Electrical Responsive Coating with a Multilayered TiO2-SnO2-RuO2 Heterostructure on Ti for Controlling Antibacterial Ability and Improving Osseointegration

The bacterial infection and poor osseointegration of Ti implants could significantly compromise their applications in bone repair and replacement. Based on the carrier separation ability of the heterojunction and the redox reaction of pseudocapacitive metal oxides, we report an electrically responsive TiO2-SnO2-RuO2 coating with a multilayered heterostructure on a Ti implant. Owing to the band gap structure of the TiO2-SnO2-RuO2 coating, electron carriers are easily enriched at the coating surface, enabling a response to the endogenous electrical stimulation of the bone. With the formation of SnO2-RuO2 pseudocapacitance on the modified surface, the postcharging mode can significantly change the surface chemical state of the coating due to the redox reaction, enhancing the antibacterial ability and osteogenesis-related gene expression of the human bone marrow mesenchymal stem cells. Owing to the attraction for Ca2+, only the negatively postcharged SnO2@RuO2 can promote apatite deposition. The in vivo experiment reveals that the S-SnO2@RuO2-NP could effectively kill the bacteria colonized on the surface and promote osseointegration with the synostosis bonding interface. Thus, negatively charging the electrically responsive coating of TiO2-SnO2-RuO2 is a good strategy to endow modified Ti implants with excellent antibacterial ability and osseointegration.

Linker-Assisted Assembly of Ligand-Bridged CdS/MoS2 Heterostructures: Tunable Light-Harvesting Properties and Ligand-Dependent Control of Charge-Transfer Dynamics and Photocatalytic Hydrogen Evolution

We used linker-assisted assembly (LAA) to tether CdS quantum dots (QDs) to MoS2 nanosheets via L-cysteine (cys) or mercaptoalkanoic acids (MAAs) of varying lengths, yielding ligand-bridged CdS/MoS2 heterostructures for redox photocatalysis. LAA afforded precise control over the light-harvesting properties of QDs within heterostructures. Photoexcited CdS QDs transferred electrons to molecularly linked MoS2 nanosheets from both band-edge and trap states; the electron-transfer dynamics was tunable with the properties of bridging ligands. Rate constants of electron transfer, estimated from time-correlated single photon counting (TCSPC) measurements, ranged from (9.8 ± 3.8) × 106 s-1 for the extraction of electrons from trap states within heterostructures incorporating the longest MAAs to >5 × 109 s-1 for the extraction of electrons from band-edge or trap states in heterostructures with cys or 3-mercaptopropionic acid (3MPA) linkers. Ultrafast transient absorption measurements revealed that electrons were transferred within 0.5-2 ps or less for CdS-cys-MoS2 and CdS-3MPA-MoS2 heterostructures, corresponding to rate constants ≥5 × 109 s-1. Photoinduced CdS-to-MoS2 electron transfer could be exploited in photocatalytic hydrogen evolution reaction (HER) via the reduction of H+ to H2 in concert with the oxidation of lactic acid. CdS-L-MoS2-functionalized FTO electrodes promoted HER under oxidative conditions wherein H2 was evolved at a Pt counter electrode with Faradaic efficiencies of 90% or higher and under reductive conditions wherein H2 was evolved at the CdS-L-MoS2-heterostructure-functionalized working electrode with Faradaic efficiencies of 25-40%. Dispersed CdS-L-MoS2 heterostructures promoted photocatalytic HER (15.1 μmol h-1) under white-light illumination, whereas free cys-capped CdS QDs produced threefold less H2 and unfunctionalized MoS2 nanosheets produced no measurable H2. Charge separation across the CdS/MoS2 interface is thus pivotal for redox photocatalysis. Our results reveal that LAA affords tunability of the properties of constituent CdS QDs and MoS2 nanosheets and precise, programmable, ligand-dependent control over the assembly, interfacial structure, charge-transfer dynamics, and photocatalytic reactivity of CdS-L-MoS2 heterostructures.

Hierarchical CoS2/MoS2 flower-like heterostructured arrays derived from polyoxometalates for efficient electrocatalytic nitrogen reduction under ambient conditions

Electrochemical nitrogen reduction reaction (NRR) has been identified as a prospective alternative for sustainable ammonia production. Developing cost-effective and highly efficient electrocatalysts is critical for NRR under ambient conditions. Herein, the hierarchical cobalt-molybdenum bimetallic sulfide (CoS₂/MoS₂) flower-like heterostructure assembled from well-aligned nanosheets has been easily fabricated through a one-step strategy. The efficient synergy between different components and the formation of heterostructure in CoS₂/MoS₂ nanosheets with abundant active sites makes the non-noble metal catalyst CoS₂/MoS₂ highly effective in NRR, with a high NH₃ yield rate (38.61 μg h^-1 mg_cat.^-1), Faradaic efficiency (34.66%), high selectivity (no formation of hydrazine) and excellent long-term stability in 1.0 mol L^-1 K₂SO₄ electrolyte (pH = 3.5) at -0.25 V versus the reversible hydrogen electrode (vs. RHE) under ambient conditions, exceeding much recently reported cobalt- and molybdenum-based materials, even catch up with some noble-metal-based catalyst. Density functional theory (DFT) calculation indicates that the formation of N₂H* species on CoS₂(200)/MoS₂(002) is the rate-determining step via both the alternating and distal pathways with the maximum ΔG values (1.35 eV). These results open up opportunities for the development of efficient non-precious bimetal-based catalysts for NRR.

Mapping the effect of geometry on the radiative rate in core/shell QDs: core size dictates the conduction band offset

Computational models have been developed that can accurately predict the electronic structure and thus optical properties of a variety of quantum dot (QD) materials. However, the application of these models to core/shell and other heterostructured QDs has received less experimental corroboration owing to the difficulty in systematically synthesizing and characterizing large ranges of geometries. In the current work, we synthesized a library of core/shell CdSe/CdS QDs with varying core sizes and shell thicknesses, and have characterized their radiative recombination rates. We find that the core size has only a modest effect on the radiative recombination rates, far less than is predicted by conventional effective mass models. In order to theoretically describe the experimental data, we performed an empirical modification of an effective mass model. We find that the conduction band offset between CdSe and CdS must be empirically altered based on QD core size in order to match our experimental data. This is hypothesized to be a result of reduced interfacial strain in core/shell QDs with smaller cores. The resultant relationship between conduction band offset and core size is used to create a predictive map of radiative lifetime as a function of core size and shell thickness. This map will be useful to researchers implementing CdSe/CdS core/shell QDs for a variety of applications since it can provide geometry specific excited state lifetimes.

Predicting the radiative rate in CdSe/CdS core/shell quantum dots is made possible by using a core-size-dependent conduction band offset.

Excited-State Charge Transfer and Extended Charge Separation within Covalently Tethered Type-II CdSe/CdTe Quantum Dot Heterostructures: Colloidal and Multilayered Systems

We used N,N'-dicyclohexylcarbodiimide (DCC) coupling chemistry to synthesize (1) heterostructures of CdSe and CdTe quantum dots (QDs) in colloidal dispersions and (2) heterostructures of CdSe and CdTe QDs, as well as CdS and CdSe QDs, immobilized on metal oxide thin films. The DCC-mediated formation of amide bonds between terminal carboxylic acid and amine groups of ligands on different QDs drove the formation of heterostructures. This cross-linking mechanism selectively yields heterostructures and prohibits the undesired formation of homostructures consisting of just one type of QD. Products of adsorption, ligand-exchange, and covalent-coupling reactions were characterized by transmission electron microscopy and ATR-FTIR, ¹H NMR, electronic absorption, steady-state emission, and time-resolved emission spectroscopy. Ground-state absorption spectra of constituent QDs were unperturbed upon incorporation into heterostructures, enabling control over electronic properties. Heterostructures of CdSe and CdTe QDs exhibit type-II interfacial energetic offsets that promote charge separation following excitation of either QD. Indeed, photoexcited CdTe QDs transferred electrons to CdSe, and photoexcited CdSe QDs transferred holes to CdTe, on time scales of 10-100 ns, as evidenced by dynamic quenching of band-edge and trap-state emission. Mixed dispersions of noninteracting QDs did not undergo excited-state charge transfer. Constructing heterostructures on TiO₂ thin films introduced an additional charge-transfer pathway, electron transfer from QDs to TiO₂, which occurred on subnanosecond time scales and enabled extended spatial separation of photogenerated electrons and holes. Our results reveal that carbodiimide coupling chemistry can be used to tether colloidal QDs selectively and covalently to each other, yielding dispersed or immobilized heterostructures with programmable compositions and energetic offsets that can undergo efficient excited-state interfacial electron transfer.

Elucidating the Mechanistic Origins of Photocatalytic Hydrogen Evolution Mediated by MoS2/CdS Quantum-Dot Heterostructures

Solar fuel generation mediated by semiconductor heterostructures represents a promising strategy for sustainable energy conversion and storage. The design of semiconductor heterostructures for photocatalytic energy conversion requires the separation of photogenerated charge carriers in real space and their delivery to active catalytic sites at the appropriate overpotentials to initiate redox reactions. Operation of the desired sequence of light harvesting, charge separation, and charge transport events within heterostructures is governed by the thermodynamic energy offsets of the two components and their photoexcited charge-transfer reactivity, which determine the extent to which desirable processes can outcompete unproductive recombination channels. Here, we map energetic offsets and track the dynamics of electron transfer in MoS₂/CdS architectures, prepared by interfacing two-dimensional MoS₂ nanosheets with CdS quantum dots (QDs), and correlate the observed charge separation to photocatalytic activity in the hydrogen evolution reaction. The energetic offsets between MoS₂ and CdS have been determined using hard and soft X-ray photoemission spectroscopy (XPS) in conjunction with density functional theory. A staggered type-II interface is observed, which facilitates electron and hole separation across the interface. Transient absorption spectroscopy measurements demonstrate ultrafast electron injection occurring within sub-5 ps from CdS QDs to MoS₂, allowing for creation of a long-lived charge-separated state. The increase of electron concentration in MoS₂ is evidenced with the aid of spectroelectrochemical measurements and by identifying the distinctive signatures of electron-phonon scattering in picosecond-resolution transient absorption spectra. Ultrafast charge separation across the type-II interface of MoS₂/CdS heterostructures enables a high Faradaic efficiency of ∼99.4 ± 1.2% to be achieved in the hydrogen evolution reaction (HER) and provides a 40-fold increase in the photocatalytic activity of dispersed photocatalysts for H₂ generation. The accurate mapping of thermodynamic driving forces and dynamics of charge transfer in these heterostructures suggests a means of engineering ultrafast electron transfer and effective charge separation to design viable photocatalytic architectures.

PbS Quantum Dots Decorating TiO2 Nanocrystals: Synthesis, Topology, and Optical Properties of the Colloidal Hybrid Architecture

Fabrication of heterostructures by merging two or more materials in a single object. The domains at the nanoscale represent a viable strategy to purposely address materials’ properties for applications in several fields such as catalysis, biomedicine, and energy conversion. In this case, solution-phase seeded growth and the hot-injection method are ingeniously combined to fabricate TiO₂/PbS heterostructures. The interest in such hybrid nanostructures arises from their absorption properties that make them advantageous candidates as solar cell materials for more efficient solar light harvesting and improved light conversion. Due to the strong lattice mismatch between TiO₂ and PbS, the yield of the hybrid structure and the control over its properties are challenging. In this study, a systematic investigation of the heterostructure synthesis as a function of the experimental conditions (such as seeds’ surface chemistry, reaction temperature, and precursor concentration), its topology, structural properties, and optical properties are carried out. The morphological and chemical characterizations confirm the formation of small dots of PbS by decorating the oleylamine surface capped TiO₂ nanocrystals under temperature control. Remarkably, structural characterization points out that the formation of heterostructures is accompanied by modification of the crystallinity of the TiO₂ domain, which is mainly ascribed to lattice distortion. This result is also confirmed by photoluminescence spectroscopy, which shows intense emission in the visible range. This originated from self-trapped excitons, defects, and trap emissive states.

Predicted CsSi compound: a promising material for photovoltaic applications

Exploration of photovoltaic materials has received enormous interest for a wide range of both fundamental and applied research. Therefore, in this work, we identify a CsSi compound with a Zintl phase as a promising candidate for photovoltaic material by using a global structure prediction method. Electronic structure calculations indicate that this phase possesses a quasi-direct band gap of 1.45 eV, suggesting that its optical properties could be superior to those of diamond-Si for capturing sunlight from the visible to the ultraviolet range. In addition, a novel silicon allotrope is obtained by removing Cs atoms from this CsSi compound. The superconducting critical temperature (T_c) of this phase was estimated to be of 9 K in terms of a substantial density of states at the Fermi level. Our findings represent a new promising CsSi material for photovoltaic applications, as well as a potential precursor of a superconducting silicon allotrope.

Highly efficient charge transfer in CdS-covalent organic framework nanocomposites for stable photocatalytic hydrogen evolution under visible light

A facile and effective impregnation combined with photo-deposition approach was adopted to deposit cadmium sulfide (CdS) nanoparticles on CTF-1, a covalent triazine-based frameworks (CTFs). In this system, CTF-1 not only acted as supporter but also served as photocatalyst and electron donor. The performance of the obtained CdS deposited CTF-1 (CdS-CTF-1) nanocomposite was evaluated by H₂ evolution reaction under visible light irradiation. As a result, CdS-CTF-1 exhibited high H₂ production from water, far surpassing the CdS/CTF-1 nanocomposite, in which CdS was deposited via solvothermal method. The high activity of CdS-CTF-1 was attributed to the confined CdS nanoparticles with small size, leading to expose more active sites. In addition, time-resolved spectroscopy indicated that the superior performance of CdS-CTF-1 also can be ascribed to the fast electron transfer rate and injection efficiency (K_ET = 0.18 × 10⁹ s^-1, η_inj = 39.38%) between CdS and CTF-1 layers, which are 3.83 times faster and 4.84 times higher than that of CdS/CTF-1 nanocomposite. This work represents the first example on using covalent organic frameworks (COFs) as a support and electron-donor for fabricating novel CdS-COF nanocomposite system and its potential application in solar energy transformations.

Room-temperature solution-phase epitaxial nucleation of PbS quantum dots on rutile TiO2 (100)

Owing to its simplicity and versatility, the successive ionic layer adsorption and reaction (SILAR) method is increasingly being employed to develop low-cost hetero-nanostructured sensitized oxide systems for solar energy conversion, such as solar cells and solar fuels schemes. Understanding the nature of the SILAR quantum dot (QD) nucleation and growth on an insulating oxide is then critical as it will determine the QD density and spatial distribution, as well as the optoelectronic properties of the QD/oxide interfaces (e.g. QD bandgap onset). Here, we demonstrate epitaxial nucleation of lead sulfide (PbS) QDs onto a planar rutile titanium dioxide (100) surface employing the SILAR method. The QDs nucleated by SILAR are crystalline structures characterized by a truncated pyramidal shape, with nucleation occurring preferentially along the rutile (010) and (001) crystal orientations. The PbS QD size distribution is constrained by lattice mismatch causing strain in the lead sulfide. These results highlight the potential of SILAR for the facile growth of high-quality epitaxial nanostructures in liquid phase, under ambient conditions and at room temperature.

Metal Chalcogenides Based Heterojunctions and Novel Nanostructures for Photocatalytic Hydrogen Evolution

The photo-conversion efficiency is a key issue in the development of new photocatalysts for solar light driven water splitting applications. In recent years, different engineering strategies have been proposed to improve the photogeneration and the lifetime of charge carriers in nanostructured photocatalysts. In particular, the rational design of heterojunctions composites to obtain peculiar physico-chemical properties has achieved more efficient charge carriers formation and separation in comparison to their individual component materials. In this review, the recent progress of sulfide-based heterojunctions and novel nanostructures such as core-shell structure, periodical structure, and hollow cylinders is summarized. Some new perspectives of opportunities and challenges in fabricating high-performance photocatalysts are also discussed.

Wet-Chemical Synthesis and Applications of Semiconductor Nanomaterial-Based Epitaxial Heterostructures

Semiconductor nanomaterial-based epitaxial heterostructures with precisely controlled compositions and morphologies are of great importance for various applications in optoelectronics, thermoelectrics, and catalysis. Until now, various kinds of epitaxial heterostructures have been constructed. In this minireview, we will first introduce the synthesis of semiconductor nanomaterial-based epitaxial heterostructures by wet-chemical methods. Various architectures based on different kinds of seeds or templates are illustrated, and their growth mechanisms are discussed in detail. Then, the applications of epitaxial heterostructures in optoelectronics, catalysis, and thermoelectrics are described. Finally, we provide some challenges and personal perspectives for the future research directions of semiconductor nanomaterial-based epitaxial heterostructures.

Attaching titania clusters of various size to reduced graphene oxide and its impact on the conceivable photocatalytic behavior of the junctions-a DFT/D + U and TD DFTB modeling

DFT/D  +  U and density functional based tight binding (DFTB) molecular modeling was used to investigate the role of the structural, electronic and optical properties of reduced graphene oxide surface (r-GO), hybridized with hydrated TiO₂ moieties of various size, ranging from small molecular Ti₂O₄ clusters into extended Ti₄₃O₈₆ rutile type nanocrystals of ~5 nm diameter. The calculated adhesion energies, varying from  -5.048 eV (r-GO|Ti₂O₄), -12.159 eV (r-GO|Ti₅O₁₀), -18.499 eV (r-GO|Ti₁₅O₃₀) to  -42.484 eV (r-GO|Ti₄₃O₈₆), indicate high stability of these composites. It was shown that electronic interactions at the r-GO|(1 1 0)TiO₂ interface give rise to net charge flow from the r-GO substrate towards the TiO₂ moieties, analyzed in terms of the partial charge density 3D plots and an interfacial dipole moment formation. The DOS structure of the composites was calculated by means of the time dependent DFTB approach, and the position and composition of the VB and CB edges, along with the presence of weak mid-gap 2p  C states originating from the intact graphene-like patches in the r-GO substrate were discussed in detail in the context of conceivable photocatalytic activity of the composites. The constructed band alignment diagram implies formation of the staggered type II scheme, with the electric field offset that is sensitive to the titania cluster size. In the case of the nano-reticular TiO₂, where only a fraction of the Ti atoms is engaged in the Ti-O-C linkers formation, recombination of the photogenerated charges is inhibited owing to favorable spatial separation effect. For small molecular TiO₂ clusters with all Ti cations anchored to the r-GO layer fast cross-relaxation quenches the beneficial interfacial charge separation effect, since the strong hybridization of the oxygen and carbon states provides a convenient pathway for the efficient electronic coupling between the CB edge states of r-GO and the VB edge states of the TiO₂ moieties. A phenomenological model of the molecular r-GO|Ti₂O₄ and the reticular r-GO|Ti₄₃O₈₆ composites was constructed in account for different photocatalytic behavior of both junctions.

Semiconductor Quantum Dots: An Emerging Candidate for CO2 Photoreduction

As one of the most critical approaches to resolve the energy crisis and environmental concerns, carbon dioxide (CO₂ ) photoreduction into value-added chemicals and solar fuels (for example, CO, HCOOH, CH₃ OH, CH₄ ) has attracted more and more attention. In nature, photosynthetic organisms effectively convert CO₂ and H₂ O to carbohydrates and oxygen (O₂ ) using sunlight, which has inspired the development of low-cost, stable, and effective artificial photocatalysts for CO₂ photoreduction. Due to their low cost, facile synthesis, excellent light harvesting, multiple exciton generation, feasible charge-carrier regulation, and abundant surface sites, semiconductor quantum dots (QDs) have recently been identified as one of the most promising materials for establishing highly efficient artificial photosystems. Recent advances in CO₂ photoreduction using semiconductor QDs are highlighted. First, the unique photophysical and structural properties of semiconductor QDs, which enable their versatile applications in solar energy conversion, are analyzed. Recent applications of QDs in photocatalytic CO₂ reduction are then introduced in three categories: binary II-VI semiconductor QDs (e.g., CdSe, CdS, and ZnSe), ternary I-III-VI semiconductor QDs (e.g., CuInS₂ and CuAlS₂ ), and perovskite-type QDs (e.g., CsPbBr₃ , CH₃ NH₃ PbBr₃ , and Cs₂ AgBiBr₆ ). Finally, the challenges and prospects in solar CO₂ reduction with QDs in the future are discussed.

TiO2 and Au-TiO2 Nanomaterials for Rapid Photocatalytic Degradation of Antibiotic Residues in Aquaculture Wastewater

Antibiotic residues in aquaculture wastewater are considered as an emerging environmental problem, as they are not efficiently removed in wastewater treatment plants. To address this issue, we fabricated TiO₂ nanotube arrays (TNAs), TiO₂ nanowires on nanotube arrays (TNWs/TNAs), Au nanoparticle (NP)-decorated-TNAs, and TNWs/TNAs, which were applied for assessing the photocatalytic degradation of eight antibiotics, simultaneously. The TNAs and TNWs/TNAs were synthesized by anodization using an aqueous NH₄F/ethylene glycol solution. Au NPs were synthesized by chemical reduction method, and used to decorate on TNAs and TNWs/TNAs. All the TiO₂ nanostructures exhibited anatase phase and well-defined morphology. The photocatalytic performance of TNAs, TNWs/TNAs, Au-TNAs and Au-TNWs/TNAs was studied by monitoring the degradation of amoxicillin, ampicillin, doxycycline, oxytetracycline, lincomycin, vancomycin, sulfamethazine, and sulfamethoxazole under ultraviolet (UV)-visible (VIS), or VIS illumination by LC-MS/MS method. All the four kinds of nanomaterials degraded the antibiotics effectively and rapidly, in which most antibiotics were removed completely after 20 min treatment. The Au-TNWs/TNAs exhibited the highest photocatalytic activity in degradation of the eight antibiotics. For example, reaction rate constants of Au-TNWs/TNAs for degradation of lincomycin reached 0.26 min⁻¹ and 0.096 min⁻¹ under UV-VIS and VIS irradiation, respectively; and they were even higher for the other antibiotics. The excellent photocatalytic activity of Au-TNWs/TNAs was attributed to the synergistic effects of: (1) The larger surface area of TNWs/TNAs as compared to TNAs, and (2) surface plasmonic effect in Au NPs to enhance the visible light harvesting.

Emulsion and miniemulsion techniques in preparation of polymer nanoparticles with versatile characteristics

In recent years, polymer nanoparticles (PNPs) have found their ways into numerous applications extending from electronics to photonics, conducting materials to sensors and medicine to biotechnology. Physical properties and surface morphology of PNPs are the most important parameters that significantly affect on their exploitations and can be controlled through the synthesis process. Emulsion and miniemulsion techniques are among the most efficient and wide-spread methods for preparation of PNPs. The objective of this review is to present and highlight the recent developments in the advanced PNPs with specific properties that are produced through emulsion and miniemulsion processes.

The Middle Road Less Taken: Electronic-Structure-Inspired Design of Hybrid Photocatalytic Platforms for Solar Fuel Generation

The development of efficient solar energy conversion to augment other renewable energy approaches is one of the grand challenges of our time. Water splitting, or the disproportionation of H₂O into energy-dense fuels, H₂ and O₂, is undoubtedly a promising strategy. Solar water splitting involves the concerted transfer of four electrons and four protons, which requires the synergistic operation of solar light harvesting, charge separation, mass and charge transport, and redox catalysis processes. It is unlikely that individual materials can mediate the entire sequence of charge and mass transport as well as energy conversion processes necessary for photocatalytic water splitting. An alternative approach, emulating the functioning of photosynthetic systems, involves the utilization of hybrid systems wherein different components perform the various functions required for solar water splitting. The design of such hybrid systems requires the multiple components to operate in lockstep with optimal thermodynamic driving forces and interfacial charge transfer kinetics. This Account describes a new class of nanoscale heterostructures comprising M _xV₂O₅ nanowires, where M is a p-block cation with a ( n - 1) d¹⁰ ns² np⁰ electronic configuration characterized by a stereoactive lone pair of electrons and x is its stoichiometry, interfaced with II-VI semiconductor quantum dots (QDs). Photocatalytic water splitting involves the transfer of excited-state holes from QDs to mid-gap states (derived from the stereoactive lone pairs of p-block cations) of nanowires, hole transport through nanowires, the reduction of protons at a QD-immobilized catalyst, and water oxidation at an anode. The M _xV₂O₅/QD architectures provide a vast design space for evolutionary optimization of function with considerable tunability of composition and structure of the individual components as well as of the interfacial structure, thereby facilitating programmability of absorption spectra, energetic offsets, and charge-transfer reactivity. The available design space spans choice of the p-block cation M, its stoichiometry x, the composition and size of various QDs, and the nature of the nanowire/QD interface. This multivariate parameter space has been navigated by integrating first-principles modeling, diversified synthesis, spectroscopic measurements, and catalytic evaluation to facilitate the rational design of several generations of heterostructures and the systematic improvement of their photocatalytic performance. The electronic structures of the target heterostructures are predicted by DFT calculations in light of the revised lone pair model of stereoactive structural distortions and evaluated by hard X-ray photoelectron spectroscopy such as to systematically tune the interfacial band offsets. Central to this approach is the development of a topochemical "etch-a-sketch" intercalation approach that allows for facile installation of p-block cations in metastable polymorphs of V₂O₅. The interfacial charge transfer kinetics of M _xV₂O₅/QD heterostructures is further evaluated by transient absorption spectroscopy to measure excited-state charge-transfer dynamics and is found to depend sensitively on interfacial structure and the thermodynamic driving forces in accordance with Marcus theory. The integration of theory and experiment has allowed for the design of viable photocatalytic architectures exemplified by the exceptional catalytic performance of β-Pb _xV₂O₅/CdX (X= S, Se) architectures, which has subsequently been elaborated to other lone-pair M _xV₂O₅ compounds, demonstrating the effective exploitation of the opportunities for programmability available in the design space.

Rational Design of Photoelectrodes with Rapid Charge Transport for Photoelectrochemical Applications

Photoelectrode materials are the heart of photoelectrochemical (PEC) cells, which hold great promise to address global energy and environmental issues by converting solar energy into electricity or chemical fuels. In recent decades, significant research efforts have been devoted to the design and construction of photoelectrodes for the efficient generation and utilization of charge carriers to boost PEC performance. Herein, insights from a literature study on the relationship between the architecture and charge dynamics of photoelectrodes are presented. After briefly introducing the fundamental theories of charge dynamics in nanostructured photoelectrodes, the development of photoelectrode design in 1D polycrystalline nanotube arrays, 1D single-crystalline nanowire arrays, and hierarchical and mesoporous nanowire arrays is reviewed with a focus on the interplay between architecture and charge transport properties. For each design, commonly used synthetic approaches and the corresponding charge transport properties are discussed. Subsequently, the applications of these photoelectrodes in PEC systems are summarized. In conclusion, future challenges in the rational design of photoelectrode architecture are presented. The basic relationships between the architectures and charge dynamics of photoelectrode materials discussed here are expected to provide pertinent guidance and a reference for future advanced material design targeting improved light energy conversion systems.

Colloidal semiconductor nanocrystals in energy transfer reactions

Excitonic energy transfer is a versatile mechanism by which colloidal semiconductor nanocrystals can interact with a variety of nanoscale species. This feature article will discuss the latest research on the key scenarios under which semiconductor nanocrystals can engage in energy transfer with other nanoparticles, organic fluorophores, and plasmonic nanostructures, highlighting potential technological benefits to be gained from such processes.

Ultrafast carrier dynamics in 2D-2D hybrid structures of functionalized GO and CdSe nanoplatelets

Considerable attention has been paid to designing graphene based 2D hybrid nanostructures for their potential applications in various areas from healthcare to energy harvesting. Herein, we have prepared 2D-2D hybrid structures of 2D CdSe nanoplatelets (NPLs) with thiol (-SH) functionalized reduced graphene oxide (G-Ph-SH). Microscopic and spectroscopic studies reveal that the G-Ph-SH surface is successfully decorated by CdSe NPLs through a thiophenol (-SH) linker. The significant photoluminescence quenching (65%) and the shortening of decay time from 1 ns to 0.4 ns of CdSe NPLs are observed after adding 100 μg of G-Ph-SH. Furthermore, the femto-second transient absorption spectroscopic (fs-TAS) study reveals that the growth time of CdSe NPLs in the composite is reduced to 0.4 ps from 0.8 ps due to faster hot electron cooling. A faster component of 1.4 ps in the kinetic parameters of the composite system further suggests that the ultrafast electron transfer occurs from the conduction band of CdSe NPLs to surface functionalized reduced graphene oxide. This type of 2D-2D hybrid structure may open up new possibilities in light harvesting applications.

Synthesis of Au Nanoparticles Assisted by Linker-Modified TiO2 Nanoparticles

Plasmonic nanoparticles, especially gold ones, have been widely employed as photosensitizers in photoelectrovoltaic or photocatalytic systems. To improve the system's performance, a greater interaction of the nanoparticles with the semiconductor, generally TiO₂, is desired. Moreover, this performance is enhanced when an efficient covering of TiO₂ surface by the sensitizer is achieved. The Brust-Schiffrin-like methods are of the most employed approaches for nanoparticles synthesis. In a traditional approach, the reduction of the gold precursor is performed in the presence of a stabilizer (typically a thiol molecule) free in solution. A second step in which the obtained nanoparticles are anchored to the semiconductor surface is necessary in the case of photosensitive applications. Drawbacks like steric hindrance turn more difficult the covering of the semiconductor's surface by nanoparticles. In this paper, we report a variation of this methodology, where the linker is previously anchored to the TiO₂ nanoparticles surface. The resulting system is employed as the stabilizer in the gold reduction step. This strategy is carried out in aqueous media in two simple steps. A great covering of the titania surface by gold nanoparticles is achieved in all cases and the gold nanoparticles in the resulting nanoaggregate might be useful for photoelectrovoltaic or photocatalytic applications.

Controlled Synthesis of CuS/TiO2 Heterostructured Nanocomposites for Enhanced Photocatalytic Hydrogen Generation through Water Splitting

Photocatalytic hydrogen (H₂) generation through water splitting has attracted substantial attention as a clean and renewable energy generation process that has enormous potential in converting solar-to-chemical energy using suitable photocatalysts. The major bottleneck in the development of semiconductor-based photocatalysts lies in poor light absorption and fast recombination of photogenerated electron-hole pairs. Herein we report the synthesis of CuS/TiO₂ heterostructured nanocomposites with varied TiO₂ contents via simple hydrothermal and solution-based process. The morphology, crystal structure, composition, and optical properties of the as-synthesized CuS/TiO₂ hybrids are evaluated in detail. Controlling the CuS/TiO₂ ratio to an optimum value leads to the highest photocatalytic H₂ production rate of 1262 μmol h^-1 g^-1, which is 9.7 and 9.3 times higher than that of pristine TiO₂ nanospindles and CuS nanoflakes under irradiation, respectively. The enhancement in the H₂ evolution rate is attributed to increased light absorption and efficient charge separation with an optimum CuS coverage on TiO₂. The photoluminescence and photoelectrochemical measurements further confirm the efficient separation of charge carriers in the CuS/TiO₂ hybrid. The mechanism and synergistic role of CuS and TiO₂ semiconductors for enhanced photoactivity is further delineated.

CdSe-CdTe Heterojunction Nanorods: Role of CdTe Segment in Modulating the Charge Transfer Processes

Heterojunction nanorods having dissimilar semiconductors possess charge transfer (CT) properties and are proposed as active elements in optoelectronic systems. Herein, we describe the synthetic methodologies for controlling the charge carrier recombination dynamics in CdSe-CdTe heterojunction nanorods through the precise growth of CdTe segment from one of the tips of CdSe nanorods. The location of heterojunction was established through a point-by-point collection of the energy-dispersive X-ray spectra using scanning transmission electron microscopy. The possibilities of the growth of CdTe from both the tips of CdSe nanorods and the overcoating of CdTe over CdSe segment were also ruled out. The CT emission in the heterojunction nanorods originates through an interfacial excitonic recombination and was further tuned to the near-infrared region by varying the two parameters: the aspect ratio of CdSe and the length of CdTe segment. These aspects are evidenced from the emission lifetime and the femtosecond transient absorption studies.

Basal-Plane Ligand Functionalization on Semiconducting 2H-MoS2 Monolayers

Molybdenum disulfide (MoS₂) is a two-dimensional material promising for electronic, optical, and catalytic applications. To fully harness its potential, functionalization is essential to controlling its properties. However, MoS₂ functionalization has been mostly limited to either 1T-phase MoS₂ or the edges of 2H-phase MoS₂, and the chemistry of covalent functionalization on the basal plane of 2H-MoS₂ is poorly understood. Here, we report a facile approach to covalently functionalize chemical vapor deposition (CVD) grown 2H-MoS₂ monolayers (MLs), as well as mechanically exfoliated MoS₂, via thiol conjugation at sulfur vacancies on the basal plane. Thorough characterization confirmed the functionalization by thiol molecules on MoS₂ MLs, and we experimentally proved that sulfur vacancies in MoS₂ MLs play a key role in the functionalization of basal planes. By the controlling of the amount of sulfur vacancies via sulfur annealing, the degree of MoS₂ functionalization was effectively tuned. Because thiol conjugation partially repairs or passivates sulfur vacancies, enhanced photoluminescence response and decreased active sites for hydrogen evolution catalysis were observed for functionalized MoS₂. Moreover, such functionalization can be utilized for making MoS₂-based heterostructures, an example of which was demonstrated using a dithiol molecule to link MoS₂ layers and PbSe quantum dots. These results provide new understanding and insights on the surface chemistry of MoS₂ and open up more opportunities for MoS₂ MLs with well-controlled properties and broader applications.

Compound Copper Chalcogenide Nanocrystals

This review captures the synthesis, assembly, properties, and applications of copper chalcogenide NCs, which have achieved significant research interest in the last decade due to their compositional and structural versatility. The outstanding functional properties of these materials stems from the relationship between their band structure and defect concentration, including charge carrier concentration and electronic conductivity character, which consequently affects their optoelectronic, optical, and plasmonic properties. This, combined with several metastable crystal phases and stoichiometries and the low energy of formation of defects, makes the reproducible synthesis of these materials, with tunable parameters, remarkable. Further to this, the review captures the progress of the hierarchical assembly of these NCs, which bridges the link between their discrete and collective properties. Their ubiquitous application set has cross-cut energy conversion (photovoltaics, photocatalysis, thermoelectrics), energy storage (lithium-ion batteries, hydrogen generation), emissive materials (plasmonics, LEDs, biolabelling), sensors (electrochemical, biochemical), biomedical devices (magnetic resonance imaging, X-ray computer tomography), and medical therapies (photochemothermal therapies, immunotherapy, radiotherapy, and drug delivery). The confluence of advances in the synthesis, assembly, and application of these NCs in the past decade has the potential to significantly impact society, both economically and environmentally.

Strongly interactive 0D/2D hetero-structure of a ZnxCd1−xS nano-particle decorated phosphorene nano-sheet for enhanced visible-light photocatalytic H2 production

The coupling of few-layer phosphorene nano-sheets with Zn_xCd_1−xS nano-particles greatly improved the visible-light photocatalytic H₂-production activity.

Aminoalkanoic Acids as Alternatives to Mercaptoalkanoic Acids for the Linker-Assisted Attachment of Quantum Dots to TiO2

Linear aminoalkanoic acids (AAAs) and mercaptoalkanoic acids (MAAs) were characterized as bifunctional ligands to tether CdSe QDs to nanocrystalline TiO2 thin films and to mediate excited-state electron transfer (ET) from the QDs to TiO2 nanoparticles. The adsorption of 12-aminododecanoic acid (ADA) and 12-mercaptododecanoic acid (ADA) to TiO2 followed the Langmuir adsorption isotherm. Surface adduct formation constants (Kad) were ∼10(4) M(-1); saturation amounts of the ligands per projected surface area of TiO2 (Γ0) were ∼10(-7) mol cm(-2). Both Kad and Γ0 differed by 20% or less for the two linkers. CdSe QDs adhered to ADA- and MDA-functionalized TiO2 films; data were well modeled by the Langmuir adsorption isotherm and Langmuir kinetics. For ADA- and MDA-mediated assembly values of Kad were (1.8 ± 0.4) × 10(6) and (2.4 ± 0.4) × 10(6) M(-1), values of Γ0 were (1.6 ± 0.3) × 10(-9) and (1.2 ± 0.1) × 10(-9) mol cm(-2), and rate constants were (14 ± 5) and (60 ± 20) M(-1) s(-1), respectively. Thus, the thermodynamics and kinetics of linker-assisted assembly were slightly more favorable for MDA than for ADA. Steady-state and time-resolved emission spectroscopy revealed that electrons were transferred from both band-edge and surface states of CdSe QDs to TiO2 with rate constants (ket) of ∼10(7) s(-1). ET was approximately twice as fast through thiol-bearing linker 4-mercaptobutyric acid (MBA) as through amine-bearing linker 4-aminobutyric acid (ABA). Photoexcited QDs transferred holes to adsorbed MBA. In contrast, ABA did not scavenge photogenerated holes from CdSe QDs, which maximized the separation of charges following ET. Additionally, ABA shifted electron-trapping surface states to higher energies, minimizing the loss of potential energy of electrons prior to ET. These trade-offs involving the kinetics and thermodynamics of linker-assisted assembly; the driving force, rate constant, and efficiency of ET; and the extent of photoinduced charge separation can inform the selection bifunctional ligands to tether QDs to surfaces.

Biological synthesis of fluorescent nanoparticles by cadmium and tellurite resistant Antarctic bacteria: exploring novel natural nanofactories

Background

Fluorescent nanoparticles or quantum dots (QDs) have been intensely studied for basic and applied research due to their unique size-dependent properties. There is an increasing interest in developing ecofriendly methods to synthesize these nanoparticles since they improve biocompatibility and avoid the generation of toxic byproducts. The use of biological systems, particularly prokaryotes, has emerged as a promising alternative. Recent studies indicate that QDs biosynthesis is related to factors such as cellular redox status and antioxidant defenses. Based on this, the mixture of extreme conditions of Antarctica would allow the development of natural QDs producing bacteria.

Results

In this study we isolated and characterized cadmium and tellurite resistant Antarctic bacteria capable of synthesizing CdS and CdTe QDs when exposed to these oxidizing heavy metals. A time dependent change in fluorescence emission color, moving from green to red, was determined on bacterial cells exposed to metals. Biosynthesis was observed in cells grown at different temperatures and high metal concentrations. Electron microscopy analysis of treated cells revealed nanometric electron-dense elements and structures resembling membrane vesicles mostly associated to periplasmic space. Purified biosynthesized QDs displayed broad absorption and emission spectra characteristic of biogenic Cd nanoparticles.

Conclusions

Our work presents a novel and simple biological approach to produce QDs at room temperature by using heavy metal resistant Antarctic bacteria, highlighting the unique properties of these microorganisms as potent natural producers of nano-scale materials and promising candidates for bioremediation purposes.

An overview on emerging photoelectrochemical self-powered ultraviolet photodetectors

In recent years, as a new member of ultraviolet photodetectors (UV-PDs), photoelectrochemical UV-PDs (PEC UV-PDs) have received great attention. Compared to conventional photoconductors, PEC UV-PDs exhibit a number of merits, including low cost, environmentally friendly nature, being self-powered, and fast response. This tutorial review provides a comprehensive introduction to this research field, covering from the basics of performance evaluation of PEC UV-PDs, the state-of-the-art advances in structural design, electrolyte matching, and electrode fabrication of PEC UV-PDs, to the integration of multiple functions into a PEC UV-PD. In the end, we present our perspectives on the future development of PEC UV-PDs and highlight the key technical challenges in aiming to stimulate further developments in this research field.

Reduced recombination with an optimized barrier layer on TiO2 in PbS/CdS core shell quantum dot sensitized solar cells

A solar cell based on a double coating electrode (MgO/Al₂O₃) on TiO₂ yielded excellent performance with an efficiency (η) of 3.25%.

Enhanced photophysical properties of plasmonic magnetic metal-alloyed semiconductor heterostructure nanocrystals: a case study for the Ag@Ni/Zn1−xMgxO system

Multiple plasmonic magnetic Ag@Ni core–shell metal nanocrystal decorated Zn_1−xMg_xO nanoheterostructures have been synthesized and enhanced photophysical properties were found.

Enhanced photoelectrochemical performance of novel p-type MoBiCuSe4 thin films deposited by a simple surfactant-mediated solution route

Nanostructured MoBiCuSe₄ thin films with different morphologies deposited using different surfactants, such as PEG, SDS and TOPO, through a surfactant-mediated modified chemical route for PEC application.

Improving the performance of quantum dot sensitized solar cells through CdNiS quantum dots with reduced recombination and enhanced electron lifetime

Ni²⁺ doped CdS QDs in QDSSCs can suppress charge recombination, prolong the electron lifetime and improve the PCE of the cell.

Cobalt disulfide nanowires as an effective fluorescent sensing platform for DNA detection

Cobalt disulfide nanowires are synthesized in solution using a facile two-step hydrothermal method for the first time and applied as an effective sensing platform for nucleic acid detection.