Hypersensitive quantification of major astringency markers in food and wine by substoichiometric quenching of silicon-rhodamine conjugates

Tannins are chemically diverse polyphenols in plant-derived products that not only show diverse biological activities but also play a crucial role in determining the sensory attributes of food and beverages. Therefore, their accurate and cost-effective quantification is essential. Here, we identified a novel fluorescence quenching mechanism of different synthetic rhodamine fluorophores, with a high selectivity towards tannic acid (TA) and catechin-3-gallate (C3G) compared to a structurally diverse panel of tannins and polyphenols. Specific chemical conjugates of silicon-rhodamine with alkyl linkers attached to bulky apolar moieties had a limit of detection near 500 pM and a linear range spanning 5-100 nM for TA. We validated the assay on 18 distinct red wine samples, which showed high linearity (R2 = 0.92) with methylcellulose precipitation with no interference from anthocyanins. In conclusion, a novel assay was developed and validated that allows the sensitive and selective quantification of major astringency markers abundant in food and beverages.

Green one-step synthesis of N-doped carbon quantum dots for fluorescent detection of lemon yellow in soft drinks

A new fluorescent sensor for the determination of lemon yellow was developed based on nitrogen-doped carbon quantum dots (N-CQDs), which were prepared via a hydrothermal method with dried pomelo peel and L-tyrosine. The N-CQDs exhibited the blue fluorescence with a quantum yield of 28 %. The sensing principle of N-CQDs was quenched by lemon yellow via static quenching. The potential interfering substances showed no influence on the detection of lemon yellow. The limit of detection was 0.023 mg/L and lower than that of national standard. Furthermore, the synthesized N-CQDs have been successfully applied to the measurement of lemon yellow in real samples. Hence, the N-CQDs would be a promising sensor in food analysis.

Dual-signal detection of tannic acid in red wines based on the peroxidase activity of carbon dots

Herein, a novel type of phosphorus and iron-doped carbon dot (P,Fe-CD) with outstanding peroxidase activity and excellent fluorescence performance was hydrothermally synthesized to colorimetrically and fluorimetrically detect tannic acid (TA). In the presence of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2, the P,Fe-CDs could oxidize colorless TMB to a blue oxidation product (oxTMB) resulting in an increased value of absorbance. Simultaneously, the fluorescence intensity of P,Fe-CDs at 430 nm could be quenched owing to the fluorescence resonance energy transfer (FRET) between P,Fe-CDs and the generated oxTMB. Meanwhile, after adding the TA to the system containing TMB, H2O2 and P,Fe-CDs, the value of absorbance could be decreased and the fluorescence could be recovered because of the reduction reaction between TA and oxTMB. Therefore, fluorescence intensity and value of absorbance could be applied to quantitatively detect TA with good linearities between the concentration of TA and the fluorescence intensity/value of absorbance (0.997 and 0.997 for the colorimetric signal and fluorimetric one, respectively) and low limits of detection (0.093 μmol L-1 and 0.053 μmol L-1 for the colorimetry and the fluorimetry, respectively), which was successfully applied to the detection of TA in red wines. Moreover, we applied a smartphone-assisted method to the point-of-care detection of TA with accurate results, providing a new technique for TA detection and food quality monitoring.

Monitoring saliva compositions for non-invasive detection of diabetes using a colorimetric-based multiple sensor

The increasing population of diabetic patients, especially in developing countries, has posed a serious risk to the health sector, so that the lack of timely diagnosis and treatment process of diabetes can lead to threatening complications for the human lifestyle. Here, a multiple sensor was fabricated on a paper substrate for rapid detection and controlling the progress of the diabetes disease. The proposed sensor utilized the sensing ability of porphyrazines, pH-sensitive dyes and silver nanoparticles in order to detect the differences in saliva composition of diabetic and non-diabetic patients. A unique color map (sensor response) was obtained for each studied group, which can be monitored by a scanner. Moreover, a good correlation was observed between the colorimetric response resulting from the analysis of salivary composition and the fasting blood glucose (FBG) value measured by standard laboratory instruments. It was also possible to classify participants into two groups, including patients caused by diabetes and those were non-diabetic persons with a total accuracy of 88.9%. Statistical evaluations show that the multiple sensor can be employed as an effective and non-invasive device for continuous monitoring of diabetes, substantially in the elderly.

Determination of antioxidant activity by in situ synthesis of AgNPs using in-tube SPME coupled on-line to capillary liquid chromatography

A chromatographic system based on in-tube SPME coupled to capillary LC-DAD has been used to study the synthesis of silver nanoparticles using polyphenols in different scenarios: excess of the reducing agent or of the silver salt, addition of the cationic surfactants, and thermal synthesis. The optimized synthesis conditions allowed to quantify the polyphenols used as reducing agents, such as Trolox and chlorogenic acid. Two chromatographic peaks with different absorption spectrum were monitored during the syntheses. Depending on the molar relationship, a linear relation between the area of the chromatographic peaks and the concentration of the silver or polyphenol was established. For stabilization of silver nanoparticles, different cationic surfactants were used allowing to evaluate the role of anion (chloride and bromide) and of the alkyl chain. The proposed methodology can be used to determine chlorogenic acid up to 3 mM with a detection limit of 34 μM at λ= 400 nm. Chlorogenic acid was determined in dietary products with successful results. Precision (RSD=10%) and recovery (97-100%) were also satisfactory.

N,N-dicarboxymethyl Perylene-diimide-modified CdV2O6 Nanorods for Colorimetric Sensing of H2O2 and Pyrogallol

The peroxidase-like activity of CdV₂O₆ nanorods has been considerably improved by modification with N, N-dicarboxymethyl perylene-diimide (PDI) as a photosensitizer. The peroxidase-like behaviors are evaluated by virtue of the colorless chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB), which is fast changed into blue oxTMB in the presence of H₂O₂ in only 90 s. PDI-CdV₂O₆ exhibits high stability at elevated temperatures and PDI-CdV₂O₆ retains more than 70% of its catalytic activity over a wide range of 15 to 60 °C. The catalytic mechanism of PDI-CdV₂O₆ is ascribed to the synergistic interaction between PDI and CdV₂O₆ and the generation of •O₂^- radicals. Based on the enhanced peroxidase-like activity of PDI-CdV₂O₆, a selective colorimetric sensor has been constructed for H₂O₂ and pyrogallol (PG) with detection limits of 36.5 μM and 0.179 μM, respectively. The feasibility of the proposed sensing platform has been validated by detecting H₂O₂ in milk and pyrogallol in tap water.

Straightforward smartphone assay for quantifying tannic acid in beverages based on colour change of Eu3+/polyethyleneimine complex

Tannic acid (TA)-a natural product-is a polyphenol derivative that occurs in certain kinds of beverages. A large amount of TA could give rise to an unpleasant flavour and could negatively affect the human body by causing stomach irritation, abdominal pain, nausea, vomiting, and even death. Thus, the need exists for a simple TA detection procedure that meets specific criteria such as on-site analysis, portability, and affordability. Herein, we present a new TA assay, which is based on the fluorescent quenching effect of an efficient fluorophore, and which comprises a smartphone-integrated homemade reader system. The fluorescent polyethyleneimine-derivatised polymer (FP), a strong emitter at 510 nm, was synthesised with the aid of a facile sonication method. In the presence of Eu³⁺ ions, TA quenches the fluorescence of the FP via electrostatic interaction. A smartphone was used to capture an image of the FP undergoing fluorescence for conversion to RGB values. The blue channel was chosen for further analysis because it offered the highest R²-value compared to the red and green channels. We verified these results using a commercial spectrofluorometer and calculated the limit of detection of this assay as 87 nM and 20 nM for the homemade reader and spectrofluorometer, respectively. The detection range for TA with the proposed assay is 0.16-66.66 μM. The application of the proposed method to real beverage samples for TA detection demonstrates its analytical applicability.

Quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles: one-pot synthesis, characterization, and anticancer and antibacterial activities

The presented study comprises the one-pot synthesis and the characterization of quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles (Ch/Q- and Ch/CA-Ag NPs), and their antibacterial and anticancer activities. The formation of Ch/Q- and Ch/CA-Ag NPs has been confirmed by ultraviolet-visible (UV-vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM). The characteristic surface plasmon resonance (SPR) absorption band has been found at 417 and 424 nm for Ch/Q- and Ch/CA-Ag NPs, respectively. The formation of a chitosan shell comprising quercetin and caffeic acid, which surround the colloidal core Ag NPs, was confirmed by UV-vis, and FTIR analyses, and monitored by TEM microscopy. The size of nanoparticles has been determined as 11.2 and 10.3 nm for Ch/Q- and Ch/CA-Ag, respectively. The anticancer activity of Ch/Q- and Ch/CA-Ag NPs has been evaluated against U-118 MG (human glioblastoma) and ARPE-19 (human retinal pigment epithelium) cells. Both NPs showed anticancer activity, but Ch/Q-Ag NPs seemed to be more effective on cancer cell lines (U-118 MG) in comparison to healthy ones (ARPE-19). Furthermore, the antibacterial activity of Ch/Q- and Ch/CA-Ag NPs against Gram-negative (P. aeruginosa and E. coli) and Gram-positive (S. aureus and S. epidermidis) bacteria was determined, and dose-dependent antibacterial effects were found.

Fabrication of chitosan-MnO2‑iridium/nanoceria supported nanoparticles: Catalytic and anti-radical activities

Chitosan capped MnO₂‑iridium nanoparticles supported on nanoceria (Ch-MnO₂-Ir/CeO₂) were fabricated by using combination of colloidal solution and metal displacement galvanic methods. The oxidative degradation of acid orange 7 in aqueous solution by activated persulfate with the as-prepared nanoparticles was studied. The resulting Ch-MnO₂-Ir/CeO₂ with S₂O₈^2-, 80 % degraded 70.06 mg/L of acid orange 7 within 100 min, while at the same time, Ch-Ir, Ch-MnO₂, and Ch-Ir-MnO₂ remained inactive. CeO₂ increased the surface of the catalyst, and also improved the reactive oxygen species site of Ch-Ir-MnO₂ through the activation of S₂O₈^2- with CeO₂. The reversible redox cycle reaction, Ce (III) ↔ Ce (IV) and strong synergistic effect of MnO₂-Ir are responsible for the remarkable catalytic performance of Ch-MnO₂-Ir/CeO₂/S₂O₈^2- system. The degradation of acid orange 7 could be significantly retarded with inorganic (NO₃^- < Cl^- < SO₄^2- < H₂PO₄^- < HCO₃^-) and organic scavengers (ethanol < tertiary butanol < benzoquinone < phenol). Ch-MnO₂-Ir/CeO₂ exhibited excellent stability and reusability. Anti-radical activity of chitosan and Ch-MnO₂-Ir/CeO₂ was evaluated with 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical. The free radical properties increase with concentration of chitosan and Ch-MnO₂-Ir/CeO₂.

Silver Nanoparticle Synthesis via Photochemical Reduction with Sodium Citrate

The aim of this paper is to provide a simple and efficient photoassisted approach to synthesize silver nanoparticles, and to elucidate the role of the key factors (synthesis parameters, such as the concentration of TSC, irradiation time, and UV intensity) that play a major role in the photochemical synthesis of silver nanoparticles using TSC, both as a reducing and stabilizing agent. Concomitantly, we aim to provide an easy way to evaluate the particle size based on Mie theory. One of the key advantages of this method is that the synthesis can be "activated" whenever or wherever silver nanoparticles are needed, by premixing the reactants and irradiating the final solution with UV radiation. UV irradiance was determined by using Keitz's theory. This argument has been verified by premixing the reagents and deposited them in an enclosed space (away from sunlight) at 25 °C, then checking them for three days. Nothing happened, unless the sample was directly irradiated by UV light. Further, obtained materials were monitored for 390 days and characterized using scanning electron microscopy, UV-VIS, and transmission electron microscopy.

Efficient Detection of 2,6-Dinitrophenol with Silver Nanoparticle-Decorated Chitosan/SrSnO3 Nanocomposites by Differential Pulse Voltammetry

Herein, an ultra-sonication technique followed by a photoreduction technique was implemented to prepare silver nanoparticle-decorated Chitosan/SrSnO₃ nanocomposites (Ag-decorated Chitosan/SrSnO₃ NCs), and they were successively used as electron-sensing substrates coated on a glassy carbon electrode (GCE) for the development of a 2,6-dinitrophenol (2,6-DNP) efficient electrochemical sensor. The synthesized NCs were characterized in terms of morphology, surface composition, and optical properties using FESEM, TEM, HRTEM, BET, XRD, XPS, FTIR, and UV-vis analysis. Ag-decorated Chitosan/SrSnO₃ NC/GCE fabricated with the conducting binder (PEDOT:PSS) was found to analyze 2,6-DNP in a wide detection range (LDR) of 1.5~13.5 µM by applying the differential pulse voltammetry (DPV) approach. The 2,6-DNP sensor parameters, such as sensitivity (54.032 µA µM^-1 cm^-2), limit of detection (LOD; 0.18 ± 0.01 µM), limit of quantification (LOQ; 0.545 µM) reproducibility, and response time, were found excellent and good results. Additionally, various environmental samples were analyzed and obtained reliable analytical results. Thus, it is the simplest way to develop a sensor probe with newly developed nanocomposite materials for analyzing the carcinogenic contaminants from the environmental effluents by electrochemical approach for the safety of environmental and healthcare fields in a broad scale.

A Critical Review of Analytical Applications of Chitosan as a Sustainable Chemical with Functions Galore

Biomass and biowastes stand as sustainable and cost-effective environmentally benign alternative feedstock. Chitosan is a biocompatible, bioactive, and biodegradable biopolymer derived from chitin to achieve eight aspects out of the 12 green chemistry principles. Chitosan got significant attention in several fields including chemical analysis, in addition to chemical functionally, which enabled its use as adsorbent and its structural crosslinking using various crosslinkers. The physicochemical, technological, and optical properties of chitosan have been extensively exploited in analysis. Mainly, deacetylation degree and molecular weight are controlling its properties and hence controlling its functions. This review presents a structure, properties, and functions relationships of chitosan. It also aims to provide an overview of the different functions that chitosan can serve in each analytical technique such as supporting matrix, catalyst…etc. The contribution of chitosan in improving the ecological performance is discussed in each technique.

In Situ Growth of Silver Nanoparticles on Chitosan Matrix for the Synthesis of Hybrid Electrospun Fibers: Analysis of Microstructural and Mechanical Properties

A viable alternative for the next generation of wound dressings is the preparation of electrospun fibers from biodegradable polymers in combination with inorganic nanoparticles. A poly(vinyl alcohol)-chitosan-silver nanoparticles (PVA-CTS-Ag NPs) system has been developed for antimicrobial and wound healing applications. Here, the preparation of PVA-CTS-Ag electrospun fibers using a two-step process is reported in order to analyze changes in the microstructural, mechanical, and antibacterial properties and confirm their potential application in the biomedical field. The Ag nanoparticles were well-dispersed into the chitosan matrix and their cubic structure after the electrospinning process was also retained. The Ag NPs displayed an average diameter of ~33 nm into the CTS matrix, while the size increased up to 213 nm in the PVA-CTS-Ag(NPs) fibers. It was observed that strong chemical interactions exist between organic (CTS) and inorganic phases through nitrogenous groups and the oxygen of the glycosidic bonds. A defect-free morphology was obtained in the PVA-CTS-Ag NPs final fibers with an important enhancement of the mechanical properties as well as of the antibacterial activity compared with pure PVA-CTS electrospun fibers. The results of antibacterial activity against E. coli and S. aureus confirmed that PVA-CTS-Ag(NPs) fibers can be potentially used as a material for biomedical applications.

Metal nanoparticles and its application on phenolic and heavy metal pollutants

The perpetual exposure of several manmade materials and their activities such as urbanization, industrialization, transportation, mining, construction, petroleum refining, manufacturing, preservatives, disinfectants etc., release various pollutants like organic, inorganic, and heavy metals which pollute the air, water, and soil. This poses various environmental issues which are relevant to the ecosystem and human wellbeing that intensify the implementation of new expedient treatment technologies. Likewise, phenolic and heavy metal pollutants find their way into the environment. These phenolic and heavy metals are toxic to the liver, heart and carcinogenic. Therefore, the removal of these kinds of pollutants from the environment is a highly challenging issue. As conventional treatment technologies have consequent drawbacks, new interests have been developed to remediate and remove pollutants from the ecosystem using metal nanoparticles (MPNs). To date, many researchers all over the world have been investigating novel approaches to enhance various remediation application technologies. One such approach that the researchers are constantly showing interest in is the use of nanomaterials with potential applications towards the environment. In this regard, MPNs like Copper (Cu), Nickel (Ni), Palladium (Pd), Gold (Au), Silver (Ag), Platinum (Pt), Titanium (Ti), and other nano metals are serving as a suitable agent to eliminate emerging contaminants in various fields, particularly in the removal of phenolic and heavy metal pollutants. This chapter discusses the mechanism and application of various MPNs in eliminating various phenolic and heavy metal pollutants from the environment.

Fabrication of fluorescence sensor based on molecularly imprinted polymer on amine-modified carbon quantum dots for fast and highly sensitive and selective detection of tannic acid in food samples

Developing a rapid and accurate method for tannic acid (TA) detection and measurement is necessary due to its extensive applications in the food industry. In this work, a fluorescence sensor with a low limit of detection was synthesized for TA for the first time. First, amine-modified carbon quantum dots (a-CQDs) with high-quantum yield were synthesized by the hydrothermal method. A layer of molecularly imprinted polymer (MIP) was then placed on a-CQDs by the surface printing method to increase the sensor selectivity. The mechanism of TA detection by the prepared a-CQDs/MIPs was quenching the fluorescence intensity of a-CQDs in the presence of TA due to the transfer of electrons from the TA to the a-CQDs. The linear range of the sensor response was at the TA concentration of 1-200 nmol L^-1 and its detection limit was 0.6 nmol L^-1 under optimal conditions. Finally, the sensor was used to measure TA in grape juice, green tea, and black tea samples using the recovery method. Recovery values between 97.4 and 103.6% and RSDs less than 3.8% indicated the high potential of the prepared sensor for TA analysis in complex food samples.

Synthesis and characterization of chitosan silver nanoparticle decorated with benzodioxane coupled piperazine as an effective anti-biofilm agent against MRSA: A validation of molecular docking and dynamics

Biomaterial research has improved the delivery and efficacy of drugs over a wide range of pharmaceutical applications. The objective of this study was to synthesize benzodioxane coupled piperazine decorated chitosan silver nanoparticle (Bcp*C@AgNPs) against methicillin-resistant Staphylococcus aureus (MRSA) and to assess the nanoparticle as an effective candidate for antibacterial and anti-biofilm care. Antibacterial activity of the compound was examined and minimum inhibitory concentration (MIC) was observed at (10.21 ± 0.03 ZOI) a concentration of 200 μg/mL. The Bcp*C@AgNPs interferes with surface adherence of MRSA, suggesting an anti-biofilm distinctive property that is verified for the first time by confocal laser microscopic studies. By ADMET studies the absorption, distribution, metabolism, excretion and toxicity of the compound was examined. The interaction solidity and the stability of the compound when surrounded by water molecules were analyzed by docking and dynamic simulation analysis. The myoblast cell line (L6) was considered for toxicity study and was observed that the compound exhibited less toxic effect. This current research highlights the biocidal efficiency of Bcp*C@AgNPs with their bactericidal and anti-biofilm properties over potential interesting clinical trial targets in future.

Investigation of the traditional organic vinegars by UV-VIS spectroscopy and rheology techniques

Optical, rheological and metabolic properties of the apple, hawthorn, artichoke, grape, rosehip and blackberry organic vinegar produced by deep culture method (handmade traditional method) were analysed using UV-Vis spectroscopy and rheology techniques. Flow behaviours for all samples were analysed in the shear rate range of 10^-3 to 10³ 1/s and in frequency range of 10^-3 to 10³rad/s, respectively. Absorption spectra for six organic vinegars was observed two peaks around 215 and 285nm due to the presence of phenolic compounds and organic acids such as acetic. The effects of optical transitions of organic molecules on the absorption coefficient values for vinegars were determined. Optical energy band gaps of all samples were found to be consistent with Planck's radiation approach known as Rayleigh-Jeans law and Tauc law. The rheological/flow properties of the all vinegars were found to be relevant with non-Newtonian flow behaviour and Ostwald-de Waele model. From the results of optical and rheological analysis, which determines the quantity and quality characteristics of all organic vinegars, it was concluded that these vinegars are in a level that people can drink easily.

Fabrication of noble metal nanoparticles decorated on one dimensional hierarchical polypyrrole@MoS2 microtubes

Herein, we present a facile strategy to fabricate noble metal (Ag, Au, Pd) decorated on PPy@MoS₂ microtubes. As a proof of application, the ternary PPy@MoS₂@Au hybrids reveal excellent enzyme-like catalytic performance.

Injectable and Conductive Granular Hydrogels for 3D Printing and Electroactive Tissue Support

Conductive hydrogels are attractive to mimic electrophysiological environments of biological tissues and toward therapeutic applications. Injectable and conductive hydrogels are of particular interest for applications in 3D printing or for direct injection into tissues; however, current approaches to add conductivity to hydrogels are insufficient, leading to poor gelation, brittle properties, or insufficient conductivity. Here, an approach is developed using the jamming of microgels to form injectable granular hydrogels, where i) hydrogel microparticles (i.e., microgels) are formed with water-in-oil emulsions on microfluidics, ii) microgels are modified via an in situ metal reduction process, and iii) the microgels are jammed into a solid, permitting easy extrusion from a syringe. Due to the presence of metal nanoparticles at the jammed interface with high surface area in this unique design, the granular hydrogels have greater conductivity than non-particle (i.e., bulk) hydrogels treated similarly or granular hydrogels either without metal nanoparticles or containing encapsulated nanoparticles. The conductivity of the granular hydrogels is easily modified through mixing conductive and non-conductive microgels during fabrication and they can be applied to the 3D printing of lattices and to bridge muscle defects. The versatility of this conductive granular hydrogel will permit numerous applications where conductive materials are needed.

Environmentally Benign Carbon Nanodots Prepared from Lemon for the Sensitive and Selective Fluorescence Detection of Fe(III) and Tannic Acid

Photoluminescent carbon nanodots (CNDs) were prepared using a biocarbon source of lemon extract. The obtained CNDs are of spherical shape and are enriched with the carboxylic acid fucntionalities. CNDs exhibited a fluorescence emission at 445 nm and unveiled blue luminescence in ultraviolet excitation. The influences of pH and ionic strength toward the stability of CNDs were investigated in detail and the obtained stability authenticates their applicability in different environmental conditions. The competitive binding of Fe³⁺ with CNDs quenches the fluorescence behavior of CNDs and was further quenched with the selective complex formation of Fe³⁺ with tannic acid (TA). The interference experiments specified that CNDs-Fe³⁺ assembly selectively detected TA and the co-existing molecules have not influenced the quenching effect of TA with CNDs-Fe³⁺. The analytical reliability of constructed sensor was validated from the recovery obtained in the range of 91.66-107.02% in real samples. Thus the low cost and environmentally benign CNDs prepared from natural biomass provide new avenues in the fluorescence detection of biologically significant metal ions and biomolecules, facilitating their competency in on-site applications of real environmental samples.

Microwave-assisted synthesis of polyamine-functionalized carbon dots from xylan and their use for the detection of tannic acid

A facile and straightforward microwave-assisted method was used to prepare polyamine-functionalized carbon dots (CDs) from a precursor comprising renewable xylan and branched polyethyleneimine (BPEI). The as-prepared BPEI-CDs were monodispersed sphere particles with an average diameter of about 8.62 nm, and exhibited excellent fluorescent property and high stability, as well as excitation-independent emission behavior. Furthermore, it is attractive that the BPEI-CDs can be used as novel fluorescent probes for detecting tannic acid (TA) sensitively and selectively. At the optimum condition, the TA detection system was established in water solution and ethanol solution with a dynamic range from 0.1 to 5 μM, and their detection limit of 36.8 nM and 44.9 nM were also determined, respectively. Most importantly, the BPEI-CDs-based sensors can be successfully applied to detect TA in real lake water and white wine samples, suggesting the low-cost and excellent BPEI-CDs are potential suitable for TA detection in practical application.

Nitrogen-doped fluorescent carbon dots for highly sensitive and selective detection of tannic acid

Herein, a facile approach for highly sensitive and selective detection of tannic acid (TA) was proposed with the nitrogen-doped fluorescent carbon dots (NCDs) as a novel fluorescent probe, using sodium citrate and aminopyrazine as precursors. The as-synthesized NCDs exhibited multiple advantages including high quantum yield (11.8%), good water solubility and satisfactory stability. In addition, the NCDs displayed excitation-independent emission behavior with fluorescence emission peak remaining at 389 nm under excitation of 270-350 nm. Significantly, the fluorescence quenching of as-fabricated NCDs was observed with the increasing TA concentration, and the calibration curve displayed a wide linear region ranging from 0.40 to 9.0 μmol L^-1 with a detection limit of 0.12 μmol L^-1. This fluorescent probe also performed well in determining TA in beer samples with average recoveries of TA ranging from 96.1% to 104.4% and the relative standard deviation less than 5%, which provided a reliable, rapid and simple method to determine TA in real samples. Thus, this method offered a valuable insight for its practical applications.

Green synthesis of polysaccharide-based inorganic nanoparticles and biomedical aspects

Biologically mediated inorganic nanoparticles (NPs) are considered as a green, cheap, and environmental-friendly materials, which connect the nanotechnology and biomedical sciences. Metallic NPs such as gold and silver NPs, synthesized using natural materials are an important branch of inorganic NPs with catalytic functionalities and a diverse range of biomedical applications such as antimicrobial application. Polysaccharides are excellent candidates to stabilize and control the size of NPs during the synthesis process. These polymers possess multiple binding sites, which facilitate attachment to the metal surface. As a result, polysaccharides can effectively create an organic-inorganic network of the metal NPs and confer a significant protection against aggregation and chemical modifications. This chapter discusses the methods of the preparation of polysaccharide-mediated NPs and reviews various types and diverse applications for these novel materials.

Killing Two Birds with One Stone: Coating Ag NPs Embedded Filter Paper with Chitosan for Better and Durable Point-of-Use Water Disinfection

In this study, porous chitosan (CS) coated Ag NPs embedded filter paper (CAEFP) was fabricated for point-of-use water disinfection application. Thanks for the presence of CS coating, the tensile strength of the CAEFP in wet condition was found to be 1.8 MPa, 700% increase compared with where there was no CS coating, making it much more durable. In addition, the coating with CS could greatly boost the Ag NPs loading without worrying about the excessive release of Ag into the treated water, thereby significantly improving the bactericidal efficiency but still be safe to drink in terms of Ag release. Furthermore, by controlling the amount of CS used, the flow rate and bactericidal efficiency of the CAEFP could be manipulated (customized). When the CS content increased from 0.5 to 2.0 wt %, the flow rate of CAEFP would drop from 9.3 to 0.53 L/min/m², and the bactericidal efficiency against Escherichia coli and Bacillus subtilis could improve from 4 and 3.6 to 4.9 and 4.8 log reduction, respectively. At optimum condition, the total Ag in treated water by CAEFP was below 45 μg/L, only 1/10 of that from Ag NPs loaded filter paper without CS coating, half of the WHO drinking water requirement (<100 μg/L). Natural surface water samples were used for the demonstration of the bactericidal performance of the CAEFP. Both the total bacterial and E. coli counts met the WHO standard.

Optical assays based on colloidal inorganic nanoparticles

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

Simple and rapid silver nanoparticles based antioxidant capacity assays: Reactivity study for phenolic compounds

A single-step, rapid (10 min), sensitive silver nanoparticles (AgNPs) based spectrophotometric method for antioxidant capacity (AOC) assay has been developed. The assay is based on the ability of natural polyphenols to reduce Ag(I) and stabilize the produced AgNPs(0) at room temperature. Localized surface plasmon resonance (LSPR) of AgNPs at ≈420 nm is then measured. Using different conditions of pH (8.4) and temperature (45 °C) a further assay based on the production of AgNPs with selectivity for flavonols was also developed. The reactivity of the two AgNPs based assays vs. 15 polyphenols belonging to different chemical classes and 9 different samples has been studied and compared with ABTS, Folin and AuNPs based methods for AOC. The proposed assays had good reproducibility (RSD ≤ 13) and are simple, sensitive and cost effective. Moreover, used in conjunction with the classical AOC assays, can improve the information on the polyphenolic pool of food samples.

Facile preparation of silver nanoparticle decorated chitosan cryogels for point-of-use water disinfection

In this study, silver nanoparticle decorated chitosan (CS/Ag NP) cryogels were fabricated through a simple freeze-drying process for point-of-use (POU) water disinfection. The CS/Ag NP cryogels showed high porosity, good mechanical properties, an excellent water absorption capability, and most importantly, an efficient bactericidal feature. The absorption capacity for water was found to be 47g/g, approximately 90% of which was recovered by simple squeezing. Three different sizes of Ag NPs were compared regarding their bactericidal capability against both Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis). Under optimum conditions, a 3 log reduction of bacteria was observed by holding the bacteria suspension (10⁸ colony forming units (cfu)/mL) in the cryogels for 5min. Reduction was further increased to a 4 log when the contact time was doubled. The silver content in the cryogels was found to only be 7.5mg/g. Furthermore, the total Ag in processed water was found to only be 22μg/L, half of the safety limit set by China (<50μg/L). The bactericidal effectiveness of the material for real surface water samples was also demonstrated by treating water samples with different water quality matrices, including lake water and sewage water samples. In all three treated lake water samples, both the total bacteria and E. coli met the regulations for drinking water in China (<100cfu/mL for total bacteria and negative for E. coli). CS/Ag NP cryogels can be used for drinking water disinfection during disaster relief and in contingency water supply applications.

Preparation, Characterization and Application of Polysaccharide-Based Metallic Nanoparticles: A Review

Polysaccharides are natural biopolymers that have been recognized to be the most promising hosts for the synthesis of metallic nanoparticles (MNPs) because of their outstanding biocompatible and biodegradable properties. Polysaccharides are diverse in size and molecular chains, making them suitable for the reduction and stabilization of MNPs. Considerable research has been directed toward investigating polysaccharide-based metallic nanoparticles (PMNPs) through host⁻guest strategy. In this review, approaches of preparation, including top-down and bottom-up approaches, are presented and compared. Different characterization techniques such as scanning electron microscopy, transmission electron microscopy, dynamic light scattering, UV-visible spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and small-angle X-ray scattering are discussed in detail. Besides, the applications of PMNPs in the field of wound healing, targeted delivery, biosensing, catalysis and agents with antimicrobial, antiviral and anticancer capabilities are specifically highlighted. The controversial toxicological effects of PMNPs are also discussed. This review can provide significant insights into the utilization of polysaccharides as the hosts to synthesize MPNs and facilitate their further development in synthesis approaches, characterization techniques as well as potential applications.

Novel imidazole fluorescent poly(ionic liquid) nanoparticles for selective and sensitive determination of pyrogallol

This paper reports novel imidazole fluorescent poly(ionic liquid) nanoparticles (FPILNs) of poly(1-[(4-methyphenyl)methyl]-3-vinyl-imidazolium bromide (poly([MVI]Br) for selective and sensitive determination of pyrogallol. An imidazole ionic liquid of 1-[(4-methyphenyl)methyl]-3-vinyl-imidazolium bromide ([MVI]Br) was synthesized and used as the only monomer to obtain poly([MVI]Br) possessing phenyl fluorophores using a radical polymerization technique. The obtained poly([MVI]Br) can form nanoparticles in water. Scanning electron microscopy and dynamic light scattering results revealed majority of poly([MVI]Br) FPILNs with diameters ranging from 40 to 400nm. Although [MVI]Br showed weak fluorescence intensity, poly([MVI]Br) FPILNs exhibited strong fluorescence intensity with a quantum yield of 0.192, which is attributed to the presence of significant number of phenyl fluorophores and rigid construction. The selective and sensitive determination of pyrogallol was achieved through fluorescence quenching of poly([MVI]Br) FPILNs, and the quenching was attributed to the oxidation of poly([MVI]Br) FPILNs by O₂˙¯ produced by pyrogallol autoxidation. The poly([MVI]Br) FPILNs-based sensor demonstrated a good linear relationship between the extent of fluorescence quenching and the concentration of pyrogallol in a range of 0.05 - 10.0μM, achieving a detection limit of 0.01μM. Furthermore, the poly([MVI]Br) FPILNs-based assay detected pyrogallol in environmental water samples, suggesting its potential to be applied for practical purposes.

Chiral recognition of tryptophan enantiomers using chitosan-capped silver nanoparticles: Scanometry and spectrophotometry approaches

A new, fast and inexpensive colorimetric sensor was developed for chiral recognition of tryptophan enantiomers using chitosan-capped silver nanoparticles. The function of the sensor was based on scanometry and spectrophotometry of the colored product of a reaction solution containing a mixture of chitosan-capped silver nanoparticles, phosphate buffer and tryptophan enantiomers. The image of the colored solution was taken using the scanometer and the corresponding color values were obtained using Photoshop software which subsequently were used for optimization of the experimental parameters as the analytical signal. Two types of color values system were investigated: RGB (red, green and blue values) and CMYK (cyan, magenta, yellow and black values). The color values indicated that L-tryptophan had better interaction than D-tryptophan with chitosan-capped silver nanoparticles. A linear relationship between the analytical signal and the concentration of L-tryptophan was obtained in the concentration range of 1.3 × 10^-5-4.6 × 10^-4molL^-1. Detection limits, were obtained to be 2.1 × 10^-6, 2.4 × 10^-6 and 3.8 × 10^-6molL^-1 for L-tryptophan based on R (red), G (green) and B (blue) values, respectively.

Colorimetric detection of biothiols based on aggregation of chitosan-stabilized silver nanoparticles

We have described a simple and reliable colorimetric method for the sensing of biothiols such as cysteine, homocysteine, and glutathione in biological samples. The selective binding of chitosan capped silver nanoparticles to biothiols induced aggregation of the chitosan-Ag NPs. But the other amino acids that do not have thiol group cannot aggregate the chitosan-Ag NPs. Aggregation of chitosan-Ag NPs has been confirmed with UV-vis absorption spectra, zeta potential and transmission electron microscopy images. Under optimum conditions, good linear relationships existed between the absorption ratios (at A₅₀₀/A₄₁₅) and the concentrations of cysteine, homocysteine, and glutathione in the range of 0.1-10.0μM with detection limits of 15.0, 84.6 and 40.0nM, respectively. This probe was successfully applied to detect these biothiols in biological samples (urine and plasma).

Current advancements of magnetic nanoparticles in adsorption and degradation of organic pollutants

Nanotechnology is a fast-emerging field and has received applications in almost every field of life. Exploration of new synthetic technologies for size and shape control of nanomaterials is getting immense consideration owing to their exceptional properties and applications. Magnetic nanoparticles (MNPs) are among the most important group of nanoparticles thanks to their diverse applications in medical, electronic, environmental, and industrial sectors. There have been numerous synthetic routes of MNPs including thermal decomposition, co-precipitation, microemulsion, microwave assisted, chemical vapor deposition, combustion synthesis, and laser pyrolysis synthesis. The synthesized MNPs have been successfully applied in medical fields for therapy, bioimaging, drug delivery, and so on. Among environmental aspects, there has been great intimidation of organic pollutants in air and water. Utilization of various wastes as adsorbents has removed 80 to 99.9% of pollutants from contaminated water. MNPs as adsorbents compared to coarse-grained counterparts have seven times higher capacity in removing water pollutants and degrading organic contaminants. This study is focused to introduce and compile various routes of MNP synthesis together with their significant role in water purifications and degradation of organic compounds. The review has compiled recent investigation, and we hope it will find the interest of researchers dealing with nanoparticles and environmental research. Graphical abstract Synthesis and applications of magnetic nanoparticles.

Development of a new colorimetric assay for detection of bisphenol-A in aqueous media using green synthesized silver chloride nanoparticles: experimental and theoretical study

In the present study, a cost-effective, green and simple synthesis method was applied for preparation of stable silver chloride nanoparticles (AgCl-NPs). The method was done by forming AgCl-NPs from Ag+ ions using aqueous extract of brown algae (Sargassum boveanum) obtained from the Persian Gulf Sea. This extract served as capping agent during the formation of AgCl-NPs. Creation of AgCl-NPs was confirmed by UV-visible spectroscopy, powder X-ray diffraction, energy-dispersive X-ray spectroscopy, and high-resolution transmission electron microscopy, while the morphology and size analyses were characterized using high-resolution transmission electron microscopy and dynamic light scattering. After optimization of some experimental conditions, particularly pH, a simple and facile system was developed for the naked-eye detection of bisphenol-A. Moreover, a theoretical study of AgCl interaction with bisphenol-A was performed at the density functional level of theory in both gas and solvent phases. Theoretical results showed that electrostatic and van der Waal interactions play important roles in complexation of bisphenol-A with AgCl-NPs, which can lead to aggregation of the as-prepared AgCl-NPs and results in color change from specific yellow to dark purple, where a new aggregation band induced at 542 nm appears. The absorbance at 542 nm was found to be linearly dependent on the bisphenol-A concentration in the range of 1 × 10-6-1 × 10-4 M, with limit of detection of 45 nM. In conclusion, obtained results from the present study can open up an innovative application of the green synthesis of AgCl-NPs using brown algae extract as colorimetric sensors.

Resonance Rayleigh scattering technique for simple and sensitive analysis of tannic acid with carbon dots

Carbon dots (CDs) are raising a substantial amount of attention owing to their many unique and novel physicochemical properties. Herein one-pot synthesized CDs, to the best of our knowledge, were first served as the robust nanoprobe for detection tannic acid (TA) based on resonance Rayleigh scattering technique. The as-prepared CDs can combine with TA via hydrogen bond, resulting in remarkable enhancement of scattering signal with no changes in the fluorescence of CDs. Therefore, a novel protocol for TA determination was established and this strategy allowed quantitative detection of TA in the linear range of 0.2-10.0μmolL^-1 with an excellent detection limit of 9.0nmolL^-1. Moreover, the CDs based nanoprobe can be applied to the determination of TA in water sample with satisfactory results. Our study can potentially influence our current views on CDs and particularly impressive and offers new insights into application of CDs beyond the traditional understanding of CDs.