the change in energy and the change in the crystal cell volume are, in a simple way, dependent on the change in the ionic radii of the introduced ions. The linear relationships between the variations in energy and in the universal crystallographic dimension d were derived from the earlier equations and proven based on available data. In many cases, except the Tutton's salts, linear dependence was discovered between the change in energy and the sinus of universal angle Θ, corresponding to the change in momentum transfer. In the same cases, linear dependencies were observed between the energy changes and the changes in the volumes of crystallographic cells, and mutually between changes in the crystallographic cell volume V, crystallographic dimension d, and diffraction angle Θ.

Directing the Morphology, Packing, and Properties of Chiral Metal-Organic Frameworks by Cation Exchange

We show that metal-organic frameworks, based on tetrahedral pyridyl ligands, can be used as a morphological and structural template to form a series of isostructural crystals having different metal ions and properties. An iterative crystal-to-crystal conversion has been demonstrated by consecutive cation exchanges. The primary manganese-based crystals are characterized by an uncommon space group (P622). The packing includes chiral channels that can mediate the cation exchange, as indicated by energy-dispersive X-ray spectroscopy on microtome-sectioned crystals. The observed cation exchange is in excellent agreement with the Irving-Williams series (MnZn) associated with the relative stability of the resulting coordination nodes. Furthermore, we demonstrate how the metal cation controls the optical and magnetic properties. The crystals maintain their morphology, allowing a quantitative comparison of their properties at both the ensemble and single-crystal level.

Amine-substituent induced highly selective and rapid "turn-on" detection of carcinogenic 1,4-dioxane from purely aqueous and vapour phase with novel post-synthetically modified d10-MOFs

Herein, an amine decorated Cd(II) metal-organic framework (MOF) with a uninodal 6-c topology was synthesized as a suitable platform for facile post-synthetic modification (PSM). The as-synthesized parent d¹⁰-MOF (1) with free -NH₂ centers, when functionalized with two different carbonyl substituents (1-naphthaldehyde and benzophenone) of varying conjugation, produces two novel luminescent MOFs (LMOFs) viz.PSM-1 and PSM-2. The judicious incorporation of carbonyl substituents into the skeleton of 1 was rationalized via ESI-MS, ¹H-NMR, FT-IR and PXRD analyses. Interestingly, both PSM-1 and PSM-2 show 'turn-on' luminescent behaviour in the presence of 1,4-dioxane with the limit of detection (LOD) as 1.079 ppm and 2.487 ppm, respectively, with prompt response time (∼55 s & ∼58 s, respectively). The inhibition of PET is comprehended to be the prime reason for luminescence enhancement upon interaction with the targeted analyte which was further validated from DFT calculations. In continuation, the PSM-MOFs were equally responsive towards 1,4-dioxane in several complex environmental matrices and cosmetic products. Additionally, vapor phase detection of 1,4-dioxane using PSM-MOFs has also been demonstrated as an additional advantage ensuring propagation of future research endeavour.

Pyrene-based metal organic frameworks: from synthesis to applications

Pyrene is one of the most widely investigated aromatic hydrocarbons given to its unique optical and electronic properties. Hence, pyrene-based ligands have been attractive for the synthesis of metal-organic frameworks (MOFs) in the last few years. In this review, we will focus on the most important characteristics of pyrene, in addition to the development and synthesis of pyrene-based molecules as bridging ligands to be used in MOF structures. We will summarize the synthesis attempts, as well as the post-synthetic modifications of pyrene-based MOFs by the incorporation of metals or ligands in the structure. The discussion of promising results of such MOFs in several applications; including luminescence, photocatalysis, adsorption and separation, heterogeneous catalysis, electrochemical applications and bio-medical applications will be highlighted. Finally, some insights and future prospects will be given based on the studies discussed in the review. This review will pave the way for the researchers in the field for the design and development of novel pyrene-based structures and their utilization for different applications.

Post-synthetic modification of supramolecular assemblies of β-diketonato Cu(ii) complexes: comparing and contrasting the molecular topology by crystal structure and quantum computational studies

Solvent-induced structural transformations on the metal coordination sphere in homoleptic (1 and 2) and heteroleptic (3 and 4) Cu(ii) complexes were analyzed and investigated by crystallographic and quantum computational studies.

Transmetalation in a Ce(III)-phosphoester Crystalline Coordination Polymer with an Exceptionally High Selectivity for Yb(III) and Lu(III)

A novel crystalline coordination polymer containing Ce³⁺ and bis(4-nitrophenyl) phosphate (L), CeL₃ , was synthesized and its unique transmetalation selectivities toward Yb³⁺ and Lu³⁺ in the lanthanide series were evaluated. The relatively large difference in transmetalation selectivity between the neighboring Tm³⁺ and Yb³⁺ species is noteworthy because the reactivities of heavy lanthanides are generally considerably similar. The structural strain of the polymeric framework is likely responsible for this unusual trend. Powder X-ray diffraction analysis indicated that, in the cases of only Yb³⁺ and Lu³⁺ , large differences in their ionic sizes compared to that of Ce³⁺ in the parent framework may induce a structural strain after solid solution formation, while cleavage of the relatively weak Ce-O bond allows the formation of new Yb-O and Lu-O bonds with the incoming Yb³⁺ and Lu³⁺ , respectively. Structural phase transitions likely caused by the heterogeneous nucleation of the Yb- (or Lu-) type phase were also observed.

A 116-Nuclear Metallosupramolecular Cage-of-Cage Showing Multistep Single-Crystal-to-Single-Crystal Transformation

Here a unique single-crystal-to-single-crystal (SCSC) transformation of a 116-nuclear Au^I ₇₂ Cd^II ₄₀ Na^I ₄ cage-of-cage (2_CdNa ) is reported, which was created from a trigold(I) metalloligand with d-penicillamine by way of a 9-nuclear Au^I ₆ Cd^II ₃ cage (1). Cage-of-cage 2_CdNa is composed of 12 cages of 1 that are linked by 4 Cd²⁺ and 4 Na⁺ ions, with its surface being covered by 12 NO₃ ^- ions to form a discrete, spherical molecule with a diameter ca. 4.7 nm. In crystal 2_CdNa , the cage-of-cage molecules are packed in a cubic lattice with a huge cell volume of ca. 4.5×10⁵  ų _, so as to have large interstices with diameters of more than 3 nm. Upon soaking crystals 2_CdNa in aqueous Cu(NO₃ )₂ , all Cd²⁺ and Na⁺ were quickly exchanged by Cu²⁺ to produce an analogous Au^I ₇₂ Cu^II ₄₄ cage-of-cage (2_Cu ) in a SCSC manner. Prolonged soaking led to the SCSC transformation to another supramolecular structure (2'_Cu ) consisting of 152-nuclear Au^I ₇₂ Cu^II ₈₀ cage-of-cages that are alternately H-bonded with the Au^I ₇₂ Cu^II ₄₄ cage-of-cages. 2'_Cu showed the accommodation of MoO₄ ^2- and the conversion of MoO₄ ^2- to β-Mo₈ O₂₆ ^4- in the crystal, with retention of single-crystallinity.

Copper nanowires and copper foam multifunctional bridges in zeolitic imidazolate framework-derived anode material for superior lithium storage

Herein, a synthetic strategy for growing trimetallic zeolitic imidazolate framework (ZIF) polyhedrons on copper foam (CF) and interweaving with copper nanowires (CNWs) is proposed. Subsequently, in situ annealing under N₂ atmosphere leads to the formation of multi-doped CNWs/Cu_0.39Zn_0.14Co_2.47O₄-ZnO/CF (CNWs/CZCOZ/CF). The unique structural characteristics of CNWs/CZCOZ/CF allow it to be directly assembled as a working electrode, without additional conductive additives or binders. When it's used as the lithium-ion battery (LIB) anode, this electrode exhibits a significantly high capacity of 2305 mAh g^-1 at 0.1 A g^-1 after 500 cycles. More importantly, kinetic analysis on the basis of cyclic voltammograms (CVs) indicates that the pseudocapacitive effect is the primary contributor to the high lithium storage capacity and also accounts for the exceptionally high rate capacity of 713 mAh g^-1 even if the current density is at a maximum of 10 A g^-1. Moreover, the superior battery performance originates from their advantageous structural diversity and unique compositional features, including synergistic effects among polymetallic components and two highly conductive substrates (CNWs and CF), forming unhindered paths for fast charge transfer.

Templating metastable Pd2 carboxylate aggregates

Evaluation of the potential for metal-metal (M-M) cooperation to enable catalysis requires access to specific polynuclear aggregates that display appropriate geometry and size. In many cases, exerting synthetic control over the aggregation of simple metal salts is a challenge. For example, Pd(ii) acetate self assembles as a trimer (i.e. Pd3(OAc)6) both in the solid state and in solution and does not feature close Pd-Pd interactions. Related carboxylate-supported Pd2 aggregates (i.e. Pd2(OAc)4), which would feature close Pd-Pd interactions, are thermodynamically metastable in solution phase and thus largely unavailable. Here we demonstrate ion metathesis within pre-formed metal-organic frameworks (MOFs) to prepare metastable Pd2 tetracarboxylates sites. The newly synthesized materials are characterized by elemental analysis, PXRD, SCXRD, EXAFS, XANES, and gas adsorption analysis. In addition, the critical role of network solvation on the kinetics of ion metathesis was revealed by coupled TGA-MS and ICP-MS experiments. The demonstration of templated ion metathesis to generate specific metastable coordination sites that are inaccessible in solution phase chemistry represents a new opportunity to interrogate the chemistry of specific polynuclear metal aggregates.

Rare metal-ion metathesis of a tetrahedral Zn(ii) core of a noncentrosymmetric (3,4)-connected 3D MOF

An SHG-active framework of 1-Zn can undergo metal metathesis, in which the tetrahedrally coordinated Zn(ii) ions are completely exchanged with Cu(ii) ions while retaining the integrity of the network.

Formation of N-Doped Carbon-Coated ZnO/ZnCo2 O4 /CuCo2 O4 Derived from a Polymetallic Metal-Organic Framework: Toward High-Rate and Long-Cycle-Life Lithium Storage

Metal-organic frameworks (MOFs) are very promising self-sacrificing templates for the large-scale fabrication of new functional materials owing to their versatile functionalities and tunable porosities. Most conventional metal oxide electrodes derived from MOFs are limited by the low abundance of incorporated metal elements. This study reports a new strategy for the synthesis of multicomponent active metal oxides by the pyrolysis of polymetallic MOF precursors. A hollow N-doped carbon-coated ZnO/ZnCo₂ O₄ /CuCo₂ O₄ nanohybrid is prepared by the thermal annealing of a polymetallic MOF with ammonium bicarbonate as a pore-forming agent. This is the first report on the rational design and preparation of a hybrid composed of three active metal oxide components originating from MOF precursors. Interestingly, as a lithium-ion battery anode, the developed electrode delivers a reversible capacity of 1742 mAh g^-1 after 500 cycles at a current density of 0.3 mA g^-1 . Furthermore, the material shows large storage capacities (1009 and 667 mAh g^-1 ), even at high current flow (3 and 10 A g^-1 ). The remarkable high-rate capability and outstanding long-life cycling stability of the multidoped metal oxide benefits from the carbon-coated integrated nanostructure with a hollow interior and the three active metal oxide components.