New horizons in developing cell lysis methods: A Review

Cell lysis is an essential step in many studies related to biology and medicine. Based on the scale and medium that cell lysis is carried out, there are three main types of the cell lysis: 1) lysis of the cells in the surrounding environment, 2) lysis of the isolated or cultured cells and 3) Single cell lysis. Conventionally, several cell lysis methods have been developed, such as freeze-thawing, bead beating, incursion in liquid nitrogen, sonication and enzymatic and chemical based approaches. In recent years, various novel technologies have been employed to develop new methods of cell lysis. The aim of studies in this field is to introduce more precise and efficient tools or to reduce the costs of cell lysis procedures. Nanostructure based lysis methods, acoustic oscillation, electrical current, irradiation, bacteria-mediated cell lysis, magnetic ionic liquids, bacteriophage genes, monolith columns, hydraulic forces and steam explosion are some examples of new developed cell lysis methods. Beside the significant advances in this field, there are still many challenges and the tools must be further improved. This article is protected by copyright. All rights reserved.

Switchable inhibitory behavior of divalent magnesium ion in DNA hybridization-based gene quantification

Mg2+ ion is a switchable inhibitor that can cause either under or over-estimation at different concentrations in DNA hybridization based gene quantification.

Sample Preparation and Diagnostic Methods for a Variety of Settings: A Comprehensive Review

Sample preparation is an essential step for nearly every type of biochemical analysis in use today. Among the most important of these analyses is the diagnosis of diseases, since their treatment may rely greatly on time and, in the case of infectious diseases, containing their spread within a population to prevent outbreaks. To address this, many different methods have been developed for use in the wide variety of settings for which they are needed. In this work, we have reviewed the literature and report on a broad range of methods that have been developed in recent years and their applications to point-of-care (POC), high-throughput screening, and low-resource and traditional clinical settings for diagnosis, including some of those that were developed in response to the coronavirus disease 2019 (COVID-19) pandemic. In addition to covering alternative approaches and improvements to traditional sample preparation techniques such as extractions and separations, techniques that have been developed with focuses on integration with smart devices, laboratory automation, and biosensors are also discussed.

Ozonation enhancement of low cost double-stranded DNA binding dye based fluorescence measurement of total bacterial load in water

We demonstrated the feasibility of using ozonation to enhance the performance of dsDNA binding dye SYBR Green I in the fluorescence measurement of total bacterial load in water. Unlike its membrane permeable but expensive equivalent such as SYTO82 dye, SYBR Green I is many times cheaper but membrane impermeable. Ozonation allowed SYBR Green I dye to permeate the membrane and bind with the dsDNA within by first breaching it. Using E. coli K12 bacteria at serial dilution ratios from 1/1 (980 CFU mL⁻¹) to 1/200, we achieved corresponding quantification from 618.7 ± 9.4 to 68.0 ± 1.9 RFU (100 to 11.00% normalized RFU). In comparison, plate counting and optical density measurement were only able to quantify up till a serial dilution ratio of 1/50 (40 CFU mL⁻¹ and 0.0421, respectively). Most importantly with ozonation, the sensitivity of SYBR Green I dye based fluorescence measurement was improved by ∼140 to 210% as compared to that without ozonation. Given its low electrical power consumption, lab-on-chip compatibility and reagent-less nature, ozonation is highly compatible with portable fluorimeters to realize low-cost monitoring of total bacterial load in water.

Principle of ozonation enhanced dsDNA binding dye based fluorescence measurement of total bacterial load in water.

Optimum Operating Frequency for Electrocoalescence Induced by Pulsed Corona Discharge

Current oil-water separation methods require a significant power, a high processing time, and costly equipment, which typically yield low treatment efficiency. Pulsed direct current (dc) electric fields and recently nonuniform electric fields caught considerable attention in the petroleum industry research in order to address the most common oil-water separation issues such as chain formation, partial coalescence, and low efficiency in either the energy consumption or coalescence rate. Here, a contact-less charge injection method induced by corona discharge is utilized to investigate the impacts of nonuniform and pulsed dc electric fields on the coalescence of water droplets inside an oil medium. The operating process parameters were experimentally calibrated and optimized with the goal of increasing the effectiveness and energy consumption efficiency of the coalescence process. High-speed imaging and image processing techniques were used in order to investigate the effect of different active forces (i.e., dipole-dipole interaction, migratory coalescence, or electrophoresis, and dielectrophoresis) during the coalescence process. Different pulsed dc frequencies and pure dc waveforms were utilized and their impact on the coalescence of water droplets was investigated. An optimal coalescence recipe was proposed by continuous measurement of the distance, velocity, and acceleration of the coalescing water droplets. The results of this study suggest use of pulsed dc and pure dc electric fields for coalescence of water droplets in concentrated and dispersed emulsions, respectively.

A simple reagent-less approach using electrical discharge as a substitution for chelating agent in addressing genomic assay inhibition by divalent cations

Electrical discharge treatment was shown to be a viable substitution for chelating agent in genomic assays. Divalent cation Mg2+ inhibits the performance of DNA hybridization based genomic assays by binding to the DNA and disrupting DNA hybridization. Until now, chelating agents such as ethylenediaminetetraacetic acid (EDTA) was the only option to address the presence of Mg2+ in samples. However, EDTA is a well-known environmental contaminant. In this work, we successfully employed electrical discharge instead of EDTA to render Mg2+ insipid. Its preliminary efficacy was first observed via circular dichroism (CD) and zeta potential analyses. After electrical discharge treatment, the reduction in CD shift at 280 nm was significant for samples with 10-3 and 10-8 M Mg2+. The zeta potential of Mg2+ laden samples were also restored from -4.71 ± 1.38 to -20.59 ± 6.37 mV after electrical discharge treatment. Both CD shift and change in zeta potential suggested that 2 min of electrical discharge treatment could prevent Mg2+ from binding to DNA. The complete efficacy of electrical discharge treatment was demonstrated with the performance recovery (within ∼15% of the control) of a genomic assay variant (NanoGene assay) while analyzing Mg2+ laden samples (10-5-10-3 M). Assuming 10 million samples are analyzed annually, the proposed electrical discharge treatment (∼50 mW per sample) would allow us to trade environmental contamination by ∼50 kg of hazardous EDTA with a single 250 W STC (standard test conditions) solar panel.

Detection of Cyanobacteria in Eutrophic Water Using a Portable Electrocoagulator and NanoGene Assay

We have demonstrated the detection of cyanobacteria in eutrophic water samples using a portable electrocoagulator and NanoGene assay. The electrocoagulator is designed to preconcentrate cyanobacteria from water samples prior to analysis via NanoGene assay. Using Microcystis aeruginosa laboratory culture and environmental samples (cell densities ranging from 1.7 × 10⁵ to 4.1 × 10⁶ and 6.5 × 10³ to 6.6 × 10⁷ cells·mL^-1, respectively), the electrocoagulator was evaluated and compared with a conventional centrifuge. Varying the operation duration from 0 to 300 s with different cell densities was first investigated. Preconcentration efficiencies (obtained via absorbance measurement) and dry cell weight of preconcentrated cyanobacteria were then obtained and compared. For laboratory samples at cell densities from 3.2 × 10⁵ to 4.1 × 10⁶ cells·mL^-1, the preconcentration efficiencies of electrocoagulator appeared to be stable at ∼60%. At lower cell densities (1.7 and 2.2 × 10⁵ cells·mL^-1), the preconcentration efficiencies decreased to 33.9 ± 0.2 and 40.4 ± 5.4%, respectively. For environmental samples at cell densities of 2.7 × 10⁵ and 6.6 × 10⁷ cells·mL^-1, the electrocoagulator maintained its preconcentration efficiency at ∼60%. On the other hand, the centrifuge's preconcentration efficiencies decreased to nondetectable and below 40%, respectively. This shows that the electrocoagulator outperformed the centrifuge when using eutrophic water samples. Finally, the compatibility of the electrocoagulator with the NanoGene assay was verified via the successful detection of the microcystin synthetase D (mcyD) gene in environmental samples. The viability of the electrocoagulator as an in situ compatible alternative to the centrifuge is also discussed.