Facile Green Gamma Irradiation of Water Hyacinth Derived-Fluorescent Carbon Dots Functionalized Thiol Moiety for Metal Ion Detection

Fluorescent sensor-based carbon dots (CDs) have significantly developed for sensing metal ions because of their great physical and optical properties, including tunable fluorescence emission, high fluorescence quantum yield, high sensitivity, non-toxicity, and biocompatibility. In this research, a green synthetic approach via simple gamma irradiation for the carbon dot synthesis from water hyacinth was developed since water hyacinth has been classified as an invasive aquatic plant containing cellulose, hemicellulose, and lignin. The thiol moiety (SH) was further functionalized on the surface functional groups of CDs as the "turn-off" fluorescent sensor for metal ion detection. Fluorescence emission displayed a red shift from 451 to 548 nm when excited between 240 and 500 nm. The quantum yield of CDs-SH was elucidated to be 13%, with strong blue fluorescence emission under ultraviolet irridiation (365 nm), high photostability and no photobleaching. The limit of detection was determined at micromolar levels for Hg2+, Cu2+, and Fe3+. CDs-SH could be a real-time monitoring sensor for Hg2+ and Cu2+ as fluorescence quenching was observed within 2 min. Furthermore, paper test-strip based CDs-SH could be applied to detect these metal ions.

A review on I-III-VI ternary quantum dots for fluorescence detection of heavy metals ions in water: optical properties, synthesis and application

Heavy metal contamination remains a major threat to the environment. Evaluating the concentrations of heavy metals in water environments is a crucial step towards a viable treatment strategy. Non-cadmium photo-luminescent I-III-VI ternary QDs have attracted increasing attention due to their low toxicity and extraordinary optical properties, which have made them popular in biological applications. Recently, ternary I-III-VI-QDs have gained growing interest as fluorescent detectors of heavy metal ions in water. Here, we review the research progress of ternary I-III-VI QDs for the fluorescence detection of heavy metal ions in water. First, we summarize the optical properties and synthesis methodologies of ternary I-III-VI QDs. Then, we present various detection mechanisms involved in the fluorescence detection of heavy metal ions, which are mostly attributed to direct interaction between these unique QDs and the metal ions, seen in the form of fluorescence quenching and fluorescence enhancement. We also display the potential applications in environmental remediation such as water treatment and associated challenges of I-III-VI QDs in the fluorescence detection of Cu2+ and other metal ions.

A fluorescent probe for rapid detection of low concentration mercury ions and its application in biological cells

As a toxic substance, mercury can easily cause harm to organisms and humans. The development of methods that allow rapid detection of low concentrations of mercury ions has a positive effect on the natural environment and human health. The fluorescent probe RBSH reported in this paper has a detection limit as low as 5.9 nM, and a fast response time and allows naked eye detection. We characterized its structure by nuclear magnetic resonance and mass spectrometry, and explored the response mechanism of the probe using Job's plot, and ¹H NMR and mass spectrometry. UV-vis spectrophotometry and fluorescence spectroscopy show the excellent optical properties of the probe RBSH. The low toxicity and high cell penetration capacity demonstrated by the cellular assay open up the possibility of biological experiments. By selecting hosts (natural water samples, soybean plants and zebrafish) where mercury ions are likely to be present in the biological chain for low concentration Hg²⁺ detection, the results all demonstrated the excellent performance of the probe RBSH.

Novel “turn on–off” paper sensor based on nonionic conjugated polythiophene-coated CdTe QDs for efficient visual detection of cholinesterase activity

A novel conjugated polythiophene (CP) compound was successfully combined with CdTe quantum dots to improve their selectivity and sensitivity for the efficient visual detection of AChE activity via the color variation of CdTe/CP.

A novel bimacrocyclic polyamine-based fluorescent probe for sensitive detection of Hg2+ and glutathione in human serum

Detection of glutathione in human serum is of great importance for clinical diagnosis of various diseases, such as AIDS, diabetes mellitus, Alzheimer disease and cancer. In this work, a new water-soluble bismacrocyclic polyamine-derived compound, namely L, which contains two molecules of 4-nitro-1,2,3-benzoxa-diazole as the fluorophores, was designed and prepared. The experiments of selectivity of L toward metal ions showed it could rapidly and sensitively detect Hg²⁺ with a detection limit of 27 nM. Furthermore, the cell imaging and co-staining experiments in HeLa cells demonstrated that the L-Hg²⁺ probe had selectivity for the Golgi apparatus to a certain degree. Moreover, it had excellent selectivity for biothiols, especially for glutathione. Finally, the probe was successfully applied to sensitively detect glutathione (GSH) in human serum and fetal bovine serum.

Semi-quantitative and visual assay of copper ions by fluorescent test paper constructed with dual-emission carbon dots

A novel, simple and effective dual-emissive fluorescent probe for the sensitive and selective detection of Cu(ii) has been developed by mixing blue carbon dots and orange carbon dots, with a sensitive detection limit of 7.31 nM. The blue fluorescence can be selectively quenched by Cu(ii), while the orange fluorescence is a internal reference, resulting in a distinguishable fluorescence color change from blue to orange under a UV lamp. Meanwhile, its as-prepared text paper provides a convenient and simple approach for the visual detection of Cu(ii) and successfully applied in real water samples, with a dose-discerning ability as low as 50 nM. The methodology reported here opens a novel pathway toward the real applications of fluorescent test papers.

A ratiometric fluorescence nanosensor has been developed by mixing blue fluorescent carbon dots and orange fluorescent carbon dots for the detection of copper ions.

Aqueous synthesis of dual-targeting Gd-doped CuInS2/ZnS quantum dots for cancer-specific bi-modal imaging

CIGS/ZnS@FA|APBA q-dots were synthesized in an aqueous phase; these quantum dots exhibited great potential as dual-modal nanoprobes for optical/MR imaging.

Fluorescent nanoprobes for sensing and imaging of metal ions: recent advances and future perspectives

Recent advances in nanoscale science and technology have generated nanomaterials with unique optical properties. Over the past decade, numerous fluorescent nanoprobes have been developed for highly sensitive and selective sensing and imaging of metal ions, both in vitro and in vivo. In this review, we provide an overview of the recent development of the design and optical properties of the different classes of fluorescent nanoprobes based on noble metal nanomaterials, upconversion nanoparticles, semiconductor quantum dots, and carbon-based nanomaterials. We further detail their application in the detection and quantification of metal ions for environmental monitoring, food safety, medical diagnostics, as well as their use in biomedical imaging in living cells and animals.

Application of L-Aspartic Acid-Capped ZnS:Mn Colloidal Nanocrystals as a Photosensor for the Detection of Copper (II) Ions in Aqueous Solution

Water-dispersible ZnS:Mn nanocrystals (NCs) were synthesized by capping the surface with polar L-aspartic acid (Asp) molecules. The obtained ZnS:Mn-Asp NC product was optically and physically characterized using the corresponding spectroscopic methods. The ultra violet-visible (UV-VIS) absorption spectrum and photoluminescence (PL) emission spectrum of the NCs showed broad peaks at 320 and 590 nm, respectively. The average particle size measured from the obtained high resolution-transmission electron microscopy (HR-TEM) image was 5.25 nm, which was also in accordance with the Debye-Scherrer calculations using the X-ray diffraction (XRD) data. Moreover, the surface charge and degree of aggregation of the ZnS:Mn-Asp NCs were determined by electrophoretic and hydrodynamic light scattering methods, respectively. These results indicated the formation of agglomerates in water with an average size of 19.8 nm, and a negative surface charge (−4.58 mV) in water at ambient temperature. The negatively-charged NCs were applied as a photosensor for the detection of specific cations in aqueous solution. Accordingly, the ZnS:Mn-Asp NCs showed an exclusive luminescence quenching upon addition of copper (II) cations. The kinetic mechanism study on the luminescence quenching of the NCs by the addition of the Cu²⁺ ions proposed an energy transfer through the ionic binding between the two oppositely-charged ZnS:Mn-Asp NCs and Cu²⁺ ions.

Ratiometric fluorescent paper sensor utilizing hybrid carbon dots-quantum dots for the visual determination of copper ions

A simple and effective ratiometric fluorescence nanosensor for the selective detection of Cu(2+) has been developed by covalently connecting the carboxyl-modified red fluorescent cadmium telluride (CdTe) quantum dots (QDs) to the amino-functionalized blue fluorescent carbon nanodots (CDs). The sensor exhibits the dual-emissions peaked at 437 and 654 nm, under a single excitation wavelength of 340 nm. The red fluorescence can be selectively quenched by Cu(2+), while the blue fluorescence is a internal reference, resulting in a distinguishable fluorescence color change from pink to blue under a UV lamp. The detection limit of this highly sensitive ratiometric probe is as low as 0.36 nM, which is lower than the U.S. Environmental Protection Agency (EPA) defined limit (20 μM). Moreover, a paper-based sensor has been prepared by printing the hybrid carbon dots-quantum dots probe on a microporous membrane, which provides a convenient and simple approach for the visual detection of Cu(2+). Therefore, the as-synthesized probe shows great potential application for the determination of Cu(2+) in real samples.

Highly-sensitive organophosphorus pesticide biosensors based on CdTe quantum dots and bi-enzyme immobilized eggshell membranes

An optical biosensing method using CdTe quantum dots (QDs) and bi-enzyme-immobilized eggshell membranes for the determination of organophosphorus pesticides (OPs) has been developed.

Kinetic and sensitive analysis of tyrosinase activity using electron transfer complexes: in vitro and intracellular study

Tyrosinase is an important marker of human diseases such as the neurodegeneration associated with Parkinson's disease and melanoma. Sensitive detection of tyrosinase activity in vitro and inside cells is of great significance to medical diagnostics and skin disorder treatments. With unique photophysical properties, semiconductor quantum dots (QDs) are employed as photoluminescent platforms for various biosensing, in particular for the detection of enzyme activities. In this work, QDs are functionalized with tyrosine and zwitterionic molecules to construct a nanometer-scale scaffold (QD-Tyr conjugate), and this is used to test tyrosinase activity in vitro and inside cells. Tyrosinase oxidizes tyrosine to dopachrome and switches on the electron-transfer access, which relates to fluorescence quenching. High quenching efficiency is achieved by shortening the distance between the electron donors and acceptors, which is attributed to the small size of the conjugated tyrosine. Enzymatic process curves reveal the enhanced enzymatic activity on the conjugated nanoparticle substrate, which leads to highly sensitive detection of tyrosinase (as low as 1 nM). It is also demonstrated that QD-Tyr conjugates can sensitively probe intracellular tyrosinase in melanoma cells, which promises great potential in disease monitoring and medical diagnostics.

Discriminative detection of bivalent Cu by dual-emission ZnSe quantum dot fluorescence sensing via ratiometric fluorescence measurements

In this work, we showed that 1-thioglycerol (TG)-capped ZnSe quantum dots (QDs) with dual-emission could perform ideal QD fluorescence sensing for ratiometric fluorescence measurements. By comparing the fluorescence ratios at two emission peaks before and after the addition of cations, the discriminative detection of Cu(II) was realized, even in the case of co-existing with large amounts of other sensitive cations, such as Ag(I). The discriminative detection of Cu(II) is accurate with co-existing Ag(I) below 10 μmol L(-1). By a joint investigation of the ionic diffuse dynamics and carrier recombination dynamics, we found that the adsorbed layer of QDs plays a key role in the discriminative detection of Cu(II) from Ag(I) or other sensitive cations. The moderate adsorption capacity with a QD adsorbed layer makes Cu(II) capable of travelling across the QD double-layer structure, following a surface doping process via chemical reactions between Cu(II) and the QD surface atoms. As a result of Cu(II) doping, there were three major carrier recombination channels: the non-radiation recombination between the QD conduction band to the Cu(II) energy level, together with the non-radiation recombination and radiation recombination between the trap state energy levels and the Cu(II) energy level. As for Ag(I) and other sensitive cations, they have a strong adsorption capacity with the QD adsorbed layer, making them mainly present on the adsorbed layer. Due to the blocking of the ligand layer, we only observed weak coupling of the ZnSe conduction band with the Ag(I) energy level via a non-radiation recombination channel.

Semicondutor quantum dots-based metal ion probes

Semiconductor quantum dots (QDs) exhibit unique optical and photophysical properties that offer significant advantages over organic dyes as optical labels for chemo/bio-sensing. This review addresses the methods for metal ion detection with QDs, including photoluminescent, electrochemiluminescent, photoelectrochemical, and electrochemical approaches. The main mechanisms of direct interaction between QDs and metal ions which lead to photoluminescence being either off or on, are discussed in detail. These direct interactions provide great opportunities for developing simple yet effect metal ion probes. Different methods to design the chemically-modified QD hybrid structures through anchoring metal ion-specific groups onto the surface of QDs are summarized. Due to the spatial separation of the luminescence center and analyte recognition sites, these chemically-modified QDs offer greatly improved sensitivity and selectivity for metal ions. Several interesting applications of QD-based metal ion probes are presented, with specific emphasis on cellular probes, coding probes and sensing with logic gate operations.