Two decades of recent advances of Passerini reactions: synthetic and potential pharmaceutical applications

This perspective describes the applications of Passerini reactions in the last two decades from 2000 to 2021 in pharmaceutical applications and synthesis of peptides, natural products, macrocycles, dendrimers, and versatile types of heterocycles.

Janus All-Cis 2,3,4,5,6-Pentafluorocyclohexyl Building Blocks Applied to Medicinal Chemistry and Bioactives Discovery Chemistry

Monoalkylated derivatives of the unusually polar all‐cis 2,3,4,5,6‐ pentafluorocyclohexyl (Janus face) motif are prepared starting from an aryl hydrogenation of 2,3,4,5,6‐ pentafluorophenylacetate methyl ester 15. The method used Zeng's Rh(CAAC) carbene catalyst 4 in the hydrogenation following the protocol developed by Glorius. The resultant Janus pentafluorocyclohexylacetate methyl ester 16 was converted to the corresponding alcohol 18, aldehyde 13, bromide 29 and azide 14 through functional group manipulations, and some of these building blocks were used in Ugi‐multicomponent and Cu‐catalysed click reactions. NBoc protected pentafluoroarylphenylalanine methyl ester 35 was also subject to an aryl hydrogenation, and then deprotection to generate the Janus face β‐pentafluorocyclohexyl‐alanine amino acid 15, which was incorporated into representative members of an emerging class of candidate antiviral compounds. Log P measurements demonstrate that the all‐cis 2,3,4,5,6‐pentafluorocyclohexyl ring system is more polar than a phenyl ring. In overview the paper introduces new building blocks containing this Janus ring and demonstrates their progression to molecules typically used in bioactives discovery programmes.

Halting colorectal cancer metastasis via novel dual nanomolar MMP-9/MAO-A quinoxaline-based inhibitors; design, synthesis, and evaluation

Matrix metalloproteinase-9 (MMP-9) and monoamine oxidase-A (MAO-A) are central signaling nodes in CRC and promotors of distant metastasis associated with high mortality rates. Novel series of quinoxaline-based dual MMP-9/MAO-A inhibitors were synthesized to suppress CRC progression. The design rationale combines the thematic pharmacophoric features of MMP-9 and MAO-A inhibitors in hybrid scaffolds. All derivatives were initially screened via MTT assay for cytotoxic effects on normal colonocytes to assess their safety profiles, then evaluated for their anticancer potential on HCT116 cells overexpressing MMP-9 and MAO-A. The most promising derivatives 8, 16, 17, 19, and 28 exhibited single digit nanomolar IC₅₀ against HCT116 cells within their safe doses (EC₁₀₀) on normal colonocytes. They suppressed HCT116 cell migration by 73.32, 61.29, 21.27, 28.82, and 27.48%, respectively as detected by wound healing assay. Enzymatic assays revealed that the selected derivatives were superior to the reference MMP-9 and MAO-A inhibitors (quercetin and clorgyline, respectively). The nanomolar dual MMP-9/MAO-A inhibitor 19 was identified as the most potent and balanced dual inhibitor among the evaluated series with considerable selectivity against MAO-A over MAO-B. Besides, qRT-PCR analysis was conducted to explore the hit compounds' potential to downregulate hypoxia-inducing factor (HIF-1α) in HCT116 cells being correlated with MAO-A mediated CRC migration and invasion. The five above-mentioned compounds significantly downregulated HIF-1α by more than 5 folds. Docking simulations predicted their possible binding modes with MMP-9 and MAO-A and highlighted their essential structural features. Finally, they recorded drug-like in silico physicochemical parameters and ADMET profiles.

Fluorinated Rings: Conformation and Application

The introduction of fluorine atoms into molecules and materials across many fields of academic and industrial research is now commonplace, owing to their unique properties. A particularly interesting feature is the impact of fluorine substitution on the relative orientation of a C-F bond when incorporated into organic molecules. In this Review, we will be discussing the conformational behavior of fluorinated aliphatic carbo- and heterocyclic systems. The conformational preference of each system is associated with various interactions introduced by fluorine substitution such as charge-dipole, dipole-dipole, and hyperconjugative interactions. The contribution of each interaction on the stabilization of the fluorinated alicyclic system, which manifests itself in low conformations, will be discussed in detail. The novelty of this feature will be demonstrated by presenting the most recent applications.

Two decades of recent advances of Ugi reactions: synthetic and pharmaceutical applications

Multicomponent reactions (MCRs) are powerful synthetic tools in which more than two starting materials couple with each other to form multi-functionalized compounds in a one-pot process, the so-called "tandem", "domino" or "cascade" reaction, or utilizing an additional step without changing the solvent, the so-called a sequential-addition procedure, to limit the number of synthetic steps, while increasing the complexity and the molecular diversity, which are highly step-economical reactions. The Ugi reaction, one of the most common multicomponent reactions, has recently fascinated chemists with the high diversity brought by its four- or three-component-based isonitrile. The Ugi reaction has been introduced in organic synthesis as a novel, efficient and useful tool for the preparation of libraries of multifunctional peptides, natural products, and heterocyclic compounds with stereochemistry control. In this review, we highlight the recent advances of the Ugi reaction in the last two decades from 2000-2019, mainly in the synthesis of linear or cyclic peptides, heterocyclic compounds with versatile ring sizes, and natural products, as well as the enantioselective Ugi reactions. Meanwhile, the applications of these compounds in pharmaceutical trials are also discussed.

Synthesis of complex unnatural fluorine-containing amino acids

The area of fluorinated amino acid synthesis has seen rapid growth over the past decade. As reports of singly fluorinated natural amino acid derivatives have grown, researchers have turned their attention to develop methodology to access complex proteinogenic examples. A variety of reaction conditions have been employed in this area, exploiting new advances in the wider synthetic community such as photocatalysis and palladium cross-coupling. In addition, novel fluorinated functional groups have also been incorporated into amino acids, with SFX and perfluoro moieties now appearing with more frequency in the literature. This review focuses on synthetic methodology for accessing complex non-proteinogenic amino acids, along with amino acids containing multiple fluorine atoms such as CF3, SF5 and perfluoroaromatic groups.

Fluorinated phenylalanines: synthesis and pharmaceutical applications

Recent advances in the chemistry of peptides containing fluorinated phenylalanines (Phe) represents a hot topic in drug research over the last few decades. ᴅ- or ʟ-fluorinated phenylalanines have had considerable industrial and pharmaceutical applications and they have been expanded also to play an important role as potential enzyme inhibitors as well as therapeutic agents and topography imaging of tumor ecosystems using PET. Incorporation of fluorinated aromatic amino acids into proteins increases their catabolic stability especially in therapeutic proteins and peptide-based vaccines. This review seeks to summarize the different synthetic approaches in the literature to prepare ᴅ- or ʟ-fluorinated phenylalanines and their pharmaceutical applications with a focus on published synthetic methods that introduce fluorine into the phenyl, the β-carbon or the α-carbon of ᴅ-or ʟ-phenylalanines.

Polar Organofluorine Substituents: Multivicinal Fluorines on Alkyl Chains and Alicyclic Rings

This Review outlines the progression, primarily of our own work, but with important contributions from other labs, on the synthesis and properties of multiple vicinally fluorinated alkyl chains and rings. Chain conformations of individual diastereoisomers with -CHF- at adjacent carbons are influenced by stereoelectronic factors associated with the polar C-F bond and the polarised geminal hydrogens. Generally, the chain will prefer a conformation which acts to minimise overall molecular polarity, and where the C-F bonds orient away from each other. However, when vicinal fluorine atoms are positioned on a ring then conformations are more constrained. The ring will adopt optimal conformations such as a chair in cyclohexane and then C-F bonds can be introduced with a stereochemistry that forces parallel (axial) orientations. In the case of cyclohexane, 1,3-diaxial arrangements of C-F bonds impart considerable polarity to the ring, resulting in an electronegative 'fluorine face' and an electropositive 'hydrogen face'. For all-syn 1,2,3,4,5,6-hexafluorocyclohexane, this arrangement generates an unusually polar aliphatic ring system. Most recently the concept has been extended to the preparation of all-syn 1,2,3-trifluorocyclopropanes, a rigid ring system with fluorine atoms on one face and hydrogens on the other. Lipophilicity Log P values of such compounds indicate that they are significantly more polar than their parent alicyclic hydrocarbons and give some positive indication for a future role of such substituents in medicinal chemistry. Expanding to such a role will require access to improved synthesis methods to these motifs and consequently access to a broader a range of building blocks, however some exciting new methods have emerged recently and these are briefly reviewed.

Kitamura Electrophilic Fluorination Using HF as a Source of Fluorine

This review article focused on the innovative procedure for electrophilic fluorination using HF and in situ generation of the required electrophilic species derived from hypervalent iodine compounds. The areas of synthetic application of this approach include fluorination of 1,3-dicarbonyl compounds, aryl-alkyl ketones, styrene derivatives, α,β-unsaturated ketones and alcohols, homoallyl amine and homoallyl alcohol derivatives, 3-butenoic acids and alkynes.

Preparative Method for Asymmetric Synthesis of (S)-2-Amino-4,4,4-trifluorobutanoic Acid

Enantiomerically pure derivatives of 2-amino-4,4,4-trifluorobutanoic acid are in great demand as bioisostere of leucine moiety in the drug design. Here, we disclose a method specifically developed for large-scale (>150 g) preparation of the target (S)-N-Fmoc-2-amino-4,4,4-trifluorobutanoic acid. The method employs a recyclable chiral auxiliary to form the corresponding Ni(II) complex with glycine Schiff base, which is alkylated with CF3-CH2-I under basic conditions. The resultant alkylated Ni(II) complex is disassembled to reclaim the chiral auxiliary and 2-amino-4,4,4-trifluorobutanoic acid, which is in situ converted to the N-Fmoc derivative. The whole procedure was reproduced several times for consecutive preparation of over 300 g of the target (S)-N-Fmoc-2-amino-4,4,4-trifluorobutanoic acid.

Battle tactics against MMP-9; discovery of novel non-hydroxamate MMP-9 inhibitors endowed with PI3K/AKT signaling attenuation and caspase 3/7 activation via Ugi bis-amide synthesis

Matrix metalloproteinases (MMPs) are major modulators of the tumor microenvironment. They participate in extracellular matrix turnover, tumor growth, angiogenesis and metastasis. Accordingly, MMPs inhibition seems to be ideal solution to control cancer. Many MMPs inhibitors have been introduced ranging from hydroxamate-based peptidomimetics to the next generation non-hydroxamate inhibitors. Among MMPs, MMP-9 is attractive druggable anticancer target. Studies showed that inhibiting AKT, the central signaling node of MMP-9 upregulation, provides additional MMP-9 blockade. Furthermore, caspase-dependent AKT cleavage leads to cell death. Herein, Ugi MCR was utilized as a rapid combinatorial approach to generate various decorated bis-amide scaffolds as dual MMP-9/AKT inhibitors endowed with caspase 3/7 activation potential. The target adducts were designed to mimic the thematic structural features of non-hydroxamate MMP inhibitors. p-Nitrophenyl isonitrile 1 was utilized as structure entry to Ugi products with some structural similarities to amide-based caspase 3/7 activators. Besides, various acids, amines and aldehydes were employed as Ugi educts to enrich the SAR data. All adducts were screened for cytotoxicity against normal fibroblasts and three cancer cell lines; MCF-7, NFS-60 and HepG-2 utilizing MTT assay. 8, 11 and 28 were more active and safer than doxorubicin with single-digit nM IC₅₀ and promising selectivity. Mechanistically, they exhibited dual MMP-9/AKT inhibition at single-digit nM IC₅₀ with excellent selectivity over MMP-1,-2 and -13, and induced >51% caspase 3/7 activation. Consequently, they induced >49% apoptosis as detected by flow cytometric analysis, and inhibited cell migration (metastasis) up to 97% in cancer cells. Docking simulations were nearly consistent with enzymatic evaluation, also declared possible binding modes and essential structure features of active compounds. In silico physicochemical properties, ligand efficiency and drug-likeness metrics were reasonable for all adducts. Interestingly, 8 and 28 can be considered as drug-like candidates.

Applications of fluorine-containing amino acids for drug design

Fluorine-containing amino acids are becoming increasingly prominent in new drugs due to two general trends in the modern pharmaceutical industry. Firstly, the growing acceptance of peptides and modified peptides as drugs; and secondly, fluorine editing has become a prevalent protocol in drug-candidate optimization. Accordingly, fluorine-containing amino acids represent one of the more promising and rapidly developing areas of research in organic, bio-organic and medicinal chemistry. The goal of this Review article is to highlight the current state-of-the-art in this area by profiling 42 selected compounds that combine fluorine and amino acid structural elements. The compounds under discussion represent pharmaceutical drugs currently on the market, or in clinical trials as well as examples of drug-candidates that although withdrawn from development had a significant impact on the progress of medicinal chemistry and/or provided a deeper understanding of the nature and mechanism of biological action. For each compound, we present features of biological activity, a brief history of the design principles and the development of the synthetic approach, focusing on the source of tailor-made amino acid structures and fluorination methods. General aspects of the medicinal chemistry of fluorine-containing amino acids and synthetic methodology are briefly discussed.

Practical Method for Preparation of (S)-2-Amino-5,5,5-trifluoropentanoic Acid via Dynamic Kinetic Resolution

This work reports an operationally convenient ∼20 g scale synthesis of (S)-2-amino-5,5,5-trifluoropentanoic acid and its Fmoc-derivative via dynamic kinetic resolution of the corresponding racemate.

Benzylic Functionalisation of Phenyl all-cis-2,3,5,6-Tetrafluorocyclohexane Provides Access to New Organofluorine Building Blocks

Selectively fluorinated hydrocarbons continue to attract attention for tuning pharmacokinetic properties in agrochemical and pharmaceutical discovery programmes. This study identifies benzylic bromination of phenyl all-cis-2,3,5,6-tetrafluorocyclohexane 2 as a key reaction for accessing building blocks containing the all-cis-2,3,5,6-tetrafluorocyclohexane ring system. These cyclohexanes are of interest as the fluorines are only on one face of the cyclohexane, and this imparts an unusual polar aspect, very different to an otherwise hydrophobic cyclohexane. Ritter type reactions of benzyl bromide 4 with DMF and acetonitrile generated the corresponding benzyl alcohol 6 and benzylacetamide 7 respectively. Benzylacetamide 7 was hydrolysed to benzyl amine 8 and syn-amino-alcohol 9, and separately the phenyl ring was oxidatively cleaved to furnish carboxylic acid acetamide 10, which after hydrolysis gave the tetrafluorocyclohexyl amino acid 11. A trans-halogenation of benzylbromide 4 with AgF₂ gave benzyl fluoride 13. Oxidative cleavage of the aryl ring then gave pentafluorocyclohexyl carboxylic acid 14. This carboxylic acid was readily converted to amides 23-26 and the preferred conformations of these α-fluoroamides were explored by DFT, X-ray structure and ¹ H-¹⁹ F HOESY NMR analysis.

Expanding beyond canonical metabolism: Interfacing alternative elements, synthetic biology, and metabolic engineering

Metabolic engineering offers an exquisite capacity to produce new molecules in a renewable manner. However, most industrial applications have focused on only a small subset of elements from the periodic table, centered around carbon biochemistry. This review aims to illustrate the expanse of chemical elements that can currently (and potentially) be integrated into useful products using cellular systems. Specifically, we describe recent advances in expanding the cellular scope to include the halogens, selenium and the metalloids, and a variety of metal incorporations. These examples range from small molecules, heteroatom-linked uncommon elements, and natural products to biomining and nanotechnology applications. Collectively, this review covers the promise of an expanded range of elemental incorporations and the future impacts it may have on biotechnology.

Metabolism and hydrophilicity of the polarised 'Janus face' all-cis tetrafluorocyclohexyl ring, a candidate motif for drug discovery

The metabolism and polarity of the all-cis tetra-fluorocyclohexane motif is explored in the context of its potential as a motif for inclusion in drug discovery programmes. Biotransformations of phenyl all-cis tetra-, tri- and di- fluoro cyclohexanes with the human metabolism model organism Cunninghamella elegans illustrates various hydroxylated products, but limited to benzylic hydroxylation for the phenyl all-cis tetrafluorocyclohexyl ring system. Evaluation of the lipophilicities (log P) indicates a significant and progressive increase in polarity with increasing fluorination on the cyclohexane ring system. Molecular dynamics simulations indicate that water associates much more closely with the hydrogen face of these Janus face cyclohexyl rings than the fluorine face owing to enhanced hydrogen bonding interactions with the polarised hydrogens and water.

Fluorinated liquid crystals: evaluation of selectively fluorinated facially polarised cyclohexyl motifs for liquid crystal applications

This paper explores the synthesis of a series of prototype negative dielectric liquid crystalline (LC) compounds which contain fluorinated cyclohexane motifs. The series are analogues and differ only in that they contain between one to four fluorine atoms. The stereochemistry is such that all of the fluorines/C-F bonds are on one face of the cyclohexane ring. This follows from the recent recognition that cyclohexanes with fluorines orientated in one direction, perpendicular to the ring have a strong molecular dipole, a characteristic that might be an advantage in the design of negative dielectric materials. However it is found that the increased polarity, particularly with two or more oriented C-F bonds, leads to higher melting points and poorer solubility in test matrix formulations, relative to hydrocarbon liquid crystals. This arises due to electrostatic intermolecular interactions between the polarised cyclohexyl and aryl rings. The study highlights that in order to take advantage of these polar cyclohexane motifs for liquid crystal design, appropriate scaffolds are required which are free of aromatic rings and contain peripheral solubilising motifs.

Fluorinated cyclopropanes: synthesis and chemistry of the aryl α,β,β-trifluorocyclopropane motif

A general route to aryl α,β,β-trifluorocyclopropanes is reported and aryl oxidation gave the corresponding α,β,β-trifluorocyclopropane carboxylic acid.

Acyclic αγα-Tripeptides with Fluorinated- and Nonfluorinated-Furanoid Sugar Framework: Importance of Fluoro Substituent in Reverse-Turn Induced Self-Assembly and Transmembrane Ion-Transport Activity

Acyclic αγα-tripeptides derived from fluorinated-furanoid sugar amino acid frameworks act as reverse-turn inducers with a U-shaped conformation, whereas the corresponding nonfluorinated αγα-tripeptides show random peptide conformations. The NMR studies showed the presence of bifurcated weak intramolecular hydrogen bonding (F···HN) and N⁺···F^δ- charge-dipole attraction compel the amide carbonyl groups to orient antiperiplanar to the C-F bond, thus, demonstrating the role of the fluorine substituent in stabilizing the U-shaped conformation. The NOESY data indicate that the U-shaped tripeptides self-assembly formation is stabilized by the intermolecular hydrogen bonding between C═O···HN with antiparallel orientation. This fact is supported by ESI-MS data, which showed mass peaks up to the pentameric self-assembly, even in the gas phase. The morphological analysis by FE-SEM, on solid samples, showed arrangement of fibers into nanorods. The antiparallel self-assembled pore of the fluorinated tripeptides illustrates the selective ion-transport activity. The experimental findings were supported by DFT studies.

Fluorinated cyclohexanes: Synthesis of amine building blocks of the all-cis 2,3,5,6-tetrafluorocyclohexylamine motif

This paper reports the synthesis of three amine stereoisomers 5a–c of the tetrafluorocyclohexyl ring system, as building blocks for discovery chemistry programmes. The synthesis starts from a Birch reduction of benzonitrile, followed by an in situ methyl iodide quench. The resultant 2,5-cyclohexadiene was progressed via double epoxidations and then hydrofluorination ring opening reactions. The resultant fluorohydrin moieties were then converted to different stereoisomers of the tetrafluorocyclohexyl ring system, and then reductive hydrogenation of the nitrile delivered three amine stereoisomers. It proved necessary to place a methyl group on the cyclohexane ring in order to stabilise the compound against subsequent HF elimination. The two all-cis tetrafluorocyclohexyl isomers 5a and 5b constitute facially polarized cyclohexane rings, with fluorines on the electronegative face and hydrogens on the electropositive face.

Multicomponent reactions of methyl substituted all-cis tetrafluorocyclohexane aldehydes

Syntheses of all-cis tetrafluorocyclohexyl aldehydes are demonstrated with a methyl blocking group to allow their use in Ugi multicomponent reactions.

Selectively fluorinated cyclohexane building blocks: Derivatives of carbonylated all-cis-3-phenyl-1,2,4,5-tetrafluorocyclohexane

Palladium catalysed carbonylation reactions using the meta- and para-iodo derivatives of all-cis-3-phenyl-1,2,4,5-tetrafluorocyclohexane (4) are illustrated as the start point for a variety of functional group interconversions. The resultant benzaldehyde and benzoic acids offer novel building blocks for further derivatisation and facilitate the incorporation of the facially polarised all-cis-1,2,4,5-tetrafluorocyclohexane motif into more advanced molecular scaffolds.