Catalytic functionalization of low reactive C(sp(3))-H and C(sp(2))-H bonds of alkanes and arenes by carbene transfer from diazo compounds

The Carbene Chemistry of N-Sulfonyl Hydrazones: The Past, Present, and Future

N-Sulfonyl hydrazones have been extensively used as operationally safe carbene precursors in modern organic synthesis due to their ready availability, facile functionalization, and environmental benignity. Over the past two decades, there has been tremendous progress in the carbene chemistry of N-sulfonyl hydrazones in the presence of transition metal catalysts, under metal-free conditions, or using photocatalysts under photoirradiation conditions. Many carbene transfer reactions of N-sulfonyl hydrazones are unique and cannot be achieved by any alternative methods. The discovery of novel N-sulfonyl hydrazones and the development of highly enantioselective new reactions and skeletal editing reactions represent the notable recent achievements in the carbene chemistry of N-sulfonyl hydrazones. This review describes the overall progress made in the carbene chemistry of N-sulfonyl hydrazones, organized based on reaction types, spotlighting the current state-of-the-art and remaining challenges to be addressed in the future. Special emphasis is devoted to identifying, describing, and comparing the scope and limitations of current methodologies, key mechanistic scenarios, and potential applications in the synthesis of complex molecules.

Alkanes C1-C6 C-H Bond Activation via a Barrierless Potential Energy Path: Trifluoromethyl Carbenes Enhance Primary C-H Bond Functionalization

In this mixed computational and experimental study, we report a catalytic system for alkane C1-C6 functionalization in which the responsible step for C-H bond activation shows no barrier in the potential energy path. DFT modeling of three silver-based catalysts and four diazo compounds led to the conclusion that the TpFAg═C(H)CF3 (TpF = fluorinated trispyrazolylborate ligand) carbene intermediates interact with methane without a barrier in the potential energy surface, a prediction validated by experimentation using N2═C(H)CF3 as the carbene source. The array of alkanes from propane to n-hexane led to the preferential functionalization of the primary sites with unprecedented values of selectivity for an acceptor diazo compound. The lack of those barriers implies that selectivity can no longer be controlled by differences in the energy barriers. Molecular dynamics calculations (with propane as the model alkane) are consistent with the preferential functionalization of the primary sites due to a higher concentration of such C-H bonds in the vicinity of the carbenic carbon atom.

In Situ Observation of Elusive Dirhodium Carbenes and Studies on the Innate Role of Carboxamidate Ligands in Dirhodium Paddlewheel Complexes: A Combined Experimental and Computational Approach

Carboxamidates as equatorial ligands in dirhodium paddlewheel catalysts are widely believed to increase selectivity at the expense of reactivity. The results of the combined experimental and computational approach described in this paper show that one has to beware of such generalizations. First, 103Rh NMR revealed how strongly primary carboxamidates impact the electronic nature of the rhodium center they are bound to; at the same time, such ligands stabilize donor/acceptor carbenes by engaging their ester carbonyl group into peripheral interligand hydrogen bonding. This array benefits selectivity as well as reactivity if maintained along the entire reaction coordinate of a catalytic cyclopropanation. In settings where the hydrogen bond needs to be distorted for the reaction to proceed, however, it constitutes a significant enthalpic handicap. Representative examples for each scenario were analyzed by DFT; in both cases, the cyclopropanation step rather than carbene formation was found to be turnover-limiting. While this conclusion somehow contradicts the literature, it implied that the direct observation of highly reactive dirhodium carbenes in truly catalytic settings might be possible, even though the intermediates carry olefinic sites amenable to intramolecular cyclopropanation. Such in situ monitoring by NMR is without precedent, yet it was successful with the homoleptic catalyst [Rh2(OPiv)4] as well as with its heteroleptic sibling [Rh2(OPiv)3(acam)] comprising an acetamidate (acam); in the latter case, the carbene bound to the rhodium atom at the [O3N]-face was observed, which concurs with the computational data that this species is stabilized by the forecited interligand hydrogen bonding.

Elucidating the Electronic Nature of Rh-based Paddlewheel Catalysts from 103 Rh NMR Chemical Shifts: Insights from Quantum Mechanical Calculations

The tremendous importance of dirhodium paddlewheel complexes for asymmetric catalysis is largely the result of an empirical optimization of the chiral ligand sphere about the bimetallic core. It was only recently that a H(C)Rh triple resonance 103 Rh NMR experiment provided the long-awaited opportunity to examine - with previously inconceivable accuracy - how variation of the ligands impacts on the electronic structure of such catalysts. The recorded effects are dramatic: formal replacement of only one out of eight O-atoms surrounding the metal centers in a dirhodium tetracarboxylate by an N-atom results in a shielding of the corresponding Rh-site of no less than 1000 ppm. The current paper provides the theoretical framework that allows this and related experimental observations made with a set of 19 representative rhodium complexes to be interpreted. In line with symmetry considerations, it is shown that the shielding tensor responds only to the donor ability of the equatorial ligands along the perpendicular principal axis. Axial ligands, in contrast, have no direct effect on shielding but may come into play via the electronicc i s ${cis}$ -effect that they exert onto the neighboring equatorial sites. On top of these fundamental interactions, charge redistribution within the core as well as the electronict r a n s ${trans}$ -effect of ligands of different donor strengths is reflected in the recorded 103 Rh NMR shifts.

Chemodivergent C(sp3)-H and C(sp2)-H Cyanomethylation Using Engineered Carbene Transferases

The ubiquity of C-H bonds presents an attractive opportunity to elaborate and build complexity in organic molecules. Methods for selective functionalization, however, often must differentiate among multiple chemically similar and, in some cases indistinguishable, C-H bonds. An advantage of enzymes is that they can be finely tuned using directed evolution to achieve control over divergent C-H functionalization pathways. Here, we demonstrate engineered enzymes that effect a new-to-nature C-H alkylation with unparalleled selectivity: two complementary carbene C-H transferases derived from a cytochrome P450 from Bacillus megaterium deliver an α-cyanocarbene into the α-amino C(sp3)-H bonds or the ortho-arene C(sp2)-H bonds of N-substituted arenes. These two transformations proceed via different mechanisms, yet only minimal changes to the protein scaffold (nine mutations, less than 2% of the sequence) were needed to adjust the enzyme's control over the site-selectivity of cyanomethylation. The X-ray crystal structure of the selective C(sp3)-H alkylase, P411-PFA, reveals an unprecedented helical disruption which alters the shape and electrostatics in the enzyme active site. Overall, this work demonstrates the advantages of enzymes as C-H functionalization catalysts for divergent molecular derivatization.

Intramolecular Interception of the Remote Position of Vinylcarbene Silver Complex Intermediates by C(sp3 )-H Bond Insertion

The trapping of the elusive vinylogous position of a vinyl carbene with an aliphatic C(sp³ )-H bond has been achieved for the first time during a silver-catalyzed carbene/alkyne metathesis (CAM) process. A Tp^x -containing silver complex first promotes the generation of a donor-acceptor silver carbene which triggers CAM, generating a subsequent donor-donor vinyl silver carbene species, which then undergoes a selective vinylogous C(sp³ )-H bond insertion, leading to the synthesis of a new family of benzoazepines. Density functional theory (DFT) calculations unveil the reaction mechanism, which allows proposing that the C-H bond insertion reaction takes place in a stepwise manner, with the hydrogen shift being the rate determining step.

Site-Selective C-H Allylation of Alkanes: Facile Access to Allylic Quaternary sp3 -Carbon Centers

The construction of allylic quaternary sp³ -carbon centers has long been a formidable challenge in transition-metal-catalyzed alkyl-allyl coupling reactions due to the severe steric hindrance. Herein, we report an effective carbene strategy that employs well-defined vinyl-N-triftosylhydrazones as a versatile allylating reagent to enable direct assembly of these medicinally desirable structural elements from low-cost alkane feedstocks. The reaction exhibited excellent site selectivity for tertiary C-H bonds, broad scope (>60 examples and >20 : 1:0 r. r.) and good efficiency, even on a gram-scale, making it a convenient alternative to the well-known Trost-Tsuji allylation reaction for the formation of alkyl-allyl bonds. Combined experimental and computational studies were employed to unravel the mechanism and origin of site- and chemoselectivity of the reaction.

Efficient Synthesis of Diaryl Quaternary Centers by Rh(II)/Xantphos Catalyzed Relay C-H Functionalization and Allylic Alkylation

A three-component reaction of N, N-disubstituted aniline, α-diazo ester, and an allylic electrophile has been realized by [Rh(II)]₂ /Xantphos catalysis, providing a direct access to various aniline derivatives bearing diaryl allylic quaternary centers in good yields. The synthetic utility of this protocol was demonstrated by facile derivatization of the products for preparation of biologically relevant molecules and structural scaffolds, which offers a high potential for increasing the molecular diversity. Mechanistic studies identified α, α-diarylacetate species as an active intermediate, thereby revealing the presence of a C(sp² )-H functionalization of aniline derivatives/allylic alkylation cascade in this attractive catalytic transformation.

Chiral Bismuth-Rhodium Paddlewheel Complexes Empowered by London Dispersion: The C-H Functionalization Nexus

Heterobimetallic [BiRh] tetracarboxylate catalysts endowed with 1,3-disilylated phenylglycine paddlewheels benefit from interligand London dispersion. They were originally designed for asymmetric cyclopropanation but are now shown to perform very well in asymmetric C-H functionalization reactions too. Because of the confined ligand sphere about the derived donor/acceptor carbenes, insertions into unhindered methyl groups are kinetically favored, although methylene units also react with excellent levels of asymmetric induction; even gaseous ethane is a suitable substrate. Moreover, many functional groups in both partners are tolerated. The resulting products are synthetically equivalent to the outcome of traditional asymmetric ester alkylation, allylation, benzylation, propargylation and aldol reactions and therefore constitute a valuable nexus to more conventional chemical logic.

Chemo- and Regioselective Multiple C(sp2 )-H Insertions of Malonate Metal Carbenes for Late-Stage Functionalizations of Azahelicenes

Chiral quinacridines react up to four times, step-by-step, with α-diazomalonates under RuII and RhII catalysis. By selecting the catalyst, [CpRu(CH3 CN)3 ][PF6 ] (Cp=cyclopentadienyl) or Rh2 (oct)4 , chemo and regioselective insertions of derived metal carbenes are achieved in favor of mono- or bis-functionalized malonate derivatives, respectively, (r.r.>49 : 1, up to 77 % yield, 12 examples). This multi-introduction of malonate groups is particularly useful to tune optical and chemical properties such as absorption, emission or Brønsted acidity but also cellular bioimaging. Density-functional theory further elucidates the origin of the carbene insertion selectivity and also showcases the importance of conformations in the optical response.

“Sandwich” Diimine‐Copper Catalysts for C−H Functionalization by Carbene Insertion

We report here "sandwich" diimine-copper(I) catalysts for C(sp³ )-H bond functionalization. Reactions of alkanes and ethers with trimethylsilyldiazomethane, ethyl diazoacetate, and trifluoromethyl-diazomethane have been demonstrated. We also report C(sp³ )-H bond methylation, benzylation, and diphenylmethylation by diazomethane, aryldiazomethanes, and diphenyldiazomethane. These reactions are rare examples of base-metal catalyzed, intermolecular C(sp³ )-H functionalizations by employing unactivated diazo compounds. Electrophilicity and unique steric environment of "sandwich"-copper catalysts are likely reasons for their catalytic efficiency.

Borane-catalyzed arylation of aryldiazoacetates with N,N-dialkylanilines

A selective arylation of donor-acceptor diazo compounds with aniline derivatives catalyzed by Lewis acidic boranes is developed. This simple reaction protocol provides an efficient method for the synthesis of diarylacetates under metal-free conditions.

Gold nanoparticle-catalysed functionalization of carbon-hydrogen bonds by carbene transfer reactions

Gold nanoparticles stabilized by NHC ligands and supported onto reduced graphene oxide (rGO) catalyse the functionalization of cyclohexane and benzene C-H bonds upon insertion of carbene CHCO₂Et (from N₂CHCO₂Et) groups. This is the first example in which such C_sp3-H or C_sp2-H bonds are functionalized with this strategy with nanoparticulated gold. This Au-NP@rGO material shows an exceptional activity, providing TON values 5-10 times higher than those already reported for molecular gold catalysts. Recyclability is also effective, reaching an accumulated TON value of 1400 after six consecutive uses.

Recent advances in transition-metal-catalyzed carbene insertion to C-H bonds

C-H functionalization has been emerging as a powerful method to establish carbon-carbon and carbon-heteroatom bonds. Many efforts have been devoted to transition-metal-catalyzed direct transformations of C-H bonds. Metal carbenes generated in situ from transition-metal compounds and diazo or its equivalents are usually applied as the transient reactive intermediates to furnish a catalytic cycle for new C-C and C-X bond formation. Using this strategy compounds from unactivated simple alkanes to complex molecules can be further functionalized or transformed to multi-functionalized compounds. In this area, transition-metal-catalyzed carbene insertion to C-H bonds has been paid continuous attention. Diverse catalyst design strategies, synthetic methods, and potential applications have been developed. This critical review will summarize the advance in transition-metal-catalyzed carbene insertion to C-H bonds dated up to July 2021, by the categories of C-H bonds from aliphatic C(sp³)-H, aryl (aromatic) C(sp²)-H, heteroaryl (heteroaromatic) C(sp²)-H bonds, alkenyl C(sp²)-H, and alkynyl C(sp)-H, as well as asymmetric carbene insertion to C-H bonds, and more coverage will be given to the recent work. Due to the rapid development of the C-H functionalization area, future directions in this topic are also discussed. This review will give the authors an overview of carbene insertion chemistry in C-H functionalization with focus on the catalytic systems and synthetic applications in C-C bond formation.

Transition-Metal-Catalyzed Annulations Involving the Activation of C(sp3 )-H Bonds

The selective functionalization of C(sp3 )-H bonds using transition-metal catalysis is among the more attractive transformations of modern synthetic chemistry. In addition to its inherent atom economy, such reactions open unconventional retrosynthetic pathways that can streamline synthetic processes. However, the activation of intrinsically inert C(sp3 )-H bonds, and the selection among very similar C-H bonds, represent highly challenging goals. In recent years there has been notable progress tackling these issues, especially with regard to the development of intermolecular reactions entailing the formation of C-C and C-heteroatom bonds. Conversely, the assembly of cyclic products from simple acyclic precursors using metal-catalyzed C(sp3 )-H bond activations has been less explored. Only recently has the number of reports on such annulations started to grow. Herein we give an overview of some of the more relevant advances in this exciting topic.

Rhodium-catalyzed denitrogenative gem-difunctionalization of pyridotriazoles with thioesters: formal carbene insertion into C(O)-S bonds

A formal carbene insertion into C(O)-S bonds to access α-quaternary pyridines was achieved via a rhodium(II)-catalyzed in situ formation of sulfonium ylides from pyridotriazoles with thioesters followed by acyl group migration. This protocol has enabled an efficient denitrogenative gem-acylthiolation of pyridotriazoles to incorporate an acyl, pyridyl, and sulfur-substituted quaternary carbon center with high selectivity, broad substrate scope, and good functional group tolerance.

Rh(iii)-Catalyzed C–C coupling of unactivated C(sp3)–H bonds with iodonium ylides for accessing all-carbon quaternary centers

Rhodium-catalyzed inert C(sp3)–H activation/carbene insertion has been realized, leading to the construction of all-carbon quaternary centers.

DFT study on Ir-quinoid catalyzed C-H functionalization: new radical reactivity or direct carbene transfer?

DFT methods are used to probe the mechanism of a newly developed Ir-quinoid catalyzed C(sp³)-H functionalization of 1,4 dienes. The lowest energy pathway proceeds via an old-school concerted C-H insertion as opposed to a unique hydrogen atom transfer process proposed previously. The concertedness of the reaction shows an intriguing dependence on sterics of the diene leading to either inserted or dehydrogenated products. We use these new insights to tune the axial ligand, and design a more efficient catalyst.

A New Ligand Design Based on London Dispersion Empowers Chiral Bismuth-Rhodium Paddlewheel Catalysts

Heterobimetallic bismuth-rhodium paddlewheel complexes with phenylglycine ligands carrying TIPS-groups at the meta-positions of the aromatic ring exhibit outstanding levels of selectivity in reactions of donor/acceptor and donor/donor carbenes; at the same time, the reaction rates are much faster and the substrate scope is considerably wider than those of previous generations of chiral [BiRh] catalysts. As shown by a combined experimental, crystallographic, and computational study, the new catalysts draw their excellent application profile largely from the stabilization of the chiral ligand sphere by London dispersion (LD) interactions of the peripheral silyl substituents.

Computational Insights into Different Mechanisms for Ag-, Cu-, and Pd-Catalyzed Cyclopropanation of Alkenes and Sulfonyl Hydrazones

The [2+1] cycloaddition reaction of a metal carbene with an alkene can produce important cyclopropane products for synthetic intermediates, materials, and pharmaceutical applications. However, this reaction is often accompanied by side reactions, such as coupling and self-coupling, so that the yield of the cyclopropanation product of non-silver transition-metal carbenes and hindered alkenes is generally lower than 50 %. To solve this problem, the addition of a low concentration of diazo compound (decomposition of sulfonyl hydrazones) to alkenes catalyzed by either CuOAc or PdCl₂ was studied, but side reactions could still not be avoided. Interestingly, however, the yield of cyclopropanation products for such hindered alkenes were as high as 99 % with AgOTf as a catalyst. To explain this unexpected phenomenon, reaction pathways have been computed for four different catalysts by using DFT. By combining the results of these calculations with those obtained experimentally, it can be concluded that the efficiency of the silver catalyst is due to the barrierless concerted cycloaddition step and the kinetic inhibition of side reactions by a high concentration of alkene.

Two Copper-Carbenes from One Diazo Compound

Many transition-metal complexes ML_n decompose diazo compounds N₂═CR¹R² generating metal-carbenes L_nM═CR¹R² which transfer the carbene group to other substrates, constituting an important tool in organic synthesis. All previous reports have shown that the CR¹R² fragment at the metal-carbene remains intact from the parent diazo compound. Herein we report the detection and isolation of a monosubstituted copper carbene where the CR¹R² ligand has undergone a modification from the initial diazo reagent. When Tp^MsCu(THF) (Tp^Ms = hydrotris(3-mesityl)pyrazolylborate ligand) was reacted with N,N-diethyl diazoacetamide [N₂═C(H)(CONEt₂)], the stable copper carbene Tp^MsCu═C(H)(NEt₂) was isolated, resulting from a decarbonylation process, with carbon monoxide being trapped as Tp^MsCu(CO). The simultaneous observation of products derived from the intramolecular carbene insertion reaction into C-H bonds demonstrates that the expected Tp^MsCu═C(H)(CONEt₂) complex is also formed. Experimental data, DFT calculations, and microkinetic models allow us to propose that the latter undergoes CO loss en route to the former.

Selective carbene transfer to amines and olefins catalyzed by ruthenium phthalocyanine complexes with donor substituents

Electron-rich ruthenium phthalocyanine complexes were evaluated in carbene transfer reactions from ethyl diazoacetate (EDA) to aromatic and aliphatic olefins as well as to a wide range of aromatic, heterocyclic and aliphatic amines for the first time. It was revealed that the ruthenium octabutoxyphthalocyanine carbonyl complex [(BuO)8Pc]Ru(CO) is the most efficient catalyst converting electron-rich and electron-poor aromatic olefins to cyclopropane derivatives with high yields (typically 80-100%) and high TON (up to 1000) under low catalyst loading and nearly equimolar substrate/EDA ratio. This catalyst shows a rare efficiency in the carbene insertion into amine N-H bonds. Using a 0.05 mol% catalyst loading, a high amine concentration (1 M) and 1.1 eq. of EDA, a number of structurally divergent amines were selectively converted to mono-substituted glycine derivatives with up to quantitative yields and turnover numbers reaching 2000. High selectivity, large substrate scope, low catalyst loading and practical reaction conditions place [(BuO)8Pc]Ru(CO) among the most efficient catalysts for the carbene insertion into amines.

Iron catalysts with N-ligands for carbene transfer of diazo reagents

This review provides an overview of the catalytic activity of iron complexes of nitrogen ligands in driving carbene transfers towards CC, C–H and X–H bonds. The reactivity of diazo reagents is discussed as well as the proposed reaction mechanisms.

Synthesis of naphtho[1′,2′:4,5]imidazo[1,2-a]pyridines via Rh(iii)-catalyzed C–H functionalization of 2-arylimidazo[1,2-a]pyridines with cyclic 2-diazo-1,3-diketones featuring with a ring opening and reannulation

An unprecedented synthesis of functionalized naphtho[1′,2′:4,5]imidazo[1,2-a]pyridines via rhodium-catalyzed cascade reactions of 2-arylimidazo[1,2-a]pyridine-3-carbaldehydes with cyclic α-diazo-1,3-diketones is presented.

Iron- and cobalt-catalyzed C(sp3)–H bond functionalization reactions and their application in organic synthesis

This review highlights the developments in iron and cobalt catalyzed C(sp³)–H bond functionalization reactions with emphasis on their applications in organic synthesis, i.e. natural products and pharmaceuticals synthesis and/or modification.

Finding Opportunities from Surprises and Failures. Development of Rhodium-Stabilized Donor/Acceptor Carbenes and Their Application to Catalyst-Controlled C-H Functionalization

Catalyst-controlled C-H functionalization by means of the C-H insertion chemistry of rhodium carbenes has become a powerful synthetic method. The key requirements for the development of this chemistry are donor/acceptor carbenes and the chiral dirhodium tetracarboxylate catalysts. This perspective will describe the stages involved in developing this chemistry and illustrate the scope of the donor/acceptor carbene C-H functionalization.

Methane functionalization in water with micellar catalysis

The functionalization of methane in water as the reaction medium (where it is nearly insoluble) at room temperature using micellar catalysis is described. Aggregates are formed from surfactant molecules and act as methane concentrators, also trapping the catalyst (a silver-based complex) and the diazo reagent (ethyl diazoacetate, EDA), providing yields of ethyl propionate up to 14% (referred to as EDA). This is the first example of methane being functionalized in water at room temperature.

Sulfhydryl-Directed Iridium-Catalyzed C-H/Diazo Coupling and Tandem Annulation of Naphthalene-1-thiols

The first sulfhydryl-directed iridium-catalyzed C-H/diazo coupling and tandem annulation of naphthalene-1-thiols has been developed. The framework of naphtho[1,8-bc]thiopyrans was constructed in a one-step reaction with good yields. This transformation provides a practical synthetic route for the widely used naphtho[1,8-bc]thiopyran derivatives.