Insights into the physico-chemical and biological characterization of sodium lignosulfonate - silver nanosystems designed for wound management

Chronic wounds represent one of the complications that might occur from the disruption of wound healing process. Recently, there has been a rise in interest in employing nanotechnology to develop novel strategies for accelerating wound healing. The aim of the present study was to use a green synthesis method to obtain AgNPs/NaLS systems useful for wounds management and perform an in-depth investigation of their behavior during and post-synthesis as well as of their biological properties. The colloids obtained from silver nanoparticles (AgNPs) and commercial sodium lignosulfonate (NaLS) in a single-pot aqueous procedure have been fully characterized by UV-Vis, FT-IR, DLS, TEM, XRD, and XPS to evaluate the synthesis efficiency and to provide new insights in the process of AgNPs formation and NaLS behavior in aqueous solutions. The effects of various concentrations of NaLS (0-16 mg/mL) and AgNO3 (0-20 mM) and of two different temperatures on AgNPs formation have been analyzed. Although the room temperature is feasible for AgNPs synthesis, the short mixing at 70 °C significantly increases the speed of nanoparticle formation and storage stability. In all experimental conditions AgNPs of 20-40 nm in size have been obtained. The antimicrobial activity assessed quantitatively on clinical and reference bacterial strains, both in suspension and biofilm growth state, revealed a broad antimicrobial spectrum, the most intensive inhibitory effect being noticed against Pseudomonas aeruginosa and Escherichia coli strains. The AgNP/NaLS enhanced the NO extracellular release, potentially contributing to the microbicidal and anti-adherence activity by protein oxidation. Both AgNP/NaLS and NaLS were non-hemolytic (hemolytic index<5%, 2.26 ± 0.13% hemolysis) and biocompatible (102.17 ± 3.43 % HaCaT cells viability). The presence of AgNPs increased the antioxidative activity and induced a significant cytotoxicity on non-melanoma skin cancer cells (62.86 ± 8.27% Cal-27 cells viability). Taken together, all these features suggest the multivalent potential of these colloids for the development of novel strategies for wound management, acting by preventing infection-associated complications and supporting the tissue regeneration.

The role of pH-induced tautomerism of polyvinylpyrrolidone on the size, stability, and antioxidant and antibacterial activities of silver nanoparticles synthesized using microwave radiation

Tautomerism alters the structure and properties of materials, which can be exploited to control their chemical and biological activities. The role of pH-induced tautomerism of polyvinylpyrrolidone (PVP) was determined by measuring the size, stability, and antioxidant and antibacterial properties of microwave synthesized-silver nanoparticles (AgNPs). TEM and XRD analyses confirmed the formation of face-centered cubic silver nanoparticles. PVP stabilized the AgNPs by interaction with the carbonyl or hydroxyl groups depending on the tautomerization under different pH conditions. At pH 4, PVP was stable in the keto tautomer, stabilizing Ag through electron donation of oxygen atoms in the carbonyl group, producing smaller AgNPs with a higher zeta potential. At pH 7 and 9, the enol tautomer PVP stabilized the AgNPs via oxygen atoms in the hydroxyl group, forming large nanoparticles. The keto form of PVP improved the stability and antioxidant and antibacterial properties of AgNPs compared with the enol form. This study also excluded the antioxidant contribution of PVP via hydrogen donation to free radicals. A facile method for controlling the size of AgNPs by adapting the pH-induced tautomerism of PVP that affects their stability and antioxidant and antibacterial activities is thus reported.

Assembly of bimetallic (Au-Ag)FON composite films at liquid/solid interfaces and their tunable optical properties

The regular structure provided by two-dimensional (2D) structural colloidal crystals is widely accepted to provide an ideal template that ensures that plasmonic bimetallic composite nanostructures are uniform. Herein, we report an effective method for fabricating bimetallic Au-Ag composite films loaded on the surfaces of 2D polystyrene@polyacrylic acid (PS@PAA) colloidal crystals. PS@PAA particles coated with uniform Ag particle layers (AgFON) were produced by a simple and effective sputtering-deposition technique, after which the galvanic replacement (GR) reaction was used to produce a bimetallic (Au-Ag)FON composite film at the liquid/solid interface in aqueous HAuCl₄. The morphology and relative contents of the bimetallic (Au-Ag)FON composite film can be regulated by changing the kinetic factors that control the GR reaction, including the concentration and pH of the HAuCl₄ solution, and the reaction time. We demonstrated that the fabricated bimetallic (Au-Ag)FON composite has localized surface plasmon resonance (LSPR) properties that can be regulated by varying the composite structure and Ag/Au composition. On the one hand, the regular 2D colloidal crystal structure provides an ideal template for preparing Au-Ag composite films, which ensures that the optical signals of plasmonic Au-Ag composite films are reproducible. On the other hand, the synergy between Ag and Au in the bimetallic alloy composite film ensures stable and tunable LSPR performance. Furthermore, the prepared 2D ordered (Au-Ag)FON Au-Ag bimetallic material is expected to be used in sensing and catalysis applications.

Structural crystallisation of crosslinked 3D PEDOT:PSS anisotropic porous biomaterials to generate highly conductive platforms for tissue engineering applications

An emerging class of materials finding applications in biomaterials science - conductive polymers (CPs) - enables the achievement of smarter electrode coatings, piezoresistive components within biosensors, and scaffolds for tissue engineering. Despite their advances in recent years, there exist still some challenges which have yet to be addressed, such as long-term stability under physiological conditions, adequate long-term conductivity and optimal biocompatibility. Additionally, another hurdle to the use of these materials is their adaptation towards three-dimensional (3D) scaffolds, a feature that is usually achieved by virtue of applying CPs as a functionalised coating on a bulk material. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is by far one of the most promising CPs in terms of its stability and conductivity, with the latter capable of being enhanced via a crystallisation treatment using sulphuric acid. In this work, we present a new generation of 3D electroconductive porous biomaterial scaffolds based on PEDOT:PSS crosslinked via glycidoxypropyltrimethoxysilane (GOPS) and subjected to sulphuric acid crystallisation. The resultant isotropic and anisotropic crystallised porous scaffolds exhibited, on an average, a 1000-fold increase in conductivity when compared with the untreated scaffolds. Moreover, we also document a precise control over the pore microarchitecture, size and anisotropy with high repeatability to achieve both isotropic and aligned scaffolds with mechanical and electrical anisotropy, while exhibiting adequate biocompatibility. These findings herald a new approach towards generating anisotropic porous biomaterial scaffolds with superior conductivity through a safe and scalable post-treatment.

Magnetic polymer bowl for enhanced catalytic activity and recyclability

This work introduces the fabrication of a magnetic polymer bowl for enhanced catalytic activity and recyclability, which involves the synthesis of silica-coated Fe3O4 magnetic clusters, seeded dispersion polymerization using the magnetic clusters, and transformation into a bowl-like structure via a phase separation route. The additional treatment with tannic acid (TA) on the bowls allows the in situ formation of silver nanoparticles (AgNPs) on their surfaces. The openness and larger surface area of the bowls, as compared with those of other structured particles, such as spheres and flowers, enable a considerably higher immobilization of AgNPs, thus leading to an excellent catalytic reduction for 4-nitrophenol (4-NP), methylene blue (MB), and rhodamine B. Furthermore, the strong magnetic response originating from the magnetic clusters inside the bowls endows a good magnetic recovery and an excellent reusability for the repeated reduction of the organic dyes without loss of catalytic activity.

Preparation and growth-promoting effect of selenium nanoparticles capped by polysaccharide-protein complexes on tilapia

BACKGROUND

Compared with traditional inorganic and organic selenium compounds, nano-selenium exhibited higher biological safety and nutritional potency. However, the biological efficacy of nano-selenium has not been comprehensively and accurately evaluated due to its dispersion instability.

RESULTS

In this study, novel selenium nanoparticles (SeNPs) with high dispersion stability were successfully prepared using a polysaccharide-protein complex (PSP) as the capping agent. This was isolated from abalone viscera. The average particle size and zeta potential of polysaccharide-protein complex selenium nanoparticles (PSP-SeNPs) were 63.33 nm, and -37.1 mV, respectively. The SeNPs were firmly capped by PSP through SeO and SeN bonds, as demonstrated by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy. Due to this capping, the dispersion of PSP-SeNPs remained stable for 12 months at 4 °C, as evidenced by visual inspection and multiple light scattering. Furthermore, PSP-SeNPs imparted an excellent growth-promoting effect on tilapia. The FBW, WGR, and SGR values of tilapia juveniles fed with PSP-SeNPs supplemented diets (0.5-4.5 mg/kg) were significantly higher than those of the control (P < 0.05). A weight gain rate of 4.1%-43.4% and specific growth rate of 0.15%-1.74% were obtained in tilapia during 45-day feeding.

CONCLUSIONS

The use of marine viscera polysaccharides is a promising, green method for the synthesis of selenium nanoparticles. There are good opportunities for the application of the synthesized PSP-SeNPs in the life sciences. © 2020 Society of Chemical Industry.

DNA-induced assembly of gold nanoprisms and polystyrene beads into 3D plasmonic SERS substrates

The utilization of nanoparticle-polymer bead hybrid nanostructures as a SERS substrate depends on the control of the deposition, density, and distribution of nanoparticles on the bead surface. Here we demonstrate the fabrication of a large area SERS substate via a two- step DNA mediated assembly of gold nanoprisms and polystyrene (PS) beads into a large ensemble of beads that are densely coated with nanoprisms. First, nanoprisms are loaded on PS beads through DNA hybridization. The close packed arrangement of anisotropic nanoprisms in different orientations on a bead surface results in a plasmonic substrate with a variable nanogap size ranging 1-20 nm. Nanoprisms-coated beads are then assembled into a large stack or aggregate of beads using a DNA-induced crystallization approach. Each aggregate consists of 20-50 nanoprisms-coated beads, leading to the formation a large area of three-dimensional SERS substrate with a high-density of hot spots for SERS enhancement. An excellent enhancement factor (EF) of [Formula: see text] and a very high detection sensitivity (up to 10^-10 M) are observed for the analysis of a probe molecule (Methylene blue) using the SERS substrate.

In situ dispersion of oil-based Ag nanocolloids by microdroplet coalescence and their applications in SERS detection

Monodispersity and size uniformity of the nanoparticles coated on film-like nanosensors are critical for detection efficiency.

Preparation and characterization of nano-sized PS@Pd core–shell architectures with a one-pot method

Monodispersed and nano-sized Pd (palladium) coated PS (polystyrene) core–shell architectures have been prepared successfully by a facile, green and fast one-pot method.

Au nanoparticles supported on magnetically separable Fe2O3–graphene oxide hybrid nanosheets for the catalytic reduction of 4-nitrophenol

A one-pot hydrothermal synthesis approach was developed to prepare FeSO₄·(H₂O)–graphene oxide (GO) nanosheets. Au nanoparticles were immobilized onto this support, giving Au/Fe₂O₃–GO nanocomposites.

Nanomaterials enhanced surface plasmon resonance for biological and chemical sensing applications

The main challenge for all electrical, mechanical and optical sensors is to detect low molecular weight (less than 400 Da) chemical and biological analytes under extremely dilute conditions. Surface plasmon resonance sensors are the most commonly used optical sensors due to their unique ability for real-time monitoring the molecular binding events. However, their sensitivities are insufficient to detect trace amounts of small molecular weight molecules such as cancer biomarkers, hormones, antibiotics, insecticides, and explosive materials which are respectively important for early-stage disease diagnosis, food quality control, environmental monitoring, and homeland security protection. With the rapid development of nanotechnology in the past few years, nanomaterials-enhanced surface plasmon resonance sensors have been developed and used as effective tools to sense hard-to-detect molecules within the concentration range between pmol and amol. In this review article, we reviewed and discussed the latest trend and challenges in engineering and applications of nanomaterials-enhanced surface plasmon resonance sensors (e.g., metallic nanoparticles, magnetic nanoparticles, carbon-based nanomaterials, latex nanoparticles and liposome nanoparticles) for detecting "hard-to-identify" biological and chemical analytes. Such information will be viable in terms of providing a useful platform for designing future ultrasensitive plasmonic nanosensors.