A Series of Cyclopentadienyl Lanthanum Complexes with Metalloid Germanium Clusters

A series of cyclopentadienyllanthanum complexes with the disilylated metalloid germanium cluster [Ge9(Hyp)2]2- [Hyp = Si(SiMe3)3] has been prepared and fully characterized. The synthetic procedure is based on the salt metathesis reaction of two different cyclopentadienyllanthanum diiodides CpLaI2 (Cp: Cp*, pentamethylcyclopentadienyl; Cpttt, 1,2,4-tri-tert-butylcyclopentadienyl) with K2[Ge9(Hyp)2] in tetrahydrofuran (THF) with a subsequent extraction with n-hexane. The composition of the obtained compounds and the mode of coordination of the germanium cluster to the rare-earth metal are strongly influenced by the steric demand of the cyclopentadienyl ligands and the crystallization conditions. The centrosymmetric dimeric compounds with the common formula [CpLa(solv)(η2,3-Ge9(Hyp)2)]2 [1, Cp = Cp*, solv-THF; 2, Cp = Cpttt, solv-NCCH2C(Me)NSiMe3] have been isolated by the slow evaporation of a n-hexane solution, while a mononuclear complex [CptttLa(THF)2(η3-Ge9(Hyp)2)] (4) was found by crystallization from THF. The repeated recrystallization of 1 from n-hexane afforded the asymmetric dimer [Cp*La(THF)(η2,3-Ge9(Hyp)2)][Cp*La(η2,3-Ge9(Hyp)2)] (3) with only one coordinated THF molecule.

Electronic structure comparisons of isostructural early d- and f-block metal(iii) bis(cyclopentadienyl) silanide complexes

We report the synthesis of the U(iii) bis(cyclopentadienyl) hypersilanide complex [U(Cp'')2{Si(SiMe3)3}] (Cp'' = {C5H3(SiMe3)2-1,3}), together with isostructural lanthanide and group 4 M(iii) homologues, in order to meaningfully compare metal-silicon bonding between early d- and f-block metals. All complexes were characterised by a combination of NMR, EPR, UV-vis-NIR and ATR-IR spectroscopies, single crystal X-ray diffraction, SQUID magnetometry, elemental analysis and ab initio calculations. We find that for the [M(Cp'')2{Si(SiMe3)3}] (M = Ti, Zr, La, Ce, Nd, U) series the unique anisotropy axis is conserved tangential to ; this is governed by the hypersilanide ligand for the d-block complexes to give easy plane anisotropy, whereas the easy axis is fixed by the two Cp'' ligands in f-block congeners. This divergence is attributed to hypersilanide acting as a strong σ-donor and weak π-acceptor with the d-block metals, whilst f-block metals show predominantly electrostatic bonding with weaker π-components. We make qualitative comparisons on the strength of covalency to derive the ordering Zr > Ti ≫ U > Nd ≈ Ce ≈ La in these complexes, using a combination of analytical techniques. The greater covalency of 5f3 U(iii) vs. 4f3 Nd(iii) is found by comparison of their EPR and electronic absorption spectra and magnetic measurements, with calculations indicating that uranium 5f orbitals have weak π-bonding interactions with both the silanide and Cp'' ligands, in addition to weak δ-antibonding with Cp''.

[AnI3(THF)4] (An = Np, Pu) Preparation Bypassing An0 Metal Precursors: Access to Np3+/Pu3+ Nonaqueous and Organometallic Complexes

Direct comparison of homologous molecules provides a foundation from which to elucidate both subtle and patent changes in reactivity patterns, redox processes, and bonding properties across a series of elements. While trivalent molecular U chemistry is richly developed, analogous Np or Pu research has long been hindered by synthetic routes often requiring scarcely available metallic-phase source material, high-temperature solid-state reactions producing poorly soluble binary halides, or the use of pyrophoric reagents. The development of routes to nonaqueous Np³⁺/Pu³⁺ from widely available precursors can potentially transform the scope and pace of research into actinide periodicity. Here, aqueous stocks of An⁴⁺ (An = Np, Pu) are dehydrated to well-defined [AnCl₄(DME)₂] (DME = 1,2-dimethoxyethane), and then a single-step halide exchange/reduction employing Me₃SiI produces [AnI₃(THF)₄] (THF = tetrahydrofuran) in a high to nearly quantitative crystalline yield (with I₂ and Me₃SiCl as easily removed byproducts). We demonstrate the synthetic utility of these An-iodide molecules, prepared by metal⁰-free routes, through characterization of archetypal complexes including the tris-silylamide, [Np{N(SiMe₃)₂}₃], and bent metallocenes, [An(C₅Me₅)₂(I)(THF)] (An = Np, Pu)─chosen because both motifs are ubiquitous in Th, U, and lanthanide research. The synthesis of [Np{N(Se═PPh₂)₂}₃] is also reported, completing an isomorphous series that now extends from U to Am and is the first characterized Np³⁺-Se bond.

Lanthanocene and Cerocene Alkyl Complexes: Synthesis, Structure, and Reactivity Studies

Lanthanocene and cerocene alkyl complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(CH₂C₆H₄-o-NMe₂) (Ln = La 3 and Ce 4) were obtained from the salt metathesis of {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(μ₃-κ³-O₃SCF₃)₂K(THF)₂}₂·THF (Ln = La 1·THF and Ce 2·THF) with LiCH₂C₆H₄-o-NMe₂. Reactivity of 3 and 4 toward various small molecules provides access to a series of lanthanide derivatives. For example, reactions of 3 and 4 with elemental chalcogens (sulfur and selenium) in 1:1 molar ratio give the lanthanide thiolates {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(μ-SCH₂C₆H₄-o-NMe₂)}₂ (Ln = La 5 and Ce 6) and selenolates {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln(μ-SeCH₂C₆H₄-o-NMe₂)}₂ (Ln = La 7 and Ce 8). The compounds 3 and 4 react with two equivalents of elemental chalcogens (sulfur and selenium) to afford the lanthanide disulfides {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln}₂(μ-η²:η²-S₂) (Ln = La 9 and Ce 10) and diselenides {[η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln}₂(μ-η²:η²-Se₂) (Ln = La 11 and Ce 12). The lanthanide disulfides (9 and 10) or diselenides (11 and 12) can also be readily obtained through oxidation of the corresponding lanthanide thiolates (5 and 6) or selenolates (7 and 8) by elemental chalcogens concomitant with the (Me₂N-o-C₆H₄CH₂)₂E₂ (E = S or Se) release. Treatment of 3 and 4 with one equivalent or two equivalents of benzonitrile produces the serendipitous lanthanum and cerium-1-azaallyl complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln[N(H)C(Ph)═CHC₆H₄-o-NMe₂] (Ln = La 13 and Ce 14) or amidine complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln[N(H)C(Ph)NC(Ph)═CHC₆H₄-o-NMe₂]·C₇H₈ (Ln = La 15·C₇H₈ and Ce 16·C₇H₈), respectively. The compound 15 or 16 can also be readily synthesized by further insertion of one benzonitrile molecule into the 1-azaallyl complex 13 or 14. Insertion of N,N'-dicyclohexylcarbodiimide or phenyl isothiocyanate into Ln-C bonds within 3 and 4 results in the formation of the amidine complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln[CyNC(CH₂C₆H₄-o-NMe₂)NCy] (Cy = cyclohexyl, Ln = La 17 and Ce 18) or thioamidato complexes [η⁵-1,3-(Me₃C)₂C₅H₃]₂Ln[SC(CH₂C₆H₄-o-NMe₂)NPh] (Ln = La 19 and Ce 20). All of the new compounds were characterized by various spectroscopic methods, and their solid-state structures were further confirmed by single-crystal X-ray diffraction analyses.

Small-Scale Metal-Based Syntheses of Lanthanide Iodide, Amide, and Cyclopentadienyl Complexes as Analogues for Transuranic Reactions

Small-scale reactions of the Pu analogues La, Ce, and Nd have been explored in order to optimize reaction conditions for milligram scale reactions of radioactive plutonium starting from the metal. Oxidation of these lanthanide metals with iodine in ether and pyridine has been studied, and LnI₃(Et₂O)_x (1-Ln; x = 0.75-1.9) and LnI₃(py)₄ (2-Ln; py = pyridine, NC₅H₅) have been synthesized on scales ranging from 15 mg to 2 g. The THF adducts LnI₃(THF)₄ (3-Ln) were synthesized by dissolving 1-Ln in THF. The viability of these small-scale samples as starting materials for amide and cyclopentadienyl f-element complexes was tested by reacting KN(SiMe₃)₂, KCp' (Cp' = C₅H₄SiMe₃), KCp'' (Cp'' = C₅H₃(SiMe₃)₂-1,3), and KC₅Me₄H with 1-Ln generated in situ. These reactions produced Ln[N(SiMe₃)₂]₃ (4-Ln), Cp'₃Ln (5-Ln), Cp″₃Ln (6-Ln), and (C₅Me₄H)₃Ln (7-Ln), respectively. Small-scale samples of Cp'₃Ce (5-Ce) and Cp'₃Nd (5-Nd) were reduced with potassium graphite (KC₈) in the presence of 2.2.2-cryptand to check the viability of generating the crystallographically characterizable Ln²⁺ complexes [K(2.2.2-cryptand)][Cp'₃Ln] (8-Ln; Ln = Ce, Nd).