Exploring the potential of surface-modified alginate beads for catalytic removal of environmental pollutants and hydrogen gas generation

In this study, hydrogel beads were fabricated using alginate (Algt) polymer containing dispersed nickel phthalocyanine (NTC) nanomaterial. The viscous solution of Algt and NTC was poured dropwise into a divalent Ca2+ ions, resulting in the formation of hydrogel beads known as NTC@Algt-BDs. The surface of the NTC@Algt-BDs was further modified by coating them with different types of metal ions, yielding metal-coated M+/NTC@Algt-BDs. The adsorbed metal ions i.e., Cu+2, Ag+, Ni+2, Co+2, and Fe+3 were subsequently reduced to zero-valent metal nanoparticles (M0) by NaBH4. The prepared beads were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Initially, M0/NTC@Algt-BDs were examined for the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). Among them, Cu0/NTC@Algt-BDs catalyst exhibited the highest reduction rate and therefore, investigated for reduction of different nitrophenols (NPs) and dyes, including 2-nitrophenol (2-NP), 2,6-dinitrophenol (2,6-DNP), methyl orange (MO), potassium ferrocyanide (PFC), congo red (CR), and acridine orange (ArO). The highest reduction rates of 2.019 and 1.394 min-1 were observed for MO and 2-NP, respectively. Furthermore, the fabricated catalysts were employed for the efficient production of H2 gas by NaBH4 methanolysis. Among which the Ag0/NTC@Algt-BDs catalyst showed excellent catalytic production of H2 gas, exhibiting the lowest activation energy (Ea) of 25.169 kJ/mol at ambient temperature. Furthermore, the impact of NaBH4 amount, and catalyst dosage on the reduction of 2-NP and H2 gas production was conducted whereas the effect of temperature on methanolysis of NaBH4 for evolution of H2 gas was studied. The amount of H2 gas was confirmed by GC-TCD system. Additionally, the recyclability of the catalyst was investigated, as it garnered significant research interest.

Polydopamine/chitosan hydrogels-functionalized polyurethane foams in situ decorated with silver nanoparticles for water disinfection

A new facile route to decorate polyurethane foams (PUF) with dense and uniform silver nanoparticles (AgNPs) to ensure efficient and long-term water disinfection is proposed. The antibacterial sponge was fabricated by sequential treatment with chitosan hydrogels grafting, polydopamine (PDA) coating, and finally in situ growth of AgNPs on the surface of substrate. The morphologies, chemical composition, crystalline nature, mechanical property, and swelling capacity of the composite were characterized. Its silver release behavior and bactericidal performances against Escherichia coli (E. coli) were evaluated. Results show that the composite demonstrated higher mechanical strength (compression strength, 51.34 kPa) and a rapid swelling rate with an equilibrium swelling ratio of 18.2 g/g. It possessed a higher loading amount of AgNPs (35.87 mg/g) than that of PUF@Ag (8.21 mg/g) and restricted the cumulative silver release of below 0.05% after 24-h immersion in water. Besides, it presented efficient bactericidal activity with complete reduction of E. coli with 10 min of contact time. The strong bactericidal action was probably governed by strengthening the contact between AgNPs immobilized on the substrate and bacteria cells. Furthermore, the composite demonstrated exceptional reusability for five cycles and exhibited a superior processing capacity in the flow test. Finally, the composite could effectively disinfect the natural water sample like a river in 30 min under real conditions.

Calcium alginate gels-functionalized polyurethane foam decorated with silver nanoparticles as an antibacterial agent for point-of-use water disinfection

This paper reports the preparation of calcium alginate gels-functionalized PUF decorated with AgNPs (CA/PUF@Ag) by in situ reduction of Ag⁺ ions to form AgNPs with weakly reducing glycerol in CA/PUF composite. The water-adsorbing capacity, chemical structure, crystalline nature, elemental composition and morphologies of the composite were characterized. The Ag release behavior of CA/PUF@Ag was investigated. The inhibition zone test, time-dependent co-culture assay, test tube test, and antibacterial filtration experiment with Escherichia coli as an indicator of bacterial contamination were conducted to explore the antimicrobial efficacy. Results indicated that the CA/PUF@Ag prepared at 0.25 % w/v of SA could absorb more water with a higher swelling ratio of 8.0 g/g than that of PUF@Ag (6.0 g/g), which was subsequently squeezed by minimal pressure stimuli. The CA/PUF@Ag had a larger initial AgNPs loading amount (8.48 mg/g), lower Ag release concentration (44.35 μg/L) and lower Ag release rate (0.27 %) after 14 days tests than those of PUF@Ag (7.93 mg/g, 80.87 μg/L and 0.60 % respectively). The CA/PUF@Ag was highly reusable because bacterial cells in the squeezed water recovered from the composite were completely inactivated over five cycles of operation, and exhibited good antibacterial efficacy as an antibacterial filter in a flow test.

Facile Construction of Iron/Nickel Phosphide Nanocrystals Anchored on N-B-Doped Carbon-Based Composites with Advanced Catalytic Capacity for 4-Nitrophenol and Methylene Blue

The search for a simple and effective method to remove organic dyes and color intermediates that threaten human safety from the water environment is urgent. Herein, we report a simple method for constructing iron/nickel phosphide nanocrystals anchored on N-B-doped carbon-based composites, using steam-exploded poplar (SEP) and graphene oxide (GO) as a carrier. The stability and catalytic activity of N-B-Ni_xFe_yP/SEP and GO were achieved by thermal conversion in a N₂ atmosphere and modifying the Fe/Ni ratio in gel precursors. N-B-Ni₇Fe₃P/SEP was employed for the catalytic hydrogenation of 4-nitrophenol (4-NP) and methylene blue (MB), using sodium borohydride in aqueous media at room temperature. This showed much better catalytic performances in terms of reaction rate constant (0.016 S⁻¹ and 0.041 S⁻¹, respectively) and the activity factor, K (1.6 S⁻¹·g⁻¹ and 8.2 S⁻¹·g⁻¹, respectively) compared to the GO carrier (0.0053 S⁻¹ and 0.035 S⁻¹ for 4-NP and MB, respectively). The strong interaction between the carrier’s morphology and structure, and the vertically grown bimetallic phosphide nanoclusters on its surface, enhances charge transfer, electron transfer kinetics at the interface and Ni-Fe phosphide dispersion on the nanoclusters, and prevents dissolution of the nanoparticles during catalysis, thereby improving stability and achieving catalysis durability. These findings provide a green and simple route to efficient catalyst preparation and provide guidance for the rational selection of catalyst carriers.

Two-dimensional MXene enabled carbon quantum dots@Ag with enhanced catalytic activity towards the reduction of p-nitrophenol

A composite of cuttlefish ink-based carbon quantum dots@Ag/MXene (CQD@Ag/MXene) was firstly synthesized by solvothermal method as a catalyst for reduction of p-nitrophenol (PNP) to p-aminophenol (PAP). CQD@Ag/MXene was characterized by scanning electron microscopy (SEM), field emission transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman. The results show that loading on 2D material MXene can prevent the aggregation of CQD@Ag and expose more active sites, which contributes to a superior catalytic activity with a pseudo-first-order rate constant k (2.28 × 10-2 s-1) and mass-normalized rate constant k m (5700 s-1 g-1), nearly 2 times higher than CQD@Ag without MXene (k = 1.09 × 10-2 s-1 and k m = 2725 s-1 g-1). Besides, CQD@Ag/MXene showed excellent reusability which even retained about 65% activity in successive 10 cycles. The high adsorption rate to PNP and the promotion of forming H radicals may be the reason for the outstanding catalytic activity of CQD@Ag/MXene. CQD@Ag/MXene can be a potential candidate in the removal of environmental pollutants due to its facile synthesis and high catalytic efficiency.

Sustainable Removal of Contaminants by Biopolymers: A Novel Approach for Wastewater Treatment. Current State and Future Perspectives

Naturally occurring substances or polymeric biomolecules synthesized by living organisms during their entire life cycle are commonly defined as biopolymers. Different classifications of biopolymers have been proposed, focusing on their monomeric units, thus allowing them to be distinguished into three different classes with a huge diversity of secondary structures. Due to their ability to be easily manipulated and modified, their versatility, and their sustainability, biopolymers have been proposed in different fields of interest, starting from food, pharmaceutical, and biomedical industries, (i.e., as excipients, gelling agents, stabilizers, or thickeners). Furthermore, due to their sustainable and renewable features, their biodegradability, and their non-toxicity, biopolymers have also been proposed in wastewater treatment, in combination with different reinforcing materials (natural fibers, inorganic micro- or nano-sized fillers, antioxidants, and pigments) toward the development of novel composites with improved properties. On the other hand, the improper or illegal emission of untreated industrial, agricultural, and household wastewater containing a variety of organic and inorganic pollutants represents a great risk to aquatic systems, with a negative impact due to their high toxicity. Among the remediation techniques, adsorption is widely used and documented for its efficiency, intrinsic simplicity, and low cost. Biopolymers represent promising and challenging adsorbents for aquatic environments’ decontamination from organic and inorganic pollutants, allowing for protection of the environment and living organisms. This review summarizes the results obtained in recent years from the sustainable removal of contaminants by biopolymers, trying to identify open questions and future perspectives to overcome the present gaps and limitations.

Highly dispersive palladium nanoparticle in nanoconfined spaces for heterogeneous catalytic reduction of anthropogenic pollutants

Pd-containing catalysts are highly promising in catalytic reactions, and their activity severely dependent on the dispersion extent of Pd nanoparticles (Pd NPs) . However, the regulation of Pd NPs size and dispersion degree are now pretty much the agendas. Here we report a facile solid-state fabrication strategy (SSFS) to promote Pd NPs dispersion in the nano environment of as made mesoporous silica KIT-6 (AK) by taking advantage of three critical factors, namely (i) the confined spaces where Pd precursor locate during fabrication, (ii) the interaction between Pd and supports, and (iii) the 3-dimentional (3D) structure of AK. First, AK presents 3D confined spaces between silica walls and template P123. Second, both silica walls and template P123 in AK offer interaction with Pd precursor. Third, the 3D structure provides more easy access for Pd insertion than linear channels structure without any pore blockage. The characterization results revealed that AK give better dispersion with smaller size of (3.9 nm) Pd than its counterpart (16 nm) prepared from template-free KIT-6 (CK). Moreover, the synthesized catalysts exhibit excellent activity and stability in catalytic conversion of p-nitrophenol (p-NP) and Methylene blue (MB). For a typical PdAK-1.0 catalyst, the complete conversion of P-NP and MB was achieved in less than 10 min with a reaction rate constant (k) of 0.3106 and 0.345 min^-1, respectively. It is superior to that on PdCK-1.0 prepared from template free KIT-6 and several reported catalysts. Furthermore, the PdAK-1.0 catalyst presents pretty good stability in catalytic reduction and is apparently better than PdCK-1.0.

Rapid hemostasis accompanied by antibacterial action of calcium crosslinking tannic acid-coated mesoporous silica/silver Janus nanoparticles

It is important to control bleeding and prevent bacterial infection for the wound people. The effective way is to fabricate an asymmetric Janus matrial for realizing rapid hemostasis and promoting wound healing. Herein, mesoporous silica nanoparticles (MSN) modified by tannic acid (TA), silver nanoparticles, and calcium ions (Ca-TA-MSN@Ag) with Janus structure were prepared via redox and coordination reactions. These anisotropic snowman-like particles possess obvious chemical compartition, in which silver nanoparticles are embedding in large MSN body. During blood coagulation, TA with catechol structure acts as a vasoconstrictor. Then, Ca-TA-MSN@Ag with high specific surface area (510.62 m²·g^-1) and large pore volume (0.48 m³·g^-1) induces red blood cell aggregation to form three-dimensional network structure with fibrin. Additionally, calcium ions as clotting factor IV and negative charge of Ca-TA-MSN@Ag accelerate coagulation cascade reaction. These three synergistic effects on animal model showed that hemostatic time of Ca-TA-MSN@Ag was shortened by nearly 50% compared to that of MSN. Moreover, Ca-TA-MSN@Ag possessed good blood compatibility, biocompatibility and antibacterial activity (~99%) against E. coli and S. aureus. The anisotropic Janus particles of Ca-TA-MSN@Ag with hemostatic performance and antibacterial activity will be a promising biomaterial for designing wound dressings in clinical application.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

One-pot synthesis of Ag@silicalite-1 using different silver amine complexes and their performance for styrene oxidation

Silicalite-1 encapsulating small Ag nanoparticles, synthesized using a facile one-pot strategy, showed high activity in the styrene oxidation reaction.

Green assembly of high-density and small-sized silver nanoparticles on lignosulfonate-phenolic resin spheres: Focusing on multifunction of lignosulfonate

In this work, sodium lignosulfonate (SL) was introduced in the hydrothermal preparation of phenol-formaldehyde (PF) resin sphere that was subsequently used as a green reducer and support for synthesis of Ag nanoparticles (Ag NPs). The results showed that the addition amount of SL had a remarkable effect on the size of the SL incorporated PF (SLPF) spheres and the smallest particle size was obtained when 20% of SL (based on phenol mass) was added. The addition of SL increased the surface area and negative charge of SLPF spheres, which enhanced the Ag NPs loading amount accordingly. Moreover, SL also prevented Ag NPs from aggregating effectively, resulting in the high-density loading of small size Ag NPs on the SLPF spheres. Therefore, the as-prepared Ag@SLPF composites exhibited significantly enhanced catalytic activities in the 4-nitrophenol reduction than that of SL-free Ag@PF. Besides, the Ag@SLPF catalyst demonstrated superior recyclability owing to strong anchoring between the Ag NPs and the support. Consequently, the work demonstrates the incorporation of SL enables the green formation of high-density and tunable Ag NPs on the SLPF support and then endows the composite catalyst with enhanced catalytic performance, which presents a promising value-added application of lignosulfonate for functional catalyst preparation.

Eco-friendly floatable foam hydrogel for the adsorption of heavy metal ions and use of the generated waste for the catalytic reduction of organic dyes

Benefiting from their three-dimensional network structure and various functional groups, hydrogels have emerged as efficient adsorbents for the removal of heavy metal ions from wastewater. However, the obvious drawbacks of hydrogels such as generation of toxic secondary waste after adsorption and difficulty in their separation and collection limit their practical application in wastewater treatment. Herein, we introduced a facile strategy of combining mechanical frothing and in situ radical polymerization to prepare a floatable porous foam hydrogel, which not only efficiently removed Cu2+ from water, but also could be easily collected. After adsorption, to avoid the generation of secondary toxic waste, a sustainable strategy of turning the waste into useful materials was introduced. The waste of the Cu2+_ adsorbed hydrogel was processed using NaBH4 solution to obtain a Cu nanoparticle (Cu NP)-loaded composite hydrogel, which was further employed as a catalyst for the catalytic reduction of organic dyes. Thus, this work established a convenient and sustainable strategy for the preparation of an eco-friendly floatable foam hydrogel for the efficient removal of heavy metal ions such as Cu2+ from water and turning the generated waste into useful materials, which is a concept envisaged to be applicable to other heavy metal ion-adsorbed hydrogel systems and will efficiently avoid unwanted secondary pollution.

Activity and stability of the catalytic hydrogel membrane reactor for treating oxidized contaminants

The catalytic hydrogel membrane reactor (CHMR) is an interfacial membrane process that uses nano-sized catalysts for the hydrogenation of oxidized contaminants in drinking water. In this study, the CHMR was operated as a continuous-flow reactor using nitrite (NO₂^-) as a model contaminant and palladium (Pd) as a model catalyst. Using the overall bulk reaction rate for NO₂^- reduction as a metric for catalytic activity, we evaluated the effect of the hydrogen gas (H₂) delivery method to the CHMR, the initial H₂ and NO₂^- concentrations, Pd density in the hydrogel, and the presence of Pd-deactivating species. The chemical stability of the catalytic hydrogel was evaluated in the presence of aqueous cations (H⁺, Na⁺, Ca²⁺) and a mixture of ions in a hard groundwater. Delivering H₂ to the CHMR lumens using a vented operation mode, where the reactor is sealed and the lumens are periodically flushed to the atmosphere, allowed for a combination of a high H₂ consumption efficiency and catalytic activity. The overall reaction rate of NO₂^- was dependent on relative concentrations of H₂ and NO₂^- at catalytic sites, which was governed by both the chemical reaction and mass transport rates. The intrinsic catalytic reaction rate was combined with a counter-diffusional mass transport component in a 1-D computational model to describe the CHMR. Common Pd-deactivating species [sulfite, bisulfide, natural organic matter] hindered the reaction rate, but the hydrogel afforded some protection from deactivation compared to a batch suspension. No chemical degradation of the hydrogel structure was observed for a model water (pH > 4, Na⁺, Ca²⁺) and a hard groundwater after 21 days of exposure, attesting to its stability under natural water conditions.

Magnetic Chitosan-Supported Silver Nanoparticles: A Heterogeneous Catalyst for the Reduction of 4-Nitrophenol

Developing heterogeneous catalyst using chitosan (CS) and magnetic Fe3O4 as support has been remarkably attractive due to their availability, low cost and non-toxicity. In this work, a heterogeneous catalyst (denoted as Fe3O4@CS@MS@Ag) was fabricated by the deposition of silver nanoparticles on magnetic chitosan via an easy and facile modification of its surface with methyl salicylate (MS). The catalyst was characterized using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffractometer (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). To the best of our knowledge, for the first time, CS decorated Fe3O4 (Fe3O4@CS) has shown the catalytic activity for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in presence of NaBH4. Surface modified magnetic chitosan (Fe3O4@CS@MS) also acts as active catalyst towards the reduction of 4-NP. However, catalytic efficiency has increased fourfold when silver-nanoparticles-deposited magnetic chitosan (Fe3O4@CS@MS@Ag) used as our target catalyst. The catalyst was separated with external magnet after each cycle of catalytic reaction and reused effectively five times with almost 90% efficiency.

Catalytic Hydrogel Membrane Reactor for Treatment of Aqueous Contaminants

Heterogeneous hydrogenation catalysis is a promising approach for treating oxidized contaminants in drinking water, but scale-up has been limited by the challenge of immobilization of the catalyst while maintaining efficient mass transport and reaction kinetics. We describe a new process that addresses this issue: the catalytic hydrogel membrane (CHM) reactor. The CHM consists of a gas-permeable hollow-fiber membrane coated with an alginate-based hydrogel containing catalyst nanoparticles. The CHM benefits from counter-diffusional transport within the hydrogel, where H₂ diffuses from the interior of the membrane and contaminant species (e.g., NO₂^-, O₂) diffuse from the bulk aqueous solution. The reduction of O₂ and NO₂^- were investigated using CHMs with varying palladium catalyst densities, and mass transport of reactive species in the catalytic hydrogel was characterized using microsensors. The thickness of the "reactive zone" within the hydrogel affected the reaction rate and byproduct selectivity, and it was dependent on catalyst density. In a continuously mixed flow reactor test using groundwater, the CHM activity was stable for a 3 day period. Outcomes of this study illustrate the potential of the CHM as a scalable process in the treatment of aqueous contaminants.

Bimetallic Nanoparticles Anchored on Core-Shell Support as an Easily Recoverable and Reusable Catalytic System for Efficient Nitroarene Reduction

We report an easily recoverable and reusable versatile magnetic catalyst (Fe3O4@CS_AgNi, where CS = chitosan) for organic reduction reactions. The catalytic system is prepared by dispersing AgNi bimetallic nanoparticles on the magnetite core-shell (Fe3O4@CS). The as-synthesized catalyst has been characterized by spectroscopic techniques, such as IR, UV-vis, and X-ray photoelectron spectroscopy (XPS), and analytical tools, such as thermogravimetric analysis, powder X-ray diffraction, Brunauer-Emmett-Teller adsorption, FEG-scanning electron microscopy, high-resolution transmission electron microscopy (HR-TEM), inductively coupled plasma-atomic emission spectroscopy, and magnetic measurements. HR-TEM studies indicate the core-shell structure of Fe3O4@CS and confirm the presence of AgNi nanoparticles on the surface of Fe3O4@CS spheres. IR spectral and XPS studies lend evidence for the occurrence of a strong chemical interaction between the amino groups of CS and AgNi nanoparticles. The nano-catalyst Fe3O4@CS_AgNi rapidly reduces p-nitrophenol to p-aminophenol using NaBH4 as the reductant within a few minutes under ambient conditions (as monitored by UV-visible spectroscopy). The utility of this catalytic system has also been extended to the reduction of other nitroarenes. A strong interaction between Fe3O4@CS and AgNi nanoparticles impedes the leaching of AgNi nanoparticles from the core-shell support, leading to excellent reusability of the catalyst.

In situ synthesis of poly (γ- glutamic acid)/alginate/AgNP composite microspheres with antibacterial and hemostatic properties

In the present work, a poly(γ-glutamic acid)/alginate/silver nanoparticle (PGA/Alg/AgNP) composite microsphere with excellent antibacterial and hemostatic properties was prepared by the in situ UV reduction and emulsion internal gelation method, and its potential application for antibacterial hemostatic dressing was explored. Well dispersed AgNPs were in situ synthesized by a UV reduction method with alginate as stabilizer and reductant. The AgNPs showed excellent antibacterial activities against both gram-negative and gram-positive bacteria. Additionally, the AgNPs prepared by the in-situ UV reduction exhibited better biocompatibility and antibacterial effects than those prepared by the conventional chemical reduction method. PGA/Alg/AgNP composite microspheres were then prepared with the AgNPs by an emulsion internal gelation method. Such microspheres were found to be a porous and hollow network with pH-sensitive swelling properties and excellent hemostatic performance, indicating its application potentials as an advanced antibacterial hemostatic material.

Novel alginate/polyethyleneimine hydrogel adsorbent for cascaded removal and utilization of Cu2+ and Pb2+ ions

Heavy metal ion pollution leads to severe health risk to human beings. Herein, a natural and highly efficient sodium alginate (ALG)/polyethyleneimine (PEI) composite hydrogel was designed and fabricated for the removal of heavy metal ions from wastewater. The adsorption of heavy metal ions on the ALG based, 3D composite hydrogel were thoroughly investigated in this study. Furthermore, the in situ reduced metal nanoparticle-loaded ALG/PEI composite hydrogel provided us a sustainable utilization route of the heavy metal ion with a promising adsorption-catalysis ability. In general, this research will present an effective and practical paradigm for the cascaded treatment and recycling of heavy metal ions in wastewater.

Functionalization of Silk with In-Situ Synthesized Platinum Nanoparticles

After platinum nanoparticles (PtNPs) were in-situ synthesized on silk fabrics through heat treatment, it was determined that the treatment of the silk fabrics with PtNPs imparted multiple functions, including coloring, catalysis, and antibacterial activity. The formation of PtNPs on fabrics was affected by the Pt ion concentration, pH value of solution, and reaction temperature. Acidic condition and high temperature were found to facilitate the formation of PtNPs on silk. The color strength of silk fabrics increased with the concentration of Pt ions. The PtNP treated silk fabrics exhibited reasonably good washing color fastness and excellent rubbing color fastness. The morphologies and chemical components of the treated silk fabrics were analyzed using scanning electron microscopy and X-ray photoelectron spectroscopy. The PtNP treated silk fabric exhibited significant catalytic function and a notable antibacterial effect against Escherichia coli (E. coli).

Magnetic N-doped Co–carbon composites derived from metal organic frameworks as highly efficient catalysts for p-nitrophenol reduction reaction

Magnetic nitrogenous cobalt–carbon composites were synthesized via one-step calcination of N-ZIF-67 as a strategy to introduce metal and N atoms into a conductive carbon matrix, and were applied as catalysts in the reduction of 4-NP by NaBH₄. N-Co@C-800-3 exhibited much better catalytic activity, in terms of both conversion efficiency and reaction kinetics, compared to the others.

Bioinspired interconnected hydrogel capsules for enhanced catalysis

Polysaccharide-based hydrogel capsules with cristae-like internal membranes loaded with Ag nanoparticles exhibited effective catalytic activity as micro-reaction systems.

Gold, silver and nickel nanoparticle anchored cellulose nanofiber composites as highly active catalysts for the rapid and selective reduction of nitrophenols in water

Highly active metal nanoparticle (MNP) supported cellulose nanofiber (CNF) composites (Au/CNF, Ni/CNF and Ag/CNF) were prepared for the reduction of 4- and 2-nitrophenols (4-NP and 2-NP) in water. Transmission electron microscopy (TEM) images showed that the ultrafine nanoparticles (Au, Ni and Ag NPs) were uniformly deposited on CNFs surface. The content of Au (9.7 wt%), Ni (21.5 wt%) and Ag (22.6 wt%) in Au/CNF, Ni/CNF and Ag/CNF respectively was determined by energy dispersive spectroscopy (EDS) and inductive coupled plasma-mass spectroscopy (ICP-MS) analysis. The chemical state of the MNPs in Au/CNF, Ni/CNF and Ag/CNF was determined by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The significant metal-support interaction was studied by means of XPS. The Au/CNF, Ni/CNF and Ag/CNF demonstrated excellent catalytic activity towards the reduction of nitrophenols to aminophenols in water. To our delight, even a very low amount of catalyst was also found to be good enough to achieve 100% reduction of 4- and 2-NP with a higher reaction rate (within 5 min). The best rate constant (k_app) values were determined for the cellulose nanocomposites. To the best our knowledge, Au/CNF, Ni/CNF and Ag/CNF are the most efficient nanocatalysts for the reduction of 4- and 2-NP reported to date. The catalytic performance of Au/CNF, Ni/CNF and Ag/CNF was compared with previously reported results. A possible mechanism has been proposed for these catalytic systems.

Metal nanoparticles supported cellulose nanofiber composites (Au/CNF, Ni/CNF and Ag/CNF) were found to be highly efficient nanocatalysts for the rapid and selective reduction of nitrophenols in water.

AuPd Bimetallic Nanocrystals Embedded in Magnetic Halloysite Nanotubes: Facile Synthesis and Catalytic Reduction of Nitroaromatic Compounds

In this research, a facile and effective approach was developed for the preparation of well-designed AuPd alloyed catalysts supported on magnetic halloysite nanotubes (HNTs@Fe₃O₄@AuPd). The microstructure and the magnetic properties of HNTs@Fe₃O₄@AuPd were confirmed by transmission electron microscopy (TEM), high resolution TEM (HRTEM), energy-dispersive X-ray spectroscopy (EDS), and vibrating sample magnetometry (VSM) analyses. The catalysts, fabricated by a cheap, environmentally friendly, and simple surfactant-free formation process, exhibited high activities during the reduction of 4-nitrophenol and various other nitroaromatic compounds. Moreover, the catalytic activities of the HNTs@Fe₃O₄@AuPd nanocatalysts were tunable via adjusting the atomic ratio of AuPd during the synthesis. As compared with the monometallic nanocatalysts (HNTs@Fe₃O₄@Au and HNTs@Fe₃O₄@Pd), the bimetallic alloyed HNTs@Fe₃O₄@AuPd nanocatalysts exhibited excellent catalytic activities toward the reduction of 4-nitrophenol (4-NP) to 4-aminophenol. Furthermore, the as-obtained HNTs@Fe₃O₄@AuPd can be recycled several times, while retaining its functionality due to the stability and magnetic separation property.