Electrochemical Sensors for Heavy Metal Ion Detection in Aqueous Medium: A Systematic Review

Heavy metal ions (HMIs) are very harmful to the ecosystem when they are present in excess of the recommended limits. They are carcinogenic in nature and can cause serious health issues. So, it is important to detect the metal ions quickly and accurately. The metal ions arsenic (As3+), cadmium (Cd2+), chromium (Cr3+), lead (Pb2+), and mercury (Hg2+) are considered to be very toxic among other metal ions. Standard analytical methods like atomic absorption spectroscopy, atomic fluorescence spectroscopy, and X-ray fluorescence spectroscopy are used to detect HMIs. But these methods necessitate highly technical equipment and lengthy procedures with skilled personnel. So, electrochemical sensing methods are considered to be more advantageous because of their quick analysis with precision and simplicity to operate. They can detect a wide range of heavy metals providing real-time monitoring and are cost-effective and enable multiparametric detection. Various sensing applications necessitate severe regulation regarding the modification of electrode surfaces. Numerous nanomaterials such as graphene, carbon nanotubes, and metal nanoparticles have been extensively explored as interface materials in electrode modifiers. These nanoparticles offer excellent electrical conductivity, distinctive catalytic properties, and high surface area resulting in enhanced electrochemical performance. This review examines different HMI detection methods in an aqueous medium by an electrochemical sensing approach and studies the recent developments in interface materials for altering the electrodes.

Iron oxide-supported gold nanoparticle electrode for simultaneous detection of arsenic and sulfide on-site

The environmental behavior of arsenic (As) has garnered significant attention due to its hazardous nature. The fate of As often couples with sulfide, thus co-detecting arsenic and sulfide on-site is crucial for comprehending their geochemical interactions. While electrochemical methods are suitable for on-site chemical analysis, there currently exists no electrode capable of simultaneously detecting both arsenic and sulfide. To address this, we developed a dual-metal electrode consisting of iron oxide-encased carbon cloth loaded with gold nanoparticles (Au/FeOx/CC) using the electrochemical deposition method. This electrode enables square wave stripping voltammetry (SWASV) binary detection of As and sulfide. Comparison experiments reveal that the reaction sites for sulfide primarily reside on FeOx, while the interface synergy of iron oxide and gold nanoparticles enhances the response to arsenite (AsIII). Arsenate (AsV) is directly reduced to As0 on Fe0, obviating the need for an external reducing agent. The electrode achieves detection limits of 1.5 μg/L for AsV, 0.25 μg/L for AsIII, and 11.6 μg/L for sulfide at mild conditions (pH 7.8). Field validation was conducted in the Tengchong geothermal hot spring region, where the electrochemical method exhibited good correlation with the standard methods: Total As (r = 0.978 vs. ICP-MS), AsIII (r = 0.895 vs. HPLC-ICP-MS), and sulfide (r = 0.983 vs. colorimetric method). Principal component analysis and correlation analysis suggest that thioarsenic, could potentially be positive interferents for AsIII. However, this interference can be anticipated and mitigated by monitoring the abundance of sulfide. The study provides new insights and problems for the electrochemical detection of coexisted As and sulfide.

Zirconia-based nanomaterials: recent developments in synthesis and applications

In the last decade, the whole scientific community has witnessed great advances and progress in the various fields of nanoscience. Among the different nanomaterials, zirconia nanomaterials have found numerous applications as nanocatalysts, nanosensors, adsorbents, etc. Additionally, their exceptional biomedical applications in dentistry and drug delivery, and interesting biological properties, viz. anti-microbial, antioxidant, and anti-cancer activity, have further motivated the researchers to explore their physico-chemical properties using different synthetic pathways. With such an interest in zirconia-based nanomaterials, the present review focuses systematically on different synthesis approaches and their impact on the structure, size, shape, and morphology of these nanomaterials. Broadly, there are two approaches, viz., chemical synthesis which includes hydrothermal, solvothermal, sol-gel, microwave, solution combustion, and co-precipitation methods, and a greener approach which employs bacteria, fungus, and plant parts for the preparation of zirconia nanoparticles. In this review article, the aforementioned methods have been critically analyzed for obtaining specific phases and shapes. The review also incorporates a detailed survey of the applications of zirconia-based nanomaterials. Furthermore, the influence of specific phases, morphology, and the comparison with their counterpart composites for different applications have also been included. Finally, the concluding remarks, prospects and possible scope are given in the last section.

Recent Advances and Perspective of Nanotechnology-Based Implants for Orthopedic Applications

Bioimplant engineering strives to provide biological replacements for regenerating, retaining, or modifying injured tissues and/or organ function. Modern advanced material technology breakthroughs have aided in diversifying ingredients used in orthopaedic implant applications. As such, nanoparticles may mimic the surface features of real tissues, particularly in terms of wettability, topography, chemistry, and energy. Additionally, the new features of nanoparticles support their usage in enhancing the development of various tissues. The current study establishes the groundwork for nanotechnology-driven biomaterials by elucidating key design issues that affect the success or failure of an orthopaedic implant, its antibacterial/antimicrobial activity, response to cell attachment propagation, and differentiation. The possible use of nanoparticles (in the form of nanosized surface or a usable nanocoating applied to the implant’s surface) can solve a number of problems (i.e., bacterial adhesion and corrosion resilience) associated with conventional metallic or non-metallic implants, particularly when implant techniques are optimised. Orthopaedic biomaterials’ prospects (i.e., pores architectures, 3D implants, and smart biomaterials) are intriguing in achieving desired implant characteristics and structure exhibiting stimuli-responsive attitude. The primary barriers to commercialization of nanotechnology-based composites are ultimately discussed, therefore assisting in overcoming the constraints in relation to certain pre-existing orthopaedic biomaterials, critical factors such as quality, implant life, treatment cost, and pain alleviation.

Smartphone-based electrochemical analysis integrated with NFC system for the voltammetric detection of heavy metals using a screen-printed graphene electrode

The electrochemical determination of five heavy metals is demonstrated using a wireless and card-sized potentiostat coupled with a smartphone through near-field communication (NFC) technology. A smartphone application was customized to command the NFC potentiostat, collect real-time signals, process the data, and ultimately display the quantities of the selected elements. The screen-printed graphene electrode (SPGE) was simply fabricated and modified using different nanomaterials for each heavy metal. Using differential pulse voltammetry (DPV) mode on the smartphone, the signal peaks were presented at + 10 mV for As(III), + 350 mV for Cr(VI), 0 mV for Hg(II), - 900 mV for Cd(II), and - 680 mV vs. Ag/AgCl for Pb(II). The linear ranges were 25-500, 250-25,000, 100-1,500, 25-750, 25-750 ng mL^-1 with detection limits of 3.0, 40, 16, 2.0, and 0.95 ng mL^-1 for As(III), Cr(VI), Hg(II), Cd(II), and Pb(II), respectively. The reproducibility in terms of relative standard deviation was less than 8.8% (n = 5 devices) of the developed SPGE coupled with the NFC potentiostat. Various samples for different applications (e.g., food safety and environmental monitoring) were analyzed and quantified using the proposed sensors. The results from this sensor indicate that there is no significant difference (95% confidence level) compared with those obtained from the traditional ICP-OES method, while the recoveries were found in the acceptable range of 80-111%. Hence, it can be deduced that this recent advanced technology of the NFC potentiostat developed for heavy metal analysis offers a highly sensitive and selective detection, yet the sensor remains compact, low-cost, and readily accessible to end-users.

Advances in Electrochemical Detection Electrodes for As(III)

Arsenic is extremely abundant in the Earth's crust and is one of the most common environmental pollutants in nature. In the natural water environment and surface soil, arsenic exists mainly in the form of trivalent arsenite (As(III)) and pentavalent arsenate (As(V)) ions, and its toxicity can be a serious threat to human health. In order to manage the increasingly serious arsenic pollution in the living environment and maintain a healthy and beautiful ecosystem for human beings, it is urgent to conduct research on an efficient sensing method suitable for the detection of As(III) ions. Electrochemical sensing has the advantages of simple instrumentation, high sensitivity, good selectivity, portability, and the ability to be analyzed on site. This paper reviews various electrode systems developed in recent years based on nanomaterials such as noble metals, bimetals, other metals and their compounds, carbon nano, and biomolecules, with a focus on electrodes modified with noble metal and metal compound nanomaterials, and evaluates their performance for the detection of arsenic. They have great potential for achieving the rapid detection of arsenic due to their excellent sensitivity and strong interference immunity. In addition, this paper discusses the relatively rare application of silicon and its compounds as well as novel polymers in achieving arsenic detection, which provides new ideas for investigating novel nanomaterial sensing. We hope that this review will further advance the research progress of high-performance arsenic sensors based on novel nanomaterials.

Noble-metal-free Fe3O4/Co3S4 nanosheets with oxygen vacancies as an efficient electrocatalyst for highly sensitive electrochemical detection of As(III)

The electrochemical method for highly sensitive determination of arsenic(III) in real water samples with noble-metal-free nanomaterials is still a difficult but significant task. Here, an electrochemical sensor driven by noble-metal-free layered porous Fe₃O₄/Co₃S₄ nanosheets was successfully employed for As(III) analysis, which was prepared via a facile two-step method involves a hydrothermal treatment and a subsequent sulfurization process. As expected, the electrochemical detection of As(III) in 0.1 M HAc-NaAc (pH 6.0) by square wave anodic stripping voltammetry (SWASV) with a considerable sensitivity of 4.359 μA/μg·L^-1 was obtained, which is better than the commonly used noble metals modified electrodes. Experimental and characterization results elucidate the enhancement of As(III) electrochemical performance could be attributed to its nano-porous structure, the presence of oxygen vacancies and strong synergetic coupling effects between Fe₃O₄ and Co₃S₄ species. Besides, the Fe₃O₄/Co₃S₄ modified screen printed carbon electrode (Fe₃O₄/Co₃S₄-SPCE) shows remarkable stability and repeatability, valuable anti-interference ability and could be used for detection in real water samples. Consequently, the results confirm that as-prepared porous Fe₃O₄/Co₃S₄ nanosheets is identified as a promising modifier to detect As(III) in real sample analysis.

A competitive coordination-based immobilization-free electrochemical biosensor for highly sensitive detection of arsenic(v) using a CeO2-DNA nanoprobe

We developed a competitive coordination-based immobilization-free electrochemical biosensor for highly sensitive and selective detection of arsenic(v) using a CeO₂-DNA nanoprobe, which effectively circumvented complicated modification procedures and successfully achieved arsenic(v) determination in natural water samples.

A new CQDs/f-MWCNTs/GO nanocomposite electrode for arsenic (10−12M) quantification in bore-well water and industrial effluents

Strategic combination ofCQDs/f-MWCNTs/GO/GCE for pico-molar arsenic sensing.

Highly Sensitive As3+ Detection Using Electrodeposited Nanostructured MnOx and Phase Evolution of the Active Material during Sensing

A simple, one-step electrodeposition approach has been used to fabricate MnO_x on an indium-doped tin oxide substrate for highly sensitive As³⁺ detection. We report an experimental limit of detection of 1 ppb through anodic stripping voltammetry with selectivity to As³⁺ in the presence of 10 times higher concentrations of several metal ions. Additionally, we report the simultaneous phase evolution of active material occurring through multiple stripping cycles, wherein MnO/Mn₂O₃ eventually converts to Mn₃O₄ as a result of change in the oxidation states of manganese. This occurs with concomitant changes in morphology. Change in the electronic property (increased charge transfer resistance) of the material due to sensing results in an eventual decrease in sensitivity after multiple stripping cycles. In a nutshell, this paper reports stripping-voltammetry-induced change in morphology and phase of as-prepared Mn-based electrodes during As sensing.

Manganese Oxide Nanochips as a Novel Electrocatalyst for Direct Redox Sensing of Hexavalent Chromium

In order to maintain a healthy organisation of bionetworks, both qualitative and quantitative estimation of hexavalent chromium in food and beverage samples is required based on proper quality control and assurance. Nonetheless, conventional quantitation techniques for hexavalent chromium generally suffer from certain limitations (e.g., the need for expertise, costly equipment, and a complicated procedure). This research was performed to elaborate a novel method to quantify hexavalent chromium based on an electrochemical cyclic voltammetry technique. To this end, nanochips of manganese oxide (Mn₃O₄: approximately 80–90 nm diameter and 10 nm thickness) were synthesized using a chemical method and characterized with spectroscopic and microscopic approaches. These nanochips were employed as proficient electrocatalytic materials in direct redox sensing of hexavalent chromium in both real samples and laboratory samples. Manganese oxide nanochips felicitated large surface area and catalytic action for direct electrochemical reduction of hexavalent chromium at electrode surface. This fabricated nanochip sensor presented a detection limit of 9.5 ppb with a linear range of 50–400 ppb (sensitivity of 25.88 µA cm⁻² ppb⁻¹).

Arsenic sensor development based on modification with (E)-N′-(2-nitrobenzylidine)-benzenesulfonohydrazide: a real sample analysis

(E)-N′-(2-Nitrobenzylidene)-benzenesulfonohydrazide was prepared from 2-nitrobenzaldehyde and benzenesulfonylhydrazine by using a condensation method and applied as a selective As³⁺ sensor.

Enhanced antibacterial profile of nanoparticle impregnated cellulose foam filter paper for drinking water filtration

Filtration is a promising water treatment method to purify drinking water. To develop highly efficient drinking water filter paper, water-resistant cellulose foam paper with a high wet strength property was fabricated using diverse metal oxide (e.g., copper oxide (CuO), zinc oxide (ZnO), and silver oxide (Ag₂O)) nanoparticles. These nanoparticles were synthesized using the hydrothermal reaction method. Their morphological structures were studied using a field emission scanning electron microscope (FESEM). The presence of coated nanoparticles on the cellulose foam filter was verified by energy dispersive X-ray spectroscopy (EDX) methods. The antibacterial performance of different types of modified cellulose foam filters was studied against E. coli, P. aeruginosa, B. subtilis, and B. cereus strains using the zone of inhibition test. The antibacterial profile of the cellulose foam filter impregnated with Ag₂O nanoparticles, when tested against different types of bacteria, exhibited higher antibacterial activity than the cellulose foam filter impregnated with ZnO and CuO nanoparticles.

Photocatalytic activity against azo dye and cytotoxicity on MCF-7 cell lines of zirconium oxide nanoparticle mediated using leaves of Lagerstroemia speciosa

Metal oxide nanoparticles are gaining interest in recent years. The present paper explains about the green synthesis of zirconium oxide nanoparticles (ZrO NPs) mediated from the leaves of Lagerstroemia speciosa. The prepared ZrO NPs were characterized by UV-vis spectroscopy, FT-IR, X-ray diffraction analysis (XRD), Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray spectroscopy (EDX) and Thermogravimetric Analysis (TGA). The photocatalytic activity of ZrO NPs was studied for azo dye by exposing to sunlight. The azo dye was degraded up to 94.58%. Also the ZrO NPs were studied for in vitro cytotoxicity activity against breast cancer cell lines-MCF-7 and evaluated by MTT assay. The cell morphological changes were recorded by light microscope. The cells viability was seen at 500μg/mL when compared against control. Hence the research highlights, that the method was simple, eco-friendly towards environment by phytoremediation activity of the azo dye and cytotoxicity activity against MCF-7 cell lines. Hence the present paper may help to further explore the metal nanoparticle for its potential applications.

Highly sensitive amperometric detection of cardiac troponin I using sandwich aptamers and screen-printed carbon electrodes

In this study, we developed a sandwich aptamer-based screen-printed carbon electrode (SPCE) using chronoamperometry for the detection of cardiac troponin I (cTnI), one of the promising biomarkers for acute myocardial infarction (AMI). Disposable three-electrode SPCEs were manufactured using a screen printer, and various modifications such as electrodeposition of gold nanoparticles and electropolymerization of conductive polymers were performed. From the bare electrode to the aptamer-immobilized SPCE, all processes were monitored and analyzed via various techniques such as cyclic voltammetry, electrochemical impedance spectroscopy, and X-ray photoelectron spectroscopy. The quantification of cTnI was conducted based on amperometric signals from the catalytic reaction between hydrazine and H₂O₂. The fabricated aptasensor in a buffer, as well as in a serum-added solution, exhibited great analytical performance with a dynamic range of 1-100 pM (0.024-2.4ng/mL) and a detection limit of 1.0 pM (24pg/mL), which is lower than the existing cutoff values (40-700pg/mL). Furthermore, the developed sensor showed high sensitivity to cTnI over other proteins. It is anticipated that this potable SPCE aptasensor for cTnI will become an innovative diagnostic tool for AMI.