Experimental and in silico insights: interaction of dimethyl sulphoxide with 1-hexyl-2-methyl imidazolium bromide/1-octyl-2-methyl imidazolium bromide at different temperatures

Ionic liquids have gained attention as 'designer solvents' since they offer a broad spectrum of properties that can be tuned by altering the constituent ions. In this work, 1-alkyl-2-methyl imidazolium-based ionic liquids with two different alkyl chains (alkyl = hexyl and octyl) have been synthesized and characterized. Since the binary mixture of ionic liquids with molecular solvents can give rise to striking physicochemical properties, the interaction of the synthesized room temperature ionic liquids, 1-hexyl-2-methyl imidazolium bromide [HMIM][Br]/1-octyl-2-methyl imidazolium bromide [OMIM][Br] with DMSO has been examined through density and specific conductance at T = (303.15, 308.15, 313.15 and 318.15) K under atmospheric pressure. The obtained molar volume and excess molar volume are fitted to the Redlich-Kister polynomial equation, and the standard deviation is noted. The positive excess molar volume at elevated temperatures indicates volume expansion due to the mutual loss of dipolar association and differences in the sizes and shapes of the constituent molecules. To have a better understanding of the reactivity and efficacy of 1-hexyl-2-methyl imidazolium bromide and 1-octyl-2-methyl imidazolium bromide with DMSO, the Becke, 3-parameter, Lee-Yang-Parr (B3LYP) correlation function of density functional theory (DFT) has been used. The ORCA Program version 4.0 calculates the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy. The effective reactivities of both the compounds that showed an energy band gap (ΔE), i.e., the difference between ELUMO and EHOMO, are 7.147 and 8.037 kcal mol-1.

Integrated electronic skin (e-skin) for harvesting of TENG energy through push-pull ionic electrets and ion-ion hopping mechanism

The development of highly durable, stretchable, and steady triboelectric nanogenerators (TENGs) is highly desirable to satisfy the tight requirement of energy demand. Here, we presented a novel integrated polymeric membrane that is designed by PEDOT: PSSa-naphthalene sulfonated polyimide (PPNSP)-EMI.BF₄ Electronic skin (e-skin) for potential TENG applications. The proposed TENG e-skin is fabricated by an interconnected architecture with push-pull ionic electrets that can threshold the transfer of charges through an ion-hopping mechanism for the generation of a higher output voltage (Voc) and currents (Jsc) against an electronegative PTFE film. PPNSP was synthesized from the condensation of naphthalene-tetracarboxylic dianhydride, 2,2'-benzidine sulfonic acid, and 4,4'diaminodiphenyl ether through an addition copolymerization protocol, and PEDOT: PSSa was subsequently deposited using the dip-coating method. Porous networked PPNSP e-skin with continuous ion transport nano-channels is synthesized by introducing simple and strong molecular push-pull interactions via intrinsic ions. In addition, EMI.BF₄ ionic liquid (IL) is doped inside the PPNSP skin to interexchange ions to enhance the potential window for higher output Voc and Iscs. In this article, we investigated the push-pull dynamic interactions between PPNSP-EMI.BF₄ e-skin and PTFE and tolerable output performance. The novel PPNSP- EMI.BF₄ e-skin TENG produced upto 49.1 V and 1.03 µA at 1 Hz, 74 V and 1.45 µA at 2 Hz, 122.3 V and 2.21 µA at 3 Hz and 171 V and 3.6 µA at 4 Hz, and 195 V and 4.43 µA at 5 Hz, respectively. The proposed novel TENG device was shown to be highly flexible, highly durable, commercially viable, and a prospective candidate to produce higher electrical charge outputs at various applied frequencies.

Recent advances in the 3D printing of ionic electroactive polymers and core ionomeric materials

The recent advances in the 3D printing, or additive manufacturing, of ionic electroactive polymers (EAP) and their future applications.

Flexo-Ionic Effect of Ionic Liquid Crystal Elastomers

The first study of the flexo-ionic effect, i.e., mechanical deformation-induced electric signal, of the recently discovered ionic liquid crystal elastomers (iLCEs) is reported. The measured flexo-ionic coefficients were found to strongly depend on the director alignment of the iLCE films and can be over 200 µC/m. This value is orders of magnitude higher than the flexo-electric coefficient found in insulating liquid crystals and is comparable to the well-developed ionic polymers (iEAPs). The shortest response times, i.e., the largest bandwidth of the flexo-ionic responses, is achieved in planar alignment, when the director is uniformly parallel to the substrates. These results render high potential for iLCE-based devices for applications in sensors and wearable micropower generators.

Design of Clickable Ionic Liquid Monomers to Enhance Ionic Conductivity for Main-Chain 1,2,3-Triazolium-Based Poly(Ionic Liquid)s

A series of clickable α-azide-ω-alkyne ionic liquid (IL) monomers with an ethylene oxide spacer were developed and applied to the synthesis of 1,2,3-triazolium-based poly(ionic liquid)s (TPILs) with high ionic conductivities via one-step thermal azide-alkyne cycloaddition click chemistry. Subsequently, the number of IL moieties in the resultant TPILs was further increased by N-alkylation of the 1,2,3-triazole-based backbones of the TPILs with a quarternizing reagent. This strategy affords the preparation of TPILs having either one or two 1,2,3-triazolium cations with bis(trifluoromethylsulfonyl)imide anions in a monomer unit. Synthesis of the TPILs was confirmed by 1H and 13C NMR spectroscopy and gel permeation chromatography. The effects of the length of the ethylene oxide spacer and the number of IL moieties in the IL monomer unit on the physicochemical properties of the TPILs were characterized by differential scanning calorimetry, thermogravimetric analysis, and impedance spectroscopy. The introduction of a longer ethylene oxide spacer or an increase in the number of IL moieties in the monomer unit resulted in TPILs with lower glass-transition temperatures and higher ionic conductivities. The highest ionic conductivity achieved in this study was 2.0 × 10-5 S cm-1 at 30 °C. These results suggest that the design of the IL monomer provides the resultant polymer with high chain flexibility and a high IL density, and so it is effective for preparing TPILs with high ionic conductivities.

100th Anniversary of Macromolecular Science Viewpoint: Block Copolymers with Tethered Acid Groups: Challenges and Opportunities

Scientific research on advanced polymer electrolytes has led to the emergence of all-solid-state energy storage/transfer systems. Early research began with acid-tethered polymers half a century ago, and research interest has gradually shifted to high-precision polymers with controllable acid functional groups and nanoscale morphologies. Consequently, various self-assembled acid-tethered block polymer morphologies have been produced. Their ion properties are profoundly affected by the multiscale intermolecular interactions in confinements. The creation of hierarchically organized ion/dipole arrangements inside the block copolymer nanostructures has been highlighted as a future method for developing advanced single-ion polymers with decoupled ion dynamics and polymer chain relaxation. Several emerging practical applications of the acid-tethered block copolymers have been explored to draw attention to the challenges and opportunities in developing state-of-the-art electrochemical systems.

Influence of Tethered Ions on Electric Polarization and Electrorheological Property of Polymerized Ionic Liquids

Polymerized ionic liquids (PILs) show potential to be used as new water-free polyelectrolyte-based electrorheological (ER) material. To direct ER material design at the molecular level, unveiling structure-property relationships is essential. While a few studies compare the mobile ions in PILs there is still a limited understanding of how the structure of tethered counterions on backbone influences ER property. In this study, three PILs with same mobile anions but different tethered countercations (e.g., poly(dimethyldiallylammonium) P[DADMA]⁺, poly(benzylethyl) trimethylammonium P[VBTMA]⁺, and poly(1-ethyl-4-vinylimidazolium hexafluorophosphate) P[C₂VIm]⁺) are prepared and the influence of tethered countercations on the ER property of PILs is investigated. It shows that among these PILs, P[DADMA]⁺ PILs have the strongest ER property and P[C₂VIm]⁺ PILs have the weakest one. By combining dielectric spectra analysis with DFT calculation and activation energy measurement, it can clarify that the influence of tethered counterions on ER property is mainly associated with ion-pair interaction energy that is affecting ionic conductivity and interfacial polarization induced by ion motion. P[DADMA]⁺ has the smallest ion-pair interaction energy with mobile ions, which can result in the highest ionic conductivity and the fastest interfacial polarization rate for its strongest ER property.

Hydrazine-Enabled One-Step Synthesis of Metal Nanoparticle-Functionalized Gradient Porous Poly(ionic liquid) Membranes

In this communication, a one-step synthetic route is reported toward free-standing metal-nanoparticle-functionalized gradient porous polyelectrolyte membranes (PPMs). The membranes are produced by soaking a glass-plate-supported blend film that consists of a hydrophobic poly(ionic liquid) (PIL), poly(acrylic acid), and a metal salt, into an aqueous hydrazine solution. Upon diffusion of water and hydrazine molecules into the blend film, a phase separation process of the hydrophobic PIL and an ionic crosslinking reaction via interpolyelectrolyte complexation occur side by side to form the PPM. Simultaneously, due to the reductive nature of hydrazine, the metal salt inside the polymer blend film is reduced in situ by hydrazine into metal nanoparticles that anchor onto the PPM. The as-obtained hybrid porous membrane is proven functional in the catalytic reduction of p-nitrophenol. This one-step method to grow metal nanoparticles and gradient porous membranes can simplify future fabrication processes of multifunctional PPMs.

Nonmonotonic Influence of Size of Quaternary Ammonium Countercations on Micromorphology, Polarization, and Electroresponse of Anionic Poly(ionic liquid)s

The size influence of quaternary ammonium countercations in poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide][tetraalkylammonium] (P[STFSI][Nnnnn], n = 1, 2, and 3) poly(ionic liquid)s on dielectric polarization and the stimuli-responsive electrorheological effect is investigated by dielectric spectroscopy and rheology, and the microstructure-level understanding behind the influence is analyzed by Raman and X-ray scattering spectra. The size influence of quaternary ammonium cations is found to be nonmonotonic. The largest electrorheological effect accompanied by best polarization properties is demonstrated in P[STFSI][N2222]. Raman spectra and activation energy measurements demonstrate that the nonmonotonic influence originates from the fact that, compared to small N1111⁺ and large N3333⁺, intermediate N2222⁺ as countercations can contribute a higher mobile ion number and lower activation energy barrier of ion dissociation and motion. But the experimental values of activation energy are not consistent with theoretically calculated values by considering the ion pair electrostatic potential and elastic force contribution of the matrix. By X-ray scattering and diffraction characterizations, it is clarified that the nonmonotonic influence and the inconsistency of activation energy originate from the size influence of Nnnnn⁺ on the micromorphology of P[STFSI][Nnnnn]. Compared to the semicrystalline structure of P[STFSI][N1111] and the ionic aggregation structure of P[STFSI][N3333], the relatively uniform amorphous structure of P[STFSI][N2222] may be responsible for its lower activation energy barrier of ion motion. This study further provides insights into the design and preparation of future poly(ionic liquid)-based electrorheological materials by considering not only molecular structure but also micromorphology.

Poly(ethylene glycol) Diacrylate Based Electro-Active Ionic Elastomer

Preparation and low voltage induced bending (converse flexoelectricity) of crosslinked poly(ethylene glycol) diacrylate (PEGDA), modified with thiosiloxane (TS) and ionic liquid (1-hexyl-3-methylimidazolium hexafluorophosphate) (IL) are reported. In between 2µm PEDOT:PSS electrodes at 1 V, it provides durable (95% retention under 5000 cycles) and relatively fast (2 s switching time) actuation with the second largest strain observed so far in ionic electro-active polymers (iEAPs). In between 40 nm gold electrodes under 8 V DC voltage, the film can be completely curled up (270° bending angle) with 6% strain that, to the best of the knowledge, is unpreceded among iEAPs. These results render great potential for the TS/PEGDA/IL based electro-active actuators for soft robotic applications.

Comparison of poly(ethylene glycol)-based networks obtained by cationic ring opening polymerization of neutral and 1,2,3-triazolium diepoxy monomers

The properties of two cross-linked epoxy networks obtained by ring opening polymerization of a synthetic diepoxy 1,2,3-triazolium and a commercial poly(ethylene glycol)diglycidyl ether using benzylamine trifluoroborate as cationic initiator are compared.

Poly(ionic liquid) composites

This review highlights recent advances in the development of poly(ionic liquid)-based composites for diverse materials applications.

N-Heterocyclic Carbenes in Materials Chemistry

N-Heterocyclic carbenes (NHCs) have become one of the most widely studied class of ligands in molecular chemistry and have found applications in fields as varied as catalysis, the stabilization of reactive molecular fragments, and biochemistry. More recently, NHCs have found applications in materials chemistry and have allowed for the functionalization of surfaces, polymers, nanoparticles, and discrete, well-defined clusters. In this review, we provide an in-depth look at recent advances in the use of NHCs for the development of functional materials.

Electroactive Artificial Muscles Based on Functionally Antagonistic Core-Shell Polymer Electrolyte Derived from PS-b-PSS Block Copolymer

Electroactive ionic soft actuators, a type of artificial muscles containing a polymer electrolyte membrane sandwiched between two electrodes, have been intensively investigated owing to their potential applications to bioinspired soft robotics, wearable electronics, and active biomedical devices. However, the design and synthesis of an efficient polymer electrolyte suitable for ion migration have been major challenges in developing high-performance ionic soft actuators. Herein, a highly bendable ionic soft actuator based on an unprecedented block copolymer is reported, i.e., polystyrene-b-poly(1-ethyl-3-methylimidazolium-4-styrenesulfonate) (PS-b-PSS-EMIm), with a functionally antagonistic core-shell architecture that is specifically designed as an ionic exchangeable polymer electrolyte. The corresponding actuator shows exceptionally good actuation performance, with a high displacement of 8.22 mm at an ultralow voltage of 0.5 V, a fast rise time of 5 s, and excellent durability over 14 000 cycles. It is envisaged that the development of this high-performance ionic soft actuator could contribute to the progress toward the realization of the aforementioned applications. Furthermore, the procedure described herein can also be applied for developing novel polymer electrolytes related to solid-state lithium batteries and fuel cells.

Enhancing Electroresponsive Electrorheological Effect and Temperature Dependence of Poly(ionic liquid) Particles by Hard Core Confinement

Monodisperse core-shell-structured SiO₂@poly(ionic liquid) (SiO₂@PIL) particles are prepared by the polymerization of ionic liquid monomer on the surface of methacryloxypropyltrimethoxysilane-modified SiO₂ particles. The electroresponsive electrorheological (ER) effect of SiO₂@PIL particles when dispersed in insulating carrier liquid is investigated and compared with that of pure poly(ionic liquid) (PIL) particles based on temperature-modulated rheology under electric fields. It is demonstrated that hard SiO₂ core not only enhances the ER effect of PIL particles but also improves the temperature dependence of ER effect. By dielectric spectroscopy analysis, the mechanism behind the property enhancement was discussed. It indicates that the hard SiO₂ core can not only increase the interfacial polarization strength of SiO₂@PIL particles by core-shell architecture but also restrain the segment relaxation or softening of the PIL shell and influence the ion dynamics above the calorimetric glass transition of PILs by the so called "substrate confinement effect", and this should be responsible for the enhanced electroresponsive ER effect and temperature stability of the SiO₂@PIL particles.

Low-Temperature Interfacial Polymerization and Enhanced Electro-Responsive Characteristic of Poly(ionic liquid)s@polyaniline Core-shell Microspheres

The synthesis of monodisperse poly(ionic liquid)s (PILs) microspheres coated with semiconducting polyaniline (PANI) shell is reported, which shows enhanced electro-responsive electrorheological (ER) effect but decreased power consumption compared to neat PIL microspheres. The monodisperse PIL microspheres are first prepared via dispersion polymerization and then PANI is coated via low-temperature interfacial polymerization of aniline on the surface of hydrophobic PIL microspheres without additional modification. The stimulus-responsive ER effect of the core-shell microspheres when dispersing in insulating oil are investigated under electric fields. The power-law of yield stress versus electric field strength and the dielectric relaxation spectroscopy are analyzed to understand the ER effect and the origin of property enhancement. It demonstrates that the semiconducting PANI shell can well limit the irreversible ion leakage of PIL microspheres and improve the particle polarizability, resulting in decreased power consumption but enhanced electro-responsive ER effect.

Low-voltage-driven soft actuators

Soft actuators based on electroactive polymers (EAPs) are the core constituents of future soft robots owing to their fascinating properties such as lightweight, compactness, easy fabrication into various forms, and low cost. Ionic EAP actuators are particularly attractive owing to the low driving voltages (<3 V) as compared to those of electronic EAP actuators (usually kilovolts). This paper presents a brief overview of the recent progress in a range of EAP actuators by focusing on low voltage operation, in addition to the challenges and future strategies for their wide applicability in artificial muscles and various innovative soft robot technologies.

Stimuli Responsive Smart Fluids Based on Ionic Liquids and Poly(ionic liquid)s

Owing to their robust and tunable properties compared to molecular compounds, ionic liquids and their high molecular weight counterparts, polymeric ionic liquids, have provided suitable compounds for the development of smart materials with high physical and chemical stability and strongly stimulus-responsive characteristics. By functionalizing ionic liquids themselves or incorporating ionic liquids into traditional materials, many new kinds of stimuli-responsive materials have been developed. In this chapter, we specifically focus on the recent advances in electro-responsive electrorheological smart fluids with ionic liquids and polymeric ionic liquids as either active components or additives. The goal is to highlight the potential of incorporating ionic liquids into traditional electrorheological materials and using polymeric ionic liquids as new electrorheological active materials to overcome the problems of present electrorheological fluids for real applications.

Electroactive Ionic Soft Actuators with Monolithically Integrated Gold Nanocomposite Electrodes

Electroactive ionic gel/metal nanocomposites are produced by implanting supersonically accelerated neutral gold nanoparticles into a novel chemically crosslinked ion conductive soft polymer. The ionic gel consists of chemically crosslinked poly(acrylic acid) and polyacrylonitrile networks, blended with halloysite nanoclays and imidazolium-based ionic liquid. The material exhibits mechanical properties similar to that of elastomers (Young's modulus ≈ 0.35 MPa) together with high ionic conductivity. The fabrication of thin (≈100 nm thick) nanostructured compliant electrodes by means of supersonic cluster beam implantation (SCBI) does not significantly alter the mechanical properties of the soft polymer and provides controlled electrical properties and large surface area for ions storage. SCBI is cost effective and suitable for the scaleup manufacturing of electroactive soft actuators. This study reports the high-strain electromechanical actuation performance of the novel ionic gel/metal nanocomposites in a low-voltage regime (from 0.1 to 5 V), with long-term stability up to 76 000 cycles with no electrode delamination or deterioration. The observed behavior is due to both the intrinsic features of the ionic gel (elasticity and ionic transport capability) and the electrical and morphological features of the electrodes, providing low specific resistance (<100 Ω cm^-2 ), high electrochemical capacitance (≈mF g^-1 ), and minimal mechanical stress at the polymer/metal composite interface upon deformation.

Poly(ionic liquid)-based polyurethanes having imidazolium, ammonium, morpholinium or pyrrolidinium cations

The synthesis of cationic polyelectrolytes based on condensation-derived backbone is rarely performed due to the difficulty obtaining of the respective ionic monomers in high purity. Despite such an approach is favorable as it results in ionic polymers with well-defined chemical structure and ionic group distribution. In this work two efficient methods are presented for the synthesis of ionic diols in high purity, namely the technique with pyranyl protection of OH-groups and the direct quaternization of tertiary amine alcohols. Applying these methods five novel ionic diols bearing various cations, namely, 1,1-bis(2-hydroxyethyl)pyrrolidin-1-ium bromide, 4,4-bis(2-hydroxyethyl)morpholin-4-ium bromide, N, N-bis(2-hydroxyethyl)-N-methylethanammonium, 1,1′-(pentane-1,5-diyl)bis(1-(2-hydroxyethyl)pyrrolidin-1-ium) dibromide, and 3-(2-hydroxyethyl)-1-(5-(3-(3-hydroxypropyl)-1H-imidazol-3-ium-1-yl)pentyl)-1H-imidazol-3-ium dibromide, were synthesized in high purity and high yields. The tin(II) mediated solution polycondensation of ionic diols with commercial hexamethylene diisocyanate or 4,4′-methylenebis(cyclohexyl isocyanate) resulted in a series of ionic, high molecular weight ( Mw = 2.3 × 104 −8.0 × 104) polyurethanes (PUs). The influence of various reaction parameters including reaction temperature and time, catalyst concentration and solvent nature upon PUs molecular weight was investigated. After the exchange of bromide to (CF3SO2)2N- anion the obtained poly(ionic liquid)s exhibit high thermal stability with onset mass loss above 225°C and demonstrate glass transition temperatures in the wide range from −22°C to 76°C depending on the nature of ionic diol used. Ionic PUs present excellent solubility in most organic solvents and are capable to form tough, flexible films with tensile strength up to 29.7 MPa.

A review of the structure and dynamics of nanoconfined water and ionic liquids via molecular dynamics simulation

During the past decade, the research on fluids in nanoconfined geometries has received considerable attention as a consequence of their wide applications in different fields. Several nanoconfined systems such as water and ionic liquids, together with an equally impressive array of nanoconfining media such as carbon nanotube, graphene and graphene oxide have received increasingly growing interest in the past years. Water is the first system that has been reviewed in this article, due to its important role in transport phenomena in environmental sciences. Water is often considered as a highly nanoconfined system, due to its reduction to a few layers of water molecules between the extended surface of large macromolecules. The second system discussed here is ionic liquids, which have been widely studied in the modern green chemistry movement. Considering the great importance of ionic liquids in industry, and also their oil/water counterpart, nanoconfined ionic liquid system has become an important area of research with many fascinating applications. Furthermore, the method of molecular dynamics simulation is one of the major tools in the theoretical study of water and ionic liquids in nanoconfinement, which increasingly has been joined with experimental procedures. In this way, the choice of water and ionic liquids in nanoconfinement is justified by applying molecular dynamics simulation approaches in this review article.

One-volt-driven superfast polymer actuators based on single-ion conductors

The key challenges in the advancement of actuator technologies related to artificial muscles include fast-response time, low operation voltages and durability. Although several researchers have tackled these challenges over the last few decades, no breakthrough has been made. Here we describe a platform for the development of soft actuators that moves a few millimetres under 1 V in air, with a superfast response time of tens of milliseconds. An essential component of this actuator is the single-ion-conducting polymers that contain well-defined ionic domains through the introduction of zwitterions; this achieved an exceptionally high dielectric constant of 76 and a 300-fold enhancement in ionic conductivity. Moreover, the actuator demonstrated long-term durability, with negligible changes in the actuator stroke over 20,000 cycles in air. Owing to its low-power consumption (only 4 mW), we believe that this actuator could pave the way for cutting-edge biomimetic technologies in the future.

Achieving a balance of desirable mechanical properties with low power consumption is important for developing soft actuator technologies. Here, the authors report single-ion-conducting polymers that function as fast, durable actuators at low voltages.

Imidazolium-Containing ABA Triblock Copolymers as Electroactive Devices

Two-step reversible addition-fragmentation chain transfer (RAFT) polymerization and two subsequent postpolymerization modification steps afforded well-defined ABA triblock copolymers featuring mechanically reinforcing polystyrene outer blocks and 1-methylimidazole-neutralized poly(acrylic acid)-based central blocks. Size exclusion chromatography and (1)H NMR spectroscopy confirmed predictable molecular weights and narrow distributions. The ionic liquid (IL) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIm][OTf]) was incorporated at 30 wt % into polymeric films. Thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis determined the thermomechanical properties of the polymers and polymer-IL composites. Atomic force microscopy, small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM) determined surface and bulk morphologies, and poly(Sty-b-AA(MeIm)-b-Sty) exhibited a change from packed cylindrical to lamellar morphology in SAXS upon IL incorporation. Electrochemical impedance spectroscopy determined the in-plane ionic conductivities of the polymer-IL membranes (σ ∼ 10(-4) S/cm). A device fabricated from poly(Sty-b-AA(MeIm)-b-Sty) with 30 wt % incorporated IL demonstrated mechanical actuation under a low applied voltage of 4 V.

Phosphonium-containing diblock copolymers from living anionic polymerization of 4-diphenylphosphino styrene

Living anionic polymerization of 4-diphenylphosphino styrene (DPPS) achieved well-defined homopolymers, poly(DPPS-b-S) styrenic block copolymers, and poly(I-b-DPPS) diene-based diblock copolymers with predictable molecular weights and narrow polydispersities. In situ FTIR spectroscopy monitored the anionic polymerization of DPPS and tracked monomer consumption for kinetic analysis. Post-alkylation enabled controlled placement of phosphonium functionality in poly(I-b-DPPS) diblock copolymers, producing well-defined phosphonium-containing block copolymers with low degrees of compositional heterogeneity. Incorporating phosphonium charge disrupted the lamellar bulk morphology of the neutral diblock precursor and provided morphologies with interdigitated packing of alkyl chains on the phosphonium cation.

Poly(ionic liquid)s with controlled architectures and their use in the making of ionogels with high conductivity and tunable rheological properties

We describe the preparation as well as the electrochemical and mechanical properties of a series of novel well-defined poly(ionic liquids) (PILs) featuring a finely tuned cross-linking ratio.

Solvent controlled ion association in structured copolymers: Molecular dynamics simulations in dilute solutions

Tailoring the nature of individual segments within ion containing block co-polymers is one critical design tool to achieve desired properties. The local structure including the size and distribution of the ionic blocks, as well as the long range correlations, are crucial for their transport ability. Here, we present molecular dynamics simulations on the effects of varying the concentrations of the ionizable groups on the conformations of pentablock ionomer that consist of a center block of ionic sulfonated styrene tethered to polyethylene and terminated by a bulky substituted styrene in dilute solutions. Sulfonation fractions f (0 ≤ f ≤ 0.55), spanning the range from ionomer to polyelectrolytes, were studied. Results for the equilibrium conformation of the chains in water and a 1:1 mixture of cyclohexane and heptane are compared to that in implicit poor solvents with dielectric constants ε = 1.0 and 77.73. In water, the pentablock collapses with the sulfonated groups on the outer surface. As f increases, the ionic, center block increasingly segregates from the hydrophobic regions. In the 1:1 mixture of cyclohexane and heptane, the flexible blocks swell, while the center ionic block collapses for f > 0. For f = 0, all blocks swell. In both implicit poor solvents, the pentablock collapses into a nearly spherical shape for all f. The sodium counterions disperse widely throughout the simulation cell for both water and ε = 77.73, whereas for ε = 1.0 and mixture of cyclohexane and heptane, the counterions largely condense onto the collapsed pentablock.

The evolution of cyclopropenium ions into functional polyelectrolytes

Versatile polyelectrolytes with tunable physical properties have the potential to be transformative in applications such as energy storage, fuel cells and various electronic devices. Among the types of materials available for these applications, nanostructured cationic block copolyelectrolytes offer mechanical integrity and well-defined conducting paths for ionic transport. To date, most cationic polyelectrolytes bear charge formally localized on heteroatoms and lack broad modularity to tune their physical properties. To overcome these challenges, we describe herein the development of a new class of functional polyelectrolytes based on the aromatic cyclopropenium ion. We demonstrate the facile synthesis of a series of polymers and nanoparticles based on monomeric cyclopropenium building blocks incorporating various functional groups that affect physical properties. The materials exhibit high ionic conductivity and thermal stability due to the nature of the cationic moieties, thus rendering this class of new materials as an attractive alternative to develop ion-conducting membranes.

Direct Route to Well-Defined Poly(ionic liquid)s by Controlled Radical Polymerization in Water

The precision synthesis of poly(ionic liquid)s (PILs) in water is achieved for the first time by the cobalt-mediated radical polymerization (CMRP) of N-vinyl-3-alkylimidazolium-type monomers following two distinct protocols. The first involves the CMRP of various 1-vinyl-3-alkylimidazolium bromides conducted in water in the presence of an alkyl-cobalt(III) complex acting as a monocomponent initiator and mediating agent. Excellent control over molar mass and dispersity is achieved at 30 °C. Polymerizations are complete in a few hours, and PIL chain-end fidelity is demonstrated up to high monomer conversions. The second route uses the commercially available bis(acetylacetonato)cobalt(II) (Co(acac)₂) in conjunction with a simple hydroperoxide initiator (tert-butyl hydroperoxide) at 30, 40, and 50 °C in water, facilitating the scaling-up of the technology. Both routes prove robust and straightforward, opening new perspectives onto the tailored synthesis of PILs under mild experimental conditions in water.

Novel nanofiltration membranes consisting of a sulfonated pentablock copolymer rejection layer for heavy metal removal

Facing stringent regulations on wastewater discharge containing heavy metal ions, various industries are demanding more efficient and effective treatment methods. Among the methods available, nanofiltration (NF) is a feasible and promising option. However, the development of new membrane materials is constantly required for the advancement of this technology. This is a report of the first attempt to develop a composite NF membrane comprising a molecularly designed pentablock copolymer selective layer for the removal of heavy metal ions. The resultant NF membrane has a mean effective pore diameter of 0.50 nm, a molecular weight cutoff of 255 Da, and a reasonably high pure water permeability (A) of 2.4 LMH/bar. The newly developed NF membrane can effectively remove heavy metal cations such as Pb(2+), Cd(2+), Zn(2+), and Ni(2+) with a rejection of >98.0%. On the other hand, the membrane also shows reasonably high rejections toward anions such as HAsO4(2-) (99.9%) and HCrO4(-) (92.3%). This performance can be attributed to (1) the pentablock copolymer's unique ability to form a continuous water transport passageway with a defined pore size and (2) the incorporation of polyethylenimine as a gutter layer between the selective layer and the substrate. To the best of our knowledge, this is the first reported NF membrane comprising this pentablock copolymer as the selective material. The promising preliminary results achieved in this study provide a useful platform for the development of new NF membranes for heavy metal removal.