Rationally construction of 2D & 3D material on h-BN @ SnO2/TiO2 micro-sphere enables for photocatalytic debasement of textile cloth dyes in waste water treatment

Affordable and swiftly available h-BN@SnO2/TiO2 photocatalysts are being developed through an easy hydrothermally approach was used urea as boric acid precursors. With their constructed photo catalysts, the effect of h-BN@SnO2/TiO2 has been investigated under the assessment of Adsorption agents utilizing X-ray diffraction pattern (XRD), Scanning electron microscopy, Energy dispersive spectroscopic analysis (SEM/EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), and Burner Emit Teller (BET) isotherm testing methods, which also indicated that SnO2/TiO2 and h-BN have been tightly bound together. Because turquoise blue (TB) and Methyl orange (MO) fabric dyes can be found in the industrial wastewater being processed, the photo catalytic degradation process happens to be applied. According to the advantageous linkages of h-BN@SnO2/TiO2 photocatalysts, fantastic efficacy in breakdown towards hazardous compounds has been found. For the decomposition of Turquoise blue (TB) and Methyl orange (MO), the h-BN@SnO2/TiO2 catalysts proved the best performance stability (0.0386 min-1 and 1.524min-1) but were significantly 22 times quicker. Optical catalysis has additionally demonstrated extraordinary resilience and durability throughout five reprocessed efforts. On top of that, an approach enabling photocatalytic breakdown of harmful substances upon h-BN@SnO2/TiO2 has been presented.

Development of stable S-scheme 2D-2D g-C3N4/CdS nanoheterojunction arrays for enhanced visible light photomineralisation of nitrophenol priority water pollutants

The investigation focused on creating and studying a new 2D-2D S-scheme CdS/g-C3N4 heterojunction photocatalyst. Various techniques examined its structure, composition, and optical properties. This included XRD, XPS, EDS, SEM, TEM, HRTEM, DRS, and PL. The heterojunction showed a reduced charge recombination rate and more excellent stability, helping to lessen photocorrosion. This was due to photogenerated holes moving more quickly out of the CdS valence band. The interface between g-C3N4 and CdS favored a synergistic charge transfer. A suitable flat band potential measurement supported enhanced reactive oxygen species (ROS) generation in degrading 4-nitrophenol and 2-nitrophenol. This resulted in remarkable degradation efficiency of up to 99% and mineralization of up to 79%. The findings highlighted the practical design of the new 2D-2D S-scheme CdS/g-C3N4 heterojunction photocatalyst and its potential application in various energy and environmental settings, such as pollutant removal, hydrogen production, and CO2 conversion.

2D Bi2MoO6/Zn3V2O8 heterojunction photocatalyst for efficient photocatalytic reduction of CO2 to CO and CH4

Two-dimensional (2D) "face-to-face" heterojunctions promote interfacial charge transfer and separation in composite photocatalysts. Here, we report an efficient 2D/2D step-scheme (S-scheme) photocatalyst composed of Bi2MoO6/Zn3V2O8 (BMO/ZVO), which has been designed and prepared via the self-assembly of BMO and ZVO nanoflakes. The heterojunction with an optimized composition of 30% BMO/ZVO showed extended light absorption capacity and enhanced separation efficiency of photogenerated carriers. Density functional theory (DFT) calculation on work function and charge density revealed the presence of a built-in electric field at the interface region, which should facilitate the separation of photogenerated electron-hole pairs. This work showed that it is essential to select two photocatalysts with interlaced band arrangement and to fine-tune the heterojunction interface for the preparation of S-scheme heterojunctions to achieve high photocatalytic efficiency.

High-performance EMI shielding effectiveness of Fe3O4-3D rPC nanocomposites: a systematic optimization in the X-band region

In this work, the microwave absorption (MWA) performance of a Fe3O4-3D reduced porous carbon nanocomposite (3D rPC NC) in the X-band region is reported. Three different shields are fabricated by altering the ratio of Fe3O4 nanoparticles (NPs) and 3D rPC and evaluating their microwave (MW) shielding performance with appropriate in-wearing instruments due to their minimum thickness. The chemical interaction between Fe3O4 NPs and 3D rPC is examined from chemical composition analysis of Fe3O4-3D rPC (1 : 2 ratio), which is confirmed by the presence of the Fe-O-C bond in the O 1s spectrum obtained from XPS analysis and subsequent analysis using FESEM images. Furthermore, it is found from N2 adsorption/desorption analysis that 3D rPC possesses a huge surface area of 787.312 m2 g-1 and showcases a type-V isotherm (mesoporous and/or microporous) behavior. The dielectric and magnetic losses of Fe3O4-3D rPC with a 1 : 2 ratio (tan δεr = 1.27 and tan δμr = 5.03) are higher than those of Fe3O4 NPs, 3D rPC and their NCs due to its magnetic and electrical conducting pathways modifying the material's polarization and dipole moment. The lightweight, polymer-free Fe3O4-3D rPC (1 : 2) NCs with minimum thickness on the order of 0.5 mm exhibited a higher total shielding effectiveness (SET = 41.285 dB), and it effectively blocked 99.9963% of the transmittance due to electric and magnetic polarization resulting from the presence of a heterogeneous interface surface.

Facile Synthesis of gC3N4-Exfoliated BiFeO3 Nanocomposite: A Versatile and Efficient S-Scheme Photocatalyst for the Degradation of Various Textile Dyes and Antibiotics in Water

Water pollution engendered from textile dyes and antibiotics is a globally identified precarious concern that is causing dreadful risks to human health as well as aquatic lives. This predicament is escalating the quest to develop competent photocatalysts that can degrade these water pollutants under solar light irradiation. Herein, we report an efficient photocatalyst comprising a hierarchical structure by integrating the layered graphitic carbon nitride (gC3N4) with nanoflakes of exfoliated BiFeO3. The coexistence of these two semiconducting nanomaterials leads to the formation of an S-scheme heterojunction. This nanocomposite demonstrated its excellent photocatalytic activity toward the degradation of several textile dyes (Yel CL2R, Levasol Yellow-CE, Levasol Red-GN, Navy Sol-R, Terq-CL5B) and various antibiotics (such as tetracycline hydrochloride (TCH), ciprofloxacin (CPX), sulfamethoxazole (SMX), and amoxicillin (AMX)) under the simulated solar light irradiation. As this photocatalyst exhibits its versatile activity toward the degradation of several commercial dyes as well as antibiotics, this work paves the path to develop a reasonable, eco-benign, and highly efficient photocatalyst that can be used in the practical approach to remediate environmental pollution.

La-doped NiWO4 coupled with reduced graphene oxide for effective electrochemical determination of diphenylamine

Diphenylamine (DPA) is a harmful pesticide widely used to control post-harvest scald of fruits. In this study, rapid and sensitive determination of DPA was realized by the development of an effective electrochemical sensor, which was fabricated by coupling La-doped NiWO4 nanoparticles (La/NiWO4) with reduced graphene oxide (rGO), and the obtained rGO/La/NiWO4 nanocomposite was modified on glassy carbon electrodes (GCEs). The morphologies, structures and compositions were well characterized, and the effects of La doping and the introduction of rGO on the crystal structure and electrochemical performance were discussed. The incorporation of both La and rGO was found to enhance the active surface area and improve conductivity, resulting in the enhanced electrocatalytic performance of rGO/La/NiWO4/GCE, including a wide linear range (0.01-500 μM), a low detection limit (0.0058 μM) and high sensitivity (1.778 μA μM-1 cm-2). The fabricated sensor was further used for DPA detection in fresh apple extract to evaluate its practicality and demonstrated excellent recoveries ranging from 99.52 to 104.70%.

Enhanced osteogenesis on proantocyanidin-loaded date palm endocarp cellulosic matrices: A novel sustainable approach for guided bone regeneration

Developing inexpensive, biocompatible natural scaffolds that can support the differentiation and proliferation of stem cells has been recently emphasized by the research community to faster obtain the FDA approvals for regenerative medicine. In this regard, plant-derived cellulose materials are a novel class of sustainable scaffolding materials with high potentials for bone tissue engineering (BTE). However, low bioactivity of the plant-derived cellulose scaffolds restricts cell proliferation and cell differentiation. This limitation can be addressed though surface-functionalization of cellulose scaffolds with natural antioxidant polyphenols, e.g., grape seed proanthocyanidin (PCA)-rich extract (GSPE). Despite the various merits of GSPE as a natural antioxidant, its impact on the proliferation and adhesion of osteoblast precursor cells, and on their osteogenic differentiation is an as-yet unknown issue. Here, we investigated the effects of GSPE surface functionalization on the physicochemical properties of decellularized date (Phoenix dactyliferous) fruit inner layer (endocarp) (DE) scaffold. In this regard, various physiochemical characteristics of the DE-GSPE scaffold such as hydrophilicity, surface roughness, mechanical stiffness, porosity, and swelling, and biodegradation behavior were compared with those of the DE scaffold. Additionally, the impact of the GSPE treatment of the DE scaffold on the osteogenic response of human mesenchymal stem cells (hMSCs) was thoroughly studied. For this purpose, cellular activities including cell adhesion, calcium deposition and mineralization, alkaline phosphatase (ALP) activity, and expression levels of bone-related genes were monitored. Taken together, the GSPE treatment enhanced the physicochemical and biological properties of the DE-GSPE scaffold, thereby raising its potentials as a promising candidate for guided bone regeneration.

Construction of g-C3N4/CdS/BiVO4 ternary nanocomposite with enhanced visible-light-driven photocatalytic activity toward methylene blue dye degradation in the aqueous phase

Herein, the ternary CdS/BiVO₄/g-C₃N₄ (CBG) hybrid semiconductor photocatalyst was prepared via a hydrothermal technique. The synthesized photocatalysts were thoroughly characterized using powder XRD, XPS, FTIR, SEM, TEM, and UV-DRS to investigate the microstructural, morphological attributes, and optical properties. The photocatalytic activity of the ternary CBG hybrid semiconductor was assessed through the photodegradation of Methylene Blue (MB) aqueous dye under visible light. The outcomes exhibited that the CBG hybrid semiconductor showed excellent photocatalytic activity (about 94.5% after 120 min) compared to the results obtained with the pristine materials or the other composite (CdS/BiVO₄). The enhancement of photocatalytic activity can be due to the construction of heterojunctions among g-C₃N₄, CdS, and BiVO₄, which improves charge transfer efficiency and hence favors the degradation of organic dyes. Moreover, the as-prepared photocatalyst showed excellent stability after five cycles, indicating good stability and reusability. Subsequently, a possible photocatalytic mechanism was proposed based on the experimental results. The current investigation provides a promising strategy to promote photocatalytic activity to eliminate waterborne contaminants.

Hybridizing electron-mediated H5PMo10V2O40 with CdS/g-C3N4 for efficient photocatalytic performance of Z-scheme heterojunction in wastewater treatment

Photocatalytic technology has been considered as a promising method to alleviate environmental pollution owing to the dual characteristics of redox. The novel V-based H₅PMo₁₀V₂O₄₀ (HPA-2) photocatalyst with Z-scheme heterostructure was constructed. The energy level of HPA-2 matches well with CdS and g-C₃N₄ (CN) according to Mott-Schottky and UV-Vis diffused reflectance tests, which allows the efficient separation of photogenerated electrons. The optimized CdS/HPA-2/CN showed superior ability in Rhodamine B (RhB) degradation and reduction of Cr (Ⅵ) under visible light irradiation. The maximum rate constant reached 0.092 min^-1 for RhB degradation at 60 min and 0.260 min^-1 for Cr (Ⅵ) reduction at 20 min, respectively. The photocatalytic mechanism was analyzed by adding scavengers. The effect of active species for RhB degradation was determined as h⁺ > ·O₂^- > ·OH, while ·O₂^- and e^- were essential for the reduction of Cr (Ⅵ). Besides, cyclic tests exhibit excellent repeatability and stable structure of CdS/HPA-2/CN after four cycles. Meanwhile, the detailed degradation process of RhB involving de-ethylation, hydroxylation, substitution and decarboxylation was determined according to LC-MS and evaluated by Fukui function calculation. Furthermore, total organic carbon content decreased to 6.2% of the initial value. In this work, as an electron mediator, HPA-2 provides the inspiration for construction of Z-scheme heterojunction, and CdS/HPA-2/CN exhibits enormous potential in the environmental remediation by photocatalysis.

Two-dimensional MXenes: recent emerging applications

MXenes, are a rapidly growing family of two-dimensional materials exhibiting outstanding electronic, optical, mechanical, and thermal properties with versatile transition metal and surface chemistries. A wide range of transition metals and surface termination groups facilitate the properties of MXenes to be easily tuneable. Due to the physically strong and environmentally stable nature of MXenes, they have already had a strong presence in different fields, for instance energy storage, electrocatalysis, water purification, and chemical sensing. Some of the newly discovered applications of MXenes showed very promising results, however, they have not been covered in any review article. Therefore, in this review we comprehensively review the recent advancements of MXenes in various potential fields including energy conversion and storage, wearable flexible electronic devices, chemical detection, and biomedical engineering. We have also presented some of the most exciting prospects by combining MXenes with other materials and forming mixed dimensional high performance heterostructures based novel electronic devices.

Amino-functionalized NH2-MIL-125(Ti)-decorated hierarchical flowerlike Znln2S4 for boosted visible-light photocatalytic degradation

Developing novel heterojunction photocatalysts with visible-light response and remarkable photocatalytic activity have been verified to applying for the photodegradation of antibiotics in water environment. Herein, NH₂-MIL-125(Ti) was integrated with flowerlike ZnIn₂S₄ to construct NH₂-MIL-125(Ti)@ZnIn₂S₄ heterostructure using a one-pot solvothermal method. The photocatalytic performance was evaluated by the degradation of tetracycline (TC) under visible light illumination. The optimized NM(2%)@ZIS possesses a photodegradation rate (92.8%) and TOC removal efficiency (58.5%) superior to pristine components, which can be principally attributed to the positive cooperative effects of well-matched energy level positions, strong visible-light-harvesting capacity, and abundant coupling interfaces between the two. Moreover, the probable TC degradation mechanism was also clarified using the active species trapping experiments. This study inspires further design and construction of NH₂-MIL-125(Ti) and ZnIn₂S₄ based photocatalysts for effective removal of antibiotics in water environment.

Sulfur/phosphorus doping-mediated morphology transformation of carbon nitride from rods to porous microtubes with superior photocatalytic activity

Hetero-atoms doping or morphology controlling of carbon nitride (g-C₃N₄) can availably regulate its electronic band structure and optimize photocatalytic performance under visible light. Herein, sulful (S), phosphorus (P) co-doped porous carbon nitride microtubes (SPCN) was synthesized by using ammonium dihydrogen phosphate and melamine as precursors, in which ammonium dihydrogen phosphate can not only control the morphology of carbon nitride from nanorods to porous microtubes, but also provide a potential P source for P-doped CN. The prepared SPCN0.1 with the content of 0.1 g ammonium dihydrogen phosphate displayed the highest photocatalytic hydrogen generation rate of 4200.3 µmol g^-1h^-1, which was approximately 25 and 1.6 folds by bulk g-C₃N₄ (CN) and sulphur doped g-C₃N₄ microrods (SCN), respectively. Moreover, the apparent quantum efficiency of HER reached up to 10.3 % at 420 nm. The enhanced photocatalytic performance may be attributed to the synergistic effect of S, P doping and morphology structure of carbon nitride, which effectively accelerated the separation and transfer of photogenerated electron-hole pairs, proved by photoluminescence spectra, time-resolved PL spectra, electrochemical impedance spectrum and transient photocurrent responses. The novel synthetic method described in this paper is an effective approach to regulate the morphology of g-C₃N₄via non-metal doping with superior photocatalytic performance.

Iron/titanium oxide-biochar (Fe2TiO5/BC): A versatile adsorbent/photocatalyst for aqueous Cr(VI), Pb2+, F- and methylene blue

This is the first report of the metal Fe-Ti oxide/biochar (Fe₂TiO₅/BC) composite for simultaneous removal of aqueous Pb²⁺, Cr⁶⁺, F^- and methylene blue (MB). Primary Fe₂TiO₅ nano particles and aggregates were dispersed on a high surface area Douglas fir BC (∼700 m²/g) by a simple chemical co-precipitation method using FeCl₃ and TiO(acac)₂ salts treated by base and heated to 80 °C. This was followed by calcination at 500 °C. This method previously was used without BC to make the neat mixed oxide Fe₂TiO₅, exhibiting a lower energy band gap than TiO₂. Adsorption of Cr(VI), Pb(II), fluoride, and MB on Fe₂TiO₅/BC was studied as a function of pH, equilibrium time, initial adsorbate concentration, and temperature. Adsorption isotherm studies were conducted at 5, 25, and 45 ℃ and kinetics for all four adsorbates followed the pseudo second order model. Maximum Langmuir adsorption capacities for Pb²⁺, Cr⁶⁺, F^- and MB at their initial pH values were 141 (pH 2), 200 (pH 5), 36 (pH 6) and 229 (pH 6) mg/g at 45 ℃ and 114, 180, 26 and 210 mg/g at 25 ℃, respectively. MB was removed from the water on Fe₂TiO₅/BC by synergistic adsorption and photocatalytic degradation at pH 3 and 6 under UV (365 nm) light irradiation. Cr⁶⁺, Pb²⁺, F^-, and MB each exhibited excellent removal capacities in the presence of eight different competitive ions in simulated water samples. The removal mechanisms on Fe₂TiO₅/BC and various competitive ion interactions were proposed. Some iron ion leaching at pH 3 catalyzed Photo-Fenton destruction of MB. Fe₂TiO₅, BC, and Fe₂TiO₅/BC bandgaps were studied to help understand photocatalysis of MB and to advance supported metal oxide photodegradation using smaller energy band gaps than the larger bandgap of TiO₂ for water treatment. A long range goal is to photocatalytically destroy some sorbates with adsorbents to avoid the need for regeneration steps.

Review elucidating graphene derivatives (GO/rGO) supported metal sulfides based hybrid nanocomposites for efficient photocatalytic dye degradation

Photocatalysis by utilizing semiconductors for the removal of toxic pollutants has gained tremendous interest for remediation purposes. The organic pollutants usually include; pesticides, dyes and other phenolic compounds. An imperative restraint associated with the photocatalytic effectiveness of the catalyst is the rapid recombination of the light generated electrons and holes. The particle agglomeration and electron-hole recombination hinders the rate of pollutant removal. For decades, researchers have used metal-sulfides efficiently for photocatalytic dye degradation. The recent use of hybrid nanomaterials with the combination of graphene derivatives such as graphene oxide and reduced graphene oxide (GO/rGO)-metal sulfide has gained interest. These composites have displayed an impressive upsurge in the photocatalytic activity of materials. The current review describes the various researches on dye photodegradation by employing (GO/rGO)-metal sulfide, exhibiting a boosted potential for photocatalytic dye degradation. A comprehensive study on (CuS, ZnS and CdS)–GO/rGO hybrid composites have been discussed in detail for effective photocatalytic dye degradation in this review. Astonishingly improved dye degradation rates were observed in all these studies employing such hybrid composites. The several studies described in the review highlighted the varying degradation rates based on diverse research parameters and efficacy of graphene derivatives for enhancement of photocatalytic activity.

Semiconducting graphitic carbon nitride integrated membranes for sustainable production of clean water: A review

Semiconducting membranes integrated with nanomaterials have placed themselves in new emerging researches tremendously for seawater desalination, oil-water separation, disinfection, removal of inorganic as well as organic pollutants. Howbeit, only nanoparticles unified membranes show quite a lot lags in their performance, although some of these particles associated with the demerits of high cost. In contrast, graphitic carbon nitride incorporated membranes offered improved aforementioned properties corresponding to absolute essential qualities such as cost-effective, environmentally friendly, easy-to-operate, green manufacturing, anti-fouling, and low energy consumption. Moreover, their high mechanical strength, high stability against harsh environment and long-term utilization without flux reduction are strong plus. Even though there are some undeniable downsides of these membranes in real world applications as bulk synthesis, consistent dispersion of graphitic carbon nitride, low photocatalytic efficiency etc. Accordingly, in the present article, these frailties of the membranes having graphitic carbon nitride as a filler and their respective synthesis procedures and properties are discussed. A comprehensive analysis over the application of semiconducting graphitic carbon nitride incorporated membranes with and without special surface modification; and exploration of the future challenges and difficulties associated to these membranes are also reviewed. Consequently, the current article provides brief overview about graphitic carbon nitride integrated composite membranes as well as their applications, and it finished up with new thoughts of further improvements/modifications to overcome their shortcomings in actual environmental conditions.

Application of polyoxometalates in photocatalytic degradation of organic pollutants

Organic pollutants are highly toxic, accumulative, and difficult to degrade or eliminate. As a low-cost, high-efficiency and energy-saving environmental purification technology, photocatalytic technology has shown great advantages in solving increasingly serious environmental pollution problems. The development of efficient and durable photocatalysts for the degradation of organic pollutants is the key to the extensive application of photocatalysis technology. Polyoxometalates (POMs) are a kind of discrete metal-oxide clusters with unique photo/electric properties which have shown promising applications in photocatalytic degradation. This review summarizes the recent advances in the design and synthesis of POM-based photocatalysts, as well as their application in the degradation of organic dyes, pesticides and other pollutants. In-depth perspective views are also proposed in this review.

Graphitic Carbon Nitride Causes Widespread Global Molecular Changes in Epithelial and Fibroblast Cells

For scaffold and imaging applications, nanomaterials such as graphene and its derivatives have been widely used. Graphitic carbon nitride (g-C₃N₄) is among one such derivative of graphenes, which draws strong consideration due to its physicochemical properties and photocatalytic activity. To use g-C₃N₄ for biological applications, such as molecular imaging or drug delivery, it must interact with the epithelium, cross the epithelial barrier, and then come in contact with the extracellular matrix of the fibroblast cells. Thus, it becomes essential to understand its molecular mechanism of action. Hence, in this study, to understand the molecular reprogramming associated with g-C₃N₄, global gene expression using DNA microarrays and proteomics using tandem mass tag (TMT) labeling and mass spectrometry were performed in epithelial and fibroblast cells, respectively. Our results showed that g-C₃N₄ can cross the epithelial barrier by regulating the adherens junction proteins. Further, using g-C₃N₄-PDMS scaffolds as a mimic of the extracellular matrix for fibroblast cells, the common signaling pathways were identified between the epithelium and fibroblast cells. These pathways include Wnt signaling, integrin signaling, TGF-β signaling, cadherin signaling, oxidative stress response, ubiquitin proteasome pathway, and EGF receptor signaling pathways. These altered signature pathways identified could play a prominent role in g-C₃N₄-mediated cellular interactions in both epithelial and fibroblast cells. Additionally, β catenin, EGFR, and MAP2K2 protein-protein interaction networks could play a prominent role in fibroblast cell proliferation. The findings could further our knowledge on g-C₃N₄-mediated alterations in cellular molecular signatures, enabling the potential use of these materials for biological applications such as molecular imaging and drug delivery.

Polarization-enhanced photoelectrochemical properties of BaTiO3/BaTiO3-x/CdS heterostructure nanocubes

With the aim of improving the photocatalytic activity for water splitting, novel core-shell-structured crystalline-BaTiO₃/amorphous-BaTiO_3-x/crystalline-CdS composite nanocubes are prepared by a facile two-step synthesis approach. Basic characterization techniques such as X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy and transmission electron microscopy are carried out on the as-prepared composite nanocubes in order to confirm the quality of their crystal structure, morphology and chemical components correspondingly. UV-Vis-NIR measurements of the as-prepared composite nanocubes validate the presence of extended visible-light absorbance due to oxygen-deficient BaTiO_3-x. Photoelectrochemical tests are carried out on the as-prepared nanocomposite films that are coated directly on indium tin oxide (ITO) glass substrates. The as-prepared composite nanocubes show a photocurrent density of 100 μA cm^-2 without electric field poling, whereas they show about 200 μA cm^-2 with an electric field poling of 18.8 kV cm^-1. This study suggests that the photoelectrochemical performance is highest in our prepared BaTiO₃/BaTiO_3-x/CdS composite film compared to the pure BaTiO₃, CdS and BaTiO₃/BaTiO_3-x films, and it may offer a new potential route for designing cost-effective, highly stable and efficient photocatalysts.

Harnessing photo/electro-catalytic activity via nano-junctions in ternary nanocomposites for clean energy

Though solar energy availability is predicted for centuries, the diurnal and asymmetrical nature of the sun across the globe presents significant challenges in terms of harvesting sunlight. Photo/electro-catalysis, currently believed to be the bottleneck, promises a potential solution to these challenges along with a green and sustainable environment. This review aims to provide the current highlights on the application of inorganic-semiconductor-based ternary nanocomposites for H2 production and pollutant removal. Various engineering strategies employing integration of 2D materials, 1D nanorods, and/or 0D nanoparticles with inorganic semiconductors to create multiple nano-junctions have been developed for the excellent photocatalytic activity. Following a succinct description of the latest progress in photocatalysts, a discussion on the importance of ternary electrocatalysts in the field of next-generation supercapacitors has been included. Finally, the authors' perspectives are considered briefly, including future developments and critical technical challenges in the ever-growing field of photo/electro-catalysis.

Recent Strategies for Environmental Remediation of Organochlorine Pesticides

The amount of organochlorine pesticides in soil and water continues to increase; their presence has surpassed maximum acceptable concentrations. Thus, the development of different removal strategies has stimulated a new research drive in environmental remediation. Different techniques such as adsorption, bioremediation, phytoremediation and ozonation have been explored. These techniques aim at either degrading or removal of the organochlorine pesticides from the environment but have different drawbacks. Heterogeneous photocatalysis is a relatively new technique that has become popular due to its ability to completely degrade different toxic pollutants—instead of transferring them from one medium to another. The process is driven by a renewable energy source, and semiconductor nanomaterials are used to construct the light energy harvesting assemblies due to their rich surface states, large surface areas and different morphologies compared to their corresponding bulk materials. These make it a green alternative that is cost-effective for organochlorine pesticides degradation. This has also opened up new ways to utilize semiconductors and solar energy for environmental remediation. Herein, the focus of this review is on environmental remediation of organochlorine pesticides, the different techniques of their removal from the environment, the advantages and disadvantages of the different techniques and the use of specific semiconductors as photocatalysts.

Simultaneous oxidation and adsorption of arsenic by one-step fabrication of alum sludge and graphitic carbon nitride (g-C3N4)

The oxidation of trivalent arsenic (As(III)) to pentavalent arsenic (As(V)) is a common pretreatment to remove As(III) from the aqueous phase. The graphitic carbon nitride as a photocatalyst can transform As(III) to As(V), but the photocatalyst does not adsorb any species of arsenic. In this study, a new composite material to achieve the simultaneous oxidation and adsorption of arsenic was synthesized by co-pyrolyzing alum sludge and melamine. It was hypothesized that graphitic carbon nitride derived from melamine oxidizes As(III) to As(V) and pyrolyzed alum sludge provides strong adsorption sites for the oxidized As(V). The composites were characterized by X-ray diffraction, Brunauer-Emmett-Teller(BET) surface, scanning electron microscope, and X-ray photoelectron spectrometer. The composite material effectively converted As(III) to As(V) under the light, and the total arsenic concentration decreased in the aqueous phase via the adsorption of As(V). Speciation analysis of arsenic on the composite showed that both As(III) and As(V) species were present on the surface of adsorbent, from which desorption by mixing with deionized water was difficult. This new and green composite material can oxidize As(III) and adsorb arsenic simultaneously under the light, which can be used to treat arsenic-containing water.

Applications of 2D MXenes in energy conversion and storage systems

This article provides a comprehensive review of MXene materials and their energy-related applications.

One-Pot Synthesis of Pd-Based Ternary Pd@CdS@TiO2 Nanoclusters via a Solvothermal Route and Their Catalytic Reduction Efficiency toward Toxic Hexavalent Chromium

In this work, we report the synthesis of Pd-based ternary Pd@CdS@TiO₂ nanocomposites using molecular precursors. This method is facile, less time-consuming, and cost-effective. This catalyst is prepared within 2 h by a solvothermal route using molecular precursors. Information about the phase, morphologies, elemental mapping, and composition of the nanocomposites was obtained using various characterization techniques. The catalytic activity of the as-prepared Pd-based ternary Pd@CdS@TiO₂ nanocomposites exhibits effective reduction efficiency for the conversion of toxic Cr(VI) to Cr(III) using formic acid as a reducing agent within 5-7 min. To the best of our knowledge, this is the first report on Pd-based ternary Pd@CdS@TiO₂ nanocomposites prepared by a solvothermal route and used as catalysts toward the reduction of hexavalent chromium at room temperature.