Triplet state dissolved organic matter in aquatic photochemistry: reaction mechanisms, substrate scope, and photophysical properties

Participation of strong charge-assisted hydrogen bonds in interactions of dissolved organic matter represented by Suwannee River Humic Acid

Terrestrial dissolved organic matter (DOM) plays critical roles in many biotic and abiotic environmental reactions as well as in water treatment. Its structure is therefore of great interest. We examined dissolved Suwannee River Humic Acid (HA) to probe the potential participation of exceptionally strong, negative charge-assisted hydrogen bonds, (-)CAHB, in DOM cohesion and interaction with small weak acids using high performance size exclusion chromatography (HPSEC), transmission electron microscopy, zeta-pH curves, and pH drift experiments. The results support a previously proposed two-tier state of aggregation, in which tightly-knit primary particles (≤ ∼10 kDa) form larger secondary aggregates (up to micrometer in size). Evidence for (-)CAHB is gained through zeta potential changes and pH drift experiments. The primary particles interact with (-)CAHB-capable solutes (simple carboxylic acids and phosphate) but not (-)CAHB-incapable solutes. We identified disruption of intra-segmental and inter-molecular (-)CAHB leading to swelling and disaggregation, as well as formation of nouveau (-)CAHB with free groups on HA. The effects were solute-concentration dependent and greater at pH 5 than pH 6, consistent with CAHB theory. Phosphate induced the greatest shifts in the HPSEC molecular size distribution curves. The shifts were unaffected by prior stripping of innate polyvalent metals. We conclude that the (-)CAHB contributes to the cohesion of DOM, affecting its size and charge, and provides a means by which weak acid pollutants, nutrients, and natural compounds can interact with DOM. Such interactions have implications for the behavior of DOM in the environment, the fate and transport of anthropogenic pollutants, and the roles DOM play in water treatment technologies.

Solar-driven environmental fate of chlorinated parabens in natural and engineered water systems

Parabens are classified as emerging contaminants in global waters, and the ubiquitous emergence of their high-risk chlorinated products generated from chlorine-based wastewater disinfection has attracted increasing attention. However, rather limited information is available on their photofate after discharging into surface waters, and their degradation behavior after solar-based engineering water treatment is unclear. Herein, the reactivity of four chlorinated parabens with different photochemically produced reactive intermediates was measured. Quantitative contribution analysis in abating such compounds showed the dominance of direct photolysis in sunlit natural freshwaters. Introducing a technical solar/peroxymonosulfate (PMS) system could greatly improve the removal of chlorinated parabens. The economic analysis suggested that chlorinated parabens exhibited a minimum value of economic input as 93.41-158.04 kWh m-3 order-1 at 0.543-0.950 mM PMS. The high-resolution mass spectrometry analysis of the degradation products suggested that dechlorination, hydroxylation, and ester chain cleavage were the dominant transformation pathways during photolysis and solar/PMS treatment. Furthermore, the in silico prediction indicated severe aquatic toxicity of certain products but enhanced biodegradability. Overall, this investigation filled a knowledge gap on the reactivity of chlorinated parabens with diverse reactive transients and their quantitative contributions to the photolysis and solar/PMS treatment of emerging micropollutants in water.

Dual role of dissolved black carbon in sensitized ofloxacin photooxidation: Mechanism and influential factors

Dissolved black carbon (DBC) is the more photoactive component of dissolved organic matter (DOM) pool, which plays a dual role in the photoconversion of aquatic contaminants, acting as both a photosensitizer and an inhibitor. However, little is known about the more systematic mechanism by which DBC exhibits a dual effect, which is closely related to the structure composition of DBC. In this study, the differences in characteristics of DBC obtained from 300 °C and 500 °C were compared via UV-vis absorption spectrum, Fluorescence excitation emission matrix spectra (3D-EEM), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS), and evaluated the promoting and inhibiting effects of DBC on ofloxacin (OFL) photodegradation. It was found that higher pyrolysis temperature reduced the UV absorbance, molecular weight, aromaticity, and phenolics of DBC while increasing the content of quinone/aromatic ketone and humic substances. Photochemical data showed that 3DBC*, 1O2 and ·OH were all participated in the DBC-mediated OFL photodegradation. Wherein, DBC300 (DBCT, where T = pyrolysis temperature) had strong light screening and dynamic quenching effect, but the formation ability of 3DBC*, 1O2 and ·OH was poor, which significantly retarded the photodegradation of OFL. While DBC500 exhibited a slight promotion effect due to its higher formation ability of reactive species and weak light screening effect. Moreover, DBC500 had higher steady-state concentration and (kOFL,3DBC⁎) than DBC300, which might be due to the higher contents of quinone/aromatic ketone and the lower contents of phenol in DBC500, thus enhancing the reactivity of 3DBC* and OFL. Our research systematically revealed the trade-off mechanism of DBC on the photodegradation of fluoroquinolones, and provided an important theoretical guidance for the photodegradation of fluoroquinolones under the evolution of DBC composition.

Efficient Energy and Electron Transfer Photocatalysis with a Coulombic Dyad

Photocatalysis holds great promise for changing the way value-added molecules are currently prepared. However, many photocatalytic reactions suffer from quantum yields well below 10%, hampering the transition from lab-scale reactions to large-scale or even industrial applications. Molecular dyads can be designed such that the beneficial properties of inorganic and organic chromophores are combined, resulting in milder reaction conditions and improved reaction quantum yields of photocatalytic reactions. We have developed a novel approach for obtaining the advantages of molecular dyads without the time- and resource-consuming synthesis of these tailored photocatalysts. Simply by mixing a cationic ruthenium complex with an anionic pyrene derivative in water a salt bichromophore is produced owing to electrostatic interactions. The long-lived organic triplet state is obtained by static and quantitative energy transfer from the preorganized ruthenium complex. We exploited this so-called Coulombic dyad for energy transfer catalysis with similar reactivity and even higher photostability compared to a molecular dyad and reference photosensitizers in several photooxygenations. In addition, it was shown that this system can also be used to maximize the quantum yield of photoredox reactions. This is due to an intrinsically higher cage escape quantum yield after photoinduced electron transfer for purely organic compounds compared to heavy atom-containing molecules. The combination of laboratory-scale as well as mechanistic irradiation experiments with detailed spectroscopic investigations provided deep mechanistic insights into this easy-to-use photocatalyst class.

Insights into the photoreactivity mechanisms of micro-sized rubber particles with different structure: The crucial role of reactive oxygen species and released dissolved organic matter

Micro-sized rubber particles (MRPs), as a significant component of tire wear particles (TWPs), increasingly garnered attention due to the potential ecological risks. However, the impact of photoaging of MRPs and the characteristics of the dissolved organic matter (DOM) derived from MRPs on the photoreactivity of co-existing pollutants is remain unclear. To bridge this knowledge gap, this study selected MRPs with different structure including butadiene rubber (BR), styrene butadiene rubber (SBR) and nitrile butadiene rubber (NBR) and took tetracycline (TC) as the target pollutant to firstly study potential effects of structural characteristics and active components of MRPs on TC photodegradation process under simulated sunlight irradiation. The results indicated that BR, NBR and SBR enhanced TC photodegradation to varying extents, with SBR having the most pronounced effect. This effect was attributed mainly to the high electron transport capacity and the generation of more triple excited DOM (3DOM*) of SBR, thereby producing more active species (•OH and 1O2) and significantly promoting TC photodegradation. Additionally, the unsaturated bonds and aromatic groups in MRPs-DOM was identified as another crucial factor influencing their photoreactivity. This study will provide a new perspective for understanding the potential ecological effects between MRPs and co-existing pollutants in the natural environment.

Cyanohydrin Equilibria Implicate Non-Aromatic Aldehydes in Photochemical Production of Oceanic Carbon Monoxide

Carbonyls have previously been dismissed as significant precursors for carbon monoxide (CO) photoproduction from natural chromophoric dissolved organic matter (CDOM). Here, we used hydrogen cyanide (HCN), which reacts with carbonyls to form photochemically inert cyanohydrins, as a probe to re-examine the role of carbonyls in CO photoproduction. Adding HCN to low-absorbance euphotic zone seawater decreased CO photoproduction. Modeling [HCN] (∼5 to 364 μM) vs the percent decrease in CO photoproduction (%CO↓) yielded carbonyl-cyanohydrin dissociation equilibrium constants, KD, and maximum %CO↓, %CO↓max values. Four Atlantic and Pacific seawater KDs (66.7 ± 19.6 μM) overlap aqueous aliphatic but not aromatic aldehyde KDs. Phenylacetaldehyde (PA) and other β,γ-unsaturated aldehydes are proposed as prototypical CO precursors. Direct photolysis of ∼10 nM PA can supply the measured daily production of HCN-sensitive CO at an open-ocean site near Bermuda. HCN's %CO↓max was 31 ± 2.5% in North Atlantic seawater vs the 13 ± 2.5% inhibition of CO photoproduction by borohydride, a dilemma since only borohydride affects most ketones. Borohydride also decreased CDOM absorption much more than did HCN. This puzzle probably reflects differing steric and solvation requirements in HCN- and borohydride-CDOM reactions. This study demonstrates cyanophilic aldehydes to be a significant source of open-ocean CO and reveals new clues regarding CDOM photochemistry mechanisms.

Molecular Insights into the Quenching Mechanism of the Triplet Excited State of Rose Bengal through Oxidative and Reductive Organic Compounds

In oxygenated aquatic environments, the predominant scavenging of the triplet excited state of chromophoric dissolved organic matter (3CDOM*) involves dissolved ground-state oxygen, diverting attention away from the scavenging mechanisms of 3CDOM* mediated through specific organic compounds. Previous studies demonstrated that model 3CDOM* exhibited quantum yields (i.e., 1-56%) in the formation of radical ions, resulting from the competition between physical and chemical quenching through a common exciplex intermediate. Physical quenching was rationalized through the reverse intersystem crossing of the exciplex, followed by back electron transfer, yielding ground-state reactants. Despite this, direct experimental evidence for exciplex involvement has been elusive, owing to detection challenges. Herein, employing density functional theory (DFT) and time-dependent DFT specifically for excited state surrogate CDOM and organic scavengers, we unveil, for the first time, the underlying mechanisms responsible for the quenching of Rose Bengal through oxidative and reductive scavengers. Our computational findings provide evidence for the involvement of exciplexes during the quenching process of the excited triplet state of Rose Bengal, highlighting the impact of electronic coupling between Rose Bengal and quenchers on the quantum yield for radical ion formation.

Photochemical activity of water-soluble organic compounds in motor vehicle exhaust particulate matter

Particulate matter from motor vehicle exhaust is a type of important atmospheric particulates, which can absorb sunlight affecting its photochemical behavior. However, the photochemical activity of water-soluble organic compounds (WSOC) in motor vehicle exhaust particulate matter has not been explored. Here, we applied WSOC in particulate matter from motor vehicle exhaust to investigate the photogenerating ability of its reactive oxygen species (ROS) and its effect based on model phenol photodegradation with the comparison between WSOC in diesel particulate matter and in gasoline particulate matter. The WSOC in diesel particulate matter indicates higher abililty to generate ROS. The main active substance produced by WSOC in the presence of light is 3WSOC*, the secondary substance is 1O2, and small amounts of ·OH and O2·- are also produced. Less active material was produced as WSOC photoaging time increases. Furthermore, the WSOC in diesel particulate matter is more sensitive to light exposure compared to WSOC in gasoline particulate matter. The effects of common atmospheric ionic components on model phenol photodegradation were also explored. Whether WSOC of diesel particulate matter or WSOC of gasoline particulate matter, ammonium nitrate, ammonium sulfate, and ferric chloride promote degradation of model phenol, and copper sulfate inhibited model phenol degradation. However, a different trend emerged with the addition of sodium chloride, which promoted the degradation of model phenol in WSOC of diesel particulate matter and inhibited the degradation in WSOC of gasoline particulate matter.

Closed-loop transfer enables artificial intelligence to yield chemical knowledge

Artificial intelligence-guided closed-loop experimentation has emerged as a promising method for optimization of objective functions1,2, but the substantial potential of this traditionally black-box approach to uncovering new chemical knowledge has remained largely untapped. Here we report the integration of closed-loop experiments with physics-based feature selection and supervised learning, denoted as closed-loop transfer (CLT), to yield chemical insights in parallel with optimization of objective functions. CLT was used to examine the factors dictating the photostability in solution of light-harvesting donor-acceptor molecules used in a variety of organic electronics applications, and showed fundamental insights including the importance of high-energy regions of the triplet state manifold. This was possible following automated modular synthesis and experimental characterization of only around 1.5% of the theoretical chemical space. This physics-informed model for photostability was strengthened using multiple experimental test sets and validated by tuning the triplet excited-state energy of the solvent to break out of the observed plateau in the closed-loop photostability optimization process. Further applications of CLT to additional materials systems support the generalizability of this strategy for augmenting closed-loop strategies. Broadly, these findings show that combining interpretable supervised learning models and physics-based features with closed-loop discovery processes can rapidly provide fundamental chemical insights.

Role of Direct and Sensitized Photolysis in the Photomineralization of Dissolved Organic Matter and Model Chromophores to Carbon Dioxide

This study addresses the fundamental processes that drive the photomineralization of dissolved organic matter (DOM) to carbon dioxide (CO2), deconvoluting the role of direct and sensitized photolysis. Here, a suite of DOM isolates and model compounds were exposed to simulated sunlight in the presence of various physical and chemical quenchers to assess the magnitude, rate, and extent of direct and sensitized photomineralization to CO2. Results suggest that CO2 formation occurs in a biphasic kinetic system, with fast production occurring within the first 3 h, followed by slower production thereafter. Notably, phenol model chromophores were the highest CO2 formers and, when conjugated with carboxylic functional groups, exhibited a high efficiency for CO2 formation relative to absorbed light. Simple polycarboxylated aromatic compounds included in this study were shown to be resistant to photomineralization. Quencher results suggest that direct photolysis and excited triplet state sensitization may be largely responsible for CO2 photoproduction in DOM, while singlet oxygen and hydroxyl radical sensitization may play a limited role. After 3 h of irradiation, the CO2 formation rate significantly decreased, and the role of sensitized reactions in CO2 formation increased. Together, the results from this study advance the understanding of the fundamental reactions driving DOM photomineralization to CO2, which is an important part of the global carbon cycle.

Effect of Dissolved Organic Matter on the Photodegradation of Decachlorobiphenyl (PCB-209) in Heterogeneous Systems: Experimental Analysis and Excited-State Theory Calculations

Dissolved organic matter (DOM) can affect the transformation of pollutants through photosensitization, but most current research focuses on hydrophilic pollutants, making it such that less attention is paid to hydrophobic pollutants. In this paper, the effect and action mechanism of coexisting DOM on the photodegradation of decachlorobiphenyl (PCB-209) on suspended particles collected from the Yellow River were systematically investigated in a heterogeneous system using DOM standards and model compounds. Through molecular probe experiments, mass spectrometry analysis and theoretical calculations, we found that the excited triplet state of DOM (3DOM*) could excite PCB-209 to undergo dechlorination reaction. Due to the different modes of electron transition, the presence of carbonyl groups decreased the energy of 3DOM*, whereas the electron-donating groups made the energy of 3DOM* higher. DOM containing phenolic hydroxyl groups led to a higher steady-state concentration of •OH, and DOM containing phenyl ketone structures had a stronger ability to produce •O2-. Compared with aqueous •OH, •O2- produced from hydrophobic microregions could react more readily with PCB-209. This study deepens the understanding of the role of different functional groups of DOM in the photosensitized transformation of hydrophobic compounds.

Critical review of fluorescence and absorbance measurements as surrogates for the molecular weight and aromaticity of dissolved organic matter

Dissolved organic matter (DOM) is ubiquitous in aquatic environments and challenging to characterize due to its heterogeneity. Optical measurements (i.e., absorbance and fluorescence spectroscopy) are popular characterization tools, because they are non-destructive, require small sample volumes, and are relatively inexpensive and more accessible compared to other techniques (e.g., high resolution mass spectrometry). To make inferences about DOM chemistry, optical surrogates have been derived from absorbance and fluorescence spectra to describe differences in spectral shape (e.g., E2:E3 ratio, spectral slope, fluorescence indices) or quantify carbon-normalized optical responses (e.g., specific absorbance (SUVA) or specific fluorescence intensity (SFI)). The most common interpretations relate these optical surrogates to DOM molecular weight or aromaticity. This critical review traces the genesis of each of these interpretations and, to the extent possible, discusses additional lines of evidence that have been developed since their inception using datasets comparing diverse DOM sources or strategic endmembers. This review draws several conclusions. More caution is needed to avoid presenting surrogates as specific to either molecular weight or aromaticity, as these physicochemical characteristics are often correlated or interdependent. Many surrogates are proposed using narrow contexts, such as fractionation of a limited number of samples or dependence on isolates. Further study is needed to determine if interpretations are generalizable to whole-waters. Lastly, there is a broad opportunity to identify why endmembers with low abundance of aromatic carbon (e.g., effluent organic matter, Antarctic lakes) often do not follow systematic trends with molecular weight or aromaticity as observed in endmembers from terrestrial environments with higher plant inputs.

Evaporation-Induced Transformations in Volatile Chemical Product-Derived Secondary Organic Aerosols: Browning Effects and Alterations in Oxidative Reactivity

Volatile chemical products (VCPs) are increasingly recognized as significant sources of volatile organic compounds (VOCs) in urban atmospheres, potentially serving as key precursors for secondary organic aerosol (SOA) formation. This study investigates the formation and physicochemical transformations of VCP-derived SOA, produced through ozonolysis of VOCs evaporated from a representative room deodorant air freshener, focusing on the effects of aerosol evaporation on its molecular composition, light absorption properties, and reactive oxygen species (ROS) generation. Following aerosol evaporation, solutes become concentrated, accelerating reactions within the aerosol matrix that lead to a 42% reduction in peroxide content and noticeable browning of the SOA. This process occurs most effectively at moderate relative humidity (∼40%), reaching a maximum solute concentration before aerosol solidification. Molecular characterization reveals that evaporating VCP-derived SOA produces highly conjugated nitrogen-containing products from interactions between existing or transformed carbonyl compounds and reduced nitrogen species, likely acting as chromophores responsible for the observed brownish coloration. Additionally, the reactivity of VCP-derived SOA was elucidated through heterogeneous oxidation of sulfur dioxide (SO2), which revealed enhanced photosensitized sulfate production upon drying. Direct measurements of ROS, including singlet oxygen (1O2), superoxide (O2•-), and hydroxyl radicals (•OH), showed higher abundances in dried versus undried SOA samples under light exposure. Our findings underscore that drying significantly alters the physicochemical properties of VCP-derived SOA, impacting their roles in atmospheric chemistry and radiative balance.

Development of an Elementary Reaction-Based Kinetic Model to Predict the Aqueous-Phase Fate of Organic Compounds Induced by Reactive Free Radicals

ConspectusAqueous-phase free radicals such as reactive oxygen, halogen, and nitrogen species play important roles in the fate of organic compounds in the aqueous-phase advanced water treatment processes and natural aquatic environments under sunlight irradiation. Predicting the fate of organic compounds in aqueous-phase advanced water treatment processes and natural aquatic environments necessitates understanding the kinetics and reaction mechanisms of initial reactions of free radicals with structurally diverse organic compounds and other reactions. Researchers developed conventional predictive models based on experimentally measured transformation products and determined reaction rate constants by fitting with the time-dependent concentration profiles of species due to difficulties in their measurements of unstable intermediates. However, the empirical treatment of lumped reaction mechanisms had a model prediction limitation with respect to the specific parent compound's fate. We use ab initio and density functional theory quantum chemical computations, numerical solutions of ordinary differential equations, and validation of the outcomes of the model with experiments. Sensitivity analysis of reaction rate constants and concentration profiles enables us to identify an important elementary reaction in formating the transformation product. Such predictive elementary reaction-based kinetics models can be used to screen organic compounds in water and predict their potentially toxic transformation products for a specific experimental investigation.Over the past decade, we determined linear free energy relationships (LFERs) that bridge the kinetic and thermochemical properties of reactive oxygen species such as hydroxyl radicals (HO•), peroxyl radicals (ROO•), and singlet oxygen (1O2); reactive halogen species such as chlorine radicals (Cl•) and bromine radicals (Br•); reactive nitrogen species (NO2•); and carbonate radicals (CO3•-). We used literature-reported experimental rate constants as kinetic information. We considered the theoretically calculated aqueous-phase free energy of activation or reaction to be a kinetic or a thermochemical property, and obtained via validated ab initio or density functional theory-based quantum chemical computations using explicit and implicit solvation models. We determined rate-determining reaction mechanisms involved in reactions by observing robust LFERs. The general accuracy of LFERs to predict aqueous-phase rate constants was within a difference of a factor of 2-5 from experimental values.We developed elementary reaction-based kinetic models and predicted the fate of acetone induced by HO• in an advanced water treatment process and methionine by photochemically produced reactive intermediates in sunlit fresh waters. We provided mechanistic insight into peroxyl radical reaction mechanisms and critical roles in the degradation of acetone and the formation of transformation products. We highlighted different roles of triplet excited states of two surrogate CDOMs, 1O2, and HO•, in methionine degradation. Predicted transformation products were compared to those obtained via benchtop experiments to validate our elementary reaction-based kinetic models. Predicting the reactivities of reactive halogen and nitrogen species implicates our understanding of the formation of potentially toxic halogen- and nitrogen-containing transformation products during water treatment processes and in natural aquatic environments.

Direct and indirect photodegradation in aquatic systems mitigates photosensitized toxicity in screening-level substance risk assessments of selected petrochemical structures

Photochemical processes are typically not incorporated in screening-level substance risk assessments due to the complexity of modeling sunlight co-exposures and resulting interactions on environmental fate and effects. However, for many substances, sunlight exerts a profound influence on environmental degradation rates and ecotoxicities. Recent modeling advances provide an improved technical basis for estimating the effect of sunlight in modulating both substance exposure and toxicity in the aquatic environment. Screening model simulations were performed for 25 petrochemical structures with varied uses and environmental fate properties. Model predictions were evaluated by comparing the ratios of predicted exposure concentrations with and without light to the corresponding ratios of toxicity thresholds under the same conditions. The relative ratios of exposure and hazard in light vs. dark were then used to evaluate how inclusion of light modulates substance risk analysis. Results indicated that inclusion of light reduced PECs by factors ranging from 1.1- to 63-fold as a result of photodegradation, while reducing PNECs by factors ranging from 1- to 49-fold due to photoenhanced toxicity caused by photosensitization. Consequently, the presence of light altered risk quotients by factors that ranged from 0.1- to 17-fold, since the predicted increase in substance hazard was mitigated by the reduction in exposure. For many structures, indirect photodegradation decreases environmental exposures independently of the direct photolysis pathway which is associated with enhanced phototoxicity. For most of the scenarios and chemicals in the present work, photosensitization appears to be mitigated by direct and indirect degradation from sunlight exposure.

Effects of Tryptophan and Tyrosine on the Transformation of Monophenols in Chromophoric Dissolved Organic Matter Solutions: Enhance the Forward Transformation and Reduce the Reverse Transformation

Tryptophan (Trp) and tyrosine (Tyr) are the primary precursors of protein-like components in dissolved organic matter. Phenolic compounds are ubiquitous in aquatic environments and are considered the main electron donor in chromophoric dissolved organic matter (CDOM). Our results showed that Trp and Tyr (50 μM) enhanced the transformation of six monophenols (20 μM) with varying numbers of -CH3 and -OCH3 substituent groups by a factor of 1.0-1.8. The enhancement factor increased with the ratio of Trp (Tyr) to monophenols. In four different CDOM solutions (5 mg C/L, pH 8.0), a maximum enhancement factor of 3.2-6.7 was observed at a Trp/monophenol concentration ratio of 50. Conversely, monophenols greatly inhibited the transformation of Trp or Tyr. The enhancement factor decreased as the initial pH increased from 3.0 to 10.0. Additionally, the enhancement factor was not directly proportional to the oxidation potential of monophenol. We propose that the promotion effects are generated through the direct oxidation of monophenols by Trp (Tyr) radicals as well as through the reaction between Trp (Tyr) radicals and the one-electron reductant of CDOM.

High-Resolution Mass Spectrometry Combined with Reactive Oxygen Species Reveals Differences in Photoreactivity of Dissolved Organic Matter from Microplastic Sources in Aqueous Environments

Microplastics (MPs)-derived dissolved organic matter (MPs-DOM) is becoming a non-negligible source of DOM pools in aquatic systems, but there is limited understanding about the photoreactivity of different MPs-DOM. Herein, MPs-DOM from polystyrene (PS), polyethylene terephthalate (PET), poly(butylene adipate-co-terephthalate) (PBAT), PE, and polypropylene (PP), representing aromatic, biodegradable, and aliphatic plastics, were prepared to examine their photoreactivity. Spectral and high-resolution mass spectrometry analyses revealed that PS/PET/PBAT-DOM contained more unsaturated aromatic components, whereas PE/PP-DOM was richer in saturated aliphatic components. Photodegradation experiments observed that unsaturated aromatic molecules were prone to be degraded compared to saturated aliphatic molecules, leading to a higher degradation of PS/PET/PBAT-DOM than PE/PP-DOM. PS/PET/PBAT-DOM was mainly degraded by hydroxyl (•OH) via attacking unsaturated aromatic structures, whereas PE/PP-DOM by singlet oxygen (1O2) through oxidizing aliphatic side chains. The [•OH]ss was 1.21-1.60 × 10-4 M in PS/PET/PBAT-DOM and 0.97-1.14 × 10-4 M in PE/PP-DOM, while the [1O2]ss was 0.90-1.35 × 10-12 and 0.33-0.44 × 10-12 M, respectively. This contributes to the stronger photoreactivity of PS/PET/PBAT-DOM with a higher unsaturated aromatic degree than PE/PP-DOM. The photodegradation of MPs-DOM reflected a decreasing tendency from aromatic-unsaturated molecules to aliphatic-saturated molecules. Special attention should be paid to the photoreactivity and environmental impacts associated with MPs-DOM containing highly unsaturated aromatic compounds.

Pollutant Photodegradation Affected by Evaporative Water Concentration in a Climate Change Scenario

Evaporative water concentration takes place in arid or semi-arid environments when stationary water bodies, such as lakes or ponds, prevalently lose water by evaporation, which prevails over outflow or seepage into aquifers. Absence or near-absence of precipitation and elevated temperatures are important prerequisites for the process, which has the potential to deeply affect the photochemical attenuation of pollutants, including contaminants of emerging concern (CECs). Here we show that water evaporation would enhance the phototransformation of many CECs, especially those undergoing degradation mainly through direct photolysis and triplet-sensitized reactions. In contrast, processes induced by hydroxyl and carbonate radicals would be inhibited. Our model results suggest that the photochemical impact of water evaporation might increase in the future in several regions of the world, with no continent likely being unaffected, due to the effects of local precipitation decrease combined with an increase in temperature that facilitates evaporation.

Generation and Application of Aryl Radicals Under Photoinduced Conditions

Photoinduced aryl radical generation is a powerful strategy in organic synthesis that facilitates the formation of diverse carbon-carbon and carbon-heteroatom bonds. The synthetic applications of photoinduced aryl radical formation in the synthesis of complex organic compounds, including natural products, physiologically significant molecules, and functional materials, have received immense attention. An overview of current developments in photoinduced aryl radical production methods and their uses in organic synthesis is given in this article. A generalized idea of how to choose the reagents and approach for the generation of aryl radicals is described, along with photoinduced techniques and associated mechanistic insights. Overall, this article offers a critical assessment of the mechanistic results as well as the selection of reaction parameters for specific reagents in the context of radical cascades, cross-coupling reactions, aryl radical functionalization, and selective C-H functionalization of aryl substrates.

Dissolved organic matter isolates obtained by solid phase extraction exhibit higher absorption and lower photo-reactivity: Effect of components

Notable differences in photo-physical and chemical properties were found between bulk water and solid phase extraction (SPE) isolates for dissolved organic matter (DOM). The moieties extracted using modified styrene divinylbenzene cartridges, which predominantly consist of conjugated aromatic molecules like humic acids, contribute mainly to light absorption but exhibit lower quantum yields of fluorescence and photo-produced reactive intermediates (PPRIs). Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) revealed lignin as the moieties displaying most significant variance in abundance. In Van Krevelen-Spearman plot, we observed molecules positively or negatively correlated with DOM's optical and photochemical properties (including SUVA254, steady-state concentrations of ·OH, 1O2 quantum yield, etc.) were confined to specific regions, which can be delineated using a threshold modified aromaticity index (AImod) of 0.3. Based on the relationships between optical properties and PPRI production, it is suggested that the energy gap between ground state and excited singlet state (△ES1→S0), governing the inner conversion rate, serves as a determinant for apparent quantum yield of PPRIs in DOM, with intra-molecular charge transfer (CT) interactions potentially playing a pivotal role. Regarding DOM's photoreactivity with pollutants, this study has revealed, for the first time, that protein/amino sugars/amino acids could act as antioxidant groups in addition to phenols on the photolysis of sulfadiazine. These findings provide valuable insights into DOM photochemistry and are expected to stimulate further research in this area.

Inferring the Molecular Basis for Dissolved Organic Matter Photochemical and Optical Properties

Despite the widespread use of photochemical and optical properties to characterize dissolved organic matter (DOM), a significant gap persists in our understanding of the relationship among these properties. This study infers the molecular basis for the optical and photochemical properties of DOM using a comprehensive framework and known structural moieties within DOM. Utilizing Suwannee River Fulvic Acid (SRFA) as a model DOM, carboxylated aromatics, phenols, and quinones were identified as dominant contributors to the absorbance spectra, and phenols, quinones, aldehydes, and ketones were identified as major contributors to radiative energy pathways. It was estimated that chromophores constitute ∼63% w/w of dissolved organic carbon in SRFA and ∼47% w/w of overall SRFA. Notably, estimations indicate the pool of fluorescent compounds and photosensitizing compounds in SRFA are likely distinct from each other at wavelengths below 400 nm. This perspective offers a practical tool to aid in the identification of probable chemical groups when interpreting optical and photochemical data and challenges the current "black box" thinking. Instead, DOM photochemical and optical properties can be closely estimated by assuming the DOM is composed of a mixture of individual compounds.

Dissolved Organic Matter-Mediated Photosensitized Activation of Monochloramine for Micropollutant Abatement in Wastewater Effluent

Utilizing solar light and water matrix components in situ to reduce the chemical and energy demands would make treatment technologies more sustainable for micropollutant abatement in wastewater effluents. We herein propose a new strategy for micropollutant abatement through dissolved organic matter (DOM)-mediated photosensitized activation of monochloramine (NH2Cl). Exposing the chlorinated wastewater effluent with residual NH2Cl to solar irradiation (solar/DOM/NH2Cl process) degrades six structurally diverse micropollutants at rate constants 1.26-34.2 times of those by the solar photolysis of the dechlorinated effluent (solar/DOM process). Notably, among the six micropollutants, the degradation rate constants of estradiol, acetaminophen, bisphenol A, and atenolol by the solar/DOM/NH2Cl process are 1.13-4.32 times the summation of those by the solar/DOM and solar/NH2Cl processes. The synergism in micropollutant degradation is attributed to the generation of reactive nitrogen species (RNS) and hydroxyl radicals (HO·) from the photosensitized activation of NH2Cl. Triplet state-excited DOM (3DOM*) dominates the activation of NH2Cl, leading to the generation of RNS, while HO· is produced from the interactions between RNS and other photochemically produced reactive intermediates (e.g., O2·- and DOM·+/·-). The findings advance the knowledge of DOM-mediated photosensitization and offer a sustainable method for micropollutant abatement in wastewater effluents containing residual NH2Cl.

Wavelength dependency and photosensitizer effects in UV-LED photodegradation of iohexol

Iodinated X-ray contrast media (ICM) are ubiquitously present in water sources and challenging to eliminate using conventional processes, posing a significant risk to aquatic ecosystems. Ultraviolet light-emitting diodes (UV-LED) emerge as a promising technology for transforming micropollutants in water, boasting advantages such as diverse wavelengths, elimination of chemical additives, and no induction of microorganisms' resistance to disinfectants. The research reveals that iohexol (IOX) degradation escalates as UV wavelength decreases, attributed to enhanced photon utilization efficiency. Pseudo-first-order rate constants (kobs) were determined as 3.70, 2.60, 1.31 and 0.65 cm2 J-1 at UV-LED wavelengths of 255, 265, 275 and 285 nm, respectively. The optical properties of dissolved organic matter (DOM) and anions undeniably influence the UV-LED photolysis process through photon competition and the generation of reactive substances. The influence of Cl- on IOX degradation was insignificant at UV-LED 255, but it promoted IOX degradation at 265, 275 and 285 nm. IOX degradation was accelerated by ClO2-, NO3-and HA due to the formation of various reactive species. In the presence of NO3-, the kobs of IOX followed the order: 265 > 255 > 275 > 285 nm. Photosensitizers altered the spectral dependence of IOX, and the intermediate photoactivity products were detected using electron spin resonance. The transformation pathways of IOX were determined through density functional theory calculations and experiments. Disinfection by-products (DBPs) yields of IOX during UV-LED irradiation decreased as the wavelength increased: 255 > 265 > 275 > 285 nm. The cytotoxicity index value decreased as the UV-LED wavelength increased from 255 to 285 nm. These findings are crucial for selecting the most efficient wavelength for UV-LED degradation of ICM and will benefit future water purification design.

Characterizing the Impact of Cyanobacterial Blooms on the Photoreactivity of Surface Waters from New York Lakes: A Combined Statewide Survey and Laboratory Investigation

Cyanobacterial blooms introduce autochthonous dissolved organic matter (DOM) into aquatic environments, but their impact on surface water photoreactivity has not been investigated through collaborative field sampling with comparative laboratory assessments. In this work, we quantified the apparent quantum yields (Φapp,RI) of reactive intermediates (RIs), including excited triplet states of dissolved organic matter (3DOM*), singlet oxygen (1O2), and hydroxyl radicals (•OH), for whole water samples collected by citizen volunteers from more than 100 New York lakes. Multiple comparisons tests and orthogonal partial least-squares analysis identified the level of cyanobacterial chlorophyll a as a key factor in explaining the enhanced photoreactivity of whole water samples sourced from bloom-impacted lakes. Laboratory recultivation of bloom samples in bloom-free lake water demonstrated that apparent increases in Φapp,RI during cyanobacterial growth were likely driven by the production of photoreactive moieties through the heterotrophic transformation of freshly produced labile bloom exudates. Cyanobacterial proliferation also altered the energy distribution of 3DOM* and contributed to the accelerated transformation of protriptyline, a model organic micropollutant susceptible to photosensitized reactions, under simulated sunlight conditions. Overall, our study provides insights into the relationship between the photoreactivity of surface waters and the limnological characteristics and trophic state of lakes and highlights the relevance of cyanobacterial abundance in predicting the photoreactivity of bloom-impacted surface waters.

Effects of dissolved organic matter and halogen ions on phototransformation of pharmaceuticals and personal care products in aquatic environments

Photochemical reactions contribute to the attenuation and transformation of pharmaceuticals and personal care products (PPCPs) in surface natural waters. Nevertheless, effects of DOM and halogen ions on phototransformation of PPCPs remain elusive. This work selected disparate PPCPs as target pollutants to investigate their aquatic phototransformation processes. Results show that PPCPs containing multiple electron-donating groups (-OH, -NH2, -OR, etc.) are more reactive with photochemically produced reactive intermediates (PPRIs) such as triplet DOM (3DOM*), singlet oxygen (1O2), and reactive halogen species (RHSs), relative to PPCPs containing electron-withdrawing groups (-NOR, -COOR, -OCR, etc.). The generation of RHSs as a result of the coexistance of DOM and halide ions changed the contribution of PPRIs to the photochemical conversion of PPCPs during their migration from fresh water to seawater. For PPCPs (AMP, SMZ, PN, NOR, CIP, etc) with highly reactive groups toward RHSs, the generation of RHSs facilitated their photolysis in halide ion-rich waters, where Cl- plays a critical role in the photochemical transformation of PPCPs. Density functional theory (DFT) calculations showed that single electron transfer and H-abstraction are main reaction pathways of RHSs with the PPCPs. These results demonstate the irreplaceable roles of PPRIs and revealing the underlying reaction mechanisms during the phototransformation of PPCPs, which contributes to a better understanding of the environmental behaviors of PPCPs in complex aquatic environments.

Photochemical processes transform dissolved organic matter differently depending on its initial composition

Dissolved organic matter (DOM) is one of the most important fluxes in the global carbon cycle but its response to light exposure remains unclear at a molecular-level. The chemical response of DOM to light should vary with its molecular composition and environmental conditions while some basic hypotheses are still unclear, such as the balance between photobleaching and photo-humification and the question of oxidative properties. Here we exposed aquatic DOM from diverse freshwaters impacted by different levels of anthropogenic activity and algal exudates to environmentally-realistic light conditions. We found that photobleaching occurred in DOM with relatively high initial humic content producing low H/C molecules, whereas DOM with low initial humic content was humified. DOM pools with relatively high initial saturation and low aromaticity were prone to transform towards more unsaturated molecular formulae and high H/C molecules with a distinct decrease of bioavailability. Photo-transformation was mainly influenced by reactive intermediates, with reactive oxygen species (ROS) playing a dominant role in humification when the initial humus content of DOM was high. In contrast, for algal DOM with high protein content, it was likely that the autoxidation of excited state DOM was more important than indirect oxidation involving ROS. Our results reveal how photo-transformation patterns depend on the initial composition of DOM and provide new insights into the role of photochemical processes in biogeochemical cycling of DOM.

Attenuation photochemical potential of Pontal of Paranapanema river waters (Brazil) from agrochemicals: geographical and temporal assessment

Knowledge of the environmental photochemical fate of pesticides is essential to assess their potential impacts. However, there are few studies in the literature focused on the photochemical attenuation of micropollutants in Brazilian rivers. In this context, this study characterized the surface waters of the Pontal of Paranapanema region (region which concentrates more than 80% of Brazilian sugarcane cultivations), in order to determine its photochemical attenuation potential against micropollutants in different seasons. Thus, the steady-state concentrations of the photochemically produced reactive intermediates (PPRIs) (hydroxyl radical, HO•; singlet oxygen, 1O2, and triplet-excited state chromophoric dissolved organic matter, 3CDOM*), formed in the rivers, were simulated by using the APEX model (Aquatic Photochemistry of Environmentally-occurring Xenobiotics), considering the sunlight irradiance, water chemistry, and depth. Based on our simulations, these concentrations vary between 0.35 × 10-15 and 4.52 × 10-14 mol L-1 for HO•, 1.3 × 10-15 and 1.2 × 10--14 mol L-1 for 3CDOM*, and 2.5 × 10-15 and 2.5 × 10-14 mol L-1 for 1O2. Finally, mathematical simulations were used for predicting persistence of pesticides atrazine (ATZ) and diuron (DIR) in Pontal of Paranapanema surface waters and the half-life times (t1/2) of the pollutants ranged from a few hours to one week.

Photoproduction of reactive intermediates from dissolved organic matter in coastal seawater around an urban metropolis in South China: Characterization and predictive modeling

Chromophoric dissolved organic matter (CDOM) is an important photochemical precursor to reactive intermediates (RIs) (e.g., excited triplet states of chromophoric dissolved organic matter (3CDOM⁎), hydroxyl radicals (·OH), and singlet oxygen (1O2)) in aquatic systems to drive the photodegradation of contaminants. There have been limited studies on the photoproduction of RIs in coastal seawater CDOM in Asia, which impedes our ability to model the lifetimes and fates of contaminants in these coastal seawater systems. Hong Kong is an urban metropolis in South China, whose coastal seawater is susceptible to anthropogenic activities from the surrounding areas and the nearby Pearl River. We investigated the photoproduction of RIs in seawater around Hong Kong during the wet vs. dry season. Higher intensities of fluorescent components, dissolved organic carbon concentration ([DOC]), apparent quantum yields of RIs (ΦRIs), and steady-state concentrations of photogenerated RIs ([RIs]ss) were observed for samples collected in the areas closest to the Pearl River during the wet season. Lower humification degrees and ΦRIs but higher intensities of fluorescent components and [RIs]ss were generally observed for the wet season samples compared to the dry season samples. Statistical analysis revealed strong significant correlations (Spearman |r| > 0.6, p < 0.05) between ΦRIs and the absorbance properties (including the absorbance ratio E2:E3, spectral slope coefficients S350-400, and spectral slope ratio SR) of CDOM, and between [RIs]ss and the quantity-reflected properties (including the fluorescence intensity of humic-like components) of CDOM. Our modeling analyses combining orthogonal partial least squares and stepwise multiple linear regression showed excellent prediction strengths for [1O2]ss and [3CDOM⁎]ss (R2adj > 0.7) when [DOC] and the chemical and optical properties of CDOM were used as predictor variables. These modeling results demonstrate the feasibility of predicting the concentrations and quantum yields of RIs in seawater around Hong Kong, and potentially other coastal cities in South China, from easily measurable chemical and optical properties.

Reassessing the Quantum Yield and Reactivity of Triplet-State Dissolved Organic Matter via Global Kinetic Modeling

Measuring the quantum yield and reactivity of triplet-state dissolved organic matter (3DOM*) is essential for assessing the impact of DOM on aquatic photochemical processes. However, current 3DOM* quantification methods require multiple fitting steps and rely on steady-state approximations under stringent application criteria, which may introduce certain inaccuracies in the estimation of DOM photoreactivity parameters. Here, we developed a global kinetic model to simulate the reaction kinetics of the hv/DOM system using four DOM types and 2,4,6-trimethylphenol as the probe for 3DOM*. Analyses of residuals and the root-mean-square error validated the exceptional precision of the new model compared to conventional methods. 3DOM* in the global kinetic model consistently displayed a lower quantum yield and higher reactivity than those in local regression models, indicating that the generation and reactivity of 3DOM* have often been overestimated and underestimated, respectively. The global kinetic model derives parameters by simultaneously fitting probe degradation kinetics under different conditions and considers the temporally increasing concentrations of the involved reactive species. It minimizes error propagation and offers insights into the interactions of different species, thereby providing advantages in accuracy, robustness, and interpretability. This study significantly advances the understanding of 3DOM* behavior and provides a valuable kinetic model for aquatic photochemistry research.

Photo-production of excited triplet-state of dissolved organic matters in inland freshwater and coastal seawater

The excited triplet-state of dissolved organic matter (3DOM*) is a major reactive intermediate in sunlit waters. Its quantum yield is important in understanding the fate of organic micropollutants. The degradation efficiency of its chemical probe, 2,4,6-trimeythlphenol (fTMP), is generally used as a proxy of the quantum yield. However, fTMP has been described and modelled only for freshwater systems. Therefore, this study quantified fTMP in inland freshwater and coastal seawater sampled in Japan by conducting steady-state photochemical experiments. Optical properties of water were then used to model fTMP. Results indicated that the inland freshwater DOM originated mainly from terrestrial sources, while the coastal seawater DOM were microbial-dominated. On average, inland freshwater exhibited lower fTMP (61.2 M-1) than coastal seawater (79.7 M-1) and the coastal seawater exhibited significant variations in the proportion of high-energy 3DOM* (> 250 kJ/mol). In addition, E2:E3 (ratio of absorbance at 254 to 365 nm) was positively correlated with fTMP of inland freshwater, coastal seawater, and the overall dataset. Catchment conditions such as forest coverage also influenced the production of 3DOM* and high-energy 3DOM* in inland freshwater. Furthermore, the developed models estimated fTMP based on the optical properties of both freshwater and seawater, providing valuable insights about 3DOM* photochemistry in the aquatic environment.

Solar light photodegradation of nicotine in the presence of aged polystyrene microplastics

Limited information exists on the potential of aged microplastics to induce photodegradation of organic pollutants under sunlight irradiation. In this work, nicotine (NIC), a widespread emerging contaminant, was used as a model organic substrate to investigate this innovative degradation process. Polystyrene (PS) pellets were artificially aged and became rich in oxygenated moieties with their carbonyl index reaching 0.43 ± 0.04 after 4 d of aging. The degradation of NIC photosensitized by aged PS at different pH values was monitored for 6 h under simulated sunlight irradiation (650 W/m2). The maximum degradation rate was observed at pH = 11 (75 % NIC removal from a 10 mg L-1 solution containing 50 g L-1 aged PS pellets), suggesting that the unprotonated NIC is the most photoreactive form. Increasing the PS load from 50 to 200 g L-1 accelerated NIC degradation. The addition of 2.5 mg L-1 humic acids had a slight enhancement role (82 % NIC degradation), which confirms their effectiveness as photosensitizers. NIC photosensitization by aged PS was also studied in the presence of t-butanol (55 % NIC removal in solutions containing 100 mg L-1 t-butanol) and in anoxic conditions (NIC solution purged with N2; 95 % NIC removal), to gain insight into the respective roles of the potentially formed •OH and 1O2. The main photo-produced reactive species involved in NIC degradation likely were the triplet states of the PS beads (3PS*). Differently from most advanced oxidation processes, NIC's photodegradation by aged PS was not affected by increasing amount of chloride and we observed negligible differences between NIC degradation in ultra-pure water and seawater. The effectiveness of irradiated PS towards NIC photodegradation was also investigated in tap water and secondary wastewater. Overall, the possibility to decontaminate polluted water with waste-derived materials is interesting in the framework of circular economy.

Development of a Five-Chemical-Probe Method to Determine Multiple Radicals Simultaneously in Hydroxyl and Sulfate Radical-Mediated Advanced Oxidation Processes

Advanced oxidation processes (AOPs), such as hydroxyl radical (HO•)- and sulfate radical (SO4•-)-mediated oxidation, are attractive technologies used in water and wastewater treatments. To evaluate the treatment efficiencies of AOPs, monitoring the primary radicals (HO• and SO4•-) as well as the secondary radicals generated from the reaction of HO•/SO4•- with water matrices is necessary. Therefore, we developed a novel chemical probe method to examine five key radicals simultaneously, including HO•, SO4•-, Cl•, Cl2•-, and CO3•-. Five probes, including nitrobenzene, para-chlorobenzoic acid, benzoic acid, 2,4,6-trimethylbenzoic acid, and 2,4,6-trimethylphenol, were selected in this study. Their bimolecular reaction rate constants with diverse radicals were first calibrated under the same conditions to minimize systematic errors. Three typical AOPs (UV/H2O2, UV/S2O82-, and UV/HSO5-) were tested to obtain the radical steady-state concentrations. The effects of dissolved organic matter, Br-, and the probe concentration were inspected. Our results suggest that the five-probe method can accurately measure radicals in the HO•- and SO4•--mediated AOPs when the concentration of Br- and DOM are less than 4.0 μM and 15 mgC L-1, respectively. Overall, the five-probe method is a practical and easily accessible method to determine multiple radicals simultaneously.

Influence of Fuel Properties on the Light Absorption of Fresh and Laboratory-Aged Atmospheric Brown Carbon Produced from Realistic Combustion of Boreal Peat and Spruce Foliage

Climate change has exacerbated fire activity in the boreal region. Consequently, smoldering boreal peatland fires are an increasingly important source of light-absorbing atmospheric organic carbon ("brown carbon"; BrC). To date, however, BrC from this source remains largely unstudied, which limits our ability to predict its climate impact. Here, we use size-exclusion chromatography coupled with diode array UV-vis detection to examine the molecular-size-dependent light absorption properties of fresh and photoaged aqueous BrC extracts collected during laboratory combustion of boreal peat and live spruce foliage. The atmospheric stability of BrC extracts varies with chromophore molecular size and fuel type: in particular, the high-molecular-weight fractions of both peat- and spruce-BrC are more resistant to photobleaching than their corresponding low-molecular-weight fractions, and total light absorption by peat-BrC persists over longer illumination timescales than that of spruce-BrC. Importantly, the BrC molecular size distribution itself varies with fuel properties (e.g., moisture content) and to an even greater extent with fuel type. Overall, our findings suggest that the accurate estimation of BrC radiative forcing, and the overall climate impact of wildfires, will require atmospheric models to consider the impact of regional diversity in vegetation/fuel types.

Significantly Accelerated Photosensitized Formation of Atmospheric Sulfate at the Air-Water Interface of Microdroplets

The multiphase oxidation of sulfur dioxide (SO2) to form sulfate is a complex and important process in the atmosphere. While the conventional photosensitized reaction mainly explored in the bulk medium is reported to be one of the drivers to trigger atmospheric sulfate production, how this scheme functionalizes at the air-water interface (AWI) of aerosol remains an open question. Herein, employing an advanced size-controllable microdroplet-printing device, surface-enhanced Raman scattering (SERS) analysis, nanosecond transient adsorption spectrometer, and molecular level theoretical calculations, we revealed the previously overlooked interfacial role in photosensitized oxidation of SO2 in humic-like substance (HULIS) aerosol, where a 3-4 orders of magnitude increase in sulfate formation rate was speculated in cloud and aerosol relevant-sized particles relative to the conventional bulk-phase medium. The rapid formation of a battery of reactive oxygen species (ROS) comes from the accelerated electron transfer process at the AWI, where the excited triplet state of HULIS (3HULIS*) of the incomplete solvent cage can readily capture electrons from HSO3- in a way that is more efficient than that in the bulk medium fully blocked by water molecules. This phenomenon could be explained by the significantly reduced desolvation energy barrier required for reagents residing in the AWI region with an open solvent shell.

Mechanistic Aspects of Photodegradation of Deoxynucleosides Induced by Triplet State of Effluent Organic Matter

Excited triplet states of wastewater effluent organic matter (3EfOM*) are known as important photo-oxidants in the degradation of extracellular antibiotic resistance genes (eArGs) in sunlit waters. In this work, we further found that 3EfOM* showed highly selective reactivity toward 2'-deoxyguanosine (dG) sites within eArGs in irradiated EfOM solutions at pH 7.0, while it showed no photosensitizing capacity toward 2'-deoxyadenosine, 2'-deoxythymidine, and 2'-deoxycytidine (the basic structures of eArGs). The 3EfOM* contributed to the photooxidation of dG primarily via one-electron transfer mechanism, with second-order reaction rate constants of (1.58-1.74) × 108 M-1 s-1, forming the oxidation intermediates of dG (dG(-H)•). The formed dG(-H)• could play a significant role in hole hopping and damage throughout eArGs. Using the four deoxynucleosides as probes, the upper limit for the reduction potential of 3EfOM* is estimated to be between 1.47 and 1.94 VNHE. Compared to EfOM, the role of the triplet state of terrestrially natural organic matter (3NOM*) in dG photooxidation was minor (∼15%) mainly due to the rapid reverse reactions of dG(-H)• by the antioxidant moieties of NOM. This study advances our understanding of the difference in the photosensitizing capacity and electron donating capacity between NOM and EfOM and the photodegradation mechanism of eArGs induced by 3EfOM*.

Self-motivated photoaging of microplastics by biochar-dissolved organic matter under different pyrolysis temperatures

Dissolved organic matter (DOM) released from biochar (BDOM) can interact with microplastics (MPs) in the environment, inevitably affecting their environmental behaviour. Information regarding the influence of BDOM on MPs during photoaging and associated variations in the MP aging mechanism remains unclear. This study evaluated the effect of BDOM on the aging of polystyrene (PS) MPs. The results showed that among three pyrolysis temperatures, low-temperature BDOM significantly enhanced the photoaging process of PS MPs, with the smallest average particle size and highest carbonyl index value after 15 days of aging under light conditions. The DOM level decreased after 5 days, increased after 5-10 days, and stabilised after 15 d. BDOM accelerates PS MPs aging, leading to more DOM released from PS, which can be transformed into 1O2 via triplet-excited state (3DOM⁎ and 3PS⁎) to further enhance PS MPs aging, resulting in the realisation of the self-accelerated aging process of PS MPs. 1O2 plays a crucial role in the self-motivated accelerated aging process of PS MPs. These findings provide new insights into the effects of the DOM structure and composition on reactive oxygen species generation during MPs aging.

Enhanced Cr(VI) stabilization by terrestrial-derived soil protein: Photoelectrochemical properties and reduction mechanisms

Glomalin-related soil protein (GRSP) is a stable iron-organic carbon mixture that can enhance heavy metal sequestration in soils. However, the roles of GRSP in the transformation and fate of Cr(VI) have been rarely reported. Herein, we investigated the electrochemical and photocatalytic properties of GRSP and its mechanisms in Cr(VI) adsorption and reduction. Results showed that GRSP had a stronger ability for Cr(VI) adsorption and reduction than other biomaterials, with the highest adsorption amount of up to 0.126 mmol/g. The removal efficiency of Cr(VI) by GRSP was enhanced (4-7%) by ultraviolet irradiation due to the hydrated electrons produced by GRSP. Fe(II) ions, persistent free radicals, and oxygen-containing functional groups on the GRSP surface as electron donors participated in the reduction of Cr(VI) under dark condition. Moreover, Cr(III) was mainly adsorbed on the -COOH groups of GRSP via electrostatic interactions. Based on 2D correlation spectroscopy, the preferential adsorption occurred on the GRSP surface for Cr(VI) in the sequential order of CO → COO- → O-H → C-O. This work provides new insights into the Cr(VI) adsorption and reduction mechanism by GRSP. Overall, GRSP can serve as a natural iron-organic carbon for the photo-reduction of Cr(VI) pollution in environments.

Mineral-mediated stability of organic carbon in soil and relevant interaction mechanisms

Soil, the largest terrestrial carbon reservoir, is central to climate change and relevant feedback to environmental health. Minerals are the essential components that contribute to over 60% of soil carbon storage. However, how the interactions between minerals and organic carbon shape the carbon transformation and stability remains poorly understood. Herein, we critically review the primary interactions between organic carbon and soil minerals and the relevant mechanisms, including sorption, redox reaction, co-precipitation, dissolution, polymerization, and catalytic reaction. These interactions, highly complex with the combination of multiple processes, greatly affect the stability of organic carbon through the following processes: (1) formation or deconstruction of the mineral-organic carbon association; (2) oxidative transformation of the organic carbon with minerals; (3) catalytic polymerization of organic carbon with minerals; and (4) varying association stability of organic carbon according to the mineral transformation. Several pieces of evidence related to the carbon turnover and stability during the interaction with soil minerals in the real eco-environment are then demonstrated. We also highlight the current research gaps and outline research priorities, which may map future directions for a deeper mechanisms-based understanding of the soil carbon storage capacity considering its interactions with minerals.

Modeling Novel Aqueous Particle and Cloud Chemistry Processes of Biomass Burning Phenols and Their Potential to Form Secondary Organic Aerosols

Phenols emitted from biomass burning contribute significantly to secondary organic aerosol (SOA) formation through the partitioning of semivolatile products formed from gas-phase chemistry and multiphase chemistry in aerosol liquid water and clouds. The aqueous-phase SOA (aqSOA) formed via hydroxyl radical (•OH), singlet molecular oxygen (1O2*), and triplet excited states of organic compounds (3C*), which oxidize dissolved phenols in the aqueous phase, might play a significant role in the evolution of organic aerosol (OA). However, a quantitative and predictive understanding of aqSOA has been challenging. Here, we develop a stand-alone box model to investigate the formation of SOA from gas-phase •OH chemistry and aqSOA formed by the dissolution of phenols followed by their aqueous-phase reactions with •OH, 1O2*, and 3C* in cloud droplets and aerosol liquid water. We investigate four phenolic compounds, i.e., phenol, guaiacol, syringol, and guaiacyl acetone (GA), which represent some of the key potential sources of aqSOA from biomass burning in clouds. For the same initial precursor organic gas that dissolves in aerosol/cloud liquid water and subsequently reacts with aqueous phase oxidants, we predict that the aqSOA formation potential (defined as aqSOA formed per unit dissolved organic gas concentration) of these phenols is higher than that of isoprene-epoxydiol (IEPOX), a well-known aqSOA precursor. Cloud droplets can dissolve a broader range of soluble phenols compared to aqueous aerosols, since the liquid water contents of aerosols are orders of magnitude smaller than cloud droplets. Our simulations suggest that highly soluble and reactive multifunctional phenols like GA would predominantly undergo cloud chemistry within cloud layers, while gas-phase chemistry is likely to be more important for less soluble phenols. But in the absence of clouds, the condensation of low-volatility products from gas-phase oxidation followed by their reversible partitioning to organic aerosols dominates SOA formation, while the SOA formed through aqueous aerosol chemistry increases with relative humidity (RH), approaching 40% of the sum of gas and aqueous aerosol chemistry at 95% RH for GA. Our model developments of biomass-burning phenols and their aqueous chemistry can be readily implemented in regional and global atmospheric chemistry models to investigate the aqueous aerosol and cloud chemistry of biomass-burning organic gases in the atmosphere.

Unveiling the inhibition of chlortetracycline photodegradation and the increase of toxicity when coexisting with silver nanoparticles

Silver nanoparticles (AgNPs) and antibiotics inevitably co-exist in water environment. Nonetheless, little is known regarding the interactions between AgNPs and antibiotics or the effects of AgNPs on environmental behavior of antibiotics, particularly on sunlight-driven transformation. In the present work, we found that AgNPs obviously inhibit the photochemical decay of chlortetracycline (CTC), and CTC boosts the dissolution of AgNPs. With the help of electron paramagnetic resonance (EPR) and quenching experiment, we ascertained that these results originated from the competition between AgNPs against CTC for capturing 1O2 generated from CTC photosensitization. 1O2 reacting with CTC contributed mostly to CTC photodegradation, while 1O2 as well reacting with AgNPs leads to release of Ag+. When compared to reaction of 1O2 with CTC, 1O2 is prone to react with AgNPs, based on lower Gibbs free energy of AgNPs reacting with 1O2. Therefore, upon CTC co-existing with AgNPs, the release of Ag+ was accelerated and the photodegradation of CTC was inhibited obviously. Furthermore, the accelerated release of Ag+ significantly increased their toxicity toward E. coli cells under simulate sunlight irradiation. Overall, the findings demonstrate how AgNPs interact with CTC and how these interactions affect the environmental behaviors of CTC or AgNPs, allowing more accurate assessments of the risk to ecosystems posed by AgNPs coexisting with antibiotics.

Field Quantification of Hydroxyl Radicals by Flow-Injection Chemiluminescence Analysis with a Portable Device

Hydroxyl radical (•OH) is a powerful oxidant abundantly found in nature and plays a central role in numerous environmental processes. On-site detection of •OH is highly desirable for real-time assessments of •OH-centered processes and yet is restrained by a lack of an analysis system suitable for field applications. Here, we report the development of a flow-injection chemiluminescence analysis (FIA-CL) system for the continuous field detection of •OH. The system is based on the reaction of •OH with phthalhydrazide to generate 5-hydroxy-2,3-dihydro-1,4-phthalazinedione, which emits chemiluminescence (CL) when oxidatively activated by H2O2 and Cu3+. The FIA-CL system was successfully validated using the Fenton reaction as a standard •OH source. Unlike traditional absorbance- or fluorescence-based methods, CL detection could minimize interference from an environmental medium (e.g., organic matter), therefore attaining highly sensitive •OH detection (limits of detection and quantification = 0.035 and 0.12 nM, respectively). The broad applications of FIA-CL were illustrated for on-site 24 h detection of •OH produced from photochemical processes in lake water and air, where the temporal variations on •OH productions (1.0-12.2 nM in water and 1.5-37.1 × 107 cm-3 in air) agreed well with sunlight photon flux. Further, the FIA-CL system enabled field 24 h field analysis of •OH productions from the oxidation of reduced substances triggered by tidal fluctuations in coastal soils. The superior analytical capability of the FIA-CL system opens new opportunities for monitoring •OH dynamics under field conditions.

Insights into the Enhanced Photogeneration of Hydroxyl Radicals from Chlorinated Dissolved Organic Matter

Free available chlorine has been and is being applied in global water treatment and readily reacts with dissolved organic matter (DOM) in aquatic environments, leading to the formation of chlorinated products. Chlorination enhances the photoreactivity of DOM, but the influence of chlorinated compounds on the photogeneration of hydroxyl radicals (•OH) has remained unexplored. In this study, a range of chlorinated carboxylate-substituted phenolic model compounds were employed to assess their •OH photogeneration capabilities. These compounds demonstrated a substantial capacity for •OH production, exhibiting quantum yields of 0.1-5.9 × 10-3 through direct photolysis under 305 nm and 0.2-9.5 × 10-3 through a triplet sensitizer (4-benzoylbenzoic acid)-inducing reaction under 365 nm LED irradiation. Moreover, the chlorinated compounds exhibited higher light absorption and •OH quantum yields compared to those of their unchlorinated counterparts. The •OH photogeneration capacity of these compounds exhibited a positive correlation with their triplet state one-electron oxidation potentials. Molecular-level compositional analysis revealed that aromatic structures rich in hydroxyl and carboxyl groups (e.g., O/C > 0.5 with H/C < 1.5) within DOM serve as crucial sources of •OH, and chlorination of these compounds significantly enhances their capacity to generate •OH upon irradiation. This study provides novel insights into the enhanced photogeneration of •OH from chlorinated DOM, which is helpful for understanding the fate of trace pollutants in chlorinated waters.

Mechanistic and Kinetic Consideration of the Photochemically Generated Oxidative Organic Radicals in Dissolved Black Carbon Solutions under Simulated Solar Irradiation

The photochemically generated oxidative organic radicals (POORs) in dissolved black carbon (DBC) was investigated and compared with that in dissolved organic matter (DOM). POORs generated in DBC solutions exhibited higher one-electron reduction potential values (1.38-1.56 V) than those in DOM solutions (1.22-1.38 V). We found that the photogeneration of POORs from DBC is enhanced with dissolved oxygen (DO) increasing, while the inhibition of POORs is observed in reference to DOM solution. The behavior of the one-electron reducing species (DBC•-/DOM•-) was employed to explain this phenomenon. The experimental results revealed that the DO concentration had a greater effect on DBC•- than on DOM•-. Low DO levels led to a substantial increase in the steady-state concentration of DBC•-, which quenched the POORs via back-electron reactions. Moreover, the contribution of POORs to the degradation of 19 emerging organic contaminants (EOCs) in sunlight-exposed DBC and DOM solutions was estimated. The findings indicate that POORs play an important role in the photodegradation of EOCs previously known to react with triplets, especially in DBC solutions. Compared to DOM solutions, POOR exhibits a lower but considerable contribution to EOC attenuation. This study enhances the understanding of pollutant fate in aquatic environments by highlighting the role of DBC in photochemical pollutant degradation and providing insights into pollutant transformation mechanisms involving POORs.

Copper Safeguards Dissolved Organic Matter from Sunlight-Driven Photooxidation

Sunlight plays a crucial role in the transformation of dissolved organic matter (DOM) and the associated carbon cycle in aquatic environments. This study demonstrates that the presence of nanomolar concentrations of copper (Cu) significantly decreases the rate of photobleaching and the rate of loss of electron-donating moieties of three selected types of DOM (including both terrestrial and microbially derived DOM) under simulated sunlight irradiation. Employing Fourier transform ion cyclotron resonance mass spectrometry, we further confirm that Cu selectively inhibits the photooxidation of lignin- and tannin-like phenolic moieties present within the DOM, in agreement with the reported inhibitory impact of Cu on the photooxidation of phenolic compounds. On the basis of the inhibitory impact of Cu on the DOM photobleaching rate, we calculate the contribution of phenolic moieties to DOM photobleaching to be at least 29-55% in the wavelength range of 220-460 nm. The inhibition of loss of electrons from DOM during irradiation in the presence of Cu is also explained quantitatively by developing a mathematical model describing hydrogen peroxide (a proxy measure of loss of electrons from DOM) formation on DOM irradiation in the absence and presence of Cu. Overall, this study advances our understanding of DOM transformation in natural sunlit waters.

Freezing-Enhanced Photoreduction of Iodate by Fulvic Acid

Iodate is a stable form of iodine species in the natural environment. This work found that the abiotic photosensitized reduction of iodate by fulvic acid (FA) is highly enhanced in frozen solution compared to that in aqueous solution. The freezing-induced removal of iodate by FA at an initial pH of 3.0 in 24 h was lower than 10% in the dark but enhanced under UV (77.7%) or visible light (31.6%) irradiation. This process was accompanied by the production of iodide, reactive iodine (RI), and organoiodine compounds (OICs). The photoreduction of iodate in ice increased with lowering pH (pH 3-7 range) or increasing FA concentration (1-10 mg/L range). It was also observed that coexisting iodide or chloride ions enhanced the photoreduction of iodate in ice. Fourier transform ion cyclotron resonance mass spectrometric analysis showed that 129 and 403 species of OICs (mainly highly unsaturated and phenolic compounds) were newly produced in frozen UV/iodate/FA and UV/iodate/FA/Cl- solution, respectively. In the frozen UV/iodate/FA/Cl- solution, approximately 97% of generated organochlorine compounds (98 species) were identified as typical chlorinated disinfection byproducts. These results call for further studies of the fate of iodate, especially in the presence of chloride, which may be overlooked in frozen environments.

Simulated-sunlight enhances membrane aerated biofilm reactor performance in sulfamethoxazole removal and antibiotic resistance genes reduction

Membrane aerated biofilm reactors (MABRs) can be used to treat domestic wastewater containing sulfamethoxazole (SMX) because of their favorable performance in the treatment of refractory pollutants. However, biologics are generally subjected to antibiotics stress, which induces the production of antibiotic resistance genes (ARGs). In this study, a simulated-sunlight assisted MABR (L-MABR) was used to promote SMX removal and reduce ARGs production. The SMX removal efficiency of the l-MABR system was 9.62 % superior to that of the MABR system (83.13 %). In contrast from MABR, in the l-MABR, only 28.75 % of SMX was removed through microbial activity because functional bacteria were inactivated through radiation by simulated sunlight. In addition, photolysis (64.61 %) dominated SMX removal, and the best performing indirect photolysis process was the excited state of effluent organic matters (3EfOMs*). Through photolysis, ultraviolet (UV) and reactive oxygen species (ROS) enriched the SMX removal route, resulting in the SMX removal pathway in the l-MABR no longer being limited by enzyme catalysis. More importantly, because of the inactivation of functional bacteria, whether in the effluent or biofilm, the copy number of ARGs in the l-MABR was 1-3 orders of magnitude lower than that in the MABR. Our study demonstrates the feasibility of utilizing simulated-sunlight to enhance the antibiotic removal efficiency while reducing ARG production, thus providing a novel idea for the removal of antibiotics from wastewater.

Unveil the mechanism of photosensitized fluoroquinolones enhancing chlortetracycline photodegradation under simulated sunlight: Batch experiments and DFT calculation

Fluoroquinolones (FQs), as the most commonly used antibiotics, are ubiquitous in the aquatic environment. The FQs' self-sensitization process could generate reactive oxygen species (ROS), which could react with other coexisting organic pollutants, impacting their transformation behaviors. However, the FQs' influences and mechanisms on the photochemical transformation of coexisting antibiotics are not yet revealed. In this study, we found ofloxacin (OFL) and norfloxacin (NOR), the two common FQs, can obviously accelerate chlortetracycline (CTC) photodegradation. In the presence of OFL and NOR (i.e., 10 μM), CTC photodegradation rate constants increased by 181.1% and 82.9%, respectively. With the help of electron paramagnetic resonance (EPR) and quenching experiments, this enhancement was attributed to aromatic ketone structure in FQs, which absorbed photons to generate ROS (i.e., 3OFL*, 3NOR*,1O2, and •OH). Notably, 3OFL* or 3NOR* was dominantly contributed to the enhanced CTC photodegradation, with the contribution ratios of 79.9% and 77.3% in CTC indirect photodegradation, respectively. Compared to CTC direct photodegradation, some new photodegradation products were detected in FQs solution, suggesting that 3OFL* or 3NOR* may oxide CTC through electron transfer. Moreover, the higher triple-excited state energy of OFL and NOR over DFT calculation implied that energy transfer from 3OFL* or 3NOR* to CTC was also theoretically feasible. Therefore, the presence of FQs could significantly accelerate the photodegradation of coexisting antibiotics mainly via electron or energy transfer of 3FQs*. The present study provided a new insight for accurately evaluating environmental behaviors and risks when multiple antibiotics coexist.

DOM optical parameters as a tool to understand degradation of phenolic contaminants of emerging concern

Composition and source of dissolved organic matter (DOM) in water influence the rate of production of reactive intermediates (RIs), affecting the photodegradation of phenolic contaminants of emerging concern (PhCECs). However, this relationship has not been fully quantified. Here, for the first time, we propose a mechanism for photodegradation of a surrogate of PhCECs, p-cresol, in different DOM standard solutions under simulated sunlight irradiation. More importantly, the correlation of DOM optical parameters and p-cresol photodegradation kinetic parameters was determined by Pearson correlation. Results showed that indirect photodegradation was the only degradation pathway for p-cresol, mainly through reaction with excited triplet state of dissolved organic matter (3DOM*). Singlet oxygen (1O2) and hydroxyl radical (•OH) hindered degradation of p-cresol by decreasing the steady state concentration of 3DOM*. Moreover, less aromatic and smaller molecular size DOM showed higher steady-state concentration and quantum yield of 1O2, and 3DOM*, resulting in faster p-cresol photodegradation. Finally, 7 out of 8 optical parameters showed strong correlation with the p-cresol photodegradation rate constant. The mechanism and correlations found are a potential tool to predict PhCECs photodegradation in water using DOM optical parameters.

Effect of dissolved organic matter on sulfachloropyridazine photolysis in liquid water and ice

Dissolved organic matter (DOM) is an ubiquitous component of environmental snow and ice, which can absorb light and produce reactive species (RS) and thus is of importance in ice photochemistry. The photodegradation of sulfachloropyridazine (SCP) without and with DOM present in liquid water and ice were investigated in this study. The photodegradation rate constants for SCP without DOM present was enhanced by 52.5 % in ice relative to liquid water, likely due to the enhanced role of SCP self-sensitized RS in ice. DOM significantly promoted SCP photolysis in both liquid water and ice, which was mainly attributed to roles of singlet oxygen (1O2) and triplet excited-state DOM (3DOM*) generated from DOM. 1O2 production from DOM was significantly enhanced in ice relative to liquid water. Hydroxyl radical (•OH) production from DOM in ice was similar to those in liquid water. Enhancement in 3DOM* production in ice was observed at low DOM concentrations. Suwannee River Fulvic Acid (SRFA) and Elliott Soil Humic Acid (ESHA) exhibited differences in RS production in liquid water and ice, as well as in enhancement of 1O2 and 3DOM* produced in ice relative to liquid water. DOM induced reaction pathways of SCP different from those without DOM present, and therefore affected toxicity of SCP photoproducts. There were differences in photodegradation pathways of SCP as well as in toxicity of SCP photoproducts between liquid water and ice.

Metabolite diversity among representatives of divergent Prochlorococcus ecotypes

IMPORTANCE

Approximately half of the annual carbon fixation on Earth occurs in the surface ocean through the photosynthetic activities of phytoplankton such as the ubiquitous picocyanobacterium Prochlorococcus. Ecologically distinct subpopulations (or ecotypes) of Prochlorococcus are central conduits of organic substrates into the ocean microbiome, thus playing important roles in surface ocean production. We measured the chemical profile of three cultured ecotype strains, observing striking differences among them that have implications for the likely chemical impact of Prochlorococcus subpopulations on their surroundings in the wild. Subpopulations differ in abundance along gradients of temperature, light, and nutrient concentrations, suggesting that these chemical differences could affect carbon cycling in different ocean strata and should be considered in models of Prochlorococcus physiology and marine carbon dynamics.