Functional, composite polythioether nanoparticles via thiol-alkyne photopolymerization in miniemulsion

Anomalously Shaped Functional Particles Prepared by Thiol-Isocyanate Off-Stoichiometric Click Dispersion Polymerization

Anomalously shaped microparticles have attractive advantages in applications. They are usually prepared by chain-growth polymerizations in heterogeneous systems. Recently, thiol-X step-growth polymerizations have been used to produce functional particles with a regular shape but rarely anomalous shapes. Herein, we report the preparation of anomalously shaped particles by thiol-isocyanate dispersion polymerization (Dis.P) in ethanol using polyvinylpyrrolidone (PVP) as a stabilizer and catalyst. Papillae-shaped, raspberry-like, and multibulged particles are prepared by tuning monomer combinations, contents, and feed ratios. Particle morphology evolutions during polymerization are observed by scanning electron microscopy (SEM). Distinct from previous works, particles with residual -SH groups are obtained even with equal moles of monomers added initially. The residue of -SH groups is revealed by Fourier transform infrared spectroscopy (FT-IR) analyses and confirmed by detection with a fluorescent probe containing disulfide linkage. Moreover, fluorescent particle probes are formed by the reaction of excess -NCO groups on particles with fluorescein isothiocyanate isomer I (FITC) and dithioacetal-functionalized perylenediimide (DTPDI). The probes are sensitive in detection of glutathione (GSH) and Hg²⁺ in water. Hg²⁺ as low as 1-0.1 ppb is detected using a raspberry-like particle probe with DTPDI.

Programmable Porous Polymers via Direct Bubble Writing with Surfactant-Free Inks

Fabrication of macroporous polymers with functionally graded architecture or chemistry bears transformative potential in acoustic damping, energy storage materials, flexible electronics, and filtration but is hardly reachable with current processes. Here, we introduce thiol-ene chemistries in direct bubble writing, a recent technique for additive manufacturing of foams with locally controlled cell size, density, and macroscopic shape. Surfactant-free and solvent-free graded three-dimensional (3D) foams without drying-induced shrinkage were fabricated by direct bubble writing at an unparalleled ink viscosity of 410 cP (40 times higher than previous formulations). Functionalities including shape memory, high glass transition temperatures (>25 °C), and chemical gradients were demonstrated. These results extend direct bubble writing from aqueous inks to nonaqueous formulations at high liquid flow rates (3 mL min-1). Altogether, direct bubble writing with thiol-ene inks promises rapid one-step fabrication of functional materials with locally controlled gradients in the chemical, mechanical, and architectural domains.

A novel polythioether-based rhodamine B fluorescent probe via successive click reaction and its application in iron ion detection and cell imaging

Polythioether has good chemical stability and biocompatibility and is a kind of promising polymers for the application of optical materials, medical materials and energy conversion materials. However, the fluorescent probe based on polythioether is still rare. Herein, a series of polythioether based polymer fluorescent probes were synthesized by successive thiol click reaction under ultraviolet light at room temperature. The poly(thioether)s have good selectivity and responsiveness to iron ions and can be applied in cell imaging, which indicate that the broad application prospects of polythioether-based fluorescent probes in ion detection and bioimaging.

TEMPO Driven Mild and Modular Route to Functionalized Microparticles

The synthesis of crosslinked polymeric microspheres (3.8-15.0 µm) via (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) initiated thiol-ene dispersion polymerization under ambient conditions is reported for the first time. The initiating ability of TEMPO for the thiol-ene reaction is validated by electron paramagnetic resonance (EPR) and ¹ H nuclear magnetic resonance (NMR) spectroscopy on model reactions between 1-octadecanethiol and two electron deficient enes, n-butylacrylate and divinyl sulfone. Critically, the TEMPO resonance observed in the EPR spectra decreases with time when TEMPO is mixed with thiol and an electron deficient ene. The ¹ H NMR spectra demonstrate formation of up to 90% of thioether under ambient conditions. Based on these model reactions, a variety of crosslinked polymeric microspheres are synthesized with excellent morphological stability using poly(vinyl pyrrolidone) as surfactant. The ability of the microspheres for a second TEMPO initiated thiol-ene reaction is demonstrated by the ligation of fluorescein-5-maleimide (an ene) to the microspheres' surface containing excess of thiol functionality and by ligation of cysteine (containing a thiol group) to the microspheres' surface containing an excess of ene functionality. The synthesized polymeric microspheres are characterized using scanning electron microscopy, differential scanning calorimetry, Fourier-transform infrared spectroscopy, zeta potential, and X-ray photoelectron spectroscopy.

Polymerizations in oil-in-oil emulsions using 2D nanoparticle surfactants

Oil-in-oil emulsions are especially attractive for compartmentalized reactions with water-sensitive monomers which cannot be used with traditional oil/water emulsions.

Combined chain- and step-growth dispersion polymerization toward PSt particles with soft, clickable patches

Particles with a hard body and soft, clickable dimple- or bulge-patches are prepared by simple combined chain- and step-growth dispersion polymerization.

Destruction of Opportunistic Pathogens via Polymer Nanoparticle-Mediated Release of Plant-Based Antimicrobial Payloads

The synthesis of antimicrobial thymol/carvacrol-loaded polythioether nanoparticles (NPs) via a one-pot, solvent-free miniemulsion thiol-ene photopolymerization process is reported. The active antimicrobial agents, thymol and carvacrol, are employed as "solvents" for the thiol-ene monomer phase in the miniemulsion to enable facile high capacity loading (≈50% w/w), excellent encapsulation efficiencies (>95%), and elimination of all postpolymerization purification processes. The NPs serve as high capacity reservoirs for slow-release and delivery of thymol/carvacrol-combination payloads that exhibit inhibitory and bactericidal activity (>99.9% kill efficiency at 24 h) against gram-positive and gram-negative bacteria, including both saprophytic (Bacillus subtilis ATCC 6633 and Escherichia coli ATCC 25922) and pathogenic species (E. coli ATCC 43895, Staphylococcus aureus RN6390, and Burkholderia cenocepacia K56-2). This report is among the first to demonstrate antimicrobial efficacy of essential oil-loaded nanoparticles against B. cenocepacia - an innately resistant opportunistic pathogen commonly associated with debilitating respiratory infections in cystic fibrosis. Although a model platform, these results point to promising pathways to particle-based delivery of plant-derived extracts for a range of antimicrobial applications, including active packaging materials, topical antiseptics, and innovative therapeutics.

Visible-Light-Regulated Controlled/Living Radical Polymerization in Miniemulsion

The implementation of photopolymerization processes in aqueous dispersed systems has the potential to afford greener approaches to the preparation of polymeric materials and has motivated researchers to perform photopolymerization in emulsion. However, these previous works have employed UV irradiation to induce photodegradation of a photoinitiator in addition to specialized equipment setups, thus limiting widespread use of these approaches. In this work, we aim to remedy these drawbacks via the implementation of photoredox catalysis in the regulation of a controlled/living radical polymerization under visible light. Utilizing the photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) process, we report the miniemulsion polymerization of styrene mediated by a household grade blue LED (λ_max = 460 nm, 0.73 mW/cm²). The polymerization rate can be easily manipulated by light intensity and catalyst concentration. Finally, temporal control was demonstrated via ON/OFF experiments, which shows that no significant detriment is caused by prolonged interruptions to the light exposure.

Functional polymer particles via thiol–ene and thiol–yne suspension “click” polymerization

Highly functionalized, water-borne, micron-sized polymer particles were synthesized using thermally or photochemically initiated thiol–ene and thiol–yne “click” suspension polymerizations.